Search Results

Search found 4670 results on 187 pages for 'osx jedi'.

Page 171/187 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

• wireshark not seeing all packets on WiFi

  - by Caffeine Coma

  I'm using Wireshark on OSX, trying to sniff my home network over WiFi. While I can see packets that are sent to/from the host I'm sniffing on, I'm not seeing anything else that goes over the WiFi. It's like I'm not in promiscuous mode or something (the promiscuous mode box is in fact checked). The router is an Apple Airport Extreme, protected by WPA2. I'm attached to the network I'm trying to sniff, so I'm confused about why I can't see other traffic. Edit: I solved this by the following: Plug Macbook directly into the Airport Extreme router Enable "internet sharing" on Macbook, with no password. Bind wireless device (the one I wanted to sniff) to the WiFi hotspot generated by Internet sharing in step 2. Run Wireshark on the Macbook, bound to device en1. Don't forget to disable sharing after you're done. :-)

  Read the article

• Longlasting Macport installation

  - by user10826

  Hi, I use Macports on Mac OSX to install some software. But there are somethings that I find very strange. For instance, yesterday I installed some app. and the it needed to get gcc43 and compile completely from source! It took a lot of time, although now everything works right. I understand that compilation of everything in the gentoo spirit is eomthing nice, but in the Mac case, not necessary. There are ony sole hardware variations, so it will be easier to get the binaries. I wonder if Macporst can be forced to get the binaries when available and therefore avoid these time consuming compilations. Thanks

  Read the article

• How can I port forward with an airport extreme and a NAT enabled modem?

  - by Jon

  I run an Actiontec HD701D modem with NAT to an Airport extreme base station to laptop etc. As you might expect I get double NAT issues. I tried a lot of different things to forward a port, but no luck. Currently the airport is in bridge mode letting the modem handle the NAT, but still can't forward the port. Also to note: firewall is off on the router, firewall is set to allow the application in OSX 10.6.3 and I did forward the port in the router. No luck.

  Read the article

• How do you map a solo press of a modifier key to its own function or mapping on Windows?

  - by Conrad.Dean

  Today on hacker news there was a clever article on custom shortcut keys. The author talks about a technique for remapping a modifier key such as CTRL to ESC if CTRL were pressed without a modifier. This is useful in vim because of how often you need to press ESC. Another technique he describes is mapping the open parenthesis, ( to the left shift key, and ) to the right shift key. If another key is pressed when shift is held down, the shift key behaves normally. The author describes the software he uses on OSX, but is there a way to do this on Windows? I've heard of AutoHotKey but it seems to only fire macros when simple keys are pressed, rather than the conditional state switch that this would require.

  Read the article

• Trouble typing accented letters at the terminal prompt after launching Python

  - by Nicojo

  Edit: Using Mac OSX 10.6, whether I use Terminal.app or iTerm.app, when I launch Python, I can no longer type accented letters (e.g.é or ä). Any ideas? ORIGINAL POST: I am using iTerm 0.10. I would like to type in a string with accented characters (e.g. é) but when I do so at the iTerm prompt, no character appears. This does not occur in Terminal. Could someone help me find out what the problem is, and eventually fix it? EDIT: In Terminal.app, I can use accented characters. However, when I launch the Python 2.71 prompt, I can no longer type in accented characters. When I quit python and return to the terminal prompt, I can again type accented characters. In iTerm, although I quit Python and restarted iTerm, I cannot type in accented characters (I do not know if I could before).

  Read the article

• How can I force Firefox to select the tab to the right on tab close?

  - by Philip

  I'm using TMP 0.3.8.2 and a host of other extensions on FF 3.6.3 on OSX 10.6. I've tried disabling all other extensions that might interfere with tab settings but it's hard to keep track of everything because I have literally 60 (about 30 are disabled though) that are on and off in various configurations. I'm wondering if there's a way to FORCE Firefox to select the tab to the right on closing a tab, in such a way that it overrides any other setting anywhere else. I realize the prospects for this are dim. Thanks.

  Read the article

• Debian: Firefox or Iceweasel default printer for POS station

  - by Bubnoff

  Context Using Debian 6.04 "Squeeze" as POS station. There are two printers installed: Network printer and a receipt printer It absolutely must be able to print by default to the receipt printer on a certain website though the system default is a network printer. In Debian ...it doesn't. Problem I've set up XP, 7, Ubuntu and even Mac OSX this way, so I'm no stranger to setting Firefox up this way ...same Iceweasel/Firefox settings ...complete fail. Always uses system default no matter what the settings, or, which printer you print from. To get this to work on other systems you do this: Print a page in Firefox using desired printer. Ensure print.save_settings is true. Firefox remembers last printer used Set print.always_print_silent = true The end. This works on every OS I've set up ....except Firefox and Iceweasel in Debian. My only recourse seems to be to set the receipt printer as default or go back to bloaty Ubuntu/Mint ...etc.

  Read the article

• Apple file sharing: bind to a specific interface

  - by Cesar

  My customer have an office small office with just a wifi router. He use this router for internet connectivity and file transfer operations between the desktops. Recently the file transfer activity between desktop (all osx based) is increased a lot so he bought a switch (no connected to the router, too far away) for transfer the file over the cable instead over the wifi. Problem: How to bind the file sharing service just to the Ethernet interface and exclude the wifi interface ? (actually the service binds to the wifi automatically and there are no options about the interface binding)

  Read the article

• Access my mac's local server from a windows machine

  - by Simon Davies

  I am running my test sites on my mac, but I would like be able to use my windows machine to also access this server and be able to write / read fiels form this server. I can access my sites on my windows by using the IP address 192.168.1.???. But I would like to be able to use my windows machine to also access the fiels and edit them. Any ideas much appreciated. Some details: Mac OSX SL file sharing set to on. Windows 7 (tried setting up network map using afp://192.... but nothing) Both machines are connected to a local network, with several other machine (windows) Thanks

  Read the article

• Apple Software Update Server for Windows

  - by Matthew Iselin

  We have just added a few iMacs to our system and we've found that they all want to download about 1.6 GB of updates... not so great when we only have limited monthly bandwidth! All of our Windows machines just use WSUS, which works great in our environment. It'd be nice if we could do the same for the iMacs without purchasing an additional Mac for a server role. So is it possible to run Apple's Software Update Server on a Windows server? Or do we need to look at purchasing a Mac in order to distribute updates across our clients? Alternatively, could we set up one of the iMacs to run the update server for the other iMacs whilst it is being used as a standard machine (ie, not installing OSX server, and keeping it available for staff to use)?

  Read the article

• Unreasonably slow stunnel

  - by Kit Sunde

  I setup stunnel on OSX to tunnel traffic to my Django dev server because Facebook needs HTTPS these days but I noticed it's being absurdly slow. It seems like it can only handle a single connection at a time and even the connection is slow when I'm connecting to localhost. I've tried using some performance tips found online and so my config is setup as: pid= # foreground=yes cert=./cacert.pem key=./privkey.pem libwrap=no debug=0 socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 [https] accept=8443 connect=8000 Is there a way to get more performance or more suitable way of setting up HTTPS for my dev server?

  Read the article

• rails didnt install correclty, specificly the uninstaller

  - by sam

  ive just installed rails using railsinstaller.org for osx, rails and ruby seem to be working ok (checked by running rails -v and ruby --version). But when it installed i got an error saying that not there were errors and the uninstaller didnt install correctly. Somthing odd i saw was that when i load terminal i get this showing up Last login: Fri Nov 30 13:12:09 on ttys000 unknown5c969d7cc475:~ Sam$ specificly the "unknon5c96..." part im not sure if its related ? I think i might have got the install error as xcode wasnt installed first, for peice of mind id like to unistall it and load it back on, but when i try and run the installer from the application folder it just asks for my password and then dose nothing.. any ideas how i can fix this ?

  Read the article

• Cheap, light, small Skype laptop?

  - by roufamatic

  My wife and son are heading out while I stay home to babysit some contractors. We discussed getting her a small, cheap laptop that would primarily be used for Skype. Good quality integrated video & mike are prerequisites, as is Windows (though I'd entertain OSX). Doesn't need to be large, a 12" screen is probably fine. If I went new, where should I look? And if I were going to test the used/craigslist waters, what specs are we talking about?

  Read the article

• Dial-in VPN Routing issue when on 192.168.x.x network range

  - by Ian

  I'm not an expert on networks but have a small office on the 192.168.x.x. range which is managed by a vigor (2800) router. I have enabled the VPN dial-in option on the router so I can get to the server on 192.168.1.100 which works fine from my macbook when i'm NOT on a local network with that is on the 192.168.x.x range. e.g. works fine when I tether over my Android smartphone but when I try & connect when on my home network, it connects, I can access the router (192.168.1.1) but cannot access 192.168.1.100 - traceroute doesn't hop via 192.168.1.1 I have enabled "send all traffic over VPN connection but again, not joy... Feels like the osx platform isn't routing the traffic out to the vpn endpoint as the destination address is on the local subnet but expect it would be. This work fine on a windows PC on the same home network. Any thoughts on what the issue could be?

  Read the article

• Mount encrypted hfs in ubuntu

  - by pagid

  I try to mount an encrypted hfs+ partition in ubuntu. An older post described quite good how to do it, but lacks the information how to use encrypted partitions. What I found so far is: # install required packages sudo apt-get install hfsprogs hfsutils hfsplus loop-aes-utils # try to mount it mount -t hfsplus -o encryption=aes-256 /dev/xyz /mount/xyz But once I run this I get the following error: Error: Password must be at least 20 characters. So I tried to type it in twice, but that results in this: ioctl: LOOP_SET_STATUS: Invalid argument, requested cipher or key (256 bits) not supported by kernel Any suggestions? Thx Edit: One thing I'm not sure about is whether I use the right password. My assumption is that it is my default one for these situations. But I'm not sure whether Max OSX choose another password (internally) for that.

  Read the article

• Accessing WindowsXP shared printer from macbook?

  - by mobibob

  My new printer is setup on WindowsXP, it works and it is configured as a shared printer. I then setup a printer from Mac OSX 10.6.3 using the approved driver from the setup CD. I browsed for the printer via the network. When I send a test page, it queues, but never prints. Its as if the driver thinks the printer is local to the mac and just never finishes printing. THe configuration shows as: smb://dragoneye/CanonMP2 Where dragoneye is the name of the Windows XP server and the CanonMP2 is the little multi-purpose printer. My other Windows' CPU can setup and print. Is this a known problem or am I missing a setting??

  Read the article

• Update server version for postgres 9.1.2

  - by Nai

  I'm trying to run a postgis sql script and I'm running into the following error. Am I correct to say that updating my server version will fix it? If so, how can I go about updating it? I'm on Mac OSX Lion and installed Postgres via brew. Apparently I have an older version installed which is 9.1.2 but installing postgis installed postgres 9.2.1 on to my system. How can I point my postgres server to the new one? nai@nyc /usr/local/share/postgis (git::master) $ psql -d template_postgis -f postgis.sql SET BEGIN psql:postgis.sql:49: ERROR: incompatible library "/usr/local/Cellar/postgresql/9.2.1/lib/postgis-2.0.so": version mismatch DETAIL: Server is version 9.1, library is version 9.2. nai@nyc /usr/local/share/postgis (git::master) $ psql psql (9.2.1, server 9.1.2) WARNING: psql version 9.2, server version 9.1. Some psql features might not work.

  Read the article

• VPN is working, except for DNS lookups. Firewall (Cisco ASA 5505) issue?

  - by macke

  I've got the following set up: LAN -> DHCP / DNS / VPN server (OSX 10.6) -> Cisco ASA 5505 -> WAN Connecting to the LAN via VPN works fine. I get all the details properly and I can ping any host on the internal network using their IP. However, I can't do any host lookups whatsoever. I've looked through the logs on and found this nugget in the firewall log: 3 Sep 08 2010 10:46:40 305006 10.0.0.197 65371 portmap translation creation failed for udp src inside:myhostname.local/53 dst inside:10.0.0.197/65371 Port 53 is dns services, no? Because of that log entry, I'm thinking that the issue is with the firewall, not the server. Any ideas? Please keep in mind that I have very little knowledge and experience with this kind of firewall and the little experience I do have is with the ASDM GUI console, not the CLI console.

  Read the article

• Installed Java 7, but terminal still shows Java 6

  - by chipbk10

  I've installed Java 7 on my Mac (10.7.5), but in the terminal there is still java 6. java version "1.6.0_37" Java(TM) SE Runtime Environment (build 1.6.0_37-b06-434-11M3909) Java HotSpot(TM) 64-Bit Server VM (build 20.12-b01-434, mixed mode) There will be no problem with the version 6 on terminal, if I always got that errors when I tried to install a java application (LatexDraw): : CGContextGetCTM: invalid context 0x0 : CGContextSetBaseCTM: invalid context 0x0 : CGContextGetCTM: invalid context 0x0 : CGContextSetBaseCTM: invalid context 0x0 The problem is related to instability of java 6 inferred from this link I've read this installed-java-7-on-mac-osx-but-terminal-is-still-using-version-6 and also try to change my Java version by using export JAVA_HOME="/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home", but in my folder /System/Library/Frameworks/JavaVM.framework/Versions, there is no version 1.7, only versions under 1.6 ??? So, how can I fix this issue?

  Read the article

• Writing to external drive runs out of space prematurely

  - by steve

  I have a USB 2.0, 500 GB HDD. I am writing a bunch of data to it, that I previously recovered from the drive. I have formatted the drive in exFAT, since the drive will be used with Windows and OSX. At first, I tried using Windows explorer to move the files over to the drive (about 160 GiB worth) but after copying about 30% of the data (according to TeraCopy), Windows Explorer reported the drive as out of space, and that it was completely full. WinDirStat only showed the size of data that had been copied over... Where did this extra space go? Why is there a 300+ GiB discrepancy between the usage reported by the files and what Explorer sees?

  Read the article

• frequent errors with subversion repository on fat32 on USB memory stick

  - by sal

  I keep a copy of a Subversion Repository on a USB memory stick that is formatted with FAT32. I am using TortoiseSVN on XP and command line svn 1.6.x on Ubuntu and OSX with this memory stick. I notice that I need to do an svn cleanup just about every time or updates and commits will not work. I routinely have errors with .lock and *.svn/text-base/** files getting corrupted. Errors tend to be parameter is incorrect or lock file can not be read Sometimes svn cleanup works and sometimes chflags -R nouchg * Is there anything I can do to prevent this?

  Read the article

• How can I update Firefox add-ons automatically?

  - by Maelstrom

  Similar to this question, is it possible to update installed plugins via the command line? I'm running YSlow with beacon reporting as a nightly cron job under OSX: /Applications/Firefox.app/Contents/MacOS/firefox-bin -no-remote -P YSlow http://www.example.com/ & PID=$! sleep 300 kill $PID This dumps FF into the background and grabs the PID, waits 300 seconds (for the page to load) then kills it. If there is an update pending, the browser "hangs" waiting for a confirmation. If I do click on the "install updates" link, everything works and then Firefox launches a new process - the $! returned by the shell is no longer valid. Can I update a plugin from the command line without confirmation? Can I curl the XPI into a file and install it without confirmation?

  Read the article

• Alternatives to Citrix GoToAssist ?

  - by Evan Carroll

  Citrix GoToAssist is a really nifty little web application for customer support that allows you to take control of someones OSX, or Windows machine. Essentially, it works likes this: You log in to your management console You get a code You give them a code, and a website (fastsupport.com) They go there and enter in the code They accept the browser applet which installs a program on their computer You have control of their desktop You can see their desktop, configure applications, etc. They can also see when you disconnect. It is really rather nifty, but it doesn't support Linux and it is rather expensive (660$ a year). Does anyone know of any alternatives to this? I'm looking for a solution as simple on the user as this one, that doesn't require firewall configuration or setting up ssh/vnc/rdesktop etc.

  Read the article

• Feedback on available mid-to-enterprise level desktop backup solutions [closed]

  - by user85610

  I am involved in the creation of a new backup solution to replace our current Retrospect setup, which has become a significant time sink to administer. We have almost 200 desktop and some laptop clients, both Windows and OS X. We're only interested in products oriented around disk-to-disk, and would be integrate well with our current set of nine NAS devices as target storage. I'd just like some feedback from anyone out there, as it's sometimes difficult otherwise to find objective reviews of software at this level. Both data and time are important enough that we need a reliable solution which won't be prone to self-destruction as often as Retrospect. Bonus points for de-duplication, which might help squeeze more service time out of our NAS setup in terms of capacity. Currently considering Commvault and Netbackup. Many other products I've seen don't have an OSX client. Any thoughts?

  Read the article

• VPN connects but my browsers and messenger don't connect

  - by elizabeth chubbuck

  I have no problem VPN into work. As of last night, everything worked fine. But as of this A.M., none of my browsers connect and Microsoft Messenger will not connect. I did nothing, but had a pending a OSX update. I rebooted.. Still no internet. All network connections working, clearly, since VPN works. Its how I am doing this post now, is via VPN and remote desktopping to work computer. This just showed up as of this morning not working. I renewed DHCP, etc.. but cannot ping anywhere.

  Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >