Search Results

Search found 29864 results on 1195 pages for 'ubuntu 8 04'.

Page 17/1195 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

  • Wireless internet is connected to an open network but has no internet

    - by Joshua Reeder
    I just installed Ubuntu on my laptop yesterday and it connected to the wireless fine. Then I took it to school, put it on their wired connection, downloaded some stuff, and now the wireless doesn't work. At first it would detect networks, but not connect. I restarted it and now it can connect, but it acts like it doesn't have internet in the browser. Wired connection still works fine on it. I know it isn't the network because my ipad is working on the wireless connection fine. I found another solution on here switching the security settings for the wireless, but this is the apartment's wireless so they have it open, and I won't be able to mess with it at all. Here is lspci output: 00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11) 00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11) 00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11) 00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11) 00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11) 00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11) 00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11) 00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 310M] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 07:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10) 16:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 20) 16:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 20) 16:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 20) 16:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 20) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04) ff:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04) ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04) ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04) ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04) ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04) ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04) ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04) ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04) ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04) ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04) ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04) Update: I re-installed Ubuntu 12.04 (I assumed I messed something up while toying with it) but it did not solve the problem. Eventually, I got it to work with my school's wireless internet (the default network settings were wrong), but the internet still doesn't work on my apartment's wifi (it has no security on it).

    Read the article

  • Wine 1.4. Cannot install vcrun6 on Ubuntu Studio 12.04.1 64 bit

    - by ABOBA
    Cannot install vcrun6. I tried to do it with winetricks and manually (download vcredist.exe and install), but nothing. Launching in terminal gives the following _user@_user-machine:~$ WINEPREFIX="/home/_user/.wine" wine "C:/vcredist.exe" fixme:setupapi:SetupDefaultQueueCallbackW notification 262144 params 32f63c,0 err:setupapi:SetupDefaultQueueCallbackW copy error 0 L"C:\\users\\_user\\Temp\\IXP000.TMP\\comcat.dll" -> L"C:\\windows\\system32\\comcat.dll" fixme:setupapi:SetupDefaultQueueCallbackW notification 262144 params 32f63c,0 err:setupapi:SetupDefaultQueueCallbackW copy error 0 L"C:\\users\\_user\\Temp\\IXP000.TMP\\msvcrt.dll" -> L"C:\\windows\\system32\\msvcrt.dll" fixme:setupapi:SetupDefaultQueueCallbackW notification 262144 params 32f63c,0 err:setupapi:SetupDefaultQueueCallbackW copy error 0 L"C:\\users\\_user\\Temp\\IXP000.TMP\\oleaut32.dll" -> L"C:\\windows\\system32\\oleaut32.dll" fixme:setupapi:SetupDefaultQueueCallbackW notification 262144 params 32f63c,0 err:setupapi:SetupDefaultQueueCallbackW copy error 0 L"C:\\users\\_user\\Temp\\IXP000.TMP\\olepro32.dll" -> L"C:\\windows\\system32\\olepro32.dll" fixme:setupapi:SetupDefaultQueueCallbackW notification 262144 params 32f63c,0 err:setupapi:SetupDefaultQueueCallbackW copy error 0 L"C:\\users\\_user\\Temp\\IXP000.TMP\\stdole2.tlb" -> L"C:\\windows\\system32\\stdole2.tlb" The distribution is Ubuntu Studio 12.04.1 64bit Thanks in advance

    Read the article

  • Installing Ruby 1.9.1 on Ubuntu?

    - by Björn
    I wonder about installing the latest version of Ruby on Ubuntu 9.04. Now I can run through the ./configure and make stuff fine, but what I wonder about: how to avoid conflicts with the packaging system? For example if some other package I install depends on Ruby, wouldn't the package manager install the (outdated) Ruby package and in the worst case overwrite my files? So I think I need some way to tell Ubuntu that Ruby is in fact already installed?

    Read the article

  • How to install VMware tools for Ubuntu 11.04 hosted on VMware ESXi?

    - by Dmitri Toubelis
    I'm running Vmware ESX 4.1 and I have a development VM that I recently upgraded from Ubuntu 10.04 to 11.04. Then I tried to re-install VMware Tools and some of the modules gave me an error and would not compile. As a result I'm having problems with backing up this virtual machine now and I suspect VMware tools is the reason. I installed latest patches for VMware host, that included an update to VMware Tools (v8.3.7 build-381511) but I'm still getting the same error. The error I'm getting is like this: ... /tmp/vmware-root/modules/vmhgfs-only/super.c:73:4: error: unknown field \u2018clear_inode\u2019 specified in initializer make[2]: *** [/tmp/vmware-root/modules/vmhgfs-only/super.o] Error 1 make[1]: *** [_module_/tmp/vmware-root/modules/vmhgfs-only] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-generic' make: *** [vmhgfs.ko] Error 2 make: Leaving directory `/tmp/vmware-root/modules/vmhgfs-only' and also this: /tmp/vmware-root/modules/vmci-only/vmci_drv.c:91:4: error: unknown field \u2018ioctl\u2019 specified in initializer /tmp/vmware-root/modules/vmci-only/vmci_drv.c:91:4: warning: initialization from incompatible pointer type /tmp/vmware-root/modules/vmci-only/vmci_drv.c: In function \u2018vmci_init\u2019: /tmp/vmware-root/modules/vmci-only/vmci_drv.c:151:4: error: implicit declaration of function \u2018init_MUTEX\u2019 make[2]: *** [/tmp/vmware-root/modules/vmci-only/vmci_drv.o] Error 1 make[1]: *** [_module_/tmp/vmware-root/modules/vmci-only] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-generic' make: *** [vmci.ko] Error 2 make: Leaving directory `/tmp/vmware-root/modules/vmci-only' Any ideas?

    Read the article

  • Ubuntu, No wireless networks found after correctly installed madwifi

    - by Peter
    Hi, I just installed madwifi on my MSI laptop with an Atheros AR5001 wifi card & Lucid. As far as I can see and according to System - Administration - Hardware drivers the install was successful and the card + driver is up and running. However, I don't see any wireless network (my windows PC can see about 5 wireless networks). I tried it with the network manager applet as well as with wicd. If I try to connect to "Hidden Wireless Network" via nm-applet, it will start to connect for a while but is unable too (although I supply it with the correct WEP settings & key) So, I'm unable to use my wireless network. What am i doing wrong? Some information about my system: iwconfig lo no wireless extensions. eth0 no wireless extensions. wifi0 no wireless extensions. ath0 IEEE 802.11g ESSID:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:17 dBm Sensitivity=1/1 Retry:off RTS thr:off Fragment thr:off Power Management:off Link Quality=0/70 Signal level=-96 dBm Noise level=-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 pan0 no wireless extensions. ifconfig ath0 Link encap:Ethernet HWaddr 00:15:af:cf:e2:ca inet6 addr: fe80::215:afff:fecf:e2ca/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr 00:21:85:4d:82:78 inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::221:85ff:fe4d:8278/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3800 errors:0 dropped:0 overruns:0 frame:0 TX packets:2944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3940261 (3.9 MB) TX bytes:525218 (525.2 KB) Interrupt:27 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:720 (720.0 B) TX bytes:720 (720.0 B) wifi0 Link encap:UNSPEC HWaddr 00-15-AF-CF-E2-CA-00-00-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3497 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:280 RX bytes:0 (0.0 B) TX bytes:179947 (179.9 KB) Interrupt:16 lshw -C network *-network description: Wireless interface product: AR5001 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wifi0 version: 01 serial: 00:15:af:cf:e2:ca width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath_pci latency=0 multicast=yes wireless=IEEE 802.11g resources: irq:16 memory:fd7f0000-fd7fffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 01 serial: 00:21:85:4d:82:78 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.2.101 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:27 ioport:c800(size=256) memory:fe2ff000-fe2fffff memory:fe2c0000-fe2dffff(prefetchable) lspci 00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge 00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) 00:04.0 PCI bridge: ATI Technologies Inc Device 7914 00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) 00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14) 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] 01:05.2 Audio device: ATI Technologies Inc Radeon X1200 Series Audio Controller 02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 06:04.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21) 06:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 06:04.3 Bridge: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 06:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) less /proc/modules | grep ath ath_rate_sample 11476 1 - Live 0xf812b000 ath_pci 193197 0 - Live 0xf85c3000 wlan 222892 5 wlan_wep,wlan_scan_sta,ath_rate_sample,ath_pci, Live 0xf8537000 ath_hal 398604 3 ath_rate_sample,ath_pci, Live 0xf8480000 I've been at this for hours now, also tried ndiswrapper and ath5k drivers with no luck, and really could use some help. Cheers.

    Read the article

  • How Do I Install Latest Java Plugin on Ubuntu 8.04 LTS with Custom Firefox 3.6.3?

    - by Volomike
    I have Ubuntu 8.04 LTS and will need to remain on that for awhile as I am a programmer and cannot disturb what I'm doing in the middle of a project. As you know, it doesn't want to install the latest Firefox by default and keeps me in the stone age. So, I had to install my own Firefox. I did so and with relative ease I was able to install the Flash plugin using the normal 'ln -s' technique one usually does with /usr/lib/firefox/plugins. Now I need to do a Gotomypc.com task and it requires Java -- moan -- so I need to figure out how to install Java. I downloaded and installed the latest Java plugin in /usr/java, and I do see underneath that layer of folders a plugins folder with a .so file. So, I went to /usr/lib/firefox/plugins and did this: ln -s /usr/java/jre1.6.0_20/plugin/i386/ns7/libjavaplugin_oji.so Then, I also read on the web that one has to create a ~/.mozilla/plugins folder, cd into it, and then run the same ln -s command again. Another site recommended finding one's ~/.mozilla/firefox and renaming it to ~/.mozilla/firefox.old (after you backed up your bookmarks) and then launching firefox again so that it creates ~/.mozilla/firefox and uses the new Java plugin. Well, all these attempts have completely failed and it is incredibly frustrating. I do about:plugins to see my plugins and all I get are the Flash and the default null plugin. I do not see the Java one. Also, they said on my tools menu with Firefox 3.6.3 I would see a Java Console menu and I don't see that either. I found a pluginreg.dat somewhere deep under ~/.mozilla/firefox, but it does not list the Java plugin inside -- only Flash and the null plugin. Please help me install Java. I need to help a client out and need to connect to his PC remotely with gotomypc, which requires Java inside firefox.

    Read the article

  • Can't Install php5-dev on Ubuntu 12.04 running OpenVZ

    - by MEsch
    I'm trying to fetch the php apc package using pecl and running into a problem that I believe may be caused by OpenVZ. To do so I need php5-dev. When I try to install it via apt-get, I get this: php5-dev : Depends: libssl-dev but it is not going to be installed Depends: libtool (>= 2.2) but it is not going to be installed As I try to manually install dependencies (without success), I believe I've identified libc6-dev as the culprit. libc6-dev : Depends: libc6 (= 2.15-0ubuntu10.2) but 2.15-0ubuntu10+openvz0 is to be installed I have libc6 installed on the system. If it's any help here is my sources.list: deb http://archive.ubuntu.com/ubuntu precise main restricted universe deb http://archive.ubuntu.com/ubuntu precise-updates main restricted universe deb http://security.ubuntu.com/ubuntu precise-security main restricted universe multiverse deb http://archive.canonical.com/ubuntu precise partner This is a very frustrating problem, as I have other instances of Ubuntu 12.04 running just fine elsewhere (though not on OpenVZ).

    Read the article

  • How do I find the cause for a huge difference in performance between two identical Ubuntu servers?

    - by the.duckman
    I am running two Dell R410 servers in the same rack of a data center. Both have the same hardware configuration, run Ubuntu 10.4, have the same packages installed and run the same Java web servers. No other load. One of them is 20-30% faster than the other, very consistently. I used dstat to figure out, if there are more context switches, IO, swapping or anything, but I see no reason for the difference. With the same workload, (no swapping, virtually no IO), the cpu usage and load is higher on one server. So the difference appears to be mainly CPU bound, but while a simple cpu benchmark using sysbench (with all other load turned off) did yield a difference, it was only 6%. So maybe it is not only CPU but also memory performance. I tried to figure out if the BIOS settings differ in some parameter, did a dump using dmidecode, but that yielded no difference. I compared /proc/cpuinfo, no difference. I compared the output of cpufreq-info, no difference. I am lost. What can I do, to figure out, what is going on?

    Read the article

  • Installing Ubuntu One on Ubuntu 11.10 server

    - by Yaron
    I have installed "Ubuntu One" on an Ubuntu server 11.10 based on these instructions: How do I configure Ubuntu one on a 11.10 server? Everything went smooth during installation. However when I try the command: u1sdtool --start to get the server up, I get the following stack error: u1sdtool --start /usr/lib/python2.7/dist-packages/gtk-2.0/gtk/init.py:57: GtkWarning: could not open display warnings.warn(str(e), _gtk.Warning) Unhandled Error Traceback (most recent call last): dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11 Does anyone have a clue how to solve this issue?

    Read the article

  • Clone a Hard Drive Using an Ubuntu Live CD

    - by Trevor Bekolay
    Whether you’re setting up multiple computers or doing a full backup, cloning hard drives is a common maintenance task. Don’t bother burning a new boot CD or paying for new software – you can do it easily with your Ubuntu Live CD. Not only can you do this with your Ubuntu Live CD, you can do it right out of the box – no additional software needed! The program we’ll use is called dd, and it’s included with pretty much all Linux distributions. dd is a utility used to do low-level copying – rather than working with files, it works directly on the raw data on a storage device. Note: dd gets a bad rap, because like many other Linux utilities, if misused it can be very destructive. If you’re not sure what you’re doing, you can easily wipe out an entire hard drive, in an unrecoverable way. Of course, the flip side of that is that dd is extremely powerful, and can do very complex tasks with little user effort. If you’re careful, and follow these instructions closely, you can clone your hard drive with one command. We’re going to take a small hard drive that we’ve been using and copy it to a new hard drive, which hasn’t been formatted yet. To make sure that we’re working with the right drives, we’ll open up a terminal (Applications > Accessories > Terminal) and enter in the following command sudo fdisk –l We have two small drives, /dev/sda, which has two partitions, and /dev/sdc, which is completely unformatted. We want to copy the data from /dev/sda to /dev/sdc. Note: while you can copy a smaller drive to a larger one, you can’t copy a larger drive to a smaller one with the method described below. Now the fun part: using dd. The invocation we’ll use is: sudo dd if=/dev/sda of=/dev/sdc In this case, we’re telling dd that the input file (“if”) is /dev/sda, and the output file (“of”) is /dev/sdc. If your drives are quite large, this can take some time, but in our case it took just less than a minute. If we do sudo fdisk –l again, we can see that, despite not formatting /dev/sdc at all, it now has the same partitions as /dev/sda.  Additionally, if we mount all of the partitions, we can see that all of the data on /dev/sdc is now the same as on /dev/sda. Note: you may have to restart your computer to be able to mount the newly cloned drive. And that’s it…If you exercise caution and make sure that you’re using the right drives as the input file and output file, dd isn’t anything to be scared of. Unlike other utilities, dd copies absolutely everything from one drive to another – that means that you can even recover files deleted from the original drive in the clone! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDHow to Browse Without a Trace with an Ubuntu Live CDRecover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDCreate a Bootable Ubuntu 9.10 USB Flash DriveWipe, Delete, and Securely Destroy Your Hard Drive’s Data the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7

    Read the article

  • Can't boot Ubuntu 12.10 32 or 64 Bit, only Ubuntu 12.04 32 Bit [closed]

    - by Alexander
    Possible Duplicate: My computer boots to a black screen, what options do I have to fix it? i tried to install Ubuntu 12.04 64Bit, 12.10 32 and 64Bit, but it doesn't work. I'm used the Ubuntu 12.04 32Bit Start Disc Creator and also Unetboot on Win7, the installation-process are finished and i restart without the Stick. I can choose for example 12.10 and it starts writing "start ... [OK], ...", but then it hangs most on "Stop Kernel Messages [OK]". Then i can only shutdown normal the system and it writes stopping, shutdown and something like that. I am use an Aspire One D270 Netbook with Intel Atom N2600. It also doesn't work to try Ubuntu 12.10 from running on USB Stick. It starts, but then its black and the cursor blink on the left upside. Please can you help me? :(

    Read the article

  • Recover Data Like a Forensics Expert Using an Ubuntu Live CD

    - by Trevor Bekolay
    There are lots of utilities to recover deleted files, but what if you can’t boot up your computer, or the whole drive has been formatted? We’ll show you some tools that will dig deep and recover the most elusive deleted files, or even whole hard drive partitions. We’ve shown you simple ways to recover accidentally deleted files, even a simple method that can be done from an Ubuntu Live CD, but for hard disks that have been heavily corrupted, those methods aren’t going to cut it. In this article, we’ll examine four tools that can recover data from the most messed up hard drives, regardless of whether they were formatted for a Windows, Linux, or Mac computer, or even if the partition table is wiped out entirely. Note: These tools cannot recover data that has been overwritten on a hard disk. Whether a deleted file has been overwritten depends on many factors – the quicker you realize that you want to recover a file, the more likely you will be able to do so. Our setup To show these tools, we’ve set up a small 1 GB hard drive, with half of the space partitioned as ext2, a file system used in Linux, and half the space partitioned as FAT32, a file system used in older Windows systems. We stored ten random pictures on each hard drive. We then wiped the partition table from the hard drive by deleting the partitions in GParted. Is our data lost forever? Installing the tools All of the tools we’re going to use are in Ubuntu’s universe repository. To enable the repository, open Synaptic Package Manager by clicking on System in the top-left, then Administration > Synaptic Package Manager. Click on Settings > Repositories and add a check in the box labelled “Community-maintained Open Source software (universe)”. Click Close, and then in the main Synaptic Package Manager window, click the Reload button. Once the package list has reloaded, and the search index rebuilt, search for and mark for installation one or all of the following packages: testdisk, foremost, and scalpel. Testdisk includes TestDisk, which can recover lost partitions and repair boot sectors, and PhotoRec, which can recover many different types of files from tons of different file systems. Foremost, originally developed by the US Air Force Office of Special Investigations, recovers files based on their headers and other internal structures. Foremost operates on hard drives or drive image files generated by various tools. Finally, scalpel performs the same functions as foremost, but is focused on enhanced performance and lower memory usage. Scalpel may run better if you have an older machine with less RAM. Recover hard drive partitions If you can’t mount your hard drive, then its partition table might be corrupted. Before you start trying to recover your important files, it may be possible to recover one or more partitions on your drive, recovering all of your files with one step. Testdisk is the tool for the job. Start it by opening a terminal (Applications > Accessories > Terminal) and typing in: sudo testdisk If you’d like, you can create a log file, though it won’t affect how much data you recover. Once you make your choice, you’re greeted with a list of the storage media on your machine. You should be able to identify the hard drive you want to recover partitions from by its size and label. TestDisk asks you select the type of partition table to search for. In most cases (ext2/3, NTFS, FAT32, etc.) you should select Intel and press Enter. Highlight Analyse and press enter. In our case, our small hard drive has previously been formatted as NTFS. Amazingly, TestDisk finds this partition, though it is unable to recover it. It also finds the two partitions we just deleted. We are able to change their attributes, or add more partitions, but we’ll just recover them by pressing Enter. If TestDisk hasn’t found all of your partitions, you can try doing a deeper search by selecting that option with the left and right arrow keys. We only had these two partitions, so we’ll recover them by selecting Write and pressing Enter. Testdisk informs us that we will have to reboot. Note: If your Ubuntu Live CD is not persistent, then when you reboot you will have to reinstall any tools that you installed earlier. After restarting, both of our partitions are back to their original states, pictures and all. Recover files of certain types For the following examples, we deleted the 10 pictures from both partitions and then reformatted them. PhotoRec Of the three tools we’ll show, PhotoRec is the most user-friendly, despite being a console-based utility. To start recovering files, open a terminal (Applications > Accessories > Terminal) and type in: sudo photorec To begin, you are asked to select a storage device to search. You should be able to identify the right device by its size and label. Select the right device, and then hit Enter. PhotoRec asks you select the type of partition to search. In most cases (ext2/3, NTFS, FAT, etc.) you should select Intel and press Enter. You are given a list of the partitions on your selected hard drive. If you want to recover all of the files on a partition, then select Search and hit enter. However, this process can be very slow, and in our case we only want to search for pictures files, so instead we use the right arrow key to select File Opt and press Enter. PhotoRec can recover many different types of files, and deselecting each one would take a long time. Instead, we press “s” to clear all of the selections, and then find the appropriate file types – jpg, gif, and png – and select them by pressing the right arrow key. Once we’ve selected these three, we press “b” to save these selections. Press enter to return to the list of hard drive partitions. We want to search both of our partitions, so we highlight “No partition” and “Search” and then press Enter. PhotoRec prompts for a location to store the recovered files. If you have a different healthy hard drive, then we recommend storing the recovered files there. Since we’re not recovering very much, we’ll store it on the Ubuntu Live CD’s desktop. Note: Do not recover files to the hard drive you’re recovering from. PhotoRec is able to recover the 20 pictures from the partitions on our hard drive! A quick look in the recup_dir.1 directory that it creates confirms that PhotoRec has recovered all of our pictures, save for the file names. Foremost Foremost is a command-line program with no interactive interface like PhotoRec, but offers a number of command-line options to get as much data out of your had drive as possible. For a full list of options that can be tweaked via the command line, open up a terminal (Applications > Accessories > Terminal) and type in: foremost –h In our case, the command line options that we are going to use are: -t, a comma-separated list of types of files to search for. In our case, this is “jpeg,png,gif”. -v, enabling verbose-mode, giving us more information about what foremost is doing. -o, the output folder to store recovered files in. In our case, we created a directory called “foremost” on the desktop. -i, the input that will be searched for files. This can be a disk image in several different formats; however, we will use a hard disk, /dev/sda. Our foremost invocation is: sudo foremost –t jpeg,png,gif –o foremost –v –i /dev/sda Your invocation will differ depending on what you’re searching for and where you’re searching for it. Foremost is able to recover 17 of the 20 files stored on the hard drive. Looking at the files, we can confirm that these files were recovered relatively well, though we can see some errors in the thumbnail for 00622449.jpg. Part of this may be due to the ext2 filesystem. Foremost recommends using the –d command-line option for Linux file systems like ext2. We’ll run foremost again, adding the –d command-line option to our foremost invocation: sudo foremost –t jpeg,png,gif –d –o foremost –v –i /dev/sda This time, foremost is able to recover all 20 images! A final look at the pictures reveals that the pictures were recovered with no problems. Scalpel Scalpel is another powerful program that, like Foremost, is heavily configurable. Unlike Foremost, Scalpel requires you to edit a configuration file before attempting any data recovery. Any text editor will do, but we’ll use gedit to change the configuration file. In a terminal window (Applications > Accessories > Terminal), type in: sudo gedit /etc/scalpel/scalpel.conf scalpel.conf contains information about a number of different file types. Scroll through this file and uncomment lines that start with a file type that you want to recover (i.e. remove the “#” character at the start of those lines). Save the file and close it. Return to the terminal window. Scalpel also has a ton of command-line options that can help you search quickly and effectively; however, we’ll just define the input device (/dev/sda) and the output folder (a folder called “scalpel” that we created on the desktop). Our invocation is: sudo scalpel /dev/sda –o scalpel Scalpel is able to recover 18 of our 20 files. A quick look at the files scalpel recovered reveals that most of our files were recovered successfully, though there were some problems (e.g. 00000012.jpg). Conclusion In our quick toy example, TestDisk was able to recover two deleted partitions, and PhotoRec and Foremost were able to recover all 20 deleted images. Scalpel recovered most of the files, but it’s very likely that playing with the command-line options for scalpel would have enabled us to recover all 20 images. These tools are lifesavers when something goes wrong with your hard drive. If your data is on the hard drive somewhere, then one of these tools will track it down! Similar Articles Productive Geek Tips Recover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDUse an Ubuntu Live CD to Securely Wipe Your PC’s Hard DriveReset Your Ubuntu Password Easily from the Live CDBackup Your Windows Live Writer SettingsAdding extra Repositories on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle !

    Read the article

  • Advantages of Ubuntu LTS versions over regular Ubuntu?

    - by Adam Matan
    Do the LTS versions of Ubuntu have any advantages for the non-paying customers (who don't get any support?) From the tech spec only, these versions seem outdated in many aspects - mainly drivers and installed software versions. For instance, My previous (bounty!) problem regarding the AGN 5100 drivers would have been solved under Ubuntu 9.04.

    Read the article

  • Free Hosting control panel

    - by John Maxim
    I'm in the mid of researching for one of the best hosting control panels. The server I run is Ubuntu and I have some experience with ISPConfig 2 & 3. Since I haven't explored any others available, what are the recommended ones for an Ubuntu server? I asked because I find that there seems to be some disabling and modifications required for an Ubuntu server if I need to use ispconfig which causes the server to change its actual way of running. It's quite good though, but any more recommended ones ? Something more organic? which doesn't require much breaking and changing. I'm not asking for the simple one, I don't mind going extra mile to install a powerful one but just try sticking with most Ubuntu's conventions will be an ideal one for me. And of course, if there happens to be something that meets the requirement as mentioned "Ubuntu conventions" and also simple to install at the same time, that'd be a bonus. Thanks in advance.

    Read the article

  • Use Ubuntu’s Public Folder to Easily Share Files Between Computers

    - by Chris Hoffman
    You’ve probably noticed that Ubuntu comes with a Public folder in your home directory. This folder isn’t shared by default, but you can easily set up several different types of file-sharing to easily share files on your local network. This folder was originally meant for the Personal File Sharing tool, which is no longer included with Ubuntu by default. You can install the Personal File Sharing tool or use Ubuntu’s built-in file-sharing feature to share files. HTG Explains: What Is RSS and How Can I Benefit From Using It? HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It HTG Explains: Learn How Websites Are Tracking You Online

    Read the article

  • How to Turn Your Ubuntu Laptop into a Wireless Access Point

    - by Chris Hoffman
    If you have a single wired Internet connection – say, in a hotel room – you can create an ad-hoc wireless network with Ubuntu and share the Internet connection among multiple devices. Ubuntu includes an easy, graphical setup tool. Unfortunately, there are some limitations. Some devices may not support ad-hoc wireless networks and Ubuntu can only create wireless hotspots with weak WEP encryption, not strong WPA encryption. HTG Explains: What Is RSS and How Can I Benefit From Using It? HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It HTG Explains: Learn How Websites Are Tracking You Online

    Read the article

  • How to Create a Custom Ubuntu Live CD or USB the Easy Way

    - by Chris Hoffman
    There are several different ways to create custom Ubuntu live CDs. We’ve covered using the Reconstructor web app in the past, but some commenters recommended the Ubuntu Customization Kit instead. It’s an open-source utility found in Ubuntu’s software repositories. UCK offers more powerful features than Reconstructor does, but Reconstructor makes most tasks easier for novice users. Be sure to take a look at Reconstructor, too. How To Be Your Own Personal Clone Army (With a Little Photoshop) How To Properly Scan a Photograph (And Get An Even Better Image) The HTG Guide to Hiding Your Data in a TrueCrypt Hidden Volume

    Read the article

  • How to Create a Separate Home Partition After Installing Ubuntu

    - by Chris Hoffman
    Ubuntu doesn’t use a separate /home partition by default, although many Linux users prefer one. Using a separate home partition allows you to reinstall Ubuntu without losing your personal files and settings. While a separate home partition is normally chosen during installation, you can also migrate to a separate home partition after installing Ubuntu – this takes a bit of work, though. HTG Explains: What Is Windows RT and What Does It Mean To Me? HTG Explains: How Windows 8′s Secure Boot Feature Works & What It Means for Linux Hack Your Kindle for Easy Font Customization

    Read the article

  • How to Encrypt Your Home Folder After Installing Ubuntu

    - by Chris Hoffman
    Ubuntu offers to encrypt your home folder during installation. If you decline the encryption and change your mind later, you don’t have to reinstall Ubuntu. You can activate the encryption with a few terminal commands. Ubuntu uses eCryptfs for encryption. When you log in, your home directory is automatically decrypted with your password. While there is a performance penalty to encryption, it can keep private data confidential, particularly on laptops that may be stolen. HTG Explains: What Is RSS and How Can I Benefit From Using It? HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It HTG Explains: Learn How Websites Are Tracking You Online

    Read the article

  • Has anyone got Ubuntu Touch working on Nexus 5?

    - by user1628
    I have been debating whether to get a nexus 5 phone since it came out. My only fear is that I won't like android. I love ubuntu, I know that I'd love ubuntu. So I have a few question related to Ubuntu Touch: Is it easy or possible to switch between Ubuntu Touch and Android? Would I have to keep hacking the phone? Can I dual boot them? Would I lose my data every time I switch? The nexus 5 isn't mentioned here: https://wiki.ubuntu.com/Touch/Devices Does that mean it simply won't work if I follow the porting instructions? Would I have to do a bit of hacking? Has anyone got it working? Will it eventually be supported?

    Read the article

  • Can Ubuntu-One be installed on Ubuntu 10.04?

    - by crivello
    I have installed ubuntu-one by the several ways on a 10.04-TLS, it appears on my System Preference Ubuntu One. however, Clicking one it , nothing happens. On a terminal, the command : ~$ ubuntuone-launch doe not working too, and the following command ~$ ubuntuone-preferences leads to an error message, given below, that made me crazy. Does somebody has an idea one a solution to solve that ? Many thanks. \jcc Traceback (most recent call last): File "/usr/bin/ubuntuone-preferences", line 63, in <module> from desktopcouch.replication_services import ubuntuone as dcouch File "/usr/lib/python2.6/dist-packages/desktopcouch/__init__.py", line 20, in <module> from desktopcouch.start_local_couchdb import process_is_couchdb, read_pidfile File "/usr/lib/python2.6/dist-packages/desktopcouch/start_local_couchdb.py", line 38, in <module> from desktopcouch import local_files File "/usr/lib/python2.6/dist-packages/desktopcouch/local_files.py", line 300, in <module> xdg_base_dirs.save_config_path("desktop-couch")) File "/usr/lib/python2.6/dist-packages/desktopcouch/local_files.py", line 235, in __init__ self.couch_exec_command = [COUCH_EXE, self.couch_chain_ini_files(), File "/usr/lib/python2.6/dist-packages/desktopcouch/local_files.py", line 274, in couch_chain_ini_files stdout=subprocess.PIPE) File "/usr/lib/python2.6/subprocess.py", line 633, in __init__errread, errwrite) File "/usr/lib/python2.6/subprocess.py", line 1139, in _execute_child raise child_exception OSError: [Errno 13] Permission denied

    Read the article

  • Why can't I get Apache2 mod_dumpio working under Lucid Lynx Ubuntu?

    - by bland328
    I'm trying to capture all of the traffic to and from an Apache2 web server for troubleshooting purposes, so I did the following to try to set mod_dumpio up properly: Used a2enmod to enable mod_dumpio Changed LogLevel to "debug" in apache2.config Added "DumpIOInput On", "DumpIOOutput On" and "DumpIOLogLevel debug" to apache2.config Issued "/etc/init.d/apache2 restart" to restart Apache Issued "apache2ctl -t -D DUMP_MODULES" to make sure mod_dumpio was loaded I'm watching /var/log/apache2/error.log, but not seeing much there, and certainly not a dump of all input and output. Can anyone help?

    Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >