Search Results

Search found 4332 results on 174 pages for 'resolve'.

Page 172/174 | < Previous Page | 168 169 170 171 172 173 174  | Next Page >

  • Windows Server 2008 R2 network adapter stops working, requires hard reboot

    - by Geoff Dalgas
    TL;DR version: Turns out this was a Windows Server 2008 R2 kernel networking bug. After siccing Microsoft support on it, we (eventually) got an unpublished kernel hotfix from Microsoft to address it. If you, too, are experiencing mysterious low-level network driver failures requiring a reboot/bluescreen cycle, you might want that hotfix (or maybe Service Pack 1 whenever it is released, too.) We have been using HAProxy along with heartbeat from the Linux-HA project. We are using two linux instances to provide a failover. Each server has with their own public IP and a single IP which is shared between the two using a virtual interface (eth1:1) at IP: 69.59.196.211 The virtual interface (eth1:1) IP 69.59.196.211 is configured as the gateway for the windows servers behind them and we use ip_forwarding to route traffic. We are experiencing an occasional network outage on one of our windows servers behind our linux gateways. HAProxy will detect the server is offline which we can verify by remoting to the failed server and attempting to ping the gateway: Pinging 69.59.196.211 with 32 bytes of data: Reply from 69.59.196.220: Destination host unreachable. Running arp -a on this failed server shows that there is no entry for the gateway address (69.59.196.211): Interface: 69.59.196.220 --- 0xa Internet Address Physical Address Type 69.59.196.161 00-26-88-63-c7-80 dynamic 69.59.196.210 00-15-5d-0a-3e-0e dynamic 69.59.196.212 00-21-5e-4d-45-c9 dynamic 69.59.196.213 00-15-5d-00-b2-0d dynamic 69.59.196.215 00-21-5e-4d-61-1a dynamic 69.59.196.217 00-21-5e-4d-2c-e8 dynamic 69.59.196.219 00-21-5e-4d-38-e5 dynamic 69.59.196.221 00-15-5d-00-b2-0d dynamic 69.59.196.222 00-15-5d-0a-3e-09 dynamic 69.59.196.223 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 225.0.0.1 01-00-5e-00-00-01 static On our linux gateway instances arp -a shows: peak-colo-196-220.peak.org (69.59.196.220) at <incomplete> on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-222.peak.org (69.59.196.222) at 00:15:5d:0a:3e:09 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 Why would arp occasionally set the entry for this failed server as <incomplete>? Should we be defining our arp entries statically? I've always left arp alone since it works 99% of the time, but in this one instance it appears to be failing. Are there any additional troubleshooting steps we can take help resolve this issue? THINGS WE HAVE TRIED I added a static arp entry for testing on one of the linux gateways which still didn't help. root@haproxy2:~# arp -a peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-221.peak.org (69.59.196.221) at 00:15:5d:00:b2:0d [ether] on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 peak-colo-196-220.peak.org (69.59.196.220) at 00:21:5e:4d:30:8d [ether] PERM on eth1 root@haproxy2:~# arp -i eth1 -s 69.59.196.220 00:21:5e:4d:30:8d root@haproxy2:~# ping 69.59.196.220 PING 69.59.196.220 (69.59.196.220) 56(84) bytes of data. --- 69.59.196.220 ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 6006ms Rebooting the windows web server solves this issue temporarily with no other changes to the network but our experience shows this issue will come back. Swapping network cards and switches I noticed the link light on the port of the switch for the failed windows server was running at 100Mb instead of 1Gb on the failed interface. I moved the cable to several other open ports and the link indicated 100Mb for each port that I tried. I also swapped the cable with the same result. I tried changing the properties of the network card in windows and the server locked up and required a hard reset after clicking apply. This windows server has two physical network interfaces so I have swapped the cables and network settings on the two interfaces to see if the problem follows the interface. If the public interface goes down again we will know that it is not an issue with the network card. (We also tried another switch we have on hand, no change) Changing network hardware driver versions We've had the same problem with the latest Broadcom driver, as well as the built-in driver that ships in Windows Server 2008 R2. Replacing network cables As a last ditch effort we remembered another change that occurred was the replacement of all of the patch cords between our servers / switch. We had purchased two sets, one green of lengths 1ft - 3ft for the private interfaces and another set of red cables for the public interfaces. We swapped out all of the public interface patch cables with a different brand and ran our servers without issue for a full week ... aaaaaand then the problem recurred. Disable checksum offload, remove TProxy We also tried disabling TCP/IP checksum offload in the driver, no change. We're now pulling out TProxy and moving to a more traditional x-forwarded-for network arrangement without any fancy IP address rewriting. We'll see if that helps. Switch Virtualization providers On the off chance this was related to Hyper-V in some way (we do host Linux VMs on it), we switched to VMWare Server. No change. Switch host model We've reached the end of our troubleshooting rope and are now formally involving Microsoft support. They recommended changing the host model: http://en.wikipedia.org/wiki/Host_model http://technet.microsoft.com/en-us/magazine/2007.09.cableguy.aspx We did that, and.. we'll see.

    Read the article

  • Set up tunnel to HE.net and now only ipv6.google.com works, but other sites ping fine.

    - by AndrejaKo
    I'm setting up IPv6 using my router which is running OpenWRT, version Backfire 10.03.1-rc4. I made a tunnel using Hurricane Electric's tunnel broker and set it up on the router and I'm using RADVD to hand out IPv6 addresses. My problem is that on computers on the network, I can only access ipv6.google.com using a browser, but other sites seem to be loading forever and won't open in any browser. I can ping and traceroute to them fine, but can't open them with a browser. I can open any site normally with a browser from the router. Stopping firewall service on the router doesn't help, so it's probably not a firewall issue. All AAAA records resolve fine, so it's probably not a DNS issue. Computers on the network get their IPv6 addresses fine, so it's probably not a radvd issue. Similar setup worked fine for SixXs, but I'm having problems with my PoP there, so I decided to move to HE. Here are some traceroutes: From a client computer: Tracing route to ipv6.he.net [2001:470:0:64::2] over a maximum of 30 hops: 1 <1 ms 1 ms 1 ms 2001:470:1f0b:de5::1 2 62 ms 63 ms 62 ms andrejako-1.tunnel.tserv6.fra1.ipv6.he.net [2001:470:1f0a:de5::1] 3 60 ms 60 ms 63 ms gige-g2-4.core1.fra1.he.net [2001:470:0:69::1] 4 63 ms 68 ms 68 ms 10gigabitethernet1-4.core1.ams1.he.net [2001:470:0:47::1] 5 84 ms 74 ms 76 ms 10gigabitethernet1-4.core1.lon1.he.net [2001:470:0:3f::1] 6 146 ms 147 ms 151 ms 10gigabitethernet4-4.core1.nyc4.he.net [2001:470:0:128::1] 7 200 ms 198 ms 202 ms 10gigabitethernet5-3.core1.lax1.he.net [2001:470:0:10e::1] 8 219 ms * 210 ms 10gigabitethernet2-2.core1.fmt2.he.net [2001:470:0:18d::1] 9 221 ms 338 ms 209 ms gige-g4-18.core1.fmt1.he.net [2001:470:0:2d::1] 10 206 ms 210 ms 207 ms ipv6.he.net [2001:470:0:64::2] Trace complete. and another from a cliet computer Tracing route to whatismyipv6.com [2001:4870:a24f:2::90] over a maximum of 30 hops: 1 7 ms 1 ms 1 ms 2001:470:1f0b:de5::1 2 69 ms 70 ms 63 ms AndrejaKo-1.tunnel.tserv6.fra1.ipv6.he.net [2001:470:1f0a:de5::1] 3 57 ms 65 ms 58 ms gige-g2-4.core1.fra1.he.net [2001:470:0:69::1] 4 73 ms 74 ms 75 ms 10gigabitethernet1-4.core1.ams1.he.net [2001:470:0:47::1] 5 71 ms 74 ms 76 ms 10gigabitethernet1-4.core1.lon1.he.net [2001:470:0:3f::1] 6 141 ms 149 ms 148 ms 10gigabitethernet2-3.core1.nyc4.he.net [2001:470:0:3e::1] 7 141 ms 147 ms 143 ms 10gigabitethernet1-2.core1.nyc1.he.net [2001:470:0:37::2] 8 144 ms 145 ms 142 ms 2001:504:1::a500:4323:1 9 226 ms 225 ms 218 ms 2001:4870:a240::2 10 220 ms 224 ms 219 ms 2001:4870:a240::2 11 219 ms 218 ms 220 ms 2001:4870:a24f::2 12 221 ms 222 ms 220 ms www.whatismyipv6.com [2001:4870:a24f:2::90] Trace complete. Here's some firewall info on the router: root@OpenWrt:/# iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 syn_flood tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 input_rule all -- 0.0.0.0/0 0.0.0.0/0 input all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) target prot opt source destination zone_wan_MSSFIX all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED forwarding_rule all -- 0.0.0.0/0 0.0.0.0/0 forward all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 output_rule all -- 0.0.0.0/0 0.0.0.0/0 output all -- 0.0.0.0/0 0.0.0.0/0 Chain forward (1 references) target prot opt source destination zone_lan_forward all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_forward all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_forward all -- 0.0.0.0/0 0.0.0.0/0 Chain forwarding_lan (1 references) target prot opt source destination Chain forwarding_rule (1 references) target prot opt source destination nat_reflection_fwd all -- 0.0.0.0/0 0.0.0.0/0 Chain forwarding_wan (1 references) target prot opt source destination Chain input (1 references) target prot opt source destination zone_lan all -- 0.0.0.0/0 0.0.0.0/0 zone_wan all -- 0.0.0.0/0 0.0.0.0/0 zone_wan all -- 0.0.0.0/0 0.0.0.0/0 Chain input_lan (1 references) target prot opt source destination Chain input_rule (1 references) target prot opt source destination Chain input_wan (1 references) target prot opt source destination Chain nat_reflection_fwd (1 references) target prot opt source destination ACCEPT tcp -- 192.168.1.0/24 192.168.1.2 tcp dpt:80 Chain output (1 references) target prot opt source destination zone_lan_ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain output_rule (1 references) target prot opt source destination Chain reject (7 references) target prot opt source destination REJECT tcp -- 0.0.0.0/0 0.0.0.0/0 reject-with tcp-reset REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain syn_flood (1 references) target prot opt source destination RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 limit: avg 25/sec burst 50 DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan (1 references) target prot opt source destination input_lan all -- 0.0.0.0/0 0.0.0.0/0 zone_lan_ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan_ACCEPT (2 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan_DROP (0 references) target prot opt source destination DROP all -- 0.0.0.0/0 0.0.0.0/0 DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan_MSSFIX (0 references) target prot opt source destination TCPMSS tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 TCPMSS clamp to PMTU Chain zone_lan_REJECT (1 references) target prot opt source destination reject all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan_forward (1 references) target prot opt source destination zone_wan_ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 forwarding_lan all -- 0.0.0.0/0 0.0.0.0/0 zone_lan_REJECT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan (2 references) target prot opt source destination ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:68 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ACCEPT 41 -- 0.0.0.0/0 0.0.0.0/0 input_wan all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_REJECT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan_ACCEPT (2 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan_DROP (0 references) target prot opt source destination DROP all -- 0.0.0.0/0 0.0.0.0/0 DROP all -- 0.0.0.0/0 0.0.0.0/0 DROP all -- 0.0.0.0/0 0.0.0.0/0 DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan_MSSFIX (1 references) target prot opt source destination TCPMSS tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 TCPMSS clamp to PMTU TCPMSS tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 TCPMSS clamp to PMTU Chain zone_wan_REJECT (2 references) target prot opt source destination reject all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan_forward (2 references) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 192.168.1.2 forwarding_wan all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_REJECT all -- 0.0.0.0/0 0.0.0.0/0 Here's some routing info: root@OpenWrt:/# ip -f inet6 route 2001:470:1f0a:de5::/64 via :: dev 6in4-henet proto kernel metric 256 mtu 1280 advmss 1220 hoplimit 0 2001:470:1f0b:de5::/64 dev br-lan proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 dev br-lan proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 dev eth0.1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 dev eth0.2 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 via :: dev 6in4-henet proto kernel metric 256 mtu 1280 advmss 1220 hoplimit 0 default dev 6in4-henet metric 1024 mtu 1280 advmss 1220 hoplimit 0 I have computers running windows 7 SP1 and openSUSE 11.3 and all of them have same problem. I also made a thread about this on HE's forum, but it seems that people there are out of ideas what to do.

    Read the article

  • What other tool is using my hotkey?

    - by Sammy
    I use Greenshot for screenshots, and it's been nagging about some other software tool using the same hotkey. I started receiving this warning message about two days ago. It shows up each time I reboot and log on to Windows. The hotkey(s) "Ctrl + Shift + PrintScreen" could not be registered. This problem is probably caused by another tool claiming usage of the same hotkey(s)! You could either change your hotkey settings or deactivate/change the software making use of the hotkey(s). What's this all about? The only software I recently installed is CPU-Z Core Temp Speed Fan HD Tune Epson Print CD NetStress What I would like to know is how to find out what other tool is causing this conflict? Do I really have to uninstall each program, one by one, until there is no conflict anymore? I see no option for customizing any hotkeys in CPU-Z, and according to docs there are only a few keyboard shortcuts. These are F5 through F9, but they are no hotkeys. There is nothing in Core Temp, and from what I can see... nothing in Speed Fan. Is any of these programs known to use Ctrl + Shift + PrintScreen hotkey for screenshots? I am actually suspecting the Dropbox client. I think I saw a warning recently coming from Dropbox program, something to do with hotkeys or keyboard shortcuts. I see that it has an option for sharing screenshots under Preferences menu, but I see no option for hotkeys. Core Temp actually also has an option for taking screenshots (F9) but it's just that - a keyboard shortcut, not a hotkey. And again, there's no option actually for changing this setting in Options/Settings menu. How do you resolve this type of conflicts? Are there any general methods you can use to pinpoint the second conflicting software? Like... is there some Windows registry key that holds the hotkeys? Or is it just down to mere luck and trial and error? Addendum I forgot to mention, when I do use the Ctrl + Shift + PrintScreen hotkey, what happens is that the Greenshot context menu shows up, asking me where I want to save the screenshot. So it appears to be working. But I am still getting the darn warning every time I reboot and log on to Windows?! I actually tried changing the key bindings in Greenshot preferences, but after a reboot it seems to have returned back to the settings I had previously. Update I can't see any hotkey conflicts in the Widnows Hotkey Explorer. The aforementioned hotkey is reserved by Greenshot, and I don't see any other program using the same hotkey binding. But when I went into Greenshot preferences, this is what I discovered. As you can see it's the Greenshot itself that uses the same hotkey twice! I guess that's why no other program was listed above as using this hotkey. But how can Greenshot be so stupid to use the same hotkey more than once? I didn't do this! It's not my fault... I'm not that stupid. This is what it's set to right now: Capture full screen: Ctrl + Skift + Prntscrn Capture window: Alt + Prntscrn Capture region: Ctrl + Prntscrn Capture last region: Skift + Prntscrn Capture Internet Explorer: Ctrl + Skift + Prntscrn And this is my preferred setting: Capture full screen: Prntscrn Capture window: Alt + Prntscrn Capture region: Ctrl + Prntscrn Capture last region: Capture Internet Explorer: I don't use any hotkey for "last region" and IE. But when I set this to my liking, as listed here, Greenshot gives me the same warning message, even as I tab through the hotkey entry fields. Sometimes it even gives me the warning when I just click Cancel button. This is really crazy! On the side note... You might have noticed that I have "update check" set to 0 (zero). This is because, in my experience, Greenshot changes all or only some of my preferences back to default settings whenever it automatically updates to a new version. So I opted to stay off updates to get rid of the problem. It has done so for the past three updates or so. I hoped to receive a new update that would fix the issue, but I think it still reverts back to default settings after each update to a new version, including setting default hotkeys. Update 2 I'll give you just one example of how Greenshot behaves. This is the dialog I have in front of me right now. As you can see, I have removed the last two hotkeys and changed the first one to my own liking. While I was clicking in the fields and removing the two hotkeys I was getting the warning message. So let's say I click in the "capture last region" field. Then I get this: Note that none of the entries include "Ctrl + Shift + PrintScreen" that it's warning about. Now I will change all the hotkeys so I get something like this: So now I'm using QWERTY letters for binding, like Ctrl+Alt+Q, Ctrl+Alt+W and so on. As far as I know no Windows program is using these. While I was clicking through the different fields it was giving me the warning. Now when I try to click OK to save the changes, it once again gives me a warning about "ctrl + shift + printscreen". Update 3 After setting the above key bindings (QWERTY) and saving changes, and then rebooting, the conflict seems to have been resolved. I was then able to set following key bindings. Capture full screen: Prntscrn Capture window: Alt + Prntscrn Capture region: Ctrl + Prntscrn I was not prompted with the warning message this time. Perhaps changing key binding required a system reboot? Sounds far fetched but that appears to be the case. I'm still not sure what caused this conflict, but I know for sure that it started after installing aforementioned programs. It might just have to do with Greenshot itself, and not some other program. Like I said, I know from experience that Greenshot likes to mess with users' settings after each update. I wouldn't be surprised if it was actually silently updated, even though I have specified not to check for updates, then it changed the key bindings back to defaults and caused a conflict with the hotkeys that were registered with the operating system previously. I rarely reboot the system, so that could have added to the conflict. Next time if I see this I will run Hotkey Explorer immediately and see if there is another program causing the conflict.

    Read the article

  • DNS resolution problems; dig SERVFAIL error

    - by JustinP
    I'm setting up a couple of dedicated servers, and having problems setting up my nameservers properly. One of these is a LEMP server (LAMP with nginx in place of Apache), and the other will function solely as an email server, running exim/dovecot/ASSP antispam (no Apache). The LEMP server is CentOS 5.5, with no control panel, while the email server is CentOS 5.5 as well, with cPanel/WHM. So, I've had problems getting DNS set up properly. I have two domains, each one pointing to one of these servers. The nameservers are registered correctly with the domain registrar, and the nameserver IPs are entered correctly as well. I've spoken to tech support at the registrar and they confirm that everything is set up on their end. Not knowing much about DNS, I googled nameservers and DNS until I nearly went blind, and spent hours messing with the configuration. Eventually, I got the LEMP server's DNS working properly (no cPanel). Pleased with this triumph, I'm trying to mimic that configuration and repeat the process with the email server, and it's just not happening. The nameserver starts and stops, but the domain doesn't resolve. Things I have tried Going through standard procedures to set up DNS in WHM Clearing all DNS information, uninstalling BIND, then reinstalling all of that and again going through WHM procedures for setting up DNS Clearing all DNS information, and setting up BIND via shell (completely outside of cPanel) by using my config and zone files from the LEMP server as a template named runs just fine, but nothing is resolving. When I "dig any example.com" I get a SERVFAIL message. Nslookups return no information. Here are my config and zone files. named.conf controls { inet 127.0.0.1 allow { localhost; } keys { coretext-key; }; }; options { listen-on port 53 { any; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; // Those options should be used carefully because they disable port // randomization // query-source port 53; // query-source-v6 port 53; allow-query { any; }; allow-query-cache { any; }; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; view "localhost_resolver" { match-clients { 127.0.0.0/24; }; match-destinations { localhost; }; recursion yes; //zone "." IN { // type hint; // file "/var/named/named.ca"; //}; include "/etc/named.rfc1912.zones"; }; view "internal" { /* This view will contain zones you want to serve only to "internal" clients that connect via your directly attached LAN interfaces - "localnets" . */ match-clients { localnets; }; match-destinations { localnets; }; recursion yes; zone "." IN { type hint; file "/var/named/named.ca"; }; // include "/var/named/named.rfc1912.zones"; // you should not serve your rfc1912 names to non-localhost clients. // These are your "authoritative" internal zones, and would probably // also be included in the "localhost_resolver" view above : zone "example.com" { type master; file "data/db.example.com"; }; zone "3.2.1.in-addr.arpa" { type master; file "data/db.1.2.3"; }; }; view "external" { /* This view will contain zones you want to serve only to "external" clients * that have addresses that are not on your directly attached LAN interface subnets: */ match-clients { any; }; match-destinations { any; }; recursion no; // you'd probably want to deny recursion to external clients, so you don't // end up providing free DNS service to all takers allow-query-cache { none; }; // Disable lookups for any cached data and root hints // all views must contain the root hints zone: //include "/etc/named.rfc1912.zones"; zone "." IN { type hint; file "/var/named/named.ca"; }; zone "example.com" { type master; file "data/db.example.com"; }; zone "3.2.1.in-addr.arpa" { type master; file "data/db.1.2.3"; }; }; include "/etc/rndc.key"; db.example.com $TTL 1D ; ; Zone file for example.com ; ; Mandatory minimum for a working domain ; @ IN SOA ns1.example.com. contact.example.com. ( 2011042905 ; serial 8H ; refresh 2H ; retry 4W ; expire 1D ; default_ttl ) NS ns1.example.com. NS ns2.example.com. ns1 A 1.2.3.4 ns2 A 1.2.3.5 example.com. A 1.2.3.4 localhost A 127.0.0.1 www CNAME example.com. mail CNAME example.com. ; db.1.2.3 $TTL 1D $ORIGIN 3.2.1.in-addr.arpa. @ IN SOA ns1.example.com contact.example.com. ( 2011042908 ; 8H ; 2H ; 4W ; 1D ; ) NS ns1.example.com. NS ns2.example.com. 4 PTR hostname.example.com. 5 PTR hostname.example.com. ; Also of note: both of these servers are managed. Tech support is very responsive, and largely useless. Hours go by with them asking me questions to narrow down what could be wrong, then they pass the ticket to the tech on the next shift, who ignores everything that's happened already and spend his whole shift asking all the same questions the last guy asked. So, in summary: *Nameservers, with IPs, are correctly registered with domain registrar *named is configured and running *...and must not be configured correctly, because nothing resolves. Any help would be great. I changed domains and IPs in the files to generics, but let me know if you need to know the domain in question. Thanks! UPDATE I found that I didn't have 127.0.0.1 in /etc/resolv.conf, so I added it, along with my two public IPs that I have named listening on. resolv.conf search www.example.com example.com nameserver 127.0.0.1 nameserver 7.8.9.10 ;Was in here by default, authoritative nameserver of hosting company nameserver 1.2.3.4 ;Public IP #1 nameserver 1.2.3.5 ;Public IP #2 Now when I DIG example.com from the host, it resolves. If I try to DIG from my other server (in the same datacenter), or from the internet, it times out or I get SERVFAIL.

    Read the article

  • Why is Java EE 6 better than Spring ?

    - by arungupta
    Java EE 6 was released over 2 years ago and now there are 14 compliant application servers. In all my talks around the world, a question that is frequently asked is Why should I use Java EE 6 instead of Spring ? There are already several blogs covering that topic: Java EE wins over Spring by Bill Burke Why will I use Java EE instead of Spring in new Enterprise Java projects in 2012 ? by Kai Waehner (more discussion on TSS) Spring to Java EE migration (Part 1 and 2, 3 and 4 coming as well) by David Heffelfinger Spring to Java EE - A Migration Experience by Lincoln Baxter Migrating Spring to Java EE 6 by Bert Ertman and Paul Bakker at NLJUG Moving from Spring to Java EE 6 - The Age of Frameworks is Over at TSS Java EE vs Spring Shootout by Rohit Kelapure and Reza Rehman at JavaOne 2011 Java EE 6 and the Ewoks by Murat Yener Definite excuse to avoid Spring forever - Bert Ertman and Arun Gupta I will try to share my perspective in this blog. First of all, I'd like to start with a note: Thank you Spring framework for filling the interim gap and providing functionality that is now included in the mainstream Java EE 6 application servers. The Java EE platform has evolved over the years learning from frameworks like Spring and provides all the functionality to build an enterprise application. Thank you very much Spring framework! While Spring was revolutionary in its time and is still very popular and quite main stream in the same way Struts was circa 2003, it really is last generation's framework - some people are even calling it legacy. However my theory is "code is king". So my approach is to build/take a simple Hello World CRUD application in Java EE 6 and Spring and compare the deployable artifacts. I started looking at the official tutorial Developing a Spring Framework MVC Application Step-by-Step but it is using the older version 2.5. I wasn't able to find any updated version in the current 3.1 release. Next, I downloaded Spring Tool Suite and thought that would provide some template samples to get started. A least a quick search did not show any handy tutorials - either video or text-based. So I searched and found a link to their SVN repository at src.springframework.org/svn/spring-samples/. I tried the "mvc-basic" sample and the generated WAR file was 4.43 MB. While it was named a "basic" sample it seemed to come with 19 different libraries bundled but it was what I could find: ./WEB-INF/lib/aopalliance-1.0.jar./WEB-INF/lib/hibernate-validator-4.1.0.Final.jar./WEB-INF/lib/jcl-over-slf4j-1.6.1.jar./WEB-INF/lib/joda-time-1.6.2.jar./WEB-INF/lib/joda-time-jsptags-1.0.2.jar./WEB-INF/lib/jstl-1.2.jar./WEB-INF/lib/log4j-1.2.16.jar./WEB-INF/lib/slf4j-api-1.6.1.jar./WEB-INF/lib/slf4j-log4j12-1.6.1.jar./WEB-INF/lib/spring-aop-3.0.5.RELEASE.jar./WEB-INF/lib/spring-asm-3.0.5.RELEASE.jar./WEB-INF/lib/spring-beans-3.0.5.RELEASE.jar./WEB-INF/lib/spring-context-3.0.5.RELEASE.jar./WEB-INF/lib/spring-context-support-3.0.5.RELEASE.jar./WEB-INF/lib/spring-core-3.0.5.RELEASE.jar./WEB-INF/lib/spring-expression-3.0.5.RELEASE.jar./WEB-INF/lib/spring-web-3.0.5.RELEASE.jar./WEB-INF/lib/spring-webmvc-3.0.5.RELEASE.jar./WEB-INF/lib/validation-api-1.0.0.GA.jar And it is not even using any database! The app deployed fine on GlassFish 3.1.2 but the "@Controller Example" link did not work as it was missing the context root. With a bit of tweaking I could deploy the application and assume that the account got created because no error was displayed in the browser or server log. Next I generated the WAR for "mvc-ajax" and the 5.1 MB WAR had 20 JARs (1 removed, 2 added): ./WEB-INF/lib/aopalliance-1.0.jar./WEB-INF/lib/hibernate-validator-4.1.0.Final.jar./WEB-INF/lib/jackson-core-asl-1.6.4.jar./WEB-INF/lib/jackson-mapper-asl-1.6.4.jar./WEB-INF/lib/jcl-over-slf4j-1.6.1.jar./WEB-INF/lib/joda-time-1.6.2.jar./WEB-INF/lib/jstl-1.2.jar./WEB-INF/lib/log4j-1.2.16.jar./WEB-INF/lib/slf4j-api-1.6.1.jar./WEB-INF/lib/slf4j-log4j12-1.6.1.jar./WEB-INF/lib/spring-aop-3.0.5.RELEASE.jar./WEB-INF/lib/spring-asm-3.0.5.RELEASE.jar./WEB-INF/lib/spring-beans-3.0.5.RELEASE.jar./WEB-INF/lib/spring-context-3.0.5.RELEASE.jar./WEB-INF/lib/spring-context-support-3.0.5.RELEASE.jar./WEB-INF/lib/spring-core-3.0.5.RELEASE.jar./WEB-INF/lib/spring-expression-3.0.5.RELEASE.jar./WEB-INF/lib/spring-web-3.0.5.RELEASE.jar./WEB-INF/lib/spring-webmvc-3.0.5.RELEASE.jar./WEB-INF/lib/validation-api-1.0.0.GA.jar 2 more JARs for just doing Ajax. Anyway, deploying this application gave the following error: Caused by: java.lang.NoSuchMethodError: org.codehaus.jackson.map.SerializationConfig.<init>(Lorg/codehaus/jackson/map/ClassIntrospector;Lorg/codehaus/jackson/map/AnnotationIntrospector;Lorg/codehaus/jackson/map/introspect/VisibilityChecker;Lorg/codehaus/jackson/map/jsontype/SubtypeResolver;)V    at org.springframework.samples.mvc.ajax.json.ConversionServiceAwareObjectMapper.<init>(ConversionServiceAwareObjectMapper.java:20)    at org.springframework.samples.mvc.ajax.json.JacksonConversionServiceConfigurer.postProcessAfterInitialization(JacksonConversionServiceConfigurer.java:40)    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyBeanPostProcessorsAfterInitialization(AbstractAutowireCapableBeanFactory.java:407) Seems like some incorrect repos in the "pom.xml". Next one is "mvc-showcase" and the 6.49 MB WAR now has 28 JARs as shown below: ./WEB-INF/lib/aopalliance-1.0.jar./WEB-INF/lib/aspectjrt-1.6.10.jar./WEB-INF/lib/commons-fileupload-1.2.2.jar./WEB-INF/lib/commons-io-2.0.1.jar./WEB-INF/lib/el-api-2.2.jar./WEB-INF/lib/hibernate-validator-4.1.0.Final.jar./WEB-INF/lib/jackson-core-asl-1.8.1.jar./WEB-INF/lib/jackson-mapper-asl-1.8.1.jar./WEB-INF/lib/javax.inject-1.jar./WEB-INF/lib/jcl-over-slf4j-1.6.1.jar./WEB-INF/lib/jdom-1.0.jar./WEB-INF/lib/joda-time-1.6.2.jar./WEB-INF/lib/jstl-api-1.2.jar./WEB-INF/lib/jstl-impl-1.2.jar./WEB-INF/lib/log4j-1.2.16.jar./WEB-INF/lib/rome-1.0.0.jar./WEB-INF/lib/slf4j-api-1.6.1.jar./WEB-INF/lib/slf4j-log4j12-1.6.1.jar./WEB-INF/lib/spring-aop-3.1.0.RELEASE.jar./WEB-INF/lib/spring-asm-3.1.0.RELEASE.jar./WEB-INF/lib/spring-beans-3.1.0.RELEASE.jar./WEB-INF/lib/spring-context-3.1.0.RELEASE.jar./WEB-INF/lib/spring-context-support-3.1.0.RELEASE.jar./WEB-INF/lib/spring-core-3.1.0.RELEASE.jar./WEB-INF/lib/spring-expression-3.1.0.RELEASE.jar./WEB-INF/lib/spring-web-3.1.0.RELEASE.jar./WEB-INF/lib/spring-webmvc-3.1.0.RELEASE.jar./WEB-INF/lib/validation-api-1.0.0.GA.jar The app at least deployed and showed results this time. But still no database! Next I tried building "jpetstore" and got the error: [ERROR] Failed to execute goal on project org.springframework.samples.jpetstore:Could not resolve dependencies for project org.springframework.samples:org.springframework.samples.jpetstore:war:1.0.0-SNAPSHOT: Failed to collect dependencies for [commons-fileupload:commons-fileupload:jar:1.2.1 (compile), org.apache.struts:com.springsource.org.apache.struts:jar:1.2.9 (compile), javax.xml.rpc:com.springsource.javax.xml.rpc:jar:1.1.0 (compile), org.apache.commons:com.springsource.org.apache.commons.dbcp:jar:1.2.2.osgi (compile), commons-io:commons-io:jar:1.3.2 (compile), hsqldb:hsqldb:jar:1.8.0.7 (compile), org.apache.tiles:tiles-core:jar:2.2.0 (compile), org.apache.tiles:tiles-jsp:jar:2.2.0 (compile), org.tuckey:urlrewritefilter:jar:3.1.0 (compile), org.springframework:spring-webmvc:jar:3.0.0.BUILD-SNAPSHOT (compile), org.springframework:spring-orm:jar:3.0.0.BUILD-SNAPSHOT (compile), org.springframework:spring-context-support:jar:3.0.0.BUILD-SNAPSHOT (compile), org.springframework.webflow:spring-js:jar:2.0.7.RELEASE (compile), org.apache.ibatis:com.springsource.com.ibatis:jar:2.3.4.726 (runtime), com.caucho:com.springsource.com.caucho:jar:3.2.1 (compile), org.apache.axis:com.springsource.org.apache.axis:jar:1.4.0 (compile), javax.wsdl:com.springsource.javax.wsdl:jar:1.6.1 (compile), javax.servlet:jstl:jar:1.2 (runtime), org.aspectj:aspectjweaver:jar:1.6.5 (compile), javax.servlet:servlet-api:jar:2.5 (provided), javax.servlet.jsp:jsp-api:jar:2.1 (provided), junit:junit:jar:4.6 (test)]: Failed to read artifact descriptor for org.springframework:spring-webmvc:jar:3.0.0.BUILD-SNAPSHOT: Could not transfer artifact org.springframework:spring-webmvc:pom:3.0.0.BUILD-SNAPSHOT from/to JBoss repository (http://repository.jboss.com/maven2): Access denied to: http://repository.jboss.com/maven2/org/springframework/spring-webmvc/3.0.0.BUILD-SNAPSHOT/spring-webmvc-3.0.0.BUILD-SNAPSHOT.pom It appears the sample is broken - maybe I was pulling from the wrong repository - would be great if someone were to point me at a good target to use here. With a 50% hit on samples in this repository, I started searching through numerous blogs, most of which have either outdated information (using XML-heavy Spring 2.5), some piece of configuration (which is a typical "feature" of Spring) is missing, or too much complexity in the sample. I finally found this blog that worked like a charm. This blog creates a trivial Spring MVC 3 application using Hibernate and MySQL. This application performs CRUD operations on a single table in a database using typical Spring technologies.  I downloaded the sample code from the blog, deployed it on GlassFish 3.1.2 and could CRUD the "person" entity. The source code for this application can be downloaded here. More details on the application statistics below. And then I built a similar CRUD application in Java EE 6 using NetBeans wizards in a couple of minutes. The source code for the application can be downloaded here and the WAR here. The Spring Source Tool Suite may also offer similar wizard-driven capabilities but this blog focus primarily on comparing the runtimes. The lack of STS tutorials was slightly disappointing as well. NetBeans however has tons of text-based and video tutorials and tons of material even by the community. One more bit on the download size of tools bundle ... NetBeans 7.1.1 "All" is 211 MB (which includes GlassFish and Tomcat) Spring Tool Suite  2.9.0 is 347 MB (~ 65% bigger) This blog is not about the tooling comparison so back to the Java EE 6 version of the application .... In order to run the Java EE version on GlassFish, copy the MySQL Connector/J to glassfish3/glassfish/domains/domain1/lib/ext directory and create a JDBC connection pool and JDBC resource as: ./bin/asadmin create-jdbc-connection-pool --datasourceclassname \\ com.mysql.jdbc.jdbc2.optional.MysqlDataSource --restype \\ javax.sql.DataSource --property \\ portNumber=3306:user=mysql:password=mysql:databaseName=mydatabase \\ myConnectionPool ./bin/asadmin create-jdbc-resource --connectionpoolid myConnectionPool jdbc/myDataSource I generated WARs for the two projects and the table below highlights some differences between them: Java EE 6 Spring WAR File Size 0.021030 MB 10.87 MB (~516x) Number of files 20 53 (> 2.5x) Bundled libraries 0 36 Total size of libraries 0 12.1 MB XML files 3 5 LoC in XML files 50 (11 + 15 + 24) 129 (27 + 46 + 16 + 11 + 19) (~ 2.5x) Total .properties files 1 Bundle.properties 2 spring.properties, log4j.properties Cold Deploy 5,339 ms 11,724 ms Second Deploy 481 ms 6,261 ms Third Deploy 528 ms 5,484 ms Fourth Deploy 484 ms 5,576 ms Runtime memory ~73 MB ~101 MB Some points worth highlighting from the table ... 516x WAR file, 10x deployment time - With 12.1 MB of libraries (for a very basic application) bundled in your application, the WAR file size and the deployment time will naturally go higher. The WAR file for Spring-based application is 516x bigger and the deployment time is double during the first deployment and ~ 10x during subsequent deployments. The Java EE 6 application is fully portable and will run on any Java EE 6 compliant application server. 36 libraries in the WAR - There are 14 Java EE 6 compliant application servers today. Each of those servers provide all the functionality like transactions, dependency injection, security, persistence, etc typically required of an enterprise or web application. There is no need to bundle 36 libraries worth 12.1 MB for a trivial CRUD application. These 14 compliant application servers provide all the functionality baked in. Now you can also deploy these libraries in the container but then you don't get the "portability" offered by Spring in that case. Does your typical Spring deployment actually do that ? 3x LoC in XML - The number of XML files is about 1.6x and the LoC is ~ 2.5x. So much XML seems circa 2003 when the Java language had no annotations. The XML files can be further reduced, e.g. faces-config.xml can be replaced without providing i18n, but I just want to compare stock applications. Memory usage - Both the applications were deployed on default GlassFish 3.1.2 installation and any additional memory consumed as part of deployment/access was attributed to the application. This is by no means scientific but at least provides an initial ballpark. This area definitely needs more investigation. Another table that compares typical Java EE 6 compliant application servers and the custom-stack created for a Spring application ... Java EE 6 Spring Web Container ? 53 MB (tcServer 2.6.3 Developer Edition) Security ? 12 MB (Spring Security 3.1.0) Persistence ? 6.3 MB (Hibernate 4.1.0, required) Dependency Injection ? 5.3 MB (Framework) Web Services ? 796 KB (Spring WS 2.0.4) Messaging ? 3.4 MB (RabbitMQ Server 2.7.1) 936 KB (Java client 936) OSGi ? 1.3 MB (Spring OSGi 1.2.1) GlassFish and WebLogic (starting at 33 MB) 83.3 MB There are differentiating factors on both the stacks. But most of the functionality like security, persistence, and dependency injection is baked in a Java EE 6 compliant application server but needs to be individually managed and patched for a Spring application. This very quickly leads to a "stack explosion". The Java EE 6 servers are tested extensively on a variety of platforms in different combinations whereas a Spring application developer is responsible for testing with different JDKs, Operating Systems, Versions, Patches, etc. Oracle has both the leading OSS lightweight server with GlassFish and the leading enterprise Java server with WebLogic Server, both Java EE 6 and both with lightweight deployment options. The Web Container offered as part of a Java EE 6 application server not only deploys your enterprise Java applications but also provide operational management, diagnostics, and mission-critical capabilities required by your applications. The Java EE 6 platform also introduced the Web Profile which is a subset of the specifications from the entire platform. It is targeted at developers of modern web applications offering a reasonably complete stack, composed of standard APIs, and is capable out-of-the-box of addressing the needs of a large class of Web applications. As your applications grow, the stack can grow to the full Java EE 6 platform. The GlassFish Server Web Profile starting at 33MB (smaller than just the non-standard tcServer) provides most of the functionality typically required by a web application. WebLogic provides battle-tested functionality for a high throughput, low latency, and enterprise grade web application. No individual managing or patching, all tested and commercially supported for you! Note that VMWare does have a server, tcServer, but it is non-standard and not even certified to the level of the standard Web Profile most customers expect these days. Customers who choose this risk proprietary lock-in since VMWare does not seem to want to formally certify with either Java EE 6 Enterprise Platform or with Java EE 6 Web Profile but of course it would be great if they were to join the community and help their customers reduce the risk of deploying on VMWare software. Some more points to help you decide choose between Java EE 6 and Spring ... Freedom to choose container - There are 14 Java EE 6 compliant application servers today, with a variety of open source and commercial offerings. A Java EE 6 application can be deployed on any of those containers. So if you deployed your application on GlassFish today and would like to scale up with your demands then you can deploy the same application to WebLogic. And because of the portability of a Java EE 6 application, you can even take it a different vendor altogether. Spring requires a runtime which could be any of these app servers as well. But why use Spring when all the required functionality is already baked into the application server itself ? Spring also has a different definition of portability where they claim to bundle all the libraries in the WAR file and move to any application server. But we saw earlier how bloated that archive could be. The equivalent features in Spring runtime offerings (mainly tcServer) are not all open source, not as mature, and often require manual assembly.  Vendor choice - The Java EE 6 platform is created using the Java Community Process where all the big players like Oracle, IBM, RedHat, and Apache are conritbuting to make the platform successful. Each application server provides the basic Java EE 6 platform compliance and has its own competitive offerings. This allows you to choose an application server for deploying your Java EE 6 applications. If you are not happy with the support or feature of one vendor then you can move your application to a different vendor because of the portability promise offered by the platform. Spring is a set of products from a single company, one price book, one support organization, one sustaining organization, one sales organization, etc. If any of those cause a customer headache, where do you go ? Java EE, backed by multiple vendors, is a safer bet for those that are risk averse. Production support - With Spring, typically you need to get support from two vendors - VMWare and the container provider. With Java EE 6, all of this is typically provided by one vendor. For example, Oracle offers commercial support from systems, operating systems, JDK, application server, and applications on top of them. VMWare certainly offers complete production support but do you really want to put all your eggs in one basket ? Do you really use tcServer ? ;-) Maintainability - With Spring, you are likely building your own distribution with multiple JAR files, integrating, patching, versioning, etc of all those components. Spring's claim is that multiple JAR files allow you to go à la carte and pick the latest versions of different components. But who is responsible for testing whether all these versions work together ? Yep, you got it, its YOU! If something does not work, who patches and maintains the JARs ? Of course, you! Commercial support for such a configuration ? On your own! The Java EE application servers manage all of this for you and provide a well-tested and commercially supported bundle. While it is always good to realize that there is something new and improved that updates and replaces older frameworks like Spring, the good news is not only does a Java EE 6 container offer what is described here, most also will let you deploy and run your Spring applications on them while you go through an upgrade to a more modern architecture. End result, you get the best of both worlds - keeping your legacy investment but moving to a more agile, lightweight world of Java EE 6. A message to the Spring lovers ... The complexity in J2EE 1.2, 1.3, and 1.4 led to the genesis of Spring but that was in 2004. This is 2012 and the name has changed to "Java EE 6" :-) There are tons of improvements in the Java EE platform to make it easy-to-use and powerful. Some examples: Adding @Stateless on a POJO makes it an EJB EJBs can be packaged in a WAR with no special packaging or deployment descriptors "web.xml" and "faces-config.xml" are optional in most of the common cases Typesafe dependency injection is now part of the Java EE platform Add @Path on a POJO allows you to publish it as a RESTful resource EJBs can be used as backing beans for Facelets-driven JSF pages providing full MVC Java EE 6 WARs are known to be kilobytes in size and deployed in milliseconds Tons of other simplifications in the platform and application servers So if you moved away from J2EE to Spring many years ago and have not looked at Java EE 6 (which has been out since Dec 2009) then you should definitely try it out. Just be at least aware of what other alternatives are available instead of restricting yourself to one stack. Here are some workshops and screencasts worth trying: screencast #37 shows how to build an end-to-end application using NetBeans screencast #36 builds the same application using Eclipse javaee-lab-feb2012.pdf is a 3-4 hours self-paced hands-on workshop that guides you to build a comprehensive Java EE 6 application using NetBeans Each city generally has a "spring cleanup" program every year. It allows you to clean up the mess from your house. For your software projects, you don't need to wait for an annual event, just get started and reduce the technical debt now! Move away from your legacy Spring-based applications to a lighter and more modern approach of building enterprise Java applications using Java EE 6. Watch this beautiful presentation that explains how to migrate from Spring -> Java EE 6: List of files in the Java EE 6 project: ./index.xhtml./META-INF./person./person/Create.xhtml./person/Edit.xhtml./person/List.xhtml./person/View.xhtml./resources./resources/css./resources/css/jsfcrud.css./template.xhtml./WEB-INF./WEB-INF/classes./WEB-INF/classes/Bundle.properties./WEB-INF/classes/META-INF./WEB-INF/classes/META-INF/persistence.xml./WEB-INF/classes/org./WEB-INF/classes/org/javaee./WEB-INF/classes/org/javaee/javaeemysql./WEB-INF/classes/org/javaee/javaeemysql/AbstractFacade.class./WEB-INF/classes/org/javaee/javaeemysql/Person.class./WEB-INF/classes/org/javaee/javaeemysql/Person_.class./WEB-INF/classes/org/javaee/javaeemysql/PersonController$1.class./WEB-INF/classes/org/javaee/javaeemysql/PersonController$PersonControllerConverter.class./WEB-INF/classes/org/javaee/javaeemysql/PersonController.class./WEB-INF/classes/org/javaee/javaeemysql/PersonFacade.class./WEB-INF/classes/org/javaee/javaeemysql/util./WEB-INF/classes/org/javaee/javaeemysql/util/JsfUtil.class./WEB-INF/classes/org/javaee/javaeemysql/util/PaginationHelper.class./WEB-INF/faces-config.xml./WEB-INF/web.xml List of files in the Spring 3.x project: ./META-INF ./META-INF/MANIFEST.MF./WEB-INF./WEB-INF/applicationContext.xml./WEB-INF/classes./WEB-INF/classes/log4j.properties./WEB-INF/classes/org./WEB-INF/classes/org/krams ./WEB-INF/classes/org/krams/tutorial ./WEB-INF/classes/org/krams/tutorial/controller ./WEB-INF/classes/org/krams/tutorial/controller/MainController.class ./WEB-INF/classes/org/krams/tutorial/domain ./WEB-INF/classes/org/krams/tutorial/domain/Person.class ./WEB-INF/classes/org/krams/tutorial/service ./WEB-INF/classes/org/krams/tutorial/service/PersonService.class ./WEB-INF/hibernate-context.xml ./WEB-INF/hibernate.cfg.xml ./WEB-INF/jsp ./WEB-INF/jsp/addedpage.jsp ./WEB-INF/jsp/addpage.jsp ./WEB-INF/jsp/deletedpage.jsp ./WEB-INF/jsp/editedpage.jsp ./WEB-INF/jsp/editpage.jsp ./WEB-INF/jsp/personspage.jsp ./WEB-INF/lib ./WEB-INF/lib/antlr-2.7.6.jar ./WEB-INF/lib/aopalliance-1.0.jar ./WEB-INF/lib/c3p0-0.9.1.2.jar ./WEB-INF/lib/cglib-nodep-2.2.jar ./WEB-INF/lib/commons-beanutils-1.8.3.jar ./WEB-INF/lib/commons-collections-3.2.1.jar ./WEB-INF/lib/commons-digester-2.1.jar ./WEB-INF/lib/commons-logging-1.1.1.jar ./WEB-INF/lib/dom4j-1.6.1.jar ./WEB-INF/lib/ejb3-persistence-1.0.2.GA.jar ./WEB-INF/lib/hibernate-annotations-3.4.0.GA.jar ./WEB-INF/lib/hibernate-commons-annotations-3.1.0.GA.jar ./WEB-INF/lib/hibernate-core-3.3.2.GA.jar ./WEB-INF/lib/javassist-3.7.ga.jar ./WEB-INF/lib/jstl-1.1.2.jar ./WEB-INF/lib/jta-1.1.jar ./WEB-INF/lib/junit-4.8.1.jar ./WEB-INF/lib/log4j-1.2.14.jar ./WEB-INF/lib/mysql-connector-java-5.1.14.jar ./WEB-INF/lib/persistence-api-1.0.jar ./WEB-INF/lib/slf4j-api-1.6.1.jar ./WEB-INF/lib/slf4j-log4j12-1.6.1.jar ./WEB-INF/lib/spring-aop-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-asm-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-beans-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-context-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-context-support-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-core-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-expression-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-jdbc-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-orm-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-tx-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-web-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-webmvc-3.0.5.RELEASE.jar ./WEB-INF/lib/standard-1.1.2.jar ./WEB-INF/lib/xml-apis-1.0.b2.jar ./WEB-INF/spring-servlet.xml ./WEB-INF/spring.properties ./WEB-INF/web.xml So, are you excited about Java EE 6 ? Want to get started now ? Here are some resources: Java EE 6 SDK (including runtime, samples, tutorials etc) GlassFish Server Open Source Edition 3.1.2 (Community) Oracle GlassFish Server 3.1.2 (Commercial) Java EE 6 using WebLogic 12c and NetBeans (Video) Java EE 6 with NetBeans and GlassFish (Video) Java EE with Eclipse and GlassFish (Video)

    Read the article

  • ASP.NET Web API Exception Handling

    - by Fredrik N
    When I talk about exceptions in my product team I often talk about two kind of exceptions, business and critical exceptions. Business exceptions are exceptions thrown based on “business rules”, for example if you aren’t allowed to do a purchase. Business exceptions in most case aren’t important to log into a log file, they can directly be shown to the user. An example of a business exception could be "DeniedToPurchaseException”, or some validation exceptions such as “FirstNameIsMissingException” etc. Critical Exceptions are all other kind of exceptions such as the SQL server is down etc. Those kind of exception message need to be logged and should not reach the user, because they can contain information that can be harmful if it reach out to wrong kind of users. I often distinguish business exceptions from critical exceptions by creating a base class called BusinessException, then in my error handling code I catch on the type BusinessException and all other exceptions will be handled as critical exceptions. This blog post will be about different ways to handle exceptions and how Business and Critical Exceptions could be handled. Web API and Exceptions the basics When an exception is thrown in a ApiController a response message will be returned with a status code set to 500 and a response formatted by the formatters based on the “Accept” or “Content-Type” HTTP header, for example JSON or XML. Here is an example:   public IEnumerable<string> Get() { throw new ApplicationException("Error!!!!!"); return new string[] { "value1", "value2" }; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The response message will be: HTTP/1.1 500 Internal Server Error Content-Length: 860 Content-Type: application/json; charset=utf-8 { "ExceptionType":"System.ApplicationException","Message":"Error!!!!!","StackTrace":" at ..."} .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   The stack trace will be returned to the client, this is because of making it easier to debug. Be careful so you don’t leak out some sensitive information to the client. So as long as you are developing your API, this is not harmful. In a production environment it can be better to log exceptions and return a user friendly exception instead of the original exception. There is a specific exception shipped with ASP.NET Web API that will not use the formatters based on the “Accept” or “Content-Type” HTTP header, it is the exception is the HttpResponseException class. Here is an example where the HttpReponseExcetpion is used: // GET api/values [ExceptionHandling] public IEnumerable<string> Get() { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.InternalServerError)); return new string[] { "value1", "value2" }; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The response will not contain any content, only header information and the status code based on the HttpStatusCode passed as an argument to the HttpResponseMessage. Because the HttpResponsException takes a HttpResponseMessage as an argument, we can give the response a content: public IEnumerable<string> Get() { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.InternalServerError) { Content = new StringContent("My Error Message"), ReasonPhrase = "Critical Exception" }); return new string[] { "value1", "value2" }; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   The code above will have the following response:   HTTP/1.1 500 Critical Exception Content-Length: 5 Content-Type: text/plain; charset=utf-8 My Error Message .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The Content property of the HttpResponseMessage doesn’t need to be just plain text, it can also be other formats, for example JSON, XML etc. By using the HttpResponseException we can for example catch an exception and throw a user friendly exception instead: public IEnumerable<string> Get() { try { DoSomething(); return new string[] { "value1", "value2" }; } catch (Exception e) { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.InternalServerError) { Content = new StringContent("An error occurred, please try again or contact the administrator."), ReasonPhrase = "Critical Exception" }); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   Adding a try catch to every ApiController methods will only end in duplication of code, by using a custom ExceptionFilterAttribute or our own custom ApiController base class we can reduce code duplicationof code and also have a more general exception handler for our ApiControllers . By creating a custom ApiController’s and override the ExecuteAsync method, we can add a try catch around the base.ExecuteAsync method, but I prefer to skip the creation of a own custom ApiController, better to use a solution that require few files to be modified. The ExceptionFilterAttribute has a OnException method that we can override and add our exception handling. Here is an example: using System; using System.Diagnostics; using System.Net; using System.Net.Http; using System.Web.Http; using System.Web.Http.Filters; public class ExceptionHandlingAttribute : ExceptionFilterAttribute { public override void OnException(HttpActionExecutedContext context) { if (context.Exception is BusinessException) { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.InternalServerError) { Content = new StringContent(context.Exception.Message), ReasonPhrase = "Exception" }); } //Log Critical errors Debug.WriteLine(context.Exception); throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.InternalServerError) { Content = new StringContent("An error occurred, please try again or contact the administrator."), ReasonPhrase = "Critical Exception" }); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   Note: Something to have in mind is that the ExceptionFilterAttribute will be ignored if the ApiController action method throws a HttpResponseException. The code above will always make sure a HttpResponseExceptions will be returned, it will also make sure the critical exceptions will show a more user friendly message. The OnException method can also be used to log exceptions. By using a ExceptionFilterAttribute the Get() method in the previous example can now look like this: public IEnumerable<string> Get() { DoSomething(); return new string[] { "value1", "value2" }; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } To use the an ExceptionFilterAttribute, we can for example add the ExceptionFilterAttribute to our ApiControllers methods or to the ApiController class definition, or register it globally for all ApiControllers. You can read more about is here. Note: If something goes wrong in the ExceptionFilterAttribute and an exception is thrown that is not of type HttpResponseException, a formatted exception will be thrown with stack trace etc to the client. How about using a custom IHttpActionInvoker? We can create our own IHTTPActionInvoker and add Exception handling to the invoker. The IHttpActionInvoker will be used to invoke the ApiController’s ExecuteAsync method. Here is an example where the default IHttpActionInvoker, ApiControllerActionInvoker, is used to add exception handling: public class MyApiControllerActionInvoker : ApiControllerActionInvoker { public override Task<HttpResponseMessage> InvokeActionAsync(HttpActionContext actionContext, System.Threading.CancellationToken cancellationToken) { var result = base.InvokeActionAsync(actionContext, cancellationToken); if (result.Exception != null && result.Exception.GetBaseException() != null) { var baseException = result.Exception.GetBaseException(); if (baseException is BusinessException) { return Task.Run<HttpResponseMessage>(() => new HttpResponseMessage(HttpStatusCode.InternalServerError) { Content = new StringContent(baseException.Message), ReasonPhrase = "Error" }); } else { //Log critical error Debug.WriteLine(baseException); return Task.Run<HttpResponseMessage>(() => new HttpResponseMessage(HttpStatusCode.InternalServerError) { Content = new StringContent(baseException.Message), ReasonPhrase = "Critical Error" }); } } return result; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } You can register the IHttpActionInvoker with your own IoC to resolve the MyApiContollerActionInvoker, or add it in the Global.asax: GlobalConfiguration.Configuration.Services.Remove(typeof(IHttpActionInvoker), GlobalConfiguration.Configuration.Services.GetActionInvoker()); GlobalConfiguration.Configuration.Services.Add(typeof(IHttpActionInvoker), new MyApiControllerActionInvoker()); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   How about using a Message Handler for Exception Handling? By creating a custom Message Handler, we can handle error after the ApiController and the ExceptionFilterAttribute is invoked and in that way create a global exception handler, BUT, the only thing we can take a look at is the HttpResponseMessage, we can’t add a try catch around the Message Handler’s SendAsync method. The last Message Handler that will be used in the Wep API pipe-line is the HttpControllerDispatcher and this Message Handler is added to the HttpServer in an early stage. The HttpControllerDispatcher will use the IHttpActionInvoker to invoke the ApiController method. The HttpControllerDipatcher has a try catch that will turn ALL exceptions into a HttpResponseMessage, so that is the reason why a try catch around the SendAsync in a custom Message Handler want help us. If we create our own Host for the Wep API we could create our own custom HttpControllerDispatcher and add or exception handler to that class, but that would be little tricky but is possible. We can in a Message Handler take a look at the HttpResponseMessage’s IsSuccessStatusCode property to see if the request has failed and if we throw the HttpResponseException in our ApiControllers, we could use the HttpResponseException and give it a Reason Phrase and use that to identify business exceptions or critical exceptions. I wouldn’t add an exception handler into a Message Handler, instead I should use the ExceptionFilterAttribute and register it globally for all ApiControllers. BUT, now to another interesting issue. What will happen if we have a Message Handler that throws an exception?  Those exceptions will not be catch and handled by the ExceptionFilterAttribute. I found a  bug in my previews blog post about “Log message Request and Response in ASP.NET WebAPI” in the MessageHandler I use to log incoming and outgoing messages. Here is the code from my blog before I fixed the bug:   public abstract class MessageHandler : DelegatingHandler { protected override async Task<HttpResponseMessage> SendAsync(HttpRequestMessage request, CancellationToken cancellationToken) { var corrId = string.Format("{0}{1}", DateTime.Now.Ticks, Thread.CurrentThread.ManagedThreadId); var requestInfo = string.Format("{0} {1}", request.Method, request.RequestUri); var requestMessage = await request.Content.ReadAsByteArrayAsync(); await IncommingMessageAsync(corrId, requestInfo, requestMessage); var response = await base.SendAsync(request, cancellationToken); var responseMessage = await response.Content.ReadAsByteArrayAsync(); await OutgoingMessageAsync(corrId, requestInfo, responseMessage); return response; } protected abstract Task IncommingMessageAsync(string correlationId, string requestInfo, byte[] message); protected abstract Task OutgoingMessageAsync(string correlationId, string requestInfo, byte[] message); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   If a ApiController throws a HttpResponseException, the Content property of the HttpResponseMessage from the SendAsync will be NULL. So a null reference exception is thrown within the MessageHandler. The yellow screen of death will be returned to the client, and the content is HTML and the Http status code is 500. The bug in the MessageHandler was solved by adding a check against the HttpResponseMessage’s IsSuccessStatusCode property: public abstract class MessageHandler : DelegatingHandler { protected override async Task<HttpResponseMessage> SendAsync(HttpRequestMessage request, CancellationToken cancellationToken) { var corrId = string.Format("{0}{1}", DateTime.Now.Ticks, Thread.CurrentThread.ManagedThreadId); var requestInfo = string.Format("{0} {1}", request.Method, request.RequestUri); var requestMessage = await request.Content.ReadAsByteArrayAsync(); await IncommingMessageAsync(corrId, requestInfo, requestMessage); var response = await base.SendAsync(request, cancellationToken); byte[] responseMessage; if (response.IsSuccessStatusCode) responseMessage = await response.Content.ReadAsByteArrayAsync(); else responseMessage = Encoding.UTF8.GetBytes(response.ReasonPhrase); await OutgoingMessageAsync(corrId, requestInfo, responseMessage); return response; } protected abstract Task IncommingMessageAsync(string correlationId, string requestInfo, byte[] message); protected abstract Task OutgoingMessageAsync(string correlationId, string requestInfo, byte[] message); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } If we don’t handle the exceptions that can occur in a custom Message Handler, we can have a hard time to find the problem causing the exception. The savior in this case is the Global.asax’s Application_Error: protected void Application_Error() { var exception = Server.GetLastError(); Debug.WriteLine(exception); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } I would recommend you to add the Application_Error to the Global.asax and log all exceptions to make sure all kind of exception is handled. Summary There are different ways we could add Exception Handling to the Wep API, we can use a custom ApiController, ExceptionFilterAttribute, IHttpActionInvoker or Message Handler. The ExceptionFilterAttribute would be a good place to add a global exception handling, require very few modification, just register it globally for all ApiControllers, even the IHttpActionInvoker can be used to minimize the modifications of files. Adding the Application_Error to the global.asax is a good way to catch all unhandled exception that can occur, for example exception thrown in a Message Handler.   If you want to know when I have posted a blog post, you can follow me on twitter @fredrikn

    Read the article

  • Announcing release of ASP.NET MVC 3, IIS Express, SQL CE 4, Web Farm Framework, Orchard, WebMatrix

    - by ScottGu
    I’m excited to announce the release today of several products: ASP.NET MVC 3 NuGet IIS Express 7.5 SQL Server Compact Edition 4 Web Deploy and Web Farm Framework 2.0 Orchard 1.0 WebMatrix 1.0 The above products are all free. They build upon the .NET 4 and VS 2010 release, and add a ton of additional value to ASP.NET (both Web Forms and MVC) and the Microsoft Web Server stack. ASP.NET MVC 3 Today we are shipping the final release of ASP.NET MVC 3.  You can download and install ASP.NET MVC 3 here.  The ASP.NET MVC 3 source code (released under an OSI-compliant open source license) can also optionally be downloaded here. ASP.NET MVC 3 is a significant update that brings with it a bunch of great features.  Some of the improvements include: Razor ASP.NET MVC 3 ships with a new view-engine option called “Razor” (in addition to continuing to support/enhance the existing .aspx view engine).  Razor minimizes the number of characters and keystrokes required when writing a view template, and enables a fast, fluid coding workflow. Unlike most template syntaxes, with Razor you do not need to interrupt your coding to explicitly denote the start and end of server blocks within your HTML. The Razor parser is smart enough to infer this from your code. This enables a compact and expressive syntax which is clean, fast and fun to type.  You can learn more about Razor from some of the blog posts I’ve done about it over the last 6 months Introducing Razor New @model keyword in Razor Layouts with Razor Server-Side Comments with Razor Razor’s @: and <text> syntax Implicit and Explicit code nuggets with Razor Layouts and Sections with Razor Today’s release supports full code intellisense support for Razor (both VB and C#) with Visual Studio 2010 and the free Visual Web Developer 2010 Express. JavaScript Improvements ASP.NET MVC 3 enables richer JavaScript scenarios and takes advantage of emerging HTML5 capabilities. The AJAX and Validation helpers in ASP.NET MVC 3 now use an Unobtrusive JavaScript based approach.  Unobtrusive JavaScript avoids injecting inline JavaScript into HTML, and enables cleaner separation of behavior using the new HTML 5 “data-“ attribute convention (which conveniently works on older browsers as well – including IE6). This keeps your HTML tight and clean, and makes it easier to optionally swap out or customize JS libraries.  ASP.NET MVC 3 now includes built-in support for posting JSON-based parameters from client-side JavaScript to action methods on the server.  This makes it easier to exchange data across the client and server, and build rich JavaScript front-ends.  We think this capability will be particularly useful going forward with scenarios involving client templates and data binding (including the jQuery plugins the ASP.NET team recently contributed to the jQuery project).  Previous releases of ASP.NET MVC included the core jQuery library.  ASP.NET MVC 3 also now ships the jQuery Validate plugin (which our validation helpers use for client-side validation scenarios).  We are also now shipping and including jQuery UI by default as well (which provides a rich set of client-side JavaScript UI widgets for you to use within projects). Improved Validation ASP.NET MVC 3 includes a bunch of validation enhancements that make it even easier to work with data. Client-side validation is now enabled by default with ASP.NET MVC 3 (using an onbtrusive javascript implementation).  Today’s release also includes built-in support for Remote Validation - which enables you to annotate a model class with a validation attribute that causes ASP.NET MVC to perform a remote validation call to a server method when validating input on the client. The validation features introduced within .NET 4’s System.ComponentModel.DataAnnotations namespace are now supported by ASP.NET MVC 3.  This includes support for the new IValidatableObject interface – which enables you to perform model-level validation, and allows you to provide validation error messages specific to the state of the overall model, or between two properties within the model.  ASP.NET MVC 3 also supports the improvements made to the ValidationAttribute class in .NET 4.  ValidationAttribute now supports a new IsValid overload that provides more information about the current validation context, such as what object is being validated.  This enables richer scenarios where you can validate the current value based on another property of the model.  We’ve shipped a built-in [Compare] validation attribute  with ASP.NET MVC 3 that uses this support and makes it easy out of the box to compare and validate two property values. You can use any data access API or technology with ASP.NET MVC.  This past year, though, we’ve worked closely with the .NET data team to ensure that the new EF Code First library works really well for ASP.NET MVC applications.  These two posts of mine cover the latest EF Code First preview and demonstrates how to use it with ASP.NET MVC 3 to enable easy editing of data (with end to end client+server validation support).  The final release of EF Code First will ship in the next few weeks. Today we are also publishing the first preview of a new MvcScaffolding project.  It enables you to easily scaffold ASP.NET MVC 3 Controllers and Views, and works great with EF Code-First (and is pluggable to support other data providers).  You can learn more about it – and install it via NuGet today - from Steve Sanderson’s MvcScaffolding blog post. Output Caching Previous releases of ASP.NET MVC supported output caching content at a URL or action-method level. With ASP.NET MVC V3 we are also enabling support for partial page output caching – which allows you to easily output cache regions or fragments of a response as opposed to the entire thing.  This ends up being super useful in a lot of scenarios, and enables you to dramatically reduce the work your application does on the server.  The new partial page output caching support in ASP.NET MVC 3 enables you to easily re-use cached sub-regions/fragments of a page across multiple URLs on a site.  It supports the ability to cache the content either on the web-server, or optionally cache it within a distributed cache server like Windows Server AppFabric or memcached. I’ll post some tutorials on my blog that show how to take advantage of ASP.NET MVC 3’s new output caching support for partial page scenarios in the future. Better Dependency Injection ASP.NET MVC 3 provides better support for applying Dependency Injection (DI) and integrating with Dependency Injection/IOC containers. With ASP.NET MVC 3 you no longer need to author custom ControllerFactory classes in order to enable DI with Controllers.  You can instead just register a Dependency Injection framework with ASP.NET MVC 3 and it will resolve dependencies not only for Controllers, but also for Views, Action Filters, Model Binders, Value Providers, Validation Providers, and Model Metadata Providers that you use within your application. This makes it much easier to cleanly integrate dependency injection within your projects. Other Goodies ASP.NET MVC 3 includes dozens of other nice improvements that help to both reduce the amount of code you write, and make the code you do write cleaner.  Here are just a few examples: Improved New Project dialog that makes it easy to start new ASP.NET MVC 3 projects from templates. Improved Add->View Scaffolding support that enables the generation of even cleaner view templates. New ViewBag property that uses .NET 4’s dynamic support to make it easy to pass late-bound data from Controllers to Views. Global Filters support that allows specifying cross-cutting filter attributes (like [HandleError]) across all Controllers within an app. New [AllowHtml] attribute that allows for more granular request validation when binding form posted data to models. Sessionless controller support that allows fine grained control over whether SessionState is enabled on a Controller. New ActionResult types like HttpNotFoundResult and RedirectPermanent for common HTTP scenarios. New Html.Raw() helper to indicate that output should not be HTML encoded. New Crypto helpers for salting and hashing passwords. And much, much more… Learn More about ASP.NET MVC 3 We will be posting lots of tutorials and samples on the http://asp.net/mvc site in the weeks ahead.  Below are two good ASP.NET MVC 3 tutorials available on the site today: Build your First ASP.NET MVC 3 Application: VB and C# Building the ASP.NET MVC 3 Music Store We’ll post additional ASP.NET MVC 3 tutorials and videos on the http://asp.net/mvc site in the future. Visit it regularly to find new tutorials as they are published. How to Upgrade Existing Projects ASP.NET MVC 3 is compatible with ASP.NET MVC 2 – which means it should be easy to update existing MVC projects to ASP.NET MVC 3.  The new features in ASP.NET MVC 3 build on top of the foundational work we’ve already done with the MVC 1 and MVC 2 releases – which means that the skills, knowledge, libraries, and books you’ve acquired are all directly applicable with the MVC 3 release.  MVC 3 adds new features and capabilities – it doesn’t obsolete existing ones. You can upgrade existing ASP.NET MVC 2 projects by following the manual upgrade steps in the release notes.  Alternatively, you can use this automated ASP.NET MVC 3 upgrade tool to easily update your  existing projects. Localized Builds Today’s ASP.NET MVC 3 release is available in English.  We will be releasing localized versions of ASP.NET MVC 3 (in 9 languages) in a few days.  I’ll blog pointers to the localized downloads once they are available. NuGet Today we are also shipping NuGet – a free, open source, package manager that makes it easy for you to find, install, and use open source libraries in your projects. It works with all .NET project types (including ASP.NET Web Forms, ASP.NET MVC, WPF, WinForms, Silverlight, and Class Libraries).  You can download and install it here. NuGet enables developers who maintain open source projects (for example, .NET projects like Moq, NHibernate, Ninject, StructureMap, NUnit, Windsor, Raven, Elmah, etc) to package up their libraries and register them with an online gallery/catalog that is searchable.  The client-side NuGet tools – which include full Visual Studio integration – make it trivial for any .NET developer who wants to use one of these libraries to easily find and install it within the project they are working on. NuGet handles dependency management between libraries (for example: library1 depends on library2). It also makes it easy to update (and optionally remove) libraries from your projects later. It supports updating web.config files (if a package needs configuration settings). It also allows packages to add PowerShell scripts to a project (for example: scaffold commands). Importantly, NuGet is transparent and clean – and does not install anything at the system level. Instead it is focused on making it easy to manage libraries you use with your projects. Our goal with NuGet is to make it as simple as possible to integrate open source libraries within .NET projects.  NuGet Gallery This week we also launched a beta version of the http://nuget.org web-site – which allows anyone to easily search and browse an online gallery of open source packages available via NuGet.  The site also now allows developers to optionally submit new packages that they wish to share with others.  You can learn more about how to create and share a package here. There are hundreds of open-source .NET projects already within the NuGet Gallery today.  We hope to have thousands there in the future. IIS Express 7.5 Today we are also shipping IIS Express 7.5.  IIS Express is a free version of IIS 7.5 that is optimized for developer scenarios.  It works for both ASP.NET Web Forms and ASP.NET MVC project types. We think IIS Express combines the ease of use of the ASP.NET Web Server (aka Cassini) currently built-into Visual Studio today with the full power of IIS.  Specifically: It’s lightweight and easy to install (less than 5Mb download and a quick install) It does not require an administrator account to run/debug applications from Visual Studio It enables a full web-server feature set – including SSL, URL Rewrite, and other IIS 7.x modules It supports and enables the same extensibility model and web.config file settings that IIS 7.x support It can be installed side-by-side with the full IIS web server as well as the ASP.NET Development Server (they do not conflict at all) It works on Windows XP and higher operating systems – giving you a full IIS 7.x developer feature-set on all Windows OS platforms IIS Express (like the ASP.NET Development Server) can be quickly launched to run a site from a directory on disk.  It does not require any registration/configuration steps. This makes it really easy to launch and run for development scenarios.  You can also optionally redistribute IIS Express with your own applications if you want a lightweight web-server.  The standard IIS Express EULA now includes redistributable rights. Visual Studio 2010 SP1 adds support for IIS Express.  Read my VS 2010 SP1 and IIS Express blog post to learn more about what it enables.  SQL Server Compact Edition 4 Today we are also shipping SQL Server Compact Edition 4 (aka SQL CE 4).  SQL CE is a free, embedded, database engine that enables easy database storage. No Database Installation Required SQL CE does not require you to run a setup or install a database server in order to use it.  You can simply copy the SQL CE binaries into the \bin directory of your ASP.NET application, and then your web application can use it as a database engine.  No setup or extra security permissions are required for it to run. You do not need to have an administrator account on the machine. Just copy your web application onto any server and it will work. This is true even of medium-trust applications running in a web hosting environment. SQL CE runs in-memory within your ASP.NET application and will start-up when you first access a SQL CE database, and will automatically shutdown when your application is unloaded.  SQL CE databases are stored as files that live within the \App_Data folder of your ASP.NET Applications. Works with Existing Data APIs SQL CE 4 works with existing .NET-based data APIs, and supports a SQL Server compatible query syntax.  This means you can use existing data APIs like ADO.NET, as well as use higher-level ORMs like Entity Framework and NHibernate with SQL CE.  This enables you to use the same data programming skills and data APIs you know today. Supports Development, Testing and Production Scenarios SQL CE can be used for development scenarios, testing scenarios, and light production usage scenarios.  With the SQL CE 4 release we’ve done the engineering work to ensure that SQL CE won’t crash or deadlock when used in a multi-threaded server scenario (like ASP.NET).  This is a big change from previous releases of SQL CE – which were designed for client-only scenarios and which explicitly blocked running in web-server environments.  Starting with SQL CE 4 you can use it in a web-server as well. There are no license restrictions with SQL CE.  It is also totally free. Tooling Support with VS 2010 SP1 Visual Studio 2010 SP1 adds support for SQL CE 4 and ASP.NET Projects.  Read my VS 2010 SP1 and SQL CE 4 blog post to learn more about what it enables.  Web Deploy and Web Farm Framework 2.0 Today we are also releasing Microsoft Web Deploy V2 and Microsoft Web Farm Framework V2.  These services provide a flexible and powerful way to deploy ASP.NET applications onto either a single server, or across a web farm of machines. You can learn more about these capabilities from my previous blog posts on them: Introducing the Microsoft Web Farm Framework Automating Deployment with Microsoft Web Deploy Visit the http://iis.net website to learn more and install them. Both are free. Orchard 1.0 Today we are also releasing Orchard v1.0.  Orchard is a free, open source, community based project.  It provides Content Management System (CMS) and Blogging System support out of the box, and makes it possible to easily create and manage web-sites without having to write code (site owners can customize a site through the browser-based editing tools built-into Orchard).  Read these tutorials to learn more about how you can setup and manage your own Orchard site. Orchard itself is built as an ASP.NET MVC 3 application using Razor view templates (and by default uses SQL CE 4 for data storage).  Developers wishing to extend an Orchard site with custom functionality can open and edit it as a Visual Studio project – and add new ASP.NET MVC Controllers/Views to it.  WebMatrix 1.0 WebMatrix is a new, free, web development tool from Microsoft that provides a suite of technologies that make it easier to enable website development.  It enables a developer to start a new site by browsing and downloading an app template from an online gallery of web applications (which includes popular apps like Umbraco, DotNetNuke, Orchard, WordPress, Drupal and Joomla).  Alternatively it also enables developers to create and code web sites from scratch. WebMatrix is task focused and helps guide developers as they work on sites.  WebMatrix includes IIS Express, SQL CE 4, and ASP.NET - providing an integrated web-server, database and programming framework combination.  It also includes built-in web publishing support which makes it easy to find and deploy sites to web hosting providers. You can learn more about WebMatrix from my Introducing WebMatrix blog post this summer.  Visit http://microsoft.com/web to download and install it today. Summary I’m really excited about today’s releases – they provide a bunch of additional value that makes web development with ASP.NET, Visual Studio and the Microsoft Web Server a lot better.  A lot of folks worked hard to share this with you today. On behalf of my whole team – we hope you enjoy them! Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

    Read the article

  • 12.04lts: no network internet

    - by dgermann
    Friends-- Cannot connect reliably to ethernet nor at all to Internet: Symptoms: About 2 weeks ago did an upgrade. Have not been able to connect to ethernet nor Internet. Today, for example, boot up this System76 laptop and there was no network connection. Did sudo mount -a and got some internal network connectivity: doug@ubuntu:/sam$ ping earth PING earth (192.168.0.201) 56(84) bytes of data. 64 bytes from earth (192.168.0.201): icmp_req=1 ttl=64 time=0.160 ms 64 bytes from earth (192.168.0.201): icmp_req=2 ttl=64 time=0.177 ms 64 bytes from earth (192.168.0.201): icmp_req=3 ttl=64 time=0.159 ms ^C --- earth ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.159/0.165/0.177/0.013 ms doug@ubuntu:/sam$ ping doug2 PING doug (192.168.0.4) 56(84) bytes of data. ^C --- doug ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 1999ms doug@ubuntu:/sam$ ping sharon PING sharon (192.168.0.111) 56(84) bytes of data. 64 bytes from sharon (192.168.0.111): icmp_req=1 ttl=128 time=0.276 ms ^C --- sharon ping statistics --- 6 packets transmitted, 1 received, 83% packet loss, time 5031ms rtt min/avg/max/mdev = 0.276/0.276/0.276/0.000 ms doug@ubuntu:/sam$ ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. ^C --- 192.168.0.1 ping statistics --- 6 packets transmitted, 0 received, 100% packet loss, time 4999ms doug@ubuntu:/sam$ ping earth PING earth (192.168.0.201) 56(84) bytes of data. ^C --- earth ping statistics --- 5 packets transmitted, 0 received, 100% packet loss, time 4032ms doug@ubuntu:/sam$ ping yahoo.com ping: unknown host yahoo.com doug@ubuntu:/sam$ ping ubuntu.com ping: unknown host ubuntu.com doug@ubuntu:/sam$ ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 14 packets transmitted, 0 received, 100% packet loss, time 13103ms Note that earth is the cifs server, and one time pinging it worked, later failed. Clues: doug@ubuntu:/sam$ grep -i eth /var/log/syslog |tail Aug 23 15:32:46 ubuntu kernel: [ 5328.070401] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 Aug 23 15:32:48 ubuntu kernel: [ 5330.651139] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=19090 PROTO=2 Aug 23 15:34:51 ubuntu kernel: [ 5453.072279] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 Aug 23 15:34:55 ubuntu kernel: [ 5457.085433] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16137 PROTO=2 Aug 23 15:36:56 ubuntu kernel: [ 5578.074492] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 Aug 23 15:37:00 ubuntu kernel: [ 5582.359006] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16150 PROTO=2 Aug 23 15:39:01 ubuntu kernel: [ 5703.074410] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 Aug 23 15:39:03 ubuntu kernel: [ 5705.070122] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16163 PROTO=2 Aug 23 15:41:06 ubuntu kernel: [ 5828.074387] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 Aug 23 15:41:13 ubuntu kernel: [ 5835.319941] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=23298 PROTO=2 doug@ubuntu:/sam$ ifconfig -a eth0 Link encap:Ethernet HWaddr [BLANKED] inet addr:192.168.0.7 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::21b:fcff:fe29:9dfc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3961 errors:0 dropped:0 overruns:0 frame:0 TX packets:2007 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:991204 (991.2 KB) TX bytes:252908 (252.9 KB) Interrupt:16 Base address:0xec00 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2190 errors:0 dropped:0 overruns:0 frame:0 TX packets:2190 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:168052 (168.0 KB) TX bytes:168052 (168.0 KB) wlan0 Link encap:Ethernet HWaddr 00:19:d2:72:5a:0c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) doug@ubuntu:/sam$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off eth0 no wireless extensions. doug@ubuntu:/sam$ lsmod Module Size Used by des_generic 21191 0 md4 12523 0 nls_iso8859_1 12617 1 nls_cp437 12751 1 vfat 17308 1 fat 55605 1 vfat usb_storage 39646 1 dm_crypt 22528 1 joydev 17393 0 snd_hda_codec_analog 75395 1 snd_hda_intel 32719 2 pcmcia 39826 0 snd_hda_codec 109562 2 snd_hda_codec_analog,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec ip6t_LOG 16846 4 xt_hl 12465 6 ip6t_rt 12473 3 snd_pcm 80916 2 snd_hda_intel,snd_hda_codec nf_conntrack_ipv6 13581 7 nf_defrag_ipv6 13175 1 nf_conntrack_ipv6 ipt_REJECT 12512 1 ipt_LOG 12783 5 xt_limit 12541 12 xt_tcpudp 12531 21 xt_addrtype 12596 4 snd_seq_midi 13132 0 xt_state 12514 14 ip6table_filter 12711 1 ip6_tables 22528 3 ip6t_LOG,ip6t_rt,ip6table_filter nf_conntrack_netbios_ns 12585 0 nf_conntrack_broadcast 12541 1 nf_conntrack_netbios_ns nf_nat_ftp 12595 0 nf_nat 24959 1 nf_nat_ftp nf_conntrack_ipv4 19084 9 nf_nat nf_defrag_ipv4 12649 1 nf_conntrack_ipv4 nf_conntrack_ftp 13183 1 nf_nat_ftp nf_conntrack 73847 8 nf_conntrack_ipv6,xt_state,nf_conntrack_netbios_ns,nf_conntrack_broadcast,nf_nat_ftp,nf_nat,nf_conntrack_ipv4,nf_conntrack_ftp iptable_filter 12706 1 ip_tables 18106 1 iptable_filter snd_rawmidi 25424 1 snd_seq_midi psmouse 86982 0 x_tables 22011 13 ip6t_LOG,xt_hl,ip6t_rt,ipt_REJECT,ipt_LOG,xt_limit,xt_tcpudp,xt_addrtype,xt_state,ip6table_filter,ip6_tables,iptable_filter,ip_tables arc4 12473 2 r592 17808 0 snd_seq_midi_event 14475 1 snd_seq_midi memstick 15857 1 r592 yenta_socket 27465 0 serio_raw 13027 0 pcmcia_rsrc 18367 1 yenta_socket iwl3945 73186 0 pcmcia_core 21511 3 pcmcia,yenta_socket,pcmcia_rsrc iwl_legacy 71334 1 iwl3945 snd_seq 51592 2 snd_seq_midi,snd_seq_midi_event mac80211 436493 2 iwl3945,iwl_legacy snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq rfcomm 38139 0 bnep 17830 2 parport_pc 32114 0 bluetooth 158447 10 rfcomm,bnep ppdev 12849 0 cfg80211 178877 3 iwl3945,iwl_legacy,mac80211 asus_laptop 23693 0 sparse_keymap 13658 1 asus_laptop input_polldev 13648 1 asus_laptop nls_utf8 12493 6 cifs 258037 10 snd 62218 13 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd mac_hid 13077 0 snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp i915 428418 3 firewire_ohci 40172 0 sdhci_pci 18324 0 sdhci 28241 1 sdhci_pci firewire_core 56940 1 firewire_ohci crc_itu_t 12627 1 firewire_core r8169 56396 0 drm_kms_helper 45466 1 i915 drm 197641 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19115 1 i915 doug@ubuntu:/sam$ dmesg |grep eth [ 0.116936] i2c-core: driver [aat2870] using legacy suspend method [ 0.116939] i2c-core: driver [aat2870] using legacy resume method [ 1.453811] r8169 0000:03:07.0: eth0: RTL8169sb/8110sb at 0xf840ec00, [BLANKED], XID 10000000 IRQ 16 [ 1.453815] r8169 0000:03:07.0: eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok] [ 25.681231] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 154.037318] r8169 0000:03:07.0: eth0: link down [ 154.037329] r8169 0000:03:07.0: eth0: link down [ 154.037596] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 155.583162] r8169 0000:03:07.0: eth0: link up [ 155.583366] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 156.637048] r8169 0000:03:07.0: eth0: link down [ 156.637066] r8169 0000:03:07.0: eth0: link down [ 156.637339] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 156.773699] r8169 0000:03:07.0: eth0: link down [ 156.773983] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 158.456181] r8169 0000:03:07.0: eth0: link up [ 158.456378] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 159.364468] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 162.384496] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=38877 PROTO=2 [ 166.272457] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 166.422333] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=40695 PROTO=2 [ 168.736049] eth0: no IPv6 routers present [ 183.572472] r8169 0000:03:07.0: eth0: link down [ 183.572490] r8169 0000:03:07.0: eth0: link down [ 183.572934] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 185.204801] r8169 0000:03:07.0: eth0: link up [ 185.205005] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 3620.680451] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 3621.068431] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 3624.912973] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9118 PROTO=2 [ 3631.088069] eth0: no IPv6 routers present [ 3703.062980] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 3703.465330] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9210 PROTO=2 [ 3828.062951] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 3833.617772] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9749 PROTO=2 [ 3953.062920] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 3955.675129] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=15983 PROTO=2 [ 4078.062922] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4078.386319] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=15997 PROTO=2 [ 4203.062899] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4203.559241] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16011 PROTO=2 [ 4328.062833] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4328.930922] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16027 PROTO=2 [ 4453.062811] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4453.950224] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16039 PROTO=2 [ 4578.062742] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4580.626432] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=13738 PROTO=2 [ 4703.062704] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4706.310170] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=15942 PROTO=2 [ 4828.062707] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4832.174324] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16505 PROTO=2 [ 4953.062628] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4961.469282] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16090 PROTO=2 [ 5078.062552] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5080.776462] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=17239 PROTO=2 [ 5203.070394] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5205.358134] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=17665 PROTO=2 [ 5328.070401] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5330.651139] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=19090 PROTO=2 [ 5453.072279] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5457.085433] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16137 PROTO=2 [ 5578.074492] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5582.359006] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16150 PROTO=2 [ 5703.074410] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5705.070122] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16163 PROTO=2 [ 5828.074387] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED][BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5835.319941] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED][BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=23298 PROTO=2 [ 5953.074429] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED][BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5961.925481] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED][BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=24261 PROTO=2 doug@ubuntu:/sam$ lspci -nnk |grep -iA2 eth 03:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller [10ec:8169] (rev 10) Subsystem: ASUSTeK Computer Inc. Device [1043:11e5] Kernel driver in use: r8169 doug@ubuntu:/sam$ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 doug@ubuntu:/sam$ nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Ifupdown (eth0)] ---------------------------------------------- Type: Wired Driver: r8169 State: connected Default: yes HW Address: [BLANKED] Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.0.7 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: iwl3945 State: disconnected Default: no HW Address: 00:19:D2:72:5A:0C Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points ATT592: Infra, 30:60:23:76:FE:60, Freq 2437 MHz, Rate 54 Mb/s, Strength 24 WPA WPA2 doug@ubuntu:/sam$ nslookup ubuntu.com ;; connection timed out; no servers could be reached doug@ubuntu:/sam$ dig ubuntuforums.org ; <<>> DiG 9.8.1-P1 <<>> ubuntuforums.org ;; global options: +cmd ;; connection timed out; no servers could be reached doug@ubuntu:/sam$ sudo ifconfig eth0 up doug@ubuntu:/sam$ dhcpcd eth0 The program 'dhcpcd' can be found in the following packages: * dhcpcd * dhcpcd5 Try: sudo apt-get install <selected package> doug@ubuntu:/sam$ lspci -k 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: ASUSTeK Computer Inc. Device 1252 Kernel driver in use: i915 Kernel modules: intelfb, i915 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: ASUSTeK Computer Inc. Device 1252 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: uhci_hcd 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: uhci_hcd 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: uhci_hcd 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: uhci_hcd 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel modules: leds-ss4200, iTCO_wdt, intel-rng 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: ata_piix 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel modules: i2c-i801 02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) Subsystem: Intel Corporation PRO/Wireless 3945ABG Network Connection Kernel driver in use: iwl3945 Kernel modules: iwl3945 03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 03:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: r592 Kernel modules: r592 03:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller (rev 10) Subsystem: ASUSTeK Computer Inc. Device 11e5 Kernel driver in use: r8169 Kernel modules: r8169 doug@ubuntu:/sam$ Things I have tried: sudo start network-manager: no help gksudo gedit /etc/network/interfaces changed line to iface eth0 inet dhcp: no help gksudo gedit /etc/NetworkManager/NetworkManager.conf, I changed managed=false to managed=true. Then sudo service network-manager restart: no help: network is unreachable sudo pkill -9 NetworkManager: no help gksudo gedit /etc/resolve.conf added line nameseriver 8.8.8.8: no help I know very little about networking; to date this has simply worked. Thanks for your help! :- Doug.

    Read the article

  • Developing web apps using ASP.NET MVC 3, Razor and EF Code First - Part 1

    - by shiju
    In this post, I will demonstrate web application development using ASP. NET MVC 3, Razor and EF code First. This post will also cover Dependency Injection using Unity 2.0 and generic Repository and Unit of Work for EF Code First. The following frameworks will be used for this step by step tutorial. ASP.NET MVC 3 EF Code First CTP 5 Unity 2.0 Define Domain Model Let’s create domain model for our simple web application Category class public class Category {     public int CategoryId { get; set; }     [Required(ErrorMessage = "Name Required")]     [StringLength(25, ErrorMessage = "Must be less than 25 characters")]     public string Name { get; set;}     public string Description { get; set; }     public virtual ICollection<Expense> Expenses { get; set; } }   Expense class public class Expense {             public int ExpenseId { get; set; }            public string  Transaction { get; set; }     public DateTime Date { get; set; }     public double Amount { get; set; }     public int CategoryId { get; set; }     public virtual Category Category { get; set; } } We have two domain entities - Category and Expense. A single category contains a list of expense transactions and every expense transaction should have a Category. In this post, we will be focusing on CRUD operations for the entity Category and will be working on the Expense entity with a View Model object in the later post. And the source code for this application will be refactored over time. The above entities are very simple POCO (Plain Old CLR Object) classes and the entity Category is decorated with validation attributes in the System.ComponentModel.DataAnnotations namespace. Now we want to use these entities for defining model objects for the Entity Framework 4. Using the Code First approach of Entity Framework, we can first define the entities by simply writing POCO classes without any coupling with any API or database library. This approach lets you focus on domain model which will enable Domain-Driven Development for applications. EF code first support is currently enabled with a separate API that is runs on top of the Entity Framework 4. EF Code First is reached CTP 5 when I am writing this article. Creating Context Class for Entity Framework We have created our domain model and let’s create a class in order to working with Entity Framework Code First. For this, you have to download EF Code First CTP 5 and add reference to the assembly EntitFramework.dll. You can also use NuGet to download add reference to EEF Code First.    public class MyFinanceContext : DbContext {     public MyFinanceContext() : base("MyFinance") { }     public DbSet<Category> Categories { get; set; }     public DbSet<Expense> Expenses { get; set; }         }   The above class MyFinanceContext is derived from DbContext that can connect your model classes to a database. The MyFinanceContext class is mapping our Category and Expense class into database tables Categories and Expenses using DbSet<TEntity> where TEntity is any POCO class. When we are running the application at first time, it will automatically create the database. EF code-first look for a connection string in web.config or app.config that has the same name as the dbcontext class. If it is not find any connection string with the convention, it will automatically create database in local SQL Express database by default and the name of the database will be same name as the dbcontext class. You can also define the name of database in constructor of the the dbcontext class. Unlike NHibernate, we don’t have to use any XML based mapping files or Fluent interface for mapping between our model and database. The model classes of Code First are working on the basis of conventions and we can also use a fluent API to refine our model. The convention for primary key is ‘Id’ or ‘<class name>Id’.  If primary key properties are detected with type ‘int’, ‘long’ or ‘short’, they will automatically registered as identity columns in the database by default. Primary key detection is not case sensitive. We can define our model classes with validation attributes in the System.ComponentModel.DataAnnotations namespace and it automatically enforces validation rules when a model object is updated or saved. Generic Repository for EF Code First We have created model classes and dbcontext class. Now we have to create generic repository pattern for data persistence with EF code first. If you don’t know about the repository pattern, checkout Martin Fowler’s article on Repository Let’s create a generic repository to working with DbContext and DbSet generics. public interface IRepository<T> where T : class     {         void Add(T entity);         void Delete(T entity);         T GetById(long Id);         IEnumerable<T> All();     }   RepositoryBasse – Generic Repository class public abstract class RepositoryBase<T> where T : class { private MyFinanceContext database; private readonly IDbSet<T> dbset; protected RepositoryBase(IDatabaseFactory databaseFactory) {     DatabaseFactory = databaseFactory;     dbset = Database.Set<T>(); }   protected IDatabaseFactory DatabaseFactory {     get; private set; }   protected MyFinanceContext Database {     get { return database ?? (database = DatabaseFactory.Get()); } } public virtual void Add(T entity) {     dbset.Add(entity);            }        public virtual void Delete(T entity) {     dbset.Remove(entity); }   public virtual T GetById(long id) {     return dbset.Find(id); }   public virtual IEnumerable<T> All() {     return dbset.ToList(); } }   DatabaseFactory class public class DatabaseFactory : Disposable, IDatabaseFactory {     private MyFinanceContext database;     public MyFinanceContext Get()     {         return database ?? (database = new MyFinanceContext());     }     protected override void DisposeCore()     {         if (database != null)             database.Dispose();     } } Unit of Work If you are new to Unit of Work pattern, checkout Fowler’s article on Unit of Work . According to Martin Fowler, the Unit of Work pattern "maintains a list of objects affected by a business transaction and coordinates the writing out of changes and the resolution of concurrency problems." Let’s create a class for handling Unit of Work   public interface IUnitOfWork {     void Commit(); }   UniOfWork class public class UnitOfWork : IUnitOfWork {     private readonly IDatabaseFactory databaseFactory;     private MyFinanceContext dataContext;       public UnitOfWork(IDatabaseFactory databaseFactory)     {         this.databaseFactory = databaseFactory;     }       protected MyFinanceContext DataContext     {         get { return dataContext ?? (dataContext = databaseFactory.Get()); }     }       public void Commit()     {         DataContext.Commit();     } }   The Commit method of the UnitOfWork will call the commit method of MyFinanceContext class and it will execute the SaveChanges method of DbContext class.   Repository class for Category In this post, we will be focusing on the persistence against Category entity and will working on other entities in later post. Let’s create a repository for handling CRUD operations for Category using derive from a generic Repository RepositoryBase<T>.   public class CategoryRepository: RepositoryBase<Category>, ICategoryRepository     {     public CategoryRepository(IDatabaseFactory databaseFactory)         : base(databaseFactory)         {         }                } public interface ICategoryRepository : IRepository<Category> { } If we need additional methods than generic repository for the Category, we can define in the CategoryRepository. Dependency Injection using Unity 2.0 If you are new to Inversion of Control/ Dependency Injection or Unity, please have a look on my articles at http://weblogs.asp.net/shijuvarghese/archive/tags/IoC/default.aspx. I want to create a custom lifetime manager for Unity to store container in the current HttpContext.   public class HttpContextLifetimeManager<T> : LifetimeManager, IDisposable {     public override object GetValue()     {         return HttpContext.Current.Items[typeof(T).AssemblyQualifiedName];     }     public override void RemoveValue()     {         HttpContext.Current.Items.Remove(typeof(T).AssemblyQualifiedName);     }     public override void SetValue(object newValue)     {         HttpContext.Current.Items[typeof(T).AssemblyQualifiedName] = newValue;     }     public void Dispose()     {         RemoveValue();     } }   Let’s create controller factory for Unity in the ASP.NET MVC 3 application. public class UnityControllerFactory : DefaultControllerFactory { IUnityContainer container; public UnityControllerFactory(IUnityContainer container) {     this.container = container; } protected override IController GetControllerInstance(RequestContext reqContext, Type controllerType) {     IController controller;     if (controllerType == null)         throw new HttpException(                 404, String.Format(                     "The controller for path '{0}' could not be found" +     "or it does not implement IController.",                 reqContext.HttpContext.Request.Path));       if (!typeof(IController).IsAssignableFrom(controllerType))         throw new ArgumentException(                 string.Format(                     "Type requested is not a controller: {0}",                     controllerType.Name),                     "controllerType");     try     {         controller= container.Resolve(controllerType) as IController;     }     catch (Exception ex)     {         throw new InvalidOperationException(String.Format(                                 "Error resolving controller {0}",                                 controllerType.Name), ex);     }     return controller; }   }   Configure contract and concrete types in Unity Let’s configure our contract and concrete types in Unity for resolving our dependencies.   private void ConfigureUnity() {     //Create UnityContainer               IUnityContainer container = new UnityContainer()                 .RegisterType<IDatabaseFactory, DatabaseFactory>(new HttpContextLifetimeManager<IDatabaseFactory>())     .RegisterType<IUnitOfWork, UnitOfWork>(new HttpContextLifetimeManager<IUnitOfWork>())     .RegisterType<ICategoryRepository, CategoryRepository>(new HttpContextLifetimeManager<ICategoryRepository>());                 //Set container for Controller Factory                ControllerBuilder.Current.SetControllerFactory(             new UnityControllerFactory(container)); }   In the above ConfigureUnity method, we are registering our types onto Unity container with custom lifetime manager HttpContextLifetimeManager. Let’s call ConfigureUnity method in the Global.asax.cs for set controller factory for Unity and configuring the types with Unity.   protected void Application_Start() {     AreaRegistration.RegisterAllAreas();     RegisterGlobalFilters(GlobalFilters.Filters);     RegisterRoutes(RouteTable.Routes);     ConfigureUnity(); }   Developing web application using ASP.NET MVC 3 We have created our domain model for our web application and also have created repositories and configured dependencies with Unity container. Now we have to create controller classes and views for doing CRUD operations against the Category entity. Let’s create controller class for Category Category Controller   public class CategoryController : Controller {     private readonly ICategoryRepository categoryRepository;     private readonly IUnitOfWork unitOfWork;           public CategoryController(ICategoryRepository categoryRepository, IUnitOfWork unitOfWork)     {         this.categoryRepository = categoryRepository;         this.unitOfWork = unitOfWork;     }       public ActionResult Index()     {         var categories = categoryRepository.All();         return View(categories);     }     [HttpGet]     public ActionResult Edit(int id)     {         var category = categoryRepository.GetById(id);         return View(category);     }       [HttpPost]     public ActionResult Edit(int id, FormCollection collection)     {         var category = categoryRepository.GetById(id);         if (TryUpdateModel(category))         {             unitOfWork.Commit();             return RedirectToAction("Index");         }         else return View(category);                 }       [HttpGet]     public ActionResult Create()     {         var category = new Category();         return View(category);     }           [HttpPost]     public ActionResult Create(Category category)     {         if (!ModelState.IsValid)         {             return View("Create", category);         }                     categoryRepository.Add(category);         unitOfWork.Commit();         return RedirectToAction("Index");     }       [HttpPost]     public ActionResult Delete(int  id)     {         var category = categoryRepository.GetById(id);         categoryRepository.Delete(category);         unitOfWork.Commit();         var categories = categoryRepository.All();         return PartialView("CategoryList", categories);       }        }   Creating Views in Razor Now we are going to create views in Razor for our ASP.NET MVC 3 application.  Let’s create a partial view CategoryList.cshtml for listing category information and providing link for Edit and Delete operations. CategoryList.cshtml @using MyFinance.Helpers; @using MyFinance.Domain; @model IEnumerable<Category>      <table>         <tr>         <th>Actions</th>         <th>Name</th>          <th>Description</th>         </tr>     @foreach (var item in Model) {             <tr>             <td>                 @Html.ActionLink("Edit", "Edit",new { id = item.CategoryId })                 @Ajax.ActionLink("Delete", "Delete", new { id = item.CategoryId }, new AjaxOptions { Confirm = "Delete Expense?", HttpMethod = "Post", UpdateTargetId = "divCategoryList" })                           </td>             <td>                 @item.Name             </td>             <td>                 @item.Description             </td>         </tr>          }       </table>     <p>         @Html.ActionLink("Create New", "Create")     </p> The delete link is providing Ajax functionality using the Ajax.ActionLink. This will call an Ajax request for Delete action method in the CategoryCotroller class. In the Delete action method, it will return Partial View CategoryList after deleting the record. We are using CategoryList view for the Ajax functionality and also for Index view using for displaying list of category information. Let’s create Index view using partial view CategoryList  Index.chtml @model IEnumerable<MyFinance.Domain.Category> @{     ViewBag.Title = "Index"; }    <h2>Category List</h2>    <script src="@Url.Content("~/Scripts/jquery.unobtrusive-ajax.min.js")" type="text/javascript"></script>    <div id="divCategoryList">               @Html.Partial("CategoryList", Model) </div>   We can call the partial views using Html.Partial helper method. Now we are going to create View pages for insert and update functionality for the Category. Both view pages are sharing common user interface for entering the category information. So I want to create an EditorTemplate for the Category information. We have to create the EditorTemplate with the same name of entity object so that we can refer it on view pages using @Html.EditorFor(model => model) . So let’s create template with name Category. Let’s create view page for insert Category information   @model MyFinance.Domain.Category   @{     ViewBag.Title = "Save"; }   <h2>Create</h2>   <script src="@Url.Content("~/Scripts/jquery.validate.min.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery.validate.unobtrusive.min.js")" type="text/javascript"></script>   @using (Html.BeginForm()) {     @Html.ValidationSummary(true)     <fieldset>         <legend>Category</legend>                @Html.EditorFor(model => model)               <p>             <input type="submit" value="Create" />         </p>     </fieldset> }   <div>     @Html.ActionLink("Back to List", "Index") </div> ViewStart file In Razor views, we can add a file named _viewstart.cshtml in the views directory  and this will be shared among the all views with in the Views directory. The below code in the _viewstart.cshtml, sets the Layout page for every Views in the Views folder.      @{     Layout = "~/Views/Shared/_Layout.cshtml"; }   Source Code You can download the source code from http://efmvc.codeplex.com/ . The source will be refactored on over time.   Summary In this post, we have created a simple web application using ASP.NET MVC 3 and EF Code First. We have discussed on technologies and practices such as ASP.NET MVC 3, Razor, EF Code First, Unity 2, generic Repository and Unit of Work. In my later posts, I will modify the application and will be discussed on more things. Stay tuned to my blog  for more posts on step by step application building.

    Read the article

  • Ubuntu missing from the Grub menu

    - by varevarao
    Recently I've had some audio issues with Ubuntu (using precise), and in the process of trying to resolve that I ran a dist-upgrade. Everything went just fine, and the sound seemed good, until I rebooted my machine for the first time since the dist-upgrade. All I see now in the Grub menu at startup is memtest86+, another memtest variant, and Windows 7. It's not showing any of the linux kernels that Ubuntu is running on. I am attaching my bootinfoscript: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. sda1: __________________________________________________________________________ File system: vfat Boot sector type: Dell Utility: FAT16 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: sda4: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 2048. Operating System: Boot files: sda6: __________________________________________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99-2.00) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda6 and looks at sector 220046240 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda7: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 63 273,104 273,042 de Dell Utility /dev/sda2 * 274,432 19,406,847 19,132,416 7 NTFS / exFAT / HPFS /dev/sda3 19,406,848 218,274,364 198,867,517 7 NTFS / exFAT / HPFS /dev/sda4 218,275,838 625,139,711 406,863,874 f W95 Extended (LBA) /dev/sda5 328,630,272 625,139,711 296,509,440 7 NTFS / exFAT / HPFS /dev/sda6 218,275,840 324,030,463 105,754,624 83 Linux /dev/sda7 324,032,512 328,626,175 4,593,664 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 07DA-0512 vfat DellUtility /dev/sda2 8834146034145392 ntfs RECOVERY /dev/sda3 48E2189DE21890F4 ntfs OS /dev/sda5 BC2A44C02A447982 ntfs Varshneya /dev/sda6 34731459-4b0f-46ac-a9bf-cb360a2c947c ext4 /dev/sda7 dcb9ce9b-799a-4c65-b008-887b01775670 swap /dev/sr0 iso9660 Ubuntu 12.04.1 LTS i386 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sda6 /mnt ext4 (rw) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda6/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c if loadfont /boot/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 8834146034145392 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda6/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=34731459-4b0f-46ac-a9bf-cb360a2c947c / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda7 during installation UUID=dcb9ce9b-799a-4c65-b008-887b01775670 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda6: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 104.851909637 = 112.583880704 boot/grub/core.img 1 121.191410065 = 130.128285696 boot/grub/grub.cfg 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda4 00000000 eb 0f 2a 5d f4 b7 75 f2 e9 56 12 b8 50 b4 79 ec |..*]..u..V..P.y.| 00000010 89 91 ca c3 16 40 31 d0 ae c4 53 3d c7 dd d7 98 |[email protected]=....| 00000020 bd a4 f2 a4 e8 ab fc ea 36 30 1b 34 cf 8a 28 30 |........60.4..(0| 00000030 43 95 6c 31 3e 76 93 58 84 37 99 c3 ae 3a 88 a3 |C.l1>v.X.7...:..| 00000040 c2 a6 36 2a f8 e0 e1 03 91 8d a1 50 cd ad b0 b5 |..6*.......P....| 00000050 ad 69 3a 49 63 1f 4a 33 97 6e 0c 71 bf 7d bd 35 |.i:Ic.J3.n.q.}.5| 00000060 86 c5 17 93 b4 9f e5 af e0 c4 6f f4 6f f9 4b dd |..........o.o.K.| 00000070 14 39 e2 9e b9 36 ca b1 56 5b d9 b1 66 2c 05 b2 |.9...6..V[..f,..| 00000080 5d 5b 99 c0 db e6 81 27 ab c2 e1 55 00 ac 0b 2c |][.....'...U...,| 00000090 24 d3 8e 54 b0 3d ab 58 e4 23 fc 3a 79 93 fb 5e |$..T.=.X.#.:y..^| 000000a0 94 5a 3a c2 16 4e 56 cb 1b 7f 7e b3 4c 38 ca 5b |.Z:..NV...~.L8.[| 000000b0 ca ab c1 2c 2a 64 e7 77 fe 2a ba ee 08 33 b5 9b |...,*d.w.*...3..| 000000c0 d0 c2 b4 a8 fc 73 4f 01 fd 03 61 75 eb 6d 1a 74 |.....sO...au.m.t| 000000d0 5f 79 31 7f ed e6 f5 99 21 36 16 ed 25 d9 6d 2b |_y1.....!6..%.m+| 000000e0 5f f4 42 b8 9d 01 89 10 fe df a4 98 e7 ab ab ea |_.B.............| 000000f0 1d 1c 44 e1 49 d9 19 c9 ab f5 41 eb 4a 32 c2 39 |..D.I.....A.J2.9| 00000100 87 57 f6 f6 f3 b5 4d 17 72 f2 b1 16 19 aa ec 24 |.W....M.r......$| 00000110 39 bd e3 b1 68 b3 b0 7f fa 2a 3a 2e 99 ed db 8a |9...h....*:.....| 00000120 f8 61 b4 ef 9d 7d 85 95 ed ad eb 9e 71 f4 27 d3 |.a...}......q.'.| 00000130 f3 04 8b 8a 69 98 02 72 df e1 f9 83 27 5b 01 4c |....i..r....'[.L| 00000140 d4 9a b9 3b db ca 1e 40 35 db 6f c1 52 c0 7f 27 |...;[email protected]..'| 00000150 8a 1d bc 34 89 24 b6 e3 fd ec a1 2a e5 9e d1 8f |...4.$.....*....| 00000160 77 e0 d5 52 c0 4c c4 38 38 3c 28 19 bf 20 f0 03 |w..R.L.88<(.. ..| 00000170 38 a4 b1 b5 ed 6a b8 f7 a9 7b 65 b1 7b 64 4a 33 |8....j...{e.{dJ3| 00000180 66 1a 60 29 38 1d 5b 52 40 31 de a5 0c 0f cc 6f |f.`)8.[[email protected]| 00000190 dd 31 6d 3d f0 2a 32 85 67 66 ca 4f 02 aa 0d 30 |.1m=.*2.gf.O...0| 000001a0 66 c9 b2 33 c2 4b 8a fa 3c 7b 52 02 00 88 8e cf |f..3.K..<{R.....| 000001b0 67 1e d4 20 49 1d 1a b8 71 ad c2 d4 37 9d 00 fe |g.. I...q...7...| 000001c0 ff ff 07 fe ff ff 02 e0 93 06 00 60 ac 11 00 fe |...........`....| 000001d0 ff ff 05 fe ff ff 01 00 00 00 01 b0 4d 06 00 00 |............M...| 000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 ADDITIONAL INFORMATION : =================== log of boot-repair 2012-11-24__09h45 =================== boot-repair version : 3.195~ppa2~precise boot-sav version : 3.195~ppa2~precise glade2script version : 3.2.2~ppa45~precise boot-sav-extra version : 3.195~ppa2~precise boot-repair is executed in live-session (Ubuntu 12.04.1 LTS, precise, Ubuntu, i686) CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- =================== os-prober: /dev/sda2:Windows 7 (loader):Windows:chain /dev/sda6:Ubuntu 12.04.1 LTS (12.04):Ubuntu:linux =================== blkid: /dev/sda1: SEC_TYPE="msdos" LABEL="DellUtility" UUID="07DA-0512" TYPE="vfat" /dev/sda2: LABEL="RECOVERY" UUID="8834146034145392" TYPE="ntfs" /dev/sda3: LABEL="OS" UUID="48E2189DE21890F4" TYPE="ntfs" /dev/sda5: LABEL="Varshneya" UUID="BC2A44C02A447982" TYPE="ntfs" /dev/loop0: TYPE="squashfs" /dev/sda6: UUID="34731459-4b0f-46ac-a9bf-cb360a2c947c" TYPE="ext4" /dev/sda7: UUID="dcb9ce9b-799a-4c65-b008-887b01775670" TYPE="swap" /dev/sr0: LABEL="Ubuntu 12.04.1 LTS i386" TYPE="iso9660" 1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS. Windows not detected by os-prober on sda3. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== /mnt/etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== /mnt/etc/grub.d/ : drwxr-xr-x 2 root root 4096 Nov 22 16:15 grub.d total 56 -rwxr-xr-x 1 root root 6743 Sep 12 20:19 00_header -rwxr-xr-x 1 root root 5522 Sep 12 20:05 05_debian_theme -rwxr-xr-x 1 root root 7407 Sep 12 20:19 10_linux -rwxr-xr-x 1 root root 6335 Sep 12 20:19 20_linux_xen -rwxr-xr-x 1 root root 1588 Sep 24 2010 20_memtest86+ -rwxr-xr-x 1 root root 7603 Sep 12 20:19 30_os-prober -rwxr-xr-x 1 root root 214 Sep 12 20:19 40_custom -rwxr-xr-x 1 root root 95 Sep 12 20:19 41_custom -rw-r--r-- 1 root root 483 Sep 12 20:19 README =================== No kernel in /mnt/boot: grub memtest86+.bin memtest86+_multiboot.bin =================== UEFI/Legacy mode: This live-session is not EFI-compatible. SecureBoot maybe enabled. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1. sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2. sda3 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda3. sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5. sda6 : sda, not-sepboot, grubenv-ok grub2, grub-pc, update-grub, 64, no-kernel, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 63 sectors * 512 bytes =================== parted -l: Model: ATA ST9320423AS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 140MB 140MB primary fat16 diag 2 141MB 9936MB 9796MB primary ntfs boot 3 9936MB 112GB 102GB primary ntfs 4 112GB 320GB 208GB extended lba 6 112GB 166GB 54.1GB logical ext4 7 166GB 168GB 2352MB logical linux-swap(v1) 5 168GB 320GB 152GB logical ntfs Model: HL-DT-ST DVD+-RW GA31N (scsi) Disk /dev/sr0: 4700MB Sector size (logical/physical): 2048B/2048B Partition Table: msdos Number Start End Size Type File system Flags 1 131kB 2916MB 2916MB primary boot, hidden =================== parted -lm: BYT; /dev/sda:320GB:scsi:512:512:msdos:ATA ST9320423AS; 1:32.3kB:140MB:140MB:fat16::diag; 2:141MB:9936MB:9796MB:ntfs::boot; 3:9936MB:112GB:102GB:ntfs::; 4:112GB:320GB:208GB:::lba; 6:112GB:166GB:54.1GB:ext4::; 7:166GB:168GB:2352MB:linux-swap(v1)::; 5:168GB:320GB:152GB:ntfs::; BYT; /dev/sr0:4700MB:scsi:2048:2048:msdos:HL-DT-ST DVD+-RW GA31N; 1:131kB:2916MB:2916MB:::boot, hidden; =================== mount: /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) /dev/sda6 on /mnt type ext4 (rw) /dev on /mnt/dev type none (rw,bind) /proc on /mnt/proc type none (rw,bind) /sys on /mnt/sys type none (rw,bind) /usr on /mnt/usr type none (rw,bind) /dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw) /dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usbmon0 usbmon1 usbmon2 v4l vga_arbiter video0 zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /cow overlayfs 1.9G 113M 1.8G 6% / udev devtmpfs 1.9G 12K 1.9G 1% /dev tmpfs tmpfs 777M 872K 776M 1% /run /dev/sr0 iso9660 696M 696M 0 100% /cdrom /dev/loop0 squashfs 667M 667M 0 100% /rofs tmpfs tmpfs 1.9G 20K 1.9G 1% /tmp none tmpfs 5.0M 0 5.0M 0% /run/lock none tmpfs 1.9G 176K 1.9G 1% /run/shm /dev/sda6 ext4 51G 27G 22G 56% /mnt /dev/sda1 vfat 134M 9.1M 125M 7% /mnt/boot-sav/sda1 /dev/sda2 fuseblk 9.2G 5.6G 3.6G 61% /mnt/boot-sav/sda2 /dev/sda3 fuseblk 95G 80G 16G 84% /mnt/boot-sav/sda3 /dev/sda5 fuseblk 142G 130G 12G 92% /mnt/boot-sav/sda5 =================== fdisk -l: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb8000000 Device Boot Start End Blocks Id System /dev/sda1 63 273104 136521 de Dell Utility /dev/sda2 * 274432 19406847 9566208 7 HPFS/NTFS/exFAT /dev/sda3 19406848 218274364 99433758+ 7 HPFS/NTFS/exFAT /dev/sda4 218275838 625139711 203431937 f W95 Ext'd (LBA) /dev/sda5 328630272 625139711 148254720 7 HPFS/NTFS/exFAT /dev/sda6 218275840 324030463 52877312 83 Linux /dev/sda7 324032512 328626175 2296832 82 Linux swap / Solaris Partition table entries are not in disk order =================== Repair blockers 64bits detected. Please use this software in a 64bits session. (Please use Ubuntu-Secure-Remix-64bits (www.sourceforge.net/p/ubuntu-secured) which contains a 64bits-compatible version of this software.) This will enable this feature. =================== Final advice in case of recommended repair The boot files of [Ubuntu 12.04.1 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) =================== Default settings Recommended-Repair This setting would reinstall the grub2 of sda6 into the MBR of sda, using the following options: kernel-purge Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot =================== Settings chosen by the user Boot-Info This setting will not act on the MBR. No change has been performed on your computer. See you soon! pastebinit packages needed dpkg-preconfigure: unable to re-open stdin: No such file or directory pastebin.com ko (), using paste.ubuntu Please report this message to [email protected] Any help would be great, I'm really missing Ubuntu (hate being stuck in the Windows world).

    Read the article

  • Magento, NGINX, PHP-FPM, APC, MEMCACHED, 16gb Ram CentOS, Spiking PHP-FPM to 100% CPU

    - by Terry Dunford
    I have been trying to resolve my issue of spiking cpu caused by php-fpm processes. I've reduced the php-fpm config settings to: pm = ondemand pm.max_children = 12 pm.start_servers = 2 pm.min_spare_servers = 2 pm.max_spare_servers = 10 pm.max_requests = 500 php_admin_value[memory_limit] = 128M Problem still exists. I'm running a Joomla main site (which is having no problems) and a Magento store in a sub-directory. My server is a Linux CentOS, running NGINX, APC, Memcached, Full Page Cache and php-fpm. My server has 8 cores and 16gb dedicated ram. My host has shut down my server several times the past week because my php-fpm processes are consuming the entire network. A lot of the individual php-fpm processes are getting over 50% cpu. I've hired several "professionals" and none of them was able to help me, so now broke and stumped, I'm turning to you guys for help. So any suggestions would be greatly appreciated. I turned on slow php logs and here are some of the latest results: [01-Apr-2012 14:26:12] [pool magento] pid 21537 script_filename = /home/flyfish/www/flyshop/index.php [0x0000000011a394f8] _renderStraightjoin() /home/flyfish/www/flyshop/lib/Varien/Db/Select.php:397 [0x0000000011a39158] _renderStraightjoin() /home/flyfish/www/flyshop/lib/Zend/Db/Select.php:705 [0x0000000011a38f30] assemble() /home/flyfish/www/flyshop/lib/Zend/Db/Select.php:1343 [0x00007fffbb6d6e50] __toString() unknown:0 [0x0000000011a38630] _prepareQuery() /home/flyfish/www/flyshop/lib/Varien/Db/Adapter/Pdo/Mysql.php:409 [0x0000000011a38270] _prepareQuery() /home/flyfish/www/flyshop/lib/Varien/Db/Adapter/Pdo/Mysql.php:388 [0x0000000011a38008] query() /home/flyfish/www/flyshop/lib/Zend/Db/Adapter/Abstract.php:734 [0x0000000011a375c8] fetchAll() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Resource/Product/Type/Configurable/Attribute/Collection.php:196 [0x0000000011a370e0] _loadLabels() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Resource/Product/Type/Configurable/Attribute/Collection.php:129 [0x0000000011a369a0] _afterLoad() /home/flyfish/www/flyshop/lib/Varien/Data/Collection/Db.php:536 [0x0000000011a364a8] load() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Product/Type/Configurable.php:253 [0x0000000011a35968] getConfigurableAttributes() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Product/Type/Configurable.php:330 [0x0000000011a35590] getUsedProducts() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Product/Type/Configurable.php:458 [0x0000000011a35410] isSalable() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Product.php:1264 [0x0000000011a35098] isAvailable() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Product.php:1244 [0x0000000011a34fa8] isSalable() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Product.php:1308 [0x0000000011a33998] isSaleable() /home/flyfish/www/flyshop/app/design/frontend/moxy/default/template/rokmagemodules/rokmage-categoryview/rokmage-categoryview.phtml:122 [0x0000000011a331f0] +++ dump failed [01-Apr-2012 14:26:44] [pool magento] pid 21531 script_filename = /home/flyfish/www/flyshop/index.php [0x0000000011a37768] _loadPrices() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Resource/Product/Type/Configurable/Attribute/Collection.php:251 [0x0000000011a37280] _loadPrices() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Resource/Product/Type/Configurable/Attribute/Collection.php:132 [0x0000000011a36b40] _afterLoad() /home/flyfish/www/flyshop/lib/Varien/Data/Collection/Db.php:536 [0x0000000011a36648] load() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Product/Type/Configurable.php:253 [0x0000000011a35b08] getConfigurableAttributes() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Product/Type/Configurable.php:330 [0x0000000011a35730] getUsedProducts() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Product/Type/Configurable.php:458 [0x0000000011a355b0] isSalable() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Product.php:1264 [0x0000000011a35238] isAvailable() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Product.php:1244 [0x0000000011a35148] isSalable() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Product.php:1308 [0x0000000011a33b38] isSaleable() /home/flyfish/www/flyshop/app/design/frontend/moxy/default/template/rokmagemodules/rokmage-categoryview/rokmage-categoryview.phtml:122 [0x0000000011a33390] +++ dump failed [01-Apr-2012 14:27:01] [pool magento] pid 21528 script_filename = /home/flyfish/www/flyshop/index.php [0x0000000011ff67a8] execute() /home/flyfish/www/flyshop/lib/Zend/Db/Statement/Pdo.php:228 [0x0000000011ff6518] _execute() /home/flyfish/www/flyshop/lib/Varien/Db/Statement/Pdo/Mysql.php:110 [0x0000000011ff5e90] _execute() /home/flyfish/www/flyshop/lib/Zend/Db/Statement.php:300 [0x0000000011ff5a20] execute() /home/flyfish/www/flyshop/lib/Zend/Db/Adapter/Abstract.php:479 [0x0000000011ff5438] query() /home/flyfish/www/flyshop/lib/Zend/Db/Adapter/Pdo/Abstract.php:238 [0x0000000011ff5078] query() /home/flyfish/www/flyshop/lib/Varien/Db/Adapter/Pdo/Mysql.php:389 [0x0000000011ff4e98] query() /home/flyfish/www/flyshop/lib/Zend/Db/Adapter/Abstract.php:825 [0x0000000011ff4948] fetchOne() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Resource/Category/Flat.php:1161 [0x0000000011ff4678] getProductCount() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Category.php:801 [0x0000000011ff33e0] getProductCount() /home/flyfish/www/flyshop/app/code/local/Extendware/EWLayeredNav/Model/Library/Plugin/Catalog/Layer/Filter/Category.php:54 [0x0000000011ff2da0] _initItemsData() /home/flyfish/www/flyshop/app/code/local/Extendware/EWLayeredNav/Model/Library/Plugin/Catalog/Layer/Filter/Category.php:23 [0x0000000011ff2818] _getItemsData() /home/flyfish/www/flyshop/app/code/local/Extendware/EWLayeredNav/Model/Library/Plugin/Catalog/Layer/Filter/Category.php:119 [0x0000000011ff26b0] _initItems() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Layer/Filter/Abstract.php:120 [0x0000000011ff2598] getItems() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Layer/Filter/Abstract.php:109 [0x0000000011ff2480] getItemsCount() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Block/Layer/Filter/Abstract.php:126 [0x0000000011ff22b8] getItemsCount() /home/flyfish/www/flyshop/var/cache/extendware/ewcore/overrides/Mage/Catalog/Block/Layer/View/67dcc5dfa9c44bd3a205b75a08193105.php:218 [0x0000000011ff2088] canShowOptions() /home/flyfish/www/flyshop/var/cache/extendware/ewcore/overrides/Mage/Catalog/Block/Layer/View/67dcc5dfa9c44bd3a205b75a08193105.php:233 [0x0000000011ff14f8] canShowBlock() /home/flyfish/www/flyshop/app/design/frontend/moxy/default/template/extendware/ewlayerednav/catalog/layer/view.phtml:6 [0x0000000011ff0d50] +++ dump failed [01-Apr-2012 14:27:04] [pool magento] pid 21529 script_filename = /home/flyfish/www/flyshop/index.php [0x0000000012468ff8] execute() /home/flyfish/www/flyshop/lib/Zend/Db/Statement/Pdo.php:228 [0x0000000012468d68] _execute() /home/flyfish/www/flyshop/lib/Varien/Db/Statement/Pdo/Mysql.php:110 [0x00000000124686e0] _execute() /home/flyfish/www/flyshop/lib/Zend/Db/Statement.php:300 [0x0000000012468270] execute() /home/flyfish/www/flyshop/lib/Zend/Db/Adapter/Abstract.php:479 [0x0000000012467c88] query() /home/flyfish/www/flyshop/lib/Zend/Db/Adapter/Pdo/Abstract.php:238 [0x00000000124678c8] query() /home/flyfish/www/flyshop/lib/Varien/Db/Adapter/Pdo/Mysql.php:389 [0x0000000012467660] query() /home/flyfish/www/flyshop/lib/Zend/Db/Adapter/Abstract.php:734 [0x0000000012467248] fetchAll() /home/flyfish/www/flyshop/lib/Varien/Data/Collection/Db.php:687 [0x00000000124668f0] _fetchAll() /home/flyfish/www/flyshop/app/code/core/Mage/Eav/Model/Entity/Collection/Abstract.php:1045 [0x0000000012466288] _loadEntities() /home/flyfish/www/flyshop/app/code/core/Mage/Eav/Model/Entity/Collection/Abstract.php:869 [0x0000000012465fb0] load() /home/flyfish/www/flyshop/app/code/core/Mage/Review/Model/Observer.php:78 [0x0000000012465d10] catalogBlockProductCollectionBeforeToHtml() /home/flyfish/www/flyshop/app/code/core/Mage/Core/Model/App.php:1303 [0x0000000012464c28] _callObserverMethod() /home/flyfish/www/flyshop/app/code/core/Mage/Core/Model/App.php:1278 [0x00000000124649e0] dispatchEvent() /home/flyfish/www/flyshop/app/Mage.php:416 [0x0000000012464290] dispatchEvent() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Block/Product/List.php:163 [0x0000000012463760] _beforeToHtml() /home/flyfish/www/flyshop/var/ait_rewrite/6bfe16ca572eea47db567910902c6209.php:864 [0x00000000124633b0] toHtml() /home/flyfish/www/flyshop/var/ait_rewrite/6bfe16ca572eea47db567910902c6209.php:584 [0x0000000012462e30] _getChildHtml() /home/flyfish/www/flyshop/var/ait_rewrite/6bfe16ca572eea47db567910902c6209.php:528 [0x0000000012462d38] getChildHtml() /home/flyfish/www/flyshop/var/cache/extendware/ewcore/overrides/Mage/Catalog/Block/Category/View/6362e7526f5dcb27e7f8b0b414b59004.php:85 [0x00000000124629f0] getProductListHtml() /home/flyfish/www/flyshop/app/code/local/Extendware/EWLayeredNav/Block/Override/Mage/Catalog/Category/View.php:20 [01-Apr-2012 14:27:55] [pool magento] pid 21536 script_filename = /home/flyfish/www/flyshop/index.php [0x0000000011a35010] execute() /home/flyfish/www/flyshop/lib/Zend/Db/Statement/Pdo.php:228 [0x0000000011a34d80] _execute() /home/flyfish/www/flyshop/lib/Varien/Db/Statement/Pdo/Mysql.php:110 [0x0000000011a346f8] _execute() /home/flyfish/www/flyshop/lib/Zend/Db/Statement.php:300 [0x0000000011a34288] execute() /home/flyfish/www/flyshop/lib/Zend/Db/Adapter/Abstract.php:479 [0x0000000011a33ca0] query() /home/flyfish/www/flyshop/lib/Zend/Db/Adapter/Pdo/Abstract.php:238 [0x0000000011a338e0] query() /home/flyfish/www/flyshop/lib/Varien/Db/Adapter/Pdo/Mysql.php:389 [0x0000000011a33700] query() /home/flyfish/www/flyshop/lib/Zend/Db/Adapter/Abstract.php:825 [0x0000000011a33368] fetchOne() /home/flyfish/www/flyshop/app/code/core/Mage/Eav/Model/Resource/Entity/Type.php:71 [0x0000000011a33238] getAdditionalAttributeTable() /home/flyfish/www/flyshop/app/code/core/Mage/Eav/Model/Resource/Entity/Attribute.php:483 [0x0000000011a32be8] getAdditionalAttributeTable() /home/flyfish/www/flyshop/app/code/core/Mage/Eav/Model/Resource/Entity/Attribute.php:500 [0x0000000011a32860] _afterLoad() /home/flyfish/www/flyshop/app/code/core/Mage/Eav/Model/Resource/Entity/Attribute.php:108 [0x0000000011a32330] loadByCode() /home/flyfish/www/flyshop/app/code/core/Mage/Eav/Model/Entity/Attribute/Abstract.php:118 [0x0000000011a31350] loadByCode() /home/flyfish/www/flyshop/app/code/core/Mage/Eav/Model/Config.php:423 [0x0000000011a30ce8] getAttribute() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Helper/Output.php:156 [0x0000000011a30208] categoryAttribute() /home/flyfish/www/flyshop/app/design/frontend/base/default/template/catalog/category/view.phtml:47 [0x0000000011a2fa60] +++ dump failed [01-Apr-2012 14:27:56] [pool magento] pid 21530 script_filename = /home/flyfish/www/flyshop/index.php [0x0000000011a35b10] updateParamDefaults() /home/flyfish/www/flyshop/var/ait_rewrite/78778b0d1ad4bf93e846365bd2fbf33f.php:276 [0x0000000011a35750] updateParamDefaults() /home/flyfish/www/flyshop/var/ait_rewrite/78778b0d1ad4bf93e846365bd2fbf33f.php:326 [0x0000000011a351f0] getSkinBaseUrl() /home/flyfish/www/flyshop/var/ait_rewrite/78778b0d1ad4bf93e846365bd2fbf33f.php:482 [0x0000000011a350a8] getSkinUrl() /home/flyfish/www/flyshop/var/ait_rewrite/6bfe16ca572eea47db567910902c6209.php:981 [0x0000000011a32468] getSkinUrl() /home/flyfish/www/flyshop/app/code/local/Extendware/EWMinify/Block/Override/Mage/Page/Html/Head.php:126 [0x0000000011a30ca8] getCssJsHtml() /home/flyfish/www/flyshop/app/code/local/Extendware/EWCore/Block/Override/Mage/Page/Html/Head.php:55 [0x0000000011a30978] getCssJsHtml() /home/flyfish/www/flyshop/app/code/local/MageWorx/SeoSuite/Block/Page/Html/Head.php:41 [0x0000000011a2fd10] getCssJsHtml() /home/flyfish/www/flyshop/app/design/frontend/moxy/default/template/rokmagemodules/rokmage-modalheader/rokmage-head.phtml:26 [0x0000000011a2f568] +++ dump failed [01-Apr-2012 14:28:28] [pool magento] pid 21527 script_filename = /home/flyfish/www/flyshop/index.php [0x0000000010c7bba0] execute() /home/flyfish/www/flyshop/lib/Zend/Db/Statement/Pdo.php:228 [0x0000000010c7b910] _execute() /home/flyfish/www/flyshop/lib/Varien/Db/Statement/Pdo/Mysql.php:110 [0x0000000010c7b288] _execute() /home/flyfish/www/flyshop/lib/Zend/Db/Statement.php:300 [0x0000000010c7ae18] execute() /home/flyfish/www/flyshop/lib/Zend/Db/Adapter/Abstract.php:479 [0x0000000010c7a830] query() /home/flyfish/www/flyshop/lib/Zend/Db/Adapter/Pdo/Abstract.php:238 [0x0000000010c7a470] query() /home/flyfish/www/flyshop/lib/Varien/Db/Adapter/Pdo/Mysql.php:389 [0x0000000010c7a168] query() /home/flyfish/www/flyshop/lib/Zend/Db/Adapter/Abstract.php:808 [0x0000000010c79558] fetchPairs() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Resource/Product/Collection.php:840 [0x0000000010c79240] addCountToCategories() /home/flyfish/www/flyshop/app/code/community/Mage/Catalog/Block/Navigation.php:133 [0x0000000010c71d48] getCurrentChildCategories() /home/flyfish/www/flyshop/app/design/frontend/base/default/template/rokmagemodules/rokmage-magemenus/rokmage-magemenu-left.phtml:139 [0x0000000010c715a0] +++ dump failed [01-Apr-2012 14:28:28] [pool magento] pid 21577 script_filename = /home/flyfish/www/flyshop/index.php [0x0000000011a3a8d8] execute() /home/flyfish/www/flyshop/lib/Zend/Db/Statement/Pdo.php:228 [0x0000000011a3a648] _execute() /home/flyfish/www/flyshop/lib/Varien/Db/Statement/Pdo/Mysql.php:110 [0x0000000011a39fc0] _execute() /home/flyfish/www/flyshop/lib/Zend/Db/Statement.php:300 [0x0000000011a39b50] execute() /home/flyfish/www/flyshop/lib/Zend/Db/Adapter/Abstract.php:479 [0x0000000011a39568] query() /home/flyfish/www/flyshop/lib/Zend/Db/Adapter/Pdo/Abstract.php:238 [0x0000000011a391a8] query() /home/flyfish/www/flyshop/lib/Varien/Db/Adapter/Pdo/Mysql.php:389 [0x0000000011a38f40] query() /home/flyfish/www/flyshop/lib/Zend/Db/Adapter/Abstract.php:734 [0x0000000011a37cc0] fetchAll() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Resource/Category/Flat.php:276 [0x0000000011a37b20] _loadNodes() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Resource/Category/Flat.php:1229 [0x0000000011a379a0] getChildrenCategories() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Category.php:841 [0x0000000011a37690] getChildrenCategories() /home/flyfish/www/flyshop/app/code/community/Mage/Catalog/Block/Navigation.php:130 [0x0000000011a30198] getCurrentChildCategories() /home/flyfish/www/flyshop/app/design/frontend/base/default/template/rokmagemodules/rokmage-magemenus/rokmage-magemenu-left.phtml:139 [0x0000000011a2f9f0] +++ dump failed [01-Apr-2012 14:28:48] [pool magento] pid 21629 script_filename = /home/flyfish/www/flyshop/index.php [0x00002ac987e2cb48] _loadPrices() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Resource/Product/Type/Configurable/Attribute/Collection.php:252 [0x00002ac987e2c660] _loadPrices() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Resource/Product/Type/Configurable/Attribute/Collection.php:132 [0x00002ac987e2bf20] _afterLoad() /home/flyfish/www/flyshop/lib/Varien/Data/Collection/Db.php:536 [0x00002ac987e2ba28] load() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Product/Type/Configurable.php:253 [0x00002ac987e2aee8] getConfigurableAttributes() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Product/Type/Configurable.php:330 [0x00002ac987e2ab10] getUsedProducts() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Product/Type/Configurable.php:458 [0x00002ac987e2a990] isSalable() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Product.php:1264 [0x00002ac987e2a618] isAvailable() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Product.php:1244 [0x00002ac987e2a528] isSalable() /home/flyfish/www/flyshop/app/code/core/Mage/Catalog/Model/Product.php:1308 [0x00002ac987e28f18] isSaleable() /home/flyfish/www/flyshop/app/design/frontend/moxy/default/template/rokmagemodules/rokmage-categoryview/rokmage-categoryview.phtml:122 [0x00002ac987e28770] +++ dump failed ___________________________________________ A snippet of the Latest php-fpm error log: [01-Apr-2012 14:26:12] WARNING: [pool magento] child 21537, script '/home/flyfish/www/flyshop/index.php' (request: "GET /flyshop/index.php") executing too slow (5.265105 sec), logging [01-Apr-2012 14:26:12] ERROR: failed to ptrace(PEEKDATA) pid 21537: Input/output error (5) [01-Apr-2012 14:26:44] WARNING: [pool magento] child 21531, script '/home/flyfish/www/flyshop/index.php' (request: "GET /flyshop/index.php") executing too slow (5.268434 sec), logging [01-Apr-2012 14:26:44] ERROR: failed to ptrace(PEEKDATA) pid 21531: Input/output error (5) [01-Apr-2012 14:27:01] WARNING: [pool magento] child 21528, script '/home/flyfish/www/flyshop/index.php' (request: "GET /flyshop/index.php") executing too slow (6.656633 sec), logging [01-Apr-2012 14:27:01] ERROR: failed to ptrace(PEEKDATA) pid 21528: Input/output error (5) [01-Apr-2012 14:27:04] WARNING: [pool magento] child 21529, script '/home/flyfish/www/flyshop/index.php' (request: "GET /flyshop/index.php") executing too slow (5.211136 sec), logging [01-Apr-2012 14:27:55] WARNING: [pool magento] child 21536, script '/home/flyfish/www/flyshop/index.php' (request: "GET /flyshop/index.php") executing too slow (5.207001 sec), logging [01-Apr-2012 14:27:55] ERROR: failed to ptrace(PEEKDATA) pid 21536: Input/output error (5) [01-Apr-2012 14:27:56] WARNING: [pool magento] child 21530, script '/home/flyfish/www/flyshop/index.php' (request: "GET /flyshop/index.php") executing too slow (5.503186 sec), logging [01-Apr-2012 14:27:56] ERROR: failed to ptrace(PEEKDATA) pid 21530: Input/output error (5) [01-Apr-2012 14:28:28] WARNING: [pool magento] child 21577, script '/home/flyfish/www/flyshop/index.php' (request: "GET /flyshop/index.php") executing too slow (5.722625 sec), logging [01-Apr-2012 14:28:28] WARNING: [pool magento] child 21527, script '/home/flyfish/www/flyshop/index.php' (request: "GET /flyshop/index.php") executing too slow (5.122326 sec), logging [01-Apr-2012 14:28:28] ERROR: failed to ptrace(PEEKDATA) pid 21527: Input/output error (5) [01-Apr-2012 14:28:28] ERROR: failed to ptrace(PEEKDATA) pid 21577: Input/output error (5) [01-Apr-2012 14:28:48] WARNING: [pool magento] child 21629, script '/home/flyfish/www/flyshop/index.php' (request: "GET /flyshop/index.php") executing too slow (5.446961 sec), logging [01-Apr-2012 14:28:48] ERROR: failed to ptrace(PEEKDATA) pid 21629: Input/output error (5) _____________________________________________ I also noticed that the server is not using much memory: Mem: 16777216k total, 1204040k used, 15573176k free My.conf settings: query_cache_size = 128M innodb_buffer_pool_size = 512M open-files-limit = 8192 table_cache=4096 I just noticed that someone changed my innodb_buffer_pool_size to 512M. Shouldn't this be set to 80% of available ram? So I have 16gb ram so it should be set at 12G; however, I set it at 10G. What do you think? I made that change and restart everything. Php-fpm is still spiking cpu. Here is just 1 php-fpm process: 23942 user 17 0 507m 99m 27m R 90.9%CPU 0.6 0:03.46 php-fpm I'm sure there may be more information you will need to help, so just let me know what you guys need to help me figure this out. Thank you.

    Read the article

  • Bitnami redmine error SVN

    - by Evgeniy
    I'm installing the Bitnami Redmine stack (redmine + subversion). Firstly I install configure and test it locally (Ubuntu 14.04 LTS). And everything is OK. I install Bitnami stack on server (Red Hat 4.4.7-4) and configure SVN. I commit files into SVN and connect project into Redmine with SVN repository, but when I try see it Rredmine displays 404 error. In the Redmine log file I see the following errors: Started GET "/redmine/projects/web-user-panel/repository" for 127.0.0.1 at 2014-04-24 11:34:20 +0300 Processing by RepositoriesController#show as HTML Parameters: {"id"=>"web-user-panel"} Current user: user (id=13) Error parsing svn output: #<REXML::ParseException: No close tag for /lists/list> /var/www/html/redmine/ruby/lib/ruby/1.9.1/rexml/parsers/treeparser.rb:28:in `parse' /var/www/html/redmine/ruby/lib/ruby/1.9.1/rexml/document.rb:245:in `build' /var/www/html/redmine/ruby/lib/ruby/1.9.1/rexml/document.rb:43:in `initialize' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/xml_mini/rexml.rb:30:in `new' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/xml_mini/rexml.rb:30:in `parse' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/xml_mini.rb:80:in `parse' /var/www/html/redmine/apps/redmine/htdocs/lib/redmine/scm/adapters/abstract_adapter.rb:313:in `parse_xml' /var/www/html/redmine/apps/redmine/htdocs/lib/redmine/scm/adapters/subversion_adapter.rb:106:in `block in entries' /var/www/html/redmine/apps/redmine/htdocs/lib/redmine/scm/adapters/abstract_adapter.rb:258:in `call' /var/www/html/redmine/apps/redmine/htdocs/lib/redmine/scm/adapters/abstract_adapter.rb:258:in `block in shellout' /var/www/html/redmine/apps/redmine/htdocs/lib/redmine/scm/adapters/abstract_adapter.rb:255:in `popen' /var/www/html/redmine/apps/redmine/htdocs/lib/redmine/scm/adapters/abstract_adapter.rb:255:in `shellout' /var/www/html/redmine/apps/redmine/htdocs/lib/redmine/scm/adapters/abstract_adapter.rb:212:in `shellout' /var/www/html/redmine/apps/redmine/htdocs/lib/redmine/scm/adapters/subversion_adapter.rb:100:in `entries' /var/www/html/redmine/apps/redmine/htdocs/app/models/repository.rb:198:in `scm_entries' /var/www/html/redmine/apps/redmine/htdocs/app/models/repository.rb:203:in `entries' /var/www/html/redmine/apps/redmine/htdocs/app/controllers/repositories_controller.rb:116:in `show' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_controller/metal/implicit_render.rb:4:in `send_action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/abstract_controller/base.rb:167:in `process_action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_controller/metal/rendering.rb:10:in `process_action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/abstract_controller/callbacks.rb:18:in `block in process_action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/callbacks.rb:491:in `_run__2883861927089110970__process_action__2542827355008294621__callbacks' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/callbacks.rb:405:in `__run_callback' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/callbacks.rb:385:in `_run_process_action_callbacks' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/callbacks.rb:81:in `run_callbacks' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/abstract_controller/callbacks.rb:17:in `process_action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_controller/metal/rescue.rb:29:in `process_action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_controller/metal/instrumentation.rb:30:in `block in process_action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/notifications.rb:123:in `block in instrument' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/notifications/instrumenter.rb:20:in `instrument' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/notifications.rb:123:in `instrument' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_controller/metal/instrumentation.rb:29:in `process_action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_controller/metal/params_wrapper.rb:207:in `process_action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activerecord-3.2.17/lib/active_record/railties/controller_runtime.rb:18:in `process_action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/abstract_controller/base.rb:121:in `process' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/abstract_controller/rendering.rb:45:in `process' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_controller/metal.rb:203:in `dispatch' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_controller/metal/rack_delegation.rb:14:in `dispatch' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_controller/metal.rb:246:in `block in action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/routing/route_set.rb:73:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/routing/route_set.rb:73:in `dispatch' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/routing/route_set.rb:36:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/journey-1.0.4/lib/journey/router.rb:68:in `block in call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/journey-1.0.4/lib/journey/router.rb:56:in `each' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/journey-1.0.4/lib/journey/router.rb:56:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/routing/route_set.rb:608:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-openid-1.3.1/lib/rack/openid.rb:98:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/best_standards_support.rb:17:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/etag.rb:23:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/conditionalget.rb:25:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/head.rb:14:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/params_parser.rb:21:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/flash.rb:242:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/session/abstract/id.rb:210:in `context' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/session/abstract/id.rb:205:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/cookies.rb:341:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activerecord-3.2.17/lib/active_record/query_cache.rb:64:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activerecord-3.2.17/lib/active_record/connection_adapters/abstract/connection_pool.rb:479:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/callbacks.rb:28:in `block in call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/callbacks.rb:405:in `_run__1805290955544829105__call__1486932417638469082__callbacks' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/callbacks.rb:405:in `__run_callback' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/callbacks.rb:385:in `_run_call_callbacks' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/callbacks.rb:81:in `run_callbacks' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/callbacks.rb:27:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/remote_ip.rb:31:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/debug_exceptions.rb:16:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/show_exceptions.rb:56:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/railties-3.2.17/lib/rails/rack/logger.rb:32:in `call_app' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/railties-3.2.17/lib/rails/rack/logger.rb:16:in `block in call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/tagged_logging.rb:22:in `tagged' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/railties-3.2.17/lib/rails/rack/logger.rb:16:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/request_id.rb:22:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/methodoverride.rb:21:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/runtime.rb:17:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/cache/strategy/local_cache.rb:72:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/lock.rb:15:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/static.rb:63:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-cache-1.2/lib/rack/cache/context.rb:136:in `forward' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-cache-1.2/lib/rack/cache/context.rb:245:in `fetch' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-cache-1.2/lib/rack/cache/context.rb:185:in `lookup' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-cache-1.2/lib/rack/cache/context.rb:66:in `call!' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-cache-1.2/lib/rack/cache/context.rb:51:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/railties-3.2.17/lib/rails/engine.rb:484:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/railties-3.2.17/lib/rails/application.rb:231:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/railties-3.2.17/lib/rails/railtie/configurable.rb:30:in `method_missing' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/builder.rb:134:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/urlmap.rb:64:in `block in call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/urlmap.rb:49:in `each' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/urlmap.rb:49:in `call' /var/www/html/redmine/ruby/lib/ruby/gems/1.9.1/gems/passenger-4.0.40/lib/phusion_passenger/rack/thread_handler_extension.rb:74:in `process_request' /var/www/html/redmine/ruby/lib/ruby/gems/1.9.1/gems/passenger-4.0.40/lib/phusion_passenger/request_handler/thread_handler.rb:141:in `accept_and_process_next_request' /var/www/html/redmine/ruby/lib/ruby/gems/1.9.1/gems/passenger-4.0.40/lib/phusion_passenger/request_handler/thread_handler.rb:109:in `main_loop' /var/www/html/redmine/ruby/lib/ruby/gems/1.9.1/gems/passenger-4.0.40/lib/phusion_passenger/request_handler.rb:448:in `block (3 levels) in start_threads' ... No close tag for /lists/list Line: 4 Position: 93 Last 80 unconsumed characters: Output was: <?xml version="1.0" encoding="UTF-8"?> <lists> <list path="svn://127.0.0.1/voxysuser"> Rendered common/error.html.erb within layouts/base (0.1ms) Completed 404 Not Found in 69.1ms (Views: 15.1ms | ActiveRecord: 3.0ms) How can I resolve this problem? I googled it, but similar problem fixed should be fixed 3 years ago. I'm installing the latest Bitnami Redmine 2.5.1-1 stack. UPDATE Well, I found next way. If I use the http protocol it works fine, but I should remove access for svn by web. That's why I create virtual host on localhost and get info from svn use 127.0.0.1 IP. <VirtualHost 127.0.0.1:8000> <Location /repo> DAV svn SVNPath "PATH_TO_MY_REPOSITORY" </Location> And this it work good.

    Read the article

  • Unable to connect java webservie to android

    - by nag prakash
    This is my android activity. Please help me out. I will send the project completely if you can drop your mail id. package prakash.ws.connectsql; import org.ksoap2.SoapEnvelope; import org.ksoap2.serialization.SoapObject; import org.ksoap2.serialization.SoapPrimitive; import org.ksoap2.serialization.SoapSerializationEnvelope; import org.ksoap2.transport.AndroidHttpTransport; import android.os.Bundle; import android.app.Activity; import android.widget.EditText; import android.widget.TextView; public class MainActivity extends Activity { private static final String Soap_Action="http://testws.ws.prakash/testws"; private static final String Method_Name="testws"; private static final String Name_Space="http://testws.ws.prakash/"; private static final String URI="http://localhost:8045/testws/services/Testws?wsdl"; EditText ET; TextView Tv; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); // Packeting the request SoapObject request=new SoapObject(Name_Space,Method_Name); // pass the parameters to the method.If it has one request.addProperty("name", ET.getText().toString()); //passing the entire request to the envelope SoapSerializationEnvelope soapEnvelope=new SoapSerializationEnvelope(SoapEnvelope.VER11); soapEnvelope.setOutputSoapObject(request); //transporting envelope AndroidHttpTransport aht=new AndroidHttpTransport(URI); try{ aht.call(Soap_Action, soapEnvelope); @SuppressWarnings("deprecation") SoapPrimitive resultString=(SoapPrimitive) soapEnvelope.getResult(); Tv.setText(resultString.toString()); }catch(Exception e) { Tv.setText("error"); } } } This XML file does not appear to have any style information associated with it. The document tree is shown below. <wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:ns1="http://org.apache.axis2/xsd" xmlns:ns="http://testws.ws.prakash" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" targetNamespace="http://testws.ws.prakash"> <wsdl:documentation>Please Type your service description here</wsdl:documentation> <wsdl:types> <xs:schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://testws.ws.prakash"> <xs:element name="testws"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="name" nillable="true" type="xs:string"/> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="testwsResponse"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="return" nillable="true" type="xs:string"/> </xs:sequence> </xs:complexType> </xs:element> </xs:schema> </wsdl:types> <wsdl:message name="testwsRequest"> <wsdl:part name="parameters" element="ns:testws"/> </wsdl:message> <wsdl:message name="testwsResponse"> <wsdl:part name="parameters" element="ns:testwsResponse"/> </wsdl:message> <wsdl:portType name="TestwsPortType"> <wsdl:operation name="testws"> <wsdl:input message="ns:testwsRequest" wsaw:Action="urn:testws"/> <wsdl:output message="ns:testwsResponse" wsaw:Action="urn:testwsResponse"/> </wsdl:operation> </wsdl:portType> <wsdl:binding name="TestwsSoap11Binding" type="ns:TestwsPortType"> <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/> <wsdl:operation name="testws"> <soap:operation soapAction="urn:testws" style="document"/> <wsdl:input> <soap:body use="literal"/> </wsdl:input> <wsdl:output> <soap:body use="literal"/> </wsdl:output> </wsdl:operation> </wsdl:binding> <wsdl:binding name="TestwsSoap12Binding" type="ns:TestwsPortType"> <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/> <wsdl:operation name="testws"> <soap12:operation soapAction="urn:testws" style="document"/> <wsdl:input> <soap12:body use="literal"/> </wsdl:input> <wsdl:output> <soap12:body use="literal"/> </wsdl:output> </wsdl:operation> </wsdl:binding> <wsdl:binding name="TestwsHttpBinding" type="ns:TestwsPortType"> <http:binding verb="POST"/> <wsdl:operation name="testws"> <http:operation location="testws"/> <wsdl:input> <mime:content type="text/xml" part="parameters"/> </wsdl:input> <wsdl:output> <mime:content type="text/xml" part="parameters"/> </wsdl:output> </wsdl:operation> </wsdl:binding> <wsdl:service name="Testws"> <wsdl:port name="TestwsHttpSoap11Endpoint" binding="ns:TestwsSoap11Binding"> <soap:address location="http://localhost:8045/testws/services/Testws.TestwsHttpSoap11Endpoint/"/> </wsdl:port> <wsdl:port name="TestwsHttpSoap12Endpoint" binding="ns:TestwsSoap12Binding"> <soap12:address location="http://localhost:8045/testws/services/Testws.TestwsHttpSoap12Endpoint/"/> </wsdl:port> <wsdl:port name="TestwsHttpEndpoint" binding="ns:TestwsHttpBinding"> <http:address location="http://localhost:8045/testws/services/Testws.TestwsHttpEndpoint/"/> </wsdl:port> </wsdl:service> </wsdl:definitions> this web service is running fine in the server. Manifest File I have added the internet Permission. Now this is the error in the logcat. 07-04 21:31:00.757: E/dalvikvm(375): Could not find class 'org.ksoap2.serialization.SoapObject', referenced from method prakash.ws.connectsql.MainActivity.onCreate 07-04 21:31:00.757: W/dalvikvm(375): VFY: unable to resolve new-instance 481 (Lorg/ksoap2/serialization/SoapObject;) in Lprakash/ws/connectsql/MainActivity; 07-04 21:31:00.757: D/dalvikvm(375): VFY: replacing opcode 0x22 at 0x0008 07-04 21:31:00.757: D/dalvikvm(375): VFY: dead code 0x000a-004e in Lprakash/ws/connectsql/MainActivity;.onCreate (Landroid/os/Bundle;)V 07-04 21:31:00.937: D/AndroidRuntime(375): Shutting down VM 07-04 21:31:00.937: W/dalvikvm(375): threadid=1: thread exiting with uncaught exception (group=0x40015560) 07-04 21:31:00.957: E/AndroidRuntime(375): FATAL EXCEPTION: main 07-04 21:31:00.957: E/AndroidRuntime(375): java.lang.NoClassDefFoundError: org.ksoap2.serialization.SoapObject 07-04 21:31:00.957: E/AndroidRuntime(375): at prakash.ws.connectsql.MainActivity.onCreate(MainActivity.java:30) 07-04 21:31:00.957: E/AndroidRuntime(375): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1047) 07-04 21:31:00.957: E/AndroidRuntime(375): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:1611) 07-04 21:31:00.957: E/AndroidRuntime(375): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:1663) 07-04 21:31:00.957: E/AndroidRuntime(375): at android.app.ActivityThread.access$1500(ActivityThread.java:117) 07-04 21:31:00.957: E/AndroidRuntime(375): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:931) 07-04 21:31:00.957: E/AndroidRuntime(375): at android.os.Handler.dispatchMessage(Handler.java:99) 07-04 21:31:00.957: E/AndroidRuntime(375): at android.os.Looper.loop(Looper.java:123) 07-04 21:31:00.957: E/AndroidRuntime(375): at android.app.ActivityThread.main(ActivityThread.java:3683) 07-04 21:31:00.957: E/AndroidRuntime(375): at java.lang.reflect.Method.invokeNative(Native Method) 07-04 21:31:00.957: E/AndroidRuntime(375): at java.lang.reflect.Method.invoke(Method.java:507) 07-04 21:31:00.957: E/AndroidRuntime(375): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:839) 07-04 21:31:00.957: E/AndroidRuntime(375): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:597) 07-04 21:31:00.957: E/AndroidRuntime(375): at dalvik.system.NativeStart.main(Native Method) 07-04 21:31:05.307: I/Process(375): Sending signal. PID: 375 SIG: 9

    Read the article

  • Inbound SIP calls through Cisco 881 NAT hang up after a few seconds

    - by MasterRoot24
    I've recently moved to a Cisco 881 router for my WAN link. I was previously using a Cisco Linksys WAG320N as my modem/router/WiFi AP/NAT firewall. The WAG320N is now running in bridged mode, so it's simply acting as a modem with one of it's LAN ports connected to FE4 WAN on my Cisco 881. The Cisco 881 get's a DHCP provided IP from my ISP. My LAN is part of default Vlan 1 (192.168.1.0/24). General internet connectivity is working great, I've managed to setup static NAT rules for my HTTP/HTTPS/SMTP/etc. services which are running on my LAN. I don't know whether it's worth mentioning that I've opted to use NVI NAT (ip nat enable as opposed to the traditional ip nat outside/ip nat inside) setup. My reason for this is that NVI allows NAT loopback from my LAN to the WAN IP and back in to the necessary server on the LAN. I run an Asterisk 1.8 PBX on my LAN, which connects to a SIP provider on the internet. Both inbound and outbound calls through the old setup (WAG320N providing routing/NAT) worked fine. However, since moving to the Cisco 881, inbound calls drop after around 10 seconds, whereas outbound calls work fine. The following message is logged on my Asterisk PBX: [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3641 retrans_pkt: Retransmission timeout reached on transmission [email protected] for seqno 1 (Critical Response) -- See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions Packet timed out after 6528ms with no response [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3670 retrans_pkt: Hanging up call [email protected] - no reply to our critical packet (see https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions). (I know that this is quite a common issue - I've spend the best part of 2 days solid on this, trawling Google.) I've done as I am told and checked https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions. Referring to the section "Other SIP requests" in the page linked above, I believe that the hangup to be caused by the ACK from my SIP provider not being passed back through NAT to Asterisk on my PBX. I tried to ascertain this by dumping the packets on my WAN interface on the 881. I managed to obtain a PCAP dump of packets in/out of my WAN interface. Here's an example of an ACK being reveived by the router from my provider: 689 21.219999 193.x.x.x 188.x.x.x SIP 502 Request: ACK sip:[email protected] | However a SIP trace on the Asterisk server show's that there are no ACK's received in response to the 200 OK from my PBX: http://pastebin.com/wwHpLPPz In the past, I have been strongly advised to disable any sort of SIP ALGs on routers and/or firewalls and the many posts regarding this issue on the internet seem to support this. However, I believe on Cisco IOS, the config command to disable SIP ALG is no ip nat service sip udp port 5060 however, this doesn't appear to help the situation. To confirm that config setting is set: Router1#show running-config | include sip no ip nat service sip udp port 5060 Another interesting twist: for a short period of time, I tried another provider. Luckily, my trial account with them is still available, so I reverted my Asterisk config back to the revision before I integrated with my current provider. I then dialled in to the DDI associated with the trial trunk and the call didn't get hung up and I didn't get the error above! To me, this points at the provider, however I know, like all providers do, will say "There's no issues with our SIP proxies - it's your firewall." I'm tempted to agree with this, as this issue was not apparent with the old WAG320N router when it was doing the NAT'ing. I'm sure you'll want to see my running-config too: ! ! Last configuration change at 15:55:07 UTC Sun Dec 9 2012 by xxx version 15.2 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec localtime show-timezone service timestamps log datetime msec localtime show-timezone no service password-encryption service sequence-numbers ! hostname Router1 ! boot-start-marker boot-end-marker ! ! security authentication failure rate 10 log security passwords min-length 6 logging buffered 4096 logging console critical enable secret 4 xxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 quit no ip source-route no ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! no ip bootp server ip domain name dmz.merlin.local ip domain list dmz.merlin.local ip domain list merlin.local ip name-server x.x.x.x ip inspect audit-trail ip inspect udp idle-time 1800 ip inspect dns-timeout 7 ip inspect tcp idle-time 14400 ip inspect name autosec_inspect ftp timeout 3600 ip inspect name autosec_inspect http timeout 3600 ip inspect name autosec_inspect rcmd timeout 3600 ip inspect name autosec_inspect realaudio timeout 3600 ip inspect name autosec_inspect smtp timeout 3600 ip inspect name autosec_inspect tftp timeout 30 ip inspect name autosec_inspect udp timeout 15 ip inspect name autosec_inspect tcp timeout 3600 ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn ! ! username xxx privilege 15 secret 4 xxx username xxx secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp no ip redirects no ip unreachables no ip proxy-arp ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.1 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.2 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ! no ip nat service sip udp port 5060 ip nat source list 1 interface FastEthernet4 overload ip nat source static tcp x.x.x.x 80 interface FastEthernet4 80 ip nat source static tcp x.x.x.x 443 interface FastEthernet4 443 ip nat source static tcp x.x.x.x 25 interface FastEthernet4 25 ip nat source static tcp x.x.x.x 587 interface FastEthernet4 587 ip nat source static tcp x.x.x.x 143 interface FastEthernet4 143 ip nat source static tcp x.x.x.x 993 interface FastEthernet4 993 ip nat source static tcp x.x.x.x 1723 interface FastEthernet4 1723 ! ! logging trap debugging logging facility local2 access-list 1 permit 192.168.1.0 0.0.0.255 access-list 1 permit 192.168.0.0 0.0.0.255 no cdp run ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 login authentication local_auth length 0 transport output all line aux 0 exec-timeout 15 0 login authentication local_auth transport output all line vty 0 1 access-class 1 in logging synchronous login authentication local_auth length 0 transport preferred none transport input telnet transport output all line vty 2 4 access-class 1 in login authentication local_auth length 0 transport input ssh transport output all ! ! end ...and, if it's of any use, here's my Asterisk SIP config: [general] context=default ; Default context for calls allowoverlap=no ; Disable overlap dialing support. (Default is yes) udpbindaddr=0.0.0.0 ; IP address to bind UDP listen socket to (0.0.0.0 binds to all) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) tcpenable=no ; Enable server for incoming TCP connections (default is no) tcpbindaddr=0.0.0.0 ; IP address for TCP server to bind to (0.0.0.0 binds to all interfaces) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) srvlookup=yes ; Enable DNS SRV lookups on outbound calls ; Note: Asterisk only uses the first host ; in SRV records ; Disabling DNS SRV lookups disables the ; ability to place SIP calls based on domain ; names to some other SIP users on the Internet ; Specifying a port in a SIP peer definition or ; when dialing outbound calls will supress SRV ; lookups for that peer or call. directmedia=no ; Don't allow direct RTP media between extensions (doesn't work through NAT) externhost=<MY DYNDNS HOSTNAME> ; Our external hostname to resolve to IP and be used in NAT'ed packets localnet=192.168.1.0/24 ; Define our local network so we know which packets need NAT'ing qualify=yes ; Qualify peers by default dtmfmode=rfc2833 ; Set the default DTMF mode disallow=all ; Disallow all codecs by default allow=ulaw ; Allow G.711 u-law allow=alaw ; Allow G.711 a-law ; ---------------------- ; SIP Trunk Registration ; ---------------------- ; Orbtalk register => <MY SIP PROVIDER USER NAME>:[email protected]/<MY DDI> ; Main Orbtalk number ; ---------- ; Trunks ; ---------- [orbtalk] ; Main Orbtalk trunk type=peer insecure=invite host=sipgw3.orbtalk.co.uk nat=yes username=<MY SIP PROVIDER USER NAME> defaultuser=<MY SIP PROVIDER USER NAME> fromuser=<MY SIP PROVIDER USER NAME> secret=xxx context=inbound I really don't know where to go with this. If anyone can help me find out why these calls are being dropped off, I'd be grateful if you could chime in! Please let me know if any further info is required.

    Read the article

  • Apache + Codeigniter + New Server + Unexpected Errors

    - by ngl5000
    Alright here is the situation: I use to have my codeigniter site at bluehost were I did not have root access, I have since moved that site to rackspace. I have not changed any of the PHP code yet there has been some unexpected behavior. Unexpected Behavior: http://mysite.com/robots.txt Both old and new resolve to the robots file http://mysite.com/robots.txt/ The old bluehost setup resolves to my codeigniter 404 error page. The rackspace config resolves to: Not Found The requested URL /robots.txt/ was not found on this server. **This instance leads me to believe that there could be a problem with my mod rewrites or lack there of. The first one produces the error correctly through php while it seems the second senario lets the server handle this error. The next instance of this problem is even more troubling: 'http://mysite.com/search/term/9 x 1-1%2F2 white/' New site results in: Bad Request Your browser sent a request that this server could not understand. Old site results in: The actual page being loaded and the search term being unencoded. I have to assume that this has something to do with the fact that when I went to the new server I went from root level htaccess file to httpd.conf file and virtual server default and default-ssl. Here they are: Default file: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName mysite.com DocumentRoot /var/www <Directory /> Options +FollowSymLinks AllowOverride None </Directory> <Directory /var/www> Options -Indexes +FollowSymLinks -MultiViews AllowOverride None Order allow,deny allow from all RewriteEngine On RewriteBase / # force no www. (also does the IP thing) RewriteCond %{HTTPS} !=on RewriteCond %{HTTP_HOST} !^mysite\.com [NC] RewriteRule ^(.*)$ http://mysite.com/$1 [R=301,L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.+)\.(\d+)\.(js|css|png|jpg|gif)$ $1.$3 [L] # index.php remove any index.php parts RewriteCond %{THE_REQUEST} /index\.(php|html) RewriteRule (.*)index\.(php|html)(.*)$ /$1$3 [r=301,L] # codeigniter direct RewriteCond $0 !^(index\.php|assets|robots\.txt|sitemap\.xml|favicon\.ico) RewriteRule ^.*$ index.php [L] </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> Default-ssl File <IfModule mod_ssl.c> <VirtualHost _default_:443> ServerAdmin webmaster@localhost ServerName mysite.com DocumentRoot /var/www <Directory /> Options +FollowSymLinks AllowOverride None </Directory> <Directory /var/www> Options -Indexes +FollowSymLinks -MultiViews AllowOverride None Order allow,deny allow from all RewriteEngine On RewriteBase / RewriteCond %{SERVER_PORT} !^443 RewriteRule ^ https://mysite.com%{REQUEST_URI} [R=301,L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.+)\.(\d+)\.(js|css|png|jpg|gif)$ $1.$3 [L] # index.php remove any index.php parts RewriteCond %{THE_REQUEST} /index\.(php|html) RewriteRule (.*)index\.(php|html)(.*)$ /$1$3 [r=301,L] # codeigniter direct RewriteCond $0 !^(index\.php|assets|robots\.txt|sitemap\.xml|favicon\.ico) RewriteRule ^.*$ index.php [L] </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/ssl_access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> # SSL Engine Switch: # Enable/Disable SSL for this virtual host. SSLEngine on # Use our self-signed certificate by default SSLCertificateFile /etc/apache2/ssl/certs/www.mysite.com.crt SSLCertificateKeyFile /etc/apache2/ssl/private/www.mysite.com.key # A self-signed (snakeoil) certificate can be created by installing # the ssl-cert package. See # /usr/share/doc/apache2.2-common/README.Debian.gz for more info. # If both key and certificate are stored in the same file, only the # SSLCertificateFile directive is needed. # SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem # SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key # Server Certificate Chain: # Point SSLCertificateChainFile at a file containing the # concatenation of PEM encoded CA certificates which form the # certificate chain for the server certificate. Alternatively # the referenced file can be the same as SSLCertificateFile # when the CA certificates are directly appended to the server # certificate for convinience. #SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt # Certificate Authority (CA): # Set the CA certificate verification path where to find CA # certificates for client authentication or alternatively one # huge file containing all of them (file must be PEM encoded) # Note: Inside SSLCACertificatePath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCACertificatePath /etc/ssl/certs/ #SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt # Certificate Revocation Lists (CRL): # Set the CA revocation path where to find CA CRLs for client # authentication or alternatively one huge file containing all # of them (file must be PEM encoded) # Note: Inside SSLCARevocationPath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCARevocationPath /etc/apache2/ssl.crl/ #SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl # Client Authentication (Type): # Client certificate verification type and depth. Types are # none, optional, require and optional_no_ca. Depth is a # number which specifies how deeply to verify the certificate # issuer chain before deciding the certificate is not valid. #SSLVerifyClient require #SSLVerifyDepth 10 # Access Control: # With SSLRequire you can do per-directory access control based # on arbitrary complex boolean expressions containing server # variable checks and other lookup directives. The syntax is a # mixture between C and Perl. See the mod_ssl documentation # for more details. #<Location /> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ #</Location> # SSL Engine Options: # Set various options for the SSL engine. # o FakeBasicAuth: # Translate the client X.509 into a Basic Authorisation. This means that # the standard Auth/DBMAuth methods can be used for access control. The # user name is the `one line' version of the client's X.509 certificate. # Note that no password is obtained from the user. Every entry in the user # file needs this password: `xxj31ZMTZzkVA'. # o ExportCertData: # This exports two additional environment variables: SSL_CLIENT_CERT and # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the # server (always existing) and the client (only existing when client # authentication is used). This can be used to import the certificates # into CGI scripts. # o StdEnvVars: # This exports the standard SSL/TLS related `SSL_*' environment variables. # Per default this exportation is switched off for performance reasons, # because the extraction step is an expensive operation and is usually # useless for serving static content. So one usually enables the # exportation for CGI and SSI requests only. # o StrictRequire: # This denies access when "SSLRequireSSL" or "SSLRequire" applied even # under a "Satisfy any" situation, i.e. when it applies access is denied # and no other module can change it. # o OptRenegotiate: # This enables optimized SSL connection renegotiation handling when SSL # directives are used in per-directory context. #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire <FilesMatch "\.(cgi|shtml|phtml|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory /usr/lib/cgi-bin> SSLOptions +StdEnvVars </Directory> # SSL Protocol Adjustments: # The safe and default but still SSL/TLS standard compliant shutdown # approach is that mod_ssl sends the close notify alert but doesn't wait for # the close notify alert from client. When you need a different shutdown # approach you can use one of the following variables: # o ssl-unclean-shutdown: # This forces an unclean shutdown when the connection is closed, i.e. no # SSL close notify alert is send or allowed to received. This violates # the SSL/TLS standard but is needed for some brain-dead browsers. Use # this when you receive I/O errors because of the standard approach where # mod_ssl sends the close notify alert. # o ssl-accurate-shutdown: # This forces an accurate shutdown when the connection is closed, i.e. a # SSL close notify alert is send and mod_ssl waits for the close notify # alert of the client. This is 100% SSL/TLS standard compliant, but in # practice often causes hanging connections with brain-dead browsers. Use # this only for browsers where you know that their SSL implementation # works correctly. # Notice: Most problems of broken clients are also related to the HTTP # keep-alive facility, so you usually additionally want to disable # keep-alive for those clients, too. Use variable "nokeepalive" for this. # Similarly, one has to force some clients to use HTTP/1.0 to workaround # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and # "force-response-1.0" for this. BrowserMatch "MSIE [2-6]" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 # MSIE 7 and newer should be able to use keepalive BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown httpd.conf File Just a lot of stuff from html5 boiler plate, I will post it if need be Old htaccess file <IfModule mod_rewrite.c> # index.php remove any index.php parts RewriteCond %{THE_REQUEST} /index\.(php|html) RewriteRule (.*)index\.(php|html)(.*)$ /$1$3 [r=301,L] RewriteCond $1 !^(index\.php|assets|robots\.txt|sitemap\.xml|favicon\.ico) RewriteRule ^(.*)/$ /$1 [r=301,L] # codeigniter direct RewriteCond $1 !^(index\.php|assets|robots\.txt|sitemap\.xml|favicon\.ico) RewriteRule ^(.*)$ /index.php/$1 [L] </IfModule> Any Help would be hugely appreciated!!

    Read the article

  • OpenVPN Client timing out

    - by Austin
    I recently installed OpenVPN on my Ubuntu VPS. Whenenver I try to connect to it, I can establish a connection just fine. However, everything I try to connect to times out. If I try to ping something, it will resolve the IP, but will time out after resolving the IP. (So DNS Server seems to be working correctly) My server.conf has this relevant information (At least I think it's relevant. I'm not sure if you need more or not) # Which local IP address should OpenVPN # listen on? (optional) ;local a.b.c.d # Which TCP/UDP port should OpenVPN listen on? # If you want to run multiple OpenVPN instances # on the same machine, use a different port # number for each one. You will need to # open up this port on your firewall. port 1194 # TCP or UDP server? ;proto tcp proto udp # "dev tun" will create a routed IP tunnel, # "dev tap" will create an ethernet tunnel. # Use "dev tap0" if you are ethernet bridging # and have precreated a tap0 virtual interface # and bridged it with your ethernet interface. # If you want to control access policies # over the VPN, you must create firewall # rules for the the TUN/TAP interface. # On non-Windows systems, you can give # an explicit unit number, such as tun0. # On Windows, use "dev-node" for this. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel if you # have more than one. On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file. The server and all clients will # use the same ca file. # # See the "easy-rsa" directory for a series # of scripts for generating RSA certificates # and private keys. Remember to use # a unique Common Name for the server # and each of the client certificates. # # Any X509 key management system can be used. # OpenVPN can also use a PKCS #12 formatted key file # (see "pkcs12" directive in man page). ca ca.crt cert server.crt key server.key # This file should be kept secret # Diffie hellman parameters. # Generate your own with: # openssl dhparam -out dh1024.pem 1024 # Substitute 2048 for 1024 if you are using # 2048 bit keys. dh dh1024.pem # Configure server mode and supply a VPN subnet # for OpenVPN to draw client addresses from. # The server will take 10.8.0.1 for itself, # the rest will be made available to clients. # Each client will be able to reach the server # on 10.8.0.1. Comment this line out if you are # ethernet bridging. See the man page for more info. server 10.8.0.0 255.255.255.0 # Maintain a record of client <-> virtual IP address # associations in this file. If OpenVPN goes down or # is restarted, reconnecting clients can be assigned # the same virtual IP address from the pool that was # previously assigned. ifconfig-pool-persist ipp.txt # Configure server mode for ethernet bridging. # You must first use your OS's bridging capability # to bridge the TAP interface with the ethernet # NIC interface. Then you must manually set the # IP/netmask on the bridge interface, here we # assume 10.8.0.4/255.255.255.0. Finally we # must set aside an IP range in this subnet # (start=10.8.0.50 end=10.8.0.100) to allocate # to connecting clients. Leave this line commented # out unless you are ethernet bridging. ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 # Configure server mode for ethernet bridging # using a DHCP-proxy, where clients talk # to the OpenVPN server-side DHCP server # to receive their IP address allocation # and DNS server addresses. You must first use # your OS's bridging capability to bridge the TAP # interface with the ethernet NIC interface. # Note: this mode only works on clients (such as # Windows), where the client-side TAP adapter is # bound to a DHCP client. ;server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. ;push "route 192.168.10.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" # To assign specific IP addresses to specific # clients or if a connecting client has a private # subnet behind it that should also have VPN access, # use the subdirectory "ccd" for client-specific # configuration files (see man page for more info). # EXAMPLE: Suppose the client # having the certificate common name "Thelonious" # also has a small subnet behind his connecting # machine, such as 192.168.40.128/255.255.255.248. # First, uncomment out these lines: ;client-config-dir ccd ;route 192.168.40.128 255.255.255.248 # Then create a file ccd/Thelonious with this line: # iroute 192.168.40.128 255.255.255.248 # This will allow Thelonious' private subnet to # access the VPN. This example will only work # if you are routing, not bridging, i.e. you are # using "dev tun" and "server" directives. # EXAMPLE: Suppose you want to give # Thelonious a fixed VPN IP address of 10.9.0.1. # First uncomment out these lines: ;client-config-dir ccd ;route 10.9.0.0 255.255.255.252 # Then add this line to ccd/Thelonious: # ifconfig-push 10.9.0.1 10.9.0.2 # Suppose that you want to enable different # firewall access policies for different groups # of clients. There are two methods: # (1) Run multiple OpenVPN daemons, one for each # group, and firewall the TUN/TAP interface # for each group/daemon appropriately. # (2) (Advanced) Create a script to dynamically # modify the firewall in response to access # from different clients. See man # page for more info on learn-address script. ;learn-address ./script # If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 8.8.8.8" # Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. ;push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" # Uncomment this directive to allow different # clients to be able to "see" each other. # By default, clients will only see the server. # To force clients to only see the server, you # will also need to appropriately firewall the # server's TUN/TAP interface. ;client-to-client # Uncomment this directive if multiple clients # might connect with the same certificate/key # files or common names. This is recommended # only for testing purposes. For production use, # each client should have its own certificate/key # pair. # # IF YOU HAVE NOT GENERATED INDIVIDUAL # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, # EACH HAVING ITS OWN UNIQUE "COMMON NAME", # UNCOMMENT THIS LINE OUT. ;duplicate-cn # The keepalive directive causes ping-like # messages to be sent back and forth over # the link so that each side knows when # the other side has gone down. # Ping every 10 seconds, assume that remote # peer is down if no ping received during # a 120 second time period. keepalive 10 120 # For extra security beyond that provided # by SSL/TLS, create an "HMAC firewall" # to help block DoS attacks and UDP port flooding. # # Generate with: # openvpn --genkey --secret ta.key # # The server and each client must have # a copy of this key. # The second parameter should be '0' # on the server and '1' on the clients. ;tls-auth ta.key 0 # This file is secret # Select a cryptographic cipher. # This config item must be copied to # the client config file as well. ;cipher BF-CBC # Blowfish (default) ;cipher AES-128-CBC # AES ;cipher DES-EDE3-CBC # Triple-DES # Enable compression on the VPN link. # If you enable it here, you must also # enable it in the client config file. comp-lzo # The maximum number of concurrently connected # clients we want to allow. ;max-clients 100 # It's a good idea to reduce the OpenVPN # daemon's privileges after initialization. # # You can uncomment this out on # non-Windows systems. ;user nobody ;group nogroup # The persist options will try to avoid # accessing certain resources on restart # that may no longer be accessible because # of the privilege downgrade. persist-key persist-tun # Output a short status file showing # current connections, truncated # and rewritten every minute. status openvpn-status.log # By default, log messages will go to the syslog (or # on Windows, if running as a service, they will go to # the "\Program Files\OpenVPN\log" directory). # Use log or log-append to override this default. # "log" will truncate the log file on OpenVPN startup, # while "log-append" will append to it. Use one # or the other (but not both). ;log openvpn.log ;log-append openvpn.log # Set the appropriate level of log # file verbosity. # # 0 is silent, except for fatal errors # 4 is reasonable for general usage # 5 and 6 can help to debug connection problems # 9 is extremely verbose verb 3 # Silence repeating messages. At most 20 # sequential messages of the same message # category will be output to the log. ;mute 20 I've tried on multiple computers by the way. The same result on all of them. What could be wrong? Thanks in advance, and if you need other information I'll gladly post it. Information for new comments root@vps:~# iptables -L -n -v Chain INPUT (policy ACCEPT 862K packets, 51M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 3 packets, 382 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 4641 298K ACCEPT all -- * * 10.8.0.0/24 0.0.0.0/0 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 1671K packets, 2378M bytes) pkts bytes target prot opt in out source destination And root@vps:~# iptables -t nat -L -n -v Chain PREROUTING (policy ACCEPT 17937 packets, 2013K bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 8975 packets, 562K bytes) pkts bytes target prot opt in out source destination 1579 103K SNAT all -- * * 10.8.0.0/24 0.0.0.0/0 to:SERVERIP Chain OUTPUT (policy ACCEPT 8972 packets, 562K bytes) pkts bytes target prot opt in out source destination

    Read the article

  • How does Windows 7 DNS client work?

    - by Mark Allison
    I am using a local DHCP and DNS server on my home network on a linux machine. It is running CentOS 6.3 with dnsmasq 2.48. It's all working fine except for local DNS lookups for Windows machines only. I have a mix of Ubuntu, CentOS and Windows machines on the network, some virtual, some physical. I have a machine called boron and the domain is called localdomain If I ping boron from any linux machine, I get [root@lithium lists]# ping -c3 boron PING boron.localdomain (10.0.0.5) 56(84) bytes of data. 64 bytes from boron.localdomain (10.0.0.5): icmp_seq=1 ttl=64 time=0.740 ms 64 bytes from boron.localdomain (10.0.0.5): icmp_seq=2 ttl=64 time=0.478 ms 64 bytes from boron.localdomain (10.0.0.5): icmp_seq=3 ttl=64 time=0.458 ms --- boron.localdomain ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2000ms rtt min/avg/max/mdev = 0.458/0.558/0.740/0.131 ms If I do it from my Windows 7 machine, I get: Ping request could not find host boron. Please check the name and try again. If I try ping boron.localdomain I get: Pinging boron.localdomain [67.215.65.132] with 32 bytes of data: Reply from 67.215.65.132: bytes=32 time=16ms TTL=57 Reply from 67.215.65.132: bytes=32 time=188ms TTL=57 Reply from 67.215.65.132: bytes=32 time=15ms TTL=57 Reply from 67.215.65.132: bytes=32 time=14ms TTL=57 Ping statistics for 67.215.65.132: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 14ms, Maximum = 188ms, Average = 58ms which is clearly wrong. Why is it going out to the internet? Why can't my windows machine resolve the boron hostname to a FQDN? My Windows machines and linux machines get their network config from DHCP. UPDATE If I do ipconfig /all in Windows, it looks as I would expect: Windows IP Configuration Host Name . . . . . . . . . . . . : lanthanum Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : .localdomain Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : .localdomain Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 50-E5-49-38-FC-A2 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 10.0.0.57(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 23 August 2012 13:58:45 Lease Expires . . . . . . . . . . : 24 August 2012 07:58:48 Default Gateway . . . . . . . . . : 10.0.0.6 DHCP Server . . . . . . . . . . . : 10.0.0.6 DNS Servers . . . . . . . . . . . : 10.0.0.6 208.67.222.222 208.67.220.220 NetBIOS over Tcpip. . . . . . . . : Enabled When I do an nslookup I get: Server: carbon.localdomain Address: 10.0.0.6 *** carbon.localdomain can't find boron: Unspecified error However if I do ifconfig -a in Linux I get: [root@nitrogen ~]# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:0C:29:AF:EC:2A inet addr:10.0.0.7 Bcast:10.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:187687 errors:0 dropped:0 overruns:0 frame:0 TX packets:5857 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:23910700 (22.8 MiB) TX bytes:712964 (696.2 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:329894 errors:0 dropped:0 overruns:0 frame:0 TX packets:329894 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:67153143 (64.0 MiB) TX bytes:67153143 (64.0 MiB) and nslookup: [root@nitrogen ~]# nslookup boron Server: 10.0.0.6 Address: 10.0.0.6#53 Name: boron Address: 10.0.0.5 Both machines are on the same network using the same DHCP server. UPDATE 2 I thought the issue was resolved but I am getting intermittent DNS resolving issues but only on my Windows 7 machine. All my linux boxes are fine. This is what happens when I ping and nslookup from Windows to a Windows 2008 Server: C:\Users\mark>nslookup magnesium Server: carbon.localdomain Address: 10.0.0.6 Name: magnesium.localdomain Address: 10.0.0.12 C:\Users\mark>ping magnesium Pinging magnesium.localdomain [67.215.65.132] with 32 bytes of data: Reply from 67.215.65.132: bytes=32 time=267ms TTL=57 Reply from 67.215.65.132: bytes=32 time=162ms TTL=57 Reply from 67.215.65.132: bytes=32 time=510ms TTL=57 Reply from 67.215.65.132: bytes=32 time=146ms TTL=57 Ping statistics for 67.215.65.132: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 146ms, Maximum = 510ms, Average = 271ms And from Linux: [root@beryllium ~]# ping -c4 magnesium PING magnesium.localdomain (10.0.0.12) 56(84) bytes of data. 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=1 ttl=128 time=0.176 ms 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=2 ttl=128 time=0.634 ms 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=3 ttl=128 time=0.685 ms 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=4 ttl=128 time=0.263 ms --- magnesium.localdomain ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3002ms rtt min/avg/max/mdev = 0.176/0.439/0.685/0.223 ms [root@beryllium ~]# nslookup magnesium Server: 10.0.0.6 Address: 10.0.0.6#53 Name: magnesium.localdomain Address: 10.0.0.12 UPDATE 3 I stopped the Windows DNS client on my Windows 7 machine with net stop dnscache and it is now working fine. It would be nice to get DNS working with the DNS client on, but I might be OK without it, what do you think?

    Read the article

  • Applying ServiceKnownTypeAttribute to WCF service with Spring

    - by avidgoffer
    I am trying to apply the ServiceKnownTypeAttribute to my WCF Service but keep getting the error below my config. Does anyone have any ideas? <object id="HHGEstimating" type="Spring.ServiceModel.ServiceExporter, Spring.Services"> <property name="TargetName" value="HHGEstimatingHelper"/> <property name="Name" value="HHGEstimating"/> <property name="Namespace" value="http://www.igcsoftware.com/HHGEstimating"/> <property name="TypeAttributes"> <list> <ref local="wcfErrorBehavior"/> <ref local="wcfSilverlightFaultBehavior"/> <object type="System.ServiceModel.ServiceKnownTypeAttribute, System.ServiceModel"> <constructor-arg name="type" value="IGCSoftware.HHG.Business.UserControl.AtlasUser, IGCSoftware.HHG.Business"/> </object> </list> </property> Error thrown by a dependency of object 'HHGEstimating' defined in 'assembly [IGCSoftware.HHG.WebService, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [IGCSoftware.HHG.WebService.Resources.Spring.objects.xml] line 46' : '1' constructor arguments specified but no matching constructor found in object 'System.ServiceModel.ServiceKnownTypeAttribute#25A5628' (hint: specify argument indexes, names, or types to avoid ambiguities). while resolving 'TypeAttributes[2]' to 'System.ServiceModel.ServiceKnownTypeAttribute#25A5628' defined in 'assembly [IGCSoftware.HHG.WebService, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [IGCSoftware.HHG.WebService.Resources.Spring.objects.xml] line 46' Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: Spring.Objects.Factory.ObjectCreationException: Error thrown by a dependency of object 'HHGEstimating' defined in 'assembly [IGCSoftware.HHG.WebService, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [IGCSoftware.HHG.WebService.Resources.Spring.objects.xml] line 46' : '1' constructor arguments specified but no matching constructor found in object 'System.ServiceModel.ServiceKnownTypeAttribute#25A5628' (hint: specify argument indexes, names, or types to avoid ambiguities). while resolving 'TypeAttributes[2]' to 'System.ServiceModel.ServiceKnownTypeAttribute#25A5628' defined in 'assembly [IGCSoftware.HHG.WebService, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [IGCSoftware.HHG.WebService.Resources.Spring.objects.xml] line 46' Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [ObjectCreationException: Error thrown by a dependency of object 'HHGEstimating' defined in 'assembly [IGCSoftware.HHG.WebService, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [IGCSoftware.HHG.WebService.Resources.Spring.objects.xml] line 46' : '1' constructor arguments specified but no matching constructor found in object 'System.ServiceModel.ServiceKnownTypeAttribute#25A5628' (hint: specify argument indexes, names, or types to avoid ambiguities). while resolving 'TypeAttributes[2]' to 'System.ServiceModel.ServiceKnownTypeAttribute#25A5628' defined in 'assembly [IGCSoftware.HHG.WebService, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [IGCSoftware.HHG.WebService.Resources.Spring.objects.xml] line 46'] Spring.Objects.Factory.Support.ObjectDefinitionValueResolver.ResolveInnerObjectDefinition(String name, String innerObjectName, String argumentName, IObjectDefinition definition, Boolean singletonOwner) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\ObjectDefinitionValueResolver.cs:300 Spring.Objects.Factory.Support.ObjectDefinitionValueResolver.ResolvePropertyValue(String name, IObjectDefinition definition, String argumentName, Object argumentValue) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\ObjectDefinitionValueResolver.cs:150 Spring.Objects.Factory.Support.ObjectDefinitionValueResolver.ResolveValueIfNecessary(String name, IObjectDefinition definition, String argumentName, Object argumentValue) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\ObjectDefinitionValueResolver.cs:112 Spring.Objects.Factory.Config.ManagedList.Resolve(String objectName, IObjectDefinition definition, String propertyName, ManagedCollectionElementResolver resolver) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Config\ManagedList.cs:126 Spring.Objects.Factory.Support.ObjectDefinitionValueResolver.ResolvePropertyValue(String name, IObjectDefinition definition, String argumentName, Object argumentValue) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\ObjectDefinitionValueResolver.cs:201 Spring.Objects.Factory.Support.ObjectDefinitionValueResolver.ResolveValueIfNecessary(String name, IObjectDefinition definition, String argumentName, Object argumentValue) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\ObjectDefinitionValueResolver.cs:112 Spring.Objects.Factory.Support.AbstractAutowireCapableObjectFactory.ApplyPropertyValues(String name, RootObjectDefinition definition, IObjectWrapper wrapper, IPropertyValues properties) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\AbstractAutowireCapableObjectFactory.cs:373 Spring.Objects.Factory.Support.AbstractAutowireCapableObjectFactory.PopulateObject(String name, RootObjectDefinition definition, IObjectWrapper wrapper) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\AbstractAutowireCapableObjectFactory.cs:563 Spring.Objects.Factory.Support.AbstractAutowireCapableObjectFactory.ConfigureObject(String name, RootObjectDefinition definition, IObjectWrapper wrapper) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\AbstractAutowireCapableObjectFactory.cs:1844 Spring.Objects.Factory.Support.AbstractAutowireCapableObjectFactory.InstantiateObject(String name, RootObjectDefinition definition, Object[] arguments, Boolean allowEagerCaching, Boolean suppressConfigure) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\AbstractAutowireCapableObjectFactory.cs:918 Spring.Objects.Factory.Support.AbstractObjectFactory.CreateAndCacheSingletonInstance(String objectName, RootObjectDefinition objectDefinition, Object[] arguments) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\AbstractObjectFactory.cs:2120 Spring.Objects.Factory.Support.AbstractObjectFactory.GetObjectInternal(String name, Type requiredType, Object[] arguments, Boolean suppressConfigure) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\AbstractObjectFactory.cs:2046 Spring.Objects.Factory.Support.DefaultListableObjectFactory.PreInstantiateSingletons() in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\DefaultListableObjectFactory.cs:505 Spring.Context.Support.AbstractApplicationContext.Refresh() in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Context\Support\AbstractApplicationContext.cs:911 _dynamic_Spring.Context.Support.XmlApplicationContext..ctor(Object[] ) +197 Spring.Reflection.Dynamic.SafeConstructor.Invoke(Object[] arguments) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Reflection\Dynamic\DynamicConstructor.cs:116 Spring.Context.Support.RootContextInstantiator.InvokeContextConstructor(ConstructorInfo ctor) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Context\Support\ContextHandler.cs:550 Spring.Context.Support.ContextInstantiator.InstantiateContext() in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Context\Support\ContextHandler.cs:494 Spring.Context.Support.ContextHandler.InstantiateContext(IApplicationContext parentContext, Object configContext, String contextName, Type contextType, Boolean caseSensitive, String[] resources) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Context\Support\ContextHandler.cs:330 Spring.Context.Support.ContextHandler.Create(Object parent, Object configContext, XmlNode section) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Context\Support\ContextHandler.cs:280 [ConfigurationErrorsException: Error creating context 'spring.root': Error thrown by a dependency of object 'HHGEstimating' defined in 'assembly [IGCSoftware.HHG.WebService, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [IGCSoftware.HHG.WebService.Resources.Spring.objects.xml] line 46' : '1' constructor arguments specified but no matching constructor found in object 'System.ServiceModel.ServiceKnownTypeAttribute#25A5628' (hint: specify argument indexes, names, or types to avoid ambiguities). while resolving 'TypeAttributes[2]' to 'System.ServiceModel.ServiceKnownTypeAttribute#25A5628' defined in 'assembly [IGCSoftware.HHG.WebService, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [IGCSoftware.HHG.WebService.Resources.Spring.objects.xml] line 46'] System.Configuration.BaseConfigurationRecord.EvaluateOne(String[] keys, SectionInput input, Boolean isTrusted, FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult) +202 System.Configuration.BaseConfigurationRecord.Evaluate(FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult, Boolean getLkg, Boolean getRuntimeObject, Object& result, Object& resultRuntimeObject) +1061 System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject) +1431 System.Configuration.BaseConfigurationRecord.GetSection(String configKey, Boolean getLkg, Boolean checkPermission) +56 System.Configuration.BaseConfigurationRecord.GetSection(String configKey) +8 System.Web.Configuration.HttpConfigurationSystem.GetApplicationSection(String sectionName) +45 System.Web.Configuration.HttpConfigurationSystem.GetSection(String sectionName) +49 System.Web.Configuration.HttpConfigurationSystem.System.Configuration.Internal.IInternalConfigSystem.GetSection(String configKey) +6 System.Configuration.ConfigurationManager.GetSection(String sectionName) +78 Spring.Util.ConfigurationUtils.GetSection(String sectionName) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Util\ConfigurationUtils.cs:69 Spring.Context.Support.ContextRegistry.InitializeContextIfNeeded() in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Context\Support\ContextRegistry.cs:340 Spring.Context.Support.ContextRegistry.GetContext() in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Context\Support\ContextRegistry.cs:206 Spring.ServiceModel.Activation.ServiceHostFactory.CreateServiceHost(String reference, Uri[] baseAddresses) in l:\projects\spring-net\trunk\src\Spring\Spring.Services\ServiceModel\Activation\ServiceHostFactory.cs:66 System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +11687036 System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +42 System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +479 [ServiceActivationException: The service '/HHGEstimating.svc' cannot be activated due to an exception during compilation. The exception message is: Error creating context 'spring.root': Error thrown by a dependency of object 'HHGEstimating' defined in 'assembly [IGCSoftware.HHG.WebService, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [IGCSoftware.HHG.WebService.Resources.Spring.objects.xml] line 46' : '1' constructor arguments specified but no matching constructor found in object 'System.ServiceModel.ServiceKnownTypeAttribute#25A5628' (hint: specify argument indexes, names, or types to avoid ambiguities). while resolving 'TypeAttributes[2]' to 'System.ServiceModel.ServiceKnownTypeAttribute#25A5628' defined in 'assembly [IGCSoftware.HHG.WebService, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [IGCSoftware.HHG.WebService.Resources.Spring.objects.xml] line 46'.] System.ServiceModel.AsyncResult.End(IAsyncResult result) +11592858 System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +194 System.ServiceModel.Activation.HostedHttpRequestAsyncResult.ExecuteSynchronous(HttpApplication context, Boolean flowContext) +176 System.ServiceModel.Activation.HttpModule.ProcessRequest(Object sender, EventArgs e) +275 System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +68 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +75

    Read the article

  • War deployment error related to classloading

    - by user563564
    hello when i am deploying my war file and run it it will give error like org.springframework.instrument.classloading.tomcat.TomcatInstrumentableClassLoader Jan 6, 2011 3:16:04 PM org.apache.catalina.startup.HostConfig deployDescriptor INFO: Deploying configuration descriptor servlet.xml Jan 6, 2011 3:16:04 PM org.apache.catalina.core.StandardContext preDeregister SEVERE: error stopping LifecycleException: Pipeline has not been started at org.apache.catalina.core.StandardPipeline.stop(StandardPipeline.java:257) at org.apache.catalina.core.StandardContext.stop(StandardContext.java:4629) at org.apache.catalina.core.StandardContext.preDeregister(StandardContext.java:5370) at org.apache.tomcat.util.modeler.BaseModelMBean.preDeregister(BaseModelMBean.java:1130) at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.preDeregisterInvoke(DefaultMBeanServerInterceptor.java:1048) at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.exclusiveUnregisterMBean(DefaultMBeanServerInterceptor.java:421) at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.unregisterMBean(DefaultMBeanServerInterceptor.java:403) at com.sun.jmx.mbeanserver.JmxMBeanServer.unregisterMBean(JmxMBeanServer.java:506) at org.apache.tomcat.util.modeler.Registry.unregisterComponent(Registry.java:575) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230) at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:791) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:771) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:546) at org.apache.catalina.startup.HostConfig.deployDescriptor(HostConfig.java:637) at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:521) at org.apache.catalina.startup.HostConfig.check(HostConfig.java:1359) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.tomcat.util.modeler.BaseModelMBean.invoke(BaseModelMBean.java:297) at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:836) at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761) at org.apache.catalina.manager.ManagerServlet.check(ManagerServlet.java:1500) at org.apache.catalina.manager.ManagerServlet.deploy(ManagerServlet.java:849) at org.apache.catalina.manager.ManagerServlet.doGet(ManagerServlet.java:351) at javax.servlet.http.HttpServlet.service(HttpServlet.java:617) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:199) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:558) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298) at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:859) at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:579) at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1555) at java.lang.Thread.run(Thread.java:619) Jan 6, 2011 3:16:05 PM org.apache.catalina.loader.WebappLoader start SEVERE: LifecycleException java.lang.ClassNotFoundException: org.springframework.instrument.classloading.tomcat.TomcatInstrumentableClassLoader at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at java.lang.ClassLoader.loadClass(ClassLoader.java:251) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:169) at org.apache.catalina.loader.WebappLoader.createClassLoader(WebappLoader.java:773) at org.apache.catalina.loader.WebappLoader.start(WebappLoader.java:638) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4341) at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:791) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:771) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:546) at org.apache.catalina.startup.HostConfig.deployDescriptor(HostConfig.java:637) at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:521) at org.apache.catalina.startup.HostConfig.check(HostConfig.java:1359) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.tomcat.util.modeler.BaseModelMBean.invoke(BaseModelMBean.java:297) at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:836) at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761) at org.apache.catalina.manager.ManagerServlet.check(ManagerServlet.java:1500) at org.apache.catalina.manager.ManagerServlet.deploy(ManagerServlet.java:849) at org.apache.catalina.manager.ManagerServlet.doGet(ManagerServlet.java:351) at javax.servlet.http.HttpServlet.service(HttpServlet.java:617) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:199) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:558) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298) at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:859) at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:579) at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1555) at java.lang.Thread.run(Thread.java:619) Jan 6, 2011 3:16:05 PM org.apache.catalina.core.ContainerBase addChildInternal SEVERE: ContainerBase.addChild: start: LifecycleException: start: : java.lang.ClassNotFoundException: org.springframework.instrument.classloading.tomcat.TomcatInstrumentableClassLoader at org.apache.catalina.loader.WebappLoader.start(WebappLoader.java:679) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4341) at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:791) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:771) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:546) at org.apache.catalina.startup.HostConfig.deployDescriptor(HostConfig.java:637) at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:521) at org.apache.catalina.startup.HostConfig.check(HostConfig.java:1359) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.tomcat.util.modeler.BaseModelMBean.invoke(BaseModelMBean.java:297) at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:836) at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761) at org.apache.catalina.manager.ManagerServlet.check(ManagerServlet.java:1500) at org.apache.catalina.manager.ManagerServlet.deploy(ManagerServlet.java:849) at org.apache.catalina.manager.ManagerServlet.doGet(ManagerServlet.java:351) at javax.servlet.http.HttpServlet.service(HttpServlet.java:617) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:199) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:558) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298) at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:859) at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:579) at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1555) at java.lang.Thread.run(Thread.java:619) Jan 6, 2011 3:16:05 PM org.apache.catalina.startup.HostConfig deployDescriptor SEVERE: Error deploying configuration descriptor servlet.xml java.lang.IllegalStateException: ContainerBase.addChild: start: LifecycleException: start: : java.lang.ClassNotFoundException: org.springframework.instrument.classloading.tomcat.TomcatInstrumentableClassLoader at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:795) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:771) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:546) at org.apache.catalina.startup.HostConfig.deployDescriptor(HostConfig.java:637) at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:521) at org.apache.catalina.startup.HostConfig.check(HostConfig.java:1359) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.tomcat.util.modeler.BaseModelMBean.invoke(BaseModelMBean.java:297) at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:836) at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761) at org.apache.catalina.manager.ManagerServlet.check(ManagerServlet.java:1500) at org.apache.catalina.manager.ManagerServlet.deploy(ManagerServlet.java:849) at org.apache.catalina.manager.ManagerServlet.doGet(ManagerServlet.java:351) at javax.servlet.http.HttpServlet.service(HttpServlet.java:617) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:199) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:558) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298) at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:859) at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:579) at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1555) at java.lang.Thread.run(Thread.java:619) context.xml file -- <?xml version="1.0" encoding="UTF-8"?> <Context antiJARLocking="true" path="servlet"> <Loader loaderClass="org.springframework.instrument.classloading.tomcat.TomcatInstrumentableClassLoader"/> </Context> FAIL - Failed to deploy application at context path /servlet so how can i resolve it

    Read the article

  • Android 1.5 Gridview Problem

    - by flybirdtt
    I used a gridview in this app. When i run it at Verison 1.6 or newer, it's OK. But i can not get this gridview in 1.5. I always show this info and exception: Unable to resolve drawable "com.android.layoutlib.utils.DensityBasedResourceValue@397660" in attribute "listSelector" org.xmlpull.v1.XmlPullParserException: Binary XML file line #3: tag requires a 'drawable' attribute or child tag defining a drawable at android.graphics.drawable.StateListDrawable.inflate(StateListDrawable.java:151) at android.graphics.drawable.Drawable.createFromXmlInner(Drawable.java:779) at android.graphics.drawable.Drawable.createFromXml(Drawable.java:720) at com.android.layoutlib.bridge.ResourceHelper.getDrawable(ResourceHelper.java:150) at com.android.layoutlib.bridge.BridgeTypedArray.getDrawable(BridgeTypedArray.java:668) at android.widget.AbsListView.(AbsListView.java:514) at android.widget.GridView.(GridView.java:69) at android.widget.GridView.(GridView.java:65) at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at android.view.LayoutInflater.createView(LayoutInflater.java:499) at android.view.BridgeInflater.onCreateView(BridgeInflater.java:77) at android.view.LayoutInflater.createViewFromTag(LayoutInflater.java:562) at android.view.BridgeInflater.createViewFromTag(BridgeInflater.java:122) at android.view.LayoutInflater.rInflate(LayoutInflater.java:617) at android.view.LayoutInflater.rInflate(LayoutInflater.java:620) at android.view.LayoutInflater.inflate(LayoutInflater.java:407) at android.view.LayoutInflater.inflate(LayoutInflater.java:296) at com.android.layoutlib.bridge.Bridge.computeLayout(Bridge.java:377) at com.android.ide.eclipse.adt.internal.editors.layout.gle1.GraphicalLayoutEditor.computeLayout(Unknown Source) at com.android.ide.eclipse.adt.internal.editors.layout.gle1.GraphicalLayoutEditor.recomputeLayout(Unknown Source) at com.android.ide.eclipse.adt.internal.editors.layout.gle1.GraphicalLayoutEditor.activated(Unknown Source) at com.android.ide.eclipse.adt.internal.editors.layout.LayoutEditor.pageChange(Unknown Source) at org.eclipse.ui.part.MultiPageEditorPart.setActivePage(MultiPageEditorPart.java:1076) at org.eclipse.ui.forms.editor.FormEditor.setActivePage(FormEditor.java:601) at com.android.ide.eclipse.adt.internal.editors.AndroidEditor.selectDefaultPage(Unknown Source) at com.android.ide.eclipse.adt.internal.editors.AndroidEditor.addPages(Unknown Source) at org.eclipse.ui.forms.editor.FormEditor.createPages(FormEditor.java:138) at org.eclipse.ui.part.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:357) at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:662) at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:462) at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595) at org.eclipse.ui.internal.PartPane.setVisible(PartPane.java:313) at org.eclipse.ui.internal.presentations.PresentablePart.setVisible(PresentablePart.java:180) at org.eclipse.ui.internal.presentations.util.PresentablePartFolder.select(PresentablePartFolder.java:270) at org.eclipse.ui.internal.presentations.util.LeftToRightTabOrder.select(LeftToRightTabOrder.java:65) at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation.selectPart(TabbedStackPresentation.java:473) at org.eclipse.ui.internal.PartStack.refreshPresentationSelection(PartStack.java:1256) at org.eclipse.ui.internal.PartStack.setSelection(PartStack.java:1209) at org.eclipse.ui.internal.PartStack.showPart(PartStack.java:1608) at org.eclipse.ui.internal.PartStack.add(PartStack.java:499) at org.eclipse.ui.internal.EditorStack.add(EditorStack.java:103) at org.eclipse.ui.internal.PartStack.add(PartStack.java:485) at org.eclipse.ui.internal.EditorStack.add(EditorStack.java:112) at org.eclipse.ui.internal.EditorSashContainer.addEditor(EditorSashContainer.java:63) at org.eclipse.ui.internal.EditorAreaHelper.addToLayout(EditorAreaHelper.java:225) at org.eclipse.ui.internal.EditorAreaHelper.addEditor(EditorAreaHelper.java:213) at org.eclipse.ui.internal.EditorManager.createEditorTab(EditorManager.java:778) at org.eclipse.ui.internal.EditorManager.openEditorFromDescriptor(EditorManager.java:677) at org.eclipse.ui.internal.EditorManager.openEditor(EditorManager.java:638) at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2854) at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2762) at org.eclipse.ui.internal.WorkbenchPage.access$11(WorkbenchPage.java:2754) at org.eclipse.ui.internal.WorkbenchPage$10.run(WorkbenchPage.java:2705) at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70) at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2701) at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2685) at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2676) at org.eclipse.ui.ide.IDE.openEditor(IDE.java:651) at org.eclipse.ui.ide.IDE.openEditor(IDE.java:610) at org.eclipse.jdt.internal.ui.javaeditor.EditorUtility.openInEditor(EditorUtility.java:361) at org.eclipse.jdt.internal.ui.javaeditor.EditorUtility.openInEditor(EditorUtility.java:168) at org.eclipse.jdt.ui.actions.OpenAction.run(OpenAction.java:229) at org.eclipse.jdt.ui.actions.OpenAction.run(OpenAction.java:208) at org.eclipse.jdt.ui.actions.SelectionDispatchAction.dispatchRun(SelectionDispatchAction.java:274) at org.eclipse.jdt.ui.actions.SelectionDispatchAction.run(SelectionDispatchAction.java:250) at org.eclipse.jdt.internal.ui.packageview.PackageExplorerActionGroup.handleOpen(PackageExplorerActionGroup.java:373) at org.eclipse.jdt.internal.ui.packageview.PackageExplorerPart$4.open(PackageExplorerPart.java:526) at org.eclipse.ui.OpenAndLinkWithEditorHelper$InternalListener.open(OpenAndLinkWithEditorHelper.java:48) at org.eclipse.jface.viewers.StructuredViewer$2.run(StructuredViewer.java:842) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42) at org.eclipse.core.runtime.Platform.run(Platform.java:888) at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:48) at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175) at org.eclipse.jface.viewers.StructuredViewer.fireOpen(StructuredViewer.java:840) at org.eclipse.jface.viewers.StructuredViewer.handleOpen(StructuredViewer.java:1101) at org.eclipse.jface.viewers.StructuredViewer$6.handleOpen(StructuredViewer.java:1205) at org.eclipse.jface.util.OpenStrategy.fireOpenEvent(OpenStrategy.java:264) at org.eclipse.jface.util.OpenStrategy.access$2(OpenStrategy.java:258) at org.eclipse.jface.util.OpenStrategy$1.handleEvent(OpenStrategy.java:298) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3910) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3503) at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2405) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2369) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221) at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311) This is the layout xml: <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="fill_parent" android:background="@drawable/menu_background2"> <LinearLayout android:id="@+id/logopanel" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_alignParentTop="true" android:layout_marginTop="50dip" android:gravity="center" android:layout_marginBottom="10dip"> <ImageButton android:id="@+id/searchbar" android:layout_width="fill_parent" android:layout_height="wrap_content" android:background="@drawable/fake_search_bar"></ImageButton> </LinearLayout> <LinearLayout android:id="@+id/iconpanel" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_below="@+id/logopanel" android:layout_above="@+id/allbotpanel" android:layout_marginTop="10dip"> <GridView android:id="@+id/gridcontent" android:layout_width="fill_parent" android:layout_height="wrap_content" android:gravity="center" android:numColumns="3" android:layout_gravity="center" android:layout_centerInParent="true" android:background="@drawable/transparent_backgroud" android:listSelector="@drawable/gridviewselector"> </GridView> </LinearLayout> <RelativeLayout android:id="@+id/allbotpanel" android:layout_width="fill_parent" android:layout_height="75dip" android:background="@drawable/amex_bottom_bar" android:layout_alignParentBottom="true"> <LinearLayout android:id="@+id/noticebar" android:orientation="horizontal" android:layout_width="fill_parent" android:layout_height="29dip" android:layout_above="@+id/homebottombar"> <ImageButton android:id="@+id/infoicon" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_gravity="left|center_vertical" android:layout_marginLeft="10dip" android:background="@drawable/amex_info_button" android:src="@drawable/infoselector"></ImageButton> <TextView android:id="@+id/noticeicon" android:gravity="center" android:layout_gravity="right|center_vertical" android:layout_width="wrap_content" android:layout_height="25dip" android:layout_weight="1" android:clickable="true" android:focusable="true" android:text="@string/notice_string"></TextView> </LinearLayout> <LinearLayout android:id="@+id/homebottombar" android:orientation="horizontal" android:layout_width="fill_parent" android:layout_height="46dip" android:gravity="center" android:layout_alignParentBottom="true" android:background="@drawable/amex_bottom_bar" android:layout_marginBottom="3dip"></LinearLayout> </RelativeLayout> </RelativeLayout>

    Read the article

  • Why is my WCF Rest Service on IIS7 Authenticating TWICE!?!?

    - by TheAggie
    Ok, if someone could shed some light on this for me, I would greatly appreciate it. So here we go. I had a rest service running fine the other day but after I accidentally overwrote the web.config all hell broke loose. I've spent the past day and a half trying to sort things out but I can't seem to figure out what is missing or misplaced. So, I've designed this service around WCF Rest Contrib (http://wcfrestcontrib.codeplex.com)'s authentication process. Now, I can get this working fine on my localhost w/ the current web.config (minus the endpoint entry) but once I upload it to discountasp and select "basic authorization" in the ISS7 Manager, it appears that I'm getting authenticated twice! Once using my discount asp.net user/pass and then the next time using the application user/pass. Unfortunately I only provide one set of credentials and don't want to hard code my discountasp account info into the app. Like I said before, this worked fine a few days ago. Anyway. here is my web.config as it is now: <?xml version="1.0"?> <configuration> <connectionStrings> <add name="SQL2008_ConnectionString" connectionString="Data Source=sql2k8xx.discountasp.net;Initial Catalog=SQL2008_xx;Persist Security Info=True;User ID=SQL2008_xx_user;Password=myPass" providerName="System.Data.SqlClient" /> </connectionStrings> <system.web> <httpRuntime maxRequestLength="204800" executionTimeout="3600"/> <compilation debug="true"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </assemblies> </compilation> <httpModules> <add name="ServiceAnonymityModule" type="WcfRestContrib.Web.ServiceAnonymityModule, WcfRestContrib"/> </httpModules> </system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom> <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <remove name="ServiceAnonymityModule"/> <add name="ServiceAnonymityModule" type="WcfRestContrib.Web.ServiceAnonymityModule, WcfRestContrib"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> </handlers> </system.webServer> <system.diagnostics> <trace autoflush="true" /> </system.diagnostics> <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="false"> <baseAddressPrefixFilters> <add prefix="http://www.mydomain.com/myServiceBaseAddress"/> </baseAddressPrefixFilters> </serviceHostingEnvironment> <extensions> <behaviorExtensions> <add name="webAuthentication" type="WcfRestContrib.ServiceModel.Configuration.WebAuthentication.ConfigurationBehaviorElement, WcfRestContrib, Version=1.0.5.0, Culture=neutral, PublicKeyToken=89183999a8dc93b5"/> <add name="errorHandler" type="WcfRestContrib.ServiceModel.Configuration.ErrorHandler.BehaviorElement, WcfRestContrib, Version=1.0.5.0, Culture=neutral, PublicKeyToken=89183999a8dc93b5"/> <add name="webFormatter" type="WcfRestContrib.ServiceModel.Configuration.WebDispatchFormatter.ConfigurationBehaviorElement, WcfRestContrib, Version=1.0.5.0, Culture=neutral, PublicKeyToken=89183999a8dc93b5"/> <add name="webErrorHandler" type="WcfRestContrib.ServiceModel.Configuration.WebErrorHandler.ConfigurationBehaviorElement, WcfRestContrib, Version=1.0.5.0, Culture=neutral, PublicKeyToken=89183999a8dc93b5"/> </behaviorExtensions> </extensions> <bindings> <customBinding> <binding name="HttpStreamedRest"> <httpTransport maxReceivedMessageSize="209715200" manualAddressing="true" /> </binding> <binding name="HttpsStreamedRest"> <httpsTransport maxReceivedMessageSize="209715200" manualAddressing="true" /> </binding> </customBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="Rest"> <webAuthentication requireSecureTransport="false" authenticationHandlerType="WcfRestContrib.ServiceModel.Dispatcher.WebBasicAuthenticationHandler, WcfRestContrib" usernamePasswordValidatorType="MyLibrary.Runtime.SecurityValidator, MyLibrary" source="MyRESTServiceRealm"/> <webFormatter> <formatters defaultMimeType="application/xml"> <formatter mimeTypes="application/xml,text/xml" type="WcfRestContrib.ServiceModel.Dispatcher.Formatters.PoxDataContract, WcfRestContrib"/> <formatter mimeTypes="application/json" type="WcfRestContrib.ServiceModel.Dispatcher.Formatters.DataContractJson, WcfRestContrib"/> <formatter mimeTypes="application/x-www-form-urlencoded" type="WcfRestContrib.ServiceModel.Dispatcher.Formatters.FormUrlEncoded, WcfRestContrib"/> </formatters> </webFormatter> <errorHandler errorHandlerType="WcfRestContrib.ServiceModel.Web.WebErrorHandler, WcfRestContrib"/> <webErrorHandler returnRawException="true" logHandlerType="MyLibrary.Runtime.LogHandler, MyLibrary" unhandledErrorMessage="An error has occured processing your request. Please contact technical support for further assistance."/> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> </configuration> So, whenever I upload this and change the ISS setting to Basic Authentication, it looks like it is trying to use the default handler for authentication as if I try to enter my web app user/pass, I get an error screen which has the following detailed information about the moduel/handler Detailed Error Information Module: IIS Web Core Notification: AuthenticateRequest Handler: svc-ISAPI-2.0 Error Code: 0x80070005 Requested URL: http://www.mydomain.com:80/MyService.../MyService.svc Physical Path: E:\web\xxxxxx\htdocs\MyServiceBaseAddress\MyService.svc Logon Method: Not yet determined Logon User: Not yet determined Now for the fun stuff... i tried providing my discountasp.net account username/password for kicks and sure enough it responded properly for any [OperationContract] which doesn't have [OperationAuthentication] defined (which is only one or two of the operations I have). I thought this was strange, so I looked at fiddler and saw something interesting. Whenever I try request a procedure with [OperationAuthentication] defined and provide my discountasp.net username/pass I get two different "WWW-Authenticate" headers back in Fiddler: WWW-Authenticate: Basic realm="MyRESTServiceRealm" WWW-Authenticate: Basic realm="www.mydomain.com" On the other hand, if I try to access the same procedures with only my application's user/pass, I only get the site's header: WWW-Authenticate: Basic realm="www.mydomain.com" My hypothesis is that for some reason I'm having to pass through the default "Basic Authorization" layer set by IIS before I can get to the application's "Custom Basic Authorization" layer. After verifying this by created an identical user/pass for my service that I use for my discountasp.net account, I was able to successfully pass both layers of authentication without any issues... so I think I can conclude that this is indeed the issue. Now how do I disable the default one? Do I need to do this in the IIS Manager, or in the web.config? Anyway, I have absolutely no idea how this is possible or what I need to do to resolve the issue, but I know that something is seriously out of whack. Any suggestions would be greatly appreciated! Thanks.

    Read the article

  • Application throws NotSerializableException when run on an jboss cluster

    - by Kalpana
    Environment: JBoss 5.1.0, JBoss Seam 2.2.0 While trying to get my application running in a clustered environment after login I am getting the following exception. Post login we try to store the currentUser in jboss seam session context. java.io.NotSerializableException: org.jboss.seam.util.AnnotatedBeanProperty How to resolve this? java.io.NotSerializableException: org.jboss.seam.util.AnnotatedBeanProperty at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1156) at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java :1509) at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:14 74) at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.jav a:1392) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150) at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java :1509) at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:14 74) at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.jav a:1392) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150) at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:326) at java.util.ArrayList.writeObject(ArrayList.java:570) at sun.reflect.GeneratedMethodAccessor339.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces sorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:94 5) at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:14 61) at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.jav a:1392) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150) at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java :1509) at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:14 74) at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.jav a:1392) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150) at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:326) at java.util.HashMap.writeObject(HashMap.java:1001) at sun.reflect.GeneratedMethodAccessor338.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces sorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:94 5) at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:14 61) at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.jav a:1392) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150) at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:326) at org.jboss.ha.framework.server.SimpleCachableMarshalledValue.serialize (SimpleCachableMarshalledValue.java:271) at org.jboss.ha.framework.server.SimpleCachableMarshalledValue.writeExte rnal(SimpleCachableMarshalledValue.java:252) at java.io.ObjectOutputStream.writeExternalData(ObjectOutputStream.java: 1421) at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.jav a:1390) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150) at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:326) at org.jboss.cache.marshall.CacheMarshaller200.marshallObject(CacheMarsh aller200.java:460) at org.jboss.cache.marshall.CacheMarshaller300.marshallObject(CacheMarsh aller300.java:47) at org.jboss.cache.marshall.CacheMarshaller200.marshallMap(CacheMarshall er200.java:569) at org.jboss.cache.marshall.CacheMarshaller200.marshallObject(CacheMarsh aller200.java:370) at org.jboss.cache.marshall.CacheMarshaller300.marshallObject(CacheMarsh aller300.java:47) at org.jboss.cache.marshall.CacheMarshaller200.marshallCommand(CacheMars haller200.java:519) at org.jboss.cache.marshall.CacheMarshaller200.marshallObject(CacheMarsh aller200.java:314) at org.jboss.cache.marshall.CacheMarshaller300.marshallObject(CacheMarsh aller300.java:47) at org.jboss.cache.marshall.CacheMarshaller200.marshallCommand(CacheMars haller200.java:519) at org.jboss.cache.marshall.CacheMarshaller200.marshallObject(CacheMarsh aller200.java:314) at org.jboss.cache.marshall.CacheMarshaller300.marshallObject(CacheMarsh aller300.java:47) at org.jboss.cache.marshall.CacheMarshaller200.objectToObjectStream(Cach eMarshaller200.java:191) at org.jboss.cache.marshall.CacheMarshaller200.objectToObjectStream(Cach eMarshaller200.java:136) at org.jboss.cache.marshall.VersionAwareMarshaller.objectToBuffer(Versio nAwareMarshaller.java:182) at org.jboss.cache.marshall.VersionAwareMarshaller.objectToBuffer(Versio nAwareMarshaller.java:52) at org.jboss.cache.marshall.CommandAwareRpcDispatcher$ReplicationTask.ca ll(CommandAwareRpcDispatcher.java:369) at org.jboss.cache.marshall.CommandAwareRpcDispatcher$ReplicationTask.ca ll(CommandAwareRpcDispatcher.java:341) at org.jboss.cache.util.concurrent.WithinThreadExecutor.submit(WithinThr eadExecutor.java:82) at org.jboss.cache.marshall.CommandAwareRpcDispatcher.invokeRemoteComman ds(CommandAwareRpcDispatcher.java:206) at org.jboss.cache.RPCManagerImpl.callRemoteMethods(RPCManagerImpl.java: 748) at org.jboss.cache.RPCManagerImpl.callRemoteMethods(RPCManagerImpl.java: 716) at org.jboss.cache.RPCManagerImpl.callRemoteMethods(RPCManagerImpl.java: 721) at org.jboss.cache.interceptors.BaseRpcInterceptor.replicateCall(BaseRpc Interceptor.java:161) at org.jboss.cache.interceptors.BaseRpcInterceptor.replicateCall(BaseRpc Interceptor.java:135) at org.jboss.cache.interceptors.BaseRpcInterceptor.replicateCall(BaseRpc Interceptor.java:107) at org.jboss.cache.interceptors.ReplicationInterceptor.handleCrudMethod( ReplicationInterceptor.java:160) at org.jboss.cache.interceptors.ReplicationInterceptor.visitPutDataMapCo mmand(ReplicationInterceptor.java:113) at org.jboss.cache.commands.write.PutDataMapCommand.acceptVisitor(PutDat aMapCommand.java:104) at org.jboss.cache.interceptors.base.CommandInterceptor.invokeNextInterc eptor(CommandInterceptor.java:116) at org.jboss.cache.interceptors.base.CommandInterceptor.handleDefault(Co mmandInterceptor.java:131) at org.jboss.cache.commands.AbstractVisitor.visitPutDataMapCommand(Abstr actVisitor.java:60) at org.jboss.cache.commands.write.PutDataMapCommand.acceptVisitor(PutDat aMapCommand.java:104) at org.jboss.cache.interceptors.base.CommandInterceptor.invokeNextInterc eptor(CommandInterceptor.java:116) at org.jboss.cache.interceptors.TxInterceptor.attachGtxAndPassUpChain(Tx Interceptor.java:301) at org.jboss.cache.interceptors.TxInterceptor.handleDefault(TxIntercepto r.java:283) at org.jboss.cache.commands.AbstractVisitor.visitPutDataMapCommand(Abstr actVisitor.java:60) at org.jboss.cache.commands.write.PutDataMapCommand.acceptVisitor(PutDat aMapCommand.java:104) at org.jboss.cache.interceptors.base.CommandInterceptor.invokeNextInterc eptor(CommandInterceptor.java:116) at org.jboss.cache.interceptors.CacheMgmtInterceptor.visitPutDataMapComm and(CacheMgmtInterceptor.java:97) at org.jboss.cache.commands.write.PutDataMapCommand.acceptVisitor(PutDat aMapCommand.java:104) at org.jboss.cache.interceptors.base.CommandInterceptor.invokeNextInterc eptor(CommandInterceptor.java:116) at org.jboss.cache.interceptors.InvocationContextInterceptor.handleAll(I nvocationContextInterceptor.java:178) at org.jboss.cache.interceptors.InvocationContextInterceptor.visitPutDat aMapCommand(InvocationContextInterceptor.java:64) at org.jboss.cache.commands.write.PutDataMapCommand.acceptVisitor(PutDat aMapCommand.java:104) at org.jboss.cache.interceptors.InterceptorChain.invoke(InterceptorChain .java:287) at org.jboss.cache.invocation.CacheInvocationDelegate.invokePut(CacheInv ocationDelegate.java:705) at org.jboss.cache.invocation.CacheInvocationDelegate.put(CacheInvocatio nDelegate.java:519) at org.jboss.ha.cachemanager.CacheManagerManagedCache.put(CacheManagerMa nagedCache.java:277) at org.jboss.web.tomcat.service.session.distributedcache.impl.jbc.JBossC acheWrapper.put(JBossCacheWrapper.java:148) at org.jboss.web.tomcat.service.session.distributedcache.impl.jbc.Abstra ctJBossCacheService.storeSessionData(AbstractJBossCacheService.java:405) at org.jboss.web.tomcat.service.session.ClusteredSession.processSessionR eplication(ClusteredSession.java:1166) at org.jboss.web.tomcat.service.session.JBossCacheManager.processSession Repl(JBossCacheManager.java:1937) at org.jboss.web.tomcat.service.session.JBossCacheManager.storeSession(J BossCacheManager.java:309) at org.jboss.web.tomcat.service.session.InstantSnapshotManager.snapshot( InstantSnapshotManager.java:51) at org.jboss.web.tomcat.service.session.ClusteredSessionValve.handleRequ est(ClusteredSessionValve.java:147) at org.jboss.web.tomcat.service.session.ClusteredSessionValve.invoke(Clu steredSessionValve.java:94) at org.jboss.web.tomcat.service.session.LockingValve.invoke(LockingValve .java:62) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(Authentica torBase.java:433) at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValv e.java:92) at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.proce ss(SecurityContextEstablishmentValve.java:126) at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.invok e(SecurityContextEstablishmentValve.java:70) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j ava:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j ava:102) at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedC onnectionValve.java:158) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal ve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.jav a:330) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java :829) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.proce ss(Http11Protocol.java:598) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:44 7) at java.lang.Thread.run(Thread.java:619) 16:38:35,789 ERROR [CommandAwareRpcDispatcher] java.io.NotSerializableException: org.jboss.seam.util.AnnotatedBeanProperty 16:38:35,789 WARN [/a12] Failed to replicate session YwBL69cG-zdm0m5CvzNj3Q__ java.lang.RuntimeException: Failure to marshal argument(s) at org.jboss.cache.marshall.CommandAwareRpcDispatcher$ReplicationTask.ca ll(CommandAwareRpcDispatcher.java:374) at org.jboss.cache.marshall.CommandAwareRpcDispatcher$ReplicationTask.ca ll(CommandAwareRpcDispatcher.java:341) at org.jboss.cache.util.concurrent.WithinThreadExecutor.submit(WithinThr eadExecutor.java:82) at org.jboss.cache.marshall.CommandAwareRpcDispatcher.invokeRemoteComman ds(CommandAwareRpcDispatcher.java:206) at org.jboss.cache.RPCManagerImpl.callRemoteMethods(RPCManagerImpl.java: 748) at org.jboss.cache.RPCManagerImpl.callRemoteMethods(RPCManagerImpl.java: 716) at org.jboss.cache.RPCManagerImpl.callRemoteMethods(RPCManagerImpl.java: 721) at org.jboss.cache.interceptors.BaseRpcInterceptor.replicateCall(BaseRpc Interceptor.java:161) at org.jboss.cache.interceptors.BaseRpcInterceptor.replicateCall(BaseRpc Interceptor.java:135) at org.jboss.cache.interceptors.BaseRpcInterceptor.replicateCall(BaseRpc Interceptor.java:107) at org.jboss.cache.interceptors.ReplicationInterceptor.handleCrudMethod( ReplicationInterceptor.java:160) at org.jboss.cache.interceptors.ReplicationInterceptor.visitPutDataMapCo mmand(ReplicationInterceptor.java:113) at org.jboss.cache.commands.write.PutDataMapCommand.acceptVisitor(PutDat aMapCommand.java:104) at org.jboss.cache.interceptors.base.CommandInterceptor.invokeNextInterc eptor(CommandInterceptor.java:116) at org.jboss.cache.interceptors.base.CommandInterceptor.handleDefault(Co mmandInterceptor.java:131) at org.jboss.cache.commands.AbstractVisitor.visitPutDataMapCommand(Abstr actVisitor.java:60) at org.jboss.cache.commands.write.PutDataMapCommand.acceptVisitor(PutDat aMapCommand.java:104) at org.jboss.cache.interceptors.base.CommandInterceptor.invokeNextInterc eptor(CommandInterceptor.java:116) at org.jboss.cache.interceptors.TxInterceptor.attachGtxAndPassUpChain(Tx Interceptor.java:301) at org.jboss.cache.interceptors.TxInterceptor.handleDefault(TxIntercepto r.java:283) at org.jboss.cache.commands.AbstractVisitor.visitPutDataMapCommand(Abstr actVisitor.java:60) at org.jboss.cache.commands.write.PutDataMapCommand.acceptVisitor(PutDat aMapCommand.java:104) at org.jboss.cache.interceptors.base.CommandInterceptor.invokeNextInterc eptor(CommandInterceptor.java:116) at org.jboss.cache.interceptors.CacheMgmtInterceptor.visitPutDataMapComm and(CacheMgmtInterceptor.java:97) at org.jboss.cache.commands.write.PutDataMapCommand.acceptVisitor(PutDat aMapCommand.java:104) at org.jboss.cache.interceptors.base.CommandInterceptor.invokeNextInterc eptor(CommandInterceptor.java:116) at org.jboss.cache.interceptors.InvocationContextInterceptor.handleAll(I nvocationContextInterceptor.java:178) at org.jboss.cache.interceptors.InvocationContextInterceptor.visitPutDat aMapCommand(InvocationContextInterceptor.java:64) at org.jboss.cache.commands.write.PutDataMapCommand.acceptVisitor(PutDat aMapCommand.java:104) at org.jboss.cache.interceptors.InterceptorChain.invoke(InterceptorChain .java:287) at org.jboss.cache.invocation.CacheInvocationDelegate.invokePut(CacheInv ocationDelegate.java:705) at org.jboss.cache.invocation.CacheInvocationDelegate.put(CacheInvocatio nDelegate.java:519) at org.jboss.ha.cachemanager.CacheManagerManagedCache.put(CacheManagerMa nagedCache.java:277) at org.jboss.web.tomcat.service.session.distributedcache.impl.jbc.JBossC acheWrapper.put(JBossCacheWrapper.java:148) at org.jboss.web.tomcat.service.session.distributedcache.impl.jbc.Abstra ctJBossCacheService.storeSessionData(AbstractJBossCacheService.java:405) at org.jboss.web.tomcat.service.session.ClusteredSession.processSessionR eplication(ClusteredSession.java:1166) at org.jboss.web.tomcat.service.session.JBossCacheManager.processSession Repl(JBossCacheManager.java:1937) at org.jboss.web.tomcat.service.session.JBossCacheManager.storeSession(J BossCacheManager.java:309) at org.jboss.web.tomcat.service.session.InstantSnapshotManager.snapshot( InstantSnapshotManager.java:51) at org.jboss.web.tomcat.service.session.ClusteredSessionValve.handleRequ est(ClusteredSessionValve.java:147) at org.jboss.web.tomcat.service.session.ClusteredSessionValve.invoke(Clu steredSessionValve.java:94) at org.jboss.web.tomcat.service.session.LockingValve.invoke(LockingValve .java:62) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(Authentica torBase.java:433) at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValv e.java:92) at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.proce ss(SecurityContextEstablishmentValve.java:126) at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.invok e(SecurityContextEstablishmentValve.java:70) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j ava:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j ava:102) at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedC onnectionValve.java:158) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal ve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.jav a:330) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java :829) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.proce ss(Http11Protocol.java:598) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:44 7) at java.lang.Thread.run(Thread.java:619)

    Read the article

  • How to use Ninject with XNA?

    - by Rosarch
    I'm having difficulty integrating Ninject with XNA. static class Program { /** * The main entry point for the application. */ static void Main(string[] args) { IKernel kernel = new StandardKernel(NinjectModuleManager.GetModules()); CachedContentLoader content = kernel.Get<CachedContentLoader>(); // stack overflow here MasterEngine game = kernel.Get<MasterEngine>(); game.Run(); } } // constructor for the game public MasterEngine(IKernel kernel) : base(kernel) { this.inputReader = kernel.Get<IInputReader>(); graphicsDeviceManager = kernel.Get<GraphicsDeviceManager>(); Components.Add(kernel.Get<GamerServicesComponent>()); // Tell the loader to look for all files relative to the "Content" directory. Assets = kernel.Get<CachedContentLoader>(); //Sets dimensions of the game window graphicsDeviceManager.PreferredBackBufferWidth = 800; graphicsDeviceManager.PreferredBackBufferHeight = 600; graphicsDeviceManager.ApplyChanges(); IsMouseVisible = false; } Ninject.cs: using System; using System.Collections.Generic; using System.Linq; using System.Text; using Ninject.Modules; using HWAlphaRelease.Controller; using Microsoft.Xna.Framework; using Nuclex.DependencyInjection.Demo.Scaffolding; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.Graphics; namespace HWAlphaRelease { public static class NinjectModuleManager { public static NinjectModule[] GetModules() { return new NinjectModule[1] { new GameModule() }; } /// <summary>Dependency injection rules for the main game instance</summary> public class GameModule : NinjectModule { #region class ServiceProviderAdapter /// <summary>Delegates to the game's built-in service provider</summary> /// <remarks> /// <para> /// When a class' constructor requires an IServiceProvider, the dependency /// injector cannot just construct a new one and wouldn't know that it has /// to create an instance of the Game class (or take it from the existing /// Game instance). /// </para> /// <para> /// The solution, then, is this small adapter that takes a Game instance /// and acts as if it was a freely constructable IServiceProvider implementation /// while in reality, it delegates all lookups to the Game's service container. /// </para> /// </remarks> private class ServiceProviderAdapter : IServiceProvider { /// <summary>Initializes a new service provider adapter for the game</summary> /// <param name="game">Game the service provider will be taken from</param> public ServiceProviderAdapter(Game game) { this.gameServices = game.Services; } /// <summary>Retrieves a service from the game service container</summary> /// <param name="serviceType">Type of the service that will be retrieved</param> /// <returns>The service that has been requested</returns> public object GetService(Type serviceType) { return this.gameServices; } /// <summary>Game services container of the Game instance</summary> private GameServiceContainer gameServices; } #endregion // class ServiceProviderAdapter #region class ContentManagerAdapter /// <summary>Delegates to the game's built-in ContentManager</summary> /// <remarks> /// This provides shared access to the game's ContentManager. A dependency /// injected class only needs to require the ISharedContentService in its /// constructor and the dependency injector will automatically resolve it /// to this adapter, which delegates to the Game's built-in content manager. /// </remarks> private class ContentManagerAdapter : ISharedContentService { /// <summary>Initializes a new shared content manager adapter</summary> /// <param name="game">Game the content manager will be taken from</param> public ContentManagerAdapter(Game game) { this.contentManager = game.Content; } /// <summary>Loads or accesses shared game content</summary> /// <typeparam name="AssetType">Type of the asset to be loaded or accessed</typeparam> /// <param name="assetName">Path and name of the requested asset</param> /// <returns>The requested asset from the the shared game content store</returns> public AssetType Load<AssetType>(string assetName) { return this.contentManager.Load<AssetType>(assetName); } /// <summary>The content manager this instance delegates to</summary> private ContentManager contentManager; } #endregion // class ContentManagerAdapter /// <summary>Initializes the dependency configuration</summary> public override void Load() { // Allows access to the game class for any components with a dependency // on the 'Game' or 'DependencyInjectionGame' classes. Bind<MasterEngine>().ToSelf().InSingletonScope(); Bind<NinjectGame>().To<MasterEngine>().InSingletonScope(); Bind<Game>().To<MasterEngine>().InSingletonScope(); // Let the dependency injector construct a graphics device manager for // all components depending on the IGraphicsDeviceService and // IGraphicsDeviceManager interfaces Bind<GraphicsDeviceManager>().ToSelf().InSingletonScope(); Bind<IGraphicsDeviceService>().To<GraphicsDeviceManager>().InSingletonScope(); Bind<IGraphicsDeviceManager>().To<GraphicsDeviceManager>().InSingletonScope(); // Some clever adapters that hand out the Game's IServiceProvider and allow // access to its built-in ContentManager Bind<IServiceProvider>().To<ServiceProviderAdapter>().InSingletonScope(); Bind<ISharedContentService>().To<ContentManagerAdapter>().InSingletonScope(); Bind<IInputReader>().To<UserInputReader>().InSingletonScope().WithConstructorArgument("keyMapping", Constants.DEFAULT_KEY_MAPPING); Bind<CachedContentLoader>().ToSelf().InSingletonScope().WithConstructorArgument("rootDir", "Content"); } } } } NinjectGame.cs /// <summary>Base class for Games making use of Ninject</summary> public class NinjectGame : Game { /// <summary>Initializes a new Ninject game instance</summary> /// <param name="kernel">Kernel the game has been created by</param> public NinjectGame(IKernel kernel) { Type ownType = this.GetType(); if(ownType != typeof(Game)) { kernel.Bind<NinjectGame>().To<MasterEngine>().InSingletonScope(); } kernel.Bind<Game>().To<NinjectGame>().InSingletonScope(); } } } // namespace Nuclex.DependencyInjection.Demo.Scaffolding When I try to get the CachedContentLoader, I get a stack overflow exception. I'm basing this off of this tutorial, but I really have no idea what I'm doing. Help?

    Read the article

  • ASP.NET Creating a Rich Repeater, DataBind wiping out custom added controls...

    - by tonyellard
    So...I had this clever idea that I'd create my own Repeater control that implements paging and sorting by inheriting from Repeater and extending it's capabilities. I found some information and bits and pieces on how to go about this and everything seemed ok... I created a WebControlLibrary to house my custom controls. Along with the enriched repeater, I created a composite control that would act as the "pager bar", having forward, back and page selection. My pager bar works 100% on it's own, properly firing a paged changed event when the user interacts with it. The rich repeater databinds without issue, but when the databind fires (when I call base.databind()), the control collection is cleared out and my pager bars are removed. This screws up the viewstate for the pager bars making them unable to fire their events properly or maintain their state. I've tried adding the controls back to the collection after base.databind() fires, but that doesn't solve the issue. I start to get very strange results including problems with altering the hierarchy of the control tree (resolved by adding [ViewStateModeById]). Before I go back to the drawing board and create a second composite control which contains a repeater and the pager bars (so that the repeater isn't responsible for the pager bars viewstate) are there any thoughts about how to resolve the issue? In the interest of share and share alike, the code for the repeater itself is below, the pagerbars aren't as significant as the issue is really the maintaining of state for any additional child controls. (forgive the roughness of some of the code...it's still a work in progress) using System; using System.Collections.Generic; using System.ComponentModel; using System.Text; using System.Data; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; [ViewStateModeById] public class SortablePagedRepeater : Repeater, INamingContainer { private SuperRepeaterPagerBar topBar = new SuperRepeaterPagerBar(); private SuperRepeaterPagerBar btmBar = new SuperRepeaterPagerBar(); protected override void OnInit(EventArgs e) { Page.RegisterRequiresControlState(this); InitializeControls(); base.OnInit(e); EnsureChildControls(); } protected void InitializeControls() { topBar.ID = this.ID + "__topPagerBar"; topBar.NumberOfPages = this._currentProperties.numOfPages; topBar.CurrentPage = this.CurrentPageNumber; topBar.PageChanged += new SuperRepeaterPagerBar.PageChangedEventHandler(PageChanged); btmBar.ID = this.ID + "__btmPagerBar"; btmBar.NumberOfPages = this._currentProperties.numOfPages; btmBar.CurrentPage = this.CurrentPageNumber; btmBar.PageChanged += new SuperRepeaterPagerBar.PageChangedEventHandler(PageChanged); } protected override void CreateChildControls() { EnsureDataBound(); this.Controls.Add(topBar); this.Controls.Add(btmBar); //base.CreateChildControls(); } private void PageChanged(object sender, int newPage) { this.CurrentPageNumber = newPage; } public override void DataBind() { //pageDataSource(); //DataBind removes all controls from control collection... base.DataBind(); Controls.Add(topBar); Controls.Add(btmBar); } private void pageDataSource() { //Create paged data source PagedDataSource pds = new PagedDataSource(); pds.PageSize = this.ItemsPerPage; pds.AllowPaging = true; // first get a PagedDataSource going and perform sort if possible... if (base.DataSource is System.Collections.IEnumerable) { pds.DataSource = (System.Collections.IEnumerable)base.DataSource; } else if (base.DataSource is System.Data.DataView) { DataView data = (DataView)DataSource; if (this.SortBy != null && data.Table.Columns.Contains(this.SortBy)) { data.Sort = this.SortBy; } pds.DataSource = data.Table.Rows; } else if (base.DataSource is System.Data.DataTable) { DataTable data = (DataTable)DataSource; if (this.SortBy != null && data.Columns.Contains(this.SortBy)) { data.DefaultView.Sort = this.SortBy; } pds.DataSource = data.DefaultView; } else if (base.DataSource is System.Data.DataSet) { DataSet data = (DataSet)DataSource; if (base.DataMember != null && data.Tables.Contains(base.DataMember)) { if (this.SortBy != null && data.Tables[base.DataMember].Columns.Contains(this.SortBy)) { data.Tables[base.DataMember].DefaultView.Sort = this.SortBy; } pds.DataSource = data.Tables[base.DataMember].DefaultView; } else if (data.Tables.Count > 0) { if (this.SortBy != null && data.Tables[0].Columns.Contains(this.SortBy)) { data.Tables[0].DefaultView.Sort = this.SortBy; } pds.DataSource = data.Tables[0].DefaultView; } else { throw new Exception("DataSet doesn't have any tables."); } } else if (base.DataSource == null) { // don't do anything? } else { throw new Exception("DataSource must be of type System.Collections.IEnumerable. The DataSource you provided is of type " + base.DataSource.GetType().ToString()); } if (pds != null && base.DataSource != null) { //Make sure that the page doesn't exceed the maximum number of pages //available if (this.CurrentPageNumber >= pds.PageCount) { this.CurrentPageNumber = pds.PageCount - 1; } //Set up paging values... btmBar.CurrentPage = topBar.CurrentPage = pds.CurrentPageIndex = this.CurrentPageNumber; this._currentProperties.numOfPages = btmBar.NumberOfPages = topBar.NumberOfPages = pds.PageCount; base.DataSource = pds; } } public override object DataSource { get { return base.DataSource; } set { //init(); //reset paging/sorting values since we've potentially changed data sources. base.DataSource = value; pageDataSource(); } } protected override void Render(HtmlTextWriter writer) { topBar.RenderControl(writer); base.Render(writer); btmBar.RenderControl(writer); } [Serializable] protected struct CurrentProperties { public int pageNum; public int itemsPerPage; public int numOfPages; public string sortBy; public bool sortDir; } protected CurrentProperties _currentProperties = new CurrentProperties(); protected override object SaveControlState() { return this._currentProperties; } protected override void LoadControlState(object savedState) { this._currentProperties = (CurrentProperties)savedState; } [Category("Status")] [Browsable(true)] [NotifyParentProperty(true)] [DefaultValue("")] [Localizable(false)] public string SortBy { get { return this._currentProperties.sortBy; } set { //If sorting by the same column, swap the sort direction. if (this._currentProperties.sortBy == value) { this.SortAscending = !this.SortAscending; } else { this.SortAscending = true; } this._currentProperties.sortBy = value; } } [Category("Status")] [Browsable(true)] [NotifyParentProperty(true)] [DefaultValue(true)] [Localizable(false)] public bool SortAscending { get { return this._currentProperties.sortDir; } set { this._currentProperties.sortDir = value; } } [Category("Status")] [Browsable(true)] [NotifyParentProperty(true)] [DefaultValue(25)] [Localizable(false)] public int ItemsPerPage { get { return this._currentProperties.itemsPerPage; } set { this._currentProperties.itemsPerPage = value; } } [Category("Status")] [Browsable(true)] [NotifyParentProperty(true)] [DefaultValue(1)] [Localizable(false)] public int CurrentPageNumber { get { return this._currentProperties.pageNum; } set { this._currentProperties.pageNum = value; pageDataSource(); } } }

    Read the article

  • does red5 read tomcat-users.xml

    - by baba
    Hi, I have been busy creating an app for Red5. Imagine what was my surprise when I tried to configure basic/digest authentication and I couldn't. What struck me as strange is that I have a running tomcat instance that works and authenticates correctly with the following xmls: web.xml (part of) <security-constraint> <web-resource-collection> <web-resource-name>A Protected Page</web-resource-name> <url-pattern>/stats.jsp</url-pattern> </web-resource-collection> <auth-constraint> <description/> <role-name>tomcat</role-name> </auth-constraint> </security-constraint> <login-config> <auth-method>DIGEST</auth-method> <realm-name>BLAAAAAAAAAAAAAAAAA</realm-name> </login-config> <security-role> <description/> <role-name>tomcat</role-name> </security-role> and a tomcat-users.xml in /conf that looks kinda like this: <?xml version="1.0" encoding="UTF-8"?> <tomcat-users> <role rolename="tomcat"/> <user username="ide" password="bogus" roles="tomcat"/> </tomcat-users> The annoying thing is that configuration authenticates correctly when on tomcat's servlet container, but on the red5's modified one, it just keeps asking for authentication. Am I becoming mad or it should work like a charm? Red5 is version 0_9_1 The stats.jsp is accessible in both servlet containers, the only difference is that when you input the correct password and username in tomcat, you are logged in, and in red5 you are not, it just keeps asking you for the password. Any pointers? Am I missing something? Here is a stack trace of the error I receive AT the moment I try the login: Caused by: java.io.IOException: Unable to locate a login configuration at com.sun.security.auth.login.ConfigFile.init(ConfigFile.java:250) [na:1.6.0_22] at com.sun.security.auth.login.ConfigFile.<init>(ConfigFile.java:91) [na:1.6.0_22] ... 27 common frames omitted [ERROR] [http-127.0.0.1-5080-1] org.apache.catalina.realm.JAASRealm - Cannot find message associated with key jaasRealm.unexpectedError java.lang.SecurityException: Unable to locate a login configuration at com.sun.security.auth.login.ConfigFile.<init>(ConfigFile.java:93) [na:1.6.0_22] at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) [na:1.6.0_22] at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) [na:1.6.0_22] at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) [na:1.6.0_22] at java.lang.reflect.Constructor.newInstance(Constructor.java:513) [na:1.6.0_22] at java.lang.Class.newInstance0(Class.java:355) [na:1.6.0_22] at java.lang.Class.newInstance(Class.java:308) [na:1.6.0_22] at javax.security.auth.login.Configuration$3.run(Configuration.java:247) [na:1.6.0_22] at java.security.AccessController.doPrivileged(Native Method) [na:1.6.0_22] at javax.security.auth.login.Configuration.getConfiguration(Configuration.java:242) [na:1.6.0_22] at javax.security.auth.login.LoginContext$1.run(LoginContext.java:237) [na:1.6.0_22] at java.security.AccessController.doPrivileged(Native Method) [na:1.6.0_22] at javax.security.auth.login.LoginContext.init(LoginContext.java:234) [na:1.6.0_22] at javax.security.auth.login.LoginContext.<init>(LoginContext.java:403) [na:1.6.0_22] at org.apache.catalina.realm.JAASRealm.authenticate(JAASRealm.java:394) [catalina-6.0.24.jar:na] at org.apache.catalina.realm.JAASRealm.authenticate(JAASRealm.java:357) [catalina-6.0.24.jar:na] at org.apache.catalina.authenticator.DigestAuthenticator.findPrincipal(DigestAuthenticator.java:283) [catalina-6.0.24.jar:na] at org.apache.catalina.authenticator.DigestAuthenticator.authenticate(DigestAuthenticator.java:176) [catalina-6.0.24.jar:na] at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:523) [catalina-6.0.24.jar:na] at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) [catalina-6.0.24.jar:na] at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) [catalina-6.0.24.jar:na] at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:555) [catalina-6.0.24.jar:na] at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) [catalina-6.0.24.jar:na] at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298) [catalina-6.0.24.jar:na] at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:852) [tomcat-coyote-6.0.24.jar:na] at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588) [tomcat-coyote-6.0.24.jar:na] at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489) [tomcat-coyote-6.0.24.jar:na] at java.lang.Thread.run(Thread.java:662) [na:1.6.0_22] Caused by: java.io.IOException: Unable to locate a login configuration at com.sun.security.auth.login.ConfigFile.init(ConfigFile.java:250) [na:1.6.0_22] at com.sun.security.auth.login.ConfigFile.<init>(ConfigFile.java:91) [na:1.6.0_22] ... 27 common frames omitted In addition, here is the configuration of red5-web.properties webapp.contextPath=/project Even futher information: Seems to me like it is using the right realm: MemoryRealm [INFO] [main] org.red5.server.tomcat.TomcatLoader - Setting connector: org.apache.catalina.connector.Connector [INFO] [main] org.red5.server.tomcat.TomcatLoader - Address to bind: /127.0.0.1:5080 [INFO] [main] org.red5.server.tomcat.TomcatLoader - Setting realm: org.apache.catalina.realm.MemoryRealm [INFO] [main] org.red5.server.tomcat.TomcatLoader - Loading tomcat context [INFO] [main] org.red5.server.tomcat.TomcatLoader - Server root: C:/Program Files/Red5 [INFO] [main] org.red5.server.tomcat.TomcatLoader - Config root: C:/Program Files/Red5/conf [INFO] [main] org.red5.server.tomcat.TomcatLoader - Application root: C:/Program Files/Red5/webapps [INFO] [main] org.red5.server.tomcat.TomcatLoader - Starting Tomcat servlet engine [INFO] [main] org.apache.catalina.startup.Embedded - Starting tomcat server [INFO] [main] org.apache.catalina.core.StandardEngine - Starting Servlet Engine: Apache Tomcat/6.0.26 However, immediately after bootstraping Tomcat, I am presented with the following error: Exception in thread "Launcher:/administration" org.springframework.beans.factory.BeanDefinitionStoreException: Could not resolve bean definition resource pattern [/WEB-INF/red5-*.xml]; nested exception is java.io.FileNotFoundException: ServletContext resource [/WEB-INF/] cannot be resolved to URL because it does not exist at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:190) at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:149) at org.springframework.web.context.support.XmlWebApplicationContext.loadBeanDefinitions(XmlWebApplicationContext.java:124) at org.springframework.web.context.support.XmlWebApplicationContext.loadBeanDefinitions(XmlWebApplicationContext.java:93) at org.springframework.context.support.AbstractRefreshableApplicationContext.refreshBeanFactory(AbstractRefreshableApplicationContext.java:130) at org.springframework.context.support.AbstractApplicationContext.obtainFreshBeanFactory(AbstractApplicationContext.java:458) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:388) at org.red5.server.tomcat.TomcatLoader$1.run(TomcatLoader.java:594) Caused by: java.io.FileNotFoundException: ServletContext resource [/WEB-INF/] cannot be resolved to URL because it does not exist at org.springframework.web.context.support.ServletContextResource.getURL(ServletContextResource.java:132) at org.springframework.core.io.support.PathMatchingResourcePatternResolver.isJarResource(PathMatchingResourcePatternResolver.java:414) at org.springframework.core.io.support.PathMatchingResourcePatternResolver.findPathMatchingResources(PathMatchingResourcePatternResolver.java:343) at org.springframework.core.io.support.PathMatchingResourcePatternResolver.getResources(PathMatchingResourcePatternResolver.java:282) at org.springframework.context.support.AbstractApplicationContext.getResources(AbstractApplicationContext.java:1156) at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:177) ... 7 more This error is kinda strange, because after this it seems that /WEB-INF/ is found by the rest of the program by the following output: [INFO] [Launcher:/SOSample] org.springframework.beans.factory.config.PropertyPlaceholderConfigurer - Loading properties file from ServletContext resource [/WEB-INF/red5-web.properties] [INFO] [Launcher:/installer] org.springframework.beans.factory.config.PropertyPlaceholderConfigurer - Loading properties file from ServletContext resource [/WEB-INF/red5-web.properties] [INFO] [Launcher:/] org.springframework.beans.factory.config.PropertyPlaceholderConfigurer - Loading properties file from ServletContext resource [/WEB-INF/red5-web.properties] [INFO] [Launcher:/LiveMedia] org.springframework.beans.factory.config.PropertyPlaceholderConfigurer - Loading properties file from ServletContext resource [/WEB-INF/red5-web.properties] What really annoys me is that, as you can see in the output, when I try to login, I get a JAASRealm-related exception, but in the debug output when Tomcat is loading, it is clear to me that it expects a MemoryRealm. I was wondering where and how in red5.xml should I specify bean properties such that I force red5 to use MemoryRealm that is under /conf/tomcat-users.xml, because it certainly doesn't do so now. It seems like the biggest question I have posted so far, but I tried to explain it as fully as possible as to avoid confusion.

    Read the article

< Previous Page | 168 169 170 171 172 173 174  | Next Page >