Search Results

Search found 5422 results on 217 pages for 'coding convention'.

Page 170/217 | < Previous Page | 166 167 168 169 170 171 172 173 174 175 176 177  | Next Page >

• Write once, read many (WORM) using Linux file system

  - by phil_ayres

  I have a requirement to write files to a Linux file system that can not be subsequently overwritten, appended to, updated in any way, or deleted. Not by a sudo-er, root, or anybody. I am attempting to meet the requirements of the financial services regulations for recordkeeping, FINRA 17A-4, which basically requires that electronic documents are written to WORM (write once, read many) devices. I would very much like to avoid having to use DVDs or expensive EMC Centera devices. Is there a Linux file system, or can SELinux support the requirement for files to be made complete immutable immediately (or at least soon) after write? Or is anybody aware of a way I could enforce this on an existing file system using Linux permissions, etc? I understand that I can set readonly permissions, and the immutable attribute. But of course I expect that a root user would be able to unset those. I considered storing data to small volumes that are unmounted and then remounted read-only, but then I think that root could still unmount and remount as writable again. I'm looking for any smart ideas, and worst case scenario I'm willing to do a little coding to 'enhance' an existing file system to provide this. Assuming there is a file system that is a good starting point. And put in place a carefully configured Linux server to act as this type of network storage device, doing nothing else. After all of that, encryption on the files would be useful too!

  Read the article

• I need to take the first three letters of a filename and set it into a text file, in a certain fashion. How can I do this?

  - by JuniorD

  Okay, so I need to take the first three letters of a file from a list of files, and place this into a text file in a certain manner. I will provide examples below. Lets say that I have two file names in the same directory, one called cougar.txt and the other bear.txt. These are in the animals directory. I need to take the first three letters of these words, and transpose them into a text file along with the directory, in the following format: BEA = "animals/bear.txt" COU = "animals/cougar.txt" This should happen with any random thing that might be in the list. I'm fairly new to this sort of coding, so I'm not quite sure which language to use, and I'm learning as I go. This new challenge seems fairly daunting to me, and I would be much appreciated if you guys could help. Also, I'm using Windows 7. Been attempting at this all day, to no avail. Preferably done in batch, but if that is impossible I'm open to recommendations.

  Read the article

• Push, parse & import "selected" data, text, info blobs from Webpages/ Emails as Event/ Appointment to standard Calendar directly or as .ics file?

  - by Alex S

  Any tool, plugin, extension, script/ code to push "selected" data, text, information blobs from Web pages, Emails etc, then parsed and imported to structured Event, Appointment (e.g. .ics) on a standard Calendar like Outlook, Google, iCal? If not, what and how could I use some scripting, coding or existing tools, extensions to add on top and do this. I come across a lot of unstructured information on Webpages, Emails, FB events etc. where I just want to add that information to my Calendar. Instead of entering all the information by hand all the time, there should be an easy enough way to have the information get parsed, organized and imported to a Calendar... Either directly to a calendar from source or Translated to a standard format such as .ICS that can be imported & saved easily. Would love to see some suggestions for this incorporating one or more of the following: on Windows with Chrome & Outlook on iPhone/ iPad to its Calendar PS: I'll come back and see if I can add more information to this question and to answer it as well. I have not found a solution yet.

  Read the article

• Can my employer force me to backup my personal machine? [closed]

  - by Eric B

  Here's the background: Approximately 1.25 years ago, the company I work for was acquired by a larger 400 person company. Before acquisition (and today still) we are all remote employees using our own personal hardware for work-related duties (coding, email, etc). We are approximately 15 employees within the larger organization. Some time after acquisition, the now owning company was slapped with a civil lawsuit. Part of this lawsuit (discovery) is requiring them to retrieve & store from us any related information. Because we were a separate company up until acquisition, there is a high probability that our personal machines might contain information about what the lawsuit alleges (email, documents, chat logs?, etc). Obviously, this depends largely on the person's job function (engineer vs. customer support vs. CEO). All employees are being required to comply. Since acquisition (1.25 yrs), the new company has not provided us with company laptops/desktops. We continue to use personal hardware, licenses, etc for work. Email is via POP3s and not hanging around on the mail server - it's on everyone's client. Documents are spread across personal machines. So, now they want us each to backup our complete personal machines. They are allowing us to create a "personal" folder where we can place personal documents. That single folder will be excluded from backup. Of course, that means total re-arrangement of documents, etc. For most of us, 99% of the data on the machine is NOT related to work. So, what's the consensus? Should we comply? What is their recourse if we do not?

  Read the article

• Transferring files from ftp to local system

  - by user1056221

  I want to copy a file from FTP and paste it to my local system. I want to run this through a batch file. I am trying this for a week. But I couldn't find the solution. Anyone help me please.... This is my actual work Want to copy a file named "Friday.bat" from ftp://172.16.3.132 (with username and password) So I use the below coding: @echo off @ftp -i -s:"%~f0"&GOTO:EOF open 172.16.3.132 mmftp ((((pasword entered here))))) binary get Friday.bat pause Result: ftp> @echo off ftp> @ftp -i -s:"%~f0"&GOTO:EOF Invalid command. ftp> open 172.16.3.132 Connected to 172.16.3.132. 220 Welcome to ABL FTP service. User (172.16.3.132:(none)): 331 Please specify the password. 230 Login successful. ftp> binary 200 Switching to Binary mode. ftp> get Friday.bat 200 PORT command successful. Consider using PASV. 550 Failed to open file. ftp> pause Finally, a file named Friday.bat is copied to my local system with 0 bytes, but it will not open.

  Read the article

• Can I host multiple sites with one Amazon EC2 instance [duplicate]

  - by user22

  This question already has an answer here: Can you help me with my capacity planning? 2 answers I currently have VPS server and I pay around $75 per month and I get: 40GB HD 2Gb RAM 100GB BW 6 core cpu (but i dont use much) I have only one live website running and traffic is only max 100 user visit per day. I mostly do the my testing stuff and some of my inter sites for playing with coding. But I do need one server. I am thinking of moving to Amazon EC2 if the price diff is not so much because then I can learn some more stuff. I am thinking of getting the 3 years Heavy utilization Reserved instance because my server will be running all day and night. I tried their online caluclator with Medium Instance Heavy reserved for 3 years for EC2 it comes $31 per month(effective price) and for EBS and S3 , I think even if thats it $40 for all other stuff. I will be at no loss for what I am getting at present. Am i correct or I missed something?? Now In my current VPS I have Apache for PHP sites and MOD wsgi for python sites. I am not sure if I will be able to do all that stuff in Amazon EC2. Can I host python and PHP sites both in Amazon EC2 instance using Named Virtual Hosts and Ngnix

  Read the article

• cannot connect to my nginx server from remote machine

  - by margincall

  I thought that it's iptables problem.. but it seems not. I really have no idea about this situation. I'm getting a server hosting(CentOS). I installed Nginx + Django and nginx uses 8080 port. A domain is connected to the server. When I executed "wget [domain]:8080/[app name]/" in the server, it worked. Of course, "wget 127.0.0.1:8080/[app name]/" has no problem. (wget [server ip]:8080/[app name]/, either) However, from other computers, connecting was failed. (message says, no route) I checked my firewall setting. I excuted these commands. iptables -I INPUT -p tcp --dport 8080 -j ACCEPT iptables -I OUTPUT -p tcp --sport 8080 -j ACCEPT iptables -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT /etc/init.d/iptables restart I don't really understand all options of commands and I think there were useless commands, but I just tried all googled iptables settings. But still I cannot connect to my server. What should I check, first? I don't know this is important, but add to this post. On 80 port, an apache server is running. It works fine, I can connect to apache from other computers. There is DB connecting issue, (PHP to MySQL) but I think that it is just PHP coding bug. please excuse my low-level English. I'm not native English speaker.. but I tried to explane well as far as possible. Thank you for reading this question.

  Read the article

• PHP SimpleXML recursive function to list children and attibutes

  - by Phill Pafford

  I need some help on the SimpleXML calls for a recursive function that lists the elements name and attributes. Making a XML config file system but each script will have it's own config file as well as a new naming convention. So what I need is an easy way to map out all the elements that have attributes, so like in example 1 I need a simple way to call all the processes but I don't know how to do this without hard coding the elements name is the function call. Is there a way to recursively call a function to match a child element name? I did see the xpath functionality but I don't see how to use this for attributes. Any ideas? Also does the XML in the examples look correct? can I structure my XML like this? Example 1: <application> <processes> <process id="123" name="run batch A" /> <process id="122" name="run batch B" /> <process id="129" name="run batch C" /> </processes> <connections> <databases> <database usr="test" pss="test" hst="test" dbn="test" /> </databases> <shells> <ssh usr="test" pss="test" hst="test-2" /> <ssh usr="test" pss="test" hst="test-1" /> </shells> </connections> </application> Example 2: <config> <queues> <queue id="1" name="test" /> <queue id="2" name="production" /> <queue id="3" name="error" /> </queues> </config> Pseudo code: // Would return matching process id getProcess($process_id) { return the process attributes as array that are in the XML } // Would return matching DBN (database name) getDatabase($database_name) { return the database attributes as array that are in the XML } // Would return matching SSH Host getSSHHost($ssh_host) { return the ssh attributes as array that are in the XML } // Would return matching SSH User getSSHUser($ssh_user) { return the ssh attributes as array that are in the XML } // Would return matching Queue getQueue($queue_id) { return the queue attributes as array that are in the XML } EDIT: Can I pass two parms? on the first method you have suggested @Gordon public function findProcessById($id, $name) { $attr = false; $el = $this->xml->xpath("//process[@id='$id']"); // How do I also filter by the name? if($el && count($el) === 1) { $attr = (array) $el[0]->attributes(); $attr = $attr['@attributes']; } return $attr; }

  Read the article

• How can you add a UIGestureRecognizer to a UIBarButtonItem as in the common undo/redo UIPopoverContr

  - by SG

  Problem In my iPad app, I cannot attach a popover to a button bar item only after press-and-hold events. But this seems to be standard for undo/redo. How do other apps do this? Background I have an undo button (UIBarButtonSystemItemUndo) in the toolbar of my UIKit (iPad) app. When I press the undo button, it fires it's action which is undo:, and that executes correctly. However, the "standard UE convention" for undo/redo on iPad is that pressing undo executes an undo but pressing and holding the button reveals a popover controller where the user selected either "undo" or "redo" until the controller is dismissed. The normal way to attach a popover controller is with presentPopoverFromBarButtonItem:, and I can configure this easily enough. To get this to show only after press-and-hold we have to set a view to respond to "long press" gesture events as in this snippet: UILongPressGestureRecognizer *longPressOnUndoGesture = [[UILongPressGestureRecognizer alloc] initWithTarget:self action:@selector(handleLongPressOnUndoGesture:)]; //Broken because there is no customView in a UIBarButtonSystemItemUndo item [self.undoButtonItem.customView addGestureRecognizer:longPressOnUndoGesture]; [longPressOnUndoGesture release]; With this, after a press-and-hold on the view the method handleLongPressOnUndoGesture: will get called, and within this method I will configure and display the popover for undo/redo. So far, so good. The problem with this is that there is no view to attach to. self.undoButtonItem is a UIButtonBarItem, not a view. Possible solutions 1) [The ideal] Attach the gesture recognizer to the button bar item. It is possible to attach a gesture recognizer to a view, but UIButtonBarItem is not a view. It does have a property for .customView, but that property is nil when the buttonbaritem is a standard system type (in this case it is). 2) Use another view. I could use the UIToolbar but that would require some weird hit-testing and be an all around hack, if even possible in the first place. There is no other alternative view to use that I can think of. 3) Use the customView property. Standard types like UIBarButtonSystemItemUndo have no customView (it is nil). Setting the customView will erase the standard contents which it needs to have. This would amount to re-implementing all the look and function of UIBarButtonSystemItemUndo, again if even possible to do. Question How can I attach a gesture recognizer to this "button"? More specifically, how can I implement the standard press-and-hold-to-show-redo-popover in an iPad app? Ideas? Thank you very much, especially if someone actually has this working in their app (I'm thinking of you, omni) and wants to share...

  Read the article

• Rails - embedded polymorphic comment list + add comment form - example?

  - by odigity

  Hey, all. Working on my first Rails app. I've searched all around - read a bunch of tutorials, articles, and forum posts, watched some screencasts, and I've found a few examples that come close to what I'm trying to do (notably http://railscasts.com/episodes/154-polymorphic-association and ep 196 about nested model forms), but not exactly. I have two models (Podcast and BlogPost) that need to be commentable, and I have a Comment model that is polymorphically related to both. The railscasts above had a very similar example (ep 154), but Ryan used a full set of nested routes, so there were specific templates for adding and editing comments. What I want to do is show the list of comments right on the Podcast or BlogPost page, along with an Add Comment form at the bottom. I don't need a separate add template/route, and I don't need the ability to edit, only delete. This is a pretty common design on the web, but I can't find a Rails example specifically about this pattern. Here's my current understanding: I need routes for the create and delete actions, of course, but there are no templates associated with those. I'm also guessing that the right approach is to create a partial that can be included at the bottom of both the Podcast and BlogPost show template. The logical name for the partial seems to me to be something like _comments.html.haml. I know it's a common convention to have the object passed to the partial be named after the template, but calling the object 'comments' seems to not match my use case, since what I really need to pass is the commentable object (Podcast or BlogPost). So, I guess I'd use the locals option for the render partial call? (:commentable = @podcast). Inside the partial, I could call commentable.comments to get the comments collection, render that with a second partial (this time with the conventional use case, calling the partial _comment.html.haml), then create a form that submits to... what? REST-wise, it should be a POST to the collection, which would be /podcast|blogpost/:id/comments, and I think the helper for that is podcast_comments_path(podcast) if it were a podcast - not sure what to do though, since I'm using polymorphic comments. That would trigger the Comment.create action, which would then need to redirect back to the podcast|blogpost path /podcast|blogpost/:id. It's all a bit overwhelming, which is why I was really hoping to find a screencast or example that specifically implements this design.

  Read the article

• How to avoid using duplicate savepoint names in nested transactions in nested stored procs?

  - by Gary McGill

  I have a pattern that I almost always follow, where if I need to wrap up an operation in a transaction, I do this: BEGIN TRANSACTION SAVE TRANSACTION TX -- Stuff IF @error <> 0 ROLLBACK TRANSACTION TX COMMIT TRANSACTION That's served me well enough in the past, but after years of using this pattern (and copy-pasting the above code), I've suddenly discovered a flaw which comes as a complete shock. Quite often, I'll have a stored procedure calling other stored procedures, all of which use this same pattern. What I've discovered (to my cost) is that because I'm using the same savepoint name everywhere, I can get into a situation where my outer transaction is partially committed - precisely the opposite of the atomicity that I'm trying to achieve. I've put together an example that exhibits the problem. This is a single batch (no nested stored procs), and so it looks a little odd in that you probably wouldn't use the same savepoint name twice in the same batch, but my real-world scenario would be too confusing to post. CREATE TABLE Test (test INTEGER NOT NULL) BEGIN TRAN SAVE TRAN TX BEGIN TRAN SAVE TRAN TX INSERT INTO Test(test) VALUES (1) COMMIT TRAN TX BEGIN TRAN SAVE TRAN TX INSERT INTO Test(test) VALUES (2) COMMIT TRAN TX DELETE FROM Test ROLLBACK TRAN TX COMMIT TRAN TX SELECT * FROM Test DROP TABLE Test When I execute this, it lists one record, with value "1". In other words, even though I rolled back my outer transaction, a record was added to the table. What's happening is that the ROLLBACK TRANSACTION TX at the outer level is rolling back as far as the last SAVE TRANSACTION TX at the inner level. Now that I write this all out, I can see the logic behind it: the server is looking back through the log file, treating it as a linear stream of transactions; it doesn't understand the nesting/hierarchy implied by either the nesting of the transactions (or, in my real-world scenario, by the calls to other stored procedures). So, clearly, I need to start using unique savepoint names instead of blindly using "TX" everywhere. But - and this is where I finally get to the point - is there a way to do this in a copy-pastable way so that I can still use the same code everywhere? Can I auto-generate the savepoint name on the fly somehow? Is there a convention or best-practice for doing this sort of thing? It's not exactly hard to come up with a unique name every time you start a transaction (could base it off the SP name, or somesuch), but I do worry that eventually there would be a conflict - and you wouldn't know about it because rather than causing an error it just silently destroys your data... :-(

  Read the article

• mciSendString cannot save to directory path

  - by robUK

  Hello, VS C# 2008 SP1 I have a created a small application that records and plays audio. However, my application needs to save the wave file to the application data directory on the users computer. The mciSendString takes a C style string as a parameter and has to be in 8.3 format. However, my problem is I can't get it to save. And what is strange is sometime it does and sometimes it doesn't. Howver, most of the time is failes. However, if I save directly to the C drive it works first time everything. I have used 3 different methods that I have coded below. The error number that I get when it fails is 286."The file was not saved. Make sure your system has sufficient disk space or has an intact network connection" Many thanks for any suggestins, [DllImport("winmm.dll",CharSet=CharSet.Auto)] private static extern uint mciSendString([MarshalAs(UnmanagedType.LPTStr)] string command, StringBuilder returnValue, int returnLength, IntPtr winHandle); [DllImport("winmm.dll", CharSet = CharSet.Auto)] private static extern int mciGetErrorString(uint errorCode, StringBuilder errorText, int errorTextSize); [DllImport("Kernel32.dll", CharSet=CharSet.Auto)] private static extern int GetShortPathName([MarshalAs(UnmanagedType.LPTStr)] string longPath, [MarshalAs(UnmanagedType.LPTStr)] StringBuilder shortPath, int length); // Stop recording private void StopRecording() { // Save recorded voice string shortPath = this.shortPathName(); string formatShortPath = string.Format("save recsound \"{0}\"", shortPath); uint result = 0; StringBuilder errorTest = new StringBuilder(256); // C:\DOCUME~1\Steve\APPLIC~1\Test.wav // Fails result = mciSendString(string.Format("{0}", formatShortPath), null, 0, IntPtr.Zero); mciGetErrorString(result, errorTest, errorTest.Length); // command line convention - fails result = mciSendString("save recsound \"C:\\DOCUME~1\\Steve\\APPLIC~1\\Test.wav\"", null, 0, IntPtr.Zero); mciGetErrorString(result, errorTest, errorTest.Length); // 8.3 short format - fails result = mciSendString(@"save recsound C:\DOCUME~1\Steve\APPLIC~1\Test.wav", null, 0, IntPtr.Zero); mciGetErrorString(result, errorTest, errorTest.Length); // Save to C drive works everytime. result = mciSendString(@"save recsound C:\Test.wav", null, 0, IntPtr.Zero); mciGetErrorString(result, errorTest, errorTest.Length); mciSendString("close recsound ", null, 0, IntPtr.Zero); } // Get the short path name so that the mciSendString can save the recorded wave file private string shortPathName() { string shortPath = string.Empty; long length = 0; StringBuilder buffer = new StringBuilder(256); // Get the length of the path length = GetShortPathName(this.saveRecordingPath, buffer, 256); shortPath = buffer.ToString(); return shortPath; }

  Read the article

• Solving embarassingly parallel problems using Python multiprocessing

  - by gotgenes

  How does one use multiprocessing to tackle embarrassingly parallel problems? Embarassingly parallel problems typically consist of three basic parts: Read input data (from a file, database, tcp connection, etc.). Run calculations on the input data, where each calculation is independent of any other calculation. Write results of calculations (to a file, database, tcp connection, etc.). We can parallelize the program in two dimensions: Part 2 can run on multiple cores, since each calculation is independent; order of processing doesn't matter. Each part can run independently. Part 1 can place data on an input queue, part 2 can pull data off the input queue and put results onto an output queue, and part 3 can pull results off the output queue and write them out. This seems a most basic pattern in concurrent programming, but I am still lost in trying to solve it, so let's write a canonical example to illustrate how this is done using multiprocessing. Here is the example problem: Given a CSV file with rows of integers as input, compute their sums. Separate the problem into three parts, which can all run in parallel: Process the input file into raw data (lists/iterables of integers) Calculate the sums of the data, in parallel Output the sums Below is traditional, single-process bound Python program which solves these three tasks: #!/usr/bin/env python # -*- coding: UTF-8 -*- # basicsums.py """A program that reads integer values from a CSV file and writes out their sums to another CSV file. """ import csv import optparse import sys def make_cli_parser(): """Make the command line interface parser.""" usage = "\n\n".join(["python %prog INPUT_CSV OUTPUT_CSV", __doc__, """ ARGUMENTS: INPUT_CSV: an input CSV file with rows of numbers OUTPUT_CSV: an output file that will contain the sums\ """]) cli_parser = optparse.OptionParser(usage) return cli_parser def parse_input_csv(csvfile): """Parses the input CSV and yields tuples with the index of the row as the first element, and the integers of the row as the second element. The index is zero-index based. :Parameters: - `csvfile`: a `csv.reader` instance """ for i, row in enumerate(csvfile): row = [int(entry) for entry in row] yield i, row def sum_rows(rows): """Yields a tuple with the index of each input list of integers as the first element, and the sum of the list of integers as the second element. The index is zero-index based. :Parameters: - `rows`: an iterable of tuples, with the index of the original row as the first element, and a list of integers as the second element """ for i, row in rows: yield i, sum(row) def write_results(csvfile, results): """Writes a series of results to an outfile, where the first column is the index of the original row of data, and the second column is the result of the calculation. The index is zero-index based. :Parameters: - `csvfile`: a `csv.writer` instance to which to write results - `results`: an iterable of tuples, with the index (zero-based) of the original row as the first element, and the calculated result from that row as the second element """ for result_row in results: csvfile.writerow(result_row) def main(argv): cli_parser = make_cli_parser() opts, args = cli_parser.parse_args(argv) if len(args) != 2: cli_parser.error("Please provide an input file and output file.") infile = open(args[0]) in_csvfile = csv.reader(infile) outfile = open(args[1], 'w') out_csvfile = csv.writer(outfile) # gets an iterable of rows that's not yet evaluated input_rows = parse_input_csv(in_csvfile) # sends the rows iterable to sum_rows() for results iterable, but # still not evaluated result_rows = sum_rows(input_rows) # finally evaluation takes place as a chain in write_results() write_results(out_csvfile, result_rows) infile.close() outfile.close() if __name__ == '__main__': main(sys.argv[1:]) Let's take this program and rewrite it to use multiprocessing to parallelize the three parts outlined above. Below is a skeleton of this new, parallelized program, that needs to be fleshed out to address the parts in the comments: #!/usr/bin/env python # -*- coding: UTF-8 -*- # multiproc_sums.py """A program that reads integer values from a CSV file and writes out their sums to another CSV file, using multiple processes if desired. """ import csv import multiprocessing import optparse import sys NUM_PROCS = multiprocessing.cpu_count() def make_cli_parser(): """Make the command line interface parser.""" usage = "\n\n".join(["python %prog INPUT_CSV OUTPUT_CSV", __doc__, """ ARGUMENTS: INPUT_CSV: an input CSV file with rows of numbers OUTPUT_CSV: an output file that will contain the sums\ """]) cli_parser = optparse.OptionParser(usage) cli_parser.add_option('-n', '--numprocs', type='int', default=NUM_PROCS, help="Number of processes to launch [DEFAULT: %default]") return cli_parser def main(argv): cli_parser = make_cli_parser() opts, args = cli_parser.parse_args(argv) if len(args) != 2: cli_parser.error("Please provide an input file and output file.") infile = open(args[0]) in_csvfile = csv.reader(infile) outfile = open(args[1], 'w') out_csvfile = csv.writer(outfile) # Parse the input file and add the parsed data to a queue for # processing, possibly chunking to decrease communication between # processes. # Process the parsed data as soon as any (chunks) appear on the # queue, using as many processes as allotted by the user # (opts.numprocs); place results on a queue for output. # # Terminate processes when the parser stops putting data in the # input queue. # Write the results to disk as soon as they appear on the output # queue. # Ensure all child processes have terminated. # Clean up files. infile.close() outfile.close() if __name__ == '__main__': main(sys.argv[1:]) These pieces of code, as well as another piece of code that can generate example CSV files for testing purposes, can be found on github. I would appreciate any insight here as to how you concurrency gurus would approach this problem. Here are some questions I had when thinking about this problem. Bonus points for addressing any/all: Should I have child processes for reading in the data and placing it into the queue, or can the main process do this without blocking until all input is read? Likewise, should I have a child process for writing the results out from the processed queue, or can the main process do this without having to wait for all the results? Should I use a processes pool for the sum operations? If yes, what method do I call on the pool to get it to start processing the results coming into the input queue, without blocking the input and output processes, too? apply_async()? map_async()? imap()? imap_unordered()? Suppose we didn't need to siphon off the input and output queues as data entered them, but could wait until all input was parsed and all results were calculated (e.g., because we know all the input and output will fit in system memory). Should we change the algorithm in any way (e.g., not run any processes concurrently with I/O)?

  Read the article

• How can this C and PHP programmer learn Ruby and Rails?

  - by Winston

  I came from a C, php and bash background, it was easy to learn because they all have the same C structure, which I can associate with what I already know. Then 2 years ago I learned Python and I learned it quite well, Python is easier for me to learn than Ruby. Then since last year, I was trying to learn Ruby, then Rails, and I admit, until now I still couldn't get it, the irony is that those are branded as easy to learn, but for a seasoned programmer like me, I just couldn't associate it with what I learned before, I have 2 books on both Ruby and Rails, and when I'm reading it nothing is absorbed into my mind, and I'm close to giving up... In ruby, I'm having a hard time grasping the concepts of blocks, and why there's @variables that can be accessed by other functions, and what does $variable and :variable do? And in Rails, why there's function like this_is_another_function_that_do_this, so thus ruby, is it just a naming convention or it's auto-generated with thisvariable _can_do_this_function. I'm still puzzled that where all those magic concepts and things came from? And now, 1 year of trying and absorbing, but still no progress... Edit: To summarize: How can I learn about blocks, and how can it be related to concepts from PHP/C? Variables, what does does it mean when a variable is prefixed with: @ $ : "Magic concepts", suchs as rails declarations of Records, what happens behind the scenes when I write has_one X OK so, bear with me with my confusion, at least I'm honest with myself, and it's over a year now since I first trying to learn ruby, and I'm not getting younger.. so I learned this in Bash/C/PHP solve_problem($problem) { if [ -e $problem == "trivial" ]; then write_solution(); else breakdown_problem_into_N_subproblems(\; define_relationship_between_subproblems; for i in $( command $each_subproblem ); do solve_problem $i done fi } write_solution(problem) { some_solution=$(command <parameters> "input" | command); command | command $some_solution > output_solved_problem_to_file } breakdown_problem_into_N_subproblems($problems) { for i in $problems; do command $i | command > i_can_output_a_file_right_away done } define_relationship_between_subproblems($problems) { if [ -e $problem == "relationship" ]; then relationship=$(command; command | command; command;) elsif [ -e $problem == "another_relationship" ]; relationship=$(command; command | command; command;) fi } In C/PHP is something like this solve_problem(problem) { if (problem == trivial) write_solution; else { breakdown_problem_into_N_subproblems; define_relationship_between_subproblems; for (each_subproblem) solve_problems(subproblem); } } And now, I just couldn't connect the dots with Ruby, |b|{ blocks }, using @variables, :variables, and variables_with_this_things..

  Read the article

• Do you still limit line length in code?

  - by Noldorin

  This is a matter on which I would like to gauge the opinion of the community: Do you still limit the length of lines of code to a fixed maximum? This was certainly a convention of the past for many languages; one would typically cap the number of characters per line to a value such as 80 (and more recnetly 100 or 120 I believe). As far as I understand, the primary reasons for limiting line length are: Readability - You don't have to scroll over horizontally when you want to see the end of some lines. Printing - Admittedly (at least in my experience), most code that you are working on does not get printed out on paper, but by limiting the number of characters you can insure that formatting doesn't get messed up when printed. Past editors (?) - Not sure about this one, but I suspect that at some point in the distant past of programming, (at least some) text editors may have been based on a fixed-width buffer. I'm sure there are points that I am still missing out, so feel free to add to these... Now, when I tend to observe C or C# code nowadays, I often see a number of different styles, the main ones being: Line length capped to 80, 100, or even 120 characters. As far as I understand, 80 is the traditional length, but the longer ones of 100 and 120 have appeared because of the widespread use of high resolutions and widescreen monitors nowadays. No line length capping at all. This tends to be pretty horrible to read, and I don't see it too often, though it's certainly not too rare either. Inconsistent capping of line length. The length of some lines are limited to a fixed maximum (or even a maximum that changes depending on the file/location in code), while others (possibly comments) are not at all. My personal preference here (at least recently) has been to cap the line length to 100 in the Visual Studio editor. This means that in a decently sized window (on a non-widescreen monitor), the ends of lines are still fully visible. I can however see a few disadvantages in this, especially when you end up writing code that's indented 3 or 4 levels and then having to include a long string literal - though I often take this as a sign to refactor my code! In particular, I am curious what the C and C# coders (or anyone who uses Visual Studio for that matter) think about this point, though I would be interested in hearing anyone's thoughts on the subject. Edit Thanks for the all answers - I appreciate the variety of opinions here, all presenting sound reasons. Consensus does seem to be tipping in the direction of always (or almost always) limit the line length. Interestingly, it seems to be in various coding standards to limit the line length. Judging by some of the answers, both the Python and Google CPP guidelines set the limit at 80 chars. I haven't seen anything similar regarding C# or VB.NET, but I would be curious to see if there are ones anywhere.

  Read the article

• Release Process Improvements

  - by wallismark

  The process of creating a new build and releasing it to production is a critical step in the SDLC but it is often left as an afterthought and varies greatly from one company to the next. I'm hoping people will share improvements they have made to this process in their organisation so we can all takes steps to 'reduce the pain'. So the question is, specify one painful/time consuming part of your release process and what did you do to improve it? My example: at a previous employer all developers made database changes on one common development database. Then when it came to release time, we used Redgate's SQL Compare to generate a huge script from the differences between the Dev and QA databases. This works reasonably well but the problems with this approach are:- ALL changes in the Dev database are included, some of which may still be 'works in progress'. Sometimes developers made conflicting changes (that were not noticed until the release was in production) It was a time consuming and manual process to create and validate the script (by validate I mean, try to weed out issues like problem 1 and 2). When there were problems with the script (eg the order in which things were run such as creating a record which relies on a foreign key record which is in the script but not yet run) it took time to 'tweak' it so it ran smoothly. It's not an ideal scenario for Continuous Integration. So the solution was:- Enforce a policy of all changes to the database must be scripted. A naming convention was important for ensuring the correct running order of the scripts. Create/Use a tool to run the scripts at release time. Developers had their own copy of the database do develop against (so there was no more 'stepping on each others toes') The next release after we started this process was much faster with fewer problems, indeed the only problems found were due to people 'breaking the rules', eg not creating a script. Once the issues with releasing to QA were fixed, when it came time to release to production it was very smooth. We applied a few other changes (like introducing CI) but this was the most significant, overall we reduced release time from around 3 hours down to a max of 10-15 minutes.

  Read the article

• ASP.NET Client to Server communication

  - by Nelson

  Can you help me make sense of all the different ways to communicate from browser to client in ASP.NET? I have made this a community wiki so feel free to edit my post to improve it. Specifically, I'm trying to understand in which scenario to use each one by listing how each works. I'm a little fuzzy on UpdatePanel vs CallBack (with ViewState): I know UpdatePanel always returns HTML while CallBack can return JSON. Any other major differences? ...and CallBack (without ViewState) vs WebMethod. CallBack goes through most of the Page lifecycle, WebMethod doesn't. Any other major differences? IHttpHandler Custom handler for anything (page, image, etc.) Only does what you tell it to do (light server processing) Page is an implementation of IHttpHandler If you don't need what Page provides, create a custom IHttpHandler If you are using Page but overriding Render() and not generating HTML, you probably can do it with a custom IHttpHandler (e.g. writing binary data such as images) By default can use the .axd or .ashx file extensions -- both are functionally similar .ashx doesn't have any built-in endpoints, so it's preferred by convention Regular PostBack (System.Web.UI.Page : IHttpHandler) Inherits Page Full PostBack, including ViewState and HTML control values (heavy traffic) Full Page lifecycle (heavy server processing) No JavaScript required Webpage flickers/scrolls since everything is reloaded in browser Returns full page HTML (heavy traffic) UpdatePanel (Control) Control inside Page Full PostBack, including ViewState and HTML control values (heavy traffic) Full Page lifecycle (heavy server processing) Controls outside the UpdatePanel do Render(NullTextWriter) Must use ScriptManager If no client-side JavaScript, it can fall back to regular PostBack with no JavaScript (?) No flicker/scroll since it's an async call, unless it falls back to regular postback. Can be used with master pages and user controls Has built-in support for progress bar Returns HTML for controls inside UpdatePanel (medium traffic) Client CallBack (Page, System.Web.UI.ICallbackEventHandler) Inherits Page Most of Page lifecycle (heavy server processing) Takes only data you specify (light traffic) and optionally ViewState (?) (medium traffic) Client must support JavaScript and use ScriptManager No flicker/scroll since it's an async call Can be used with master pages and user controls Returns only data you specify in format you specify (e.g. JSON, XML...) (?) (light traffic) WebMethod Class implements System.Web.Service.WebService HttpContext available through this.Context Takes only data you specify (light traffic) Server only runs the called method (light server processing) Client must support JavaScript No flicker/scroll since it's an async call Can be used with master pages and user controls Returns only data you specify, typically JSON (light traffic) Can create instance of server control to render HTML and sent back as string, but events, paging in GridView, etc. won't work PageMethods Essentially a WebMethod contained in the Page class, so most of WebMethod's bullet's apply Method must be public static, therefore no Page instance accessible HttpContext available through HttpContext.Current Accessed directly by URL Page.aspx/MethodName (e.g. with XMLHttpRequest directly or with library such as jQuery) Setting ScriptManager property EnablePageMethods="True" generates a JavaScript proxy for each WebMethod Cannot be used directly in user controls with master pages and user controls Any others?

  Read the article

• Debugging site written mainly in JScript with AJAX code injection

  - by blumidoo

  Hello, I have a legacy code to maintain and while trying to understand the logic behind the code, I have run into lots of annoying issues. The application is written mainly in Java Script, with extensive usage of jQuery + different plugins, especially Accordion. It creates a wizard-like flow, where client code for the next step is downloaded in the background by injecting a result of a remote AJAX request. It also uses callbacks a lot and pretty complicated "by convention" programming style (lots of events handlers are created on the fly based on certain object names - e.g. current page name, current step name). Adding to that, the code is very messy and there is no obvious inner structure - the functions are scattered in the code, file names do not reflect the business role of the code, lots of functions and code snippets are most likely not used at all etc. PROBLEM: How to approach this code base, so that the inner flow of the code can be sort-of "reverse engineered" using a suite of smart debugging tools. Ideally, I would like to be able to attach to the running application and step through the code, breaking on each new function call. Also, it would be nice to be able to create a "diagram of calls" in the application (i.e. in order to run a particular page logic, this particular flow of function calls was executed in a particular order). Not to mention to be able to run a coverage analysis, identifying potentially orphaned code fragments. I would like to stress out once more, that it is impossible to understand the inner logic of the application just by looking at the code itself, unless you have LOTS of spare time and beer crates, which I unfortunately do not have :/ (shame...) An IDE of some sort that would aid in extending that code would be also great, but I am currently looking into possibility to use Visual Studio 2010 to do the job, as the site itself is a mix of Classic ASP and ASP.NET (I'd say - 70% Java Script with jQuery, 30% ASP). I have obviously tried FireBug, but I was unable to find a way to define a breakpoint or step into the code, which is "injected" into the client JS using AJAX calls (i.e. the application retrieves the code by invoking an URL and injects it to the client local code). Venkman debugger had similar issues. Any hints would be welcome. Feel free to ask additional questions.

  Read the article

• a question about rails general practice with REST, json, and ajax

  - by Nik

  Hi all, I have this question concerning REST I think: I have read a few rest tutorials and the feeling I get from them is that each action in a restful controller tends to be lean and almost single purpose: "Index gives off a collection of a model show gives off one model edit/new a prep place for changing/create a model update/create changes and makes new model deletes removes one model" After reading all these tutorials, rest seems to be to be a means to create an interface for a model, much like active resource type of thing. the mantra seems to be "controller provides data and data only and is also pretty convention over configuration, so expect projects_path to return a bunch of projects" I can understand that, and I like the cleanliness. But here's when I run into some trouble in reality in applying these guidelines: say three models, Project with attrib title, User with attrib name, and Location with attrib address. Say in views/users/index.html.erb, I want to use Ajax to fetch and display a project in a div#project_display when the user clicks on a project element, I know that I can use views/projects/show.js.rjs like this: page.replace_html 'project_display' "#{@project.name}" where in the projects_controller.rb def show @project = Project.find(params[:id]) repsond_to do |format| format.js and other formats... end end I have no problem in doing that for a couple of years now. BUT doesn't that mean that my JS response for the project#show action is LOCkED to present data to div#project_display element and show only whatever I that rjs template says it should show? That's very limiting and doesn't sound very "interface" like. I have never used JSON before or much XML, so I thought, maybe the JS response should send back raw stuff, like JSON and somehow the page on which the ajax request was called has the instruction on what do to with these raw data. That sounds a lot more flexible, doesn't it? Because look back at that exmpale, what if in the views/locations/index.html.erb, I want to do the exact same thing except I want to put the response in div#project_goes_here and the response should be #{project.name} I know this is a trivial change but that's the point: the RJS only allows one template at a time. So I think the JSON route is the way to go, but how does the already loaded page, the one that the ajax call came from, know when or how to "look forward" to incoming data? I read that PrototypeJS has this template thing, I wouldn't mind using it with JSON, but if you can demonstrate this or other means for displaying received-from-ajax data, I am all attention. Thank You

  Read the article

• In Ruby, how does coerce() actually work?

  - by Jian Lin

  It is said that when we have a class Point and knows how to perform point * 3 like the following: class Point def initialize(x,y) @x, @y = x, y end def *(c) Point.new(@x * c, @y * c) end end point = Point.new(1,2) p point p point * 3 Output: #<Point:0x336094 @x=1, @y=2> #<Point:0x335fa4 @x=3, @y=6> but then, 3 * point is not understood: Point can't be coerced into Fixnum (TypeError) So we need to further define an instance method coerce: class Point def coerce(something) [self, something] end end p 3 * point Output: #<Point:0x3c45a88 @x=3, @y=6> So it is said that 3 * point is the same as 3.*(point) that is, the instance method * takes an argument point and invoke on the object 3. Now, since this method * doesn't know how to multiply a point, so point.coerce(3) will be called, and get back an array: [point, 3] and then * is once again applied to it, is that true? point * 3 which is the same as point.*(3) and now, this is understood and we now have a new Point object, as performed by the instance method * of the Point class. The question is: 1) who invokes point.coerce(3) ? Is it Ruby automatically, or is it some code inside of * method of Fixnum by catching an exception? Or is it by case statement that when it doesn't know one of the known types, then call coerce? 2) Does coerce always need to return an array of 2 elements? Can it be no array? Or can it be an array of 3 elements? 3) And is the rule that, the original operator (or method) * will then be invoked on element 0, with the argument of element 1? (element 0 and element 1 are the two elements in that array returned by coerce) Who does it? Is it done by Ruby or is it done by code in Fixnum? If it is done by code in Fixnum, then it is a "convention" that everybody follows when doing a coerce? So could it be the code in * of Fixnum do something like this: if (something.typeof? ...) else if ... # other type else if ... # other type else # if it is not a type I know array = something.coerce(self) return array[0].*(array[1]) end

  Read the article

• How to define an extern, C struct returning function in C++ using MSVC?

  - by DK

  The following source file will not compile with the MSVC compiler (v15.00.30729.01): /* stest.c */ #ifdef __cplusplus extern "C" { #endif struct Test; extern struct Test make_Test(int x); struct Test { int x; }; extern struct Test make_Test(int x) { struct Test r; r.x = x; return r; } #ifdef __cplusplus } #endif Compiling with cl /c /Tpstest.c produces the following error: stest.c(8) : error C2526: 'make_Test' : C linkage function cannot return C++ class 'Test' stest.c(6) : see declaration of 'Test' Compiling without /Tp (which tells cl to treat the file as C++) works fine. The file also compiles fine in DigitalMars C and GCC (from mingw) in both C and C++ modes. I also used -ansi -pedantic -Wall with GCC and it had no complaints. For reasons I will go into below, we need to compile this file as C++ for MSVC (not for the others), but with functions being compiled as C. In essence, we want a normal C compiler... except for about six lines. Is there a switch or attribute or something I can add that will allow this to work? The code in question (though not the above; that's just a reduced example) is being produced by a code generator. As part of this, we need to be able to generate floating point nans and infinities as constants (long story), meaning we have to compile with MSVC in C++ mode in order to actually do this. We only found one solution that works, and it only works in C++ mode. We're wrapping the code in extern "C" {...} because we want to control the mangling and calling convention so that we can interface with existing C code. ... also because I trust C++ compilers about as far as I could throw a smallish department store. I also tried wrapping just the reinterpret_cast line in extern "C++" {...}, but of course that doesn't work. Pity. There is a potential solution I found which requires reordering the declarations such that the full struct definition comes before the function foward decl., but this is very inconvenient due to the way the codegen is performed, so I'd really like to avoid having to go down that road if I can.

  Read the article

• Few iPhone noob questions

  - by mshsayem

  Why should I declare local variables as 'static' inside a method? Like: static NSString *cellIdentifier = @"Cell"; Is it a performance advantage? (I know what 'static' does; in C context) What does this syntax mean?[someObj release], someObj = nil; Two statements? Why should I assign nil again? Is not 'release' enough? Should I do it for all objects I allocate/own? Or for just view objects? Why does everyone copy NSString, but retains other objects (in property declaration)? Yes, NSStrings can be changed, but other objects can be changed also, right? Then why 'copy' for just NSString, not for all? Is it just a defensive convention? Shouldn't I release constant NSString? Like here:NSString *CellIdentifier = @"Cell"; Why not? Does the compiler allocate/deallocate it for me? In some tutorial application I observed these (Built with IB): Properties(IBOutlet, with same ivar name): window, someLabel, someTextField, etc etc... In the dealloc method, although the window ivar was released, others were not. My question is: WHY? Shouldn't I release other ivars(labels, textField) as well? Why not? Say, I have 3 cascaded drop-down lists. I mean, based on what is selected on the first list, 2nd list is populated and based on what is selected on the second list, 3rd list is populated. What UI components can reflect this best? How is drop-down list presented in iPhone UI? Tableview with UIPicker? When should I update the 2nd, 3rd list? Or just three labels which have touch events? Can you give me some good example tutorials about Core-Data? (Not just simple data fetching and storing on 2/3 tables with 1/2 relationship) How can I know whether my app is leaking memory? Any tools?

  Read the article

• Calling cdecl Functions That Have Different Number of Arguments

  - by KlaxSmashing

  I have functions that I wish to call based on some input. Each function has different number of arguments. In other words, if (strcmp(str, "funcA") == 0) funcA(a, b, c); else if (strcmp(str, "funcB") == 0) funcB(d); else if (strcmp(str, "funcC") == 0) funcC(f, g); This is a bit bulky and hard to maintain. Ideally, these are variadic functions (e.g., printf-style) and can use varargs. But they are not. So exploiting the cdecl calling convention, I am stuffing the stack via a struct full of parameters. I'm wondering if there's a better way to do it. Note that this is strictly for in-house (e.g., simple tools, unit tests, etc.) and will not be used for any production code that might be subjected to malicious attacks. Example: #include <stdio.h> typedef struct __params { unsigned char* a; unsigned char* b; unsigned char* c; } params; int funcA(int a, int b) { printf("a = %d, b = %d\n", a, b); return a; } int funcB(int a, int b, const char* c) { printf("a = %d, b = %d, c = %s\n", a, b, c); return b; } int funcC(int* a) { printf("a = %d\n", *a); *a *= 2; return 0; } typedef int (*f)(params); int main(int argc, char**argv) { int val; int tmp; params myParams; f myFuncA = (f)funcA; f myFuncB = (f)funcB; f myFuncC = (f)funcC; myParams.a = (unsigned char*)100; myParams.b = (unsigned char*)200; val = myFuncA(myParams); printf("val = %d\n", val); myParams.c = (unsigned char*)"This is a test"; val = myFuncB(myParams); printf("val = %d\n", val); tmp = 300; myParams.a = (unsigned char*)&tmp; val = myFuncC(myParams); printf("a = %d, val = %d\n", tmp, val); return 0; } Output: gcc -o func func.c ./func a = 100, b = 200 val = 100 a = 100, b = 200, c = This is a test val = 200 a = 300 a = 600, val = 0

  Read the article

• Combined sign in and registration page?

  - by Ryan

  This is somewhat against rails convention but I am trying to have one controller that manages both user session authentication and user registration. I am having troubles figuring out how to go about this. So far I am merging the User Controller and the Sessions Controller and having the 'new' method deliver both a new usersession and a new user instance. With the new routes in rails 3 though, I am having trouble figuring out how to generate forms for these items. Below is the code: user_controller.rb class UserController < ApplicationController def new @user_session = UserSession.new @user = User.new end def create_user @user = User.new(params[:user]) if @user.save flash[:notice] = "Account Successfully Registered" redirect_back_or_default signup_path else render :action => new end end def create_session @user_session = UserSession.new(params[:user_session]) if @user_session.save flash[:notice] = "Login successful!" redirect_back_or_default login_path else render :action => new end end end views/user/new.html.erb <div id="login_section"> <% form_for @user_session do |f| -%> <%= f.label :email_address, "Email Address" %> <%= f.text_field :email %> <%= f.label :password, "Password" %> <%= f.text_field :password %> <%= f.submit "Login", :disable_with => 'Logining...' %> <% end -%> </div> <div id="registration_section"> <% form_for @user do |f| -%> <%= f.label :email_address, "Email Address" %> <%= f.text_field :email %> <%= f.label :password, "Password" %> <%= f.text_field :password %> <%= f.label :password_confirmation, "Password Confirmation" %> <%= f.text_field :password_confirmation %> <%= f.submit "Register", :disable_with => 'Logining...' %> <% end -%> </div> I imagine I will need to use :url = something for those forms, but I am unsure how to specify. Within routes.rb I have yet to specify either Usersor UserSessions as resources (not convinced that this is the best way to do it... but I could be). I would like, however, the registration and login on the same page and have implemented this by doing the following: routes.rb match 'signup' => 'user#new' match 'login' => 'user#new' What's the best way to go about solving this?

  Read the article

• Stepping into Ruby Meta-Programming: Generating proxy methods for multiple internal methods

  - by mstksg

  Hi all; I've multiply heard Ruby touted for its super spectacular meta-programming capabilities, and I was wondering if anyone could help me get started with this problem. I have a class that works as an "archive" of sorts, with internal methods that process and output data based on an input. However, the items in the archive in the class itself are represented and processed with integers, for performance purposes. The actual items outside of the archive are known by their string representation, which is simply number_representation.to_s(36). Because of this, I have hooked up each internal method with a "proxy method" that converts the input into the integer form that the archive recognizes, runs the internal method, and converts the output (either a single other item, or a collection of them) back into strings. The naming convention is this: internal methods are represented by _method_name; their corresponding proxy method is represented by method_name, with no leading underscore. For example: class Archive ## PROXY METHODS ## ## input: string representation of id's ## output: string representation of id's def do_something_with id result = _do_something_with id.to_i(36) return nil if result == nil return result.to_s(36) end def do_something_with_pair id_1,id_2 result = _do_something_with_pair id_1.to_i(36), id_2.to_i(36) return nil if result == nil return result.to_s(36) end def do_something_with_these ids result = _do_something_with_these ids.map { |n| n.to_i(36) } return nil if result == nil return result.to_s(36) end def get_many_from id result = _get_many_from id return nil if result == nil # no sparse arrays returned return result.map { |n| n.to_s(36) } end ## INTERNAL METHODS ## ## input: integer representation of id's ## output: integer representation of id's def _do_something_with id # does something with one integer-represented id, # returning an id represented as an integer end def do_something_with_pair id_1,id_2 # does something with two integer-represented id's, # returning an id represented as an integer end def _do_something_with_these ids # does something with multiple integer ids, # returning an id represented as an integer end def _get_many_from id # does something with one integer-represented id, # returns a collection of id's represented as integers end end There are a couple of reasons why I can't just convert them if id.class == String at the beginning of the internal methods: These internal methods are somewhat computationally-intensive recursive functions, and I don't want the overhead of checking multiple times at every step There is no way, without adding an extra parameter, to tell whether or not to re-convert at the end I want to think of this as an exercise in understanding ruby meta-programming Does anyone have any ideas? edit The solution I'd like would preferably be able to take an array of method names @@PROXY_METHODS = [:do_something_with, :do_something_with_pair, :do_something_with_these, :get_many_from] iterate through them, and in each iteration, put out the proxy method. I'm not sure what would be done with the arguments, but is there a way to test for arguments of a method? If not, then simple duck typing/analogous concept would do as well.

  Read the article

< Previous Page | 166 167 168 169 170 171 172 173 174 175 176 177  | Next Page >