Search Results

Search found 9900 results on 396 pages for 'hardware combination'.

Page 171/396 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

  • How can I map my server's IP address to my domain?

    - by samoz
    I rented some server space from a new host and have a static IP address and a domain name that I previously purchased, but I do not know how to register the domain name to point to my server. My previous host did this for me, but my new host only offers hardware, i.e. they won't do it for me. How can I register a domain name I own to point to my server's IP address?

    Read the article

  • Alternate way to create a clone of a UNIX System

    - by Spirit
    THE STORY: (If you don't like to read much, down below is the question :) ) Where I work we have two HP RP2470 servers same hardware same number of hard drives same everything :). One of them is a production server and runs HP-UX 11.00. The poor ba***rd hasn't been turned off for years and now I have to make a clone of it on the other server - just in case, for redundancy. The problem is simple (or not simple) as I have to make the the other server exactly the same. However the old version of OS (UX 11.00 is a history now) and the old software running on it, have made my task almost impossible. On the production server there is also a cloning/recover utility Ignite-UX. I tried many times to create a recovery tape with it. Then when I load the tape on the backup server, it succeeds with the loading of the tape (no errors no warnings) but on the next restart it fails to load the OS :S and drops into HP`s ISL prompt. --- THE QUESTION: Is there an alternate way to create a clone of the Unix System? The environment is: 1. 2x HP RP2470 Servers (non-Intel), same hardware, same number od HDDs (two each of them) same everything. 2. OS running: HP-UX 11.00 The production server has to be cloned without downtime - sadly :( as I hope that they will reconsider on this one For example (like on Windows platforms), if you try to copy an entire HDD with Windows inside on another HDD, and then put that HDD on another PC it will still work, as long as the hardware is the same. Can I do something like that with a Unix system? Can I somehow COPY the contents of the entire HDD, put those on another HDD, and then just load the HDD into the other server? (If you haven't read the story the servers are exactly the same) Will it work? Can it be done with ordinary commands like cp or dump or something like that? Does any one have a similar experience? --- UPDATE: 26.01.2012 NOTE: The update is related to "The Story". If you haven't read that part then you can skip this update. This is just a short update on the recover logs from the Ignite Tape.. someone with more exp. might notice something.. ... --- READING CONTENTS OF THE IGNITE TAPE --- --- OUTPUT OMITED --- ... ... x ./configure3, 413696 bytes, 808 tape blocks x ./monitor_bpr, 20480 bytes, 40 tape blocks * Download_mini-system: Complete * Loading_software: Begin * Installing boot area on disk. * Enabling swap areas. * Backing up LVM configuration for "vg00". * Processing the archive source (Recovery Archive). * Wed Jan 25 15:27:32 EST 2012: Starting archive load of the source (Recovery Archive). * Positioning the tape (/dev/rmt/0mn). * Archive extraction from tape is beginning. Please wait. * Wed Jan 25 15:39:52 EST 2012: Completed archive load of the source (Recovery Archive). * Executing user specified script: "/opt/ignite/data/scripts/os_arch_post_l". * Running in recovery mode (os_arch_post_l). * Running the ioinit command ("/sbin/ioinit -c") * Creating device files via the insf command. insf: Installing special files for sdisk instance 0 address 0/0/1/1.15.0 insf: Installing special files for sdisk instance 1 address 0/0/2/0.1.0 insf: Installing special files for sdisk instance 2 address 0/0/2/1.15.0 insf: Installing special files for stape instance 0 address 0/0/1/0.3.0 insf: Installing special files for btlan instance 0 address 0/0/0/0 insf: Installing special files for btlan instance 1 address 0/2/0/0 insf: Installing special files for pseudo driver dlpi insf: Installing special files for pseudo driver kepd insf: Installing special files for pseudo driver framebuf insf: Installing special files for pseudo driver sad * Running "/opt/upgrade/bin/tlinstall -v" and correcting transition link permissions. * Constructing the bootconf file. * Setting primary boot path to "0/0/1/1.15.0". * Executing: "/var/adm/sw/products/PHSS_20146/pfiles/iux_postload". * Executing: "/var/adm/sw/products/PHSS_25982/pfiles/iux_postload". NOTE: tlinstall is searching filesystem - please be patient NOTE: Successfully completed * Loading_software: Complete * Build_Kernel: Begin NOTE: Since the /stand/vmunix kernel is already in place, the kernel will not be re-built. Note that no mod_kernel directives will be processed. * Build_Kernel: Complete * Boot_From_Client_Disk: Begin * Rebooting machine as expected. NOTE: Rebooting system. sync'ing disks (0 buffers to flush): 0 buffers not flushed 0 buffers still dirty Closing open logical volumes... Done Console reset done. Boot device reset done. ********** VIRTUAL FRONT PANEL ********** System Boot detected ***************************************** LEDs: RUN ATTENTION FAULT REMOTE POWER FLASH OFF OFF ON ON LED State: Running non-OS code. (i.e. Boot or Diagnostics) ... ... ... --- SERVER IS PERFORMING POST SEQUENCE HERE --- --- OUTPUT OMITED --- ... ... ... ***************************************** ************ EARLY BOOT VFP ************* End of early boot detected ***************************************** Firmware Version 43.50 Duplex Console IO Dependent Code (IODC) revision 1 ------------------------------------------------------------------------------ (c) Copyright 1995-2002, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed State CoProcessor State Cache Size Number State Inst Data --------- -------- --------------------- ----------------- ------------ 0 650 MHz Active Functional 750 KB 1.5 MB 1 650 MHz Idle Functional 750 KB 1.5 MB Central Bus Speed (in MHz) : 120 Available Memory : 2097152 KB Good Memory Required : 16140 KB Primary boot path: 0/0/1/1.15 Alternate boot path: 0/0/2/1.15 Console path: 0/0/4/1.643 Keyboard path: 0/0/4/0.0 Processor is starting autoboot process. To discontinue, press any key within 10 seconds. 10 seconds expired. Proceeding... Trying Primary Boot Path ------------------------ Booting... Boot IO Dependent Code (IODC) revision 1 HARD Booted. ISL Revision A.00.38 OCT 26, 1994 ISL booting hpux ISL>

    Read the article

  • How to Setting up Amazon EC2 with own OS and DB ?

    - by Spencer Lim
    i got my own version of OS and DB which are window server 2008 Hyper-V R2 and Sql server R2 2008 both in enterprise version may i know how to configure it up and running ? with amazon EC2, what other is a must combination to make it run ? also how could i install the operating system and DNS ? i never doing server before, but i just need something like VPS to support my development and testing. Amazon Ec2 seem the best and cheapest service due to only $1 per hour. Appreciate if Any brief guide provided, Thx =D

    Read the article

  • Mac OS X 10.5/6, authenticate against by NIS or LDAP when both servers have your username

    - by Wang
    We have an organization-wide LDAP server and a department-only NIS server. Many users have accounts with the same name on both servers. Is there any way to get Leopard/Snow Leopard machines to query one server, and then the other, and let the user log in if his username/password combination matches at least one record? I can get either NIS authentication or LDAP authentication. I can even enable both, with LDAP set as higher priority, and authenticate using the name and password listed on the LDAP server. However, in the last case, if I set the LDAP domain as higher-priority in Directory Utility's search path and then provide the username/password pair listed in the NIS record, then my login is rejected even though the NIS server would accept it. Is there any way to make the OS check the rest of the search path after it finds the username?

    Read the article

  • When Intel/AMD plan to use new CPU sockets? [closed]

    - by psihodelia
    It is very expensive always to use most modern hardware especially buying new mainboard if only a new CPU is desired. It would be much better if one knows whether and when major CPU producers plan to change CPU sockets. Do you know when it is planed to change sockets the next time? I am particularly interested in not buying Intel i7 CPU if a new CPU will be released soon with not compatible pins.

    Read the article

  • Disabling the command enter shortcut on Mac Entourage.

    - by Bruce
    It seems like disabling a shortcut should not be such a big deal, but I cannot seem to be able to do it for any shortcuts and specifically not for the combination that I keep hitting by mistake, every single day. The smaller space bar makes it very easy to hit the command key by mistake, and the return is a commonly used key when typing. I keep sending important e-mails before I am done typing, or worse, before I am done editing. I do not necessarily want to disable all the shortcuts, but that one for sure. The choices for changing anything in Entourage seem very limited. [Entourage for Mac 2008. Version 12.2.8. (101117) ESD] It is easy enough just to hit "send." This short cut causes a lot more trouble than it saves. Help.

    Read the article

  • Assign fixed IP address via DHCP by DNS lookup

    - by Janoszen
    Preface I'm building a virtualization environment with Ubuntu 14.04 and LXC. I don't want to write my own template since the upgrade from 12.04 to 14.04 has shown that backwards compatibility is not guaranteed. Therefore I'm deploying my virtual machines via lxc-create, using the default Ubuntu template. The DNS for the servers is provided by Amazon Route 53, so no local DNS server is needed. I also use Puppet to configure my servers, so I want to keep the manual effort on the deployment minimal. Now, the default Ubuntu template assigns IP addresses via DHCP. Therefore, I need a local DHCP server to assign IP addresses to the nodes, so I can SSH into them and get Puppet running. Since Puppet requires a proper DNS setup, assigning temporary IP addresses is not an option, the client needs to get the right hostname and IP address from the start. Question What DHCP server do I use and how do I get it to assign the IP address based only on the host-name DHCP option by performing a DNS lookup on that very host name? What I've tried I tried to make it work using the ISC DHCP server, however, the manual clearly states: Please be aware that only the dhcp-client-identifier option and the hardware address can be used to match a host declaration, or the host-identifier option parameter for DHCPv6 servers. For example, it is not possible to match a host declaration to a host-name option. This is because the host-name option cannot be guaranteed to be unique for any given client, whereas both the hardware address and dhcp-client-identifier option are at least theoretically guaranteed to be unique to a given client. I also tried to create a class that matches the hostname like this: class "my-client-name" { match if option host-name = "my-client-name"; fixed-address my-client-name.my-domain.com; } Unfortunately the fixed-address option is not allowed in class statements. I can replace it with a 1-size pool, which works as expected: subnet 10.103.0.0 netmask 255.255.0.0 { option routers 10.103.1.1; class "my-client-name" { match if option host-name = "my-client-name"; } pool { allow members of "my-client-name"; range 10.103.1.2 10.103.1.2; } } However, this would require me to administer the IP addresses in two places (Amazon Route53 and the DHCP server), which I would prefer not to do. About security Since this is only used in the bootstrapping phase on an internal network and is then replaced by a static network configuration by Puppet, this shouldn't be an issue from a security standpoint. I am, however, aware that the virtual machine bootstraps with "ubuntu:ubuntu" credentials, which I intend to fix once this is running.

    Read the article

  • Dual DVI external monitors from laptop using HDMI

    - by Andy Evans
    I know there may be a few questions similar to this, but my question is regarding specific hardware configuration. I have an Asus U52f laptop with an HDMI out that I currently use to drive my 24" DVI external monitor. My question is I found an HDMI - dual DVI splitter here and was wanting to know is has anyone tried this type of configuration or would the Matrox DualHead2Go be a better solution.

    Read the article

  • Building a Mac/PC Network in a Dorm with Network Restrictions

    - by user70340
    I have been a Windows XP user for the last few years, but I recently bought a 15'' MacBook Pro for research purposes. I would like to set up a no-hassle Mac/PC Network at home so that I can access the internet on both computers and hardware between computers (i.e. a harddrive, or a mouse/keyboard with Synergy). Unfortunately, I live in a dorm with silly network restrictions so a solution is not straightforward. In particular: The dorm has a wired and wireless network, both which provide an internet connection. The wired network provides way faster internet (download speeds of 15 MB/s vs. 2 MB/s on wireless), so I would like to somehow exploit this, at least on my PC for Bittorrent :) Multiple devices can connect to the wireless network, but cannot "see" each other on the network (so software like Synergy would not work). Only 1 MAC address can connect to the wired network at a time. Ideally I would just connect a wireless router to the wired network and then have both the Mac and the PC on that, but the 1 MAC address restriction will not allow the both computer to access the internet simultaneously. I cannot think of a way to bypass this restriction (though I'm not network savvy), so I am planning to create a private no-internet network to allow the devices to see each other and share hardware. Here are some thoughts. I would appreciate any feedback at all! If I build a private wireless network: (first choice) I will use a wireless router that is not connected to the internet. My PC and Mac will be connected to each other wirelessly. I can then connect the PC to the internet via a wired network, but then the Mac will not have internet access as its wireless card is already in use. In this case, could I stream internet access from the PC to the Mac via the wireless network? Or could I buy a USB wireless card for the Mac so that it can connect to both my private network and the dorm network? If I build a private wired network: (second choice) Then both the PC and the Mac will connect to the internet wirelessly, which means I cannot take advantage of the faster download speeds.

    Read the article

  • Sendmail /etc/hosts and DNS ... what is the correct way?

    - by ben
    I found one tutorial on setting up sendmail that says that in the /etc/hosts file, "The entry for 127.0.0.1 must always be followed by the fully qualified domain name (FQDN) of the server." Like so: 127.0.0.1 bigboy.my-site.com localhost.localdomain localhost bigboy (This tutorial is here). However, I can't find anyone else suggesting something like that. instead most people seem to put some combination of localhost and localdomain.localhost after 127.0.0.1, and then some variant of the fully qualified domain name after the public ip address. What is the correct way?

    Read the article

  • How should I use LVM with Ganeti?

    - by javano
    I am building a small Ganeti cluster on some low end hardware (I only have the resources given sadly). I am confused as to the use of LVMs with DRBD. I have two instances and three nodes. What I want is instance1 replicated between node 1 & 2, and instance2 replicated between nodes 3 & 2 (so node2 is doing nothing, except waiting for either node1 or 3 to fail, is it is the secondary node for both instances). This is because node2 is a lower hardware spec than 1 and 3, so I just want it as an hot-spare. How can I achieve this? I don't want instance1 being replicated to node3 for example, nor instance2 replicated to node1. Nodes 1 & 2 have /dev/sda5 which is 150GBs (for example). Nodes 2 & 3 have /dev/sda6 which is also 75GBs (for example). Using just nodes 1 & 2, after looking at the Ganeti docs I would; vgcreate my-vg Next I would create the cluster via gnt-cluster VG = "my-vg". It is here I believe that I am missing some knowledge. I believe that what I need to do is create the same Logical Volume on nodes 1 & 2 in Volume Group "my-vg", that solely consists of /dev/sda5 and call it "lv1". Then create an Logical Volume on nodes 2 & 3 the solely consists of /dev/sda6 in "my-vg" that is called "lv2". When creating instance1 I would then use "-vg=lv1 -n node1:node2", and when creating instance2 I would use "-vg=lv2 -n node3:node2". I breifly had a go at this today and I'm dubious if this will be possible. When trying to create instance2, "lv2" wont exist on node1 (the cluster master) so I don't believe it will allow the instance creation. Could I create a 1kb parition (/dev/sda6) on node1 and put it into a LV called "lv2" or is that too flakey? Is this set up possible? Thank you.

    Read the article

  • How do you set up DNS in Window Server 2008 in a Hyper-V environment?

    - by Nathan DeWitt
    I have a laptop running Server 2008 and Hyper-V. I have created a virtual machine that is also running Server 2008, that I used dcpromo to create as a domain controller. I disabled IPv6 because I had no idea how to enter a default address, and I just wanted to make a standalone MOSS dev environment. I have tried every combination of creating a virtual network on the host and then connecting to that in the VM, but I can't get the VM to communicate with the host and vice versa. No pinging, no copy and paste, nothing. Thanks. To update: My VM (which is its own DC) currently does not have a static IP. When I set the IP to static, I could not find anything that would let it talk to the host machine.

    Read the article

  • Intel GMA 4500MHD flickering in opengl

    - by Aaron
    I have an application that uses OpenGL for its display. When this application is run on a laptop with an Intel GMA 4500MHD on Windows XP the OpenGL content appears to flicker/shudder between 2 frames. I have experienced the exact same problem when running this application on nVidia Quadro FX hardware, however with nVidia the problem can be corrected by disabling the "Unified Back Buffer" (UBB) feature in the driver. Does anybody know how I can disable the corresponding feature in the Intel driver?

    Read the article

  • Remotely Installing Windows 2008 on SunBlade 6000/6250... any gotchas?

    - by Warpraptor
    I'm preparing to remotely install Windows 2008 Standard onto a 6250 blade module mounted in a SunBlade 6000 chassis rack. Are there any gotchas (aside from the predictable issues related to bandwidth in transferring the ISO, etc.) for this? Has anyone else successfully completed this task? I'm not a hardware guy, I'm a software guy who has been handed this task because the guys in the datacenter don't want to touch it. Any help is appreciated.

    Read the article

  • Bootable and remote controllable imaging software?

    - by stefan.at.wpf
    I am looking for an imaging software, that one can boot from CD or usb stick (therefore without installing anything on the system!) and then control by some kind of remote desktop. So something like a combination of Acronis TrueImage's Bootable Media and Windows Remote Desktop. I don't even need to be able to store the backup on a network drive, as an external usb hdd is attached for these purposes. Background: A system that is normally controlled by SSH / command line and therefore has no keyboard/mouse connected that I could use to control Acronis TrueImage.

    Read the article

  • Enter / Return key stops working

    - by andygrunt
    I have a Dell Latitude E5400 laptop running Windows 7. Everything runs fine on it for days then I suddenly notice the enter/return key is no longer working e.g. I could be writing an email, press enter for a new line but it doesn’t ‘register’ – so no new line. I thought it might be some dirt under the key perhaps so I tried running the Windows onscreen keyboard but the Enter key on that doesn’t work either. A reboot always fixes the problem but it’s a pain. Any ideas a) how to fix it and b) out of interest, is there some other key combination that I can use as an alternative to using the Enter key when I need to?

    Read the article

  • Network and Server Management Tools

    - by jessieE
    We are building a farm of test servers. Currently we have 8 servers. We are planning to use the servers to test the following Mysql Cluster Xen or KVM virtualization Heartbeat/Pacemaker/DRDB What tools do experienced sysads use for: Initial installation of operating system( installing centos 5 or ubuntu server manually 8 times seems like a tedious task that just begs for automation) Centralized Configuration Management and Software Updates for Host and possibly Guest(virtualized) servers Hardware, Services and Network Monitoring

    Read the article

  • Proxying fake domain to a localhost port

    - by Trevor Burnham
    I'd like to do much the same thing described at Redirect Domain Name to Localhost for web app development purposes, but with the twist that I'd like requests to fakedomain.com:80 to be routed to localhost:8080, say, so that I don't have to actually use my development machine's port 80. I'd welcome answers that take the form of: Small changes to configuration files like /etc/hosts, and/or An easy-to-configure proxy server I could run Note: Pow takes the approach of setting a firewall rule to forward all incoming traffic on port 80 to port 20559. That may be an acceptable solution, but ideally, I'd like to forward only a specific domain + port combination.

    Read the article

  • How do I choose the number of connection for load balancer?

    - by user105196
    I want to add hardware load balancer for apache and I want to know how many people are connected to my server to to choose the type of load balancer: Local Load Balancing with SSL - 250 Connections Local Load Balancing with SSL - 500 Connections Local Load Balancing with SSL - 1000 Connections I run the following commands in the same time: netstat -nt|grep -c :443 ( all connection wait and ESTABLISHED) result : 1208 netstat -ant | grep 443 | grep EST | wc -l ( just ESTABLISHED connection) result :106 My question: Whichever is the correct value to choose the load balancer all connection or just ESTABLISHED ?

    Read the article

  • How can I map my server's domain to my IP address?

    - by samoz
    I rented some server space from a new host and have a static IP address and a domain name that I previously purchased, but I do not know how to register the domain name to point to my server. My previous host did this for me, but my new host only offers hardware, i.e. they won't do it for me. How can I register a domain name I own to point to my server's IP address?

    Read the article

  • sp_releaseapplock timeout expired cause?

    - by Darian Miller
    I've been using a combination of sp_getapplock and sp_releaseapplock for some custom application locking purposes for years now with success and just the last few days I've started to get some timeout expired errors on a sp_releaseapplock which is a bit puzzling. When listing the current locks, there's less than a dozen of these active, and the rest of the dedicated server is way underutilized at the moment (less than 100 batches/sec with a mutli-processor, 32GB Ram, higher end machine.) Is there a specific resource to be monitored that may point me in the right direction for determing why such a lightweight operation is timing out? This is called within a stored proc with a timeout of 120 seconds which seems to be amazingly long for this operation to timeout on. SQL 2000 SP4 running on Windows 2003 Server. TSQL used (@pLockUniqueName is VarChar(255)) EXEC @pLockSuccess = sp_getapplock @pLockUniqueName, 'Exclusive', 'Session', 0 EXEC @pUnLockSuccess = sp_releaseapplock @pLockUniqueName, 'Session' Thanks, Darian

    Read the article

  • Random Computer Crashes

    - by Josh W.
    Ok, here's a wierd one for you all. Occasionally my PC here at work will crash in a very peculiar way. My dual monitors will suddenly go blank as if there is no longer a video signal, the USB mouse light will go dark and mouse stays unresponsive, the keyboard lights will not change status when the appropriate keys are pressed (Num/Caps/Scoll Lock). The CD Tray WILL open and close. But the computer will not respond to a ping request. For all intents & purposes it's as if the computer is off, except it wasn't intentional by me. The power light and internal fans are still on and I've now lost any unsaved work. Now here's where it gets wierd. This PC is part of a batch of PC's we got from a local vendor who does our initial system builds. Mine, and 6 other co-workers PCs all have the same issue. Originally we thought it was a bad combination of hardware, but through trial and error the only thing we haven't eliminated are the OS, Mobo & CPU. The problem was so bad for some of them that they ended up going back to their 5 year old dinosaurs in order to get some work done, for me the problem isn't as bad, maybe once every other day or so, but still enough to bite me in the ass if I've forgotten my ritualistic pressing of CTRL-S every 1-5 minutes. In this case we've tried two different video cards, two different power supplies, two different memory configurations, running on a UPS/not on UPS, updating/rolling back video drivers, three different bios revisions. The only things we haven't swapped are the mobo & cpu, mainly because a new mobo means a new Hardware Abstraction Layer, ie re-install of windows and there's alot of other software on this PC that takes forever to reload by hand. There was a base image that our systems team created with all the drivers installed and the basic setup of software our company uses, but they then must customize the setup for us programmers so it takes a while to get a new configuration up and going. I'm a programmer by day and am usually pretty good at diagnosing computer problems whether through trial and error or not. We've pretty much exhausted all the ideas we can think of here, short of a new mobo/cpu. Was hoping someone out there might have anything else we can try.. Relevant Parts: OS: XP Pro 32-bit Motherboard: Intel DG41RQ CPU: Intel Core-2 Quad Q9400 @ 2.66GHz Current BIOS Version/Date Intel Corp. RQG4110H.86A.0014.2010.0306.1151, 3/6/2010 Dual LCD's, Viewsonic VG930m & Samsung SyncMaster 910v (other people have different models, but listed in case there's some very wierd problem with the signals being sent/received) PS/2 Keyboard USB Microsoft Intellimouse BIOS Versions Tried: R 0013 12/23/2009 R 0014 3/6/2010 Video cards Tried GeForce 8400 GS Radeon HD 4350 - ASUS EAH4350 Two Different Power Supplies a 380W & 550W Ram Configurations 2GB - 1 x 2GB 4GB - 2 x 2GB

    Read the article

  • How do I establish the network sharing to my WinXP server network drive from my Mac notebook?

    - by mobibob
    I have been able to connect to my WinXP server's shared drives by using Finder's Command-K to browse the network. Unfortunately, when the server gets rebooted, the connection drops and sometimes I cannot get reconnected. I have specified different protocols (afp / cifs / smb) and different login names (connect as...) with limited success. Once I find the right combination, I am good for a few weeks. Once, it seems as though I had to unshared and shared the drive to get it to work. Unfortunately, it is very frustrating, so I try multiple things at one time, so when I finally get to the success point -- I honestly don't know what worked. I followed Mac help, surfed for instructions, issues, etc., but nothing appears to be consistent. I would love for this thread to be the ultimate answer for all time! Can anyone help me? If my description or question need more detail, please ask away!

    Read the article

  • How to stream TV/Films/Music over the internet to various devices from a home server?

    - by ritch0s
    Set up: An always on old-ish laptop connected to a NAS which contains TV/Films/Music. I want to be able to stream on the fly the data on my NAS to various connected devices such as iphone or laptop. I am currently using Orb (orb.com) mycast software but the requirements for the streaming are very high in terms of processing power is there alternative software and dedicated hardware i can add to get maximum benefit from this setup?

    Read the article

  • Recognition of USB drive

    - by lamcro
    I have a Motorola phone, with a MicroSD slot, which my Ubuntu machine does not recognize as a USB drive. It does know there is something there since It automatically charges my phone whenever I connect it. using the command lsusb shows it as "Motorola PCS" Is there a way to tell Ubuntu/Linux that the connected hardware is a disk drive?

    Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >