Search Results

Search found 8673 results on 347 pages for 'kvm switch'.

Page 171/347 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

• Compaq Presario CQ40 unexpected turn off

  - by CRoshanLG

  My Compaq Presario CQ40 (yeah, its pretty old) suddenly turns off after about 1/2 - 1 hour usage without any notice or warning. The power cable and adapter works fine (indicator bulbs show that power is given to the laptop), but it seems like machine suddenly plugged off from the power source. And when I try to switch it on, after the sudden turn off it simply won't turn on. I can only turn it on after letting it to rest for at least couple of hours! ** The battery has been dead for some time now, but it has been working fine on direct power supply until recently. Has anyone encountered this? and hopefully knows any cure?

  Read the article

• Rough estimate for speed advantage of SAN-via-fibre to san-via-iSCSI when using VMware vSphere

  - by Dirk Paessler

  We are in the process of setting up two virtualization servers (DELL R710, Dual Quadcore Xeon CPUs at 2.3 Ghz, 48 GB RAM) for VMware VSphere with storage on a SAN (DELL Powervault MD3000i, 10x 500 GB SAS drives, RAID 5) which will be attached via iSCSI on a Gbit Ethernet Switch (DELL Powerconnect 5424, they call it "iSCSI-optimized"). Can anyone give an estimate how much faster a fiber channel based solution would be (or better "feel")? I don't mean the nominal speed advantage, I mean how much faster will virtual machines effectively work? Are we talking twice the speed, five times, 10 times faster? Does it justify the price? PS: We are not talking about heavily used database servers or exchange servers. Most of the virtualized servers run below 3-5% average CPU load.

  Read the article

• Using a buffalo wl12-pci-g54s on Debian Linux

  - by Nic Hubbard

  I have a buffalo wl12-pci-g54s wireless card that I want to install in my PC running Debian. I need this so I can move the server to a better location in another room. So, is there an easy way to do this? Some package that I can install and get up and running? Other instructions that I found online have been confusing. I am also using a static IP, so I need to retain that when I make the switch. Thanks!

  Read the article

• Can't connect to wireless-n in dual mode.

  - by Tyllyn

  I recently purchased a Acer Aspire Revo AR3610-U9022. This little nettop uses a Atheros AR5B91 Wireless Network Adapter. I also have a Netgear RangeMax NEXT Wireless Route (model WNDR3300). I have been using this router in dual mode (11G and 11N) on my normal desktop without a problem (Mode: Up to 270Mbps at 5GHz & 54Mbps at 2.4 GHz), but doing this, my Revo won't detect the 11N network as being around... my desktop still does, but the Revo, nope... just the 11G. However, when I switch my router over to just "Up to 270Mbps at 2.4GHz", it kills the 11G entirely, but the Revo recognizes the 11N network. I'm a programmer by trade, and this hardware-y stuff confuses me more than it should. Is there any way that I could set this stuff up so my Revo can connect to the 11N part of my router, but keep the 11G around? :) Thanks!

  Read the article

• hardware for pushing buttons

  - by Elazar Leibovich

  Many times I want my computer to interface old hardware. Such as radio, light switch, etc. This mostly involves pushing pressing and moving various buttons and switches. I don't want to buy new hardware I want my computer to interface the old hardware I already have. I thought about it and reached to the conclusion that what I need is a general purpose button-pusher hardware. I need a simple device I can interface by a computer and would be able to push most of the buttons we have in daily accessories, without damaging the button. Is there any such accessory availible?

  Read the article

• Integrated video card not detected after installing new video card

  - by Jaime

  Hi, I got this emachines ET1331G-03W with a built in integrated video card (GeForce 6150SE). I added another video card (e-GeForece 6200 LE) in the hopes that I utilize both and have a dual monitor. But once the additional card was installed, windows 7 does not recognize the integrated video. Is it possible to use both video cards and have a dual monitor setup? Is there a switch on the motherboard that I have to turn on or off to enable the integrated video card along with the new card. Thanks!

  Read the article

• How do internal smtp servers send mail to internal mail servers on the network?

  - by dmr83457

  We have upgraded our internal corporate email server and the IP address has changed internal to our network. A second email server is used for sending bulk jobs for a mailing list service that we offer. Since the switch of the internal corporate server IP we have been seeing problems when the bulk email server is trying to send email to our own domain. The log shows that it is still trying to hit the old corporate server instead of the new one. I have looked through all settings for the bulk email software and see nothing set there to send to internal mail servers, and I do not recall doing anything special to get this working when setup a couple years ago. Is there a setting in Win2003 or on the network that enables the mapping of MX record external IPs to internal IPs so mail gets routed correctly?

  Read the article

• Removing Exchange 2010 and SBS2011 gracefully after migration to Server 2008 Std R2

  - by user145275

  We have recently completed a server replacement for a customer. They had SBS2011 using Exchange 2010. They now have Server 2008 Std R2 and Google Apps email. We have migrated the DHCP, DNS, Filserver and all 5 FSMO roles to the new 2008 R2 server (today). During the grace period for SBS2011 we intend to decomission the old server completely. Previous experience would suggest uninstalling Exchange 2010 then demote SBS2011 then remove from the domain and switch off. Can I simply demote SBS2011 without removing Exchange? Can't really find any walkthroughs on this. My concern is that if we simply turn off SBS2011 the AD is left in a mess with legacy Exchange objects making any potential reintroduction of Exchange difficult in future, plus I want to do it the right way!

  Read the article

• Print server does not show up on router's attached devices

  - by AshTee

  Recently I bought a new more powerful wireless N router, DLink DIR 628. So I removed all connections from the previous router (Netgear WGT624) and connected them as they should be to the DLInk router. Everything works fine except for the print server. I have Hawking print server connected to HP Laserjet 6P parallel port printer. It works well with the Netgear router. But when I connect it to the DLInk router, it does not even show up in the LAN computers list. I am not sure what is going on. There is a utility called PSAdmin that can talk to the Hawking print server if I switch to Netgear router. With that utility, I can get the assigned IP address to the print server. But when switching to DLink router, even the PSAdmin fails to find the print server. I have been trying various things for last couple of days in vein. Please help.

  Read the article

• PC doesn't select right monitor sometimes

  - by Madhur Ahuja

  I have an ACER LCD monitor with Intel G33/G31 display chipset. The preferred resolution for monitor is 1440x900. The drivers for both monitor and display are correctly installed and displayed in Device Manager section. However, I have observed, sometimes, in Display properties, my PC shows Display Device on: VGA instead of Display Device on: Acer , and when that happens, the resolution becomes distorted and I am unable to switch back to 1440x900. However, this problem resolves itself automatically sometimes between reboots. Any idea what's going on ?

  Read the article

• How to optimize mysql databse for serving 1000s of requests at a time ?

  - by Bilal

  How to optimize mysql databse for serving 1000s of requests at a time ? for a site like: linksnappy.com Is it possible to configure 2 seperate mysql servers into one load balancing server? like if one of them is overloaded switch to the next one ? same question for the http requests handling server. Another question : what kind of server do I need to server 1000s of requests at a time ? (http server) you can see the kind of site Im talking about is a download site. the server just dies when we have too many download requests. we currently have intel xeon quad core 2.4ghz with 4gb of ram.

  Read the article

• Connect devices plugged into Raspberry Pi ethernet to WiFi network

  - by Tom

  I'm just starting out on a mission to learn more about networking and I've followed a tutorial (http://raspberrypihq.com/how-to-turn-a-raspberry-pi-into-a-wifi-router/) to turn my Raspberry Pi into a wifi router. That worked really well so I modified it slightly so that I can use a tethered iphone for the internet connection - I just switched all "eth0" references to "eth1" (the iphone interface) and added a script to set everything up when the phone is plugged in. This setup has freed up the Pi's ethernet port so I'd like to try and take this a step further and allow devices plugged into it to connect to the network. If possible, I'd like to try adding a switch so I can connect multiple devices. I've tried fiddling around with nat & iptables with no luck so my question is, how can I connect devices on eth0 to my wlan network?

  Read the article

• Ip doesn't change when switching networks, although automatic ip is set. Cause of the issue known

  - by Julio Acevedo

  I have two routers at my house. Both of them have DCHP server enabled. One of them is 192.168.1.1 and gives adresses from 192.168.1.2 to 192.168.1.32 The other one is 192.168.1.50 and gives adresses from 192.168.1.51 to 192.168.1.99 The problem is that I only have internet access in one because my ip is 192.168.1.7, and when I switch to the other one, the ip remains 192.168.1.7, even though I have automatically get a ip adress in Ipv4. When I manually change my ip to one in the range allowed by the router, I can browse the internet. Any ideas how to solve this? Thank you.

  Read the article

• seeking to upgrade my bash magic. help decipher this command: bash -s stable

  - by tim

  ok so i'm working through a tutorial to get rvm installed on my mac. the bash command to get rvm via curl is curl -L https://get.rvm.io | bash -s stable i understand the first half's curl command at location rvm.io, and that the result is piped to the subsequent bash command, but i'm not sure what that command is doing. My questions: -s : im always confused about how to refer to these. what type of thing is this: a command line argument? a switch? something else? -s : what is it doing? i have googled for about half an hour but not sure how to refer to it makes it difficult. stable : what is this? tl;dr : help me decipher the command bash -s stable to those answering this post, i aspire to one day be as bash literate as you. until then, opstards such as myself thank you for the help!

  Read the article

• Sound from both speakers and headphones with SoundMAX ADI AD1986A on Windows 7: possible?

  - by oKtosiTe

  My ASUS A8N-VM CSM motherboard has an on-board sound chip–the SoundMAX ADI AD1986A. Although sound does work reliably on Windows 7, I was a bit disappointed that neither ASUS nor the manufacturer of the sound chip offer drivers for it for Windows 7 (or Vista for that matter). Among other things jack detection, output to front and read jack simultaneously and surround sound are no longer available using Microsoft's default HD Audio driver under Windows 7. Under Windows XP and several Linux distributions (Arch, Gentoo and Ubuntu) that I've tried everything works as it should. Since I switch between headphones and speakers quite often, this annoyance begs me to ask: aside from buying a sound card, is there any way to get sound from both outputs at the same time?

  Read the article

• Error - installing Adobe Flash Player: "The installer you are trying to use is corrupted or incomple

  - by imageree

  I am using Windows 7 64 bits and Chrome browser. When I try to install Adobe Flash player I get this error: "NSIS Error The installer you are trying to use is corrupted or incomplete. This could be the result of a damaged disk, a failed download or a virus. You may want to contact the author of this installer to obtain a new copy. It may be possible to skip this check using the /NCRC command line switch (NOT RECOMMENDED)." Any idea what is the problem?

  Read the article

• Remote Desktop with resource sharing

  - by Malfist

  I recently removed ubuntu from my laptop and installed Windows 7 because Microsoft's DreamSpark program gave me Visual Studio Pro for free and I want to do some C# programming with it. The problem is that my laptop's screen is small, it's resources are extremely limited, and it doesn't have a full sized keyboard. However, I do have a desktop that is my primary system, and it's got a quadcore and tons of RAM in it, and dual monitors. My question is this, is there a way I can use a program from my laptop, on my desktop, and share my desktops CPU and RAM with the laptop? Everything is connected through a 100 MB/s switch. One caveat, my desktop is running ubuntu.

  Read the article

• Windows Server 2008 R2 DNS Server not working?

  - by wolfvilleian

  Hi, I have a server running Windows Server 2008 R2 hosting a DNS server, exchange 2010 and is a domain controller. One computer on the network (and domain) can ping the server 25% of the time, also when I try to ping it's own hostname it also does not work. However another computer that is on the domain can ping it fine, and another computer on the network but not domain can ping fine as well. The computer that cannot ping the server is setup to use the DNS server running on the server only (secondary dns points to nothing) and it will resolve the hostname of the server to the external IP not internal when the other two computers correctly resolve the internal All 3 computers and server are connected directly into the same switch. Does anyone have any ideas on how to fix this? Thanks

  Read the article

• fsck: FILE SYSTEM WAS MODIFIED after each check with -c, why?

  - by Chris

  Hi I use a script to partition and format CF cards (connected with a USB card writer) in an automated way. After the main process I check the card again with fsck. To check bad blocks I also tried the '-c' switch, but I always get a return value != 0 and the message "FILE SYSTEM WAS MODIFIED" (see below). I get the same result when checking the very same drive several times... Does anyone know why a) the file system is modified at all and b) why this seems to happen every time I check and not only in case of an error (like bad blocks)? Here's the output: linux-box# fsck.ext3 -c /dev/sdx1 e2fsck 1.40.2 (12-Jul-2007) Checking for bad blocks (read-only test): done Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information Volume (/dev/sdx1): ***** FILE SYSTEM WAS MODIFIED ***** Volume (/dev/sdx1): 5132/245760 files (1.2% non-contiguous), 178910/1959896 blocks Thanks, Chris

  Read the article

• TFS2010 Build Controllers

  - by Kabir Rao

  As I know, In TFS2010, One Build Controller serves One Project Collection. And, ideally one build server should have One build controller into it. However, as per the link below- http://marknic.com/2010/05/14/MultipleTFS2010BuildControllersOnASingleBuildBox.aspx we can install mutiple build controller in a single build box. Can two or more build controller can run at a same time. Because the link suggests that, we need to switch between controllers .... Is it that, we can use one controller at a time.

  Read the article

• SVN Merge two reposiories - what about the UUIDs?

  - by grant007

  Hi, This is my scenario: Originally had two seperate repositories, I need to merge these into one repository. I don't care too much about the history in these repositories. I created a new repository and can import the repositories no problem. The issue is with users working copies, I can ask them to switch --relocate them however there is the issue of the UUID which will be different for each original repository: I can only reassign the UUID in the new repository to match one of the original repositories. So what is the best method to resolve this issue? (I suspect/hope I am going about this wrong...) Any ideas appreciated! -Grant.

  Read the article

• Any way to fix alphabetical selection behavior in list widgets in Windows?

  - by KP

  In every version of Windows I've ever used (95 through Vista), the following apparent bug has been present in every list widget, whether drop-down, multi-select, or Explorer folder view: If you use the keyboard to select some item alphabetically, the selection gets "locked" on that item. If I have a list with the contents below, and I press D, then Delta will get selected. At this point, pressing A, B, or G will do nothing unless I first switch focus to another window or control, or remove focus by pressing Esc. If, at the beginning, I press G, then I can keep pressing G to cycle through the Gamma entries, but A, B, or D will do nothing unless I clear the focus. Alpha Beta Beta2 Delta Gamma Gamma2 Gamma3 I don't think I've seen this aggravating behavior on OS X, KDE, or Gnome shells, and I can't imagine why this behavior would be "by design." Does anyone know anything about this bug or how to get around it?

  Read the article

• Why doesn't my environment variable get set?

  - by reprogrammer

  I have to set an environment variable called GDK_NATIVE_WINDOWS to fix the problem with Eclipse buttons in Ubuntu. To set the environment variable, I added the following line to ~/.pam_environment. GDK_NATIVE_WINDOWS DEFAULT=true Surprisingly, the environment variable doesn't get set when I echo $GDK_NATIVE_WINDOWS in a terminal. However, all other environment variables that I've listed in ~/.pam_environment are set properly. Besides, when I switch to a tty, e.g. Alt+Ctrl+F1, the environment variable gets set correctly. Can anyone tell what's wrong with setting this environment variable in ~/.pam_environment?

  Read the article

• Is it possible to use the MMM tool without virtual IP capability?

  - by Artem

  We are on a host (Serverbeach) that does not support Virtual/floating IPs until you reserve at least a half-rack, which is just a little more than we are willing to spend per month right now. We do have 2 machines in one of their datacenters, and I am using these 2 machines right now in the Master-Master in Active-Passive Mode just like done by MMM -- http://mysql-mmm.org/. I have just set them up and I managing them manually, with manual switch on the Web frontend to tell it to connect to the correct (active) master. Is there any way to use MMM without virtual IPs? Any other comments on this setup?

  Read the article

• Why not all users can log in to a network computer by using <network computer name>/<user name> form

  - by Haris

  There is a file server in my office that is not connected to my office LAN. In this server there are folders that are shared. This server is connected to a switch and a wireless router. Everyone who wants to access this server uses wireless network connection. They log in to this server by providing user name and password registered to the server. Some people can log in to my office file server by providing user name in (the server name)/(user name) format, while other must use (the server IP address)/(user name) format. Why is it like this? I need everyone can access the file server by providing user name in (the server name)/(user name) format. I have tried to change the %SystemRoot%\system32\drivers\etc\hosts file, as some suggested, but it won't work. Any other suggestion?

  Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >