Search Results

Search found 14951 results on 599 pages for 'connect by'.

Page 172/599 | < Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >

• FreeBSD high load loopback interface

  - by user1740915

  I have a problem with a FreeBSD server. There is a FreeBSD 9.0 amd64, two network cards em1 (internet), em0 (local network) configured firewall ipfw, natd, squid (not transparent), the server acts as a gateway for access to the Internet. Next problem: upload via squid is very low. At this moment I see next: natd, dhcpd load the cpu at that time when uploading through squid and there are a lot of traffic through the loopback interface. ipfw show output 0100 655389684 36707144666 allow ip from any to any via lo0 00200 0 0 deny ip from any to 127.0.0.0/8 00300 0 0 deny ip from 127.0.0.0/8 to any 00400 0 0 deny ip from any to ::1 00500 0 0 deny ip from ::1 to any 00600 4 292 allow ipv6-icmp from :: to ff02::/16 00700 0 0 allow ipv6-icmp from fe80::/10 to fe80::/10 00800 1 76 allow ipv6-icmp from fe80::/10 to ff02::/16 00900 0 0 allow ipv6-icmp from any to any ip6 icmp6types 1 01000 0 0 allow ipv6-icmp from any to any ip6 icmp6types 2,135,136 01100 1615 76160 deny ip from 192.168.1.1 to any in via em1 01200 0 0 deny ip from 199.69.99.11 to any in via em0 01300 46652 3705426 deny ip from any to 172.16.0.0/12 via em1 01400 3936404 345618870 deny ip from any to 192.168.0.0/16 via em1 01500 4 336 deny ip from any to 0.0.0.0/8 via em1 01600 4129 387621 deny ip from any to 169.254.0.0/16 via em1 01700 0 0 deny ip from any to 192.0.2.0/24 via em1 01800 917566 33777571 deny ip from any to 224.0.0.0/4 via em1 01900 147872 22029252 deny ip from any to 240.0.0.0/4 via em1 02000 1132194739 1190981955947 divert 8668 ip4 from any to any via em1 02100 3 248 deny ip from 172.16.0.0/12 to any via em1 02200 35925 2281289 deny ip from 192.168.0.0/16 to any via em1 02300 1808 122494 deny ip from 0.0.0.0/8 to any via em1 02400 3 174 deny ip from 169.254.0.0/16 to any via em1 02500 0 0 deny ip from 192.0.2.0/24 to any via em1 02600 0 0 deny ip from 224.0.0.0/4 to any via em1 02700 0 0 deny ip from 240.0.0.0/4 to any via em1 02800 960156249 1095316736582 allow tcp from any to any established 02900 64236062 8243196577 allow ip from any to any frag 03000 34 1756 allow tcp from any to me dst-port 25 setup 03100 193 11580 allow tcp from any to me dst-port 53 setup 03200 63 4222 allow udp from any to me dst-port 53 03300 64 8350 allow udp from me 53 to any 03400 417 24140 allow tcp from any to me dst-port 80 setup 03500 211 10472 allow ip from any to me dst-port 3389 setup 05300 77 4488 allow ip from any to me dst-port 1723 setup 05400 3 156 allow ip from any to me dst-port 8443 setup 05500 9882 590596 allow tcp from any to me dst-port 22 setup 05600 1 60 allow ip from any to me dst-port 2000 setup 05700 0 0 allow ip from any to me dst-port 2201 setup 07400 4241779 216690096 deny log logamount 1000 ip4 from any to any in via em1 setup proto tcp 07500 21135656 1048824936 allow tcp from any to any setup 07600 474447 35298081 allow udp from me to any dst-port 53 keep-state 07700 532 40612 allow udp from me to any dst-port 123 keep-state 65535 1990638432 1122305322718 allow ip from any to any systat -ifstat when uploading via squid Load Average ||| Interface Traffic Peak Total tun0 in 79.507 KB/s 232.479 KB/s 42.314 GB out 2.022 MB/s 2.424 MB/s 59.662 GB lo0 in 4.450 MB/s 4.450 MB/s 43.723 GB out 4.450 MB/s 4.450 MB/s 43.723 GB em1 in 2.629 MB/s 2.982 MB/s 464.533 GB out 2.493 MB/s 2.875 MB/s 484.673 GB em0 in 240.458 KB/s 296.941 KB/s 442.368 GB out 512.508 KB/s 850.857 KB/s 416.122 GB top output PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 66885 root 1 92 0 26672K 2784K CPU3 3 528:43 65.48% natd 9160 dhcpd 1 45 0 31032K 9280K CPU1 1 7:40 32.96% dhcpd 66455 root 1 20 0 18344K 2856K select 1 119:27 1.37% openvpn 16043 squid 1 20 0 44404K 17884K kqread 2 0:22 0.29% squid squid.conf cat /usr/local/etc/squid/squid.conf # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl localnet src 10.0.0.0/8 # RFC1918 possible internal network acl localnet src 172.16.0.0/12 # RFC1918 possible internal network acl localnet src 192.168.0.0/16 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port 192.168.1.1:3128 # Uncomment and adjust the following to add a disk cache directory. #cache_dir ufs /var/squid/cache 100 16 256 # Leave coredumps in the first cache dir coredump_dir /var/squid/cache I understand that the traffic passes through the SQUID several times. But can not find why.

  Read the article

• Windows Server 2003 AD User Properties Environment doesn't override end user Remote Desktop Client s

  - by caleban

  Windows Server 2003 Domain Controller and Windows XP workstations: Active Directory Users and Computers/Users/User/Properties/Environment/Client devices Connect client drives at logon Connect client printers at logon Shouldn't the above Terminal Services settings in Active Directory override the end user Remote Desktop client settings? In our environment the end user Remote Desktop Client settings take precedence. If printing is disabled on the client but enabled in the user's AD profile then printing is not available. Is this working by design or can I change something to allow the user environment settings in AD to override the end user settings RDC settings?

  Read the article

• How to design a scriptable communication emulator?

  - by Hawk

  Requirement: We need a tool that simulates a hardware device that communicates via RS232 or TCP/IP to allow us to test our main application which will communicate with the device. Current flow: User loads script Parse script into commands User runs script Execute commands Script / commands (simplified for discussion): Connect RS232 = RS232ConnectCommand Connect TCP/IP = TcpIpConnectCommand Send data = SendCommand Receive data = ReceiveCommand Disconnect = DisconnectCommand All commands implement the ICommand interface. The command runner simply executes a sequence of ICommand implementations sequentially thus ICommand must have an Execute exposure, pseudo code: void Execute(ICommunicator context) The Execute method takes a context argument which allows the command implementations to execute what they need to do. For instance SendCommand will call context.Send, etc. The problem RS232ConnectCommand and TcpIpConnectCommand needs to instantiate the context to be used by subsequent commands. How do you handle this elegantly? Solution 1: Change ICommand Execute method to: ICommunicator Execute(ICommunicator context) While it will work it seems like a code smell. All commands now need to return the context which for all commands except the connection ones will be the same context that is passed in. Solution 2: Create an ICommunicatorWrapper (ICommunicationBroker?) which follows the decorator pattern and decorates ICommunicator. It introduces a new exposure: void SetCommunicator(ICommunicator communicator) And ICommand is changed to use the wrapper: void Execute(ICommunicationWrapper context) Seems like a cleaner solution. Question Is this a good design? Am I on the right track?

  Read the article

• Login Failed For User PCname/Guest

  - by sml

  I'm getting this error message while I'm trying to connect a sql 2008 database which is in another computer.

  Read the article

• Authenticating a Windows client to a Samba share

  - by hekevintran

  I have a Samba network share being served by a Linux machine. The share is read-only unless you give it a username and password. I want my Windows 7 client machine to connect to it. It appears that the Windows machine is connecting as a guest because it does not have write access. The Windows machine never asks me whether or not it should connect as a guest or with a username. How do I make the Windows machine authenticate? Where do I input my password? This seems like such a simple thing yet I am totally confused. On Mac OS and Linux, it simply asks you for a username.

  Read the article

• Remote connection to dynamic public ip & private ip addresses

  - by user53864

  Many times I connected to windows computer which has static public ip address via remote desktop over wan links. I'm wondering how could I connect to the remote computer that has dynamic public ip address & private ip addresses assigned. I've 2 systems at home: xp system-------connected to internet(dynamic public ip) & allowed other users to connected to the internet on the interface. windows vista system--------enabled dhcp on the interface to access internet from xp. How could I remotely connect from my office to the 'vista system'?. If I've a router/modem at my home it may be possible to allow the ports for the system but I don't. Any tips?

  Read the article

• Cisco ASA SSL VPN options?

  - by JonH

  Disclaimer: I am not a network admin so I may be wrong here but I thought asking here would help. I'm a developer mainly on the .net framework as well as helping get a mobile intranet app working. Because this app is only allowed to be used on our network I can easily run this app on our wireless network connection within our building. All is fine and dandy but we'd also like to be able to run this mobile app at say a customer plant using VPN software. I thought surely this could be easy as we exclusively use Samsung s4 phones so I thought I'd download Cisco's Samsung any connect software to allow us to VPN...its right on the play store. Sure enough it doesn't work. I mention it to our network admin who says not possible since we have old technology that doesn't support SSL. He mentions we'd have to upgrade all of our hardware, the firewall, etc. to get this to work. We really need VPN on our phones not only for this app but other internal apps, etc. He did mention the following: We can’t upgrade the software on our ASA, because we don’t have enough memory for the new version.  (the asa is very old).  We can’t add more memory, so we would have to get a new firewall, which I have been told I cannot do. In addition he also mentioned: The Samsung AnyConnect client uses SSL to connect.  With the current (old) version of software that our firewall is running, the SSL connections are unreliable.  We need different hardware in order to upgrade our firewall, which we are unable to attain at this time.  This is the same reason that Windows 8 clients are not able to connect. I am curious hence me asking. vpns seem to be fairly simple to setup. What other options do I have aside from making this a public site or web service that consumes this data over the internet as this is a complete no no. What can we do to make this work without that much effort or cost.

  Read the article

• FTP issue - VSFTPd and connecting to from FileZilla

  - by B Tyndall

  I'm trying to connect to a CentOS Linux box that I have hosted on EC2 and I think I have everything configured correctly but when I try to connect I get this series of messages Status: Connection established, waiting for welcome message... Response: 220 (vsFTPd 2.0.5) Command: USER tyndall Response: 331 Please specify the password. Command: PASS ********* Response: 230 Login successful. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/home/tyndall" Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Error: Connection timed out Error: Failed to retrieve directory listing Not sure where to start troubleshooting this issue. Any ideas? Do I need to change any permissions? I would think this ID has the ability to see my own home directory. I am able to push/pull files from the command line version of FTP client working on Windows.

  Read the article

• Cannot authenticate to SBS 2003

  - by Lerp

  I am trying to connect my machine to my work's entirely windows network and I am having a few issues: Whenever I try to access the server, the authentication dialog just keeps popping back up. I cannot connect to the printers (it says connecting to device failed) I have tried setting up samba, winbind, kerberos, likewise open all to no avail. I have a feeling I am just setting them up wrong. My nautilus shows this when I go to Network Windows Network MASTERMAGNETS I can ping both MASTERMAGNETS.LOCAL and 192.168.0.2 after modifying my /etc/hosts james@jamesmaddison:~$ cat /etc/hosts 127.0.0.1 localhost jamesmaddison 192.168.0.2 MASTERMAGNETS.LOCAL 192.168.0.50 Sharp-Printer # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters I believe that's the correct domain (not sure if that's the correct term) as when I do nslookup MASTERMAGNETS.LOCAL I get the following: james@jamesmaddison:~$ nslookup MASTERMAGNETS.LOCAL Server: 192.168.0.2 Address: 192.168.0.2#53 Name: MASTERMAGNETS.LOCAL Address: 192.168.0.3 Name: MASTERMAGNETS.LOCAL Address: 192.168.0.2 It all worked fine before I reinstalled Ubuntu and now I just cannot get access to the server. All help is appreciated, I need to get this working or I fear I will be forced to develop in a windows environment :(

  Read the article

• How to reset a Fritz!Box DSL router to factory settings?

  - by damluar

  I need to change the setting of router Fritz Box. The setting were set by another person. I can't connect to router using cable, may be standard port or address were changed. So the only option is to switch to factory settings. Usually there is a button which deletes all the settings. I read the documentation and they tell to call the number #991*15901590* on the router. Do I have to connect telephone to router?

  Read the article

• Clients with multiple proxy and multithreading callbacks

  - by enzom83

  I created a sessionful web service using WCF, and in particular I used the NetTcpBinding binding. In addition to methods to initiate and terminate a session, other methods allow the client to send to one or more tasks to be performed (the results are returned via callback, so the service is duplex), but they also allow you to know the status of the service. Assuming you activate the same service on multiple endpoints, and assuming that the client knows these endpoints (for example, it could maintain a List of endpoints), the client should connect with one or more replicas of the same service. The client periodically updates the status of the service, so when it needs to perform a new task (the task is submitted by the user via UI), it selects the service currently less loaded and sends the task to it. Periodically, the client also initiates a maintenance procedure in order to disconnect from one or more overloaded service and in order to connect with new services. I created a client proxy using the svcutil tool. I wish each proxy can be used simultaneously by different threads, for example, in addition to the thread that submits the tasks using a proxy, there are also the following two threads which act periodically: a thread that periodically sends a request to the service in order to obtain the updated state; a thread that periodically selects a proxy to close and instantiates a new proxy to replace the closed one. To achieve these objectives, is it sufficient to create an array of proxies and manage their opening and closing in separate threads? I think I read that the proxy method calls are thread safe, so I would not need to perform a lock before requesting updates to the service. However, when the maintenance procedure (which is activated on its own thread) decides to close a proxy, should I perform a lock? Finally, each proxy is also associated with an object that implements the callback interface for the service: are the callbacks (invoked on the client) executed on different threads on the client? I would like to wrap the management of the proxy in one or more classes so that it can then easily manage within a WPF application.

  Read the article

• Why does WebDAV fail from inside home network

  - by Claus

  On my OSX server there is a folder that is configured in the Server App to be accessible via WebDAV. This folder is used to sync OmniFocus. On my router, I have set up a dynamic dns. When I am outside my home network (physically away or when connected via a vpn), I can connect and sync fine via: https://<server name from dyndns>/<username>/<path to WebDAV folder> However, when I am in my home network, the connection to WebDAV does not work (other connections, AFP, f.ex, do work). What could be some reasons why I can't connect to WebDAV from within my home network? What log files could give hints and where are they stored? I am running OSX server 10.9.3. and server.app. Thanks for your help.

  Read the article

• Can only see part of the screen when connecting via NX, how can I control NX size?

  - by Oak

  I'm using NoMachine's NX client on OSX 10.7.2 to connect to an NX server running on Ubuntu 10.04.3. I've chosen the Gnome desktop during the connection creation. The NX screen that opens is smaller than the Gnome screen running "behind" it it looks like it's 1024x768, while the screen "behind" it looks to be running 1680x1050. The result is naturally very inconvenient (e.g. can't see the taskbar, can't click lower options in popup menus, etc.). In the past I've used NX client successfully to connect and see the entire screen. Resizing the NX window only resizes the transferred image, but does not let me see more of the Gnome desktop. Playing with the NX client display options also does the same. How can I control the size of the NX client, and make it show the entire Gnome desktop?

  Read the article

• Use Windows Briefcase from the command line

  - by Daniel

  I have a thumb drive on which I take many of my files with me. I would like to synchronize it with my computer automatically when I connect it. I currently have a script run every time I connect it so that I can do the many things that need to be done when it connects (check for updates to the portable applications, etc.). I want my synchronization utility to: Detect conflicts work correctly when I move files or change the folder structure tell the difference between a file that was deleted on one side and a file that was added on the other work from the command line or at least have a command that will open up a window provide a confirmation screen before doing anything The Windows Briefcase does all of these except the command line. Is there any program that does all of these, or is there a way to synchronize the briefcase from the command line?

  Read the article

• Management VLAN Cisco Catalyst

  - by cha789

  I have configured a couple of VLANs on a Cisco Catalyst switch, i will put all the ports that clients is connected to, into these VLANs. I want to configure the native VLAN [vlan 1] as management VLAN so i can use a telnet client to connect to the switch. How can i block all but one specific IP-address to telnet into the switch? As i understand vlan 1 has many task regarding different protocols and i do not want to break that but only allow one specific IP-address to connect to the switch with a telnet client [actually the gateway ip address of the switch].

  Read the article

• VPN, routing, specified application

  - by Adrian

  Details: eth0 = current internet port pptp1 = VPN connection, if I connect to my provider, he give me an IP address, which is accessible from the internet. This is what I need. I want to connect through this IP back to my PC. I want to keep my primary internet connection (eth0) on my PC for all traffic, but route traffic to VPN for specified application/or port, to access application/port from the IP, which I given from the pptp provider. Huhh? Difficult but, it is possible? If yes, how? Incoming port will be always: 33340 Outgoing port can be change, but usually it is 33330

  Read the article

• Nobody nogroup on ubuntu client with Solaris server

  - by user1574623

  I have an openIdiana server with ZFS and it has been shared with NFS on a ubuntu server (called server1) one year ago. Now i am asked to shared it on a second ubuntu server (called server2). So i have took the line in /etc/fstab from server 1 and add it in server2: 192.168.1.22:mypool/data/.zfs/snapshot /mnt/zfs nfs acl,intr,noatime 0 0 But when i mount it, the rights on server2 are "nobody nogroup" (connect as anonymous?!) whereas its ok on server1. And on my OpenIndiana, I haven't found where it is configured (its not me who configured it last year). So I have tried to set zfs set sharenfs=rw numpool/data but without success. So i am looking for a file like /etc/exports on Ubuntu to configure which server is allowed to connect, and not as anonymous. Any idea? thanks,

  Read the article

• Does an unmanaged 4/8-port GBit Ethernet switch with a GBIC port exist?

  - by Aaron Digulla

  I'm looking for a simple unmanaged switch with 4-8 GBit Ethernet ports and a fiber port (either as a GBIC slot or pre-installed with a 1000BASE-SX port). Does something like that exist? [EDIT] I want to connect to places in my home without drilling large holes though the floors. Therefore, I'm looking for a cheap way to connect two GBit switches via fiber. I tried with a media converter (GBit <- multimode fiber) but that costs about 50% throughput. So I was hoping that there is a cheap, small GBit switch which has a GBIC slot). All I found so far are very expensive managed switches with 12 or 24 ports for industry use.

  Read the article

• Remote support via VPN without split tunnel

  - by Robe Eleckers

  my title might not be very clear, but I'll explain my setup in more detail now. We have several customers (companies) that need to be remotely supported. At these customers we have servers running with our software that needs to be serviced. These servers are (almost) never connected to the internet. For this we have multiple PC's running VPN clients. These PC's run a VNC server so our service engineers can login from their home laptop remotely to these PC's and connect from there to our customer via the VPN connection on the PC. The problem is however that several customers do not allow split tunneling. That means that when we connect via VPN to such a customer the VNC connection drops. Our current workaround is using a Citrix VM which we control via XenCenter console, but it's quite slow. Are there common solutions to handle this?

  Read the article

• Credentials work for SSMS but not (ODBC) LogParser script

  - by justSteve

  Via SSMS I'm able to connect and navigate the server/db in question. but trying to connect via a logparser script the same credentials fail. I'm trying to execute this from the same box on which the server's running. the username is owner/dbo of the db. The db has mixed mode authentication. [linebreaks for clarity] C:\TTS\tools\LogParserc:\tts\tools\logparser\logparser file:c:\tts\tools\logparser\errors2SQL.sql?source="C:\inetpub\logs\LogFiles\W3SVC8\u_ex100521.log" -i:IISW3C -o:SQL -createTable:ON -oConnString:"Driver={SQL Server Native Client 10.0};Server=servername\SQLEXPRESS;db=Tter;uid=logger2;pwd=foo" -stats:OFF Task aborted. Error connecting to ODBC Server SQL State: 28000 Native Error: 18456 Error Message: [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'logger2'. C:\TTS\tools\LogParser

  Read the article

• MySQL - allow connection from remote machine as root user

  - by Senthil Kumar

  Hi all, When I installed MySQL server in Windows, there was an option "Allow root connection from remote machine". I checked that option and I had no probs when using it. I installed MySQL server in Ubuntu 9.04 using apt-get install. I can connect to the sql server from the same machine but when I try to connect from a virtual machine, it doesn't work. My guess is that I should allow root connection from remote machine. How to do that?

  Read the article

• Ubuntu 11.04 and OpenLDAP - where is the config?

  - by Tom SKelley

  I've been asked to setup a multimaster LDAP environment on Ubuntu 11.04 - instead of a single master server. I cloned the master server and recreated it into two VMs. I am trying to follow the instructions on the OpenLDAP documentation here: http://www.openldap.org/doc/admin24/replication.html and it talks about modifying the cn=config tree within LDAP. The subdirectory tree appears to be there at: /etc/ldap/slapd.d/ and a slapcat -b cn=config drops out a load of config information. When I try to connect using a browser and the admin bind credentials: ldapsearch -D '<adminDN>' -w <password> -b 'cn=config' I get: # extended LDIF # # LDAPv3 # base <> (default) with scope subtree # filter: (objectclass=*) # requesting: ALL # # search result search: 2 result: 32 No such object I don't see the config context when I connect via an LDAP browser either. I'm sure I'm missing something, but I can't see what it is!

  Read the article

• Snow Leopard connecting to Unbuntu 10.04 through Samba failure -- need help fixing.

  - by Chris Altman

  I have a Ubuntu 10.04 web server. I want to connect to it with my OSX 10.6 machine and Finder. I have installed openSSH and Samba on the Ubuntu machine. In my smb.conf I have a Share Definition: [www] comment = Development Computer WWW path = /var/www writeable = yes browseable = yes allow hosts = 192.168.1. I can connect to the machine through Finder using a non-root user. When I attempt to add files thought Finder I get an "Insufficient Permissions" error. Please help. I am not sure if the issue is in the Samba configuration or OSX 10.6 Thank you

  Read the article

• Internet keeps getting Disconnected & Reconnected

  - by Paul

  I have an Internet connection thru a Phone company which uses DSL modem to connect. For past few weeks my net connection keeps getting disconnected for few seconds & it reconnects automatically. I asked the service provider & they checked & even replaced some wires but of no help. Funny thing is that sometimes there seems to be a rhythm where it disconnects for an average of 13 seconds or so plus or minus few seconds, for hours at a time. I don't know how to attach an image to this post where it shows the pattern of connect & disconnect. I have taken an image using snagit to show the timing pattern. If someone can explain it, I can attach it here. Thanks

  Read the article

• Another guvcview issue? Core dump!

  - by user290498

  guvcview is core dumping with my Sony Handycam plugged in. It works fine with my standard Logitech Webcam. I deleted the config file so it could re-create it. here is the output: $ guvcview guvcview 1.5.3 Could not open /home/rayj/.guvcviewrc for read, will try to create it write /home/rayj/.guvcviewrc OK ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 ERROR opening V4L2 interface for /dev/video1 Init. stk1160 (location: usb-0000:00:1d.0-1.5) { pixelformat = 'UYVY', description = '16 bpp YUY2, 4:2:2, packed' } VIDIOC_ENUM_FRAMESIZES - Error enumerating frame sizes: Inappropriate ioctl for device Unable to enumerate frame sizes. : Inappropriate ioctl for device { pixelformat = 'RGB3', description = 'RGB3' } { ?GSPCA? : width = 720, height = 480 } fmtind:2 fsizeind: 1 { pixelformat = 'BGR3', description = 'BGR3' } { ?GSPCA? : width = 720, height = 480 } fmtind:3 fsizeind: 1 { pixelformat = 'YU12', description = 'YU12' } { ?GSPCA? : width = 720, height = 480 } fmtind:4 fsizeind: 1 { pixelformat = 'YV12', description = 'YV12' } { ?GSPCA? : width = 720, height = 480 } fmtind:5 fsizeind: 1 vid:05e1 pid:0408 driver:stk1160 checking format: 1196444237 Format unavailable: 1196444237. Init v4L2 failed !! Init video returned -2 trying minimum setup ... Segmentation fault (core dumped)

  Read the article

< Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >