Search Results

Search found 4858 results on 195 pages for 'terminal'.

Page 172/195 | < Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >

• RTL8192SU Linux Issue Installing Driver

  - by s32ialx

  OK I've read tons of fourms of people getting the onboard RTL8192SE working and the RTL8192SU working dif is U = USB they are both N and i have both Toshiba L500D-00T pre-installed Win Vistax64-HP and i have obtained the free Win7x64-HP upgrade the onboard wificard sucks and can't hold a stable connection for more then 20minutes in windows but the usb is amazing. Now problem is i tried both Ubuntu and Mandriva with no resolve the issue is the onboard drive detects and actually SHOWS that it's there but no wireless networks detect so it's saying no SSID's are broadcasting which i know is a lie since I'm running a 2wire bell dsl modem with built in wifi and a Linksys wrt54g w/ DD-WRT firmware and both are broadcasting fine. Why don't i use the USB? In the hardware device manager in mandriva it shows up as unknown but shows that it's realtek and that it's a 8192 chipset. but no option to for a driver install and when i do a make in terminal i get this error and no clue what it means [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# make make: *** /lib/modules/2.6.31.12-desktop-3mnb/build: No such file or directory. Stop. make: *** [all] Error 2 [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# any help appreciated. and just encase I'm running currently Mandriva Spring 2010 Free

  Read the article

• Writing a script for ash?

  - by rumtscho

  My VPN is behaving funny sometimes, and I have to restart it often. I wanted to write a script which does that for me. It doesn't have to be anything fancy, just a shortcut for the commands I have to type into the terminal. More specifically: it will look at the running processes. If it finds a running vpnc process, it will kill it. Then it will start vpnc. I've written bash scripts of similar complexity, but now I don't have a bash, only an ash. Until now, the only difference I noticed is that there are much less commands available, but then, I don't use it very often. So I have some questions. Is writing ash scripts different than writing bash scripts? Is there something specific to consider when doing it? When the script is ready, how can I deploy it? For bash, I just put the executable file under /usr/lib and run it by typing the file name into the command line, will this work with ash? Are there any special pitfalls to watch out for in the script I want to write? I think that the killing process part may get hairy, if I write something that kills the wrong process, but even then running the script shouldn't break anything permanently, right?

  Read the article

• Wicked VNC Viewer acting out on Windows desktop and CentOS 6.3 server

  - by Johnny Lee

  What we have here is the only way to open the TightVNC viewer on this Windows XP desktop is to have a TigerVNC viewer open on the CentOS 6.3 server desktop. I know it sounds really weird and we’re looking for hints to make it go away. Any ideas? Here is the recipe: We are using Putty on the Windows desktop as SSH (Secure Shell) and a Terminal Emulator. We open and login to Putty then open a login to TightVNC viewer. After many failed attempts, much Googling, and lots of reading to no avail I decided to open the TigerVNC viewer on the CentOS 6.3 server by way of the GNOME desktop Application menu -- Internet tab. After opening and logging into the TigerVNC viewer on the CentOS 6.3 Server, Voila!! We have a remote desktop opened on the server. But what was an interesting discovery was that the TigerVNC viewer on the server had a request on the desktop that was not on the server desktop. This turned out to be a login request that once the password was entered it opened the TightVNC viewer on the Windows desktop. Weird huh? -Why is that password request showing up on the CentOS 6.3 server in the TigerVNC viewer as oppose to showing up on the Windows desktop when logging in using TightVNC viewer to the server?

  Read the article

• Windows Server (SBS) 2008 - Telephony service won't start (missing permissions)

  - by Uri

  I am running a SBS 2008 server. It's setup as the domain controller for the network. After a reboot, the Telephony service (and all services that depend on it) refuses to start under the Network Service account. The error given is: Error 1297: A privilege that the service requires to function properly does not exist in the service account configuration. You may use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view the service configuration and the account configuration. This has caused all the network services not to be accessible e.g. terminal services, VPN (RRAS), SQL Server instances. The SSH daemon I have running on the box will accept connections only from localhost, but won't respond on the network. After searching around, the only advice I could find was to grant the Network Service account these permissions: Adjust memory quotas for a process Replace a process level token I set those permissions on both the Default Domain Policy and the Default Domain Controller Policy, but it seemingly had no effect. Most of the services will start if I change them to run under the Local System account, but that didn't make them accessible on the network. I even tried removing the Routing and Remote Access Services feature, rebooting and reinstalling it, but the issue remains. Any ideas?

  Read the article

• BOINC error code -1200 when opening...

  - by Erik Vold

  I installed boinc 6.10.21 on my macosx 10.5 in order to upgrade from a 6.6 version that I was running today, and I am the admin user, and I was logged in as the admin user. As I was installing 6.10.21 I was asked if non admin users should be allowed to use boinc, and I said 'yes' to this. Then when I tried to open boinc I got a message like the following: "You currently are not authorized to manage the client. Either re-install and allow non-admin users or contact your administrator to add you to the 'boinc_master' user group." So I tried to reinstall first, and I was not asked if non admin users should be allowed to use boinc.. so I retried a few times and got no different result.. So I downloaded 6.10.43 and installed that, and again I was not asked if non admin users should be allowed to use boinc.. and when I tried to run boinc I got the same message like: "You currently are not authorized to manage the client. Either re-install and allow non-admin users or contact your administrator to add you to the 'boinc_master' user group." So I did a google search trying to figure out how to add my admin user to the bonic_master user group and found this which suggested I run the following in terminal: "sudo dscl . -append /Groups/boinc_master GroupMembership <your user's short name> CR" So I did this and now I get the following error: BOINC ownership or permissions are not set properly; please reinstall BOINC (Error code -1200) So I reinstall and I am ever asked the question about allowing non admin users again, and I still get this error message every after every reinstall attempt.. What should I do?..

  Read the article

• Linux can't find file that exists

  - by Joe

  I'm trying to get Google's Dart language up and running, but it errors when running dart2js. I'm running Arch linux and I installed dart-sdk from AUR. Some relevant terminal output lies below. % dart2js main.dart /usr/local/bin/dart2js: line 7: /usr/local/bin/dart: No such file or directory % cat /usr/local/bin/dart2js #!/bin/sh # Copyright (c) 2012, the Dart project authors. Please see the AUTHORS file # for details. All rights reserved. Use of this source code is governed by a # BSD-style license that can be found in the LICENSE file. BIN_DIR=`dirname $0` exec $BIN_DIR/dart --allow_string_plus=false $BIN_DIR/../lib/dart2js/lib/compiler/implementation/dart2js.dart "$@" % file /usr/local/bin/dart /usr/local/bin/dart: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.15, BuildID[sha1]=0x27fe166ca015c1adfeaf3a6f9c018e7d7af46d9f, stripped % ls -alh /usr/local/bin total 4.9M drwxr-xr-x 2 root root 4.0K Jun 10 22:51 . drwxr-xr-x 12 root root 4.0K Jun 10 22:51 .. -rwxr-xr-x 1 root root 422K May 10 22:41 cargo -rwxr-xr-x 1 root root 2.7M Jun 10 22:50 dart -rwxr-xr-x 1 root root 360 Jun 6 16:20 dart2js -rwxr-xr-x 1 root root 176 Jun 6 16:20 pub -rwxr-xr-x 1 root root 166K May 10 22:41 rustc -rwxr-xr-x 1 root root 1.6M May 10 22:41 rustdoc % uname -rm 3.3.7-1-ARCH x86_64 Could it be because I'm running a 64bit OS and the dart binary is 32bit?

  Read the article

• Menu tab completion for recent history in zsh

  - by dat5h

  I am interested in a potential zle widget for zsh. Is there a way to build a widget that mimics the kill-completion selectable menu? Essentially I want to be able to press , tab in vi-command-mode, or maybe !-tab-completion at the shell and get a list of recent history (or related history compared what is already entered at the commandline) that allows me to scroll through it and possibly select a relevant function to call or compare similar calls. Looking through the manual I stumbled onto a similar widget that I have mapped like so: # tab completion history menu (vicmd) autoload -z history-beginning-search-menu zle -N history-beginning-search-menu-space-end history-beginning-search-menu bindkey -M vicmd "\t" history-beginning-search-menu-space-end # emacs binding could be "\e\t"? (I wouldn't know) Therefore, if I enter vicmd and hit tab when I enter something like "grep", then I get a list of all grep calls in history. It also asks me for the list-number and it will perform the numbered item in history. If I enter a space and then try this, it lists ALL of my history history. This is fairly close to what I want, but there are some problems. For example, 1) it prints the entire list of relevant history and does not check the number of lines of the screen so it could easily blow up the space on the terminal; 2) when I type in numbers for selecting an item in history it does not show me the numbers I type, so I may make a mistake and have to start over again; 3) I would love to be able to hook in appearance tweaks. I was wondering if there exists more updated version of this widget or if there is any way to look at the source for kill-completion or history-beginning-search-menu to see if I could think of a way to do it.

  Read the article

• compose-key mappings differ between gtk and qt apps

  - by intuited

  I'm noticing that there is an inconsistency in the output of one of the compose-key combos. When I type ( [Compose] . . ) under Chrome, gedit, gnome-terminal, or roxterm I get the character '?'. This is a small raised dot: $ echo -n '?' | xxd 0000000: cb99 .. When I type the same combo under konsole, yakuake, or kate, I get the character '…'. This is an ellipsis: $ echo -n '…' | xxd 0000000: e280 a6 ... This is not a font issue: if I copy-paste the characters from an app using one toolkit to an app using the other, its appearance is maintained. I use a few other combos pretty regularly and they seem to work consistently across toolkits. I think this is a pretty recent phenomenon. I upgraded from Ubuntu 8.10 to 9.10 fairly recently so this might be related. I'm not sure if this will reoccur if I restart X, and I'd rather not find out. Can someone explain how this is possible, and what I can do to resolve it? I'd like to have the ellipsis appear in all apps when that combo is entered.

  Read the article

• Time drift in Cloud Server - need to mainpulate GRUB config

  - by Aditya Advani

  We are hosting a VPS on a popular host and are experiencing a regular time drift of several minutes a day forward (approx 7). Linux Kernel: 2.6.18-164.11.1.el5 GNU/Linux Distro: CentOS release 5.4 (Final) We reached out to our hosting provider and their support advised us " This is a known issue with Cloud Servers. To fix this you will need to add one line to your grub config located at: /boot/grub/menu.lst The line you need to add is: noapic nolapic divider=10 nolapic_timer This should correct this issue. You will need to restart after this is added in. " Because I am wary of manipulating grub, mostly I'm terrified that our server may fail to restart - I ask you guys, the pro *nix admins - where exactly in this file does the recommended insertion below: # line from 1&1 for time syncing issue (Case 5163) noapic nolapic divider=10 nolapic_timer go? Please specify where exactly, and whether the order of commands is or is not important. Why is the block below "title CentOS ..." indented? If someone could give me an overview of how this works or point me to a resource that's easy to follow, that's what I'm looking for immediately, a light overview or basic understanding of what I;m doing. If GRUB and bootloaders are a deep dark treasure trove of kernel hacking or something, that's great well-recommended in-depth resources are also very welcome. This is my current /boot/grub/menu.lst # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file #boot=/dev/sda # serial --unit=0 --speed=57600 terminal --timeout=5 serial console timeout=5 title CentOS (2.6.18-164.11.1.el5) root (hd0,0) kernel /boot/vmlinuz-2.6.18-164.11.1.el5 ro root=/dev/hda1 console=tty0 console=tty initrd /boot/initrd-2.6.18-164.11.1.el5.img MOST IMPORTANT: I need to know where in the file above it is appropriate to paste the suggested line so I can confidently restart my VPS after manipulating GRUB config

  Read the article

• Mounting NAS drive with cifs using credentials file through fstab does not work

  - by mahatmanich

  I can mount the drive in the following way, no problem there: mount -t cifs //nas/home /mnt/nas -o username=username,password=pass\!word,uid=1000,gid=100,rw,suid However if I try to mount it via fstab I get the following error: //nas/home /mnt/nas cifs iocharset=utf8,credentials=/home/username/.smbcredentials,uid=1000,gid=100 0 0 auto .smbcredentials file looks like this: username=username password=pass\!word Note the ! in my password ... which I am escaping in both instances I also made sure there are no eol in the file using :set noeol binary from Mount CIFS Credentials File has Special Character chmod on .credentials file is 0600 and chown is root:root file is under ~/ Why am I getting in on the one side and not with fstab?? I am running on ubuntu 12 LTE and mount.cifs -V gives me mount.cifs version: 5.1 Any help and suggestions would be appreciated ... UPDATE: /var/log/syslog shows following [26630.509396] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [26630.509407] CIFS VFS: Send error in SessSetup = -13 [26630.509528] CIFS VFS: cifs_mount failed w/return code = -13 UPDATE no 2 Debugging with strace mount through fstab: strace -f -e trace=mount mount -a Process 4984 attached Process 4983 suspended Process 4985 attached Process 4984 suspended Process 4984 resumed Process 4985 detached [pid 4984] --- SIGCHLD (Child exited) @ 0 (0) --- [pid 4984] mount("//nas/home", ".", "cifs", 0, "ip=<internal ip>,unc=\\\\nas\\home"...) = -1 EACCES (Permission denied) mount error(13): Permission denied Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Process 4983 resumed Process 4984 detached Mount through terminal strace -f -e trace=mount mount -t cifs //nas/home /mnt/nas -o username=user,password=pass\!wd,uid=1000,gid=100,rw,suid Process 4990 attached Process 4989 suspended Process 4991 attached Process 4990 suspended Process 4990 resumed Process 4991 detached [pid 4990] --- SIGCHLD (Child exited) @ 0 (0) --- [pid 4990] mount("//nas/home", ".", "cifs", 0, "ip=<internal ip>,unc=\\\\nas\\home"...) = 0 Process 4989 resumed Process 4990 detached

  Read the article

• Tomato OS: "memory exhausted" running vi .... how to solve?

  - by Sam Jones

  I have set up tomato (shibby) on an asus RT-N66U router. It works great. I loaded up a few pieces, like transmission and optware. I can run vi, but when I run vi it fails with a "memory exhausted" error, and the terminal session hangs. For reference: If I simply start "vi" it runs fine. But if I specify vi I get the memory exhausted error, even if the file I am opening is just a couple of hundred bytes in size (like fstab). I discovered that my swap partition was not properly set up, so I did that. The swapon command now indicates I really do have a swap: [root@MyRouter samba]$ swapon -s Filename Type Size Used Priority /dev/sda1 partition 32900860 0 1 How can I get vi to work? Thanks! System setup reference information: asus RT-N66U router 2TB usb hard drive partitions on hard drive: Disk /dev/sda: 2000.4 GB, 2000398839808 bytes 255 heads, 63 sectors/track, 30400 cylinders Units = cylinders of 16065 * 4096 = 65802240 bytes Disk identifier: 0xfacbc8ab Device Boot Start End Blocks Id System /dev/sda1 1 512 32900868 82 Linux swap / Solaris /dev/sda2 513 29000 1830638880 83 Linux running samba memory: $ cat /proc/meminfo MemTotal: 255840 kB MemFree: 210980 kB Buffers: 5264 kB Cached: 22768 kB SwapCached: 0 kB Active: 20272 kB Inactive: 11448 kB HighTotal: 131072 kB HighFree: 99868 kB LowTotal: 124768 kB LowFree: 111112 kB SwapTotal: 32900860 kB SwapFree: 32900860 kB Dirty: 0 kB Writeback: 0 kB TIA!

  Read the article

• Get details / solve issue with a kernel panic?

  - by Joseph

  I have a Lenovo T430 running Linux Mint 13 (MATE): joseph:~$ uname -a Linux joseph-T430-LM 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I installed Mint immediately after getting the laptop about two weeks ago, and have noticed that about once a day, the computer will completely freeze up- I can't use Ctrl+Alt+Backspace to restart X, I can't use Ctrl+Alt+F1 to get a text only terminal, can't move mouse, can't type, and if any music was playing it just gets stuck in about a 1-second loop. There is a Windows partition, but I haven't had any issues in Windows. I couldn't find a common thread between the freezes, they were seemingly random (sometimes right after I clicked the mouse, sometimes not; sometimes with Pandora/flash being used, sometimes not, etc). I assume they're kernel panics since it completely locks up, but the laptop doesn't have a capslock or scroll lock LED. It is on a dock and I do have a USB keyboard, but the scroll lock/capslock lights do not flash when it happens (not sure if this is indicating its not a kernel panic, or if the kernel panic just wouldn't illuminate the LEDs on a usb keyboard attached to a laptop dock). This was annoying but not terrible. However, I've found a way to reproduce it. I have a particular CSV file that when I open up in LibreOffice Calc and scroll around, the same thing happens- complete lock up. I really need to use this file, so I'd like to fix the issue, but at the least it's given me a test case to work with. So, having a case where I can cause this issue, what can I do to better find out what's going on? I've looked in /var/log/syslog but haven't found anything seemingly useful. Any thoughts?

  Read the article

• Mac 10.5 Python libsvm 64 bit vs 32 bit

  - by shadowsoul

  I have a Mac 10.5 when I type "python" in terminal, it says Enthought Python Distribution -- www.enthought.com Version: 7.3-2 (64-bit) Python 2.7.3 |EPD 7.3-2 (64-bit)| (default, Apr 12 2012, 11:14:05) [GCC 4.0.1 (Apple Inc. build 5493)] on darwin Type "credits", "demo" or "enthought" for more information. then I go to my libsvm/python folder and type "make" which results in make -C .. lib if [ "Darwin" = "Darwin" ]; then \ SHARED_LIB_FLAG="-dynamiclib -W1,-install_name,libsvm.so.2"; \ else \ SHARED_LIB_FLAG="-shared -W1,-soname,libsvm.so.2"; \ fi; \ g++ ${SHARED_LIB_FLAG} svm.o -o libsvm.so.2 when I try to do "from svmutil import *" I get the error: OSError: dlopen(.../libsvm-3.12/python/../libsvm.so.2, 6): no suitable image found. Did find: .../libsvm-3.12/python/../libsvm.so.2: mach-o, but wrong architecture when I do "lipo -info libsvm.so.2", I get: Non-fat file: libsvm.so.2 is architecture: i386 So it looks like I'm running 64-bit python but libsvm ends up as a 32-bit program. Any way I can get it to compile as a 64-bit program?

  Read the article

• Xvnc4 started from xinetd only displays empty gray X screen

  - by Scott Thomason

  Hi. I'm attempting to setup an Ubuntu 10.10 box so that anyone can connect to port 5900 and be greeted by the gdm login manager. To do so, I added a vnc entry in /etc/services and I am starting Xvnc4 using this xinetd config file: service vnc { protocol = tcp socket_type = stream wait = no user = nobody server = /usr/bin/Xvnc server_args = -geometry 1000x700 -depth 24 -broadcast -inetd -once -securitytypes None } This kind of works...I can start multiple sessions all to port 5900, and I get an X screen. The problem is that I only get an empty, gray X screen with no applications started. I know when you run vncserver from the command line it will look to your ~/.vnc/ directory for your passwd and xstartup files, and I think what I want to do is put "gnome-session" into the xstart file. However, which xstartup file? The running user is "nobody" who obviously doesn't have a ~/.vnc/ directory. I tried a /root/.vnc/xstartup file and a ~scott/.vnc/xstartup file and it doesn't look like they were even read. I changed the xinetd vnc service so that it would "strace" Xvnc4. I looked thru all the "open" lines and didn't get a clue as to what file it was trying to read for xstart. Can anyone help? I just want a terminal server where the user is presented with a gdm login screen.

  Read the article

• Unable to connect remotely to Vsftpd server set up on CentOS VirtualBox

  - by ryekayo

  I have set up a Vsftp server using the following instructions provided Here and even went as far as following the commentary at the bottom. But I am unable to connect remotely. When I attempt to use FileZilla or my Ubuntu terminal, I always get: ryan@ryan-Galago-UltraPro:~$ ftp 10.0.x.xx ftp: connect: Connection timed out ftp> I have checked and re-checked iptables conf file and made sure that Port 21 is being Accepted and it is. I have looked this up on the web and decided to try nmap to port scan it and this is what I get for a result: ryan@ryan-Galago-UltraPro:~$ nmap -PN 10.0.xx.xx Starting Nmap 6.40 ( http://nmap.org ) at 2014-08-19 15:01 EDT Nmap scan report for 10.0.xx.xx Host is up. All 1000 scanned ports on 10.0.xx.xx are filtered Nmap done: 1 IP address (1 host up) scanned in 201.38 seconds Is there anything else that I should do or check for? UPDATE: I have tried to ping from the virtual machine to my IP address on Ubuntu and have been successfully able to. I cannot ping to my virtual machine from Ubuntu. I have narrowed this down to possibly being a firewall related issue on Ubuntu's side, but why would I be unable to connect from FileZilla?

  Read the article

• Fedora, ssh and sudo

  - by Ricky Robinson

  I have to run a script remotely on several Fedora machines through ssh. Since the script requires root priviliges, I do: $ ssh me@remost_host "sudo touch test_sudo" #just a simple example sudo: no tty present and no askpass program specified The remote machines are configured in such a way that the password for sudo is never asked for. For the above error, the most common fix is to allocate a pseudo-terminal with the -t option in ssh: $ ssh -t me@remost_host "sudo touch test_sudo" sudo: no tty present and no askpass program specified Let's try to force this allocation with -t -t: $ ssh -t -t me@remost_host "sudo touch test_sudo" sudo: no tty present and no askpass program specified Nope, it doesn't work. In /etc/sudoers of course I have this line: #Defaults requiretty ... but I can't manually change it on tens of remote machines. Am I missing something here? Is there an easy fix? EDIT: Here is the sudoers file of a host where ssh me@host "sudo stat ." works. Here is the sudoers file of a host where it doesn't work. EDIT 2: Running tty on a host where it works: $ ssh me@host_ok tty not a tty $ ssh -t me@host_ok tty /dev/pts/12 Connection to host_ok closed. $ ssh -t -t me@host_ok tty /dev/pts/12 Connection to host_ok closed. Now on a host where it doesn't work: $ ssh me@host_ko tty not a tty $ ssh -t me@host_ko tty not a tty Connection to host_ko closed. $ ssh -t -t me@host_ko tty not a tty Connection to host_ko closed.

  Read the article

• GNOME 2 + Compiz equivalent?

  - by virtualeyes

  Running Fedora 14 and realize I need to either change distros or find an alternative to GNOME 3 in Fedora 17. Based on what I have read to-date, XFCE and KDE are the go-to WMs if I want to avoid GNOME 3. I tried KDE 4 and I wasn't impressed; I like the simplicity of GNOME 2 with Compiz and Emerald. Can't stay on Fedora 14 forever, however, so...where to turn? Basically looking for these features in my desktop environment: GNOME Do or equivalent Snap to grid/Window tiling A must-have, the ability to hot key focused window to a monitor grid region is a huge productivity win. Zoom window to cursor In a multi-monitor setup sometimes it's nice to, say, GNOME Do terminal in one monitor and then hot key the opened window to the other monitor just by zipping the mouse cursor anywhere on target monitor (followed by, of course, snap-to-grid hotkey, all without a single mouse click) Polarization At night white background hurts the eyes, so I prefer to hot key polarize to black. Multi-monitor support I'm partial to Fedora given that I've worked with CentOS for years and have little experience with any other Linux distro; however, if the difference between Fedora and Arch, Mint, etc. is fairly subtle, I'll make the leap, just need a distro & desktop environment that allows me to be productive with keyboard hot keys and provides the above basic features. Any suggestions?

  Read the article

• Read Only Domain Controllers and DNS zone updates

  - by Mike M

  I have a Windows 2003 domain and just added a new DC that runs 2008 R2. I updated the schema accordingly for both forest and domain levels. I also made sure to run /rodcprep at the time I did this. I have a branch office with a 2008 R2 file/print server that is a read-only domain controller (DC). The one problem I have been having is with AD-integrated DNS records updates. In the data center, we had to make an IP address change on a particular server. All our other sites' DCs (2003) updated the record fine. The 2008 R2 DC in the data center also updates its record fine. However, the RODC in the branch office does not. So if I nslookup the target server on a 2003 DC, the IP address is correct. Same with the 2008 R2 DC in the data center. But an nslookup on the branch office RODC still pulls in the old IP address. Moreover, any new records we've created (e.g., just added a new terminal server) do not get updated on the branch RODC either. Is there something simple I'm missing? How do I get the RODC to sync its AD-integrated DNS records with the rest of my world? Thank you in advance for your responses. Mike

  Read the article

• Ubuntu rm not deleting files

  - by ILMV

  My colleague and I have been struggling with deleting a directory and its contents. We are working on a new version of our websites source code on Ubuntu 8.04 (dir: /var/www/websites), what we want to do is delete the websites directory and recreate it from a .tar backup we created a couple weeks ago. The purpose of this is so we can run our deployment procedure in a local environment before we do so on our live / public environment. We use this command: rm -r websites This deletes the directory and the files within it. The problem occurs when we un-tar our backup file and view the website we are getting files that don't exist in the .tar backup, in fact these files were only created a few days ago and should have been deleted. We delete the directory once more in the manner stated above, we then create a new websites directory using the mkdir command. Strangely at this stage the 'deleted files' do not come back, but if we unpack our .tar file the 'deleted files' appear again. Is there a way to ensure these files are deleted, or at least the pointers that associate them with said directory. Our .tar backup does not include these files We do not want to use the shred command We do not want to use 3rd party applications Solution should be functional via terminal (SSH) Many thanks! EDIT Er... we fixed it. Turns out the files that are reappearing are because of a link we have to another directory (outside the /var/www/websites), we were restoring the link but not deleting the files on the other end. D'oh! Many thanks for your help guys... friday afternoon syndrome :-)

  Read the article

• Quick, Linux-compatible unit-aware calculator

  - by endolith

  I want to be able to press a keyboard combination, start typing a mathematical expression that includes units and slightly advanced math (not just a four-function calculator), and get a result immediately, in units that I specify, that I can copy and paste. Currently I open Firefox and press Ctrl+K, type in the search box, and it usually gives me a result in the drop-down from Google Calculator. It doesn't always, though, so I press "=" at the end, wait for a result, remove the equals, wait for a result, realize it doesn't understand the way I typed a unit, open the result in a new tab, etc. it sucks. Wolfram Alpha is smarter, but very much slower, and the output is all images, not text, and I don't have a quick widget for it, if such a thing could even exist. GNU units has a ton of units, which is great, and I can define my own units, which is great, but they have to be written in specific, unintuitive ways, it doesn't handle much advanced math, and I'd need to open a terminal, start units, etc. I hate the command line. I wasted a lot of time trying to make front-ends for units in Deskbar and Launchy, but I'm not a real coder and I don't use either of those anymore. Any other solutions or enhancements of these?

  Read the article

• Hard drive failed, suspected filesystem corruption, still cannot salvage any data from harddrive

  - by Hippy-Head

  Firstly, I am terribly sorry if this is a duplicate, but I couldn't find a similar issue to mine, so here goes. I have a 1TB hdd bought around 8 months ago used as backup hard drive. I have not used the drive for a period of time whatsoever, and when I was trying to get back to some files on it, it was completely wiped just like that. At first it would not boot I tried everything from command line chkdsk and filesystem recovery software to rebuilt it. After a few attempts I managed to initialize it, at that time it was an achievement. The problems started when I tried to recover the data inside, I have used A LOT of software free and commercial software on both Mac and Windows, with the help of cmd or Terminal commands, however no data of any kind was recovered, even after leaving it thoroughly scan for around 9-10 hours all night sometimes longer, with no results at all. I am somewhat desperate, I am usually good at retrieving data from corrupt hard drives, but this is not the case. Call me paranoid, but I do not want to give it to someone to fix it for me, as I have a lot of photos and personal stuff that I do not want anyone to see.

  Read the article

• "Learning" Linux

  - by Strider

  I've been interested in computers for a long time and have fiddled with a lot of stuff which includes Linux. I started out with Red Hat when I was young (around 13) and lost all data, converting a FAT32 drive to something else. Later it was Knoppix which was really helpful in recovery and such. Then, it was Ubuntu. Also, I fiddled with Arch for some time, but, it breaks too often for my liking (maybe, I should have been more careful). Anyway, currently I use Ubuntu 9.04. I want to dig deeper into the Linux world now. I want to learn how things work and use the terminal more. I am a programmer as well, so, it will help a lot. So, the thing I wanted to ask were: Good books to learn and understand Linux Good habits to use Linux more efficiently. Good tools about which I should know. Amount of time you set aside to learn about new things each day. As a programmer, how do you setup and use Linux efficiently. Long list. I will be grateful to the answerers.

  Read the article

• Can't log in after restoring from Time Machine

  - by Jay Conrod

  My friend uses a Macbook Pro with Snow Leopard 10.6.2. She uses both FileVault and Time Machine to preserve her data. Recently, she suffered a hard disk failure. After restoring from Time Machine using the Snow Leopard install disk, she gets the following error when logging in: You are unable to log in to the FileVault user account at this time. Logging into the account failed because an error occurred. When examining the file system through Terminal, I noticed her home directory is not present: there is no /Users/username directory, or the FileVault .sparsebundle file that's supposed to be there. When using Time Machine.app on /Users, it appears as if her home directory as never there. Additionally, I did a search on the backup disk with the following command: sudo find /Volumes/backup -name '*.sparsebundle' No results. She told me that after working with some large data files, Time Machine would come on, and it would sound like it was transferring a lot of data to the hard disk. Time Machine must have been doing something, right? How can we recover her files? Are they still there?

  Read the article

• How to enable the 2 concurrent (+1 console) sessions on Windows Server 2012

  - by Dai

  I have a Windows Server 2012 VM running on Windows Azure. I want to enable the ability for 2 simultaneous administrative sessions over Remote Desktop. This is permitted under the EULA for Windows Server 2012. This is NOT the same thing as the fully-blown Terminal Services / RDS feature. In Windows Server 2000 and 2003, multiple concurrent sessions (up to a limit of 2, plus the root /console session) were enabled by default (such that logging-in via RDP without logging-out first would create a new session rather than reconnecting to the old session). In Server 2008 and later it uses single-sessions by default, as this simplifies administration (as most people want to connect to old sessions). In Windows Server 2008 R2, you can add the MMC snap-ins for Remote Desktop Host Configuration which allows you to re-enable concurrent sessions. However, in Server 2012, after adding the Remote Administration snap-ins from Server Manager it seems the Remote Desktop Host Configuration snap-in has been removed. How can I re-enable the multiple concurrent sessions for Remote Desktop for Administration in Windows Server 2012?

  Read the article

• Unable to access stackexchange sites from this system

  - by Sandeepan Nath

  Earlier, I was not able to access most of the stackexchange sites like stackoverflow, programmers.SE etc. on my home Windows XP system. I was able to access only a few like http://meta.stackexchange.com and not even http://www.meta.stackexchange.com (note the www). I tried many other sites like http://www.stackoverflow.com, http://area51.stackexchange.com/ but was getting page not found errors on all browsers. Even pinging from terminal was saying destination host unreachable. I did not check recently but may be all SE sites are unreachable now. I was clueless about what could be the issue. I thought some firewall issue? So, I stopped AVG antivirus's firewall, then completely uninstalled it and even turned of windows firewall. But still not reachable even after fresh installation of Windows 7. Then I noticed a "Too many requests" notice on google. This page - http://www.google.co.in/sorry/?continue=http://www.google.co.in/# I don't know why this appeared but I guess somehow too many requests might have been sent to these sites and they blocked me. But in that case, SE would be smart enough to show a captcha like google. So, how to confirm the problem and fix it. Similar questions like these don't look solved yet - Unable to access certain websites Unable to Access Certain Websites I have lately started actively participating in lots of SE sites. There are new new questions popping up in my mind every time and I am not able to ask them. Please help! Thanks

  Read the article

< Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >