super mario - Page 171 - Developer IT

win7 amd64 guest in kvm does not have sound

- by davidshen84

hi, my host system is gentoo amd64, guest system is win 7 amd64. the guest system can work, except it does not have sound. i start kvm with -soundhw ac97, QEMU_AUDIO_DRV='alsa', and after i get into the guest system, i can see a 'Multimedia Audio Controller' in the device manager. but win7 cannot find the driver for it. i searched the network for a long time, and i cannot find a driver for intel ac97 for win7 amd64. i also tried -soundhw sb16, es1370, none of them work. please help me fix this.

Read the article

Can't set-up Wifi Adhoc on my Raspberry Pi with an USB dongle

- by Wouter

I am trying to set-up an access point (ad-hoc) for my Raspberry Pi. That means I'm trying to "share" the ethernet connection over Wi-Fi. I am doing this using my Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter. When following a tutorial (or actually every tutorial), it immediately goes wrong. root@pinkypi:/home/pi# iwconfig wlan0 mode ad-hoc Error for wireless request "Set Mode" (8B06) : SET failed on device wlan0 ; Device or resource busy. I already tried ifdown and not having it in the USB port at the startup. If it helps, every action with the thing fail (or at least setting the mode). I am using Debian. I'm sure I'm overseeing something, but I can't find out what. What is wrong?

Read the article

CENTOS 6 - How to install php-mysql when php-common @remi is present?

- by Multitut

I am having troubles adding mysql support for my php installation, this installation was made using a ready to use-package that came with our VPS. This is my php.info: http://snake.quetzalcoatech.com/info.php I am trying to install php mysql using: yum install php-mysql And get this output: Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirrors.serveraxis.net * extras: mirror.fdcservers.net * updates: bay.uchicago.edu Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package php-mysql.x86_64 0:5.3.3-14.el6_3 will be installed --> Processing Dependency: php-common = 5.3.3-14.el6_3 for package: php-mysql-5.3.3-14.el6_3.x86_64 --> Finished Dependency Resolution Error: Package: php-mysql-5.3.3-14.el6_3.x86_64 (updates) Requires: php-common = 5.3.3-14.el6_3 Installed: php-common-5.3.17-2.el6.remi.x86_64 (@remi) php-common = 5.3.17-2.el6.remi Available: php-common-5.3.3-3.el6_2.8.x86_64 (base) php-common = 5.3.3-3.el6_2.8 Available: php-common-5.3.3-14.el6_3.x86_64 (updates) php-common = 5.3.3-14.el6_3 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest I am a noob using Linux, so could you tell me which command should I use to install a compatible php-mysql module? Thank you so much!

Read the article

How to measure disk performance?

- by Jakub Šturc

I am going to "fix" a friend's computer this weekend. By the symptoms he describes it looks like he has a disk performance problem with his 5400 rpm disk. I want to be sure that disk is the problem so I want to "scientificaly" measure the performance. Which tools do you recommend me for this job? Is there any standard set of numbers I can compare the result of measurement with?

Read the article

Expired Windows XP and Safe Mode

- by Sphynx

I thought it's possible to run expired Windows in Safe Mode. However, Windows has expired and I'm getting the following message trying to log-in in SF: "This copy of windows must be activated with Microsoft before you can continue. Because activation cannot occur in safe mode, please restart the computer in normal mode to activate windows.". Does every version of XP behave like that? Is there any way around?

Read the article

Flash Player in Windows 7 X64 problems

- by Flupkear

I'm having a lot of problems with flash player in my win 7 X64 laptop, in YouTube the videos are completely black, you can only hear the sound and in Vimeo the videos are played well in normal size but completely black in fullscreen. Also some days ago YouTube played normal size videos but with controls not visible. I'm sure that the problem isn't the browser since this happen in Chrome, Firefox and IE 8. My laptop is a Dell XPS L501X, the flash version is 10,2,152,26 and the OS is Windows 7 Home Premium with SP1. I'll appreciate any help.

Read the article

How do I view the job queue in lftp after it has moved to a background process?

- by drpfenderson

I've just started using lftp for remote transferring files on my Raspberry Pi running Debian. I know how to transfer the files, and use queue and jobs to add and view transferring files. However, I'm not actually sure on how to view these transfers once lftp moves to the background. The lftp man page mentions how lftp is moving to the background, but when I open a new instance of the program from shell and type jobs, the queue is empty. However, I can clearly see using my file manager that the transfers are still happening, as the files are there and growing in size. I'm guessing that when I reopen lftp, it's just opening a new instance that isn't connected to the nohup mode lftp that has the active queue. I've tried searching various places, but no one else seems to have this particular issue. So, I guess what I'm asking is twofold: Is there a way to easily attach to the background lftp process to view the current jobs list? If not, is there a way to view this at all?

Read the article

Can't change text color in Microsoft Word 2010

- by Wesley

I have Microsoft Office 2010 32-bit running on Windows 7 32-bit. When text is highlighted and a color is selected from the mini-toolbar or the ribbon, the text does not change color. If I change the color for multiple words, and select a different color for each word, the toolbar and ribbon will reflect each of the different colors that I chose, however it is not displayed in the document. So it appears that Word is aware of the text color and not as if it is simply not applying the change. What may be causing this inability to view text colors and how might I fix it? My only troubleshooting attempt so far has been to perform a repair installation of Office. EDIT 1 I created a document, typed a word, selected it and changed the color. I then saved the document as HTML. The text did not change color. This is the HTML in the document: <html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:m="http://schemas.microsoft.com/office/2004/12/omml" xmlns="http://www.w3.org/TR/REC-html40"> <head> <meta http-equiv=Content-Type content="text/html; charset=windows-1252"> <meta name=ProgId content=Word.Document> <meta name=Generator content="Microsoft Word 14"> <meta name=Originator content="Microsoft Word 14"> <link rel=File-List href="Document_1_files/filelist.xml">  <link rel=themeData href="Document_1_files/themedata.thmx"> <link rel=colorSchemeMapping href="Document_1_files/colorschememapping.xml">  <style>  </style>  </head> <body lang=EN-US style='tab-interval:.5in'> <div class=WordSection1> <p class=MsoNormal><o:p> </o:p></p> <p class=MsoNormal><span class=GramE><span style='color:red'>blah</span></span><span style='color:red'><o:p></o:p></span></p> </div> </body> </html> EDIT 2 I recorded a macro and did the following: Typed a word Selected the word Changed the color. Oddly, I had some strange issues while the macro was recorded. I could not select text with my cursor. I had to select the text with control a and then apply the color change. I then couldn't deselect the selected text. Nonetheless, the text showed that it had a different color in the toolbar, but the color did not display in the document. Here's the macro: Sub Change_Text_Color() ' ' Change_Text_Color Macro ' ' Selection.TypeText Text:="Test Text" Selection.WholeStory Selection.WholeStory End Sub EDIT 3 I opened WordPad and created some text and was able to successfully change the color. If I copy and paste the colored text into a Word 2010 document, the color is lost. However, if you place the I-beam in the text and then look at the color selection drop-down menu on the ribbon or mini-toolbar, you can see that the proper color that the text should be in is highlighted. Edit 4 I uninstalled the entire Office 2010 Suite, rebooted and then reinstalled the suite. No change in behavior. Edit 5 Text cannot be colored in Excel either.

Read the article

Display Driver stopped responding and recovered successfully- Blue Screen - HP Elite Book

- by Fahad Saleem

I have HP ELiteBook , this problem has become a routine headache for me (after every 20, 25 minutes_ - While using, suddenly everything hangs and black out goes around and then a message pop at the task bar below that display driver stopped ...and successfully recovered but the hangs and black screen continues and then the Blue Death Screen comes" and then i have no other option but to restart Is this a driver problem ? Hardware problem ? what should I do Please be specific , no stories and theories

Read the article

How practical is using a Wireless-N router together with a B and G router?

- by Jian Lin

I hope to use a Wireless N router to boost up the speed of wireless Internet, but there are some device that probably only supports B or G, such as iPhone, iPad, Wii, so if it is to replace the existing Wireless-B/G router, then some device won't work. Is it practical to buy a Wireless-N router, and then just plug the existing wireless router to it, or if I am using AT&T's u-verse, which has a central Wireless-B/G router, then plug in a new Wireless-N router into it?

Read the article

Logitech MK300 : "no driver found"

- by Oystein

Hi I bought kewyboard and mouse from Logitech. The model is MK300. I wanna run 64-bits Windows 7 with this. When I connect the USB-receiver, Windows is trying to install it but gives me the error message: "no driver found". I tried to download SetPoint 4.80, but that didn't help. I have rebooted the computer several of times, tried different USB'ports, and have allso tried menye different mouses from Logitech. Non of this works. Have someone any suggestions for how I can fix my problem?

Read the article

HISTCONTROL=ignoreboth not working Debian Lenny

- by Mike

Can anybody confirm if by setting the the following environmental variables under debian lenny will make previous history entries not to be saved. GNU bash, version 3.2.39(1)-release export HISTCONTROL=ignoreboth export HISTSIZE=500 I have added them to my /etc/bash.bashrc but I keep getting repeated commands. Thanks

Read the article

award phoenix bios not recognizing my sata hdd.

- by josh

What am I doing wrong? I have a custom built comp with a Fatal1ty AA8XE mobo. It has 4 SATA ports and one IDE port. When i first got it, I had a really hard time putting in more than one hard drive. Right now i have one 120gb IDE HDD on master and my DVD+-RW on slave connected to the one IDE spot on the mobo. I ripped a bunch of movies and filled up my HDD, so I got a WD 80gb SATA drive. I plugged it into SATA1 and hooked up the power, turned on comp, went into bios. The only thing in any option in any of the menues in this crazy lookin bios is a thing that says "SATA mode". i put it on IDE, set it so PATA is primary, SATA is secondary. booted up my comp, nothin. Not recognizing the SATA. I went back into the bios and checked it all again. I saw that it says SATA2 and SATA4 are the secondaries so i put it on SATA2, booted, nothing, same with SATA4, same with SATA3, all same as SATA1. Bios and wt os are not recognizing the drive as being there at all. I even downloaded and printed the almost 100 page manual for the mobo, read the entire thing, and still can't figure it out. I know there are a lot of people out there smarter than me when it comes to computers. So please, somebody, anybody, please tell me something that I'm not seeing. Some setting somewhere that I didn't configure right. There is something, obviously, but I can't find it. As far as i can tell, everything is set perfectly fine for my 120gb to be the master and the SATA to be the slave. I don't know what I'm doing wrong but I'm seriously about to throw this computer out the window. thankyou in advance to whoever attempts to help.

Read the article

sudo apt-get moo and other easter eggs in Linux

- by Arkapravo

I came across this command while dabbling in Ubuntu 9.10: sudo get-apt moo acer@acer:~$ sudo apt-get moo (__) (oo) /------\/ / | || * /\---/\ ~~ ~~ ...."Have you mooed today?"... Which most surprisingly "made a MOO". (How unfortunate for the cows). Does anyone else know of funny command line easter eggs in their flavour of Linux (Fedora, Slackwire, Mandriva, Solaris, Suse, etc)?

Read the article

How to configure a Router (TL-WR1043ND) to work in WDS mode?

- by LanceBaynes

I have a WRT160NL router (192.168.1.0/24 - OpenWrt 10.04) as AP. It's: - WAN port: connected to the ISP - WLAN: working as an AP, using 64 bit WEP/SSID: "MYWORKINGSSID", channel 5, using password: "MYPASSWORDHERE" - It's IP Address is: 192.168.1.1 Ok! It's working great! But: I have a TL-WR1043ND router that I want to configure as a "WDS". (My purpose is to extend the wireless range of the original WRT160NL.) Here is how I configure the TL-WR1043ND: 1) I enable WDS bridging. 2) In the "Survey" I select my already working network. 3) I set up the encryption (exact same like the already working one) 4) I choose channel 5 5) I type the SSID 6) I disable the DHCP server on it. After I reboot the router and connect to this router (TL-WR1043ND) over wireless I'm trying to ping google.com. From the ping I see that I can reach this router, that's ok, but it seems like that this router can't connect to the original one, the WRT160NL (so I don't get ping reply from Google). The encryption settings/password is good I checked it many-many-many times. what could be the problem? I'm thinking it could be a routing problem, but what should I add to the "Static Routing" menu? I tried to change the IP address of the TL-WR1043ND to: 192.168.1.2 So if this a routing issue then I should add a static routing rule that says: If destination: any then forward the packet to 192.168.1.1 p.s.: I updated the Firmware to the latest version. It's still the same. p.s.2: The HW version of the TL-WR1043ND is 1.8 p.s.3: Could that be the problem that I use different routers? (If I would buy.. another TL-WR1043ND and use it instead of the WRT160NL, and with normal Firmware, not OpenWrt, then it would work?? The "WDS" is different on different routers?) p.s.4: I will try to check the router logs@night - and paste it here! :\

Read the article

Time machine not recognizing sparsebundle

- by Tom

I've created a sparsebundle just as suggested at http://www.readynas.com/?p=253; however, Time Machine fails to recognize the mounted image. The sparseimage is stored on an external drive, and I already executed: defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1 I have also verified that the naming format of the sparsebundle is: MachineName_.sparsebundle. I'm running the latest version of Snow Leopard (10.6.7).

Read the article

Beep code for Dell Poweredge T105

- by Thomas

I can't start my Poweredge T-105 just after two years. It does not display any on monitor but blue lights on 3 & 4 of system case. And it repeatedly beeps. At first, it beeps 1-3-3 and then repeats 1-1-3-4. As far as I can search on the net, Dell's beep code is 3 digit. So do I have to consider the beep code for my error is 1-3-3? Unfortunately, my warranty expired last year so any hint will be appreciated.

Read the article

Fastest SFTP client

- by Stan

Protocol: SFTP (port 22) I've tested CuteFtp, FileZilla, SecureCRT and several others. Looks like CuteFTP has the best throughput, usually 200%-400% than others. I've read something about SecureFtp may have slower rate from here. Can anyone explain why CuteFtp has better throughput? And, is there any other FTP client even faster than CuteFtp? Thanks a lot!

Read the article

Audio doesn't work on Windows XP guest (WS 7.0)

- by Mads

I can't get audio to work with on a Windows XP guest running on VMware Workstation 7.0 and Ubuntu 9.10 host. Windows fails to produce any audio output and the Windows device manager says the Multimedia Audio Controller is not working properly. Audio is working fine in the host OS. When I open Multimedia Audio Controller properties it says: Device status: The drivers for this device are not installed (Code 28) If I try to reinstall the driver I get the following error message: Cannot Install this Hardware There was a problem installing this hardware: Multimedia Audio Controller An Error occurred during the installation of the device Driver is not intended for this platform Has anyone else experienced this problem?

Read the article

How to set a key combination as a browser toolbar shortcut?

- by Ian Campbell

For example, I so often clear my browser history with CTRL+SHIFT+DEL. While this is easy enough, I'd like to take it a step further and have a shortcut in my browser's toolbar that when clicked executes the above-mentioned key combination, something like this: Is this directly possible, or would it require creating a plugin? If it would require creating a plugin, how might that be done? p.s. — I'm using Firefox, but it would be awesome if there was a browser-independent solution.

Read the article

How to set the default file permissions on ALL newly created files in linux

- by eviljack

My question is similar to this: http://stackoverflow.com/questions/228534/linux-default-file-permission but there is no scp/ftp client involved and that question looks abandoned. Simply put: I want to be able to, at some global level decree that all newly created files will never have world writable permissions (0775). I tried putting a umask 02 in /etc/profile then in my bash_profile but it only works for scripts or new files that I create in a shell. It doesn't work for files that another binary creates. Is there anyway to have all new files that are created?

Read the article

WAMP vhost issues with all vhost pointing to the first vhost statement

- by Rick

I am trying to setup vhosts in WAMPSERVER and I am running into an issue where all sites are pointing to the first vhosts and not delegating properly. Has anyone had this issue? Here is my setup. In windows hosts file: 127.0.0.1 siteabc.local 127.0.0.1 sitexyz.local In httpd-vhosts.conf: <VirtualHost 127.0.0.1> DocumentRoot "C:\Users\Rick\Documents\Projects\siteabc" ServerName siteabc.local ErrorLog "logs/siteabc-error.log" CustomLog "logs/siteabc-access.log" common <Directory "C:\Users\Rick\Documents\Projects\siteabc"> Options Indexes FollowSymLinks AllowOverride all Order Deny,Allow Allow from all </Directory> </VirtualHost> <VirtualHost 127.0.0.1> DocumentRoot "C:\Users\Rick\Documents\Projects\sitexyz" ServerName sitexyz.local ErrorLog "logs/sitexyz-error.log" CustomLog "logs/sitexyz-access.log" common <Directory "C:\Users\Rick\Documents\Projects\sitexyz"> Options Indexes FollowSymLinks AllowOverride all Order Deny,Allow Allow from all </Directory> </VirtualHost> <VirtualHost 127.0.0.1> DocumentRoot "C:\Users\Rick\Documents\Projects" ServerName localhost ErrorLog "logs/localhost-error.log" CustomLog "logs/localhost-access.log" common <Directory "C:\Users\Rick\Documents\Projects"> Options Indexes FollowSymLinks AllowOverride all Order Deny,Allow Allow from all </Directory> </VirtualHost> Ok so from this setup going to siteabc works...but going to sitexyz, it still goes to siteabc. Not sure what I did wrong here. Thanks for looking.

Read the article

How to fix corrupted filesystem (shows as RAW) in USB device?

- by Erico Yan

I would like to ask if you know how to fix a corrupted USB? I've tried the diskpart command but it didn't work. The media is write protected. Do you have any idea that is much better? I need to fix it because I have important files in my flash drive. I really need to retrieve it. I saw that the file system is seen as RAW and is unaccessible. I tried error checking, but it requires you to format it. I tried data recovery software but all files come out corrupted. My USB is Imation 4GB. Any suggestions?

Read the article

ManicTime Alternative for Mac OS X

- by Calcgod

Is there software like ManicTime for Windows that can track of everything I do in Mac OS X?

Read the article

How do I get Windows 7 To Recognize a newly installed RAID 5 volume?

- by GregH

I had a previously running Windows 7 (64 bit) system. I added 3 new 1TB Seagate drives that I set up as a RAID 5 volume. I have a Gigabyte GA-P55M-UD2 motherboard. I installed the drives, set up the BIOS and configured the three drives as a RAID volume through the RAID setup utility that was accessed via Ctrl-I while the system was booting. I rebooted the system and could see the drives during the boot sequence. However, when Windows 7 was starting I got an error (quick blue screen) and then Windows tried to repair itself with no success. Do I need to install RAID drivers in Windows? How do I do it if Windows won't boot? Thanks in advance.

Search Results

Search found 46079 results on 1844 pages for 'super mario'.

Page 171/1844 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178 | Next Page >

- by davidshen84

- by Wouter

- by Multitut

- by Jakub Šturc

- by Sphynx

- by Flupkear

- by drpfenderson

- by Wesley

- by Fahad Saleem

- by Jian Lin

- by Oystein

- by Mike

- by josh

- by Arkapravo

- by LanceBaynes

- by Tom

- by Thomas

- by Stan

- by Mads

- by Ian Campbell

- by eviljack

- by Rick

- by Erico Yan

- by Calcgod

- by GregH

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178 | Next Page >