Search Results

Search found 7277 results on 292 pages for 'sound editing'.

Page 17/292 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

• Terrible noises from subwoofer of ACER Aspire 6930 with Realtek sound chip

  - by OneWorld

  After approximately 5-15 min of listening to music my subwoofer begins to make terrible noises. He's just "coughing". That began after 6 months I had this computer. Now I found out, that I can temporarily fix this problem by "restarting" the audio stream of the application that plays music. For example reloading last.fm page (reloads the flash file). Another way to reset the audio playback is switching the speaker configuration shown below in the screenshot. According to many posts on the internet like http://www.tomshardware.co.uk/forum/52918-20-acer-aspire-6935g-speaker-problem ACER support isn't any help Exchanging hardware doesn't fix the problem Even the later models have this problem Turning off the volume of the subwoofer is not an option to me. I still have warranty (I bought an extension of one year). I already tried about 15 versions of the Realtek driver with no success. I am not sure but MAYBE the problem did not occur on the original windows vista that was shipped with this computer. However, I removed the original windows for good reasons (english). What do you suggest me? Did anyone fix this problem? Maybe by writing a script which resets the audio streams every 5 minutes? Shall I take the effort to deal with the acer support until they give me another model? (I won't have a computer than for a longer time, will spend money on telephone hotlines (1,30 EUR / min)......) Here are additional infos, if they are any help: Windows 7 64 Bit (Original was Windows Vista Home Premium 32 Bit) All specs Audio driver version:

  Read the article

• Free MPEG cutting/cropping/editing tool

  - by Stijn Sanders

  I'm looking for a free tool to cut MPEG's that are created by recording from a USB cable receiver. There are a number of applications that do this, and some are free, but most of them take the video and audio decoded and pass them into a codec again to write the final output. I already have the MPEG's encoded the way I like, so what I need is a tool that can strip the beginning and the ending of the recording before and optionally commercial breaks, by rearranging the data within the file, not re-encoding it. Now I'm using some old software that came with the cable-receiver, but this actually re-encodes the video when exporting. I've tried VirtualDub but had major trouble getting the audio and video streams to stay in sync (and this was also re-encoding)... I found this which comes pretty close, but doesn't allow much accuracy in selecting cut positions.

  Read the article

• Sound entirely stopped working on Windows 8 on a Macbook Pro

  - by Kelvin Bongers

  I am currently running Windows 8 (downloaded from DreamSpark) on a Macbook Pro. This worked fine for a while but suddenly all audio stopped working. When I go to "Playback devices" and hit "Test" on the speakers I get treated with the following message: This also shows up right after I try restarting. I tried disallowing exclusive usage of the devices but it makes no difference. Edit: After some looking around I tried changing the sample rate and bit depth so I would get a dialog screen to force Windows to go around the program that's using it. I did get the dialog but then instead of changing it I got the following error: Edit 2: I narrowed it down to a single service failing to start, the Multimedia Class Scheduler service fails to start with the following error:

  Read the article

• Explaining odd sound effects during BSOD

  - by bizzz

  Hello, over the years of using Microsoft operating systems, I many times encountered the situation that I only now want to understand. When you get BSOD while listening to music, there is a short period of time (1-2 sec), when screen freezes and the last part of music is repeated several times, before everything falls into blue abyss. Today I became very curious about mechanics behind this situation - what makes that certain part of audio to loop? I beg you, kind sirs, to satisfy my curiosity.

  Read the article

• Ripping sound from online video through soundcard?

  - by overtherainbow

  Hello There are a couple of videos on the Web whose soundtracks I'd like to rip so I can listen to them at the gym, but all of the web apps like KeepVid that I tried failed downloading them. As a work-around, I'll just play the videos and record the soundtrack for later listening. Are there good applications for Windows, free or affordable, that will let me record whatever is being played on the soundcard? Thank you.

  Read the article

• Mass editing videos on Ubuntu?

  - by rick

  Hi, I'm trying to add a watermark and a credits image to all of my old videos. I downloaded them off YouTube so they are all flv (H.264?). Is there some software that will allow me do simple edits in batches? I know a little bit of Python and tried looking at some of the library but they all seem like overkill (and way above my head). So is there a solution besides getting some software and going through all my videos and doing it manually? They are all mostly the same length, but it would be nice to specify a relative position for my credits. e.g. show a static image for 10 seconds when the video is at 95%

  Read the article

• How can I automatically lower Spotify playback volume when my Video Editing program makes a sound?

  - by Mark Major

  I'd like to listen to Spotify while I am video editing. This is just casual listening - nothing to do with the editing work. How can I automatically fade out the volume of Spotify when my video editing program plays audio? I often need to hear the video editing audio without the distraction of Spotify playing over the top, but the video editing playback is too on/off/on/off to switch Spotify audio manually each time. Without background music, I get really sick of the repeated playback of the audio clips with only silence inbetween. I suppose what I needd is an app that monitors sound output from 'App A' and reduces the sound output from all others (Apps B, C, D, etc) when something is played.

  Read the article

• video editing tool to color overlay a specific part

  - by Santosh

  I have downloaded a video from YouTube. But the uploader has put some link (their twitter and facebook) for promotional purpose. The links keeps coming up through out the video in the black area (up and down of the video which are black). Thank god that links are on the black part of the video otherwise it would be hard to remove.    Also I want to remove the the last few seconds of the video. I don't want to crop that part. The video is in MP4 format. I don't want to lose the quality in anyway, I won't mind if the file size increases. I want a opensource and free tool. Good if it is available to both Windows and Ubuntu. Here is a link to the video.

  Read the article

• Mute all software when another is playing sound.

  - by rnaud

  Is there a way to tell my computer to pause or mute the music when I'm starting a video ? And to restart, when I pause the video.

  Read the article

• How to boost system sound output?

  - by infant programmer

  When I use Earphones, I feel that my system output is very low, I have set all the volume output to maximum in "control panel\Sounds and Audio devices", but still not satisfactory. May be my earphones output proportionality is lower. No problem with sub-woofer, I think its because of the amplifier. Is there any software to boost up system volume output to compensate ?

  Read the article

• Sound leaks from speaker even when headphones are inserted

  - by instantsetsuna

  I've a Dell Optiplex 960 (which I presume has a speaker inside the tower). This speaker is normally in use whenever I play music (lets call this "tower speaker"), and when I insert my headphones in the 3.5mm jack (of the tower), the tower speaker stops and the music is played through the headphones (an obvious thing to happen). But sometimes, the tower speaker starts playing the music even when the headphones are inserted! So, the music is played through both of them! This gets quite embarrassing. So, my question is - Is there a way to turn off this "tower speaker"? EDIT : I'm using Windows XP

  Read the article

• Editing the context menus for folders and files in Windows XP

  - by NT

  In Windows XP, with SP 2, is there a way to make changes to the right-click menus for folders and files--e.g., to add, delete, or reorder items and dividing lines?

  Read the article

• Editing files on linux server from windows

  - by celicni

  I want to edit text files on Linux server from Windows, using text editor like Notepad++ or UltraEdit. I've managed to do so using WinSCP. It can edit files remotely and offers me to choose local application to open those files. That is exactly what I need, but when I hit ctrl-s (not every time, in about 50% cases), it waits for around 10 seconds, alerts that connection has failed, and offers me to "abort". When I click abort, it instantly reconnect and save file. So does anybody knows any other way to edit files remotely without this annoying waiting period.

  Read the article

• Live Code Editing

  - by alvincrespo

  Anyone know of a code editing platform that allows users to collaborate in a live environment? For example, google docs but for editing PHP code with others?

  Read the article

• How to turn off Libnotify notifications only when sound is in muted state?

  - by Michael Butler

  I have a multimedia keyboard that allows me to easily mute the sound (Ubuntu 12.04). It would be nice to "link" this to also turn off libnotify messages that pop-up in the top right corner (i.e. Pidgin messages). So when Ubuntu is muted, no libnotify messages would pop up. When not muted, messages show as normal. Is this possible with a script of some kind or would it require changing source code?

  Read the article

• How to play sound in Python WITHOUT interrupting music/other sounds from playing

  - by Morlock

  I'm working on a timer in python which sounds a chime when the waiting time is over. I use the following code: from wave import open as wave_open from ossaudiodev import open as oss_open def _play_chime(): """ Play a sound file once. """ sound_file = wave_open('chime.wav','rb') (nc,sw,fr,nf,comptype, compname) = sound_file.getparams( ) dsp = oss_open('/dev/dsp','w') try: from ossaudiodev import AFMT_S16_NE except ImportError: if byteorder == "little": AFMT_S16_NE = ossaudiodev.AFMT_S16_LE else: AFMT_S16_NE = ossaudiodev.AFMT_S16_BE dsp.setparameters(AFMT_S16_NE, nc, fr) data = sound_file.readframes(nf) sound_file.close() dsp.write(data) dsp.close() It works pretty good, unless any other device is already outputing sound. How could I do basically the same (under linux) without having the prerequisite that no sound is being played? If you think the process would require an API to ensure software mixing, please suggest a method :) Thx for the support

  Read the article

• code to play sound programmatically using a button on the iphone

  - by Brandon

  I am trying to figure out how to hook up a button to play a sound programmatically without using IB. I have the code to play the sound, but have no way of hooking the button up to play the sound? any help? here is my code that I'm using: - (void)playSound { NSString *path = [[NSBundle mainBundle] pathForResource:@"boing_1" ofType:@"wav"]; AVAudioPlayer* myAudio = [[AVAudioPlayer alloc] initWithContentsOfURL:[NSURL fileURLWithPath:path error:NULL]]; myAudio.delegate = self; myAudio.volume = 2.0; myAudio.numberOfLoops = 1; [myAudio play]; }

  Read the article

• Some help with basic Sound functions in actionscript 3

  - by danwoods

  Hello all. I'm working on a mp3 player and I'm super new at all things flash so there are lots of questions. Currently I'm getting stuck on the track change. My variable declaration look like this: var index:int = -1; var music:Sound = new Sound(new URLRequest("moe2008-05-24d02t02_vbr.mp3")); var sc:SoundChannel; var isPlaying:Boolean = false; and my change track function looks like this: function changeTrack(newTrack){ sc.stop(); isPlaying = false; music = new Sound(new URLRequest(newTrack)); sc = music.play(); isPlaying = true; index++; } Does anyone see any obvious errors??? Thanks

  Read the article

• looking for help with Flash sound to play on an iPad

  - by phm

  I hope you might be willing to help me. Years ago, when I was designing a game site, it was recommended to me to do what you pretty much suggested in your answer to a question about Flash sound: put my sound effects as Flash elements. This works great on every platform except the iPad. Do you have any idea what I should do? I'd really appreciate your help and you sound like a helpful person. Some people here can be kind of mean. I'm not a programmer by training, just self taught.

  Read the article

• Multiple Audio Issues

  - by Lerp

  I am having issues with my audio on Ubuntu 12.04, I will try and give as much detail as possible so sorry if there's too much detail. The Problem Audio plays from both speakers and headphone regardless of what connector I choose and regardless of the profile I use. The microphone is constantly being played through headphones & speakers. The headphone audio is extremely quiet but plays from both ears when I select "Headphones" for the connector in Sound Settings. The headphone audio only plays from one ear and is quiet (but not as quiet as above) when I select "Analogue Output" for the connector in Sound Settings. I can only select "Headphones" as the connector in Sound Settings if I set the profile to either "Analogue Stereo Output/Duplex", all others only allow me to choose "Analogue Output" for the connector. Despite the headphone sound issues, the speaker sound is fine apart from the fact that I am not able to select which output is used, they just both play. My headphone and microphone are plugged into the front and my speakers are plugged into the back. What I have tried I have put everything in alsamixer to 100 apart from "Front Mic Boost" which I have set to 0. Command Output aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 2: AD198x Headphone [AD198x Headphone] Subdevices: 1/1 Subdevice #0: subdevice #0 arecord -l **** List of CAPTURE Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 2/3 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xf7ff8000 irq 70 cat /proc/asound/modules 0 snd_hda_intel cat /proc/asound/card*/codec* | grep "Codec" Codec: Analog Devices AD1989B cat /etc/modprobe.d/alsa-base.conf # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 Hopefully I have provided enough information, I will happily provide anymore information needed. Thank you. Update Reinstalling alsa-base and pulseaudio fixed the headphone issues I was having.

  Read the article

• Sharing soundcard to network.

  - by zerkms

  Let's suppose I have a laptop (L) and desktop PC (D), both with Windows 7 onboard. It is SB X-Fi extreme soundcard with rather good 5.1 home theater connected. But it is not comfortable to watch video sitting on the sofa from my desktop (sofa is in the center of the room and D is in the corner), even though it is 23" monitor. So I'm watching everything from the laptop. So the question - is it possible somehow to "share" soundcard from D to L, so I will watch the video from notebook and listen the sound from the 5.1? L and D are connected via wi-fi (fast enough).

  Read the article

• What sound cards are there besides Creative's that offer benefits for gaming?

  - by Vilx-

  Many years (6? 7?) ago I bought an Audigy sound card to replace the onboard sound and was astonished at the improvement in games. It was a completely different sound, the whole experience became way more immersive. As the time has passed however the card has become old. The support for the latest Windows versions is declining and newer technologies have definitely been developed. So I was starting to wonder - what newer hardware exists? Sure, there is the Sound Blaster X-Fi, but that's quite expensive and I'm not entirely thrilled by past policies of Creative either (like the whole affair with Daniel_K). But are there any alternatives? EAX is a patent by Creative, so it's doubtful that any other manufacturer has implemented it. And I haven't heard of any competing standards either. To clarify, what I would like is something like a "sound accelerator". A sound card that would offload sound processing from my CPU while at the same time giving astounding effects that would be impractical to do on CPU in the first place. I'm not interested in absurd sampling rates (for the most time I can't tell MP3 and a CD apart) or uncountable channels (I'm using stereo headphones). But I am interested in special effects in games. Are there any alternatives or is Creative a monopoly in this market?

  Read the article

• Lubuntu upgrade to 13.04 killed sound with ALSA. How to troubleshoot?

  - by Sven

  After upgrading to 13.04 from 12.10 Lubuntu lost audio playback after unplugging usb soundcard (Polycom) and plugging it back in. Volume control was gray and leading to pulseaudio mixer (not installed) so I uninstalled the pulseaudio package. I also removed and reinstalled the alsa-base package. After restart I have the alsamixer back everything seemingly as usual(volume 100%, unmute) but every sound program gets me errors no matter what device I select. aplay -L: null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server default:CARD=NVidia HDA NVidia, ALC662 rev1 Analog Default Audio Device sysdefault:CARD=NVidia HDA NVidia, ALC662 rev1 Analog Default Audio Device front:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Front speakers surround40:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Digital IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=NVidia,DEV=0 HDA NVidia, HDMI 0 HDMI Audio Output dmix:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample mixing device dmix:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample mixing device dmix:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct sample mixing device dsnoop:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample snooping device dsnoop:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample snooping device dsnoop:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct sample snooping device hw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct hardware device without any conversions hw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct hardware device without any conversions hw:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct hardware device without any conversions plughw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Hardware device with all software conversions plughw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Hardware device with all software conversions plughw:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Hardware device with all software conversions default:CARD=Communicator Default Audio Device sysdefault:CARD=Communicator Default Audio Device front:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Front speakers surround40:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 4.0 Surround output to Front and Rear speakers surround41:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio IEC958 (S/PDIF) Digital Audio Output dmix:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct sample mixing device dsnoop:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct sample snooping device hw:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct hardware device without any conversions plughw:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Hardware device with all software conversions etc/asound.conf: defaults.ctl.card 1 defaults.pcm.card 1 defaults.pcm.device 1 Following gets same result with both devices. aplay -vv -D front:CARD=NVidia,DEV=0 "Release the Pressure.wav": Playing WAVE 'Release the Pressure.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono aplay: set_params:1087: Channels count non available Guayadeque mp3 playback: AL lib: alsa_open_playback: Could not open playback device 'default': No such file or directory 21:32:14: Error: Gstreamer error 'Configured audiosink playbackbin is not working.' Audacious: ALSA error: snd_mixer_attach failed: No such file or directory. ALSA error: snd_pcm_open failed: No such device. So How do I fix my audio? UPDATE: I removed the usb soundcard and got rid of all alsa config. Everything is working as before the install but it sure feels fragile.

  Read the article

• How do I get 5.1 surround sound working on an Acer Aspire 5738ZG?

  - by kbargais_LV

  I got a problem with sound. I tried everything but no results. :( I got 3 sound ports. my daemon: # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0

  Read the article

• Best way to trigger editing and dynamically show editing features? [on hold]

  - by Tim Marshall

  Page In Question: http://rafflebananza.com/admin/StatisticalData/expenses/expenses.html Hiya Everyone, On my page, I have an 'Actions' drop down to the top-right hand side of the page. This actions drop down I would like to have an action to 'Enable Editing'. Upon clicking to enable editing, I would like a PHP variable modified from 'EnableEditing = false' to 'EnableEditing = true'. Why I would like to use PHP maybe questionable, here is why I would like to use PHP under my understanding to clarify; Sections on my page will show to different administrators depending on their level. Upon enabling editing mode, certain contents will then dynamically. <?php if ($_SESSION['user_level_status'] < 2) { if ($editing = enabled) { show this } else { show this } } ?> Something similar to this, I'm new at PHP so this may look incorrect. The question really is, is PHP the correct language to use to trigger editing and how can I do this please? Best Regards, Tim

  Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >