Search Results

Search found 22877 results on 916 pages for 'network storage'.

Page 171/916 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

  • Windows VPN always disconnects after < 3 minutes, only from my network

    - by hemp
    First, this problem has existed for almost two years. Until serverfault was born, I pretty much gave up on solving it - but now, hope is reborn! I've set up a Windows 2003 server as a domain controller and VPN server at a remote office. I am able to connect to and work over the VPN from every windows client I've tried, including XP, Vista, and Windows 7 without issue, from at least five different networks (corporate and home, domain and non.) It works fine from all of them. However, whenever I connect from clients on my home network, the connection drops (silently) after 3 minutes or less. After a short while, it will eventually tell me the connection has dropped and attempt to redial/reconnect (if I've configured the client that way.) If I reconnect, the connection will re-establish and appear to work correctly, but again will silently drop, this time after a seemingly shorter time period. These are not intermittent drops. It happens every single time, in exactly the same way. The only variable is how long the connection survives. It doesn't matter what type of traffic I send. I can sit idle, send continuous pings, RDP, transfer files, all of that at once - it makes no difference. The result is always the same. Connected for a few minutes, then silent death. Since I doubt anyone has experienced this exact situation, what steps can I take to troubleshoot my evanescing VPN?

    Read the article

  • Windows Vista/7 dropping Mac Server share points

    - by Hooligancat
    My Windows Vista and Windows 7 clients are having problems maintaining access to SMB shares on a Mac server. The initial connection to the server appears to be OK, as the Windows clients can see all of the server share points. However, the client randomly drops a couple of the server share points although the clients can still see the server. For example. If I have the following share points on the Mac server: Share A Share B Share C Share D Share E The Windows client can see these shares most of the time and can access them most of the time. But randomly a couple of the shares will just get dropped or go missing from the Windows client's ability to view them so I end up with something like: Share B Share D Share E All the share points are established int the same way with the same permission settings. My Mac OSX Server is set up with the following for SMB: SMB sharing enabled Standalone Server Workgroup of `CORPORATE` Allow Guest Access = YES Client connections limit = 100 Authentication: NTLMv2 & Kerberos and NTLM Code Page is Latin US (437) This is a workgroup master browser WINS registration is set to Enable WINS server (tried with setting off) Enable virtual share points for homes YES I noticed in my SMB file service log that the clients appear to connect OK, but I get the following error which implies a reset by either the server or the client: /SourceCache/samba/samba-187.9/samba/source/lib/util_sock.c:read_data(534) read_data: read failure for 4 bytes to client 192.168.0.99. = Connection reset by peer I am a bit stumped as to a direction to turn to try and get this to resolve. Continued attempts to access the server from the client will reconnect to the share points, but they inevitably get dropped again in the near future. Any and all help much appreciated.

    Read the article

  • ubuntu connect to server -> permantely mount?

    - by myforwik
    I have a system with Ubuntu 9.10 installed. I can connect to remote windows shares by using the "connect to server" under "places" menu. I can't figure out where these mount in the file system. And how can I get this to mount automatically on startup? And I can't install smbfs or anything else. I need to use only what comes on the live CD, as there is no internet connection and no way to get in packages.

    Read the article

  • How to host an ssh server?

    - by balki
    Hi, I have a broadband internet connection. I have an wireless modem (Airtel India). I don't have a static ip address. I want to host a ssh/web/ftp server to be visible to the outside world just for testing and learning purpose so I can ask my friend to connect to my current ip address and test. My modem has an admin interface which allows to port forward and open ports. I set up ssh server as shown and checked if port 22 is open using this website , Port Scan And port 22 is open. I have an openssh server running and it works if i do, ssh [email protected] which is my local ip address but doesn't work if i do ssh [email protected] where 122.xx.xx.xx is my external ip address of my modem which i checked from whatismyipaddress.com. Since it looks like the port is open, I wonder if there is some setting I need to change in my server config to expose my server. How should I go about solving this?

    Read the article

  • Printer Naming Conventions

    - by John
    I am working on building a new AD print server and have been pondering the idea of renaming the printers. Right now we have a mix of names that varies between a mashup of some that reference location, some that reference functional area, and some that are rather generic. Some examples include the following: Dell 5210 - Building Name HP 4350 - Functional Area Dell Color 3100 - Location and Building Number HP 6500 - Mailroom I was curious what other people used to name their printers with. What conventions do you use and how to design a method that will be able to be used for a while without needing to rename them all again. Also, the naming methodology needs to be understandable for regular computing users so that they can relatively easily find the printer that they need. I was looking at some ideas from here, but I was not sure how practical some of them are. Any help that you can provide is appreciated. Note: I have reviewed many of the postings on here in relation to server naming conventions and found that they were not specific enough for the use case I present above.

    Read the article

  • using ubuntu connect to server to mount windows share

    - by myforwik
    I have a system with Ubuntu 9.10 installed. I can connect to remote windows shares by using the "connect to server" under "places" menu. I can't figure out where these mount in the file system. Is it possible to mount it in the file system. And I can't install smbfs or anything else. I need to use only what comes on the live CD, as there is no internet connection and no way to get in packages.

    Read the article

  • How to share my localhost over the internet?

    - by Loolooii
    I really want to share my localhost over the internet to show my friends the progress of the website we're working on, so that I don't need to upload it to the public server each time I make a change. showoff.io is not free and localtunnel gives me "failed to authenticate" when trying to upload my public key (a lot of people seem to have this problem and there doesn't seem to be a solution for this). Does anyone know any other free service I can use or any other solution at all? I'm using a Mac. Thanks. UPDATE: with localhost I mean a web server running on my computer, I have a dynamic IP address and no I'm not behind a router (just using a wireless modem).

    Read the article

  • users connecting to remote desktop to use software

    - by Jordan
    Im an IT assistant at a CNC milling company and we use a program called made2manage. Its an ERP (enterprise resource management) software. Each license is something like 5k and instead of giving each employee there own copy of the software he has everyone that uses the program connect to a server that has a copy of m2m on it. Its slow when there are a bunch of people connected to it. But I guess they dont want to buy more licenses. Is there a better way to do something like this? How bad of a practice is this?

    Read the article

  • Cisco 1242 WAP Bridging

    - by DanWake
    I'm looking to connect two facilities with a a pair of Cisco 1242 access points and am looking for advice on configuration. We have multiple VLANs running that will need to be passed through the connection, but otherwise a fairly simple setup. Any advice on best practices from security, reliability, and speed points of views?

    Read the article

  • Apache mod_proxy, how to forward request into local network ip(server)

    - by Beck
    Can't figure out, how to configure mod_proxy for this. I have two domains, one is working fine at the moment. Second is bind to the same ip. I need to forward requests from second domain to another server in local network. like that: domain1.com => 192.168.1.101 domain2.com => 192.168.1.102 What configuration or directives i should use? Thanks ;) Update <VirtualHost *:80> ServerName www.domain2.com ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://192.168.1.103:8080/ ProxyPassReverse / http://192.168.1.103:8080/ </VirtualHost> It just doesn't redirect to second server. That's it. And when i restart apache, it says something with overlapping 80 port. [warn] _default_ VirtualHost overlap on port 80, the first has precedence

    Read the article

  • Juniper NetScreen NS-5GT traffic monitoring

    - by blah
    I've done casual research into the subject and am truly dismayed at the lack of compatible tools for such a simple task. Maybe someone can provide assistance. We have a NetScreen NS-5GT in the office. I need to be able to get a glance of current traffic per endpoint -- I think the equivalent of 'get sessions' with byte counts/rates. I don't care about bars, graphs, and reports. Something as simple as a classic software firewall display would be perfect. I can't shell out money on something real like SolarWinds products, so a free solution is essential. I'm willing to do a little work but refuse to program something from scratch. It's not prudent right now for me to install a hub or otherwise mess around physically. There must be something out there I can use, maybe in combination. I don't believe I'm asking too much. Specific answers only please, e.g. monitoring software you know will actually work with this antiquated device. I've read about general approaches to the broader problem dozens of times already.

    Read the article

  • How can I troubleshoot SSD disconnection problems on Windows 7?

    - by 0xC0000022L
    I have a small SSD (Transcend StoreJet TS256GESD200K) which I am using on several computers. The drive is formatted with NTFS and recently I started noticing disconnects. Normally one probably wouldn't notice (you don't even get the notification sound in Windows when it disconnects), but since I use USBDLM and run a VM from that SSD, I get to see this first-hand. How could I best figure out whether the problem is the hardware (SSD, USB socket, USB cable or something in the PC) or software? In short: how can I locate the source of the disruption so that I can work on removing the problem? Side-note: SMART status for the SSD is clean.

    Read the article

  • Can I use a desktop as a network server?

    - by Jhourlad Estrella
    Pardon me if I'm asking the wrong question. But I am a newbie in networking and I'm not sure what direction to go on this. I have just setup an Ubuntu Desktop. I am planning to convert it to a network server without losing the GUI interface (again, I'm a newbie) and use it to manage and monitor user access to a network with a small number of network terminals all running on Windows. My purpose is to use the new server to filter sites accessed by each terminals, monitor sites being visited by employees and grant access to both group and user-specific folders based on their IP address. Is this possible? What server software do I need to install? How do I structure the hardware? (I have a router, a hub, the Ubuntu server and the network terminals) How do I assign privileges to users and monitor them at the same time? Thank you in advance for your replies.

    Read the article

  • Unable to connect via NetBIOS Name

    - by grom
    I can't connect to machines/shares by NetBIOS names. Below is console output showing the problem. C:\>nbtstat -n Local Area Connection: Node IpAddress: [192.168.1.100] Scope Id: [] NetBIOS Local Name Table Name Type Status --------------------------------------------- BEAST <00> UNIQUE Registered WORKGROUP <00> GROUP Registered BEAST <20> UNIQUE Registered WORKGROUP <1E> GROUP Registered WORKGROUP <1D> UNIQUE Registered ..__MSBROWSE__.<01> GROUP Registered C:\>nbtstat -A 192.168.1.3 Local Area Connection: Node IpAddress: [192.168.1.100] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- BRCLAPTOP <00> UNIQUE Registered WORKGROUP <00> GROUP Registered BRCLAPTOP <20> UNIQUE Registered WORKGROUP <1E> GROUP Registered MAC Address = 00-1C-BF-14-B8-6E C:\>ping beast Pinging beast [fe80::59b8:179f:b90b:a63f%11] with 32 bytes of data: Reply from fe80::59b8:179f:b90b:a63f%11: time<1ms Reply from fe80::59b8:179f:b90b:a63f%11: time<1ms Reply from fe80::59b8:179f:b90b:a63f%11: time<1ms Reply from fe80::59b8:179f:b90b:a63f%11: time<1ms Ping statistics for fe80::59b8:179f:b90b:a63f%11: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\>ping brclaptop Ping request could not find host brclaptop. Please check the name and try again. C:\>nbtstat -a brclaptop Local Area Connection: Node IpAddress: [192.168.1.100] Scope Id: [] Host not found.

    Read the article

  • Is it safe to use consumer MLC SSDs in a server?

    - by Zypher
    We (and by we I mean Jeff) are looking into the possibility of using Consumer MLC SSD disks in our backup data center. We want to try to keep costs down and usable space up - so the Intel X25-E's are pretty much out at about 700$ each and 64GB of capacity. What we are thinking of doing is to buy some of the lower end SSD's that offer more capacity at a lower price point. My boss doesn't think spending about 5k for disks in servers running out of the backup data center is worth the investment. Just how dangerous of an approach is this and what can be done to mitigate these dangers?

    Read the article

  • RouterLess, house-wired network using multiple powerline adapters

    - by Cliff Arnell
    related to the 'old days' of one ethernet cable tapped with Ts for each monitor.... my question might be very simple... or not. I have an over-the-air internet provider with a wire dish with a powered transceiver and cat5 cable out of the providers supplied modem. I'm presently connecting the output of the modem into my wireless router which sends the internet signal all over the house. Standard stuff, I believe. My Question. Can I just connect the output of the modem into 1 powerline adapter and tie all my equipment such as computer, printer, laptop, Tivo recorder, etc. into 1-each local powerline adapters located near each devices resulting in a 'house-wired' network and no router? I'm bothered by the idea that my over-the-air provider might be using something in my router to establish and keep my IP connection alive. I did have to configure the router for my IP, a router which, in my proposed scenario, would no longer exist. Thank you for your help.

    Read the article

  • How to monitor bandwidth use of each device on wifi network

    - by GWLlosa
    I have in my home a standard Comcast cable internet connection. I have it going from the wall to a cable modem, and from the modem to a late-series Linksys router, which provides wired and wireless networking. The vast majority of the users are wireless connections. For day-to-day tasks, this connection is fully sufficient for all my needs. However, on regular occassions, we have social gatherings that involve many people bringing laptops and other PCs and using the network and internet simultaneously, frequently for gaming. I have no administrative oversight over these machines; they have been known to be riddled with spyware and/or bloatware or be running torrents, legal or otherwise. The only reason I care is that on a regular basis, one of the machines will flatline my internet bandwith, and consume it all in order to upload/download/spam people/whatever. When this happens, the latency of the connections for gaming and the like becomes unacceptable, and everyone suffers. My question is: Is there a system I can set up whereby I can easily monitor the various systems connected to my wireless connection, see how much bandwith each one is using, and for what ends? That way, at a glance, I can spot the offending machine and kick it from the connection, without having to go from machine to machine, checking each one's "bandwith used" properties manually, and dealing with the owner's indignant protests all the while. I understand this will likely involve 3rd-party software and/or hardware; my issue is I don't even know where to begin.

    Read the article

  • port forwarding/network settings preventing from game hosting

    - by Xitcod13
    I asked where to post this question on stackoverflow meta and they directed me here. Im on wireless connection and I want to host games in StarCraft: Brood War and i've been looking everywhere on how to accomplish that. My internet is amazingly fast so its not an internet problem (and when i play other peoples games dont experience lag) I found out that i need to have a static IP but I have already checked that i do (i downloaded a program to make my id static and it already was; The program asked for which router I used So i think it checked the router settings already) I found out that i need to allow Sc access through the firewall which i already did (i have zone-alarm but I allowed it everything possible except receiving emails lol) I have recently noticed that few people actually can join my games but most of them cannot. I dont know whats going on here. I really want to be able to host games overall how do I go about checking what is wrong with the network. Update: Alright I figured out what i did wrong in the first part I did not actually set up forwarding on the router -.- I have tried to fix my mistake. I went to forwarding options in my router (as this guide for my specific router suggests) but when i click ok I get a message incorrect ip address. 192.168.1.1 is my routers address. The default address that appears there is 192.168.1 (blank) I have set it to my computers current Ip4 adress which 192.168.1.23 I hope this works If so i will post it as an answer and mark it.

    Read the article

  • hardware: delay and distinct 'click' before hard drive access

    - by matt lohkamp
    I have a windows 7 box stashed away in my closet, containing (among other things) 2 big HDDs linked together as a mirrored volume - basically a super lazy NAS / media server. I've noticed that when that drive is accessed (whether locally, on the machine itself, or remotely, from another computer, or my xbox, for example) there's a noticeable pause, and then from the computer itself, a 'click!' noise, after which the drive is accessed; e.g. open \\computername\shared\, wait 2 seconds, hear 'click!' and then see files appear in windows explorer. Any ideas? Otherwise the drive preforms normally - is it a windows thing? a HDD-about-to-die thing? Or a "yeah that always happens, you've just never noticed it before" thing?

    Read the article

  • windows xp command prompt remote

    - by user19810
    I was wondering if it was possible to have remote access to a command prompt on a windows xp machine, like using remote desktop services, only with the command prompt. I'm programming a java application, and having a full remote desktop service is a kind of a system hog. Also, the system I am using to access windows remotely is ubuntu. Thanks.

    Read the article

  • Have to reset wireless frequently on iPad / Macs connected to Cisco WRV200

    - by retailevolved
    I have a Cisco WRV200 set up in our small office. The wireless signal works great for PCs, but I have found that Macs and iPads have to frequently reset the connection. It will be working for about 10 minutes, then stop. To fix it, I just turn off Airport and turn it on again. On an iPad, I have to go into settings, shut the wireless off, and then turn it on again. The router is broadcasting mixed B/G on channel 6. Security is WPA-PSK2. Anybody out there had similar issues with their router? How can I fix it?

    Read the article

  • Why does a Remote Desktop Redirected Printer Doc appear every time I connect to Windows Server 2003 SBS?

    - by Jim Dagg
    I've run into a weird, persistent issue regarding a remote desktop connection. Every time I successfully log into a server running Windows Server 2003 SBS, without taking any further action, after a few seconds a print job spontaneously appears on my machine, titled "Remote Desktop Redirected Printer Doc". The document is 4K, datatype RAW, processor "WinPrint". I've heard of people running into this issue before, but can't seem to hunt down a coherent solution. It's a minor annoyance, but I get annoyed when Windows complains about a print job that, as far as I know, came from nowhere. Any thoughts on why this would occur and how I could prevent it from happening?

    Read the article

  • Very Slow DSL (ethernet) speed [New Interesting Update]

    - by Abhijit
    Very IMPORTANT and INTERESTING UPDATE: Due to some reason I just thought to do a complete new setup and this time I decided to again have openSUSE plus ubuntu. So I first reinstall lubuntu and then I installed OpenSUSE 12.2 (64 bit). Now, my DSL speed is working very normal and fine on opensuse. So this is very scary. Is it possible for any operating system to manipulate my NIC so that it will work fine only on that operating system and not on another os? Regarding positive thinking and not being paranoid, what is it that makes ONLY suse to get my NIC to work at normal speed but ubuntu can not do it? Not even fedora? Not even linux mint? What all these OS are lacking that enables suse to work great? == ORIGINAL QUESTION == I 'was' on opensuse 12.2 when my dsl speed was normal. Yesterday I switched from opensuse to ubuntu 12.04 and speed decreased. It came to range of 7-10-13-20-25-kbps. Then I switch to linux mint, and then to fedora. Still slow speed. When I was in ubuntu I disabled ipv6 but still no luck. Now I am in fedora but this time with DIFFERENT ISP. And still I am getting very slow sped. So my guess is this is nothing to do with os. What can be wrong? Is this problem of NIC? Does NIC speed decreases over time? Does NIC life ends over time as with keyboard or mouse? Help please All the os I used are 64 bit and my laptop is Compaq Presario A965Tu Intel Centrino DUal Core. Interesting thing to notice is I get normal speed while downloading torrent inside torrent client softwares. This slow speed issue applied to download from any web browser or installing software using terminal.

    Read the article

  • Transfer Raid Drives to External Enclosure

    - by dubbeat
    I have 2 raid disks (a grand total of 360GB) in my laptop. I'm fast running out of space and want to install new drives. I've a pretty good idea how to do this. My question is what can I do with the drives that I remove? I've got lots of media files on these drives that I'd like to keep and maybe transfer back onto my laptop once I have the new drives installed. Bearing in mind that I know next to nothing about hardware how do you suggegst I go about reusing the removed drives somehow? Thanks,

    Read the article

  • Sharing internet through a wireless ad-hoc in Windows 7

    - by vzait
    I'm actually requesting a workaround to share a PPoE wired Internet connection between two laptops using wireless. I've tried sharing it the usual way... New Ad-hoc = Click turn On sharing = etc. I've tried changing all the settings I could find related to the two networks on both machines. Conclusion: Sometimes it works, sometimes it doesn't. Is it really buggy, or are my hands growing from the wrong place? I'm almost sure I'm not the only one having this kind of problem. What is the easiest/correct workaround ?

    Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >