Search Results

Search found 4460 results on 179 pages for 'ssrs reports'.

Page 171/179 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

• How to overcome shortcomings in reporting from EAV database?

  - by David Archer

  The major shortcomings with Entity-Attribute-Value database designs in SQL all seem to be related to being able to query and report on the data efficiently and quickly. Most of the information I read on the subject warn against implementing EAV due to these problems and the commonality of querying/reporting for almost all applications. I am currently designing a system where almost all the fields necessary for data storage are not known at design/compile time and are defined by the end-user of the system. EAV seems like a good fit for this requirement but due to the problems I've read about, I am hesitant in implementing it as there are also some pretty heavy reporting requirements for this system as well. I think I've come up with a way around this but would like to pose the question to the SO community. Given that typical normalized database (OLTP) still isn't always the best option for running reports, a good practice seems to be having a "reporting" database (OLAP) where the data from the normalized database is copied to, indexed extensively, and possibly denormalized for easier querying. Could the same idea be used to work around the shortcomings of an EAV design? The main downside I see are the increased complexity of transferring the data from the EAV database to reporting as you may end up having to alter the tables in the reporting database as new fields are defined in the EAV database. But that is hardly impossible and seems to be an acceptable tradeoff for the increased flexibility given by the EAV design. This downside also exists if I use a non-SQL data store (i.e. CouchDB or similar) for the main data storage since all the standard reporting tools are expecting a SQL backend to query against. Do the issues with EAV systems mostly go away if you have a seperate reporting database for querying? EDIT: Thanks for the comments so far. One of the important things about the system I'm working on it that I'm really only talking about using EAV for one of the entities, not everything in the system. The whole gist of the system is to be able to pull data from multiple disparate sources that are not known ahead of time and crunch the data to come up with some "best known" data about a particular entity. So every "field" I'm dealing with is multi-valued and I'm also required to track history for each. The normalized design for this ends up being 1 table per field which makes querying it kind of painful anyway. Here are the table schemas and sample data I'm looking at (obviously changed from what I'm working on but I think it illustrates the point well): EAV Tables Person ------------------- - Id - Name - ------------------- - 123 - Joe Smith - ------------------- Person_Value ------------------------------------------------------------------- - PersonId - Source - Field - Value - EffectiveDate - ------------------------------------------------------------------- - 123 - CIA - HomeAddress - 123 Cherry Ln - 2010-03-26 - - 123 - DMV - HomeAddress - 561 Stoney Rd - 2010-02-15 - - 123 - FBI - HomeAddress - 676 Lancas Dr - 2010-03-01 - ------------------------------------------------------------------- Reporting Table Person_Denormalized ---------------------------------------------------------------------------------------- - Id - Name - HomeAddress - HomeAddress_Confidence - HomeAddress_EffectiveDate - ---------------------------------------------------------------------------------------- - 123 - Joe Smith - 123 Cherry Ln - 0.713 - 2010-03-26 - ---------------------------------------------------------------------------------------- Normalized Design Person ------------------- - Id - Name - ------------------- - 123 - Joe Smith - ------------------- Person_HomeAddress ------------------------------------------------------ - PersonId - Source - Value - Effective Date - ------------------------------------------------------ - 123 - CIA - 123 Cherry Ln - 2010-03-26 - - 123 - DMV - 561 Stoney Rd - 2010-02-15 - - 123 - FBI - 676 Lancas Dr - 2010-03-01 - ------------------------------------------------------ The "Confidence" field here is generated using logic that cannot be expressed easily (if at all) using SQL so my most common operation besides inserting new values will be pulling ALL data about a person for all fields so I can generate the record for the reporting table. This is actually easier in the EAV model as I can do a single query. In the normalized design, I end up having to do 1 query per field to avoid a massive cartesian product from joining them all together.

  Read the article

• Java 7 update 6 installation fails on Windows 7 when Chrome is default browser

  - by ali1234

  I am configuring a brand new Lenovo U410 system with Windows 7 Home Premium for a user. I received the system direct from the shop. As part of the configuration I installed Java using the online installer. This worked correctly. Later, due to a mistake I made, I needed to restore the system to factory default. The factory default FORMATS C:\ and puts back (supposedly) the exact factory configuration. However, after doing this, I was no longer able to install Java successfully using the same method I used before. Now, whenever I attempt to use the online Java installer, the following happens. First of all, a window always appears "Welcome to Java", "Downloading Java Installer...". After short time this window disappears and then one of three things happens: The very first time I do this after doing a factory reset, I get a Windows error report, which contains this information: Application Name: JavaSetup7u5.exe Application Version: 7.0.50.6 Application Timestamp: 4feacd84 Fault Module Name: JavaIC.dll Fault Module Version: 9.9.9.9 Fault Module Timestamp: 4f2343d6 Exception Offset: 000052cb Exception Code: c0000417 Exception Data: 00000000 OS Version: 6.1.7600.2.0.0.768.3 Locale ID: 1033 Additional Information 1: 773c Additional Information 2: 773cd78cf06816f8246f359fa270f3bb Additional Information 3: f51a Additional Information 4: f51aaea7d22f36fa9e3a626b5a5cd1c3 2. Subsequent runs produce either this error message: "Error: Java(TM) installer - Downloaded file C:\Users\\AppData\Local\Temp\fx-runtime.exe is corrupt." or Nothing happens at all. I Believe this is a red herring. Running the installer again causes a different error because the files were downloaded and the installer crashed before it could clean up. This isn't the actual problem, as when this happens the installer deletes the downloaded files, and then when you run it for the third time, it downloads everything again and does the javaic.dll crash. I suspect the downloader is appending to the existing files or something, causing the corruption. I have tried all of the above as Administrator and as a normal user. I have tried reseting the system to factory defaults several times. I have tried downloading with Chrome and Internet Explorer 9. I have tried uninstalling all anti-virus software and disabling the windows firewall entirely. The only thing which makes a difference is running the installer in Windows XP compatibility mode, which allows the installation to complete. I know I can workaround this error by using the offline installer so please don't post that as an answer. I am looking for an explanation of the root cause. Additionally, if I use the offline installer, the updater does not work. The updater also does not work if I install in XP mode. The updater fails because it works by just downloading the newest online setup and running it. Also remember that the installers are digitally signed. The signitures verify correctly so there is no way in hell that this is caused by corrupted downloads. Some theories I have: The Java setup files on java.com actually changed in between the first successful install and my later attempts. Seems unlikely as none of the version numbers have changed. However, I have seen a couple of reports of this error which showed up in the past 24 hours. This looks like the most likely explanation right now: http://www.oracle.com/us/corporate/press/1735645 - Oracle released 7 update 6 two days ago. Careful inspection of the installers reveal that they are in fact attempting to download .6, not .5 as the download page claims. Not actually correct. Only the update tool tries to install 7u6. The online installer still tries 7u5. However, 7u6 being released two days ago is too much of a coincidence to ignore. Update: The 7u6 online installer is available from Oracle technetwork. It crashes in exactly the same way. The factory reset software uses GMT-8 and I am on GMT-1. As a result, after factory reset, any software which cares to check would think that the system was restored 7 hours in the future, due to Window's awful policy of storing local time in the system clock. This could be confusing a certificate check or similar. Update: I discovered that this does cause Windows Update to fail. The workaround, setting the clock back before starting factory reset, does not enable Java to install correctly. The factory reset image isn't really the same as what is installed in the main partition when you buy the system. Naughty Lenovo. The installer appears to crash while installing or displaying something to do with the Ask.com toolbar. That seems to be what javaic.dll does. Microsoft Tuesday was the 14th. Some update in that could be causing this. However, I'm factory reseting the machine every time, so unless the patches get slipstreamed into the recovery image, or there is some mechanism by which they get silently installed even if updates are disabled, then I don't see how this can be the cause. Major breakthrough: The default browser on Lenovo systems is Google Chrome. I noticed that the JavaIC.dll "sponsor check" actually does a check on your default browser in order to decide which sponsor ad to display. Normally that would get you the Ask toolbar on IE9. But that toolbar doesn't work on Chrome, and so the installer tries to display a different ad. The different ad is what causes the crash. Changing the default browser to IE9 allows the installer to run correctly. So this looks like a genuine bug in the sponsor ad code in the installer, caused by a combination of Google Chrome default browser and not being in the US. (Installer also checks your location using IP geolocation service and displays different ads based on that.)

  Read the article

• maven sonar problem

  - by senzacionale

  I want to use sonar for analysis but i can't get any data in localhost:9000 <?xml version="1.0" encoding="UTF-8"?> <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd"> <modelVersion>4.0.0</modelVersion> <artifactId>KIS</artifactId> <groupId>KIS</groupId> <version>1.0</version> <build> <plugins> <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-antrun-plugin</artifactId> <version>1.4</version> <executions> <execution> <id>compile</id> <phase>compile</phase> <configuration> <tasks> <property name="compile_classpath" refid="maven.compile.classpath"/> <property name="runtime_classpath" refid="maven.runtime.classpath"/> <property name="test_classpath" refid="maven.test.classpath"/> <property name="plugin_classpath" refid="maven.plugin.classpath"/> <ant antfile="${basedir}/build.xml"> <target name="maven-compile"/> </ant> </tasks> </configuration> <goals> <goal>run</goal> </goals> </execution> </executions> </plugin> </plugins> </build> </project> output when running sonar: jar file is empty [INFO] Executed tasks [INFO] [resources:testResources {execution: default-testResources}] [WARNING] Using platform encoding (Cp1250 actually) to copy filtered resources, i.e. build is platform dependent! [INFO] skip non existing resourceDirectory J:\ostalo_6i\KIS deploy\ANT\src\test\resources [INFO] [compiler:testCompile {execution: default-testCompile}] [INFO] No sources to compile [INFO] [surefire:test {execution: default-test}] [INFO] No tests to run. [INFO] [jar:jar {execution: default-jar}] [WARNING] JAR will be empty - no content was marked for inclusion! [INFO] Building jar: J:\ostalo_6i\KIS deploy\ANT\target\KIS-1.0.jar [INFO] [install:install {execution: default-install}] [INFO] Installing J:\ostalo_6i\KIS deploy\ANT\target\KIS-1.0.jar to C:\Documents and Settings\MitjaG\.m2\repository\KIS\KIS\1.0\KIS-1.0.jar [INFO] ------------------------------------------------------------------------ [INFO] Building Unnamed - KIS:KIS:jar:1.0 [INFO] task-segment: [sonar:sonar] (aggregator-style) [INFO] ------------------------------------------------------------------------ [INFO] [sonar:sonar {execution: default-cli}] [INFO] Sonar host: http://localhost:9000 [INFO] Sonar version: 2.1.2 [INFO] [sonar-core:internal {execution: default-internal}] [INFO] Database dialect class org.sonar.api.database.dialect.Oracle [INFO] ------------- Analyzing Unnamed - KIS:KIS:jar:1.0 [INFO] Selected quality profile : KIS, language=java [INFO] Configure maven plugins... [INFO] Sensor SquidSensor... [INFO] Sensor SquidSensor done: 16 ms [INFO] Sensor JavaSourceImporter... [INFO] Sensor JavaSourceImporter done: 0 ms [INFO] Sensor AsynchronousMeasuresSensor... [INFO] Sensor AsynchronousMeasuresSensor done: 15 ms [INFO] Sensor SurefireSensor... [INFO] parsing J:\ostalo_6i\KIS deploy\ANT\target\surefire-reports [INFO] Sensor SurefireSensor done: 47 ms [INFO] Sensor ProfileSensor... [INFO] Sensor ProfileSensor done: 16 ms [INFO] Sensor ProjectLinksSensor... [INFO] Sensor ProjectLinksSensor done: 0 ms [INFO] Sensor VersionEventsSensor... [INFO] Sensor VersionEventsSensor done: 31 ms [INFO] Sensor CpdSensor... [INFO] Sensor CpdSensor done: 0 ms [INFO] Sensor Maven dependencies... [INFO] Sensor Maven dependencies done: 16 ms [INFO] Execute decorators... [INFO] ANALYSIS SUCCESSFUL, you can browse http://localhost:9000 [INFO] Database optimization... [INFO] Database optimization done: 172 ms [INFO] ------------------------------------------------------------------------ [INFO] BUILD SUCCESSFUL [INFO] ------------------------------------------------------------------------ [INFO] Total time: 6 minutes 16 seconds [INFO] Finished at: Fri Jun 11 08:28:26 CEST 2010 [INFO] Final Memory: 24M/43M [INFO] ------------------------------------------------------------------------ any idea why, i successfully compile with maven ant plugin java project.

  Read the article

• NSMutableString leaks on append or replaceOccurrencesOfString

  - by John

  Hello Folks, I know similar questions have been asked time and time again but I ask that you please bear with me as I cannot seem to find an answer that helps. My application has leaks that are driving me out of my mind. Actually, they are not reported as leaks using Leaks, but my net bytes in ObjectAlloc goes up and up and up and never stops, eventually leading to a crash if it goes on long enough (not very long). The problem occurs with NSMutableStrings. I think there is either something fundamental I don't understand about them, or I am facing another problem that I am having difficulty tracking down but keeps hiding behind the NSMutableStrings. Specifically, I am noticing that whenever I append to or perform a replace on a NSMutableString, ObjectAlloc reports what appear to be mismatches in malloc/frees behind the scene when resizing the NSMutableString. I'm sorry to say this is the second time I'm facing this problem - the first time I messed around for hours and hours and finally the problem went away (magic!) but I don't really know why. When I look at the code below (and believe me, I've stared at it for hours) I cannot see the problem. I look at the code and think to myself that I should be fine because I'm releasing the only object for which I am responsible (aString) and that NSMutableString should be taking care of cleaning up after any resizing it does. In the second example, just so you know in case it helps, the string being passed in comes from an ASIHTTPRequest object (it's the responseString) and I don't do anything at all with it. It's being called simply like so ([self DoStuff2:[request responseString]]) and I don't free the request myself either (I'm using a ASINetworkQueue and I assume that the requests are destroyed for me (I tried and caused errors because the request was already being release somewhere else). Also, I know it shouldn't do anything, but I even tried wrapping the code in autorelease pools, which of course did nothing. I should mention that this code is being run inside of an NSOperation. I thought that perhaps I am experiencing problems because NSOperations should create an autorelease pool for themselves, but I've tried that to no avail. Not related to NSMutableString, but I find I also have similar problems using the NSString componentsSeparatedByString method. Sometimes the memory used by the array that gets the separated components is never released. Hmmm...strings in general seem to be somewhat problematic for me it seems. I would appreciate ANY help anyone can provide. If you require more info, I'll be glad to add it. I do promise you that I've struggled with this (and other problems) for weeks and every problem I encounter I research hard and long until I find a solution - this is not an idle request, but a true cry for help! I've written so much code and now I'm trying to seal some small leaks etc and I notice this problem. Honestly, I cannot believe how memory management in Objective C can stump me so at times...I've read Apple's memory mgmt docs many times and I thought I thoroughly understood it and I try to be diligent about releasing objects I own, but sometimes I find myself wondering if I truly understand...I would like to put this to bed once and make sure I understand all this fully - to have this sort of question/problem after writing thousands of lines of code is more than a little scary/embarrassing/annoying. So again, if anybody has any insight, I'd be grateful. Thanks for your time and efforts. -(void)DoStuff { NSString *aString [ [[NSString alloc] initWithFormat:@"text %@ more text", self.strVariable]; [self.someMutableStringVar replaceOccurrencesOfString:@"replace" withString:aString options:NSCaseInsensitiveSearch range:NSMakeRange(0, [self.someMutableStringVar length])]; [aString release]; } -(void)DoStuff2:(NSString *)aString { [self.someMutableStringVar appendString:aString]; }

  Read the article

• Server Memory with Magento

  - by Mohamed Elgharabawy

  I have a cloud server with the following specifications: 2vCPUs 4G RAM 160GB Disk Space Network 400Mb/s System Image: Ubuntu 12.04 LTS I am only running Magento CE 1.7.0.2 on this server. Nothing else. Usually, the server has a loading time of 4-5 seconds. Recently, this has dropped to over 30 seconds and sometimes the server just goes away and I get HTTP error reports to my email stating that HTTP requests took more than 20000ms. Running top command and sorting them returns the following: top - 15:29:07 up 3:40, 1 user, load average: 28.59, 25.95, 22.91 Tasks: 112 total, 30 running, 82 sleeping, 0 stopped, 0 zombie Cpu(s): 90.2%us, 9.3%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.3%si, 0.2%st PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 31901 www-data 20 0 360m 71m 5840 R 7 1.8 1:39.51 apache2 32084 www-data 20 0 362m 72m 5548 R 7 1.8 1:31.56 apache2 32089 www-data 20 0 348m 59m 5660 R 7 1.5 1:41.74 apache2 32295 www-data 20 0 343m 54m 5532 R 7 1.4 2:00.78 apache2 32303 www-data 20 0 354m 65m 5260 R 7 1.6 1:38.76 apache2 32304 www-data 20 0 346m 56m 5544 R 7 1.4 1:41.26 apache2 32305 www-data 20 0 348m 59m 5640 R 7 1.5 1:50.11 apache2 32291 www-data 20 0 358m 69m 5256 R 6 1.7 1:44.26 apache2 32517 www-data 20 0 345m 56m 5532 R 6 1.4 1:45.56 apache2 30473 www-data 20 0 355m 66m 5680 R 6 1.7 2:00.05 apache2 32093 www-data 20 0 352m 63m 5848 R 6 1.6 1:53.23 apache2 32302 www-data 20 0 345m 56m 5512 R 6 1.4 1:55.87 apache2 32433 www-data 20 0 346m 57m 5500 S 6 1.4 1:31.58 apache2 32638 www-data 20 0 354m 65m 5508 R 6 1.6 1:36.59 apache2 32230 www-data 20 0 347m 57m 5524 R 6 1.4 1:33.96 apache2 32231 www-data 20 0 355m 66m 5512 R 6 1.7 1:37.47 apache2 32233 www-data 20 0 354m 64m 6032 R 6 1.6 1:59.74 apache2 32300 www-data 20 0 355m 66m 5672 R 6 1.7 1:43.76 apache2 32510 www-data 20 0 347m 58m 5512 R 6 1.5 1:42.54 apache2 32521 www-data 20 0 348m 59m 5508 R 6 1.5 1:47.99 apache2 32639 www-data 20 0 344m 55m 5512 R 6 1.4 1:34.25 apache2 32083 www-data 20 0 345m 56m 5696 R 5 1.4 1:59.42 apache2 32085 www-data 20 0 347m 58m 5692 R 5 1.5 1:42.29 apache2 32293 www-data 20 0 353m 64m 5676 R 5 1.6 1:52.73 apache2 32301 www-data 20 0 348m 59m 5564 R 5 1.5 1:49.63 apache2 32528 www-data 20 0 351m 62m 5520 R 5 1.6 1:36.11 apache2 31523 mysql 20 0 3460m 576m 8288 S 5 14.4 2:06.91 mysqld 32002 www-data 20 0 345m 55m 5512 R 5 1.4 2:01.88 apache2 32080 www-data 20 0 357m 68m 5512 S 5 1.7 1:31.30 apache2 32163 www-data 20 0 347m 58m 5512 S 5 1.5 1:58.68 apache2 32509 www-data 20 0 345m 56m 5504 R 5 1.4 1:49.54 apache2 32306 www-data 20 0 358m 68m 5504 S 4 1.7 1:53.29 apache2 32165 www-data 20 0 344m 55m 5524 S 4 1.4 1:40.71 apache2 32640 www-data 20 0 345m 56m 5528 R 4 1.4 1:36.49 apache2 31888 www-data 20 0 359m 70m 5664 R 4 1.8 1:57.07 apache2 32511 www-data 20 0 357m 67m 5512 S 3 1.7 1:47.00 apache2 32054 www-data 20 0 357m 68m 5660 S 2 1.7 1:53.10 apache2 1 root 20 0 24452 2276 1232 S 0 0.1 0:01.58 init Moreover, running free -m returns the following: total used free shared buffers cached Mem: 4003 3919 83 0 118 901 -/+ buffers/cache: 2899 1103 Swap: 0 0 0 To investigate this further, I have installed apache buddy, it recommeneded that I need to reduce the maxclient connections. Which I did. I also installed MysqlTuner and it suggests that I need to set my innodb_buffer_pool_size to = 3.0G. However, I cannot do that, since the whole memory is 4G. Here is the output from apache buddy: ### GENERAL REPORT ### Settings considered for this report: Your server's physical RAM: 4003MB Apache's MaxClients directive: 40 Apache MPM Model: prefork Largest Apache process (by memory): 73.77MB [ OK ] Your MaxClients setting is within an acceptable range. Max potential memory usage: 2950.8 MB Percentage of RAM allocated to Apache 73.72 % And this is the output of MySQLTuner: -------- Performance Metrics ------------------------------------------------- [--] Up for: 47m 22s (675K q [237.552 qps], 12K conn, TX: 1B, RX: 300M) [--] Reads / Writes: 45% / 55% [--] Total buffers: 2.1G global + 2.7M per thread (151 max threads) [OK] Maximum possible memory usage: 2.5G (64% of installed RAM) [OK] Slow queries: 0% (0/675K) [OK] Highest usage of available connections: 26% (40/151) [OK] Key buffer size / total MyISAM indexes: 36.0M/18.7M [OK] Key buffer hit rate: 100.0% (245K cached / 105 reads) [OK] Query cache efficiency: 92.5% (500K cached / 541K selects) [!!] Query cache prunes per day: 302886 [OK] Sorts requiring temporary tables: 0% (1 temp sorts / 15K sorts) [!!] Joins performed without indexes: 12135 [OK] Temporary tables created on disk: 25% (8K on disk / 32K total) [OK] Thread cache hit rate: 90% (1K created / 12K connections) [!!] Table cache hit rate: 17% (400 open / 2K opened) [OK] Open file limit used: 12% (123/1K) [OK] Table locks acquired immediately: 100% (196K immediate / 196K locks) [!!] InnoDB buffer pool / data size: 2.0G/3.5G [OK] InnoDB log waits: 0 -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Enable the slow query log to troubleshoot bad queries Adjust your join queries to always utilize indexes Increase table_cache gradually to avoid file descriptor limits Read this before increasing table_cache over 64: http://bit.ly/1mi7c4C Variables to adjust: query_cache_size ( 64M) join_buffer_size ( 128.0K, or always use indexes with joins) table_cache ( 400) innodb_buffer_pool_size (= 3G) Last but not least, the server still has more than 60% of free disk space. Now, based on the above, I have few questions: Are these numbers normal? Do they make sense? Do I need to upgrade the server? If I don't need to upgrade and my configuration is not correct, how do I optimize it?

  Read the article

• puppet master REST API returns 403 when running under passenger works when master runs from command line

  - by Anadi Misra

  I am using the standard auth.conf provided in puppet install for the puppet master which is running through passenger under Nginx. However for most of the catalog, files and certitifcate request I get a 403 response. ### Authenticated paths - these apply only when the client ### has a valid certificate and is thus authenticated # allow nodes to retrieve their own catalog path ~ ^/catalog/([^/]+)$ method find allow $1 # allow nodes to retrieve their own node definition path ~ ^/node/([^/]+)$ method find allow $1 # allow all nodes to access the certificates services path ~ ^/certificate_revocation_list/ca method find allow * # allow all nodes to store their reports path /report method save allow * # unconditionally allow access to all file services # which means in practice that fileserver.conf will # still be used path /file allow * ### Unauthenticated ACL, for clients for which the current master doesn't ### have a valid certificate; we allow authenticated users, too, because ### there isn't a great harm in letting that request through. # allow access to the master CA path /certificate/ca auth any method find allow * path /certificate/ auth any method find allow * path /certificate_request auth any method find, save allow * path /facts auth any method find, search allow * # this one is not stricly necessary, but it has the merit # of showing the default policy, which is deny everything else path / auth any Puppet master however does not seems to be following this as I get this error on client [amisr1@blramisr195602 ~]$ sudo puppet agent --no-daemonize --verbose --server bangvmpllda02.XXXXX.com [sudo] password for amisr1: Starting Puppet client version 3.0.1 Warning: Unable to fetch my node definition, but the agent run will continue: Warning: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /certificate_revocation_list/ca [find] at :110 Info: Retrieving plugin Error: /File[/var/lib/puppet/lib]: Failed to generate additional resources using 'eval_generate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [search] at :110 Error: /File[/var/lib/puppet/lib]: Could not evaluate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Could not retrieve file metadata for puppet://devops.XXXXX.com/plugins: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Error: Could not retrieve catalog from remote server: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /catalog/blramisr195602.XXXXX.com [find] at :110 Using cached catalog Error: Could not retrieve catalog; skipping run Error: Could not send report: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /report/blramisr195602.XXXXX.com [save] at :110 and the server logs show XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/certificate_revocation_list/ca? HTTP/1.1" 403 102 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadatas/plugins?links=manage&recurse=true&&ignore=---+%0A++-+%22.svn%22%0A++-+CVS%0A++-+%22.git%22&checksum_type=md5 HTTP/1.1" 403 95 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadata/plugins? HTTP/1.1" 403 93 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "POST /production/catalog/blramisr195602.XXXXX.com HTTP/1.1" 403 106 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "PUT /production/report/blramisr195602.XXXXX.com HTTP/1.1" 403 105 "-" "Ruby" thefile server conf file is as follows (and goin by what they say on puppet site, It is better to regulate access in auth.conf for reaching file server and then allow file server to server all) [files] path /apps/puppet/files allow * [private] path /apps/puppet/private/%H allow * [modules] allow * I am using server and client version 3 Nginx has been compiled using the following options nginx version: nginx/1.3.9 built by gcc 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) TLS SNI support enabled configure arguments: --prefix=/apps/nginx --conf-path=/apps/nginx/nginx.conf --pid-path=/apps/nginx/run/nginx.pid --error-log-path=/apps/nginx/logs/error.log --http-log-path=/apps/nginx/logs/access.log --with-http_ssl_module --with-http_gzip_static_module --add-module=/usr/lib/ruby/gems/1.8/gems/passenger-3.0.18/ext/nginx --add-module=/apps/Downloads/nginx/nginx-auth-ldap-master/ and the standard nginx puppet master conf server { ssl on; listen 8140 ssl; server_name _; passenger_enabled on; passenger_set_cgi_param HTTP_X_CLIENT_DN $ssl_client_s_dn; passenger_set_cgi_param HTTP_X_CLIENT_VERIFY $ssl_client_verify; passenger_min_instances 5; access_log logs/puppet_access.log; error_log logs/puppet_error.log; root /apps/nginx/html/rack/public; ssl_certificate /var/lib/puppet/ssl/certs/bangvmpllda02.XXXXXX.com.pem; ssl_certificate_key /var/lib/puppet/ssl/private_keys/bangvmpllda02.XXXXXX.com.pem; ssl_crl /var/lib/puppet/ssl/ca/ca_crl.pem; ssl_client_certificate /var/lib/puppet/ssl/certs/ca.pem; ssl_ciphers SSLv2:-LOW:-EXPORT:RC4+RSA; ssl_prefer_server_ciphers on; ssl_verify_client optional; ssl_verify_depth 1; ssl_session_cache shared:SSL:128m; ssl_session_timeout 5m; } Puppet is picking up the correct settings from the files mentioned because config print command points to /etc/puppet [amisr1@bangvmpllDA02 puppet]$ sudo puppet config print | grep conf async_storeconfigs = false authconfig = /etc/puppet/namespaceauth.conf autosign = /etc/puppet/autosign.conf catalog_cache_terminus = store_configs confdir = /etc/puppet config = /etc/puppet/puppet.conf config_file_name = puppet.conf config_version = "" configprint = all configtimeout = 120 dblocation = /var/lib/puppet/state/clientconfigs.sqlite3 deviceconfig = /etc/puppet/device.conf fileserverconfig = /etc/puppet/fileserver.conf genconfig = false hiera_config = /etc/puppet/hiera.yaml localconfig = /var/lib/puppet/state/localconfig name = config rest_authconfig = /etc/puppet/auth.conf storeconfigs = true storeconfigs_backend = puppetdb tagmap = /etc/puppet/tagmail.conf thin_storeconfigs = false I checked the firewall rules on this VM; 80, 443, 8140, 3000 are allowed. Do I still have to tweak any specifics to auth.conf for getting this to work?

  Read the article

• Why do UInt16 arrays seem to add faster than int arrays?

  - by scraimer

  It seems that C# is faster at adding two arrays of UInt16[] than it is at adding two arrays of int[]. This makes no sense to me, since I would have assumed the arrays would be word-aligned, and thus int[] would require less work from the CPU, no? I ran the test-code below, and got the following results: Int for 1000 took 9896625613 tick (4227 msec) UInt16 for 1000 took 6297688551 tick (2689 msec) The test code does the following: Creates two arrays named a and b, once. Fills them with random data, once. Starts a stopwatch. Adds a and b, item-by-item. This is done 1000 times. Stops the stopwatch. Reports how long it took. This is done for int[] a, b and for UInt16 a,b. And every time I run the code, the tests for the UInt16 arrays take 30%-50% less time than the int arrays. Can you explain this to me? Here's the code, if you want to try if for yourself: public static UInt16[] GenerateRandomDataUInt16(int length) { UInt16[] noise = new UInt16[length]; Random random = new Random((int)DateTime.Now.Ticks); for (int i = 0; i < length; ++i) { noise[i] = (UInt16)random.Next(); } return noise; } public static int[] GenerateRandomDataInt(int length) { int[] noise = new int[length]; Random random = new Random((int)DateTime.Now.Ticks); for (int i = 0; i < length; ++i) { noise[i] = (int)random.Next(); } return noise; } public static int[] AddInt(int[] a, int[] b) { int len = a.Length; int[] result = new int[len]; for (int i = 0; i < len; ++i) { result[i] = (int)(a[i] + b[i]); } return result; } public static UInt16[] AddUInt16(UInt16[] a, UInt16[] b) { int len = a.Length; UInt16[] result = new UInt16[len]; for (int i = 0; i < len; ++i) { result[i] = (ushort)(a[i] + b[i]); } return result; } public static void Main() { int count = 1000; int len = 128 * 6000; int[] aInt = GenerateRandomDataInt(len); int[] bInt = GenerateRandomDataInt(len); Stopwatch s = new Stopwatch(); s.Start(); for (int i=0; i<count; ++i) { int[] resultInt = AddInt(aInt, bInt); } s.Stop(); Console.WriteLine("Int for " + count + " took " + s.ElapsedTicks + " tick (" + s.ElapsedMilliseconds + " msec)"); UInt16[] aUInt16 = GenerateRandomDataUInt16(len); UInt16[] bUInt16 = GenerateRandomDataUInt16(len); s = new Stopwatch(); s.Start(); for (int i=0; i<count; ++i) { UInt16[] resultUInt16 = AddUInt16(aUInt16, bUInt16); } s.Stop(); Console.WriteLine("UInt16 for " + count + " took " + s.ElapsedTicks + " tick (" + s.ElapsedMilliseconds + " msec)"); }

  Read the article

• Munin email notification

  - by Prashanth

  I am trying to get munin to notify me via email. I have configured munin and it reports critical and warning values but no alerts are being sent neither is any script being called. Can you please help me out with this? I have included part of the munin.conf below # Drop [email protected] and [email protected] an email everytime # something changes (OK -> WARNING, CRITICAL -> OK, etc) #contact.someuser.command mail -s "Munin notification" [email protected]\ contact.prashanth.command echo "Munin notification" | sendmail -t [email protected] contact.prashanth.always_send warning critical contact.root.command echo "Munin notification" | sendmail -t [email protected] contact.root.always_send warning critical contact.pipevia.command | /home/prashanth/script.sh /home/prashanth/script.sh None of this works. What am i missing here and why are emails not being sent? Thanks in advance. here is the munin-limits.log 2011/09/26 14:58:12 Opened log file 2011/09/26 14:58:12 [INFO] Starting munin-limits, getting lock /var/run/munin/munin-limits.lock 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 722. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 725. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 740. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 754. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 759. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $text in length at /usr/share/perl5/Munin/Master/LimitsOld.pm line 774. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $res[3] in join or string at /usr/share/perl5/Munin/Master/LimitsOld.pm line 777. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 722. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 725. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 740. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 754. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 759. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $text in length at /usr/share/perl5/Munin/Master/LimitsOld.pm line 774. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $res[15] in join or string at /usr/share/perl5/Munin/Master/LimitsOld.pm line 777. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 722. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 725. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 740. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 754. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 759. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $text in length at /usr/share/perl5/Munin/Master/LimitsOld.pm line 774. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $res[1] in join or string at /usr/share/perl5/Munin/Master/LimitsOld.pm line 777. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 722. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 725. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 740. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 754. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 759. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $text in length at /usr/share/perl5/Munin/Master/LimitsOld.pm line 774. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $res[1] in join or string at /usr/share/perl5/Munin/Master/LimitsOld.pm line 777. 2011/09/26 14:58:12 Baz? 2011/09/26 14:58:12 [INFO] munin-limits finished (0.02 sec) 2011/09/26 14:58:12 Command "prashanth" stderr: Munin notification - this is a test mail from the user prashanth | sendmail -t [email protected]

  Read the article

• Win32: IProgressDialog will not disappear until you mouse over it.

  - by Ian Boyd

  i'm using the Win32 progress dialog. The damnest thing is that when i call: progressDialog.StopProgressDialog(); it doesn't disappear. It stays on screen until the user moves her mouse over it - then it suddenly disappers. The call to StopProgressDialog returns right away (i.e. it's not a synchronous call). i can prove this by doing things after the call has returned: private void button1_Click(object sender, EventArgs e) { //Force red background to prove we've started this.BackColor = Color.Red; this.Refresh(); //Start a progress dialog IProgressDialog pd = (IProgressDialog)new ProgressDialog(); pd.StartProgressDialog(this.Handle, null, PROGDLG.Normal, IntPtr.Zero); //The long running operation System.Threading.Thread.Sleep(10000); //Stop the progress dialog pd.SetLine(1, "Stopping Progress Dialog", false, IntPtr.Zero); pd.StopProgressDialog(); pd = null; //Return form to normal color to prove we've stopped. this.BackColor = SystemColors.Control; this.Refresh(); } The form: starts gray turns red to show we've stared turns back to gray color to show we've called stop So the call to StopProgressDialog has returned, except the progress dialog is still sitting there, mocking me, showing the message: Stopping Progress Dialog Doesn't Appear for 10 seconds Additionally, the progress dialog does not appear on screen until the System.Threading.Thread.Sleep(10000); ten second sleep is over. Not limited to .NET WinForms The same code also fails in Delphi, which is also an object wrapper around Window's windows: procedure TForm1.Button1Click(Sender: TObject); var pd: IProgressDialog; begin Self.Color := clRed; Self.Repaint; pd := CoProgressDialog.Create; pd.StartProgressDialog(Self.Handle, nil, PROGDLG_NORMAL, nil); Sleep(10000); pd.SetLine(1, StringToOleStr('Stopping Progress Dialog'), False, nil); pd.StopProgressDialog; pd := nil; Self.Color := clBtnFace; Self.Repaint; end; PreserveSig An exception would be thrown if StopProgressDialog was failing. Most of the methods in IProgressDialog, when translated into C# (or into Delphi), use the compiler's automatic mechanism of converting failed COM HRESULTS into a native language exception. In other words the following two signatures will throw an exception if the COM call returned an error HRESULT (i.e. a value less than zero): //C# void StopProgressDialog(); //Delphi procedure StopProgressDialog; safecall; Whereas the following lets you see the HRESULT's and react yourself: //C# [PreserveSig] int StopProgressDialog(); //Delphi function StopProgressDialog: HRESULT; stdcall; HRESULT is a 32-bit value. If the high-bit is set (or the value is negative) it is an error. i am using the former syntax. So if StopProgressDialog is returning an error it will be automatically converted to a language exception. Note: Just for SaG i used the [PreserveSig] syntax, the returned HRESULT is zero; MsgWait? The symptom is similar to what Raymond Chen described once, which has to do with the incorrect use of PeekMessage followed by MsgWaitForMultipleObjects: "Sometimes my program gets stuck and reports one fewer record than it should. I have to jiggle the mouse to get the value to update. After a while longer, it falls two behind, then three..." But that would mean that the failure is in IProgressDialog, since it fails equally well on CLR .NET WinForms and native Win32 code.

  Read the article

• how to run this qt script? (newbie question)

  - by GB_J

  I have a qt script(barchart.qs) that creates a graph for me. I don't know how i can incorporate(ie show the graph) in my qt mainwindow. Can some one please help me look at the code and what its outputs are? I tried engine.evaluate, but i do not know what is the QScriptValue i'm getting in return. Thanks sooo much. This is the script: BarChart.prototype = new QWidget; BarChart.prototype.suffix = ""; function BarChart(parent) { QWidget.call(this, parent); } // find the maximum value and widest (pixel-wise) label and suffix BarChart.prototype.showEvent = function(event) { var fm = new QFontMetrics(this); this.margin = 20; this.titleHeight = fm.height(); this.barHeight = 1.5 * fm.height(); this.barSpacing = 0.6 * fm.height(); this.maxValue = this.suffixWidth = this.labelWidth = 0; var count = 0; for (d in this.data) { this.labelWidth = Math.max(this.labelWidth, fm.width(d)); this.maxValue = Math.max(this.maxValue, this.data[d]); this.suffixWidth = Math.max(this.suffixWidth, fm.width(String(this.data[d]) + " " + this.suffix)); count++; } this.startHue = 15; this.hueDelta = 360 / count; this.size = new QSize(640, this.titleHeight + 2 * this.margin + (this.barHeight + this.barSpacing) * count); } BarChart.prototype.paintEvent = function(event) { var p = new QPainter; p.begin(this); // background and title p.fillRect(this.rect, new QBrush(new QColor(255, 255, 255))); p.drawText(0, 0, this.width, this.margin + this.titleHeight, Qt.AlignCenter, this.windowTitle, 0); var ofs = this.labelWidth + this.margin; var ww = this.width - this.suffixWidth - ofs - 2 * this.margin; var hue = this.startHue; var y = 0; p.translate(this.margin, this.titleHeight + 1.5 * this.margin); for (d in this.data) { // label on the left side p.setPen(new QColor(Qt.black)); p.drawText(0, y, this.labelWidth, this.barHeight, Qt.AlignVCenter + Qt.AlignRight, d, 0); // the colored bar var gradient = new QLinearGradient(new QPoint(ofs, y), new QPoint(ofs, y + this.barHeight)); gradient.setColorAt(0, QColor.fromHsv(hue, 255, 240)); gradient.setColorAt(1, QColor.fromHsv(hue, 255, 92)); p.setBrush(new QBrush(gradient)); p.setPen(new QColor(96, 96, 96)); var bw = this.data[d] * ww / this.maxValue; p.drawRect(ofs, y, bw, this.barHeight); // extra text at the end of the bar var text = new String(this.data[d] + " " + this.suffix); p.setPen(new QColor(Qt.black)); p.drawText(ofs + bw + this.margin/2, y, this.suffixWidth, this.barHeight, Qt.AlignVCenter + Qt.AlignLeft, text, 0); // for the next bar y += (this.barHeight + this.barSpacing); hue += this.hueDelta; if (hue >= 360) hue -= 360; } p.end(); } BarChart.prototype.wheelEvent = function(event) { this.startHue += event.delta() / 8 / 5; if (this.startHue = 360) this.startHue -= 360; if (this.startHue < 0) this.startHue += 360; this.update(); event.ignore(); } BarChart.prototype.mousePressEvent = function(event) { var fname = QFileDialog.getSaveFileName(this, "Save", ".", "*.png", 0, 0); if (fname.length > 0) { var img = new QImage(this.size, QImage.Format_ARGB32_Premultiplied); this.render(img); img.save(new QFile(fname)); } } var chart = new BarChart; chart.windowTitle = "Monthly"; chart.suffix = "reports"; chart.data = { "September" : 45, "October" : 60, "November" : 56, "December" : 0 }; chart.show(); QCoreApplication.exec();

  Read the article

• Asp.Net Export to Excel - Japanese Characters

  - by Kalyan

  I am currently using Visual Studio 2008 for my ASP .NET application. I am trying to Export some reports with Japanese Characters to Excel via the Response object. When I try to Export, all the Japanese characters looks garbled. It works fine with Chinese Characters. Here is what I tried: I tried Installed Japanese Language Pack / Encoding to UTF-8 / UTF-7 / Shift-JIS / Globalization (Web.Config) .. but no luck. Any Ideas how this can be fixed ? Thanks !! string attachment = "attachment; filename=PerksPlusReport.xls"; //Response.Clear(); Response.ClearContent(); Response.ClearHeaders(); Response.AddHeader("content-disposition", attachment); //Response.Charset = "UTF-8"; //Response.Charset = "UTF-7"; //Response.Charset = "Shift_JIS"; Response.ContentType = "application/vnd.ms-excel"; StringWriter sw = new StringWriter(); HtmlTextWriter htw = new HtmlTextWriter(sw); // Create a form to contain the grid HtmlForm frm = new HtmlForm(); ReportGridView.Parent.Controls.Add(frm); frm.Attributes["runat"] = "server"; GridView GridView2 = new GridView(); ReportView reportDetails = GetReportDetails(); GridView2.DataSource = GetReportResults(this.ReportId.Value, reportDetails.Sql); GridView2.DataBind(); PrepareGridViewForExport(GridView2); frm.Controls.Add(GridView2); frm.RenderControl(htw); string fileContents = sw.ToString(); int startSpot = fileContents.IndexOf("<table"); fileContents = fileContents.Substring(startSpot); int endSpot = fileContents.IndexOf("</table>"); fileContents = fileContents.Substring(0, endSpot + 8); try { // Replace all &lt; and &gt; with < and > fileContents = fileContents.Replace("&lt;", "<"); fileContents = fileContents.Replace("&gt;", ">"); fileContents = fileContents.Replace("€", "&euro;"); string RegularExpression = @"<a[^>]*>([^<]*)</a>"; Regex regex = new Regex(RegularExpression); //If match found .. uses the delegate function to replace the whole content with the filtered values if (regex.IsMatch(fileContents)) { regex.Replace(fileContents, delegate (Match m){return fileContents.Replace(m.Captures[0].Value, m.Groups[1].Value);}); } } catch (Exception ex2) { Response.Write(ex2.ToString()); } Response.Write(fileContents); Response.End();

  Read the article

• VFS: file-max limit 1231582 reached

  - by Rick Koshi

  I'm running a Linux 2.6.36 kernel, and I'm seeing some random errors. Things like ls: error while loading shared libraries: libpthread.so.0: cannot open shared object file: Error 23 Yes, my system can't consistently run an 'ls' command. :( I note several errors in my dmesg output: # dmesg | tail [2808967.543203] EXT4-fs (sda3): re-mounted. Opts: (null) [2837776.220605] xv[14450] general protection ip:7f20c20c6ac6 sp:7fff3641b368 error:0 in libpng14.so.14.4.0[7f20c20a9000+29000] [4931344.685302] EXT4-fs (md16): re-mounted. Opts: (null) [4982666.631444] VFS: file-max limit 1231582 reached [4982666.764240] VFS: file-max limit 1231582 reached [4982767.360574] VFS: file-max limit 1231582 reached [4982901.904628] VFS: file-max limit 1231582 reached [4982964.930556] VFS: file-max limit 1231582 reached [4982966.352170] VFS: file-max limit 1231582 reached [4982966.649195] top[31095]: segfault at 14 ip 00007fd6ace42700 sp 00007fff20746530 error 6 in libproc-3.2.8.so[7fd6ace3b000+e000] Obviously, the file-max errors look suspicious, being clustered together and recent. # cat /proc/sys/fs/file-max 1231582 # cat /proc/sys/fs/file-nr 1231712 0 1231582 That also looks a bit odd to me, but the thing is, there's no way I have 1.2 million files open on this system. I'm the only one using it, and it's not visible to anyone outside the local network. # lsof | wc 16046 148253 1882901 # ps -ef | wc 574 6104 44260 I saw some documentation saying: file-max & file-nr: The kernel allocates file handles dynamically, but as yet it doesn't free them again. The value in file-max denotes the maximum number of file- handles that the Linux kernel will allocate. When you get lots of error messages about running out of file handles, you might want to increase this limit. Historically, the three values in file-nr denoted the number of allocated file handles, the number of allocated but unused file handles, and the maximum number of file handles. Linux 2.6 always reports 0 as the number of free file handles -- this is not an error, it just means that the number of allocated file handles exactly matches the number of used file handles. Attempts to allocate more file descriptors than file-max are reported with printk, look for "VFS: file-max limit reached". My first reading of this is that the kernel basically has a built-in file descriptor leak, but I find that very hard to believe. It would imply that any system in active use needs to be rebooted every so often to free up the file descriptors. As I said, I can't believe this would be true, since it's normal to me to have Linux systems stay up for months (even years) at a time. On the other hand, I also can't believe that my nearly-idle system is holding over a million files open. Does anyone have any ideas, either for fixes or further diagnosis? I could, of course, just reboot the system, but I don't want this to be a recurring problem every few weeks. As a stopgap measure, I've quit Firefox, which was accounting for almost 2000 lines of lsof output (!) even though I only had one window open, and now I can run 'ls' again, but I doubt that will fix the problem for long. (edit: Oops, spoke too soon. By the time I finished typing out this question, the symptom was/is back) Thanks in advance for any help. And another update: My system was basically unusable, so I decided I had no option but to reboot. But before I did, I carefully quit one process at a time, checking /proc/sys/fs/file-nr after each termination. I found that, predictably, the number of open files gradually went down as I closed things down. Unfortunately, it wasn't a large effect. Yes, I was able to clear up 5000-10000 open files, but there were still over 1.2 million left. I shut down just about everything. All interactive shells, except for the one ssh I left open to finish closing down, httpd, even nfs service. Basically everything in the process table that wasn't a kernel process, and there were still an appalling number of files apparently left open. After the reboot, I found that /proc/sys/fs/file-nr showed about 2000 files open, which is much more reasonable. Starting up 2 Xvnc sessions as usual, along with the dozen or so monitoring windows I like to keep open, brought the total up to about 4000 files. I can see nothing wrong with that, of course, but I've obviously failed to identify the root cause. I'm still looking for ideas, since I definitely expect it to happen again. And another update, the next day: I watched the system carefully, and discovered that /proc/sys/fs/file-nr showed a growth of about 900 open files per hour. I shut down the system's only NFS client for the night, and the growth stopped. Mind you, it didn't free up the resources, but it did at least stop consuming more. Is this a known bug with NFS? I'll be bringing the NFS client back online today, and I'll narrow it down further. If anyone is familiar with this behavior, feel free to jump in with "Yeah, NFS4 has this problem, go back to NFS3" or something like that.

  Read the article

• Ant + JUnit: NoClassDefFoundError

  - by K-Boo

  Ok, I'm frustrated! I've hunted around for a good number of hours and am still stumped. Environment: WinXP, Eclipse Galileo 3.5 (straight install - no extra plugins). So, I have a simple JUnit test. It runs fine from it's internal Eclipse JUnit run configuration. This class has no dependencies on anything. To narrow this problem down as much as possible it simply contains: @Test public void testX() { assertEquals("1", new Integer(1).toString()); } No sweat so far. Now I want to take the super advanced step of running this test case from within Ant (the final goal is to integrate with Hudson). So, I create a build.xml: <project name="Test" default="basic"> <property name="default.target.dir" value="${basedir}/target" /> <property name="test.report.dir" value="${default.target.dir}/test-reports" /> <target name="basic"> <mkdir dir="${test.report.dir}" /> <junit fork="true" printSummary="true" showOutput="true"> <formatter type="plain" /> <classpath> <pathelement path="${basedir}/bin "/> </classpath> <batchtest fork="true" todir="${test.report.dir}" > <fileset dir="${basedir}/bin"> <include name="**/*Test.*" /> </fileset> </batchtest> </junit> </target> </project> ${basedir} is the Java project name in the workspace that contains the source, classes and build file. All .java's and the build.xml are in ${basedir}/src. The .class files are in ${basedir}/bin. I have added eclipse-install-dir/plugins/org.junit4_4.5.0.v20090423/junit.jar to the Ant Runtime Classpath via Windows / Preferences / Ant / Runtime / Contributed Entries. ant-junit.jar is in Ant Home Entries. So, what happens when I run this insanely complex target? My report file contains: Testsuite: com.xyz.test.RussianTest Tests run: 1, Failures: 0, Errors: 1, Time elapsed: 0 sec Testcase: initializationError took 0 sec Caused an ERROR org/hamcrest/SelfDescribing java.lang.NoClassDefFoundError: org/hamcrest/SelfDescribing at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClass(Unknown Source) at java.security.SecureClassLoader.defineClass(Unknown Source) at java.net.URLClassLoader.defineClass(Unknown Source) at java.net.URLClassLoader.access$000(Unknown Source) at java.net.URLClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClassInternal(Unknown Source) at java.lang.reflect.Constructor.newInstance(Unknown Source) Caused by: java.lang.ClassNotFoundException: org.hamcrest.SelfDescribing at java.net.URLClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClassInternal(Unknown Source) What is this org.hamcrest.SelfDescribing class? Something to do with mocks? OK, fine. But why the dependency? I'm not doing anything at all with it. This is literally a Java project with no dependencies other than JUnit. Stumped (and frustrated)!!

  Read the article

• What do I do when I get a Linux kernel bug?

  - by raldi

  I just bought a tiny computer called a fit-pc2 which came with a somewhat customized Ubuntu 9.10 installation. uname -a reports: Linux 2.6.31-34-fitpc2 #7 SMP Thu Apr 22 17:43:26 IDT 2010 i686 GNU/Linux It seems that after several hours of running with heavy network load, all networking ceases and I get the following in kern.log: BUG: unable to handle kernel paging request at ff09dfc0 IP: [<c0150300>] kthread_should_stop+0x10/0x20 *pde = 00000000 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb1/idVendor Modules linked in: binfmt_misc ppdev sbc_fitpc2_wdt snd_usb_audio snd_usb_lib i2c_isch sch_gpio snd_seq_dummy snd_hda_intel snd_pcm_oss snd_seq_oss snd_seq_midi snd_rawmidi snd_mixer_oss snd_seq_midi_event snd_seq snd_pcm snd_timer snd_page_alloc snd_seq_device iptable_filter ip_tables x_tables snd_hwdep lpc_sch snd psmouse rt2860sta(C) uvcvideo video pl2303 soundcore mfd_core output videodev v4l1_compat lirc_igorplugusb lirc_dev serio_raw lp parport usbhid r8169 mii iegd_mod drm agpgart Pid: 16, comm: kblockd/1 Tainted: G C (2.6.31-34-fitpc2 #7) SBC-FITPC2 EIP: 0060:[<c0150300>] EFLAGS: 00010246 CPU: 1 EIP is at kthread_should_stop+0x10/0x20 EAX: ff09dfc4 EBX: c180cbac ECX: 0109d000 EDX: f709df98 ESI: f709df98 EDI: c180cba0 EBP: f709dfb8 ESP: f709df90 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process kblockd/1 (pid: 16, ti=f709c000 task=f7084b60 task.ti=f709c000) Stack: c014c14d c180cba4 00000000 f7084b60 c0150770 f709dfa4 f709dfa4 f7023ef4 <0> c180cba0 c014c0d0 f709dfe0 c015047c 00000000 00000000 00000000 f709dfcc <0> f709dfcc c0150400 00000000 00000000 00000000 c0103ce7 f7023ef4 00000000 Call Trace: [<c014c14d>] ? worker_thread+0x7d/0xe0 [<c0150770>] ? autoremove_wake_function+0x0/0x40 [<c014c0d0>] ? worker_thread+0x0/0xe0 [<c015047c>] ? kthread+0x7c/0x90 [<c0150400>] ? kthread+0x0/0x90 [<c0103ce7>] ? kernel_thread_helper+0x7/0x10 Code: a6 8b 55 0c 8d 4d e0 89 f8 89 34 24 e8 7a fd ff ff 89 c3 eb 92 90 90 90 90 90 90 55 64 a1 00 80 76 c0 8b 80 70 02 00 00 89 e5 5d <8b> 40 fc c3 8d b6 00 00 00 00 8d bf 00 00 00 00 55 ba d7 86 62 EIP: [<c0150300>] kthread_should_stop+0x10/0x20 SS:ESP 0068:f709df90 CR2: 00000000ff09dfc0 ---[ end trace 06004df70b9cf435 ]--- BUG: unable to handle kernel paging request at ff09dfc8 IP: [<c0521bc8>] _spin_lock_irqsave+0x18/0x30 *pde = 00000000 Oops: 0002 [#2] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb1/idVendor Modules linked in: binfmt_misc ppdev sbc_fitpc2_wdt snd_usb_audio snd_usb_lib i2c_isch sch_gpio snd_seq_dummy snd_hda_intel snd_pcm_oss snd_seq_oss snd_seq_midi snd_rawmidi snd_mixer_oss snd_seq_midi_event snd_seq snd_pcm snd_timer snd_page_alloc snd_seq_device iptable_filter ip_tables x_tables snd_hwdep lpc_sch snd psmouse rt2860sta(C) uvcvideo video pl2303 soundcore mfd_core output videodev v4l1_compat lirc_igorplugusb lirc_dev serio_raw lp parport usbhid r8169 mii iegd_mod drm agpgart Pid: 16, comm: kblockd/1 Tainted: G D C (2.6.31-34-fitpc2 #7) SBC-FITPC2 EIP: 0060:[<c0521bc8>] EFLAGS: 00010086 CPU: 1 EIP is at _spin_lock_irqsave+0x18/0x30 EAX: 00000100 EBX: ff09dfc8 ECX: 00000286 EDX: ff09dfc8 ESI: f7084b60 EDI: ff09dfc4 EBP: f709dd88 ESP: f709dd88 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process kblockd/1 (pid: 16, ti=f709c000 task=f7084b60 task.ti=f709c000) Stack: f709dda4 c0127c0b 00000082 00000001 ff09dfc4 f7084b60 00000000 f709ddd0 <0> c0137fd2 00000086 f70954c4 00000000 f7098480 f709ddf0 f7094fc0 f7084b60 <0> 00000000 00000009 f709ddf0 c013c3f8 00000001 c1807c60 f709ddf0 f7084b60 Call Trace: [<c0127c0b>] ? complete+0x1b/0x60 [<c0137fd2>] ? mm_release+0x52/0xf0 [<c013c3f8>] ? exit_mm+0x18/0x110 [<c013c6db>] ? do_exit+0xfb/0x2e0 [<c013998a>] ? print_oops_end_marker+0x2a/0x30 [<c0522aab>] ? oops_end+0x8b/0xd0 [<c011eac4>] ? no_context+0xb4/0xd0 [<c011eb1d>] ? __bad_area_nosemaphore+0x3d/0x1a0 [<c0133a56>] ? load_balance_newidle+0x96/0x320 [<c011ec92>] ? bad_area_nosemaphore+0x12/0x20 [<c0524106>] ? do_page_fault+0x2f6/0x380 [<c012cc30>] ? finish_task_switch+0x50/0xe0 [<c0523e10>] ? do_page_fault+0x0/0x380 [<c0522006>] ? error_code+0x66/0x70 [<c0523e10>] ? do_page_fault+0x0/0x380 [<c0150300>] ? kthread_should_stop+0x10/0x20 [<c014c14d>] ? worker_thread+0x7d/0xe0 [<c0150770>] ? autoremove_wake_function+0x0/0x40 [<c014c0d0>] ? worker_thread+0x0/0xe0 [<c015047c>] ? kthread+0x7c/0x90 [<c0150400>] ? kthread+0x0/0x90 [<c0103ce7>] ? kernel_thread_helper+0x7/0x10 Code: 00 00 00 55 89 e5 f0 83 28 01 79 05 e8 02 ff ff ff 5d c3 55 89 c2 89 e5 9c 58 8d 74 26 00 89 c1 fa 90 8d 74 26 00 b8 00 01 00 00 <f0> 66 0f c1 02 38 e0 74 06 f3 90 8a 02 eb f6 89 c8 5d c3 90 8d EIP: [<c0521bc8>] _spin_lock_irqsave+0x18/0x30 SS:ESP 0068:f709dd88 CR2: 00000000ff09dfc8 ---[ end trace 06004df70b9cf436 ]--- Fixing recursive fault but reboot is needed! This seems to happen at least once a day. How do I even begin to debug this?

  Read the article

• What do I do when I get a Linux kernel bug?

  - by raldi

  I just bought a tiny computer called a fit-pc2 which came with a somewhat customized Ubuntu 9.10 installation. uname -a reports: Linux 2.6.31-34-fitpc2 #7 SMP Thu Apr 22 17:43:26 IDT 2010 i686 GNU/Linux It seems that after several hours of running with heavy network load, all networking ceases and I get the following in kern.log: BUG: unable to handle kernel paging request at ff09dfc0 IP: [<c0150300>] kthread_should_stop+0x10/0x20 *pde = 00000000 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb1/idVendor Modules linked in: binfmt_misc ppdev sbc_fitpc2_wdt snd_usb_audio snd_usb_lib i2c_isch sch_gpio snd_seq_dummy snd_hda_intel snd_pcm_oss snd_seq_oss snd_seq_midi snd_rawmidi snd_mixer_oss snd_seq_midi_event snd_seq snd_pcm snd_timer snd_page_alloc snd_seq_device iptable_filter ip_tables x_tables snd_hwdep lpc_sch snd psmouse rt2860sta(C) uvcvideo video pl2303 soundcore mfd_core output videodev v4l1_compat lirc_igorplugusb lirc_dev serio_raw lp parport usbhid r8169 mii iegd_mod drm agpgart Pid: 16, comm: kblockd/1 Tainted: G C (2.6.31-34-fitpc2 #7) SBC-FITPC2 EIP: 0060:[<c0150300>] EFLAGS: 00010246 CPU: 1 EIP is at kthread_should_stop+0x10/0x20 EAX: ff09dfc4 EBX: c180cbac ECX: 0109d000 EDX: f709df98 ESI: f709df98 EDI: c180cba0 EBP: f709dfb8 ESP: f709df90 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process kblockd/1 (pid: 16, ti=f709c000 task=f7084b60 task.ti=f709c000) Stack: c014c14d c180cba4 00000000 f7084b60 c0150770 f709dfa4 f709dfa4 f7023ef4 <0> c180cba0 c014c0d0 f709dfe0 c015047c 00000000 00000000 00000000 f709dfcc <0> f709dfcc c0150400 00000000 00000000 00000000 c0103ce7 f7023ef4 00000000 Call Trace: [<c014c14d>] ? worker_thread+0x7d/0xe0 [<c0150770>] ? autoremove_wake_function+0x0/0x40 [<c014c0d0>] ? worker_thread+0x0/0xe0 [<c015047c>] ? kthread+0x7c/0x90 [<c0150400>] ? kthread+0x0/0x90 [<c0103ce7>] ? kernel_thread_helper+0x7/0x10 Code: a6 8b 55 0c 8d 4d e0 89 f8 89 34 24 e8 7a fd ff ff 89 c3 eb 92 90 90 90 90 90 90 55 64 a1 00 80 76 c0 8b 80 70 02 00 00 89 e5 5d <8b> 40 fc c3 8d b6 00 00 00 00 8d bf 00 00 00 00 55 ba d7 86 62 EIP: [<c0150300>] kthread_should_stop+0x10/0x20 SS:ESP 0068:f709df90 CR2: 00000000ff09dfc0 ---[ end trace 06004df70b9cf435 ]--- BUG: unable to handle kernel paging request at ff09dfc8 IP: [<c0521bc8>] _spin_lock_irqsave+0x18/0x30 *pde = 00000000 Oops: 0002 [#2] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb1/idVendor Modules linked in: binfmt_misc ppdev sbc_fitpc2_wdt snd_usb_audio snd_usb_lib i2c_isch sch_gpio snd_seq_dummy snd_hda_intel snd_pcm_oss snd_seq_oss snd_seq_midi snd_rawmidi snd_mixer_oss snd_seq_midi_event snd_seq snd_pcm snd_timer snd_page_alloc snd_seq_device iptable_filter ip_tables x_tables snd_hwdep lpc_sch snd psmouse rt2860sta(C) uvcvideo video pl2303 soundcore mfd_core output videodev v4l1_compat lirc_igorplugusb lirc_dev serio_raw lp parport usbhid r8169 mii iegd_mod drm agpgart Pid: 16, comm: kblockd/1 Tainted: G D C (2.6.31-34-fitpc2 #7) SBC-FITPC2 EIP: 0060:[<c0521bc8>] EFLAGS: 00010086 CPU: 1 EIP is at _spin_lock_irqsave+0x18/0x30 EAX: 00000100 EBX: ff09dfc8 ECX: 00000286 EDX: ff09dfc8 ESI: f7084b60 EDI: ff09dfc4 EBP: f709dd88 ESP: f709dd88 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process kblockd/1 (pid: 16, ti=f709c000 task=f7084b60 task.ti=f709c000) Stack: f709dda4 c0127c0b 00000082 00000001 ff09dfc4 f7084b60 00000000 f709ddd0 <0> c0137fd2 00000086 f70954c4 00000000 f7098480 f709ddf0 f7094fc0 f7084b60 <0> 00000000 00000009 f709ddf0 c013c3f8 00000001 c1807c60 f709ddf0 f7084b60 Call Trace: [<c0127c0b>] ? complete+0x1b/0x60 [<c0137fd2>] ? mm_release+0x52/0xf0 [<c013c3f8>] ? exit_mm+0x18/0x110 [<c013c6db>] ? do_exit+0xfb/0x2e0 [<c013998a>] ? print_oops_end_marker+0x2a/0x30 [<c0522aab>] ? oops_end+0x8b/0xd0 [<c011eac4>] ? no_context+0xb4/0xd0 [<c011eb1d>] ? __bad_area_nosemaphore+0x3d/0x1a0 [<c0133a56>] ? load_balance_newidle+0x96/0x320 [<c011ec92>] ? bad_area_nosemaphore+0x12/0x20 [<c0524106>] ? do_page_fault+0x2f6/0x380 [<c012cc30>] ? finish_task_switch+0x50/0xe0 [<c0523e10>] ? do_page_fault+0x0/0x380 [<c0522006>] ? error_code+0x66/0x70 [<c0523e10>] ? do_page_fault+0x0/0x380 [<c0150300>] ? kthread_should_stop+0x10/0x20 [<c014c14d>] ? worker_thread+0x7d/0xe0 [<c0150770>] ? autoremove_wake_function+0x0/0x40 [<c014c0d0>] ? worker_thread+0x0/0xe0 [<c015047c>] ? kthread+0x7c/0x90 [<c0150400>] ? kthread+0x0/0x90 [<c0103ce7>] ? kernel_thread_helper+0x7/0x10 Code: 00 00 00 55 89 e5 f0 83 28 01 79 05 e8 02 ff ff ff 5d c3 55 89 c2 89 e5 9c 58 8d 74 26 00 89 c1 fa 90 8d 74 26 00 b8 00 01 00 00 <f0> 66 0f c1 02 38 e0 74 06 f3 90 8a 02 eb f6 89 c8 5d c3 90 8d EIP: [<c0521bc8>] _spin_lock_irqsave+0x18/0x30 SS:ESP 0068:f709dd88 CR2: 00000000ff09dfc8 ---[ end trace 06004df70b9cf436 ]--- Fixing recursive fault but reboot is needed! This seems to happen at least once a day. How do I even begin to debug this?

  Read the article

• calling calloc - memory leak valgrind

  - by Mike

  The following code is an example from the NCURSES menu library. I'm not sure what could be wrong with the code, but valgrind reports some problems. Any ideas... ==4803== 1,049 (72 direct, 977 indirect) bytes in 1 blocks are definitely lost in loss record 25 of 36 ==4803== at 0x4C24477: calloc (vg_replace_malloc.c:418) ==4803== by 0x400E93: main (in /home/gerardoj/a.out) ==4803== ==4803== LEAK SUMMARY: ==4803== definitely lost: 72 bytes in 1 blocks ==4803== indirectly lost: 977 bytes in 10 blocks ==4803== possibly lost: 0 bytes in 0 blocks ==4803== still reachable: 64,942 bytes in 262 blocks Source code: #include <curses.h> #include <menu.h> #define ARRAY_SIZE(a) (sizeof(a) / sizeof(a[0])) #define CTRLD 4 char *choices[] = { "Choice 1", "Choice 2", "Choice 3", "Choice 4", "Choice 5", "Choice 6", "Choice 7", "Exit", } ; int main() { ITEM **my_items; int c; MENU *my_menu; int n_choices, i; ITEM *cur_item; /* Initialize curses */ initscr(); cbreak(); noecho(); keypad(stdscr, TRUE); /* Initialize items */ n_choices = ARRAY_SIZE(choices); my_items = (ITEM **)calloc(n_choices + 1, sizeof(ITEM *)); for (i = 0; i < n_choices; ++i) { my_items[i] = new_item(choices[i], choices[i]); } my_items[n_choices] = (ITEM *)NULL; my_menu = new_menu((ITEM **)my_items); /* Make the menu multi valued */ menu_opts_off(my_menu, O_ONEVALUE); mvprintw(LINES - 3, 0, "Use <SPACE> to select or unselect an item."); mvprintw(LINES - 2, 0, "<ENTER> to see presently selected items(F1 to Exit)"); post_menu(my_menu); refresh(); while ((c = getch()) != KEY_F(1)) { switch (c) { case KEY_DOWN: menu_driver(my_menu, REQ_DOWN_ITEM); break; case KEY_UP: menu_driver(my_menu, REQ_UP_ITEM); break; case ' ': menu_driver(my_menu, REQ_TOGGLE_ITEM); break; case 10: { char temp[200]; ITEM **items; items = menu_items(my_menu); temp[0] = '\0'; for (i = 0; i < item_count(my_menu); ++i) if(item_value(items[i]) == TRUE) { strcat(temp, item_name(items[i])); strcat(temp, " "); } move(20, 0); clrtoeol(); mvprintw(20, 0, temp); refresh(); } break; } } free_item(my_items[0]); free_item(my_items[1]); free_menu(my_menu); endwin(); }

  Read the article

• jQuery .live fireing multiple times!

  - by cstrzelc

  Greetings Guru's, This is a little hard to explain, but I'll give it a shot. I have a quick question regarding to the .live() function in JQuery. I'm going to simplify the example here. I have a page "index.php" that has a container "#display_files_container" which is populated with anchor links that are generated dynamically by a different page "process.php". The links are loaded into that same <div> when those links are selected based on the attributes of that link. See Examples: INDEX.PHP <html> <head><title>index.php</title> <!-- this function below loads process.php and passes it the dirid variable via post. I then use this post variable inside of process.php to pull other links from the database --> <script language="text/javascript"> $('.directory').live("click", function() { $('#display_files_container').load('plugins/project_files/process.php', {dirid: $(this).attr('dirid')}); }); </script> </head> <?php /*This code initial populates the link array so we have the first links populated before the users clicks for the first time*/ some code to fetch the $current_directory_list array from the database initially.... >? <body> <div id='display_files_container'> <?php /*Cycle through the array and echo out all the links which have been pulled from DB*/ for($i=0;$i<$current_directory_count;$i++) { echo "<a href='#' class='directory' dirid='".$current_directory_list[$i]['id']." '>".$current_directory_list[$i]['directory_name']. "</a> "; } ?> </div> </body> </html> PROCESS.PHP this file includes code to populate the $current_directory_list[] array from the database based on the post variable "$_POST['dirid']" that was sent from the .click() method in index.php. It then echo's the results out and we display them in the #display_files_container container. When you click on those links the process repeats. This works..... you can click though the directory tree and it loads the new links every time. However, it seems to want to .load() the process.php file many times over for one click. The number of times process.php is loaded seems to increase the more the links are clicked. So for example you can click on a link and firebug reports that process.php was loaded 23 times..... Eventually I would imagine I would record a stackoverflow. Please let me know if you have any ideas. Are there any ways that I can assure that .live() loads the process.php file only once? Thanks, -cs

  Read the article

• BugZilla XML RPC Interface

  - by Damo

  I am attempting to setup BugZilla to receive but reports from another system using the XML-RPC interface. BugZilla works fine on its own with its own interface. When I attempt to test the XML-RPC functionality by accessing "xmlrpc.cgi" in my browser I get the error: The XML-RPC Interface feature is not available in this Bugzilla at C:\BugZilla\xmlrpc.cgi line 27 main::BEGIN(...) called at C:\BugZilla\xmlrpc.cgi line 29 eval {...} called at C:\BugZilla\xmlrpc.cgi line 29 Following this I install test-taint package from the default perl repository, this installs version 1.04. Re-running "xmlrpc.cgi" gives me an IIS error: 502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server. So I run the checksetup.pl which inform me that: Use of uninitialized value in open at C:/Perl/site/lib/Test/Taint.pm line 334, <DATA> line 558. Installing Test-Taint from CPAN is the same. I assume XML-RPC is relent on Test-Taint, but Test-Taint doesn't seem to run correctly. If I ignore this error and attempt to invoke "bz_webservice_demo.pl" to add an entry the script times out. How can I get the XML-RPC / Test-Taint function working ? Current Setup: IIS7.5 on Windows Server 2008 Bugzilla 4.2.2 Perl 5.14.2 C:\BugZilla>perl checksetup.pl Set up gcc environment - 3.4.5 (mingw-vista special r3) * This is Bugzilla 4.2.2 on perl 5.14.2 * Running on Win2008 Build 6002 (Service Pack 2) Checking perl modules... Checking for CGI.pm (v3.51) ok: found v3.59 Checking for Digest-SHA (any) ok: found v5.62 Checking for TimeDate (v2.21) ok: found v2.24 Checking for DateTime (v0.28) ok: found v0.76 Checking for DateTime-TimeZone (v0.79) ok: found v1.48 Checking for DBI (v1.614) ok: found v1.622 Checking for Template-Toolkit (v2.22) ok: found v2.24 Checking for Email-Send (v2.16) ok: found v2.198 Checking for Email-MIME (v1.904) ok: found v1.911 Checking for URI (v1.37) ok: found v1.59 Checking for List-MoreUtils (v0.22) ok: found v0.33 Checking for Math-Random-ISAAC (v1.0.1) ok: found v1.004 Checking for Win32 (v0.35) ok: found v0.44 Checking for Win32-API (v0.55) ok: found v0.64 Checking available perl DBD modules... Checking for DBD-Pg (v1.45) ok: found v2.18.1 Checking for DBD-mysql (v4.001) ok: found v4.021 Checking for DBD-SQLite (v1.29) ok: found v1.33 Checking for DBD-Oracle (v1.19) ok: found v1.30 The following Perl modules are optional: Checking for GD (v1.20) ok: found v2.46 Checking for Chart (v2.1) ok: found v2.4.5 Checking for Template-GD (any) ok: found v1.56 Checking for GDTextUtil (any) ok: found v0.86 Checking for GDGraph (any) ok: found v1.44 Checking for MIME-tools (v5.406) ok: found v5.503 Checking for libwww-perl (any) ok: found v6.02 Checking for XML-Twig (any) ok: found v3.41 Checking for PatchReader (v0.9.6) ok: found v0.9.6 Checking for perl-ldap (any) ok: found v0.44 Checking for Authen-SASL (any) ok: found v2.15 Checking for RadiusPerl (any) ok: found v0.20 Checking for SOAP-Lite (v0.712) ok: found v0.715 Checking for JSON-RPC (any) ok: found v0.96 Checking for JSON-XS (v2.0) ok: found v2.32 Use of uninitialized value in open at C:/Perl/site/lib/Test/Taint.pm line 334, <DATA> line 558. Checking for Test-Taint (any) ok: found v1.04 Checking for HTML-Parser (v3.67) ok: found v3.68 Checking for HTML-Scrubber (any) ok: found v0.09 Checking for Encode (v2.21) ok: found v2.44 Checking for Encode-Detect (any) not found Checking for Email-MIME-Attachment-Stripper (any) ok: found v1.316 Checking for Email-Reply (any) ok: found v1.202 Checking for TheSchwartz (any) not found Checking for Daemon-Generic (any) not found Checking for mod_perl (v1.999022) not found Checking for Apache-SizeLimit (v0.96) not found *********************************************************************** * OPTIONAL MODULES * *********************************************************************** * Certain Perl modules are not required by Bugzilla, but by * * installing the latest version you gain access to additional * * features. * * * * The optional modules you do not have installed are listed below, * * with the name of the feature they enable. Below that table are the * * commands to install each module. * *********************************************************************** * MODULE NAME * ENABLES FEATURE(S) * *********************************************************************** * Encode-Detect * Automatic charset detection for text attachments * * TheSchwartz * Mail Queueing * * Daemon-Generic * Mail Queueing * * mod_perl * mod_perl * * Apache-SizeLimit * mod_perl * *********************************************************************** COMMANDS TO INSTALL OPTIONAL MODULES: Encode-Detect: ppm install Encode-Detect TheSchwartz: ppm install TheSchwartz Daemon-Generic: ppm install Daemon-Generic mod_perl: ppm install mod_perl Apache-SizeLimit: ppm install Apache-SizeLimit Reading ./localconfig... OPTIONAL NOTE: If you want to be able to use the 'difference between two patches' feature of Bugzilla (which requires the PatchReader Perl module as well), you should install patchutils from: http://cyberelk.net/tim/patchutils/ Checking for DBD-mysql (v4.001) ok: found v4.021 Checking for MySQL (v5.0.15) ok: found v5.5.27 WARNING: You need to set the max_allowed_packet parameter in your MySQL configuration to at least 3276750. Currently it is set to 3275776. You can set this parameter in the [mysqld] section of your MySQL configuration file. Removing existing compiled templates... Precompiling templates...done. checksetup.pl complete.

  Read the article

• numpy calling sse2 via ctypes

  - by Daniel

  Hello, In brief, I am trying to call into a shared library from python, more specifically, from numpy. The shared library is implemented in C using sse2 instructions. Enabling optimisation, i.e. building the library with -O2 or –O1, I am facing strange segfaults when calling into the shared library via ctypes. Disabling optimisation (-O0), everything works out as expected, as is the case when linking the library to a c-program directly (optimised or not). Attached you find a snipped which exhibits the delineated behaviour on my system. With optimisation enabled, gdb reports a segfault in __builtin_ia32_loadupd (__P) at emmintrin.h:113. The value of __P is reported as optimised out. test.c: #include <emmintrin.h> #include <complex.h> void test(const int m, const double* x, double complex* y) { int i; __m128d _f, _x, _b; double complex f __attribute__( (aligned(16)) ); double complex b __attribute__( (aligned(16)) ); __m128d* _p; b = 1; _b = _mm_loadu_pd( (double *) &b ); _p = (__m128d*) y; for(i=0; i<m; ++i) { f = cexp(-I*x[i]); _f = _mm_loadu_pd( (double *) &f ); _x = _mm_loadu_pd( (double *) &x[i] ); _f = _mm_shuffle_pd(_f, _f, 1); *_p = _mm_add_pd(*_p, _f); *_p = _mm_add_pd(*_p, _x); *_p = _mm_mul_pd(*_p,_b); _p++; } return; } Compiler flags: gcc -o libtest.so -shared -std=c99 -msse2 -fPIC -O2 -g -lm test.c test.py: import numpy as np import os def zerovec_aligned(nr, dtype=np.float64, boundary=16): '''Create an aligned array of zeros. ''' size = nr * np.dtype(dtype).itemsize tmp = np.zeros(size + boundary, dtype=np.uint8) address = tmp.__array_interface__['data'][0] offset = boundary - address % boundary return tmp[offset:offset + size].view(dtype=dtype) lib = np.ctypeslib.load_library('libtest', '.' ) lib.test.restype = None lib.test.argtypes = [np.ctypeslib.ctypes.c_int, np.ctypeslib.ndpointer(np.float64, flags=('C', 'A') ), np.ctypeslib.ndpointer(np.complex128, flags=('C', 'A', 'W') )] n = 13 y = zerovec_aligned(n, dtype=np.complex128) x = np.ones(n, dtype=np.float64) # x = zerovec_aligned(n, dtype=np.float64) # x[:] = 1. lib.test(n,x,y) My system: Ubuntu Linux i686 2.6.31-22-generic Compiler: gcc (Ubuntu 4.4.1-4ubuntu9) Python: Python 2.6.4 (r264:75706, Dec 7 2009, 18:45:15) [GCC 4.4.1] Numpy: 1.4.0 I have taken provisions (cf. python code) that y is aligned and the alignment of x should not matter (I think; explicitly aligning x does not solve the problem though). Note also that i use _mm_loadu_pd instead of _mm_load_pd when loading b and f. For the C-only version _mm_load_pd works (as expected). However, when calling the function via ctypes using _mm_load_pd always segfaults (independent of optimisation). I have tried several days to sort out this issue without success ... and I am on the verge beating my monitor to death. Any input welcome. Daniel

  Read the article

• maven test cannot load cross-module resources/properties ?

  - by smallufo

  I have a maven mantained project with some modules . One module contains one XML file and one parsing class. Second module depends on the first module. There is a class that calls the parsing class in the first module , but maven seems cannot test the class in the second module. Maven test reports : java.lang.NullPointerException at java.util.Properties.loadFromXML(Properties.java:851) at foo.firstModule.Parser.<init>(Parser.java:92) at foo.secondModule.Program.<init>(Program.java:84) In "Parser.java" (in the first module) , it uses Properties and InputStream to read/parse an XML file : InputStream xmlStream = getClass().getResourceAsStream("Data.xml"); Properties properties = new Properties(); properties.loadFromXML(xmlStream); The "data.xml" is located in first module's resources/foo/firstModule directory , and it tests OK in the first module. It seems when testing the second module , maven cannot correctly load the Data.xml in the first module . I thought I can solve the problem by using maven-dependency-plugin:unpack to solve it . In the second module's POM file , I add these snippets : <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-dependency-plugin</artifactId> <version>2.1</version> <executions> <execution> <id>data-copying</id> <phase>test-compile</phase> <goals> <goal>unpack</goal> </goals> <configuration> <artifactItems> <artifactItem> <groupId>foo</groupId> <artifactId>firstModule</artifactId> <type>jar</type> <includes>foo/firstModule/Data.xml</includes> <outputDirectory>${project.build.directory}/classes</outputDirectory> </artifactItem> </artifactItems> </configuration> </execution> </executions> </plugin> In this POM file , I try to unpack the first module , and copy the Data.xml to classes/foo/firstModule/ directory , and then run tests. And indeed , it is copied to the right directory , I can find the "Data.xml" file in "target/classes/foo/firstModule" directory. But maven test still complains it cannot read the File (Properties.loadFromXML() throws NPE). I don't know how to solve this problem. I tried other output directory , such as ${project.build.directory}/resources , and ${project.build.directory}/test-classes , but all in vain... Any advices now ? Thanks in advanced. Environments : Maven 2.2.1 , eclipse , m2eclipse

  Read the article

• jQuery tablesorter sorting not working

  - by jknox

  I'm using jQuery tablesorter plugin to generate dynamically a table from a csv file, and that part is working fine. However whenever i try to sort the table by clicking on the table headers, firebug reports this problem in the console: parsers is undefined return parsers[i].type;\n Initially i though this problem was being caused by the table not being ready after the document loads, so i fixed that by manually calling tablesorter() after my table was rendered from the csv file. this didn't fix the issue though. Also, at the very end of the table, the table is drawn garbled with some gray areas at the end. I suppose this is related to the error above. The code in question is this: <html> <head> <link rel="stylesheet" href="blue/style.css" type="text/css" /> <script type="text/javascript" src="jquery-1.3.2.min.js"></script> <script type="text/javascript" src="jquery.tablesorter.js"></script> <script type="text/javascript" src="jquery.csv.js"></script> <script type="text/javascript" id="js"> function sortThis() { $("#myTable").tablesorter({ // sortList:[[0,0],[2,1]] }); }; </script> <title>huh!?</title> </head> <body> <table id="myTable" class="tablesorter" cellspacing="1" cellpadding="0" border="0"> <thead> <tr> <th>name</th> <th>type</th> <th>Date</th> </tr> </thead> <tbody> <script type="text/javascript"> $.get('myfile.csv', function(data) { myfile = jQuery.csv()(data) for (var x = 0; x < myfile.length; x++) { str = "<tr>"; for (var y = 0; y < myfile[x].length; y++) { str += "<td>" + myfile[x][y] + "</td>"; } str += "</tr>"; $('#myTable').append(str); } }); sortThis(); </script> </tbody> </table> </body> </html> Thanks in advance for your help.

  Read the article

• Various problems with software raid1 array built with Samsung 840 Pro SSDs

  - by Andy B

  I am bringing to ServerFault a problem that is tormenting me for 6+ months. I have a CentOS 6 (64bit) server with an md software raid-1 array with 2 x Samsung 840 Pro SSDs (512GB). Problems: Serious write speed problems: root [~]# time dd if=arch.tar.gz of=test4 bs=2M oflag=sync 146+1 records in 146+1 records out 307191761 bytes (307 MB) copied, 23.6788 s, 13.0 MB/s real 0m23.680s user 0m0.000s sys 0m0.932s When doing the above (or any other larger copy) the load spikes to unbelievable values (even over 100) going up from ~ 1. When doing the above I've also noticed very weird iostat results: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 1589.50 0.00 54.00 0.00 13148.00 243.48 0.60 11.17 0.46 2.50 sdb 0.00 1627.50 0.00 16.50 0.00 9524.00 577.21 144.25 1439.33 60.61 100.00 md1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 0.00 1602.00 0.00 12816.00 8.00 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 And it keeps it this way until it actually writes the file to the device (out from swap/cache/memory). The problem is that the second SSD in the array has svctm and await roughly 100 times larger than the second. For some reason the wear is different between the 2 members of the array root [~]# smartctl --attributes /dev/sda | grep -i wear 177 Wear_Leveling_Count 0x0013 094% 094 000 Pre-fail Always - 180 root [~]# smartctl --attributes /dev/sdb | grep -i wear 177 Wear_Leveling_Count 0x0013 070% 070 000 Pre-fail Always - 1005 The first SSD has a wear of 6% while the second SSD has a wear of 30%!! It's like the second SSD in the array works at least 5 times as hard as the first one as proven by the first iteration of iostat (the averages since reboot): Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 10.44 51.06 790.39 125.41 8803.98 1633.11 11.40 0.33 0.37 0.06 5.64 sdb 9.53 58.35 322.37 118.11 4835.59 1633.11 14.69 0.33 0.76 0.29 12.97 md1 0.00 0.00 1.88 1.33 15.07 10.68 8.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 1109.02 173.12 10881.59 1620.39 9.75 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.41 0.01 3.10 0.02 7.42 0.00 0.00 0.00 0.00 What I've tried: I've updated the firmware to DXM05B0Q (following reports of dramatic improvements for 840Ps after this update). I have looked for "hard resetting link" in dmesg to check for cable/backplane issues but nothing. I have checked the alignment and I believe they are aligned correctly (1MB boundary, listing below) I have checked /proc/mdstat and the array is Optimal (second listing below). root [~]# fdisk -ul /dev/sda Disk /dev/sda: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00026d59 Device Boot Start End Blocks Id System /dev/sda1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sda2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sda3 4605952 814106623 404750336 fd Linux raid autodetect root [~]# fdisk -ul /dev/sdb Disk /dev/sdb: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dede Device Boot Start End Blocks Id System /dev/sdb1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sdb2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sdb3 4605952 814106623 404750336 fd Linux raid autodetect /proc/mdstat root # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdb2[1] sda2[0] 204736 blocks super 1.0 [2/2] [UU] md2 : active raid1 sdb3[1] sda3[0] 404750144 blocks super 1.0 [2/2] [UU] md1 : active raid1 sdb1[1] sda1[0] 2096064 blocks super 1.1 [2/2] [UU] unused devices: Running a read test with hdparm root [~]# hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 664 MB in 3.00 seconds = 221.33 MB/sec root [~]# hdparm -t /dev/sdb /dev/sdb: Timing buffered disk reads: 288 MB in 3.01 seconds = 95.77 MB/sec But look what happens if I add --direct root [~]# hdparm --direct -t /dev/sda /dev/sda: Timing O_DIRECT disk reads: 788 MB in 3.01 seconds = 262.08 MB/sec root [~]# hdparm --direct -t /dev/sdb /dev/sdb: Timing O_DIRECT disk reads: 534 MB in 3.02 seconds = 176.90 MB/sec Both tests increase but /dev/sdb doubles while /dev/sda increases maybe 20%. I just don't know what to make of this. As suggested by Mr. Wagner I've done another read test with dd this time and it confirms the hdparm test: root [/home2]# dd if=/dev/sda of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 38.0855 s, 282 MB/s root [/home2]# dd if=/dev/sdb of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 115.24 s, 93.2 MB/s So sda is 3 times faster than sdb. Or maybe sdb is doing also something else besides what sda does. Is there some way to find out if sdb is doing more than what sda does? UPDATE Again, as suggested by Mr. Wagner, I have swapped the 2 SSDs. And as he thought it would happen, the problem moved from sdb to sda. So I guess I'll RMA one of the SSDs. I wonder if the cage might be problematic. What is wrong with this array? Please help!

  Read the article

• How can a single disk in a hardware SATA RAID-10 array bring the entire array to a screeching halt?

  - by Stu Thompson

  Prelude: I'm a code-monkey that's increasingly taken on SysAdmin duties for my small company. My code is our product, and increasingly we provide the same app as SaaS. About 18 months ago I moved our servers from a premium hosting centric vendor to a barebones rack pusher in a tier IV data center. (Literally across the street.) This ment doing much more ourselves--things like networking, storage and monitoring. As part the big move, to replace our leased direct attached storage from the hosting company, I built a 9TB two-node NAS based on SuperMicro chassises, 3ware RAID cards, Ubuntu 10.04, two dozen SATA disks, DRBD and . It's all lovingly documented in three blog posts: Building up & testing a new 9TB SATA RAID10 NFSv4 NAS: Part I, Part II and Part III. We also setup a Cacit monitoring system. Recently we've been adding more and more data points, like SMART values. I could not have done all this without the awesome boffins at ServerFault. It's been a fun and educational experience. My boss is happy (we saved bucket loads of $$$), our customers are happy (storage costs are down), I'm happy (fun, fun, fun). Until yesterday. Outage & Recovery: Some time after lunch we started getting reports of sluggish performance from our application, an on-demand streaming media CMS. About the same time our Cacti monitoring system sent a blizzard of emails. One of the more telling alerts was a graph of iostat await. Performance became so degraded that Pingdom began sending "server down" notifications. The overall load was moderate, there was not traffic spike. After logging onto the application servers, NFS clients of the NAS, I confirmed that just about everything was experiencing highly intermittent and insanely long IO wait times. And once I hopped onto the primary NAS node itself, the same delays were evident when trying to navigate the problem array's file system. Time to fail over, that went well. Within 20 minuts everything was confirmed to be back up and running perfectly. Post-Mortem: After any and all system failures I perform a post-mortem to determine the cause of the failure. First thing I did was ssh back into the box and start reviewing logs. It was offline, completely. Time for a trip to the data center. Hardware reset, backup an and running. In /var/syslog I found this scary looking entry: Nov 15 06:49:44 umbilo smartd[2827]: Device: /dev/twa0 [3ware_disk_00], 6 Currently unreadable (pending) sectors Nov 15 06:49:44 umbilo smartd[2827]: Device: /dev/twa0 [3ware_disk_07], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 171 to 170 Nov 15 06:49:45 umbilo smartd[2827]: Device: /dev/twa0 [3ware_disk_10], 16 Currently unreadable (pending) sectors Nov 15 06:49:45 umbilo smartd[2827]: Device: /dev/twa0 [3ware_disk_10], 4 Offline uncorrectable sectors Nov 15 06:49:45 umbilo smartd[2827]: Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error Nov 15 06:49:45 umbilo smartd[2827]: # 1 Short offline Completed: read failure 90% 6576 3421766910 Nov 15 06:49:45 umbilo smartd[2827]: # 2 Short offline Completed: read failure 90% 6087 3421766910 Nov 15 06:49:45 umbilo smartd[2827]: # 3 Short offline Completed: read failure 10% 5901 656821791 Nov 15 06:49:45 umbilo smartd[2827]: # 4 Short offline Completed: read failure 90% 5818 651637856 Nov 15 06:49:45 umbilo smartd[2827]: So I went to check the Cacti graphs for the disks in the array. Here we see that, yes, disk 7 is slipping away just like syslog says it is. But we also see that disk 8's SMART Read Erros are fluctuating. There are no messages about disk 8 in syslog. More interesting is that the fluctuating values for disk 8 directly correlate to the high IO wait times! My interpretation is that: Disk 8 is experiencing an odd hardware fault that results in intermittent long operation times. Somehow this fault condition on the disk is locking up the entire array Maybe there is a more accurate or correct description, but the net result has been that the one disk is impacting the performance of the whole array. The Question(s) How can a single disk in a hardware SATA RAID-10 array bring the entire array to a screeching halt? Am I being naïve to think that the RAID card should have dealt with this? How can I prevent a single misbehaving disk from impacting the entire array? Am I missing something?

  Read the article

• Foolishness Check: PHP Class finds Class file but not Class in the file.

  - by Daniel Bingham

  I'm at a loss here. I've defined an abstract superclass in one file and a subclass in another. I have required the super-classes file and the stack trace reports to find an include it. However, it then returns an error when it hits the 'extends' line: Fatal error: Class 'HTMLBuilder' not found in View/Markup/HTML/HTML4.01/HTML4_01Builder.php on line 7. I had this working with another class tree that uses factories a moment ago. I just added the builder layer in between the factories and the consumer. The factory layer looked almost exactly the same in terms of includes and dependencies. So that makes me think I must have done something silly that's causes the HTMLBuilder.php file to not be included correctly or interpreted correctly or some such. Here's the full stack trace (paths slightly altered): # Time Memory Function Location 1 0.0001 53904 {main}( ) ../index.php:0 2 0.0002 67600 require_once( 'View/Page.php' ) ../index.php:3 3 0.0003 75444 require_once( 'View/Sections/SectionFactory.php' ) ../Page.php:4 4 0.0003 81152 require_once( 'View/Sections/HTML/HTMLSectionFactory.php' ) ../SectionFactory.php:3 5 0.0004 92108 require_once( 'View/Sections/HTML/HTMLTitlebarSection.php' ) ../HTMLSectionFactory.php:5 6 0.0005 99716 require_once( 'View/Markup/HTML/HTMLBuilder.php' ) ../HTMLTitlebarSection.php:3 7 0.0005 103580 require_once( 'View/Markup/MarkupBuilder.php' ) ../HTMLBuilder.php:3 8 0.0006 124120 require_once( 'View/Markup/HTML/HTML4.01/HTML4_01Builder.php' ) ../MarkupBuilder.php:3 Here's the code in question: Parent class (View/Markup/HTML/HTMLBuilder.php): <?php require_once('View/Markup/MarkupBuilder.php'); abstract class HTMLBuilder extends MarkupBuilder { public abstract function getLink($text, $href); public abstract function getImage($src, $alt); public abstract function getDivision($id, array $classes=NULL, array $children=NULL); public abstract function getParagraph($text, array $classes=NULL, $id=NULL); } ?> Child Class, (View/Markup/HTML/HTML4.01/HTML4_01Builder.php): <?php require_once('HTML4_01Factory.php'); require_once('View/Markup/HTML/HTMLBuilder.php'); class HTML4_01Builder extends HTMLBuilder { private $factory; public function __construct() { $this->factory = new HTML4_01Factory(); } public function getLink($href, $text) { $link = $this->factory->getA(); $link->addAttribute('href', $href); $link->addChild($this->factory->getText($text)); return $link; } public function getImage($src, $alt) { $image = $this->factory->getImg(); $image->addAttribute('src', $src); $image->addAttribute('alt', $alt); return $image; } public function getDivision($id, array $classes=NULL, array $children=NULL) { $div = $this->factory->getDiv(); $div->setID($id); if(!empty($classes)) { $div->addClasses($classes); } if(!empty($children)) { $div->addChildren($children); } return $div; } public function getParagraph($text, array $classes=NULL, $id=NULL) { $p = $this->factory->getP(); $p->addChild($this->factory->getText($text)); if(!empty($classes)) { $p->addClasses($classes); } if(!empty($id)) { $p->setID($id); } return $p; } } ?> I would appreciate any and all ideas. I'm at a complete loss here as to what is going wrong. I'm sure it's something stupid I just can't see...

  Read the article

• Active Directory: trouble adding new DC

  - by ethrbunny

  I have a domain with 3 DCs. One is starting to fail so I brought up a new one. All are running Win 2003. Problem: there appear to be replication issues between the 4 machines but I can't figure out what's causing this. All are registered with the DNS as identically as I can make them. How do I know there is a problem? Nagios is telling me that the other 3 DCs are having KCCEvent errors and the new machine is reporting "failed connectivity" errors. Doing dcdiag on the new machine reports: the host could not be resolved to an IP address. This seems crazy as I log into it using the DNS name. I can ping it from the other three machines using this DNS name as well. repadmin /showreps from the new machine says its seeing the other 3 machines. Doing the same from one of the older machines doesn't show the new machine. I've tried netdiag /repair numerous times. No luck. There are no firewalls running on any of the machines. If I look at Domain info via MMC (on the new machine) it appears that all the information is current. Users, computers, DCs.. its all there. Im puzzled as to what step(s) I've missed in adding this new machine. Suggestions? EDIT: dcdiag from non-working: C:\Documents and Settings\Administrator.BME>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\YELLOW Starting test: Connectivity The host 312ce6ea-7909-4e15-aff6-45c3d1d9a0d9._msdcs.server.edu could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc Although the Guid DNS name (312ce6ea-7909-4e15-aff6-45c3d1d9a0d9._msdcs.server.edu) couldn't be resolved, the server name (yellow.server.edu) resolved to the IP address (10.127.24.79) and was pingable. Check that the IP address is registered correctly with the DNS server. ......................... YELLOW failed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\YELLOW Skipping all tests, because server YELLOW is not responding to directory service requests Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : bme Starting test: CrossRefValidation ......................... bme passed test CrossRefValidation Starting test: CheckSDRefDom ......................... bme passed test CheckSDRefDom Running enterprise tests on : server.edu Starting test: Intersite ......................... server.edu passed test Intersite Starting test: FsmoCheck ......................... server.edu passed test FsmoCheck dcdiag from working: P:\>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\AD1 Starting test: Connectivity ......................... AD1 passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\AD1 Starting test: Replications ......................... AD1 passed test Replications Starting test: NCSecDesc ......................... AD1 passed test NCSecDesc Starting test: NetLogons ......................... AD1 passed test NetLogons Starting test: Advertising ......................... AD1 passed test Advertising Starting test: KnowsOfRoleHolders ......................... AD1 passed test KnowsOfRoleHolders Starting test: RidManager ......................... AD1 passed test RidManager Starting test: MachineAccount ......................... AD1 passed test MachineAccount Starting test: Services ......................... AD1 passed test Services Starting test: ObjectsReplicated ......................... AD1 passed test ObjectsReplicated Starting test: frssysvol ......................... AD1 passed test frssysvol Starting test: frsevent ......................... AD1 passed test frsevent Starting test: kccevent ......................... AD1 passed test kccevent Starting test: systemlog ......................... AD1 passed test systemlog Starting test: VerifyReferences ......................... AD1 passed test VerifyReferences Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : bme Starting test: CrossRefValidation ......................... bme passed test CrossRefValidation Starting test: CheckSDRefDom ......................... bme passed test CheckSDRefDom Running enterprise tests on : server.edu Starting test: Intersite ......................... server.edu passed test Intersite Starting test: FsmoCheck ......................... server.edu passed test FsmoCheck P:\>

  Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >