Search Results

Search found 5140 results on 206 pages for 'crazy bash'.

Page 173/206 | < Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >

• Traffic Shaping using tc

  - by Simon

  Hi guys, I have a 1.5 Mbit/s link that i want to share with 150 users. My setup is the following: Linux box with 3 NICs eth0 - public ip eth1 - subnet A - 50 users (static ips) eth2 - subnet B - 100 users (via dhcp) I am using squid as a transparent proxy on port 3128. dhcp server using ports 67 and 68. I was creating, but I think packets are not going to the right queues #!/bin/bash DEV=eth0 RATE_MAIN=2048kbit CEIL_MAIN=2048kbit BURST=1b CBURST=1b RATE_DEFAULT=1024kbit CEIL_DEFAULT=$CEIL_MAIN PRIO_DEFAULT=3 RATE_P2P=1024Kbit CEIL_P2P=$CEIL_MAIN PRIO_P2P=4 RATE_IND=32kbit CEIL_IND=$CEIL_DEFAULT tc qdisc del dev $DEV root tc qdisc add dev $DEV root handle 1: htb default 30 tc class add dev $DEV parent 1: classid 1:1 htb rate $RATE_MAIN ceil $CEIL_MAIN tc class add dev $DEV parent 1:1 classid 1:10 htb rate $RATE_DEFAULT ceil $CEIL_MAIN burst $BURST cburst $CBURST prio $PRIO_WEB ## some other sub class for p2p other traffic tc class add dev $DEV parent 1:1 classid 1:20 htb rate $RATE_P2P ceil $CEIL_P2P burst $BURST cburst $CBURST prio $PRIO_P2P $IPS_NET1=50 $IPS_NET2=100 let $IPS=$IPS_NET1+$IPS_NET2 for ((i=1; i<= $IPS; i++)) do let CLASSID=($i+100) let HANDLE=($i+100) tc class add dev $DEV parent 1:10 classid 1:$CLASSID htb rate $RATE_IND ceil $CEIL_IND tc qdisc add dev $DEV parent 1:$CLASSID handle $HANDLE: sfq perturb 10 done ## Generate IP addresses ## IP_ADDRESSES="" # Subnet A BASE_IP=10.10.10. for ((i=2; i<=$IPS_NET1+1; i++)) do TEMP="$BASE_IP$i" IP=ADDRESSES="$IP_ADDRESSES $TEMP" done # Subnet B BASE_IP=192.168.0. for ((i=2; i<=$IPS_NET2+1; i++)) do TEMP="$BASE_IP$i" IP_ADDRESSES="$IP_ADDRESSES $TEMP" done ## FILTERS ## j=1 U32="tc filter add dev $DEV protocol ip parent 1:0 prio $PRIO_DEFAULT u32" for NET in $IP_ADDRESSES; do let CLASSID=($j+100) $U32_DEFAULT match ip src $NET/32 flowid 1:$CLASSID $U32_DEFAULT match ip dst $NET/32 flowid 1:$CLASSID let j=j+1 done Can you guys help me figure out what's wrong with it? basically I want my classes to be 1:1 (1.5 Mbit ) 1:10 (1024 Kbit) 1:20 (1024 Kbit) (200 ips each with 32 kbit)

  Read the article

• Can't install NPM after installing Node on EC2 Linux instance?

  - by frequent

  I'm trying my first attempt on getting a node server set up on an amazon ec2 linux instance. I think I made it quite far. First problem I ran into was when trying to make Node the connection timed out after a while, so I need three attempts until I got this: LINK(target) /home/ec2-user/node/out/Release/node: Finished touch /home/ec2-user/node/out/Release/obj.target/node_dtrace_header.stamp touch /home/ec2-user/node/out/Release/obj.target/node_dtrace_provider.stamp touch /home/ec2-user/node/out/Release/obj.target/node_dtrace_ustack.stamp touch /home/ec2-user/node/out/Release/obj.target/node_etw.stamp make[1]: Leaving directory `/home/ec2-user/node/out' ln -fs out/Release/node node Which tells me, "Node is done", although I'm not sure it is also working as it should. Following this,this and this tutorial, I'm now stuck at installing npm. I think I first cloned into the wrong folder, which always gave me error 127, but even if I'm doing this: cd ~ git clone git://github.com/isaacs/npm.git cd npm sudo -s PATH=/usr/local/bin:$PATH make install I'm still getting this: #after cloning# make[1]: Entering directory `/root/npm' node cli.js install bash: node: command not found make[1]: *** [node_modules/.bin/ronn] Error 127 make[1]: Leaving directory `/root/npm' make: *** [man/man3/start.3] Error 2 Question:: Since I'm pretty much a newby at everything I'm trying here, can someone please tell me what I'm doing wrong and how to get npm to install? Also, in case I cloned into the wrong folder, is there a way to remove the "false clone" or is this not written to disk until I call make install and I don't need to worry? Thanks for helping out!

  Read the article

• Why is my machine unable to mount my SMB drives ("CIFS VFS: Error connecting to socket. Aborting operation", return code -115)?

  - by downbeat

  I have a machine running Precise (12.04 x64), and I cannot mount my SMB drives (I have 3, we'll call them public, private and download). It used to work (a week or two ago) and I didn't touch fstab! The machine hosting the shares is a commercial NAS, and I'm not seeing anything that would indicate it's an issue with the NAS. I have an older machine which I updated to Precise at the same time (both fresh installed, not dist-upgrade), so should have a very similar configuration. It is not having any problems. I am not having problems on windows machines/partitions either, only one of my Precise machines. The two machines are using identical entries in fstab and identical /etc/samba/smb.conf files. I don't think I've ever changed smb.conf (has never mattered before). My fstab entries all basically look like this: //10.1.1.111/public /media/public cifs credentials=/home/downbeat/.credentials,iocharset=utf8,uid=downbeat,gid=downbeat,file_mode=0644,dir_mode=0755 0 0 Here's the dmesg output on boot: [ 51.162198] CIFS VFS: Error connecting to socket. Aborting operation [ 51.162369] CIFS VFS: cifs_mount failed w/return code = -115 [ 51.194106] CIFS VFS: Error connecting to socket. Aborting operation [ 51.194250] CIFS VFS: cifs_mount failed w/return code = -115 [ 51.198120] CIFS VFS: Error connecting to socket. Aborting operation [ 51.198243] CIFS VFS: cifs_mount failed w/return code = -115 There are no other errors I see in the dmesg output. Originally when I ran 'testparm -s', the output contained these lines ERROR: lock directory /var/run/samba does not exist ERROR: pid directory /var/run/samba does not exist Here's the samba related programs I have installed: $ dpkg --list|grep -i samba ii libpam-winbind 2:3.6.3-2ubuntu2.3 Samba nameservice and authentication integration plugins ii libwbclient0 2:3.6.3-2ubuntu2.3 Samba winbind client library ii nautilus-share 0.7.3-1ubuntu2 Nautilus extension to share folder using Samba ii python-smbc 1.0.13-0ubuntu1 Python bindings for Samba clients (libsmbclient) ii samba-common 2:3.6.3-2ubuntu2.3 common files used by both the Samba server and client ii samba-common-bin 2:3.6.3-2ubuntu2.3 common files used by both the Samba server and client ii winbind 2:3.6.3-2ubuntu2.3 Samba nameservice integration server $ dpkg --list|grep -i smb ii dmidecode 2.11-4 SMBIOS/DMI table decoder ii libsmbclient 2:3.6.3-2ubuntu2.3 shared library for communication with SMB/CIFS servers ii python-smbc 1.0.13-0ubuntu1 Python bindings for Samba clients (libsmbclient) ii smbclient 2:3.6.3-2ubuntu2.3 command-line SMB/CIFS clients for Unix ii smbfs 2:5.1-1ubuntu1 Common Internet File System utilities - compatibility package $ dpkg --list|grep -i cifs ii cifs-utils 2:5.1-1ubuntu1 Common Internet File System utilities ii libsmbclient 2:3.6.3-2ubuntu2.3 shared library for communication with SMB/CIFS servers ii smbclient 2:3.6.3-2ubuntu2.3 command-line SMB/CIFS clients for Unix I originally noticed that my other machine had "libpam-winbind" and "nautilus-share" installed and the machine with the issue did not. Installing those two packages solved my errors with 'testparm -s', but did not fix my issue. Finally, I tried to purge and reinstall these packages smbclient smbfs cifs-utils samba-common samba-common-bin Still no luck. Again, it used to work; now it doesn't. Very similarly configured machine works (but some packages are out of date on the working machine). The NAS has only one interface/IP address, nmblookup works to find it's IP from it's hostname (from the machine with the issue) and it responds to a ping. Please any help would be great. I've been searching on AskUbuntu, SuperUser, ubuntuforums and plain old search engines for a week now and it's driving me crazy!

  Read the article

• Few events I&rsquo;m speaking at in early 2013

  - by Mladen Prajdic

  2013 has started great and the SQL community is already brimming with events. At some of these events you can come say hi. I’ll be glad you do! These are the events with dates and locations that I know I’ll be speaking at so far.   February 16th: SQL Saturday #198 - Vancouver, Canada The session I’ll present in Vancouver is SQL Impossible: Restoring/Undeleting a table Yes, you read the title right. No, it's not about the usual "one table per partition" and "restore full backup then copy the data over" methods. No, there are no 3rd party tools involved. Just you and your SQL Server. Yes, it's crazy. No, it's not for production purposes. And yes, that's why it's so much fun. Prepare to dive into the world of data pages, log records, deletes, truncates and backups and how it all works together to get your table back from the endless void. Want to know more? Come and see! This is an advanced level session where we’ll dive into the internals of data pages, transaction log records and page restores.   March 8th-9th: SQL Saturday #194 - Exeter, UK In Exeter I’ll be presenting twice. On the first day I’ll have a full day precon titled: From SQL Traces to Extended Events - The next big switch This pre-con will give you insight into both of the current tracing technologies in SQL Server. The old SQL Trace which has served us well over the past 10 or so years is on its way out because the overhead and details it produces are no longer enough to deal with today's loads. The new Extended Events are a new lightweight tracing mechanism built directly into the SQLOS thus giving us information SQL Trace just couldn't. They were designed and built with performance in mind and it shows. The new Extended Events are a new lightweight tracing mechanism built directly into the SQLOS thus giving us information SQL Trace just couldn't. They were designed and built with performance in mind and it shows. Mastering Extended Events requires learning at least one new skill: XML querying. The second session I’ll have on Saturday titled: SQL Injection from website to SQL Server SQL Injection is still one of the biggest reasons various websites and applications get hacked. The solution as everyone tells us is simple. Use SQL parameters. But is that enough? In this session we'll look at how would an attacker go about using SQL Injection to gain access to your database, see its schema and data, take over the server, upload files and do various other mischief on your domain. This is a fun session that always brings out a few laughs in the audience because they didn’t realize what can be done.   April 23rd-25th: NTK conference - Bled, Slovenia (Slovenian website only) This is a conference with history. This year marks its 18th year running. It’s a relatively large IT conference that focuses on various Microsoft technologies like .Net, Azure, SQL Server, Exchange, Security, etc… The main session’s language is Slovenian but this is slowly changing so it’s becoming more interesting for foreign attendees. This year it’s happening in the beautiful town of Bled in the Alps. The scenery alone is worth the visit, wouldn’t you agree? And this year there are quite a few well known speakers present! Session title isn’t known yet.       May 2nd-4th: SQL Bits XI – Nottingham, UK SQL Bits is the largest SQL Server conference in Europe. It’s a 3 day conference with top speakers and content all dedicated to SQL Server. The session I’ll present here is an hour long version of the precon I’ll give in Exeter. From SQL Traces to Extended Events - The next big switch The session description is the same as for the Exeter precon but we'll focus more on how the Extended Events work with only a brief overview of old SQL Trace architecture.

  Read the article

• Loading the 'pktgen' module on Ubuntu Server

  - by StackedCrooked

  I would like to enable and use the pktgen module on Ubuntu Server. I have enabed the module by adding a line containing 'pktgen' to the /etc/modules file. After rebooting it seems that the module is successfully loaded because the directory /proc/net/pktgen exists. However when trying to run the first sample I get these errors: root@ubuntu:~# bash ./pktgen.conf-1-1 Removing all devices Adding eth4 Setting max_before_softirq 10000 Configuring /proc/net/pktgen/eth4 ./pktgen.conf-1-1: line 9: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory ./pktgen.conf-1-1: line 9: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory ./pktgen.conf-1-1: line 9: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory ./pktgen.conf-1-1: line 9: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory ./pktgen.conf-1-1: line 9: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory ./pktgen.conf-1-1: line 9: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory Running... ctrl^C to stop Done It turns out the script simply unable to write a file to the /proc/net/pktgen directory. When I try this manually it fails as well: root@ubuntu:~# cd /proc/net/pktgen/ root@ubuntu:/proc/net/pktgen# touch eth4 touch: cannot touch `eth4': No such file or directory Can anyone help me make it work? I'm using Ubuntu version: 2.6.32-21-server. Fixed I apologize for keeping this post not up to date. I was able to fix it. If I remember well the cause of the error was that eth4 did not exist, or did not have the 'online' status. Anyway, it is fixed now.

  Read the article

• How can I install Satchmo?

  - by Jonathan Hayward

  I am trying to install Satchmo 0.9 on an Ubuntu 9.10 32-bit guest off of the instructions at http://bitbucket.org/chris1610/satchmo/downloads/Satchmo.pdf. I run into difficulties at 2.1.2: pip install -r http://bitbucket.org/chris1610/satchmo/raw/tip/scripts/requirements.txt pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9#egg=satchmo The first command fails because a compile error for how it's trying to build PIL. So I ran an "aptitude install python-imaging", locally copy the first line's requirements.text, and remove the line that's unsuccessfully trying to build PIL. The first line completes without reported error, as does the second. The next step tells me to change directory to the /path/to/new/store, and run: python clonesatchmo.py A little bit of trouble here; I am told that clonesatchmo.py will be in /bin by now, and it isn't there, but I put some Satchmo stuff under /usr/local, create a symlink in /bin, and run: python /bin/clonesatchmo.py This gives: jonathan@ubuntu:~/store$ python /bin/clonesatchmo.py Creating the Satchmo Application Traceback (most recent call last): File "/bin/clonesatchmo.py", line 108, in <module> create_satchmo_site(opts.site_name) File "/bin/clonesatchmo.py", line 47, in create_satchmo_site import satchmo_skeleton ImportError: No module named satchmo_skeleton A find after apparently checking out the repository reveals that there is no file with a name like satchmo*skeleton* on my system. I thought that bash might be prone to take part of the second pip invocation's URL as the beginning of a comment; I tried both: pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9\#egg=satchmo pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9#egg=satchmo Neither way of doing it seems to take care of the import error mentioned above. How can I get a Satchmo installation under Ubuntu, or at least enough of a Satchmo installation that I am able to start with a skeleton of a store and then flesh it out the way I want? Thanks, Jonathan

  Read the article

• Secure iptables config for Samba

  - by Eric

  I'm trying to setup an iptables config such that outbound connections from my CentOS 6.2 server are allowed ONLY if they are of state ESTABLISHED. Currently, the following setup is working great for sshd, but all the Samba rules get totally ignored for a reason I cannot figure out. iptables Bash script to setup ALL rules: # Remove all existing rules iptables -F # Set default chain policies iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP # Allow incoming SSH iptables -A INPUT -i eth0 -p tcp --dport 22222 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22222 -m state --state ESTABLISHED -j ACCEPT # Allow incoming Samba iptables -A INPUT -i eth0 -s 10.1.1.0/24 -p udp --dport 137:138 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -d 10.1.1.0/24 -p udp --sport 137:138 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -s 10.1.1.0/24 -p tcp --dport 139 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -d 10.1.1.0/24 -p tcp --sport 139 -m state --state ESTABLISHED -j ACCEPT # Enable these rules service iptables restart iptables rule list after running the above script: [root@repoman ~]# iptables -L Chain INPUT (policy DROP) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:22222 state NEW,ESTABLISHED Chain FORWARD (policy DROP) target prot opt source destination Chain OUTPUT (policy DROP) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp spt:22222 state ESTABLISHED Ultimately, I'm trying to restrict Samba the same way I have done for sshd. In addition, I'm trying to restrict connections to the following IP address range: 10.1.1.12 - 10.1.1.19 Can you guys offer some pointers or possibly even a full-blown solution? I've read man iptables quite extensively, so I'm not sure why the Samba rules are getting thrown out. Additionally, removing the -s 10.1.1.0/24 flags don't change the fact the rules get ignored.

  Read the article

• Commandline program to extract archives with automatic subdirectry detection

  - by ??????

  The title already says it. What I'm looking for is essentially the pure commandline counterpart to ark -ba <path> (on KDE), or file-roller -h <path> (on GNOME/Unity). Unfortunately, both ark and file-roller require X to be running. I'm aware that it is relatively simple to write a tool that detects archives based on their file extension, and then runs the appropiate program: #!/bin/bash if [[ -f "$1" ]] ; then case $1 in *.tar.bz2) tar xjvf $1 ;; *.tar.gz) tar xzvf $1 ;; *.bz2) bunzip2 $1 ;; *.rar) rar x $1 ;; *.gz) gunzip $1 ;; *.tar) tar xf $1 ;; *.tbz2) tar xjvf $1 ;; *.tgz) tar xzvf $1 ;; *.zip) unzip $1 ;; *.Z) uncompress $1 ;; *.7z) 7z x $1 ;; *) echo "'$1' cannot be extracted with this utility" ;; esac else echo "path '$1' does not exist or is not a file" fi However, that doesn't take care of subdirectory detection (and in fact, many extraction programs do not even supply such an option). So might there be a program that does exactly that? I wasn't sure whether or not to ask on askubuntu.com, because this question isn't really about Ubuntu, but rather about any Linux operating system. My apologies if this question does not fit in here.

  Read the article

• Distributing a custom command line tool to enterprise servers

  - by Jeremy Baker

  I've been tasked with building a command line tool that we will be providing to our enterprise customers so that they can use the API to upload data to our platform. The API works with standard cURL requests, so I can do most of the basic functionality with simple bash scripting, although I would like to provide something that is solid and really makes it easy for them to use and I don't know what I don't know. It's been a good 8 years since I've really done any serious sysadmin work. Most of the good tools I use these days are written in Ruby or Python and have a standard distribution process (Gems, for example). However, I know rhel and other platforms have their own package managers. Finally, the question: In today's day and age, what language / distribution method should I consider in order to cover the widest range of platforms without having to build completely different versions for each platform? I'd also love any general feedback you have about building similar projects, or links to projects that you think do a good job of this now and have open source code that I could read. Thanks in advance!

  Read the article

• Cannot connect to server via SSH

  - by Rayne

  I'm running RHEL 6.0, and I accidentally moved the /bin, /boot, /cgroup, console.txt, /data, /dev, /etc to another folder. I think I managed to move these folders back, but now I'm having trouble connecting to the server using SSH, but am able to access the server via VNC. When I tried to connect to the server using a terminal from another server, I get the error ssh_exchange_identification: Connection closed by remote host I'm currently still connected via SSH to the server (haven't closed the window yet), and am still able to access it normally. But if I try to open a new SSH terminal from my current session, I see /bin/bash: Permission denied If I try to open a new SSH File Transfer window from my current session, I get the error File transfer server could not be started or it exited unexpectedly. Exit value 0 was returned. Most likely the sftp-server is not in the path of the user on the server-side I checked and I have Subsystem sftp /usr/libexec/openssh/sftp-server which is the same path as the output of locate sftp-server Also, when I tried to restart sshd, I get the error Couldn't open /dev/null: Permission denied But my /dev/null has the permissions crw-rw-rw- for root,root. How can I resolve this? ETA: Thanks for all your help! I was able to start ssh by running the application directly /usr/sbin/sshd Even though the status of the openssh-daemon is still "stopped".

  Read the article

• Code is not the best way to draw

  - by Bertrand Le Roy

  It should be quite obvious: drawing requires constant visual feedback. Why is it then that we still draw with code in so many situations? Of course it’s because the low-level APIs always come first, and design tools are built after and on top of those. Existing design tools also don’t typically include complex UI elements such as buttons. When we launched our Touch Display module for Netduino Go!, we naturally built APIs that made it easy to draw on the screen from code, but very soon, we felt the limitations and tedium of drawing in code. In particular, any modification requires a modification of the code, followed by compilation and deployment. When trying to set-up buttons at pixel precision, the process is not optimal. On the other hand, code is irreplaceable as a way to automate repetitive tasks. While tools like Illustrator have ways to repeat graphical elements, they do so in a way that is a little alien and counter-intuitive to my developer mind. From these reflections, I knew that I wanted a design tool that would be structurally code-centric but that would still enable immediate feedback and mouse adjustments. While thinking about the best way to achieve this goal, I saw this fantastic video by Bret Victor: The key to the magic in all these demos is permanent execution of the code being edited. Whenever a parameter is being modified, everything is re-executed immediately so that the impact of the modification is instantaneously visible. If you do this all the time, the code and the result of its execution fuse in the mind of the user into dual representations of a single object. All mental barriers disappear. It’s like magic. The tool I built, Nutshell, is just another implementation of this principle. It manipulates a list of graphical operations on the screen. Each operation has a nice editor, and translates into a bit of code. Any modification to the parameters of the operation will modify the bit of generated code and trigger a re-execution of the whole program. This happens so fast that it feels like the drawing reacts instantaneously to all changes. The order of the operations is also the order in which the code gets executed. So if you want to bring objects to the front, move them down in the list, and up if you want to move them to the back: But where it gets really fun is when you start applying code constructs such as loops to the design tool. The elements that you put inside of a loop can use the loop counter in expressions, enabling crazy scenarios while retaining the real-time edition features. When you’re done building, you can just deploy the code to the device and see it run in its native environment: This works thanks to two code generators. The first code generator is building JavaScript that is executed in the browser to build the canvas view in the web page hosting the tool. The second code generator is building the C# code that will run on the Netduino Go! microcontroller and that will drive the display module. The possibilities are fascinating, even if you don’t care about driving small touch screens from microcontrollers: it is now possible, within a reasonable budget, to build specialized design tools for very vertical applications. Direct feedback is a powerful ally in many domains. Code generation driven by visual designers has become more approachable than ever thanks to extraordinary JavaScript libraries and to the powerful development platform that modern browsers provide. I encourage you to tinker with Nutshell and let it open your eyes to new possibilities that you may not have considered before. It’s open source. And of course, my company, Nwazet, can help you develop your own custom browser-based direct feedback design tools. This is real visual programming…

  Read the article

• Whitelist IP from google-authenticator in sshd pam

  - by spudwaffle

  My Ubuntu 12.04 server uses the google-authenticator pam module to provide two step authentication for ssh. I need to make it so that a certain IP does not need to type the verification code. The /etc/pam.d/sshd file is below: # PAM configuration for the Secure Shell service # Read environment variables from /etc/environment and # /etc/security/pam_env.conf. auth required pam_env.so # [1] # In Debian 4.0 (etch), locale-related environment variables were moved to # /etc/default/locale, so read that as well. auth required pam_env.so envfile=/etc/default/locale # Standard Un*x authentication. @include common-auth # Disallow non-root logins when /etc/nologin exists. account required pam_nologin.so # Uncomment and edit /etc/security/access.conf if you need to set complex # access limits that are hard to express in sshd_config. # account required pam_access.so # Standard Un*x authorization. @include common-account # Standard Un*x session setup and teardown. @include common-session # Print the message of the day upon successful login. session optional pam_motd.so # [1] # Print the status of the user's mailbox upon successful login. session optional pam_mail.so standard noenv # [1] # Set up user limits from /etc/security/limits.conf. session required pam_limits.so # Set up SELinux capabilities (need modified pam) # session required pam_selinux.so multiple # Standard Un*x password updating. @include common-password auth required pam_google_authenticator.so I've already tried adding a auth sufficient pam_exec.so /etc/pam.d/ip.sh line above the google-authenticator line, but I can't understand how to check an IP adress in the bash script.

  Read the article

• tomcat 5.5 startup script on Ubuntu server

  - by Registered User

  Can any one share their Tomcat startup script I am looking for a tomcat start up script on a Ubuntu machine. My Ubuntu is 10.04 server. The tomcat is 5.5.30. It is in /opt/apache-tomcat-5.5.31 I tried a script #!/bin/bash # # tomcat # # chkconfig: # description: Start up the Tomcat servlet engine. # Source function library. . /lib/lsb/init-functions RETVAL=$? CATALINA_HOME="/opt/apache-tomcat-5.5.31" case "$1" in start) if [ -f $CATALINA_HOME/bin/startup.sh ]; then echo $"Starting Tomcat" /opt/apache-tomcat-5.5.31/bin/startup.sh fi ;; stop) if [ -f $CATALINA_HOME/bin/shutdown.sh ]; then echo $"Stopping Tomcat" /opt/apache-tomcat-5.5.31/bin/shutdown.sh fi ;; *) echo $"Usage: $0 {start|stop}" exit 1 ;; esac exit $RETVAL but it did not worked after a reboot. But the same script works if I do /etc/init.d/tomcat start or /etc/init.d/tomcat stop I have done update-rc.d tomcat defaults as it is a Ubuntu server but on reboot all of this fails to work.

  Read the article

• Rebooting access point via SSH with pexpect... hangs. Any ideas?

  - by MiniQuark

  When I want to reboot my D-Link DWL-3200-AP access point from my bash shell, I connect to the AP using ssh and I just type reboot in the CLI interface. After about 30 seconds, the AP is rebooted: # ssh [email protected] [email protected]'s password: ******** Welcome to Wireless SSH Console!! ['help' or '?' to see commands] Wireless Driver Rev 4.0.0.167 D-Link Access Point wlan1 -> reboot Sound's great? Well unfortunately the ssh client process never exits, for some reason (maybe the AP kills the ssh server a bit too fast, I don't know). My ssh client process is completely blocked (even if I wait for several minutes, nothing happens). I always have to wait for the AP to reboot, then open another shell, find the ssh client process ID (using ps aux | grep ssh) then kill the ssh process using kill <pid>. That's quite annoying. So I decided to write a python script to reboot the AP. The script connects to the AP's CLI interface via ssh, using python-pexpect, and it tries to launch the "reboot" command. Here's what the script looks like: #!/usr/bin/python # usage: python reboot_ap.py {host} {user} {password} import pexpect import sys import time command = "ssh %(user)s@%(host)s"%{"user":sys.argv[2], "host":sys.argv[1]} session = pexpect.spawn(command, timeout=30) # start ssh process response = session.expect(r"password:") # wait for password prompt session.sendline(sys.argv[3]) # send password session.expect(" -> ") # wait for D-Link CLI prompt session.sendline("reboot") # send the reboot command time.sleep(60) # make sure the reboot has time to actually take place session.close(force=True) # kill the ssh process The script connects properly to the AP (I tried running some other commands than reboot, they work fine), it sends the reboot command, waits for one minute, then kills the ssh process. The problem is: this time, the AP never reboots! I have no idea why. Any solution, anyone?

  Read the article

• start-stop-daemon can't find executable that's right in front of it

  - by Bart van Heukelom

  root@mountain-lion:/opt/smartfox# ls -lha total 180K drwxr-xr-x 8 root root 4.0K 2012-06-01 14:09 . drwxr-xr-x 4 root root 4.0K 2012-06-01 09:41 .. drwxr-xr-x 8 root root 4.0K 2009-05-17 21:57 lib lrwxrwxrwx 1 root root 22 2012-06-01 09:41 logs -> /var/opt/smartfox/logs -rwxr-xr-x 1 root root 1.4K 2012-06-01 14:28 run.sh root@mountain-lion:/opt/smartfox# cat run.sh #!/bin/bash java -cp "./:./sfsExtensions/:lib/activation.jar:lib/commons-beanutils.jar:lib/commons-collections-3.2.jar:lib/commons-dbcp-1.2.1.jar:lib/commons-lang-2.3.jar:lib/commons-logging-1.1.jar:lib/commons-pool-1.2.jar:lib/concurrent.jar:lib/ezmorph-1.0.3.jar:lib/h2.jar:lib/js.jar:lib/json-lib-2.1-jdk15.jar:lib/json.jar:lib/jsr173_1.0_api.jar:lib/jysfs.jar:lib/jython.jar:lib/nanoxml-2.2.1.jar:lib/wrapper.jar:lib/xbean.jar:lib/javamail/imap.jar:lib/javamail/mailapi.jar:lib/javamail/pop3.jar:lib/javamail/smtp.jar:lib/jetty/jetty.jar:lib/jetty/jetty-util.jar:lib/jetty/jstl.jar:lib/jetty/multipartrequest.jar:lib/jetty/servlet-api.jar:lib/jetty/standard.jar:lib/jsp-2.1/commons-el-1.0.jar:lib/jsp-2.1/core-3.1.0.jar:lib/jsp-2.1/jsp-2.1.jar:lib/jsp-2.1/jsp-api-2.1.jar:lib/jsp-2.1/jstl.jar:lib/jsp-2.1/standard.jar:lib/lsc.jar:lib/commons-io-1.4.jar" \ it.gotoandplay.smartfoxserver.SmartFoxServer > logs/smartfox.out 2>&1 & JAVAPID=$! echo "Started Smartfox. JVM PID = $JAVAPID" trap "echo Stopping Smartfox.; kill $JAVAPID" INT TERM wait echo "Smartfox stopped." root@mountain-lion:/opt/smartfox# start-stop-daemon --start --make-pidfile --pidfile /var/opt/smartfox/smartfox.pid --exec ./run.sh start-stop-daemon: unable to start ./run.sh (No such file or directory) Why can't start-stop-daemon find the script?

  Read the article

• update all the servers through one virtual servers using Storage are network virtual machine

  - by Mr.Calm

  Using UBUNTU and Virtal Box by Oracle, and Using this script to start nginx in Virtual Box, and placing it in Virtual box inside~/init.d #!/bin/bash ### BEGIN INIT INFO # Provides: Testinit # Required-Start: # Required-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Start daemon at boot time # Description: Enable service provided by daemon. ### END INIT INFO # RETVAL=0; start() { CurrentTime=$(date +%d/%m/%Y"-"%I:%M:%S) ./usr/local/nginx/sbin/nginx echo "Current Time:"$CurrentTime>>/home/server/Desktop/NginxLogs.txt echo "!Starting nginx!" >>/home/server/Desktop/NginxLogs.txt Like this i want to write auto script (setup.sh file) and place that script in all virtual boxes inside my system, for example 8 virtual boxes and in all Virtual boxes NGINX is installed. Now, The thing is i am facing problem when i want change something in setup.sh i have to go to each and every virtual box, or Communicate each Virtual machine through SSH from my main machine. i am thinking to write another script (ex: Update.sh),and inside that script we give one path of file which is saved and recently edited in main machine (ex: DummySetup.sh). as soon as i run that script all the setup.sh files which are saved in each virtual machines should update the change or replace contents with DummySetup.sh's contents. Hope this is possible thing. Help would be appreciated.Thanking you

  Read the article

• copSSH and cygwin - Can't use windows style paths

  - by DrFredEdison

  I setup copSSH on one of my windows servers, and within the copSSH bash shell, I can't seem to use windows-style paths to remove and copy files. If I do try, I get the following: $ /bin/cp -r C:/Domains/_temp/collage_push/* C:/Domains/collage/ cygwin warning: MS-DOS style path detected: C:/Domains/_temp/collage_push/ Preferred POSIX equivalent is: /cygdrive/c/Domains/_temp/collage_push/ CYGWIN environment variable option "nodosfilewarning" turns off this warning. Consult the user's guide for more details about POSIX paths: http://cygwin.com/cygwin-ug-net/using.html#using-pathnames I have created a windows environment variable CYGWIN set to nodosfilewarning. It has no effect. I added export CYGWIN=nodosfilewarning to my .bashrc and doing a echo $CYGWIN in my ssh session confirms it is indeed getting set; yet again, it has no effect finally, I noted that when not doing my own export that CYGWIN contains "nontsec binmode" (no quotes), so I tried: export CYGWIN="nodosfilewarning nontsec binmode" in my .bashrc and still no dice. Older versions of CopSSH didn't have this issue. How can I actually override this error? I have a lot of scripts that already use windows-style paths, and I'd rather not change them if possible.

  Read the article

• How do I troubleshoot a segfault in Ubuntu that occurs when typing a bogus command?

  - by Alan

  We've got a production server running Ubuntu 11.10. We're encountering segfaults that appear under various conditions. The simplest reproducible case is when we login to an ssh session as our administrative user and enter a bogus command. You'd expect the standard "command not found" error message. Instead, we get a segfault in python. The user's default shell is /bin/bash. For example: $ asdf Segmentation fault Info from /var/log/syslog: Jul 6 15:39:20 PROD001 kernel: [2155960.605695] python[7873]: segfault at 0 ip (null) sp 00007fffd030b808 error 14 in python2.7[400000+233000] Some details about the server: $ uname -a Linux PROD001 3.0.0-16-server #29-Ubuntu SMP Tue Feb 14 13:08:12 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ cat /etc/issue Ubuntu 11.10 \n \l Before we ask the IT department to reinstall the O.S., I'd like to understand what got us here. The system and/or this particular user's environment is suspect. Many people have touched this server over the past year, so I'm wondering if it is missing libraries, incorrectly installed packages, etc. I'm hoping that if we can understand what's going wrong in this case, it will help explain why we're getting segfaults in a couple of other scenarios. Any tips on troubleshooting this segfault will be appreciated!

  Read the article

• Getting a TTY in a Connectback Shell

  - by Asad R.

  I'm often asked by friends to help with small Linux problems, and more often than not I'm required to login to the remote system. Usually there are a lot of issues with making an account and logging in (sometimes the box is behind a NAT device, sometimes SSHD isn't installed, etc.) so I usually just ask them to make a connect-back shell using netcat (nc -e /bin/bash ). If they don't have netcat I can just ask them to grab a copy of a statically compiled binary which isn't that hard or time consuming to download and run. Though this works well enough for me to enter simple commands, I can't run any apps that require a tty (vi, for example) and can't use any job control functions. I managed to bypass this issue by running in.telnetd with a few arguments within the connect-back shell that would assign me a terminal and drop me to a shell. Unfortunately in.telnetd isn't usually installed by default on most systems. What's the easiest way to get a fully functional connect-back terminal shell without requiring any non-standard packages? (A small C program that does the job would be fine as well, I just can't seem to find much documentation on how a TTY is assigned/allocated. A solution that doesn't require me to plough through the source code for SSHD and TELNETD would be nice :))

  Read the article

• USB To Serial under OpenSuse 11.3

  - by Exsisto

  I have a LogiLink USB-To-Serial adapter. This has the PL2303 chip inside. When I insert the device: [26064.927083] usb 7-1: new full speed USB device using uhci_hcd and address 9 [26065.076090] usb 7-1: New USB device found, idVendor=067b, idProduct=2303 [26065.076099] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [26065.076105] usb 7-1: Product: USB-Serial Controller [26065.076110] usb 7-1: Manufacturer: Prolific Technology Inc. [26065.079181] pl2303 7-1:1.0: pl2303 converter detected [26065.091296] usb 7-1: pl2303 converter now attached to ttyUSB0 So the device is recognized and the converter is attached to ttyUSB0. When I do screen /dev/ttyUSB0 9600 I get the error: bash: /dev/ttyUSB0: Permission denied So I went looking in the file permissions. ls -l from the /dev folder reports: crw-rw---- 1 root dialout 188, 0 2011-04-26 15:47 ttyUSB0 I added my user lars to the dialout group. When I use the commands groups under lars it shows that I'm in the group. Though I still recieve the permissions denied error, as lars, and as root. I'm trying to connect to a console cable to configure some Cisco switches. My OS is OpenSuse 11.3 x86_64 with kernel version 2.6.34.7-0.7-desktop.

  Read the article

• How can a Linux Administrator improve their shell scripting and automation skills?

  - by ewwhite

  In my organization, I work with a group of NOC staff, budding junior engineers and a handful of senior engineers; all with a focus on Linux. One interesting step in the way the company grows talent is that there's a path from the NOC to the senior engineering ranks. Viewing the talent pool as a relative newcomer, I see that there's a split in the skill sets that tends to grow over time... There are engineers who know one or several particular technologies well and are constantly immersed... e.g. MySQL, firewalls, SAN storage, load balancers... There are others who are generalists and can navigate multiple technologies. All learn enough Linux (commands, processes) to do what they need and use on a daily basis. A differentiating factor between some of the staff is how well they embrace scripting, automation and configuration management methodologies. For instance, we have two engineers who do the bulk of Amazon AWS CloudFormation work, and another who handles most of the Puppet infrastructure. Perhaps a quarter of the engineers are adept at BASH shell scripting. Looking at this in the context of the incredibly high demand for DevOps skills in the job market, I'm curious how other organizations foster the development of these skills and grow their internal talent. Scripting doesn't seem like a particularly-teachable concept. How does a sysadmin improve their shell scripting? Is there still a place for engineers who do not/cannot keep up in the DevOps paradigm? Are we simply to assume that some people will be left behind as these technologies evolve? Is that okay?

  Read the article

• Chmod 644 on /etc/ any way to fix?

  - by DazSlayer

  I tried to tab complete something and I guess it wasnt there. I know you are not supposed to set the permissions to /etc/ like that, but my permissions seem to be all messed up. whoami prints out cannot find name for user ID 1002 and I cannot cd into /etc/ anymore. passwd and shadow use 640 and 644 so I am not sure why this is a problem. Regardless, is there any way to fix this? The command run was sudo chmod 644 /etc/ I have no name!@vpn-server:/$ whoami whoami: cannot find name for user ID 1002 I have no name!@vpn-server:/$ cd etc bash: cd: etc: Permission denied I have no name!@vpn-server:/$ ls -al etc d????????? ? ? ? ? ? . d????????? ? ? ? ? ? .. d????????? ? ? ? ? ? acpi -????????? ? ? ? ? ? adduser.conf I have no name!@vpn-server:/$ sudo su sudo: can't open /etc/sudoers: Permission denied

  Read the article

• Removing SCIM input method as default from gnome terminal

  - by Mark

  Hello - I am recently back into the Linux world after about a 10 year absence. While I can find my way around most things, terminals and desktop managers are different than I remember. One of the biggest problems that I am encountering today is that when running a gnome terminal (this is Suse 10.0 enterprise), I'm getting behavior in the window that I don't want. Specifically, when I type, my typing is underlined as if something is trying to spell check my window. Further, it seems as if when running vi or less, my keystrokes are only processed by these apps when I hit 'return'. I.e. if I'm running less and want to go back a page, I'll hit b, but nothing happens until I hit 'return'. I seem to have tracked this down to the 'input method". Right clicking in the Gnome terminal allows me to set my input method to one of a dozen values. It seems that currently, it's set to "SCIM Input Method". If I then select 'default' or 'X Input Method', apps (i.e. things like less, vi, and even the bash shell) behave as I would expect. Can someone tell me a) what is this SCIM input method b) how can I make it so that it is not the default? I've poked around various configuration files in my home directory as well as in /etc, but I can't see to find how this is set. I guess as a final question, can I just get rid of SCIM? Or is that tied into the window manager somehow? I do appreciate any clarifications that I can get. Thanks.

  Read the article

• Problem using a public key when connecting to a SSH server running on Cygwin

  - by binary255

  We have installed Cygwin on a Windows Server 2008 Standard server and it working pretty well. Unfortunately we still have a big problem. We want to connect using a public key through SSH which doesn't work. It always falls back to using password login. We have appended our public key to ~/.ssh/authorized_keys on the server and we have our private and public key in ~/.ssh/id_dsa respective ~/.ssh/id_dsa.pub on the client. When debugging the SSH login session we see that the key is offered by the server apparently rejects it by some unknown reason. The SSH output when connecting from an Ubuntu 9.10 desktop with debug information enabled: $ ssh -v 192.168.10.11 OpenSSH_5.1p1 Debian-6ubuntu2, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /home/myuseraccount/.ssh/config debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for debug1: Connecting to 192.168.10.11 [192.168.10.11] port 22. debug1: Connection established. debug1: identity file /home/myuseraccount/.ssh/identity type -1 debug1: identity file /home/myuseraccount/.ssh/id_rsa type -1 debug1: identity file /home/myuseraccount/.ssh/id_dsa type 2 debug1: Checking blacklist file /usr/share/ssh/blacklist.DSA-1024 debug1: Checking blacklist file /etc/ssh/blacklist.DSA-1024 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '192.168.10.11' is known and matches the RSA host key. debug1: Found key in /home/myuseraccount/.ssh/known_hosts:12 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Offering public key: /home/myuseraccount/.ssh/id_dsa debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Trying private key: /home/myuseraccount/.ssh/identity debug1: Trying private key: /home/myuseraccount/.ssh/id_rsa debug1: Next authentication method: keyboard-interactive debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: password [email protected]'s password: The version of Cygwin: $ uname -a CYGWIN_NT-6.0 servername 1.7.1(0.218/5/3) 2009-12-07 11:48 i686 Cygwin The installed packages: $ cygcheck -c Cygwin Package Information Package Version Status _update-info-dir 00871-1 OK alternatives 1.3.30c-10 OK arj 3.10.22-1 OK aspell 0.60.5-1 OK aspell-en 6.0.0-1 OK aspell-sv 0.50.2-2 OK autossh 1.4b-1 OK base-cygwin 2.1-1 OK base-files 3.9-3 OK base-passwd 3.1-1 OK bash 3.2.49-23 OK bash-completion 1.1-2 OK bc 1.06-2 OK bzip2 1.0.5-10 OK cabextract 1.1-1 OK compface 1.5.2-1 OK coreutils 7.0-2 OK cron 4.1-59 OK crypt 1.1-1 OK csih 0.9.1-1 OK curl 7.19.6-1 OK cvs 1.12.13-10 OK cvsutils 0.2.5-1 OK cygrunsrv 1.34-1 OK cygutils 1.4.2-1 OK cygwin 1.7.1-1 OK cygwin-doc 1.5-1 OK cygwin-x-doc 1.1.0-1 OK dash 0.5.5.1-2 OK diffutils 2.8.7-2 OK doxygen 1.6.1-2 OK e2fsprogs 1.35-3 OK editrights 1.01-2 OK emacs 23.1-10 OK emacs-X11 23.1-10 OK file 5.04-1 OK findutils 4.5.5-1 OK flip 1.19-1 OK font-adobe-dpi75 1.0.1-1 OK font-alias 1.0.2-1 OK font-encodings 1.0.3-1 OK font-misc-misc 1.1.0-1 OK fontconfig 2.8.0-1 OK gamin 0.1.10-10 OK gawk 3.1.7-1 OK gettext 0.17-11 OK gnome-icon-theme 2.28.0-1 OK grep 2.5.4-2 OK groff 1.19.2-2 OK gvim 7.2.264-1 OK gzip 1.3.12-2 OK hicolor-icon-theme 0.11-1 OK inetutils 1.5-6 OK ipc-utils 1.0-1 OK keychain 2.6.8-1 OK less 429-1 OK libaspell15 0.60.5-1 OK libatk1.0_0 1.28.0-1 OK libaudio2 1.9.2-1 OK libbz2_1 1.0.5-10 OK libcairo2 1.8.8-1 OK libcurl4 7.19.6-1 OK libdb4.2 4.2.52.5-2 OK libdb4.5 4.5.20.2-2 OK libexpat1 2.0.1-1 OK libfam0 0.1.10-10 OK libfontconfig1 2.8.0-1 OK libfontenc1 1.0.5-1 OK libfreetype6 2.3.12-1 OK libgcc1 4.3.4-3 OK libgdbm4 1.8.3-20 OK libgdk_pixbuf2.0_0 2.18.6-1 OK libgif4 4.1.6-10 OK libGL1 7.6.1-1 OK libglib2.0_0 2.22.4-2 OK libglitz1 0.5.6-10 OK libgmp3 4.3.1-3 OK libgtk2.0_0 2.18.6-1 OK libICE6 1.0.6-1 OK libiconv2 1.13.1-1 OK libidn11 1.16-1 OK libintl3 0.14.5-1 OK libintl8 0.17-11 OK libjasper1 1.900.1-1 OK libjbig2 2.0-11 OK libjpeg62 6b-21 OK libjpeg7 7-10 OK liblzma1 4.999.9beta-10 OK libncurses10 5.7-18 OK libncurses8 5.5-10 OK libncurses9 5.7-16 OK libopenldap2_3_0 2.3.43-1 OK libpango1.0_0 1.26.2-1 OK libpcre0 8.00-1 OK libpixman1_0 0.16.6-1 OK libpng12 1.2.35-10 OK libpopt0 1.6.4-4 OK libpq5 8.2.11-1 OK libreadline6 5.2.14-12 OK libreadline7 6.0.3-2 OK libsasl2 2.1.19-3 OK libSM6 1.1.1-1 OK libssh2_1 1.2.2-1 OK libssp0 4.3.4-3 OK libstdc++6 4.3.4-3 OK libtiff5 3.9.2-1 OK libwrap0 7.6-20 OK libX11_6 1.3.3-1 OK libXau6 1.0.5-1 OK libXaw3d7 1.5D-8 OK libXaw7 1.0.7-1 OK libxcb-render-util0 0.3.6-1 OK libxcb-render0 1.5-1 OK libxcb1 1.5-1 OK libXcomposite1 0.4.1-1 OK libXcursor1 1.1.10-1 OK libXdamage1 1.1.2-1 OK libXdmcp6 1.0.3-1 OK libXext6 1.1.1-1 OK libXfixes3 4.0.4-1 OK libXft2 2.1.14-1 OK libXi6 1.3-1 OK libXinerama1 1.1-1 OK libxkbfile1 1.0.6-1 OK libxml2 2.7.6-1 OK libXmu6 1.0.5-1 OK libXmuu1 1.0.5-1 OK libXpm4 3.5.8-1 OK libXrandr2 1.3.0-10 OK libXrender1 0.9.5-1 OK libXt6 1.0.7-1 OK links 1.00pre20-1 OK login 1.10-10 OK luit 1.0.5-1 OK lynx 2.8.5-4 OK man 1.6e-1 OK minires 1.02-1 OK mkfontdir 1.0.5-1 OK mkfontscale 1.0.7-1 OK openssh 5.4p1-1 OK openssl 0.9.8m-1 OK patch 2.5.8-9 OK patchutils 0.3.1-1 OK perl 5.10.1-3 OK rebase 3.0.1-1 OK run 1.1.12-11 OK screen 4.0.3-5 OK sed 4.1.5-2 OK shared-mime-info 0.70-1 OK tar 1.22.90-1 OK terminfo 5.7_20091114-13 OK terminfo0 5.5_20061104-11 OK texinfo 4.13-3 OK tidy 041206-1 OK time 1.7-2 OK tzcode 2009k-1 OK unzip 6.0-10 OK util-linux 2.14.1-1 OK vim 7.2.264-2 OK wget 1.11.4-4 OK which 2.20-2 OK wput 0.6.1-2 OK xauth 1.0.4-1 OK xclipboard 1.1.0-1 OK xcursor-themes 1.0.2-1 OK xemacs 21.4.22-1 OK xemacs-emacs-common 21.4.22-1 OK xemacs-sumo 2007-04-27-1 OK xemacs-tags 21.4.22-1 OK xeyes 1.1.0-1 OK xinit 1.2.1-1 OK xinput 1.5.0-1 OK xkbcomp 1.1.1-1 OK xkeyboard-config 1.8-1 OK xkill 1.0.2-1 OK xmodmap 1.0.4-1 OK xorg-docs 1.5-1 OK xorg-server 1.7.6-2 OK xrdb 1.0.6-1 OK xset 1.1.0-1 OK xterm 255-1 OK xz 4.999.9beta-10 OK zip 3.0-11 OK zlib 1.2.3-10 OK zlib-devel 1.2.3-10 OK zlib0 1.2.3-10 OK The ssh deamon configuration file: $ cat /etc/sshd_config # $OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/bin:/usr/sbin:/sbin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. Port 22 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # Disable legacy (protocol version 1) support in the server for new # installations. In future the default will change to require explicit # activation of protocol 1 Protocol 2 # HostKey for protocol version 1 #HostKey /etc/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh_host_rsa_key #HostKey /etc/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 1024 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes StrictModes no #MaxAuthTries 6 #MaxSessions 10 RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. #UsePAM no AllowAgentForwarding yes AllowTcpForwarding yes GatewayPorts yes X11Forwarding yes X11DisplayOffset 10 X11UseLocalhost no #PrintMotd yes #PrintLastLog yes TCPKeepAlive yes #UseLogin no UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner none # override default of no subsystems Subsystem sftp /usr/sbin/sftp-server # Example of overriding settings on a per-user basis #Match User anoncvs #X11Forwarding yes #AllowTcpForwarding yes #ForceCommand cvs server I hope this information is enough to solve the problem. In case any more is needed please comment and I'll add it. Thank you for reading!

  Read the article

• Motorola Droid App Recommendations

  - by Brian Jackett

  Just as a disclaimer, the views and opinions expressed in this post are solely my own and I’m not getting paid or compensated for anything.     Ok, so I’m one of the crazy few who went out and bought a Droid the week it was released a few months back.  The Motorola Droid was a MAJOR upgrade in phone capabilities for me as my previous phone had no GPS, no web access, limited apps, etc.  I now use my Droid for so much of my life from work to personal to community based events.  Since I’ve been using my Droid for awhile, a number of friends (@toddklindt, @spmcdonough, @jfroushiii, and many more) who later got a Droid asked me which apps I recommended.  While there are a few sites on the web listing out useful Android apps, here’s my quick list (with a few updates since first put together.) Note: * denotes a highly recommended app     Android App Recommendations for Motorola Droid (Updated after 2.1 update) RemoteDroid – install a thin client on another computer and Droid becomes mouse pad / keyboard, control computer remotely PdaNet – free version allows tethering (only to HTTP, no HTTPS) without paying extra monthly charge.  A paid version allows HTTPS access. SportsTap – keep track of about a dozen sports, favorite teams, etc *Movies – setup favorite theaters, find movie times, buy tickets, etc WeatherBug elite – paid app, but gives weather alerts, 4 day forecast, etc.  Free version also exists.  (Update: Android 2.1 offers free weather app, but I still prefer WeatherBug.) *Advanced Task Killer – manually free up memory and kill apps not needed Google Voice – have to have a Google Voice account to really use, but allows visual voice mail, sending calls to specific phones, and too many other things to list AndroZip – access your phone memory like a file system Twidroid – best Twitter client I’ve found so far, but personal preference varies.  I’m using free version and suits me just fine. Skype (beta) – I only use this to send chat messages, not sure how/if phone calls works on this. (Update: Skype Mobile app just released, but uninstalled after few days as it kept launching in background and using up memory when not wanted.) *NewsRob – RSS reader syncs to Google Reader.  I use this multiple times a day, excellent app. (Update: this app does ask for your Google username and password, so security minded folks be cautioned.) ConnectBot – don’t use often myself, but allows SSH into remote computer.  Great if you have a need for remote manage server. Speed Test – same as the online website, allows finding upload/download speeds. WiFinder – store wifi preferences and find wifi spots in area. TagReader – simple Microsoft Tag Reader, works great. *Google Listen – audible podcast catcher that allows putting items into a queue, sync with Google Reader RSS, etc. I personally love this app which has now replaced the iPod I used to use in my car, but have heard mixed reviews from others. Robo Defense – (paid app) tower defense game but with RPG elements to upgrade towers over lifetime playing. I’ve never played FieldRunners but I’m told very similar in offering. Nice distraction when in airport or have some time to burn. Phit Droid 3rd Edition – drag and drop block shapes into a rectangle box, simple game to pass the time with literally 1000s of levels. Note this game has been updated dozens of times with numerous editions so unsure exactly which are still on the market. Google Sky Map – impress your friends by holding Droid up to sky and viewing constellations using Droid screen. wootCheck Lite – check up on daily offerings on Woot.com and affiliated wine, sellout, shirt, and kids sites.   Side notes: I’ve seen that Glympse and TripIt have recently come out with Android apps.  I’ve installed but haven’t gotten to use either yet, but I hear good things.  Will try out on 2 upcoming trips in May and update with impressions.         -Frog Out   Image linked from http://images.tolmol.com/images/grpimages/200910191814100_motorola-droid.gif

  Read the article

< Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >