Search Results

Search found 592 results on 24 pages for 'spinning plate'.

Page 17/24 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

  • Strange performance differences in read/write from/to USB flash drive

    - by Mario De Schaepmeester
    When copying files from my 8GB USB 2.0 flash drive with Windows 7 to a traditional hard drive, the average speed is between 25 and 30 MB/s. When doing the reverse, copying to the USB drive, the speed is 5MB/s average. I have tested this with about 4.5GB of files, a mixture of smaller and larger ones. The observations were the same on both FAT32 and exFAT file systems on the USB drive, NTFS on the internal hard disk. I don't think I can be mistaken in saying that flash memory has a lot higher performance than a spinning hard drive in both terms of reading and writing. For both memory types, reading should be faster than writing too. Now I wonder, how can it be that copying files from a fast read memory to a faster write memory is actually slower than copying files from a fast read memory to a slow write memory? I think that the files are stored in RAM before being copied over too, and there's caching as well, but I don't see how even that could tip the balance. It can only be in the advantage of writing to the USB drive, since it is "closer" to the SATA system than the USB port and it will receive data from the internal SATA HDD faster. Perhaps my way of thinking is all wrong or it just depends on the manufacturer of the USB pen. But I am curious.

    Read the article

  • What do different patterns mean in Windows 8 file copy dialog

    - by MainMa
    When copying or extracting files, Windows 8 shows the chart with the speed of the operation. I noticed several patterns: Randomness, High speed at the beginning, then low speed during the most part of the operation, Mostly constant speed. 1. Randomness/nice mountains. 2. High speed at the beginning, then low speed during the most part of the operation. 3. Low speed at the beginning, then high speed during the most part of the operation. (Similar to the previous image, but inverted) 3. Mostly constant speed. (Same as previous image, but without the fast start) I'm curious, what each of those patterns mean? Do some indicate that there may be a problem with hard disk performance? Why the nearly constant speed is so rare, even when copying a single large file from and to a spinning drive, or when copying a single large file or a bunch of small files from and to an SSD?

    Read the article

  • ASUS M51SE freezes for no apparent reason

    - by Piotr Justyna
    First of all, it's my first question on superuser so please excuse me if it doesn't belong here, a similar one has already been posted here or if I missed some details. My ASUS M51 freezes up. It all started a couple of months ago and I basically forgot about it since I bought a new laptop around that time. This is, however, bugging me since then and I can't explain why it's happening. Let me quickly describe what's wrong. When switched on and running (win 7) it freezes after a couple of minutes of normal usage (or even if I don't actually do anything). By 'freezes', I mean it's like a static image of my desktop was being displayed on the screen. Nothing happens, alt+ctrl+del doesn't help, I basically have to switch it off using a power button. I tried to remove the hard drive and to start the laptop without it. The same here - it freezes on the the initial black loading screen (a couple of minutes after the computer says it can't find the hdd) I tried to remove RAM - the same thing. All fans are spinning as they should. I cleaned the fans using a small paintbrush but it doesn't change anything. The laptop is generally clean and in pretty good physical shape. Well, almost, obviously :). One possible clue I can think of is that the laptop is heating excessively even when it doesn't actually do anything (hdd removed). Do you have any ideas what is the cause of this or what else can I try? Thanks, Piotr

    Read the article

  • Vista gets stuck in an endless loop while booting

    - by Mason Wheeler
    I put my laptop to sleep last night, and when I woke up this morning... it didn't. So I tried to reboot, and everything went fine until it got to the Vista splash screen, where it's supposed to display the logon. Here, it hits an endless loop: Display the cursor with the blue spinny thing that replaced the hourglass, for 5-10 seconds Display "Please wait..." for about half a second Screen flashes to black, then quickly back to the Vista splash screen Goto step 1 The whole time, my hard LED is on almost non-stop. I can boot into Safe Mode... sometimes. Sometimes it'll load all the drivers, then sit there for about 10 minutes, spinning the hard drive non-stop, then reboot with no warning. I tried booting to Last Known Good Configuration. Didn't fix anything. When I've managed to get into Safe Mode, I tried running CHKDSK. Didn't fix anything. I tried running System Restore to each of my last two restore points. Didn't fix anything either time. I ran a virus scan. Didn't find anything. I tried calling the manufacturer (Alienware), only to discover that my warranty expired last freaking week and now I can't get it fixed without paying exorbitant sums of money. I'm about at my wits' end here. Has anyone seen this problem before? Does anyone know how to fix it? Does anyone know a solution that does not involve reinstalling the OS and losing an entire year's worth of program installations, Windows Updates and configuring and tweaking things until it's working just like I want it to?

    Read the article

  • How harmful is a hard disk spin cycle?

    - by Gilles
    It is conventional wisdom¹ that each time you spin a hard disk down and back up, you shave some time off its life expectancy. The topic has been discussed before: Is turning off hard disks harmful? What's the effect of standby (spindown) mode on modern hard drives? Common explanations for why spindowns and spinups are harmful are that they induce more stress on the mechanical parts than ordinary running, and that they cause heat variations that are harmful to the device mechanics. Is there any data showing quantitatively how bad a spin cycle is? That is, how much life expectancy does a spin cycle cost? Or, more practically, if I know that I'm not going to need a disk for X seconds, how large should X be to warrant spinning down? ¹ But conventional wisdom has been wrong before; for example, it is commonly held that hard disks should be kept as cool as possible, but the one published study on the topic shows that cooler drives actually fail more. This study is no help here since all the disks surveyed were powered on 24/7.

    Read the article

  • some windows 8 metro (modern UI) apps don't open, but live tiles DO work

    - by DiegoDD
    Some of my default windows 8 metro (modern UI) apps don't work properly, the apps are the Weather and the News apps. when I open them, I only get the loading screen, that is, the big colorful screen with the logo in the center, and the "loading" spinning dots. They just keep like that forever and never actually open. There are no error messages or anything. The strange this is that the live tiles for those apps DO work and show current information. current weather for my location (saved before they started failing) and current news. Both apps did work well in the past, and every other default windows 8 app I've tried work well (both live tiles and the app itself). Every other non-default apps that I've downloaded still work correctly, so the problem so far is only with those two apps. (weather and news). I really don't know since when exactly they started to fail because I really don't use them (or any metro app) that often, so I can't recall if I did something like installing some other app, either metro or regular, or messed with some drivers, etc. they simply don't open now, but they DID work before. any ideas?

    Read the article

  • How harmful is a hard disk spin cycle?

    - by Gilles
    It is conventional wisdom¹ that each time you spin a hard disk down and back up, you shave some time off its life expectancy. The topic has been discussed before: Is turning off hard disks harmful? What's the effect of standby (spindown) mode on modern hard drives? Common explanations for why spindowns and spinups are harmful are that they induce more stress on the mechanical parts than ordinary running, and that they cause heat variations that are harmful to the device mechanics. Is there any data showing quantitatively how bad a spin cycle is? That is, how much life expectancy does a spin cycle cost? Or, more practically, if I know that I'm not going to need a disk for X seconds, how large should X be to warrant spinning down? ¹ But conventional wisdom has been wrong before; for example, it is commonly held that hard disks should be kept as cool as possible, but the one published study on the topic shows that cooler drives actually fail more. This study is no help here since all the disks surveyed were powered on 24/7.

    Read the article

  • How to uninstall files and software from a Solid State Drive (SSD)

    - by jasondavis
    I am using a SSD drive just as a main Operation system and software drive. I have a regular spinning disk for data files. I have read that files are not REALLY deleted from a SSD drive when you "delete" them. So here is my situation and hopefully I can get some good advice. Let's say I have Windows 7 Pro x64bit installed on my 80gb Intel SSD. I then have Adobe Photoshop CS4 installed along with 50 other programs installed onto this SSD. I then decide I am done with Adobe Phjotoshop CS4 and want to remove it. I then decide I want to install another version of Adobe Photoshop and a few other software titles. Would I just do the usual, add/remove software from the windows control panel. Or if the software being removed has an "Uninstall" program to run, then run it and uninstall the software? I realize that all this WILL remove the software from Windows 7 but I am wanting to know if there is additional steps that should be taken since it is a solid state drive (SSD)?

    Read the article

  • Mac OS Leopard: SyncServer process constantly using 100% CPU

    - by macca1
    I am running Leopard that I upgraded from Tiger. I've been noticing that every once in a while the SyncServer process starts up and eats up all the CPU. The fans will start going at full blast and the laptop will slow down to a crawl. I need to force quit the process from Activity Monitor to get it under control. It disappears for a while, but eventually gets started again. I do have an iphone as well that I sync so I'm wondering if syncServer might be an apple process checking for my phone plugged in. Edit: Tried iSync and the manual resetsync as suggested, but got this output: Vince-2:~ vince$ /System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync.pl full 2010-03-12 08:03:50.230 perl[176:10b] SyncServer is unavailable: exception when connecting: connection timeout: did not receive reply PerlObjCBridge: NSException raised while sending reallyResetSyncData to NSObject object name: "ISyncServerUnavailableException" reason: "Can't connect to the sync server: NSPortTimeoutException: connection timeout: did not receive reply ((null))" userInfo: "" location: "/System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync.pl line 16" ** PerlObjCBridge: dying due to NSException Vince-2:~ vince$ And during that syncServer started spinning up 95-100% just like it always does.

    Read the article

  • prevalent, recurring hardrive failure intel macbook from 2006/2007

    - by SimonSalman
    Hi, Long story: My MacBook's hard drive failed one year ago, just a month after its warranty ended or: a year and a month after I bought it. After about ten phone calls to Apple's service, they agreed to extend the warranty for another year, so that I got it replaced free of charge. In the mean time, I got to know that many MacBook users that experience/report hard drive failures. Every reported crash was preceded by a slowdown of system performance, an increased occurrence of the spinning beach ball wait courser, and frequent crashes of applications that used to run very robust until then. It happened (as far as I know) with MacBooks from 2006/2007. All these MacBooks additionally suffer from a recurring wearing down of their "top case". Many heavy users had to replace their HDDs three time since 2006/2007 resulting in an head crash, making it impossible to recover data (diagnosis of recovery specialists) in most but not all cases HDD was Seagate (doesn't necessarily have to be the cause, if majority of the MacBook charge contained Seagate drives) And right now (one year after my first disk crash), these symptoms are cumulating on my system, again ... Short version: prevalent hard drive failure on MacBook charge from 2006/2007 (i.e. 2.16 GHz Intel Core 2 Due) I am looking for any (preferable open source) tool for checking the hard drive condition, especially to detect the known "MacBook problem". So, that I can replace the disk on time. If any Mac user found a solution to prevent the repeated failure of heir hard drive, I would be very glad to get to known it. I really enjoy my old MacBook, but I hate to get interrupted every year by an HDD crash. BTW, the issue is already in discussion for a long time, but there seems to be no solution, so far. Thanks, Simon

    Read the article

  • Blinking power button

    - by Mike Ramsey
    A friend asked me to look at his Gateway DX4640 desktop. When he presses the power button, power goes to the mobo (NVIDIA nForce 630i MCP73PV, GeForce 7100 chipset) and the CPU fan starts spinning. The power button slowely blinks on and off (blue) and the screen briefly says no signal and then goes black. And nothing else; no post code beeps. My initial two conjectures were: 1. Vista was stuck in sleep/hibernation mode, or 2. A power off had left the mobo in a bad state. The fix for both is to: a) Unplug the AC power cord b) hold the power button for 30 second to fully discharge the mobo It didn't help. I left the system unplugged from AC power for an hour. No change. I am out of ideas. Has anybody seen anything like this before? What does a blinking blue power button mean? How can I get more data points to guide trouble shooting? --Thank you, --Mike

    Read the article

  • Disk Error on Boot (Possible boot sector issue)

    - by Choco
    I own a 4-5 year old Dell Dimension E510 with Windows XP: Media Center Edition. I have 2 drives installed: C Drive: Windows XP: Media Center Edition G Drive: 2 partitions: Windows 7 (beta) Windows XP (professional) That is also the order they are connected. The C Drive is my primary drive. When I attempt to boot the computer, the bios loading screen appears normally; the progress bar moves and it's fine. The very next page, however, supposed to be a boot choice. When I installed Windows 7 onto the G Drive in context of the C drive it added a boot selector to the C drive's boot sequence. It gives me the option of booting Windows 7 or Windows XP: Media Center Edition. However, my problem is now this: After the bios screen I previously mentioned, instead of a boot selector, I receive the following error: A disk read error occurred. Press CTRL+ALT+DEL to restart. The drive is spinning up normally. I hear no odd noises/clicks/scraping coming from it, even after disabling the other drive to listen to it carefully. According to me, it's a boot sector issue. I have never experienced this before, but maybe during a recent shutdown, Windows XP: MCE errored out and ruined the boot sector. Dilemma! I don't have the Windows XP: MCE disc, because it was installed by the factory. I have accessed the hidden partition on the drive before (you hit a key combination on the bios screen and it comes up with an interface to fix your drive). However, I don't want to reformat the drive (which is what the interface gives me the option to do). I want to possibly fix the boot sector. How can I achieve that?

    Read the article

  • No video signal and server shuts down

    - by Ilya
    I have a brand new server. The motherboard is Intel S2600CP4, two 8-core Intel E5-2600 processors. RAM is 8 DIMM slots of 8 GB each (KVR1600D3D4R11SK4/32GI, I installed them into the blue slots), Power supply is 1050W Corsair. Most of the time the server won't start up - the fans are spinning, but I don't have video signal. And it keeps restarting on its own every 3 mins. But maybe after 30 mins it will eventually load and show something on the screen. I even was able to install ESXi 5.0 (vSphere) on it. It recognizes both CPUs and all of the 64GB of RAM. But even then it worked only for around 5 hours and then restarted on its own. What's the problem? That's a very expensive peace of hardware and I can't afford purchasing a new motherboard/CPU. By the way, on the front panel the "System Status" LED is constantly amber (not blinking), even when the server started successfully. And also in the BIOS I can see lots of "processor 01 unable to apply microcode update 8160" fatal errors. Please help me with issue, I will really appreciate this!

    Read the article

  • No power save on external hard drive - How to implement?

    - by blastawaythewall
    I recently bought a new 3.5" USB external hard drive which I thought had a power save feature on it, but it turns out that it doesn't. So whether it's being used or not, it spins, which wouldn't be a problem if it wasn't so loud and didn't get really really hot. After doing some research, it seems like what controls this is the enclosure of the hard drive and not the drive itself or the OS (although I suspect that's not entirely true). I attempted to use the "hdparm" utility but it couldn't identify my externals. Just to be clear, I'm defining power save as a hard drive spinning down after a certain time period of not being used (read from/written to). Also, I have other externals that do this, so it's not a problem from my computer. Here's my question: Is there a way to implement a power save-like feature on my hard drive through software, OS settings, or anything else? Here's some details: Running: Windows XP Home SP2 HD Model: Cavalry CAUM-B-OTB 2TB (although the website only lists 1TB max) Inside: Hitachi Deskstar 7K2000 (HDS722020ALA330) (I would link, but new users can only post 1) Thanks in advance.

    Read the article

  • Disaster recovery backup of files/photos for personal use

    - by Renesis
    I'm looking for the best method to store a backup of important files and 5+ years of digital photos that is safe from some type of fire/flood disaster in my home. I'm looking for: Affordable: Less than $100/yr or first-time cost. Reliable: At least a smaller chance of failing than there is of fire or flood Easy for initial backup and to add to, and at least semi-easy to recover. I recently purchased a small home safe for physical vitals. It was inexpensive, solid, and is fire/water safe. If I had a physical copy of the digital files, the safe would work fine for this, but I don't know what to store in it that adequately meets the requirements above. Hard drive - I read that the danger of it not spinning up makes a hard drive a bad choice for this type of storage, although it was my first thought and would definitely be the simplest choice - very easy to take out once a month and add files to. DVDs - Way too much of a hassle for both backup and restore. Tape - No idea on the affordability of this option Online - Given that I have at least 300GB already and ever-increasing megapixels means ever-bigger files, and my ISP upload is about 2Mb at the best, this just doesn't sound like a good option for me, but I could be convinced. Other - Have I missed something? Also, I'm already covered both for sync between computers (Dropbox) and a nightly backup of these files (External HDD). The problem with the nightly backup is obviously that it's always with the computer and in a disaster would be destroyed along with it. Is anyone else doing something similar? Is the HDD as poor of a choice as I read, or is it a feasible option? Maybe two to reduce the likelihood of failure?

    Read the article

  • How do I fix a super slow MacBook?

    - by MakingScienceFictionFact
    I'm running a black MacBook 4.1. Intel Core 2 Duo @ 2.4 GHz, 2 GB RAM, 250 GB hard disk drive, bus speed is 800 MHz. It's about three years old in excellent shape externally. I treat this thing like a baby. It used to run awesome, but now it's super slow at everything. I get the spinning pizza of death constantly. It takes a long time to boot up or load any program, even Safari and iTunes. iPhoto is terribly slow. The Internet doesn't work properly and it reminds me of a buggy PC. I've formatted it and re-installed Mac OS X 10.6 (with all updates), and I've done the disk repairs process. As an iOS developer this is driving me crazy, but luckily I have an iMac to work on in the day which is fast. I'm ready to format it again, but that didn't work last time. After the last format, I copied back files from an external drive so maybe the offending files were hidden in there somewhere. Here are the hard disk drive and RAM specifications. It is upgrade-able to 4 GB of RAM. Hard disk drive: The Fujitsu Mobile MHY2250BH is a 250 GB, standard hard disk drive. Its burst transfer rate is 150 Mbyte/s. This is a 5400 RPM drive and comes with an 8 MB buffer. RAM: two sticks of 1 GB DDR2 SDRAM, speed: 667 MHz.

    Read the article

  • New build won't boot: some fans turning, no beep or video

    - by Dave
    When my new system is powered up, the case fan and power supply fans turn fine. The CPU fan twitches, but never gets going. Although I've heard that with AMDs and Gigabyte motherboards that is not necessary a problem. Hard drive is spinning. However, there is absolutely no indication that anything else is happening. The motherboard, as far as I can tell, does not have an internal speaker, but I harvested one from another machine and plugged it in and still no beeps at all. The monitor screen stays black, on both the integrated VGA and DVI. This is a brand new build, and has never successfully booted. My parts are: AMD Athlon II X2 245 Regor 2.9GHz Socket AM3 65W Dual-Core Processor Model ADX245OCGQBOX - includes CPU cooler) GIGABYTE GA-MA785GPMT-UD2H AM3 AMD 785G HDMI Micro ATX AMD Motherboard - Retail G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL8D-4GBRM - Retail CORSAIR CMPSU-400CX 400W ATX12V V2.2 80 PLUS Certified Compatible with Core i7 Power Supply - Retail SAMSUNG Spinpoint F3 HD502HJ 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive COOLER MASTER Elite 341 RC-341C-KKN1-GP Black Steel MicroATX Mid Tower Computer Case - Retail I also have a DVD burner, but it acts the same whether that is plugged in or not. I'm using the on board video. What I've tried so far: I've switched power supplies, with no difference. I've tried different monitors (of which all are working on other machines) with no difference. I have tried putting it one memory module at a time, with no difference. I have tried the absolute minimum I can think of (power supply into motherboard, power button ONLY plugged into front panel, CPU fan plugged in), with no difference. I appreciate any ideas anyone might have. Do I need to RMA the motherboard? This is my first build, so there might be something obvious. I was very careful in assembly with static; I'm confident nothing was zapped during assembly.

    Read the article

  • Application (was Firefox) crash on first load on Ubuntu Linux on older Dell Laptop

    - by Ira Baxter
    I've had a Dell Latitude laptop since about 2000 without managing to destroy it. A month ago the Windows 2000 system on it did something stupid to its file system and Windows was completely lost. No point in reinstalling Windows 2000, so I installed an Ubuntu Linux on the laptop. Everything seems normal (installed, rebooted, I can log in, run GnuChess, poke about). ... but ... when I attempt to launch Firefox from the top bar menu icon, I get a bunch of disk activity, the whirling cursor icon goes round a bit and then (WAS: everything stops: icon, mouse. Literally nothing happens for 5 minutes. Ubuntu is dead, as far as I can tell. EDIT : on further investigation, spinning icon, mouse operated by touchpad freeze. There's apparantly a little disk activity occuring about every 5 seconds. I wait 5-10 minutes, behavior doesn't change) A reboot, and I can repeat this reliably. So on the face of it, everything works but Firefox. That seems really strange. The only odd thing about this system when Firefox is booting is that while it has an Ethernet port (that worked fine under Windows), it isn't actually plugged into an Ethernet. As this is the first Firefox boot since the Ubuntu install, maybe Firefox mishandles Internet access? Why would that crash Ubuntu? (I need to go try the obvious experiment of plugging it in). EDIT: I tried to run the Disk manager tool, not that I cared what it was, just a menu-available application. It started up like Firefox, I get a little tag in the lower left saying Disk P*** something had started, and then the same behavior as Firefox. At this point, I don't think its the Ethernet. Is it possible that the Ubuntu disk driver can't handle the disk controller in this older laptop? The install seemed to go fine.

    Read the article

  • Computer sending data while turned off

    - by Nicklas Ansman
    I have a some what strange problem (which could have and easy and obvious solution for all I know). My problem is that when I've booted ubuntu (now 10.4 but same problem with 9.10) and turns it off it starts sending a HUGE amount of data via the ethernet cable, so much in fact that my router can't handle it and stops responding. As far as I can tell the computer is completely turned off with no fans spinning. I can add that if I boot windows I do not have this problem, just when exiting ubuntu. There are two "fixes" for my problem: Pull the ethernet cable until the next boot Turn off power to the PSU and wait for the capacitors to unload Is there anyone who knows what could be going on? I'd be happy to post some logs or conf-files. Currently I'm using the ethernet port on my motherboard which is a Asus P6T Deluxe V2 with an updated version of the BIOS (maybe not the latest but since it only happens when I've been in ubuntu I don't wanna mess with the BIOS too much). Regards Nicklas ---------Update 1---------- The router is a D-Link DIR 655 with the latest firmware. ---------Update 2---------- I've now reinstalled ubuntu (with 10.4) and I still experience the same problem.

    Read the article

  • Computer sponteously reboots when doing heavy file copy to/from disk

    - by Mark Hosang
    I've been fighting with this problem for the last 3 weeks where my machine will just instantly reboot. No BSOD, and when i checked the event log all that was reported was the generic "Kernal-power" error with the detailed information pointing to a hard crash. This is a machine that was working for 18 months before these crashes started happening. When they started happening is after I added 3 HDs in a RAID-5, upped the memory to 12gb, moved to a new house, added a SSD and added about 5 case fans. I have thus eliminated the RAID, and determined that the SSD was not the cause (because it was still crashing even though the ssd wasn't connected). I've run memtest several times over night with no memory problems showing up. I've run IntelBurnTest to max out the cpu to see if it was a heat issue and at full tilt after 20 min it was only at 85C and the machine didn't crash. I also took a look at the voltages during this test, with a screenshot at the bottom of this post I've ruled out a software issue by reinstalling windows 7 ultimate x64 a total of 5 times, but even during that the install it crashes. Happens sometime during file copying at the beginning, or during uncompressing files, or sometimes during running windows update. The only discernible pattern i can see is that it seems to crash when hard disks might be spinning up or when they are accessed heavily from large file transfers. My current guess is that it is probably an issue with the MB, PSU or the power coming through the outlet. Any suggestions of what i could try to troubleshoot or what may be wrong? Specs PSU: Seasonic M12 700w Mem: 12gb CPU: i7-920 with stock heatsink MB: Asus P6T HDs: 3 green WD and 1 Corsair force 3 120b with 1.3.3 firmware Running full tilt voltages Idling Voltages

    Read the article

  • Scaling databases with cheap SSD hard drives

    - by Dennis Kashkin
    Hey guys! I hope that many of you are working with high traffic database-driven websites, and chances are that your main scalability issues are in the database. I noticed a couple of things lately: Most large databases require a team of DBAs in order to scale. They constantly struggle with limitations of hard drives and end up with very expensive solutions (SANs or large RAIDs, frequent maintenance windows for defragging and repartitioning, etc.) The actual annual cost of maintaining such databases is in $100K-$1M range which is too steep for me :) Finally, we got several companies like Intel, Samsung, FusionIO, etc. that just started selling extremely fast yet affordable SSD hard drives based on SLC Flash technology. These drives are 100 times faster in random read/writes than the best spinning hard drives on the market (up to 50,000 random writes per second). Their seek time is pretty much zero, so the cost of random I/O is the same as sequential I/O, which is awesome for databases. These SSD drives cost around $10-$20 per gigabyte, and they are relatively small (64GB). So, there seems to be an opportunity to avoid the HUGE costs of scaling databases the traditional way by simply building a big enough RAID 5 array of SSD drives (which would cost only a few thousand dollars). Then we don't care if the database file is fragmented, and we can afford 100 times more disk writes per second without having to spread the database across 100 spindles. . Is anybody else interested in this? I've been testing a few SSD drives and can share my results. If anybody on this site has already solved their I/O bottleneck with SSDs, I would love to hear your war stories! PS. I know that there are plenty of expensive solutions out there that help with scalability, for example the time proven RAM-based SANs. I want to be clear that even $50K is too expensive for my project. I have to find a solution that costs no more than $10K and does not take much time to implement.

    Read the article

  • Web browsing through SSH tunnel gets stuck/clogged

    - by endolith
    I use tools like Tunnelier to log into my home Tomato router through SSH, and then use it as a proxy for web browsing, tunnel for Remote Desktop/VNC, etc. Most days it works great, but some days every page I try to view gets stuck, like the tunnel is clogged. I load a web page and it seems to be loading, then stops, with the little loading icon spinning and nothing happening. I refresh the page, I reboot the router, I reboot the other computers on my home network and turn off any bandwidth-hogging services on them, I've turned on QoS on the router to prioritize SSH. I don't understand what's getting stuck. Rebooting or disconnecting/reconnecting the SSH tunnel improves responsiveness for a minute, but then it gets clogged again. It also seems to help if I don't do anything on the tunnel for a few minutes, then it will be responsive for a bit and then get clogged again. Trying to open a terminal console from Tunnelier is also unresponsive, so it's not just a web browsing problem. Likewise, connecting to http://192.168.1.1 in the browser (to the router's web config through its own tunnel) is also slow/laggy/halting. The realtime bandwidth reported by the router is nowhere near my DSL connection's limits, though it does show big spikes during the laggy times, and the connection is responsive when it shows low bandwidths. How do I troubleshoot something like this?

    Read the article

  • Computer does not boot, often

    - by tam
    I've ran into a issue with my computer that it does no longer reach POST, but simply powers on for a fraction of a second and powers off. But this is not always, some times it boots just normally and it works as it should, no issues with not enough power or anything. But as soon as I turn it of, I can not turn it back on, but then again at some random point it just powers up again, and resumes normal operation. If I disconnect the 8pin ATX connector from the motherboard, it powers up, fans and disks spinning normally until I power it off again. So this problem only happens when ATX is connected, which seems odd, I normally always saw this kind of an error if ATX was not connected, but here it's the exact opposite. It also does not emit any sound on the buzzer, except the normal beep, when it powers up normally. I have already tried: Remove graphics card Remove one and/or all RAM sticks Disconnect everything non-essential, even hard drives Clear CMOS I have not yet tried to remove all components and tried to boot everything outside of the case, because I did not have the time to disassemble and bleed the water loop. However, I can confirm that nothing is stuck underneath the motherboard, not is any of those brass raisers touching the board where it should not. Specs: Gigabyte GA-970A-UD3 AMD FX6300 ATI HD7850 I think this should be enough for this issue.

    Read the article

  • Windows 7 64-bit Google Chrome Makes Desktop Unresponsive

    - by Meengla
    For the past 1-2 weeks my desktop becomes unresponsive sometimes. The problem seems to happen as I load a page in Google Chrome; it could be any page though today it happened when I tried to load a page with Flash content in it. The problem is not consistent and there is no pattern. I can do a virus scan using some software (not antivirus installed--never needed that) but I strongly suspect it is some software I installed or some Windows Update. This is a very powerful Dell Optiplex 990 with 16GB RAM, so Memory shouldn't be an issue. When the problem happens the cursor becomes spinning even over the taskbar and control alt delete takes a long time. Eventually I get a message that 'this program is not responding' with end/close and 'cancel' icon. But repeated end or cancel does nothing. Then the menu for ctrl alt del comes up. The rest of the applications keep running fine though I can't get to them because the cursor is the wait-cursor. What is happening? How can I find what exactly caused the problem? Thanks.

    Read the article

  • Figuring out which PC part is faulty

    - by Davy8
    I have an odd scenario and I'm having trouble figuring out which is the faulty component. First of all, the video doesn't work, monitor says it's not getting a signal. Monitor's not faulty (works on other computer) so the first suspect was video card. However 2 things make me think it's not the video card. (Don't have another machine with PCIe around to test definitively) First, the GPU fan is spinning so it's getting power. Second, tried putting in an older PCI video card that is known to be working (pulled out of another working machine) and there's still no video. Normally if it's not the video card I'd suspect the motherboard, but everything's getting power on the mobo, so I'm not sure. The case apparently doesn't have system speakers, so can't hear any of the diagnostic beeps either. Also not sure whether a faulty CPU would cause no image at all either. The parts are brand new so something's going to get RMA'd but I'm not sure which component is to blame in this case. (Only slightly related, but I also accidentally put too much thermal paste on the CPU. The fan/heatsink instructions said to put the whole tube which seemed like a lot compared to previous experience, and as I started squeezing I knew it was definitely too much and stopped at about 1/3 but against my better judgement I didn't wipe any off. I'm not sure whether that would cause problems other than not cooling as effectively as it should)

    Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >