Search Results

Search found 6486 results on 260 pages for 'drivers license'.

Page 170/260 | < Previous Page | 166 167 168 169 170 171 172 173 174 175 176 177  | Next Page >

  • Is there a Linux distro that will easily run "embedded style" on a Raspberry Pi?

    - by Dan Harper
    I need a Linux distro that will give me the following: Run on a Raspberry Pi Can reliably survive power loss (like via a read-only filesystem) I've been able to hunt down some documentation on how to change a regular Linux distro over to read-only mode. I was hoping that there would be a distro already built that was designed to run in an embedded environment. I don't need many packages or drivers, just enough to have the Pi working with USB/Ethernet. I don't need any GUI interface or anything, this will just be running a custom service built in C. Does anyone know of a distro that would fit?

    Read the article

  • USB MFP print server that works with Windows x64?

    - by hangy
    Right now, we are using the Longshine LCS-MFP101-2 to connect to our MFP device (printer/scanner combo) over LAN. However, the required driver (RMVUSB, Remote Virtual USB) cannot be installed on 64 bit Windows operating systems such as Windows XP x64 or Windows 7 x64. Since the distributor lists the product as "phased out", I do not expect any updated 64 bit drivers any time soon. :/ Because of that, I am searching for a relatively cheap SOHO MFP print server (1 USB port should be enough) which can be used with 32 bit and 64 bit versions of Windows. Do you have any ideas or recommendations? Thanks!

    Read the article

  • MacBook Pro Boot Camp SPDIF passthrough?

    - by Ryan Zink
    I'm using Windows 7 through Boot Camp on a unibody Macbook Pro and am having problems using the SPDIF output. I get the expected Dolby Digital or DTS in some movies, but in other movies and in games (Source engine, StarCraft 2) where the output is enabled to 5.1, the output invariably shows up as Dolby Pro Logic, which means (I think) that passthrough is not enabled. The boot camp drivers for the sound card don't have any sort of control panel, and the Windows settings for enabling DTS and Dolby seem to work when I test those outputs in the sound settings. Is there some other setting or utility I can use to enable SPDIF passthrough for all programs?

    Read the article

  • Bluetooth device won't re-add after being removed (Windows 7)

    - by HericDenis
    I've got a SBH52 headset, it works fine on my android phone, then I tried to use it with my Windows 7 PC, then it won't work because Microsoft Windows dosen't have native support for A2DP connections and one of the answers on the previous link said that removing the device from "devices and printers", running this software and then re-add the device would solve the problem. But the big problem is that they won't pair again: I tried, hopelessly, the suggested fixes from Windows, it won't work. By the way, it is Windows 7 (x64), it just looks like Windows 8. I had this problem once many years ago with other PC and Bluetooth device, I remember it had something to do with drivers that were not removed and I tried to delete them from somewhere, and as far as I remember it worked, but no idea how. In short, how can I pair it again with my PC?

    Read the article

  • How do I get my Nvidia monitor position settings (in Linux) to persist after a restart?

    - by machineghost
    I have two monitors, and I run them both in Linux using the proprietary Nvidia drivers with "TwinView". I just installed Linux Mint 13, and since the install after every reboot my monitors come up in the wrong position (the computer thinks the left monitor is on the right). After boot-up I can run the Nvidia config and fix the monitors' position, and I can even save the configuration file successfully. But as soon as I restart again, the monitors re-appear switched. Does anyone have any idea what might be causing this (and more importantly, how I can solve it?)

    Read the article

  • Print server not being recognized after switching router and upgrading to 64 bit

    - by picardo
    I recently upgraded Windows 7 from 32 bit to 64 bit. I also switched my router from a very old model of Netgear to TP-Link. Before these updates, I had been using a USB print server by IOGear. After the updates, I took care to reinstall the drivers for both the print server and the printer, and picked the option to install a printer via TCP/IP, but no matter what I did, the driver software couldn't locate the print server on my network. I hit refresh, restarted my machine, turned off the firewalls and tried again. Still nothing. I'm at my wit's end. What else is left to try? Edit: More info. The print server is connected to the router via LAN line. The computer is connected to the router with a wireless connection.

    Read the article

  • Sparse matrices / arrays in Java

    - by DanM
    I'm working on a project, written in Java, which requires that I build a very large 2-D sparse array. Very sparse, if that makes a difference. Anyway: the most crucial aspect for this application is efficency in terms of time (assume loads of memory, though not nearly so unlimited as to allow me to use a standard 2-D array -- the key range is in the billions in both dimensions). Out of the kajillion cells in the array, there will be several hundred thousand cells which contain an object. I need to be able to modify cell contents VERY quickly. Anyway: Does anyone know a particularly good library for this purpose? It would have to be Berkeley, LGPL or similar license (no GPL, as the product can't be entirely open-sourced). Or if there's just a very simple way to make a homebrew sparse array object, that'd be fine too. I'm considering MTJ, but haven't heard any opinions on its quality. Thanks!! -Dan

    Read the article

  • How do I get Windows 7 To Recognize a newly installed RAID 5 volume?

    - by GregH
    I had a previously running Windows 7 (64 bit) system. I added 3 new 1TB Seagate drives that I set up as a RAID 5 volume. I have a Gigabyte GA-P55M-UD2 motherboard. I installed the drives, set up the BIOS and configured the three drives as a RAID volume through the RAID setup utility that was accessed via Ctrl-I while the system was booting. I rebooted the system and could see the drives during the boot sequence. However, when Windows 7 was starting I got an error (quick blue screen) and then Windows tried to repair itself with no success. Do I need to install RAID drivers in Windows? How do I do it if Windows won't boot? Thanks in advance.

    Read the article

  • I reinstalled OS X and the system was the same as before

    - by slhck
    Strange thing happened. I want so sell my old Macbook and therefore used a disk image of the Snow Leopard DVD that I restored onto an external drive. I booted off the drive and went through the installation steps. Now I really would like to perform "archive and install", as there might be some files that I need later, but I didn't see the option. The only options for installation I had, were, including others, optional printer drivers and Rosetta. So I just clicked through and I wasn't given any other option. After about 45 minutes, my system booted again, and voila, there was my old system. Nothing changed. How should I proceed to actually reset the system? All I have is that Snow Leopard DVD image.

    Read the article

  • Nvidia GeForce 410m

    - by user1789927
    I have a Lenovo v570 with a Nvidia GeForce 410m with cuda. It came with windows 7 and everything works well. However I just got bored of windows 7 and I'm yearning for xp. I installed xp and got everything to work except the Nvidia driver. In their website there is only the windows 7 nvidia driver available. I searched http://www.geforce.com/drivers/results/26388 and got a driver for the 400m series. I tried the software and it didn't work, message << THIS GRAPHICS DRIVER COULD NOT FIND COMPATIBLE GRAPHICS HARDWARE . I also tried : http://forums.laptopvideo2go.com/topic/29285-v29610-windows-xp-32bit-nvidia/ This time the error message 'REQUIRED FILES ARE MISSING' Any help will be grateful.

    Read the article

  • Problem restarting my Ubuntu system

    - by VoY
    Whenever I try to restart my Ubuntu either from the command line by typing reboot or in GNOME the computer goes from X to console, starts the shutdown process and then a message saying "[ some number ] Starting new kernel" appears on the screen and the computer goes back to X login screen. I suspect this must have something to do with nvidia drivers, because it seemed to have appeared around the time I bought a new graphic card. Also, when I reboot the second time I see weird graphical artifacts on the screen. When I boot from ubuntu live cd I can reboot just fine. I used jaunty, recently I switched to karmic with no change. This bug is very annoying, because I have to hard reset my computer in order to reboot. Also not good for the filesystems, I suspect. Can you suggest a way to debug the cause or if not at least the easiest way to go about reinstalling ubuntu without losing customizations/settings/data?

    Read the article

  • Windows 7: blue faces in VLC... sometimes

    - by Mala
    Hi There are a bunch of forum posts about this issue from the last several years but no resolution that I could find. I have the newest VLC installed on Windows 7 with the newest nvidia drivers. Suddenly, VLC plays some videos in such a way as faces are blue. When viewed in another media player, or when looking at the thumbnails, this is not an issue. Other videos are not affected. I've tried resetting VLC options, deleting the VLC folder in the AppData area, etc. I have no other color issues. Does anyone have a fix?

    Read the article

  • Packet loss with Broadcom wireless and Ubuntu

    - by stevemegson
    I have a machine with Ubuntu 9.04 and a Broadcom BCM4306 wireless card which has been running quite happily for many months with the b43legacy driver that's suggested by Hardware Drivers. Suddenly, I'm now seeing crippling packet loss, varying between 30% and 90% when pinging the router. My WinXP machine is still quite happy even when sat next to the Ubuntu box, so I assume that it's not some new source of interference. What else is likely to have changed? How should I go about diagnosing and fixing this?

    Read the article

  • Is there a fingerprint reader api/sdk?

    - by Nir
    I need to read the user's fingerprint from my application. What I really want is a simple SDK that works with a lot of inexpensive fingerprint readers but I can deal with something that works only with one specific model if that model is cheap and available worldwide. And it has to be royalty-free, I can pay for a development license but if I have to pay for each installation I just can't use it. What I'm doing has no relation to login or encryption, so the software included with the reader will probably be useless to me.

    Read the article

  • Lenovo DVD Drive Disabled After Windows 7 Install

    - by David Lacher
    Upgraded hard drive in Lenovo T61P; decided to start fresh with Windows 7 Pro. Windows installed, so DVD drive was working. All of a sudden, driver is not recognized. Device is "HL-DT-ST DVDRAM GSA-U10N ATA Device". It appears on device manager but with the yellow tag; have tried uninstalling, searching for drivers, everything I can think of. Cannot even start over with Windows 7 installation disk because disk spins but then stops and My Computer does not recognize the drive. Help please. thank you. David Lacher

    Read the article

  • Cross platform support for network attached USB hubs?

    - by larsks
    I am looking at network-attached USB hubs in order to run licensed software in a virtualized environment when hardware dongles are required. Are there any solutions that will work with both Linux and Windows? Most of the dedicated devices -- such as the Zonet ZUH2214 or the (oddly expensive) Digi AnywherUSB/2 -- appear to be Windows-only. Linux has the the USB/IP project, for which there appear to be Windows drivers, but the last "News" post on the site was in 2007, so I'm not entirely confident about the viability of the project. Has anyone out there found a solution that will work well in both environments?

    Read the article

  • NIC models for HVM guests in Xen 4.0

    - by Jed Daniels
    Is there a list of NIC models that I should use with various HVM guests in Xen 4.0? Is there even a list of possible choices for the model=field? I'm planning on running both Windows and FreeBSD guests on the particular Xen box that I'm configuring now, and ideally I'd like a setting that can work on both of them and get me gigabit speeds without a lot of extra hassle loading special drivers (similar to VMware's e1000 NIC option). Any suggestions? The vif line I'm currently using in my config is: vif = [ 'type=ioemu,bridge=eth0,model=ne2k_pci,script=vif-ovs' ] This works in my Windows XP SP3 VM, but is only recognized as a 10Mbit interface. Changing to model=e1000 or model=i82557b resulted in Windows not being able to find a driver for the NIC.

    Read the article

  • Does any know fix/cause of USB drives that lose connection

    - by Burch Kealey
    I have been having significant problems trying to copy files to a USB drive (G0-Flex 1.5 tb) No matter what I use to try to copy the files (python code, Windows copy and paste or Drobo Copy utility) I ultimately get a failure. The failure is always some indication that the device is not ready or able to be written to. I am pretty sure the problem is that the drive is losing its connection. I have done everything I can find so far including setting the USB Root hub to never turn off the power, I updated some usb drivers etc. I have found references to this problem primarily with Win7-64 bit. I have also had USB connection problems with other devices- we kept losing a connection to our Bravo Disc Publisher when we went to Win7 and finally bought a newer model and have not had problems since. Any pointers about diagnosing and or understanding the problem would be appreciated.

    Read the article

  • Intel 520 SSD drives not working with lsi controller on VMware esxi 5

    - by Michael
    We have a problem with our LSI 9266 controller. LSI have vmware drivers which normally show the health status of connected drives, raid controller, battery etc from within the vSphere Client. This driver also allows connectivity from the LSI MSM utility from a windows workstation. The problem is as soon as I connect my intel 520 SSD drives the health status in the vsphere client disappears, also we lose connectivity via the LSI MSM utlity. Any other drives we test are fine, 1TB SAS drives, other SSD drives etc are all OK. The Intel drives are on the compatability list and are supported by LSI but dont work with the VMware driver. If I install a windows OS on the physical server we have no problems. I have logged a ticket with LSI but they havent been very helpful. I am trying to find other people that may have had the same issue and maybe even a fix

    Read the article

  • Speedup vmware esx guest hdd access

    - by Uwe
    Hello, we run several windows servers and windows clients on our vmware esx. One of the Windows 2003 Servers is a build-server with major HDD-reads/writes. as it is our build server. This machine was a hardware before and was virtualized to the ESX. Is there any way to increase the HDD-Performance? Perhaps there are special windows (guest) drivers? The files are stored on a Raid6 base. Performance graph of vmware infrastructure client shows reads up to 650 KBps and writes up to 4000 KBps. Thank you. Regards, Uwe

    Read the article

  • Lenovo DVD Drive Disabled After Windows 7 Install

    - by David Lacher
    Upgraded hard drive in Lenovo T61P; decided to start fresh with Windows 7 Pro. Windows installed, so DVD drive was working. All of a sudden, driver is not recognized. Device is "HL-DT-ST DVDRAM GSA-U10N ATA Device". It appears on device manager but with the yellow tag; have tried uninstalling, searching for drivers, everything I can think of. Cannot even start over with Windows 7 installation disk because disk spins but then stops and My Computer does not recognize the drive. Help please. thank you. David Lacher

    Read the article

  • Horizontal scrolling not working in Windows 7 running on MBP using Boot Camp

    - by Rubicon
    Is there a way to enable horizontal scrolling on Windows installed on a bootcamp partition of MBP 13" Core 2 Duo, using a trackpad? I had a look into the Boot Camp Control panel settings, but could not find a setting that suggested this. I used the Boot Camp drivers that came with the MBP in the Mac OS X Install disk. The vertical scroll is working fine, and the horizontal scroll works fine in the Mac world of things, so the hardware is fine. I think maybe there might be an additional install for a driver that we may have to install? Or any update? Thanks in advance for all your help. :)

    Read the article

  • Windows 7 does not recognise second display output

    - by gilles27
    I've got a PC with dual BenQ G2222HDL monitors and an ATI Radeon HD 4650 video card. I've been running both monitors at 1920x1080 for some months now but last week the second monitor switched to a lower resolution and won't let me go back to 1920x1080. If I right click the Desktop and choose Screen Resolution from the menu, I get two items in the Display: drop down list BenQ G2222HDL D-SUB Display device on: VGA In the past 2 was always the same as 1. If I click Detect a third item appears Available display output on: ATI Radeon HD 4650 but if I use the Multiple displays: drop down list to use it says "No display detected" and then lets me choose from either "Connect anyway on S-Video" or "Connect anyway on Component", neither of which help. It seems like Windows 7 recognises the card is dual-head, and knows I have got two monitors, but can't link it all together. I have checked and all my drivers are up-to-date. Does anyone have any suggestions as to how I can get the second monitor working properly again?

    Read the article

  • How to fix skipping/stuttering audio in Google Chrome

    - by Droid
    If I play Google Music, or a Youtube video in the Chrome browser, and then open a new tab and start typing the address bar, the audio will quickly cut in and out as I am typing (with almost every letter I type). It also is choppy if I play the video and start typing in the start menu. I can not repeat this behavior using internet explorer. Based on that Im thinking that it maybe a problem with the version of flash Chrome is using but I'm not sure. Any ideas? Im running 32 bit windows 7, i.e. 9, and chrome 23.0 pc is a lenovo t43p. I have the latest sound drivers. i.e. is using flash 11.5.502. chrome is using : Adobe Flash Player - Version: 11.5.31.2 Only one (this) plugin is listed for flash in the chrome plugins list.

    Read the article

  • WHEA_UNCORRECTABLE_ERROR BSOD - what is wrong?

    - by Arcane
    Hello I have a problem with my PC getting the WHEA_UNCORRECTABLE_ERROR bsod. It is a few months old pc. I am not overclocking or changing anything in bios, but sometimes (this is my third time) I get this bsod out of nowhere. This last time I was just watching some stream on twitch when the pc suddenly crashed. I have everything up to date in windows update and every other driver as well. Everything in Open hardware Monitor seems ok. Right now as of 10 min after the crash, the CPU temp is at 38°C, fans are at 1400RPM I am using Windows 8.1 Pro 64b. Here are my spec: Intel i5-4570 CPU @ 3.20GHz, Kingston HyperX 8GB DDR3 1600 XMP, GeForce GTX 660 with 340.52 drivers, Corsair VS450 power supply, Gigabyte GA-H87-HD3 you can see the BSOD dump here: https://www.dropbox.com/s/88i1q2nnqnpzux1/082514-29656-01.dmp?dl=0 Can anybody tell me what is wrong?

    Read the article

< Previous Page | 166 167 168 169 170 171 172 173 174 175 176 177  | Next Page >