Search Results

Search found 25123 results on 1005 pages for 'domain model'.

Page 172/1005 | < Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >

  • Help find correct alsa model for onboard sound (alc887?) that will work with jack and have correct mixer setup

    - by Jazz
    I have a Gigabyte GA-MA74GMT-S2 motherboard. I am using Jack for sound - connected to ALSA. I am running Ubuntu 12.04. aplay -l reports card 0: SB [HDA ATI SB], device 0: ALC887 Analog [ALC887 Analog] The problem is that the default setup, that alsa decides to use, causes stuttering and xruns no matter how generous I set the frames/period or periods/buffer etc. Also, Jack works fine if I plug in an external USB sound system and use that. My processor is an AMD phenom x4 945, and I have 8GB ram, and Video card is Geforce GTX550 Ti, all of which should be quite capable enough. I also tried Pulseaudio and that works fine, but I need to use Jack At first I thought it might be an interrupt conflict, but I have found that adding "options snd-hda-intel model=generic" to /etc/modprobe.d/alsa-base.conf causes it to play correctly, but the limited mixer setup lacks controls I need - so this setup isn't good enough. Still, it seems to prove it isn't a hardware conflict. I have tried many other models, such as 3stack, 6stack, auto and even basic, and they all suffer from the stuttering. I eventually found "options snd-hda-intel model=3stack-6ch-intel" works without stuttering, and mixer is much closer to what it needs to be. Can anyone help on how to get a correct and accurate model for ALSA to use? More info on the hardware that might help... *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=snd_hda_intel latency=32 resources: irq:16 memory:fe024000-fe027fff

    Read the article

  • Do support sites like stackoverflow upset the paid-support open source model?

    - by ajax81
    In order to stay relevant in the marketplace, I'm researching new business models for my software company. The open source model with paid support seems like a good fit for our product, but I have concerns about whether or not a paid support model is viable in an era where top-notch help is readily available for free on sites like those in the StackExchange network. Case in point -- I moved my employees to Ubuntu last year because I didn't want to pay for Win 7 licenses and new hardware (plus, the mono platform was highly attractive). My staff had no Linux experience, but were able to achieve relative competency in about 120 days with the help of AskUbuntu, StackOverflow, and a few "For Dummies" books. We did employ an Ubuntu consultant for 7 days to provide training and support, but beyond that spent $0.00 on any kind of paid expertise. In regards to my due diligence, I ran a 3 month beta of the freemium-paid-support model with one of our smaller customers, and achieved mediocre results. I'd like to think its because our software is so stable and easy to use that the customer didn't need much paid support, but I suspect that they circumvented the terms of our SLA in the same manner that we did with the move to Ubuntu. Does anyone out there has any thoughts, advice, or experience relevant to the move I'm considering? What worked, what didn't, etc? Thanks in advance!

    Read the article

  • Do support sites like Stack Overflow upset the paid-support open source model?

    - by ajax81
    In order to stay relevant in the marketplace, I'm researching new business models for my software company. The open source model with paid support seems like a good fit for our product, but I have concerns about whether or not a paid support model is viable in an era where top-notch help is readily available for free on sites like those in the Stack Exchange network. Case in point -- I moved my employees to Ubuntu last year because I didn't want to pay for Win 7 licenses and new hardware (plus, the mono platform was highly attractive). My staff had no Linux experience, but were able to achieve relative competency in about 120 days with the help of AskUbuntu, Stack Overflow, and a few "For Dummies" books. We did employ an Ubuntu consultant for 7 days to provide training and support, but beyond that spent $0.00 on any kind of paid expertise. In regards to my due diligence, I ran a 3 month beta of the freemium-paid-support model with one of our smaller customers, and achieved mediocre results. I'd like to think its because our software is so stable and easy to use that the customer didn't need much paid support, but I suspect that they circumvented the terms of our SLA in the same manner that we did with the move to Ubuntu. Does anyone out there has any thoughts, advice, or experience relevant to the move I'm considering? What worked, what didn't, etc?

    Read the article

  • Hosting and domain registrations for multiple clients under a single hosting account of mine?

    - by letseatfood
    I am finally getting regular work designing, developing, and deploying websites for small businesses and individuals. So far the websites utilize single-user content management systems, so the websites create, as far as I know, minimal load on the shared servers. I have always required that each of my clients purchase annual shared hosting at Dreamhost. For domain registration, I ask that they register with Dreamhost, but some already have a registered domain elsewhere and this is fine with me. I do this so the billing issues are the client's responsibility, not mine. My question is: Since I can register unlimited domains and connect them to my one shared hosting account at Dreamhost, should I not be requiring clients to individually pay for shared hosting and a domain? Should I actually be paying for one hosting account and then hosting all of my client's websites on that account? As I said before, I currently have each client buy their own hosting, because I feel that, for example, if there is high traffic to their site, there would be less a chance of the site going down than if their site was hosted with many others on one account. I am famous for being long-winded, please let me know if I can clarify at all. Thanks!

    Read the article

  • How do I separate model positions from view positions in MVC?

    - by tieTYT
    Using MVC in games (as opposed to web apps) always confuses me when it comes to the view. How am I supposed to keep the model agnostic of how the view is presenting things? I always end up giving the Model a position that holds x and y but invariably, these values end up being in units of pixels and that feels wrong. I can see the advantage* of avoiding that but how am I supposed to? This idea was suggested: Don't think of it in units of pixels, think of them in arbitrary distance units that just happen map to pixels at a 1:1 ratio. Oh, the resolution is half of what it was? We are now taking the x/y coordinates at 50% value for screen display, and your spells casting range is still 300 units long, which now is 150 pixels. But those numbers conveniently work out. What do I do if the numbers divide in such a way that I get decimal places? Floating points are unsafe. I think allowing decimal places would eventually cause really weird bugs in my game. *It'd let me write the model once and write different views depending on the device.

    Read the article

  • Should my web app have its own domain name?

    - by Daniero
    I'm going to get a domain name for my personal web page. It will contain my blog, photos and other personal stuff, plus different web apps and tools that I'm working on. I have put quite a lot of work in one of the web apps, and I think it has great potential. It covers a niche in a way that no other page has done before and I can see great possibilities to expand it. Via links to webstores and ads I think it could even make some money, and if I play it right this could be the place to go when you're into the specific niche that it covers (sorry for being so vague). My question is, would it be better for a (potentially great) web app like this to have its own domain name (nameofmyapp.com) instead of being a subpage of my personal page (mypersonaldomain.com/nameofmyapp)? Is the web app more likely to be found by others, via Google etc, with its own domain name? Could a "subpage" give more attention (visitors) to my personal page? pros and cons?

    Read the article

  • Observing MVC, can/should the Model be instantiated in the ViewController? Or where?

    - by user19410
    I'm writing an experimental iPhone app to learn about the MVC paradigm. I instantiate my Model class in the ViewController class. Is this stupid? I'm asking because storing the id of the Model class, and using it works where it's initialized, but referring to it later (in response to an interface action) crashes. Seemingly, the pointer address of my Model class instance changes, but how can that be? The code in question: @interface Soundcheck_Tone_GeneratorViewController : UIViewController { IBOutlet UIPickerView * frequencyWheel; @public Sinewave_Generation * sineGenerator; } @property(nonatomic,retain) Sinewave_Generation * sineGenerator; @end @implementation Soundcheck_Tone_GeneratorViewController @synthesize sineGenerator; - (void)viewDidLoad { [super viewDidLoad]; [self setSineGenerator:[[Sinewave_Generation alloc] initWithFrequency:20.0]]; // using reference -> fine } // pickerView handling is omitted here... - (void)pickerView:(UIPickerView *)thePickerView didSelectRow:(NSInteger)row inComponent:(NSInteger)component { [[self sineGenerator] setFrequency:20.0]; // using reference -> crash } @end // the Sinewave_Generation class... only to be thorough. Works fine so far. @interface Sinewave_Generation : NSObject { AudioComponentInstance toneUnit; @public double frequency,theta; } @property double frequency; - (Sinewave_Generation *) initWithFrequency: (int) f; @end @implementation Sinewave_Generation @synthesize frequency; - (Sinewave_Generation *) initWithFrequency: (int) f { self = [super init]; if ( self ) { [self setFrequency: f]; } return self; } @end

    Read the article

  • Public domain usage of imagery from films? [on hold]

    - by AdamJones
    I'm thinking of starting a small film site, which would begin as a simple blog. Imagery from films I discuss on the site would be vital to the look and feel of this site. Instantly though this makes me wonder about copyright/public domain rights for such imagery. I just wondered if anyone had general or specific advise about using imagery from this industry or another similar situation? On the one hand I know the film industry aggressively tries to protect its IP (fair enough), but on the other hand, surely film companies do release some imagery of their films in stills format into the public domain to simply help their distribution and advertising efforts? I have tried looking on stock photo galleries for images of film stills but only found moviestillsdb.com) which seemed very limited in its results. I've researched a bit about fair usage (http://fairuse.stanford.edu/overview/fair-use/) as well, which I know applies to the USA specifically. This seems to suggest that a still of a film is within these bounds. Still, any constructive advise others may have as a result of experience dealing with imagery, from film or another domain would be greatly appreciated, assuming it isn't "get a lawyer".

    Read the article

  • Communicate with the local machine from a web page

    - by Earlz
    Hello. We have a web application. There are physical devices that we need to be able to communicate with, and we have access to all of our clients computers to install whatever software we need. Now, for the question: Is there a way to make this browser-agnostic? As in, not requiring ActiveX controls? One of my ideas was to install a custom made webserver on each client and then have javascript on our webpage that communicates with that webserver. This could be done by the same way that http://earlz.biz.tm javascript can access subdomains assigned to 127.0.0.1 such as http://loopback.earlz.biz.tm The problem with this of course is that the client's custom made webserver would be forced to run on port 80(which will have conflicts at least sometimes), or we would have to use a nonstandard port for our web application, which is quite undesirable. Does anyone else have ideas on how to do this?

    Read the article

  • DataMapper and Codeigniter - how to fully manage a many-to-many relationship

    - by user252160
    I have the following relationship CType has many Field Field has many Ctype and of course the tables used are fields, ctypes, and ctypes_fields. Normally, the ctypes_fields table should contain only ids referencing the other two tables. However, i'd like to put there a "options" field that will contain some content for the concrete instance only. I walked through all DataMapper tuts but I could'n find relevant info on how I could extract these specific values (the ones in the relation table) Should I create a separate model for this relation table or there is a clever way to do this ?

    Read the article

  • ModelBinding to and EntitySet (MVC2 & LinqToSQL)

    - by Myster
    Hi all There seems to be an issue with the default model binder when binding to an EntitySet causes the EntitySet to be empty. The problem is described here and here: Microsoft's response is: ... We have now fixed this and the fix will be included in .NET Framework 4.0. With the new behavior, if the EntitySet passed into Assign is the same object as the one its being assigned to, no action will occur. With a work around being to edit the code generated like so: public override EntitySet<Thing> Things { get { return this._Things; } set { //CORRECTION: _Things= new EntitySet<Thing>(); _Things.Assign(value); //WAS: this._Things.Assign(value); } } As you can imagine this is not ideal as you have to re-add the code every time, does anyone have a better solution?

    Read the article

  • DDD: Aggregate Roots

    - by Mosh
    Hello, I need help with finding my aggregate root and boundary. I have 3 Entities: Plan, PlannedRole and PlannedTraining. Each Plan can include many PlannedRoles and PlannedTrainings. Solution 1: At first I thought Plan is the aggregate root because PlannedRole and PlannedTraining do not make sense out of the context of a Plan. They are always within a plan. Also, we have a business rule that says each Plan can have a maximum of 3 PlannedRoles and 5 PlannedTrainings. So I thought by nominating the Plan as the aggregate root, I can enforce this invariant. However, we have a Search page where the user searches for Plans. The results shows a few properties of the Plan itself (and none of its PlannedRoles or PlannedTrainings). I thought if I have to load the entire aggregate, it would have a lot of overhead. There are nearly 3000 plans and each may have a few children. Loading all these objects together and then ignoring PlannedRoles and PlannedTrainings in the search page doesn't make sense to me. Solution 2: I just realized the user wants 2 more search pages where they can search for Planned Roles or Planned Trainings. That made me realize they are trying to access these objects independently and "out of" the context of Plan. So I thought I was wrong about my initial design and that is how I came up with this solution. So, I thought to have 3 aggregates here, 1 for each Entity. This approach enables me to search for each Entity independently and also resolves the performance issue in solution 1. However, using this approach I cannot enforce the invariant I mentioned earlier. There is also another invariant that states a Plan can be changed only if it is of a certain status. So, I shouldn't be able to add any PlannedRoles or PlannedTrainings to a Plan that is not in that status. Again, I can't enforce this invariant with the second approach. Any advice would be greatly appreciated. Cheers, Mosh

    Read the article

  • How Do I Setup Multiple Stores Using Magento Like Their Demo?

    - by FergatROn
    I'm playing with Magento and I figured out how to create multiple websites and stores and store views, but when I go back to the home page it certainly doesn't look as cool as the Magento Demo (http://www.magento-mall.com/). Are the tabs something they did in the HTML and the store domains are really masking to the ugly store URL? Example: www.kayferg-store1.com = masks to beta.kayferg.com/magento/index.php/?___store=[STORE1] www.kayferg-store2.com = masks to beta.kayferg.com/magento/index.php/?___store=[STORE2]

    Read the article

  • Saving State Dynamic UserControls...Help!

    - by Cognitronic
    I have page with a LinkButton on it that when clicked, I'd like to add a Usercontrol to the page. I need to be able to add/remove as many controls as the user would like. The Usercontrol consists of three dropdownlists. The first dropdownlist has it's auotpostback property set to true and hooks up the OnSelectedIndexChanged event that when fired will load the remaining two dropdownlists with the appropriate values. My problem is that no matter where I put the code in the host page, the usercontrol is not being loaded properly. I know I have to recreate the usercontrols on every postback and I've created a method that is being executed in the hosting pages OnPreInit method. I'm still getting the following error: The control collection cannot be modified during DataBind, Init, Load, PreRender or Unload phases. Here is my code: Thank you!!!! bool createAgain = false; IList<FilterOptionsCollectionView> OptionControls { get { if (SessionManager.Current["controls"] != null) return (IList<FilterOptionsCollectionView>)SessionManager.Current["controls"]; else SessionManager.Current["controls"] = new List<FilterOptionsCollectionView>(); return (IList<FilterOptionsCollectionView>)SessionManager.Current["controls"]; } set { SessionManager.Current["controls"] = value; } } protected void Page_Load(object sender, EventArgs e) { Master.Page.Title = Title; LoadViewControls(Master.MainContent, Master.SideBar, Master.ToolBarContainer); } protected override void OnPreInit(EventArgs e) { base.OnPreInit(e); System.Web.UI.MasterPage m = Master; Control control = GetPostBackControl(this); if ((control != null && control.ClientID == (lbAddAndCondtion.ClientID) || createAgain)) { createAgain = true; CreateUserControl(control.ID); } } protected void AddAndConditionClicked(object o, EventArgs e) { var control = LoadControl("~/Views/FilterOptionsCollectionView.ascx"); OptionControls.Add((FilterOptionsCollectionView)control); control.ID = "options" + OptionControls.Count.ToString(); phConditions.Controls.Add(control); } public event EventHandler<Insight.Presenters.PageViewArg> OnLoadData; private Control FindControlRecursive(Control root, string id) { if (root.ID == id) { return root; } foreach (Control c in root.Controls) { Control t = FindControlRecursive(c, id); if (t != null) { return t; } } return null; } protected Control GetPostBackControl(System.Web.UI.Page page) { Control control = null; string ctrlname = Page.Request.Params["__EVENTTARGET"]; if (ctrlname != null && ctrlname != String.Empty) { control = FindControlRecursive(page, ctrlname.Split('$')[2]); } else { string ctrlStr = String.Empty; Control c = null; foreach (string ctl in Page.Request.Form) { if (ctl.EndsWith(".x") || ctl.EndsWith(".y")) { ctrlStr = ctl.Substring(0, ctl.Length - 2); c = page.FindControl(ctrlStr); } else { c = page.FindControl(ctl); } if (c is System.Web.UI.WebControls.CheckBox || c is System.Web.UI.WebControls.CheckBoxList) { control = c; break; } } } return control; } protected void CreateUserControl(string controlID) { try { if (createAgain && phConditions != null) { if (OptionControls.Count > 0) { phConditions.Controls.Clear(); foreach (var c in OptionControls) { phConditions.Controls.Add(c); } } } } catch (Exception ex) { throw ex; } } Here is the usercontrol's code: <%@ Control Language="C#" AutoEventWireup="true" CodeBehind="FilterOptionsCollectionView.ascx.cs" Inherits="Insight.Website.Views.FilterOptionsCollectionView" %> namespace Insight.Website.Views { [ViewStateModeById] public partial class FilterOptionsCollectionView : System.Web.UI.UserControl { protected void Page_Load(object sender, EventArgs e) { } protected override void OnInit(EventArgs e) { LoadColumns(); ddlColumns.SelectedIndexChanged += new RadComboBoxSelectedIndexChangedEventHandler(ColumnsSelectedIndexChanged); base.OnInit(e); } protected void ColumnsSelectedIndexChanged(object o, EventArgs e) { LoadCriteria(); } public void LoadColumns() { ddlColumns.DataSource = User.GetItemSearchProperties(); ddlColumns.DataTextField = "SearchColumn"; ddlColumns.DataValueField = "CriteriaSearchControlType"; ddlColumns.DataBind(); LoadCriteria(); } private void LoadCriteria() { var controlType = User.GetItemSearchProperties()[ddlColumns.SelectedIndex].CriteriaSearchControlType; var ops = User.GetItemSearchProperties()[ddlColumns.SelectedIndex].ValidOperators; ddlOperators.DataSource = ops; ddlOperators.DataTextField = "key"; ddlOperators.DataValueField = "value"; ddlOperators.DataBind(); switch (controlType) { case ResourceStrings.ViewFilter_ControlTypes_DDL: criteriaDDL.Visible = true; criteriaText.Visible = false; var crit = User.GetItemSearchProperties()[ddlColumns.SelectedIndex].SearchCriteria; ddlCriteria.DataSource = crit; ddlCriteria.DataBind(); break; case ResourceStrings.ViewFilter_ControlTypes_Text: criteriaDDL.Visible = false; criteriaText.Visible = true; break; } } public event EventHandler OnColumnChanged; public ISearchCriterion FilterOptionsValues { get; set; } } }

    Read the article

  • Howto UML: sub methods / calls / operations / procedures

    - by hsmit
    How would you guys model this in UML (in a sequence diagram)? .. car1.drive(); .. ... in Car class: .. drive(){ this.startEngine(); } startEngine(){ this.getKey(); this.insertKey(); } .. a small begin: objx car1 ---- ---- | | | drive() | |-------->| startEngine() | |------------. | | | | |<-----------. | | But where comes the getKey() method? Must this be communicated via another sequence diagram? Or is there a way to include sub procedures?

    Read the article

  • Technical/Programming/Non-SEO Pros and Cons of WWW or no-WWW?

    - by Ingenutrix
    What are technical/programming/non-SEO pros and cons of www or no-www, for domains as well as sub-domains? From Jeff Atwood's twitter at http://twitter.com/codinghorror/status/1637428313 : "sort of regretting the no-www choice because it causes full cookie submission to ALL subdomains. :(" What does this mean? Is there a blog post or article detailing this? What other specific issues and their reasons should be considered for www. vs no-www. Update: On searching for more info on this topic, I found following helpful ( in addition to Laurence Gonsalves answer ) : Dropping the WWW Prefix Impact on search results: Jivlain's and Isaac Lin's comments Use Cookie-free Domains for Components on StackOverflow : Should I default my website to www.foo or not? on StackOverflow : When should one use a ‘www’ subdomain?

    Read the article

  • How to implement an offline reader writer lock

    - by Peter Morris
    Some context for the question All objects in this question are persistent. All requests will be from a Silverlight client talking to an app server via a binary protocol (Hessian) and not WCF. Each user will have a session key (not an ASP.NET session) which will be a string, integer, or GUID (undecided so far). Some objects might take a long time to edit (30 or more minutes) so we have decided to use pessimistic offline locking. Pessimistic because having to reconcile conflicts would be far too annoying for users, offline because the client is not permanently connected to the server. Rather than storing session/object locking information in the object itself I have decided that any aggregate root that may have its instances locked should implement an interface ILockable public interface ILockable { Guid LockID { get; } } This LockID will be the identity of a "Lock" object which holds the information of which session is locking it. Now, if this were simple pessimistic locking I'd be able to achieve this very simply (using an incrementing version number on Lock to identify update conflicts), but what I actually need is ReaderWriter pessimistic offline locking. The reason is that some parts of the application will perform actions that read these complex structures. These include things like Reading a single structure to clone it. Reading multiple structures in order to create a binary file to "publish" the data to an external source. Read locks will be held for a very short period of time, typically less than a second, although in some circumstances they could be held for about 5 seconds at a guess. Write locks will mostly be held for a long time as they are mostly held by humans. There is a high probability of two users trying to edit the same aggregate at the same time, and a high probability of many users needing to temporarily read-lock at the same time too. I'm looking for suggestions as to how I might implement this. One additional point to make is that if I want to place a write lock and there are some read locks, I would like to "queue" the write lock so that no new read locks are placed. If the read locks are removed withing X seconds then the write lock is obtained, if not then the write lock backs off; no new read-locks would be placed while a write lock is queued. So far I have this idea The Lock object will have a version number (int) so I can detect multi-update conflicts, reload, try again. It will have a string[] for read locks A string to hold the session ID that has a write lock A string to hold the queued write lock Possibly a recursion counter to allow the same session to lock multiple times (for both read and write locks), but not sure about this yet. Rules: Can't place a read lock if there is a write lock or queued write lock. Can't place a write lock if there is a write lock or queued write lock. If there are no locks at all then a write lock may be placed. If there are read locks then a write lock will be queued instead of a full write lock placed. (If after X time the read locks are not gone the lock backs off, otherwise it is upgraded). Can't queue a write lock for a session that has a read lock. Can anyone see any problems? Suggest alternatives? Anything? I'd appreciate feedback before deciding on what approach to take.

    Read the article

  • Rails polymorphic associations, two assoc types in one class

    - by snitko
    Consider a class: class Link < ActiveRecord::Base has_many :link_votes, :as => :vote_subject, :class_name => 'Vote' has_many :spam_votes, :as => :vote_subject, :class_name => 'Vote' end The problem is, when I'm adding a new vote with @link.link_votes << Vote.new the vote_subject_type is 'Link', while I wish it could be 'link_votes' or something like that. Is this an AR limitation or is there a way to workaround this thing? I've actually found one related answer, but I'm not quite sure about what it says: http://stackoverflow.com/questions/1168047/polymorphic-association-with-multiple-associations-on-the-same-model/1764117#1764117

    Read the article

  • URL redirect/remapping to a Django app, using DNS or Apache

    - by Art
    Typically I've been lucky enough to have a fairly simple Django and Apache configuration. But now I'm writing several apps that will sit on the same server and I need them to each have individual domains. The apps live at www.myserver.com/app/app1 (app2...) and I would like to access it using www.someawesomedomain.com. I don't want a redirect since I do not want to expose the underlying path. What is the best way to do this, in the context of 5 - 10 sites? I'm using Apache2.

    Read the article

  • Whats up with cross site Scripting (getJSON) and flickr example

    - by Bernhard
    In past i had read the documentation about getJSON and there is an example with a flickr photo api. (the example with the [pussy]cats :-)). No I ask myself why is it possible, to access flickr directly with this example. Ive tried this by store this code on my local machine - it works but if I use a local copy of jquery i just get an error in firebug like this $ is not defined myurl/test.html Line 11 Does anybody of you have a solution for this paradox thing? This is the documentation url HTTP:api.jquery.com/jQuery.getJSON/ The example isn´t also not working if I store the HTTP:code.jquery.com/jquery-latest.js in my local jquery file. I also dont understand why the request isnt´s visible in Firebug Console Thank you in advance Bernhard

    Read the article

  • Rails - Multiple top level domains and a single session/cookie

    - by Thadius B
    Hello all, I've been struggling with this for quite awhile and haven't been able to find a solution. I need a user to be able to view multiple top level domains with a single login. My understanding is that this needs to be set in environment.rb and called with before_dispatch. This is what I've come up with: require 'activesupport' require 'dispatcher' module ActionController class Dispatcher def set_session_domain ActionController::Base.session_options.update :session_domain => "#{@request.host}" end before_dispatch :set_session_domain end end However, this does not seem to be working when I try and pull the values from session[:session_domain]. Any help is greatly appreciated.

    Read the article

  • UnitOfWork & StrcutureMap & Desktop Application

    - by Afshin Gh
    When developing Web App and using StrcutureMap i normally use HybridHttpOrThreadLocalScoped for my UnitOfWork Part. (unit of work starts up per web request and ...) What about a desktop app(windows service, console, ...)? There is no session and request in a desktop app. How should i manage UoW in this situation? any good reference or article? I don't want to make it singleton. What should I do?

    Read the article

  • Yii: Saving date and time in DB

    - by FaisalKhan
    I am having trouble saving the date in DB through Model. In my controller, if I dump the date in log that I receive from $_POST , I get the date in this format "10/Nov/2012 07:30". If I use: $AccountAppointment->start_date=Yii::app()->dateFormatter->format($_POST['AccountAppointment']['start_date'], 'dd/M/yyyy HH:mm'); I get the error: Invalid datetime format: 1292 Incorrect datetime value: '10/NoGMT+5/2012 07:30' for column 'start_date' Changing the format in dateFormatter to 'dd/M/yyyy HH:mm' or 'dd/MM/yyyy HH:mm' or 'dd/MMM/yyyy HH:mm' throws the same error. Db is MySQL 5.0, Yii version 1.1.12. Any help would be greatly appreciated, I am almost stuck....thanks....

    Read the article

  • Flex spark web browser problem

    - by sheela
    am using spark web in flex its working fine in IE6 where as in IE7 , Firefox, opera and other browser its not working. on login to spark web its giving error: Problem authenticating with the server or you are not authorised to perform this operation. Please help me out regarding this Thanks n regards Sheela

    Read the article

  • Overriding as_json has no effect?

    - by Ola Tuvesson
    I'm trying to override as_json in one of my models, partly to include data from another model, partly to strip out some unnecessary fields. From what I've read this is the preferred approach in Rails 3. To keep it simple, let's say I've got something like: class Country < ActiveRecord::Base def as_json(options={}) super( :only => [:id,:name] ) end end and in my controller simply def show respond_to do |format| format.json { render :json => @country } end end Yet whatever i try, the output always contains the full data, the fields are not filtered by the ":only" clause. Basically, my override doesn't seem to kick in, though if I change it to, say... class Country < ActiveRecord::Base def as_json(options={}) {foo: "bar"} end end ...I do indeed get the expected JSON output. Have I simply got the syntax wrong?

    Read the article

< Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >