Search Results

Search found 4945 results on 198 pages for 'editor'.

Page 172/198 | < Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >

  • Parsing a blackberry .ipd file

    - by galaxywatcher
    I recently lost my Blackberry. When I discovered it was gone very shortly afterwards and called it, the sim card had already been removed. I ain't seeing that Blackberry again. Ok. I am out $300, but at least my data is backed up. I had an older working Blackberry fortunately and I got a new sim card and proceeded to restore my data using Blackberry Desktop Manager. 7000+ emails, hundreds of autotext entries, sms messages, calendar events, all backing up. Looking good. Lo and behold! My Address Book contacts refuse to back up? I try advanced, and it is greyed out as an option to restore. Far more frustrating than losing my bberry in the first place is wrangling with software that defies human logic. Ok, now I guess I will have to enter all 327 names by hand. That is, if I can read the .ipd file. I have tried the free version of ABC Amber Blackberry editor, but when I open the .ipd file, the contacts just do not show up. I am beginning to feel like the gods are conspiring against me. Then I found this: http://jabide.com/2009/03/parse-blackberry-ipd-files/ He posted a perl script that claims to extract the files. I copied and pasted the code and it did list all the different databases in my .ipd file, I was elated that a cool solution like this was published. I followed the instructions and garbled data with some discernible ascii was sent to standard output unlike a .csv file like he said it would. This is enough to make a grown man cry. Does anyone out there have a solution to extract my address book contacts from an .ipd file?

    Read the article

  • How do you find a functions virtual call address in assembly?

    - by Daniel
    I've googled around but i'm not sure i am asking the right question or not and i couldn't find much regardless, perhaps a link would be helpful. I made a c++ program that shows a message box, then I opened it up with Ollydbg and went to the part where it calls MessageBoxW. The call address of MessageBoxW changes each time i run the app as windows is updating my Imports table to have the correct address of MessageBoxW. So my question is how do i find the virtual addres of MessageBoxW to my imports table and also how can i use this in ollydbg? Basically I'm trying to make a code cave in assembly to call MessageBoxW again. I got fairly close once by searching the executable with a hex editor and found the position of the call, and I think I found the virtual address. But when i call that virtual address in olly and saved it to the executable, the next time i opened it the call was replaced with a bunch of DB xyz (which looked like the virtual address but why did the call get removed? Sorry if my terminology is off as i'm new to this so i'm not quite sure what to call things.

    Read the article

  • Producing 64-bit builds on Windows with free software

    - by pauldoo
    Hi, I have a C++ project that I've been developing in Microsoft Visual C++ 2008 Express Edition. It has come to the point that I'd like to port to 64-bit and continue development. What is the best way to do this using free software? My thoughts so far: The Express Edition of MSVC doesn't come with 64-bit compilers, so I can install the Windows SDK to get these. I could then port my project files to nmake, and use the IDE just as a tool to debug and invoke my nmake scripts.. The downside to this is that nmake looks very poor. The example towards the end of this tutorial suggests that nmake cannot figure out source file dependences itself, and I don't know of anything equivelant to gcc -M that I could use. Another option might be to use vcbuild from the Windows SDK to produce 64-bit builds from my existing vcproj files. Preliminary investigations show that this doesn't really work, as my project files don't have the 64-bit configurations present. (Perhaps I could fudge this by adding the 64-bit configurations to the vcproj files in a text editor.) A final option might be to give up on MSVC, and port my project to the MinGW/MSYS toolchain.

    Read the article

  • NetBeans Tips and Tricks

    - by cdmckay
    I just saw an Eclipse tips & tricks post and was wondering if anyone had any tips & tricks for my IDE of choice: NetBeans. Here's a few I know and find to be useful: Removing a package: After you remove a package in NetBeans, it sticks around as a grayed-out package in your Project view. To get rid of that, switch to Files view and delete the directory. Alt-Insert (in Windows) opens up a Generate submenu at your cursor. A nice shortcut for quickly generating getters/setters (among other things). Selecting a chunk of code, right-clicking and then clicking "Refactor Introduce Method" will have NetBeans introduce a method, complete with arguments and return value. Of course you have to make sure the chunk of code only has one return value. Sometimes when you run a build and it crashes, the Java window sticks around at the bottom. I used to just click X until Windows let me End Task, but there's a nicer way to get rid of them. Click "Run Stop Build/Run" and NetBeans will close the window for you. It'll even let you close multiple applications at once. These may seem obvious to grizzled NetBeans developers, but I thought they might be useful for NetBeans newbs like me. Anyone else have any tips/tricks to share? Here are some from the comments: NetBeans allows for code templates. You can even add yours on the Code Templates tab under the Editor settings on the Options window. Some examples: Type sout and hit the tab key as a shorcut for System.out.println("") Type psvm and hit the tab key as a shorcut for public static void main(String args[]) {} Ctrl Shift C: Comments out the selected block of code. Alt Shift F: Formats the selected block of code. Ctrl E: Deletes current line. Ctrl Shift I: Fixes your imports, handy if you've just written a piece of code that needs a lot of packages imported.

    Read the article

  • as3crypto PEM.readRSAPublicKey returns null

    - by www.jefferyfernandez.id.au
    I am trying to implement a bit of encryption in my Air application while communication with a PHP backend server. For this purpose I am using as3crypto library and I can't read the public key to make the encryption possible. Here is my action script code: var rsa:RSAKey = PEM.readRSAPublicKey(this.readApplicationFileContents('server.crt')); if ( rsa ) { var encodeSource:ByteArray = Hex.toArray(Hex.fromString("Hello World")); var encodeDestination:ByteArray = new ByteArray; var encodeDestination2:ByteArray = new ByteArray; rsa.encrypt(encodeSource, encodeDestination, encodeSource.length) rsa.decrypt(encodeDestination, encodeDestination2, encodeDestination.length); trace(encodeDestination2.toString()); } private function readApplicationFileContents(filePath:String):String { var fileObject:File = File.applicationDirectory.resolvePath(filePath); var fileStream:FileStream = new FileStream(); fileStream.open(fileObject, FileMode.READ); var fileContents:String = fileStream.readUTFBytes(fileStream.bytesAvailable); return(fileContents); } readApplicationFileContents function returns the proper certificate contents as a string. But rsa variable always returns null. It would have been easier if I was able to compile the as3crypto library so I can debug through the source, but I can't get the library to compile and can't find any instructions to do the same. Anyone have a clue what's wrong? PS. Sorry first time poster and I can't seem to get the syntax highlighting right. Must be Chrome is not working well with the editor.

    Read the article

  • Allowing user to edit only the page content and some custom fields in wordpress

    - by GaVrA
    This is the site: http://www.backpackers.rs Using "User Role Editor" i have user group that can only read and edit published pages so i can have as many users as i want in that user group and they all will have only one published page on their own so they can edit only that page. Now, this is how a user in that user group currently is seeing "edit page" page: http://i39.tinypic.com/rwuesh.png What i need is to disable all those things that have a red border around it + something with custom fields. So i need to disable these things for user in that user group: ability to change status of the page entire "Attributes" block is something that he/she must not see or be able to change ability to change something in "Discussion" block he/she shouldnt see "Page revisions" block i need a way to give those users ability to use only some custom fields. Currently we have 6 custom fields, and i want to give these users ability to only use 4 of those custom fields. i need to disable these users from creating new custom fields. I dont need complete answers for these things, something to get me started is really what i need. I have been reading codex a lot, but still didnt find something to help me with this, so basically any answer is more then appreciated!

    Read the article

  • How to create a high quality icon for my Windows application?

    - by Patrick Klug
    If you are running Windows with a higher DPI setting you will notice that most application icons on the desktop look terrible. Even high profile application icons such as Google Chrome look terrible while for example Firefox, Skype and MS Office icons look sharp: (example) I suspect that most icons look blurry because a lower resolution icon is scaled up rather than using a higher resolution icon. I want to give my application a high quality icon and can't seem to convince Windows to use the higher resolution icon. I have created a multi-resolution icon with the free icon editor IcoFX. The icon is provided in 16x16, 24x24, 32x32,48x48, 128x128 and 256x256 (!) (all in 32 bit including alpha channel) yet Windows seems to use the 128x128 version of the icon on the desktop and scale it up which looks terrible. (I am using Windows 7 - 64 bit - the icon is placed by means of setting up a shortcut in the msi (created via Visual Studio 2008 Setup Project) and pointing it to the .ico file that contains the multi-resolution icon) I have tried removing the 128x128 icon but to no avail. Interestingly in Windows Explorer the icon looks great even when using the Extra Large Icon setting. How can I create a high quality desktop icon that looks great on higher DPI settings on Windows?

    Read the article

  • Troubles with PyDev and external libraries in OS X

    - by Davide Gualano
    I've successfully installed the latest version of PyDev in my Eclipse (3.5.1) under OS X 10.6.3, with python 2.6.1 I have troubles in making the libraries I have installed work. For example, I'm trying to use the cx_Oracle library, which is perfectly working if called from the python interpeter of from simple scripts made with some text editor. But I cant make it work inside Eclipse: I have this small piece of code: import cx_Oracle conn = cx_Oracle.connect(CONN_STRING) sql = "select field from mytable" cursor = conn.cursor() cursor.execute(sql) for row in cursor: field = row[0] print field If I execute it from Eclipse, I get the following error: import cx_Oracle File "build/bdist.macosx-10.6-universal/egg/cx_Oracle.py", line 7, in <module> File "build/bdist.macosx-10.6-universal/egg/cx_Oracle.py", line 6, in __bootstrap__ ImportError: dlopen(/Users/dave/.python-eggs/cx_Oracle-5.0.3-py2.6-macosx-10.6-universal.egg-tmp/cx_Oracle.so, 2): Library not loaded: /b/227/rdbms/lib/libclntsh.dylib.10.1 Referenced from: /Users/dave/.python-eggs/cx_Oracle-5.0.3-py2.6-macosx-10.6-universal.egg-tmp/cx_Oracle.so Reason: no suitable image found. Did find: /Users/dave/lib/libclntsh.dylib.10.1: mach-o, but wrong architecture Same snippet works perfectly from the python shell I have configured the interpeter in Eclipse in preferences - PyDev -- Interpreter - Python, using the Auto Config option and selecting all the libs found. What am I doing wrong here? Edit: launching file /Users/dave/.python-eggs/cx_Oracle-5.0.3-py2.6-macosx-10.6-universal.egg-tmp/cx_Oracle.so from the command line tells this: /Users/dave/.python-eggs/cx_Oracle-5.0.3-py2.6-macosx-10.6-universal.egg-tmp/cx_Oracle.so: Mach-O universal binary with 3 architectures /Users/dave/.python-eggs/cx_Oracle-5.0.3-py2.6-macosx-10.6-universal.egg-tmp/cx_Oracle.so (for architecture i386): Mach-O bundle i386 /Users/dave/.python-eggs/cx_Oracle-5.0.3-py2.6-macosx-10.6-universal.egg-tmp/cx_Oracle.so (for architecture ppc7400): Mach-O bundle ppc /Users/dave/.python-eggs/cx_Oracle-5.0.3-py2.6-macosx-10.6-universal.egg-tmp/cx_Oracle.so (for architecture x86_64): Mach-O 64-bit bundle x86_64

    Read the article

  • Firefox radial gradient issue

    - by Tural Teyyuboglu
    Trying to set radial gradient to the bg. The problem is, all other browsers shows gradient, on Firefox doesn't. What's wrong? Generated this code on this website http://www.colorzilla.com/gradient-editor/ (with ie9 support) background: rgb(255,255,255); background: url(data:image/svg+xml;base64,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); background: -moz-radial-gradient(center, ellipse cover, rgba(255,255,255,1) 0%, rgba(234,234,234,1) 100%); background: -webkit-gradient(radial, center center, 0px, center center, 100%, color-stop(0%,rgba(255,255,255,1)), color-stop(100%,rgba(234,234,234,1))); background: -webkit-radial-gradient(center, ellipse cover, rgba(255,255,255,1) 0%,rgba(234,234,234,1) 100%); background: -o-radial-gradient(center, ellipse cover, rgba(255,255,255,1) 0%,rgba(234,234,234,1) 100%); background: -ms-radial-gradient(center, ellipse cover, rgba(255,255,255,1) 0%,rgba(234,234,234,1) 100%); background: radial-gradient(center, ellipse cover, rgba(255,255,255,1) 0%,rgba(234,234,234,1) 100%); filter: progid:DXImageTransform.Microsoft.gradient( startColorstr='#ffffff', endColorstr='#eaeaea',GradientType=1 );

    Read the article

  • How can I add the "--watch" flag to this TextMate snippet?

    - by Jannis
    I love TextMate as my editor for all things web, and so I'd like to use a snippet to use it with style.less files to automatically take advantage of the .less way of compiling .css files on the fly using the native $ lessc {filepath} --watch as suggested in the less documentation (link) My (thanks to someone who wrote the LESS TM Bundle!) current TextMate snippet works well for writing the currently opened .less file to the .css file but I'd like to take advantage of the --watch parameter so that every change to the .less file gets automatically compiled into the .css file. This works well when using the Terminal command line for it, so I am sure it must be possible to use it in an adapted version of the current LESS Command for TextMate since that only invokes the command to compile the file. So how do I add the --watch flag to this command:? #!/usr/bin/env ruby file = STDIN.read[/lessc: ([^*]+\.less)/, 1] || ENV["TM_FILEPATH"] system("lessc \"#{file}\"") I assume it should be something like: #!/usr/bin/env ruby file = STDIN.read[/lessc: ([^*]+\.less)/, 1] || ENV["TM_FILEPATH"] system("lessc \"#{file}\" --watch") But doing so only crashes the TextMate.app. Any ideas would be much appreciated. Thanks for reading. Jannis

    Read the article

  • MS Source Server - source stream is apparently not there when viewing with srctool

    - by Tim Peel
    Hi, I have been playing around with the MS Source Server stuff in the MS Debugging Tools install. At present, I am running my code/pdbs through the Subversion indexing command, which is now running as expected. It creates the stream for a given pdb file and writes it to the pdb file. However when I use that DLL and associated pdb in visual studio 2008, it says the source code cannot be retrieved. If I check the pdb against srctool is says none of the source files contained are indexed, which is very strange as the process prior ran fine. If I check the stream that was generated from the svnindex.cmd run for the pdb, srctool says all source files are indexed. Why would there be a difference? I have opened the pdb file in a text editor and I can see the original references to the source files on my machine (also under the srcsrv header name) and the new "injected" source server links to my subversion repository). Should both references still exist in the pdb? I would have expected one to be removed? Either way, visual studio 2008 will not pick up my source references so I am a bit lost as to what to try next. As far as I can tell, I have done everything I should have. Anyone have similar experiences? Many thanks.

    Read the article

  • Sharepoint BDC Error: The title property of entity tblStaff is set to an invalid value

    - by Christopher Rathermel
    I am just starting to create our Business Data Catalog(s) for our practice management system and I am running into an issue w/ our staff table. Background: I am using Business Data Catalog Definition Editor to create my ADF. I am using the RevertToSelf Authentication Mode. I have tried a few other tables and they seem to work just fine thus far.. only issue is w/ the staff table. If I removed all the columns for the staff entity except the ID and a few columns for the name it actually works. So it has a problem w/ one of my columns in tblStaff. I receive this error even when I set up an ADF w/ just this one entity. So w/ no associations.. When attempting to view the record: http://servername/ssp/admin/Content/tblstaff.aspx?StaffID={0} w/ {0} replaced w/ an actual staff ID I get the following error: The title property of entity tblStaff is set to an invalid value. Things I have tried: I noticed that I do have a column in my staff table called "Title" and removed it from ADF w/ no luck... Same error.. I tried to use bdc meta man to create my ADF and I got the same error... Any ideas? Chris

    Read the article

  • Categories of tags

    - by Peter Rowell
    I'm starting a pro bono project that is the web interface to the world's largest collection of lute music and it's a challenging collection from several points of view. The pieces are largely from 1400 to 1600, but they range from the mid-1200's to present day. Needless to say, there is tremendous variability in how the pieces are categorized and who they are attributed to. It is obvious that any sort of rigid, DB-enforced hierarchy isn't going to work with this collection, so my thoughts turn to tags. But not all tags are the same. I'll have tags that represent a person/role (composer, translator, entabulator, etc.), tags that represent the instrument(s) the piece in written for, and tags that represent how the piece has been classified by any one of half a dozen different classification systems used over the centuries. We will be using a semi-controlled tag vocabulary to prevent runaway tag proliferation (e.g. del.icio.us), but I want to treat the tags as belonging to different groups. People tags should not be offered when the editor is doing instrument tagging, etc. Has anyone done something like this? I have several ways I can think of to do it, but if there is an existing system that is well-done it would save me time implementing/debugging. FWIW: This is a Django system and I'm looking at starting with Django-tagging and then hacking from there, possibly adding a category field or ...

    Read the article

  • Execute multiple command lines with the same process using C#

    - by rima
    Hi according to my last question here I try to write a sql Editor or some thing like this,in this way I try to connect to CMD from C# and execute my command. now my problem is for example I connect to SQLPLUS after that I cant get SQLPLUS command,and the other resource I review don't satisfy me.Please help me how after I connected to Sqlplus ,I can a live my process to run my sql command? right now I use this code: //Create process System.Diagnostics.Process pProcess = new System.Diagnostics.Process(); //strCommand is path and file name of command to run pProcess.StartInfo.FileName = strCommand; //strCommandParameters are parameters to pass to program pProcess.StartInfo.Arguments = strCommandParameters; pProcess.StartInfo.UseShellExecute = false; //Set output of program to be written to process output stream pProcess.StartInfo.RedirectStandardOutput = true; //Optional pProcess.StartInfo.WorkingDirectory = strWorkingDirectory; //Start the process pProcess.Start(); //Get program output string strOutput = pProcess.StandardOutput.ReadToEnd(); //Wait for process to finish pProcess.WaitForExit(); but i customize it.I separate the initialize, i mean i just create process object one time,but I still have problem. to run the second command I use these codes for second time calling: pProcess.StartInfo.FileName = strCommand; //strCommandParameters are parameters to pass to program pProcess.StartInfo.Arguments = strCommandParameters; //Start the process pProcess.Start(); //Get program output string strOutput = pProcess.StandardOutput.ReadToEnd(); //Wait for process to finish pProcess.WaitForExit(); Thanks in advance

    Read the article

  • ViewModel updates after Model server roundtrip

    - by Pavel Savara
    I have stateless services and anemic domain objects on server side. Model between server and client is POCO DTO. The client should become MVVM. The model could be graph of about 100 instances of 20 different classes. The client editor contains diverse tab-pages all of them live-connected to model/viewmodel. My problem is how to propagate changes after server round-trip nice way. It's quite easy to propagate changes from ViewModel to DTO. For way back it would be possible to throw away old DTO and replace it whole with new one, but it will cause lot of redrawing for lists/DataTemplates. I could gather the server side changes and transmit them to client side. But the names of fields changed would be domain/DTO specific, not ViewModel specific. And the mapping seems nontrivial to me. If I should do it imperative way after round-trip, it would break SOC/modularity of viewModels. I'm thinking about some kind of mapping rule engine, something like automappper or emit mapper. But it solves just very plain use-cases. I don't see how it would map/propagate/convert adding items to list or removal. How to identify instances in collections so it could merge values to existing instances. As well it should propagate validation/error info. Maybe I should implement INotifyPropertyChanged on DTO and try to replay server side events on it ? And then bind ViewModel to it ? Would binding solve the problems with collection merges nice way ? Is EventAgregator from PRISM useful for that ? Is there any event record-replay component ? Is there better client side pattern for architecture with server side logic ?

    Read the article

  • Delphi - Populate an imagelist with icons at runtime 'destroys' transparency

    - by ben
    Hi again, I've spended hours for this (simple) one and don't find a solution :/ I'm using D7 and the TImageList. The ImageList is assigned to a toolbar. When I populate the ImageList at designtime, the icons (with partial transparency) are looking fine. But I need to populate it at runtime, and when I do this the icons are looking pretty shitty - complete loose of the partial transparency. I just tried to load the icons from a .res file - with the same result. I've tried third party image lists also without success. I have no clue what I could do :/ Thanks 2 all ;) edit: To be honest I dont know exactly whats going on. Alpha blending is the correkt term... Here are 2 screenies: Icon added at designtime: Icon added at runtime: Your comment that alpha blending is not supported just brought the solution: I've edited the image in an editor and removed the "alpha blended" pixels - and now it looks fine. But its still strange that the icons look other when added at runtime instead of designtime. If you (or somebody else ;) can explain it, I would be happy ;) thanks for you support!

    Read the article

  • VB.Net Application Settings / ClickOnce

    - by B Z
    VS 2008 / VB.Net / WinForms I have an application setting (Settings.settings) for a project and I am using Click Once deployment. I used the VS Editor to create the setting and I can see the setting in the app.config file <applicationSettings> <MyApp.Win.My.MySettings> <setting name="MySetting" serializeAs="String"> <value>False</value> </setting> </MyApp.ArtTracker.Win.My.MySettings> </applicationSettings> I would like to update this setting after the application is compiled. The setting is for testing purposes only. If I change the xxx.config.deploy and I reinstall the app with click once. The new setting value doesn't change (seems to be cached somewhere). Even if I change in my local pc the setting seems to be cached somewhere. If I go in VS it asks me to Re-Sync the settings. But I need to do this after the application is compiled. Thanks for any help

    Read the article

  • RemoteRef.invoke implementation

    - by phill
    Just finished a basic implementation of RMI for a class project, and now I am interested in how it is actually done. Sun is kind enough to provide the source for the majority of the Java classes with the JDK, however an implementation of RemoteRef doesn't seem to be there. I have the source for the interface RemoteRef along with the ServerRef interface and one implementation, ProxyRef, which just calls invoke on another RemoteRef, but none of the classes that implement actual code, ActivatableRef or UnicastRef for example, are included. I mention ActivatableRef and UnicastRef because I believe these have proper implementations of invoke thanks to the wonder that is Eclipse and its class file editor showing that it is more then just a method declaration. Although I can tell that it is more then a declaration, I can't get much more out of it, building a string here, throw exception there, but nothing about the process that is taking place to send the remote method call. Would anyone here happen to know where I can get this code, or if its even available? If it is not available, would anyone happen to know what the message being sent to the server looks like? phill

    Read the article

  • Algorithm to determine which points should be visible on a map based on zoom

    - by lgratian
    Hi! I'm making a Google Maps-like application for a course at my Uni (not something complex, it should load the map of a city for example, not the whole world). The map can have many layers, including markers (restaurants, hospitals, etc.) The problem is that when you have many points and you zoom out the map it doesn't look right. At this zoom level only some points need to be visible (and at the maximum map size, all points). The question is: how can you determine which points should be visible for a specified zoom level? Because I have implemented a PR Quadtree to speed up rendering I thought that I could define some "high-priority" markers (that are always visible, defined in the map editor) and put them in a queue. At each step a marker is removed from the queue and all it's neighbors that are at least D units away (D depends on the zoom levels) are chosen and inserted in the queue, and so on. Is there any better way than the algorithm I thought of? Thanks in advance!

    Read the article

  • Using custom coordinates with QGraphicsScene

    - by Rob
    I am experimenting with a WYSIWYG editor that allows a user to draw shapes on a page and the Qt graphics scene support seems perfect for this. However, instead of working in pixels I want all my QGraphicsItem objects to work in tenths of a millimetre but I don't know how to achieve this. For example: // Create a scene that is the size if an A4 page (2100 = 21cm, 2970 = 29.7cm) QGraphicsScene* scene = new QGraphicsScene(0, 0, 2100, 2970); // Add a rectangle located 1cm across, 1cm down, 5cm wide and 2cm high QGraphicsItem* item = scene->addRect(100, 100, 500, 200); ... QGraphicsView* view = new QGraphicsView(scene); setCentralWidget(view); Now, when I display the scene above I want the shapes to appear at correct size for the screen DPI. Is this simply a case of using QGraphicsView::scale or do I have to do something more complicated? Note that if I was using a custom QWidget instead then I would use QPainter::setWindow and QPainter::setViewport to create a custom mapping mode but I can't see how to do this using the graphics scene support.

    Read the article

  • Retrive data from two tables in asp.net mvc using ADO.Net Entity Framework

    - by user192972
    Please read my question carefully and reply me. I have two tables as table1 and table2. In table1 i have columns as AddressID(Primary Key),Address1,Address2,City In table2 i have columns as ContactID(Primary Key),AddressID(Foriegn Key),Last Name,First Name. By using join operation i can retrive data from both the tables. I created a Model in my MVC Application.I can see both the tables in enitity editor. In the ViewData folder of my solution explorer i created two class as ContactViewData.cs and SLXRepository.cs In the ContactViewData.cs i have following code public IEnumerable<CONTACT> contacts { get; set; } In the SLXRepository.cs i have following code public IEnumerable<CONTACT> GetContacts() { var contact = ( from c in context.CONTACT join a in context.ADDRESS on c.ADDRESSID equals a.ADDRESSID select new { a.ADDRESS1, a.ADDRESS2, a.CITY, c.FIRSTNAME, c.LASTNAME } ); return contact; } I am getting the error in return type Cannot implicitly convert type 'System.Linq.IQueryable' to 'System.Collections.Generic.IEnumerable'. An explicit conversion exists (are you missing a cast?)

    Read the article

  • Office Automation: What does destroy my encoding?

    - by Filburt
    I'm facing a problem with a Word Mail Merge Automation controlled by our CRM system. The setup Base for the Mail Merge is a Word .dot template which fires a macro on Document.New. Inside this macro I create a .Net component registered for COM. Set myCOMObject = CreateObject("MyCOMObject") The component pulls some data from a database and hands string values which are assigned to Word DocumentVariables. Set someClass = myCOMObject.GetSomeClass(123) ActiveDocument.Variables("docaddress") = someClass.GetSenderAddress(456) All string values returned from the component are encoded in UTF-8 (codepage 1200). What happens The problem arises when the CRM system calls Word to perform the Mail Merge: The string values from the component are turned into UTF-8 encoded strings. All the static text inside the template and the data pulled for the Mail Merge stay nicely encoded in UTF-16 - example the umlaut ü inside my DocumentVariables is turned into c3 b0 while it stays fc for the rest of the document (checked file in hex editor). If I'm creating a document from a template with the same macro functionallity but without performing a Mail Merge all strings are fine; i.e. are encoded in UTF-16. What changed According to the CRM software vendor the encoding of the Mail Merge data export was changed to UTF-16 with the new version we're currently testing. I found out that MS states that you'll expirience issues when the document and the Mail Merge data file encoding don't match. What I tried Since I'm assuming to merge with UTF-16 encoded data I added the following lines to my macro: ActiveDocument.TextEncoding = msoEncodingWestern ActiveDocument.SaveEncoding = msoEncodingUnicodeLittleEndian This is what the Mail Merge data document specifies in its document properties.

    Read the article

  • I can't get datepicker to work

    - by vikitor
    Hi, I need a field that displays the datepicker. I followed the example given by the JQuery UI documentation and haven't managed to get it to work. My html where I have my text field is: <div class="editor-field"> <input type = "text" name = "DatePublished" id = "Published" /> <%= Html.ValidationMessage("DatePublished" ,"*") %> </div> This HTML is in a partial view, lets call it pv.ascx, and it is called in the main page as a modal box: <div id = "ModalBox"> <% Html.RenderAction("pv", "Example"); %> </div> The thing is, that I try to call the datepicker creation anytime I enter the main page, and I do it in my javascript file app.js: $().ready(function() { var place = window.location.pathname; var placesplit = place.split("/"); //Depending on the location we are on, we execute different subroutines $('#Published').datepicker(); }); But nothing happens when I focus on the text field. What is wrong? Could it be that being called from a partial view it doesn't work? Thank you everyone, vikitor

    Read the article

  • Parallel scroll textarea and webpage with jquery

    - by Roger Rogers
    This is both a conceptual and how-to question: In wiki formatting, or non WYSIWYG editor scenarios, you typically have a textarea for content entry and then an ancillary preview pane to show results, just like StackOverflow. This works fairly well, except with larger amounts of text, such as full page wikis, etc. I have a concept that I'd like critical feedback/advice on: Envision a two pane layout, with the preview content on the left side, taking up ~ 2/3 of the page, and the textarea on the right side, taking up ~ 1/3 of the page. The textarea would float, to remain in view, even if the user scrolls the browser window. Furthermore, if the user scrolls the textarea content, supposing it has exceeded the textarea's frame size, the page would scroll so that the content presently showing in the textarea syncs/is parallel with the content showing in the browser window. I'm imagining a wiki scenario, where going back and forth between markup and preview is frustrating. I'm curious what others think; is there anything out there like this? Any suggestions on how to attack this functionality (ideally using jquery)? Thanks

    Read the article

  • Drupal workflow action access integrated with taxonomy access control?

    - by groovehunter
    hi, I am building a DMS for our intranet and use a taxonomy hierarchy because we need access control that way. All company locations manage (upload,edit) their own documents but should be able to access all. This is inherited to the child terms and works fine. Additionally we want simple 3-step workflow (draft,published,archived). So i introduced roles for editor, publisher and docadmin and set permissions for the transitions. Also triggers to effectivly (un)publish documents. But (of course) a user of role publisher can do the transition for ALL documents. But we want publisher for each company location (top taxonomy level, see above). Could this be achieved? Do i have to set it up by myself (i guess "rules" is appropriate to do this) or is there another module helping. role inheritance was a guess, but that is only about roles (naturally). "module grants" i use and checked first option. That way my thoughts are going. I hope you get my idea resp. problem. drupal 6.16 current edit: I reread the docs and found ie. http://drupal.org/node/408018 Revisioning for categorized content. Will reread that.

    Read the article

< Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >