stateful session bean - Page 173

Is LINQ to objects a collection of combinators?

- by Jimmy Hoffa

I was just trying to explain the usefulness of combinators to a colleague and I told him LINQ to objects are like combinators as they exhibit the same value, the ability to combine small pieces to create a single large piece. Though I don't know that I can call LINQ to objects combinators. I've seen 2 levels of definition for combinator that I generalize as such: A combinator is a function which only uses things passed to it A combinator is a function which only uses things passed to it and other standard atomic functions but not state The first is very rigid and can be seen in the combinatory calculus systems and in haskell things like $ and . and various similar functions meet this rule. The second is less rigid and would allow something like sum as it uses the + function which was not passed in but is standard and not stateful. Though the LINQ extensions in C# use state in their iteration models, so I feel I can't say they're combinators. Can someone who understands the definition of a combinator more thoroughly and with more experience in these realms give a distinct ruling on this? Are my definitions of 'combinator' wrong to begin with?

Read the article

Constructs for wrapping a hardware state machine

- by Henry Gomersall

I am using a piece of hardware with a well defined C API. The hardware is stateful, with the relevant API calls needing to be in the correct order for the hardware to work properly. The API calls themselves will always return, passing back a flag that advises whether the call was successful, or if not, why not. The hardware will not be left in some ill defined state. In effect, the API calls advise indirectly of the current state of the hardware if the state is not correct to perform a given operation. It seems to be a pretty common hardware API style. My question is this: Is there a well established design pattern for wrapping such a hardware state machine in a high level language, such that consistency is maintained? My development is in Python. I ideally wish the hardware state machine to be abstracted to a much simpler state machine and wrapped in an object that represents the hardware. I'm not sure what should happen if an attempt is made to create multiple objects representing the same piece of hardware. I apologies for the slight vagueness, I'm not very knowledgeable in this area and so am fishing for assistance of the description as well!

Read the article

June is going to be a busy month!

- by Monica Kumar

Who says things slow down in summer? Well, maybe for school kids, but certainly not for Oracle's Virtualization team! June is turning out to be one of the busiest months for us. We are going to be participating in a number of industry events. If you happen to be at any of these, please stop by the Oracle booth and our session/s. Let's go through a run down of these events. 1. 13th Annual Call Center Week June 4-8 Ceasar's Palace, Las Vegas Event website You're now wondering...why are we at this call center show. It's really simple, Oracle's Desktop Virtualization solutions offer the best way for call center to reliably and securely access enterprise apps using a variety of endpoint devices such as an iPad or a Sun Ray Client. Provisioning new employees becomes a breeze. We'll be jointly showcasing our solution with Oracle's CRM team. Come check us out. 2. Gartner Infrastructure & Management, Florida June 5-7 Orlando, FL Event website Oracle is a Premier sponsor of the Gartner IOM Summit this June 5 – 7, 2012 in Orlando, FL. Attendees will have the opportunity to meet with Oracle experts in a variety of sessions, including demonstrations during the showcase receptions. 3. Cloud Expo East Check out our website for details of our participation. Stop by at booth 511 to talk to our Cloud, Virtualization and Big Data experts. In addition, we're delivering a number of sessions at Cloud Expo. The one I want to highlight is the following: Session: Borderless Applications in the Cloud with Oracle VM and Oracle Virtual Assembly Builder Abstract: As virtualization adoption progresses beyond server consolidation, this is also transforming how enterprise applications are deployed and managed in an agile environment. The traditional method of business-critical application deployment where administrators have to contend with an array of unrelated tools, custom scripts to deploy and manage applications, OS and VM instances into a fast changing cloud computing environment can no longer scale effectively to achieve response time and desired efficiency. Oracle VM and Oracle Virtual Assembly Builder allow applications, associated components, deployment metadata, management policies and best practices to be encapsulated into ready-to-run VMs for rapid, repeatable deployment and ease of management. Join us in this Cloud Expo session to see how Oracle VM and Oracle Virtual Assembly Builder allow you to deploy complex multi-tier applications in minutes and enables you to easily onboard existing applications to cloud environments. Get your free Cloud Expo pass now! We're offering complimentary VIP Gold Passes. Go to https://www.blueskyz.com/v3/Login.aspx?ClientID=19&EventID=56&sg=177, click “Continue” if you are a New User or log-in if you have already created an account. Once there, you can view the Agenda or Register for Cloud Expo. To register - fill out the basic business card questions and then enter oracleVIPgold in the Priority Code field to change the price from $2,000 to $0. 4. CiscoLive 2012 June 10-14 San Diego, CA Event website Our Oracle VM and Oracle Linux experts will talk about joint collaboration with Cisco on UCS. We'll also highlight customer use cases. 5. Gartner Infrastructure & Operations Management Summit, EMEA Dates: June 11-12 Frankfurt, Germany Event website Meet experts from our Virtualization and Linux team in EMEA. Stop by our booth and find out what's new in Oracle VM Server for x86 and Oracle Linux. June is going to be busy.

Read the article

Hot new GlassFish 3.1 bits released today

- by pieter.humphrey

Java EE 6 developers will wake up this morning and be able to experience a new, major release of the Oracle GlassFish Server and the companion GlassFish Server 3.1, Open Source Edition. This release extends Java EE 6 Reference Implementation New Application Development Capabilities, Centralized Administration and High Availability Features. IDE tool support will include NetBeans and Eclipse (update center link is here), as well as the next release of Oracle Enterprise Pack for Eclipse will be updated to include the new GlassFish 3.1 Server Plug-in. Developers will be interested in the vastly improved OSGi support in GlassFish 3.1, as well as other developer friendly-features: - Enables hybrid application development Easily utilize OSGi services from Java EE Applications Easily utilize Java EE services from OSGi services - Updates the Apache Felix runtime to 3.0.6, including the Apache Gogo shell - OSGi Web Console integrated with GlassFish Admin Console (requires Update Center download, community supported) - Extends GlassFish Server 3.0 ActiveRedeploy feature to include Stateful EJBs. When applications are re-deployed, GlassFish maintains HTTP session and EJB state, enabling rapid iterative development - Application-scoped resources enable developers to limit the scope of resources to a deployed application - JDBC statement leak detection and reclaim automatically monitors, logs, and reclaims database cursors when applications fail to do so - Full EJB feature support in Embedded API Technorati Tags: OTN,Java EE6,Glassfish,Eclipse,Developer,OSGi,NetBeans,Oracle Enterprise Pack for Eclipse,clustering,high availablity,load balancing,failover,Oracle WebLogic Server del.icio.us Tags: OTN,Java EE6,Glassfish,Eclipse,Developer,OSGi,NetBeans,Oracle Enterprise Pack for Eclipse,clustering,high availablity,load balancing,failover,Oracle WebLogic Server

Read the article

Indexed view deadlocking

- by Dave Ballantyne

Deadlocks can be a really tricky thing to track down the root cause of. There are lots of articles on the subject of tracking down deadlocks, but seldom do I find that in a production system that the cause is as straightforward. That being said, deadlocks are always caused by process A needs a resource that process B has locked and process B has a resource that process A needs. There may be a longer chain of processes involved, but that is the basic premise. Here is one such (much simplified) scenario that was at first non-obvious to its cause: The system has two tables, Products and Stock. The Products table holds the description and prices of a product whilst Stock records the current stock level. USE tempdb GO CREATE TABLE Product ( ProductID INTEGER IDENTITY PRIMARY KEY, ProductName VARCHAR(255) NOT NULL, Price MONEY NOT NULL ) GO CREATE TABLE Stock ( ProductId INTEGER PRIMARY KEY, StockLevel INTEGER NOT NULL ) GO INSERT INTO Product SELECT TOP(1000) CAST(NEWID() AS VARCHAR(255)), ABS(CAST(CAST(NEWID() AS VARBINARY(255)) AS INTEGER))%100 FROM sys.columns a CROSS JOIN sys.columns b GO INSERT INTO Stock SELECT ProductID,ABS(CAST(CAST(NEWID() AS VARBINARY(255)) AS INTEGER))%100 FROM Product There is a single stored procedure of GetStock: Create Procedure GetStock as SELECT Product.ProductID,Product.ProductName FROM dbo.Product join dbo.Stock on Stock.ProductId = Product.ProductID where Stock.StockLevel <> 0 Analysis of the system showed that this procedure was causing a performance overhead and as reads of this data was many times more than writes, an indexed view was created to lower the overhead. CREATE VIEW vwActiveStock With schemabinding AS SELECT Product.ProductID,Product.ProductName FROM dbo.Product join dbo.Stock on Stock.ProductId = Product.ProductID where Stock.StockLevel <> 0 go CREATE UNIQUE CLUSTERED INDEX PKvwActiveStock on vwActiveStock(ProductID) This worked perfectly, performance was improved, the team name was cheered to the rafters and beers all round. Then, after a while, something else happened… The system updating the data changed, The update pattern of both the Stock update and the Product update used to be: BEGIN TRAN UPDATE... COMMIT BEGIN TRAN UPDATE... COMMIT BEGIN TRAN UPDATE... COMMIT It changed to: BEGIN TRAN UPDATE... UPDATE... UPDATE... COMMIT Nothing that would raise an eyebrow in even the closest of code reviews. But after this change we saw deadlocks occuring. You can reproduce this by opening two sessions. In session 1 begin transaction Update Product set ProductName ='Test' where ProductID = 998 Then in session 2 begin transaction Update Stock set Stocklevel = 5 where ProductID = 999 Update Stock set Stocklevel = 5 where ProductID = 998 Hop back to session 1 and.. Update Product set ProductName ='Test' where ProductID = 999 Looking at the deadlock graphs we could see the contention was between two processes, one updating stock and the other updating product, but we knew that all the processes do to the tables is update them. Period. There are separate processes that handle the update of stock and product and never the twain shall meet, no reason why one should be requiring data from the other. Then it struck us, AH the indexed view. Naturally, when you make an update to any table involved in a indexed view, the view has to be updated. When this happens, the data in all the tables have to be read, so that explains our deadlocks. The data from stock is read when you update product and vice-versa. The fix, once you understand the problem fully, is pretty simple, the apps did not guarantee the order in which data was updated. Luckily it was a relatively simple fix to order the updates and deadlocks went away. Note, that there is still a *slight* risk of a deadlock occurring, if both a stock update and product update occur at *exactly* the same time.

Read the article

Sign up Today for User Feedback Sessions at Oracle OpenWorld and JavaOne 2012

- by Lionel Dubreuil

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 You’re Invited to Sign Up for Oracle Usability Feedback Sessions SIGN UP TODAY to get the most from your conference experience by participating in a usability feedback session where your expertise will help Oracle develop outstanding products and solutions. The Oracle User Experience team is conducting a Usability Evaluation on publishing and accessing Oracle Enterprise Repository content when building SOA projects in JDeveloper. We are asking Developers and Architects who build or integrate applications using SOA Suite to take a look at the interaction between JDeveloper with the Enterprise Repository. We are looking for feedback on the interaction between JDeveloper and Oracle Enterprise Repository so that we may improve the User Interface in a future release. The feedback sessions will be conducted during the Oracle OpenWorld and JavaOne Conferences, at the Intercontinental Hotel in San Francisco, CA. Sessions will last 1 hour and will be held on Monday, October 1 through Wednesday, October 3, 2012. This event fills up quickly, and space is limited. If you are interested in participating, please send an email to [email protected] with the following information: Identification Name: _________________________________ Company Name: _________________________ Job Title: Email: Phone Number (work, mobile, include country code): Which conference are you attending? _____Oracle OpenWorld _____JavaOne Have you ever participated in usability activities with Oracle or any of its subsidiaries? ____Yes; specify __________________________________________________ ____No Are you currently using JDeveloper? ____Yes ; specify version(s): _______________________________ ____No How long have you used JDeveloper? ____ Less than 1 year ____ 1 - 2 years ____ 3 - 4 years ____ 4 + years Are you currently using SOA features in JDeveloper? ____Yes ____No How long have you used SOA features in JDeveloper? ____ Less than 1 year ____ 1 - 2 years ____ 3 - 4 years ____ 4 + years How often do you use SOA features in JDeveloper? ____ Daily ____ 2 - 3 times a week ____ Once a week ____ Once a month or less Briefly describe the types of SOA tasks you use JDeveloper to perform: _____________________________________ _____________________________________ Please list your availability If you know your availability; please let me know which day you would prefer to participate, Monday, Tuesday or Wednesday. Limited sessions are available on each day, and each session lasts 1 hour. Thank you for taking the time to complete this questionnaire. It will help us match you to the best suited feedback session. Once we receive your email, we will contact you to set up a time and day for participation. You'll find more information about our on-site lab on the VoX (Voice of User Experience) blog, and on our Events page at Usable Apps. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";}

Read the article

JDeveloper 11.1.2 : Command Link in Table Column Work Around

- by Frank Nimphius

Just figured that in Oracle JDeveloper 11.1.2, clicking on a command link in a table does not mark the table row as selected as it is the behavior in previous releases of Oracle JDeveloper. For the time being, the following work around can be used to achieve the "old" behavior: To mark the table row as selected, you need to build and queue the table selection event in the code executed by the command link action listener. To queue a selection event, you need to know about the rowKey of the row that the command link that you clicked on is located in. To get to this information, you add an f:attribute tag to the command link as shown below <af:column sortProperty="#{bindings.DepartmentsView1.hints.DepartmentId.name}" sortable="false" headerText="#{bindings.DepartmentsView1.hints.DepartmentId.label}" id="c1"> <af:commandLink text="#{row.DepartmentId}" id="cl1" partialSubmit="true" actionListener="#{BrowseBean.onCommandItemSelected}"> <f:attribute name="rowKey" value="#{row.rowKey}"/> </af:commandLink> ... </af:column> The f:attribute tag references #{row.rowKey} wich in ADF translates to JUCtrlHierNodeBinding.getRowKey(). This information can be used in the command link action listener to compose the RowKeySet you need to queue the selected row. For simplicitly reasons, I created a table "binding" reference to the managed bean that executes the command link action. The managed bean code that is referenced from the af:commandLink actionListener property is shown next: public void onCommandItemSelected(ActionEvent actionEvent) { //get access to the clicked command link RichCommandLink comp = (RichCommandLink)actionEvent.getComponent(); //read the added f:attribute value Key rowKey = (Key) comp.getAttributes().get("rowKey"); //get the current selected RowKeySet from the table RowKeySet oldSelection = table.getSelectedRowKeys(); //build an empty RowKeySet for the new selection RowKeySetImpl newSelection = new RowKeySetImpl(); //RowKeySets contain List objects with key objects in them ArrayList list = new ArrayList(); list.add(rowKey); newSelection.add(list); //create the selectionEvent and queue it SelectionEvent selectionEvent = new SelectionEvent(oldSelection, newSelection, table); selectionEvent.queue(); //refresh the table AdfFacesContext.getCurrentInstance().addPartialTarget(table); }

Read the article

New spreadsheet accompanying SmartAssembly 6.0 provides statistics for prioritizing bug fixes

- by Jason Crease

One problem developers face is how to prioritize the many voices providing input into software bugs. If there is something wrong with a function that is the darling of a particular user, he or she tends to want action - now! The developer's dilemma is how to ascertain that the problem is major or minor, and when it should be addressed. Now there is a new spreadsheet accompanying SmartAssembly that provides exactly that information in an objective manner. This might upset those used to getting their way by being the loudest or pushiest, but ultimately it will ensure that the biggest problems get the priority they deserve. Here's how it works: Feature Usage Reporting (FUR) in SmartAssembly 6.0 provides a wealth of data about how your software is used by its end-users, but in the SmartAssembly UI the data isn't mined to its full extent. The new Excel spreadsheet for FUR extracts statistics from that data and presents them in easy-to-understand forms. I developed the spreadsheet feature in Microsoft Excel, using a fair amount of VBA. The spreadsheet connects directly to the database which stores the feature-usage data, and shows a wide variety of statistics and tables extracted from that data. You want to know what percentage of users have used the 'Export as XML' button? No problem. How popular is v5.3 is compared to v5.1? There's graphs for that. You need to know whether you have more users in Russia or Brazil? There's a big pie chart for that. I recently witnessed the spreadsheet in use here at Red Gate Software. My bug is exposed as minor While testing new features in .NET Reflector, I found a usability bug in the Refresh button and filed it in the Red Gate bug-tracking system. The bug was labelled "V.NEXT MINOR," which means it would be fixed in the next point release. Although I'm a professional tester, I'm not much different than most software users when they discover a bug that affects them personally: I wanted it fixed immediately. There was an ulterior motive at play here, of course. I would get to see my colleagues put the spreadsheet to work. The Reflector team loaded up the spreadsheet to view the feature-usage statistics that SmartAssembly collected for the refresh button. The resulting statistics showed that only 8% of users have ever pressed the Refresh button, and only 2.6% of sessions involve pressing the button. When Refresh is used, it's only pressed on average 1.6 times a session, with a maximum of 8 times during a session. This was in stark contrast to what I was doing as a conscientious tester: pressing it dozens of times per session. The spreadsheet provides evidence that my bug was a minor one. On to more serious things Based on the solid evidence uncovered by the spreadsheet, the Reflector team concluded that my experience does not represent that of the vast majority of Reflector's recorded users. The Reflector team had ample data to send me back to my desk and keep the bug classified as "V.NEXT MINOR." The team then went back to fixing more serious bugs. If I'm in the shoes of the user, I might not be thoroughly happy, but I cannot deny that the evidence clearly placed me in a very small minority. Next time I'm hoping the spreadsheet will prove that my bug is more important. Find out more about Feature-Usage Reporting here. The spreadsheet is available for free download here.

Read the article

JavaOne User Group Sunday

- by Tori Wieldt

Before any "official" sessions of JavaOne 2012, the Java community was already sizzling. User Group Sunday was a great success, with several sessions offered by Java community members for anyone wanting to attend. Sessions were both about Java and best practices for running a JUG. Technical sessions included "Autoscaling Web Java Applications: Handle Peak Traffic with Zero Downtime and Minimized Cost," "Using Java with HTML5 and CSS3," and "Gooey and Sticky Bits: Everything You Ever Wanted to Know About Java." Several sessions were about how to start and run a JUG, like "Getting Speakers, Finding Sponsors, Planning Events: A Day in the Life of a JUG" and "JCP and OpenJDK: Using the JUGs’ “Adopt” Programs in Your Group." Badr ElHouari and Faiçal Boutaounte presented the session "Why Communities Are Important and How to Start One." They used the example of the Morocco JUG, which they started. Before the JUG, there was no "Java community," they explained. They shared their best practices, including: have fun, enjoy what you are doing get a free venue to have regular meetings, a University is a good choice run a conference, it gives you visibility and brings in new members students are a great way to grow a JUG Badr was proud to mention JMaghreb, a first-time conference that the Morocco JUG is hosting in November. They have secured sponsors and international speakers, and are able to offer a free conference for Java developers in North Africa. The session also included a free-flowing discussion about recruiters (OK to come to meetings, but not to dominate them), giving out email addresses (NEVER do without permission), no-show rates (50% for free events) and the importance of good content (good speakers really help!). Trisha Gee, member of the London Java Community (LJC) was one of the presenters for the session "Benefits of Open Source." She explained how open sourcing the LMAX Disruptor (a high performance inter-thread messaging library) gave her company LMAX several benefits, including more users, more really good quality new hires, and more access to 3rd party companies. Being open source raised the visibility of the company and the product, which was good in many ways. "We hired six really good coders in three months," Gee said. They also got community contributors for their code and more cred with technologists. "We had been unsuccessful at getting access to executives from other companies in the high-performance space. But once we were open source, the techies at the company had heard of us, knew our code was good, and that opened lots of doors for us." So, instead of "giving away the secret sauce," by going open source, LMAX gained many benefits. "It was a great day," said Bruno Souza, AKA The Brazilian Java Man, "the sessions were well attended and there was lots of good interaction." Sizzle and steak!

Read the article

Scenarios for Throwing Exceptions

- by Joe Mayo

I recently came across a situation where someone had an opinion that differed from mine of when an exception should be thrown. This particular case was an issue opened on LINQ to Twitter for an Exception on EndSession. The premise of the issue was that the poster didn’t feel an exception should be raised, regardless of authentication status. As first, this sounded like a valid point. However, I went back to review my code and decided not to make any changes. Here's my rationale: 1. The exception doesn’t occur if the user is authenticated when EndAccountSession is called. 2. The exception does occur if the user is not authenticated when EndAccountSession is called. 3. The exception represents the fact that EndAccountSession is not able to fulfill its intended purpose - to end the session. If a session never existed, then it would not be possible to perform the requested action. Therefore, an exception is appropriate. To help illustrate how to handle this situation, I've modified the following code in Program.cs in the LinqToTwitterDemo project to illustrate the situation: static void EndSession(ITwitterAuthorizer auth) { using (var twitterCtx = new TwitterContext(auth, "https://api.twitter.com/1/", "https://search.twitter.com/")) { try { //Log twitterCtx.Log = Console.Out; var status = twitterCtx.EndAccountSession(); Console.WriteLine("Request: {0}, Error: {1}" , status.Request , status.Error); } catch (TwitterQueryException tqe) { var webEx = tqe.InnerException as WebException; if (webEx != null) { var webResp = webEx.Response as HttpWebResponse; if (webResp != null && webResp.StatusCode == HttpStatusCode.Unauthorized) Console.WriteLine("Twitter didn't recognize you as having been logged in. Therefore, your request to end session is illogical.\n"); } var status = tqe.Response; Console.WriteLine("Request: {0}, Error: {1}" , status.Request , status.Error); } } } As expected, LINQ to Twitter wraps the exception in a TwitterQueryException as the InnerException. The TwitterQueryException serves a very useful purpose through it's Response property. Notice in the example above that the response has Request and Error proprieties. These properties correspond to the information that Twitter returns as part of it's response payload. This is often useful while debugging to help you understand why Twitter was unable to perform the requested action. Other times, it's cryptic, but that's another story. At least you have some way of knowing in your code how to anticipate and handle these situations, along with having extra information to debug with. To sum things up, there are two points to make: when and why an exception should be raised and when to wrap and re-throw an exception in a custom exception type. I felt it was necessary to allow the exception to be raised because the called method was unable to perform the task it was designed for. I also felt that it is inappropriate for a general library to do anything with exceptions because that could potentially hide a problem from the caller. A related point is that it should be the exclusive decision of the application that uses the library on what to do with an exception. Another aspect of this situation is that I wrapped the exception in a custom exception and re-threw. This is a tough call because I don’t want to hide any stack trace information. However, the need to make the exception more meaningful by including vital information returned from Twitter swayed me in the direction to design an interface that was as helpful as possible to library consumers. As shown in the code above, you can dig into the exception and pull out a lot of good information, such as the fact that the underlying HTTP response was a 401 Unauthorized. In all, trade-offs are seldom perfect for all cases, but combining the fact that the method was unable to perform its intended function, this is a library, and the extra information can be more helpful, it seemed to be the better design. @JoeMayo

Read the article

It happens only at Devoxx ...

- by arungupta

After attending several Java conferences world wide, this was my very first time at Devoxx. Here are some items I found that happens only at Devoxx ... Pioneers of theater-style seating - This not only provides comfortable seating for each attendee but the screens are very clearly visible to everybody in the room. Intellectual level of attendees is very high - Read more explanation on the Java EE 6 lab blog. In short, a lab, 1/3 of the content delivered at Devoxx 2011, could not be completed at other developer days in more than 1/3 the time. Snack box for lunches - Even though this suits well to the healthy lifestyle of multiple-snacks-during-a-day style but leaves attendees hungry sooner in the day. The longer breaks before the next snack in the evening does not help at all. Fortunately, Azure cupcakes and Android ice creams turned out to be handy. I finally carried my own apple :-) Wrist band instead of lanyard - The good part about this is that once tied to your hand then you are less likely to forget in your room. But OTOH you are a pretty much a branded conference attendee all through out the city. It was cost effective as it costed 20c as opposed to 1 euro for the lanyard. Live streaming from theater #8 (the biggest room) on parleys.com All talks recorded and released on parleys.com over next year. This allows attendees to not to miss any session and watch replay at their own leisure. Stephan promised to start sharing the sessions by mid December this year. No need to pre-register for a session - This is true for most of the conferences but bigger rooms (+ overflow room for key sessions) provide sufficient space for all those who want to attend the session. And of course all sessions are available on parleys.com anyway! Community votes on whiteboard - Devoxx attendees gets a chance to vote on topics ranging from their favorite non-Java language, operating system, or love from Oracle. Captured pictures at the end of Day 2 are shown below. Movie on the last but one night - This year it was The Adventures of Tintin and was lots of fun. Fries with mayo - This is a typical Belgian thing. Guys going in ladies room to avoid the long queues ... wow! Tweet wall everywhere and I mean literally everywhere, in rooms, hallways, front desk, and other places. The tweet picking algorithm was not very clear as I never saw my tweet appear on the wall ;-) You can also watch it at wall.devoxx.com. Cozy speaker dinner with great food and wine List of parallel and upcoming sessions displayed on the screen - This makes the information more explicit with the attendees. REST API with multiple mobile clients - This API is also used by some other conferences as well. And there always is iphone.devoxx.com. Steering committee members were recognized multiple times. The committee members were clearly identifiable wearing red hoodies. The wireless SSID was intuitive "Devoxx" but hidden to avoid some crap from Microsoft Windows. All of 9000 addresses were used up most of the times with each attendee having multiple devices. A 1 GB fibre optic cable was stretched to Metropolis to support the required network bandwidth. Stephan is already planning to upgrade the equipment and have a better infrastructure next year. Free water, soda, juice in a cooler Kinect connected to TV screens so that attendees can use their hands to browse through the list of sesssions. #devoxxblog, #devoxxwomen, #devoxxfrance, #devoxxgreat, #devoxxsuggestions And Devoxx attendees are called Devoxxians ... how cool is that ? :-) What other things do you think happen only at Devoxx ? And now the pictures from the community whiteboard: And a more complete album (including bigger pics of community votes) is available below:

Read the article

OpenWorld: Our (Road) Maps are Looking Good!

- by Tony Berk

Wow, only one (or two) days down at Oracle OpenWorld! Are you on overload yet? I'm still trying to figure out how to be in 3 sessions at the same time... I guess everyone needs to prioritize! There was a lot to see in Monday's sessions, especially some great forward-looking roadmap sessions. In case you aren't here or you decided to go to other sessions, this is my quick summary of what I could capture from a couple of the roadmaps: In the Fusion CRM Strategy and Roadmap session, Anthony Lye provided an overview of the Fusion CRM strategy including the key design principles of 3 E's: Easy, Effective and Efficient. After an overview of how Oracle has deployed Fusion CRM internally to 25,000 users worldwide, Anthony discussed the features coming in the next release, the releases in the next 12 months and beyond. I can't detail too much since you haven't read Oracle's Safe Harbor statement, but check out Fusion Tap and look for new features and added functionality for sales prediction, marketing, social and integration with a number of the key Customer Experience products. In the Oracle RightNow CX Cloud Service Vision and Roadmap session, Chris Hamilton presented the focus areas for the RightNow product. As a result of the large increase in development resources after the acquisition, the RightNow CX team is planning a lot of enhancements to the functionality, infrastructure and integrations. As a key piece of the Oracle Customer Experience (CX) strategy, RightNow will be integrated with Oracle Social Network, Oracle Commerce (ATG and Endeca), Oracle Knowledge, Oracle Policy Automation and, of course, further integration with Fusion Sales and Marketing. Look forward to seeing more on the Virtual Assistant, Smart Interaction Hub and Mobility. In addition to the roadmaps, I was looking forward to hearing from Oracle CRM customers. So, I sat in on two great Siebel customer panels: The Maximizing User Adoption Rates for Siebel Sales and Siebel Partner Relationship Management panel consisted of speakers from CSL Behring, McKesson and Intuit. It was great to get an overview of implementations for both B2B and B2C companies. It was great hearing that all of these companies have more than 1,000 sales users (Intuit has 4,000) and how the 360 degree view of the customer in Siebel is helping these customers improve their customers' experience (CX). They are all great examples of centralized implementations which have standardized processes across the globe and across business units. Waste Management, Farmers Insurance and the US Citizenship & Immigration Services presented in the Driving Great Customer Experiences with Siebel Service Applications session. Talk about serving large customer bases! Is it possible that Farmers with only 10 million households is the smallest of these 3? All of them provided great examples of how they are improving the customer experience (CX) including 60-70% improvements in efficiency or reducing the number of applications the customer service reps (CSRs) need to use from 10 to 1 (Waste Management) and context aware call transfers to avoid the caller explaining their issue 3 times (USCIS). So that's my wrap up of only 4 sessions from Monday. In between sessions, I stopped by the Oracle DEMOgrounds and CRM Pavilion to visit with a group of great partners and see the products and partner integrations in action. Don't miss a recap of Mark Hurd's Keynote. I can't believe there were another 40+ sessions covering CRM, Fusion, Cloud, etc. that I missed today! Anyone else see any great sessions?

Read the article

Server-Sent Events using GlassFish (TOTD #179)

- by arungupta

Bhakti blogged about Server-Sent Events on GlassFish and I've been planning to try it out for past some days. Finally, I took some time out today to learn about it and build a simplistic example showcasing the touch points. Server-Sent Events is developed as part of HTML5 specification and provides push notifications from a server to a browser client in the form of DOM events. It is defined as a cross-browser JavaScript API called EventSource. The client creates an EventSource by requesting a particular URL and registers an onmessage event listener to receive the event notifications. This can be done as shown var url = 'http://' + document.location.host + '/glassfish-sse/simple';eventSource = new EventSource(url);eventSource.onmessage = function (event) { var theParagraph = document.createElement('p'); theParagraph.innerHTML = event.data.toString(); document.body.appendChild(theParagraph);} This code subscribes to a URL, receives the data in the event listener, adds it to a HTML paragraph element, and displays it in the document. This is where you'll parse JSON and other processing to display if some other data format is received from the URL. The URL to which the EventSource is subscribed to is updated on the server side and there are multipe ways to do that. GlassFish 4.0 provide support for Server-Sent Events and it can be achieved registering a handler as shown below: @ServerSentEvent("/simple")public class MySimpleHandler extends ServerSentEventHandler { public void sendMessage(String data) { try { connection.sendMessage(data); } catch (IOException ex) { . . . } }} And then events can be sent to this handler using a singleton session bean as shown: @Startup@Statelesspublic class SimpleEvent { @Inject @ServerSentEventContext("/simple") ServerSentEventHandlerContext<MySimpleHandler> simpleHandlers; @Schedule(hour="*", minute="*", second="*/10") public void sendDate() { for(MySimpleHandler handler : simpleHandlers.getHandlers()) { handler.sendMessage(new Date().toString()); } }} This stateless session bean injects ServerSentEventHandlers listening on "/simple" path. Note, there may be multiple handlers listening on this path. The sendDate method triggers every 10 seconds and send the current timestamp to all the handlers. The client side browser simply displays the string. The HTTP request headers look like: Accept: text/event-streamAccept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3Accept-Encoding: gzip,deflate,sdchAccept-Language: en-US,en;q=0.8Cache-Control: no-cacheConnection: keep-aliveCookie: JSESSIONID=97ff28773ea6a085e11131acf47bHost: localhost:8080Referer: http://localhost:8080/glassfish-sse/faces/index2.xhtmlUser-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.54 Safari/536.5 And the response headers as: Content-Type: text/event-streamDate: Thu, 14 Jun 2012 21:16:10 GMTServer: GlassFish Server Open Source Edition 4.0Transfer-Encoding: chunkedX-Powered-By: Servlet/3.0 JSP/2.2 (GlassFish Server Open Source Edition 4.0 Java/Apple Inc./1.6) Notice, the MIME type of the messages from server to the client is text/event-stream and that is defined by the specification. The code in Bhakti's blog can be further simplified by using the recently-introduced Twitter API for Java as shown below: @Schedule(hour="*", minute="*", second="*/10") public void sendTweets() { for(MyTwitterHandler handler : twitterHandler.getHandlers()) { String result = twitter.search("glassfish", String.class); handler.sendMessage(result); }} The complete source explained in this blog can be downloaded here and tried on GlassFish 4.0 build 34. The latest promoted build can be downloaded from here and the complete source code for the API and implementation is here. I tried this sample on Chrome Version 19.0.1084.54 on Mac OS X 10.7.3.

Read the article

How do I add a header to a VB.NET 2008 SOAP request? [migrated]

- by robokev

I have a VB.NET 2008 program that accesses a Siebel web service defined by a WSDL and using the SOAP protocol. The Siebel web service requires that a header containing the username, password and session type be included with the service request, but the header is not defined in the WSDL. So, when I test the WSDL using the soapUI utility, the request as defined by the WSDL looks like this: <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:lov="http://www.siebel.com/xml/LOVService" xmlns:lis="http://www.siebel.com/xml/ListQuery"> <soapenv:Header/> <soapenv:Body> <lov:EAILOVGetListOfValues_Input> <lis:ListsQuery> <lis:ListQuery> <lis:Active>Y</lis:Active> <lis:LanguageCode>ENU</lis:LanguageCode> <lis:Type>CUT_ACCOUNT_TYPE</lis:Type> </lis:ListQuery> </lis:ListsQuery> </lov:EAILOVGetListOfValues_Input> </soapenv:Body> </soapenv:Envelope> But the above does not work because it contains an empty header that is missing user and session credentials. It only works if I manually replace <soapenv:Header/> with a header containing the username, password, and session type as follows: <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:lov="http://www.siebel.com/xml/LOVService" xmlns:lis="http://www.siebel.com/xml/ListQuery"> <soapenv:Header> <UsernameToken xmlns="http://siebel.com/webservices">TESTUSER</UsernameToken> <PasswordText xmlns="http://siebel.com/webservices">TESTPASSWORD</PasswordText> <SessionType xmlns="http://siebel.com/webservices">None</SessionType> </soapenv:Header> <soapenv:Body> <lov:EAILOVGetListOfValues_Input> <lis:ListsQuery> <lis:ListQuery> <lis:Active>Y</lis:Active> <lis:LanguageCode>ENU</lis:LanguageCode> <lis:Type>CUT_ACCOUNT_TYPE</lis:Type> </lis:ListQuery> </lis:ListsQuery> </lov:EAILOVGetListOfValues_Input> </soapenv:Body> </soapenv:Envelope> My problem is that I cannot sort out how to translate the above into VB.NET 2008 code. I have no problem importing the WSDL into Visual Studio 2008, defining the service in VB code and referencing the web service methods. However, I cannot sort out how to define the web service in VB such that the updated header in included in the web service request instead of the empty header. Consequently all my service requests from VB fail. I can define a class that inherits from the SoapHeader class... Public Class MySoapHeader : Inherits System.Web.Services.Protocols.SoapHeader Public Username As String Public Password As String Public SessionType As String End Class ...but how do I include this header in the SOAP request made from VB?

Read the article

Fed Authentication Methods in OIF / IdP

- by Damien Carru

This article is a continuation of my previous entry where I explained how OIF/IdP leverages OAM to authenticate users at runtime: OIF/IdP internally forwards the user to OAM and indicates which Authentication Scheme should be used to challenge the user if needed OAM determine if the user should be challenged (user already authenticated, session timed out or not, session authentication level equal or higher than the level of the authentication scheme specified by OIF/IdP…) After identifying the user, OAM internally forwards the user back to OIF/IdP OIF/IdP can resume its operation In this article, I will discuss how OIF/IdP can be configured to map Federation Authentication Methods to OAM Authentication Schemes: When processing an Authn Request, where the SP requests a specific Federation Authentication Method with which the user should be challenged When sending an Assertion, where OIF/IdP sets the Federation Authentication Method in the Assertion Enjoy the reading! Overview The various Federation protocols support mechanisms allowing the partners to exchange information on: How the user should be challenged, when the SP/RP makes a request How the user was challenged, when the IdP/OP issues an SSO response When a remote SP partner redirects the user to OIF/IdP for Federation SSO, the message might contain data requesting how the user should be challenged by the IdP: this is treated as the Requested Federation Authentication Method. OIF/IdP will need to map that Requested Federation Authentication Method to a local Authentication Scheme, and then invoke OAM for user authentication/challenge with the mapped Authentication Scheme. OAM would authenticate the user if necessary with the scheme specified by OIF/IdP. Similarly, when an IdP issues an SSO response, most of the time it will need to include an identifier representing how the user was challenged: this is treated as the Federation Authentication Method. When OIF/IdP issues an Assertion, it will evaluate the Authentication Scheme with which OAM identified the user: If the Authentication Scheme can be mapped to a Federation Authentication Method, then OIF/IdP will use the result of that mapping in the outgoing SSO response: AuthenticationStatement in the SAML Assertion OpenID Response, if PAPE is enabled If the Authentication Scheme cannot be mapped, then OIF/IdP will set the Federation Authentication Method as the Authentication Scheme name in the outgoing SSO response: AuthenticationStatement in the SAML Assertion OpenID Response, if PAPE is enabled Mappings In OIF/IdP, the mapping between Federation Authentication Methods and Authentication Schemes has the following rules: One Federation Authentication Method can be mapped to several Authentication Schemes In a Federation Authentication Method <-> Authentication Schemes mapping, a single Authentication Scheme is marked as the default scheme that will be used to authenticate a user, if the SP/RP partner requests the user to be authenticated via a specific Federation Authentication Method An Authentication Scheme can be mapped to a single Federation Authentication Method Let’s examine the following example and the various use cases, based on the SAML 2.0 protocol: Mappings defined as: urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport mapped to LDAPScheme, marked as the default scheme used for authentication BasicScheme urn:oasis:names:tc:SAML:2.0:ac:classes:X509 mapped to X509Scheme, marked as the default scheme used for authentication Use cases: SP sends an AuthnRequest specifying urn:oasis:names:tc:SAML:2.0:ac:classes:X509 as the RequestedAuthnContext: OIF/IdP will authenticate the use with X509Scheme since it is the default scheme mapped for that method. SP sends an AuthnRequest specifying urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport as the RequestedAuthnContext: OIF/IdP will authenticate the use with LDAPScheme since it is the default scheme mapped for that method, not the BasicScheme SP did not request any specific methods, and user was authenticated with BasisScheme: OIF/IdP will issue an Assertion with urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport as the FederationAuthenticationMethod SP did not request any specific methods, and user was authenticated with LDAPScheme: OIF/IdP will issue an Assertion with urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport as the FederationAuthenticationMethod SP did not request any specific methods, and user was authenticated with BasisSessionlessScheme: OIF/IdP will issue an Assertion with BasisSessionlessScheme as the FederationAuthenticationMethod, since that scheme could not be mapped to any Federation Authentication Method (in this case, the administrator would need to correct that and create a mapping) Configuration Mapping Federation Authentication Methods to OAM Authentication Schemes is protocol dependent, since the methods are defined in the various protocols (SAML 2.0, SAML 1.1, OpenID 2.0). As such, the WLST commands to set those mappings will involve: Either the SP Partner Profile and affect all Partners referencing that profile, which do not override the Federation Authentication Method to OAM Authentication Scheme mappings Or the SP Partner entry, which will only affect the SP Partner It is important to note that if an SP Partner is configured to define one or more Federation Authentication Method to OAM Authentication Scheme mappings, then all the mappings defined in the SP Partner Profile will be ignored. Authentication Schemes As discussed in the previous article, during Federation SSO, OIF/IdP will internally forward the user to OAM for authentication/verification and specify which Authentication Scheme to use. OAM will determine if a user needs to be challenged: If the user is not authenticated yet If the user is authenticated but the session timed out If the user is authenticated, but the authentication scheme level of the original authentication is lower than the level of the authentication scheme requested by OIF/IdP So even though an SP requests a specific Federation Authentication Method to be used to challenge the user, if that method is mapped to an Authentication Scheme and that at runtime OAM deems that the user does not need to be challenged with that scheme (because the user is already authenticated, session did not time out, and the session authn level is equal or higher than the one for the specified Authentication Scheme), the flow won’t result in a challenge operation. Protocols SAML 2.0 The SAML 2.0 specifications define the following Federation Authentication Methods for SAML 2.0 flows: urn:oasis:names:tc:SAML:2.0:ac:classes:unspecified urn:oasis:names:tc:SAML:2.0:ac:classes:InternetProtocol urn:oasis:names:tc:SAML:2.0:ac:classes:Telephony urn:oasis:names:tc:SAML:2.0:ac:classes:MobileOneFactorUnregistered urn:oasis:names:tc:SAML:2.0:ac:classes:PersonalTelephony urn:oasis:names:tc:SAML:2.0:ac:classes:PreviousSession urn:oasis:names:tc:SAML:2.0:ac:classes:MobileOneFactorContract urn:oasis:names:tc:SAML:2.0:ac:classes:Smartcard urn:oasis:names:tc:SAML:2.0:ac:classes:Password urn:oasis:names:tc:SAML:2.0:ac:classes:InternetProtocolPassword urn:oasis:names:tc:SAML:2.0:ac:classes:X509 urn:oasis:names:tc:SAML:2.0:ac:classes:TLSClient urn:oasis:names:tc:SAML:2.0:ac:classes:PGP urn:oasis:names:tc:SAML:2.0:ac:classes:SPKI urn:oasis:names:tc:SAML:2.0:ac:classes:XMLDSig urn:oasis:names:tc:SAML:2.0:ac:classes:SoftwarePKI urn:oasis:names:tc:SAML:2.0:ac:classes:Kerberos urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport urn:oasis:names:tc:SAML:2.0:ac:classes:SecureRemotePassword urn:oasis:names:tc:SAML:2.0:ac:classes:NomadTelephony urn:oasis:names:tc:SAML:2.0:ac:classes:AuthenticatedTelephony urn:oasis:names:tc:SAML:2.0:ac:classes:MobileTwoFactorUnregistered urn:oasis:names:tc:SAML:2.0:ac:classes:MobileTwoFactorContract urn:oasis:names:tc:SAML:2.0:ac:classes:SmartcardPKI urn:oasis:names:tc:SAML:2.0:ac:classes:TimeSyncToken Out of the box, OIF/IdP has the following mappings for the SAML 2.0 protocol: Only urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport is defined This Federation Authentication Method is mapped to: LDAPScheme, marked as the default scheme used for authentication FAAuthScheme BasicScheme BasicFAScheme This mapping is defined in the saml20-sp-partner-profile SP Partner Profile which is the default OOTB SP Partner Profile for SAML 2.0 An example of an AuthnRequest message sent by an SP to an IdP with the SP requesting a specific Federation Authentication Method to be used to challenge the user would be: <samlp:AuthnRequest xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol" Destination="https://idp.com/oamfed/idp/samlv20" ID="id-8bWn-A9o4aoMl3Nhx1DuPOOjawc-" IssueInstant="2014-03-21T20:51:11Z" Version="2.0"> <saml:Issuer ...>https://acme.com/sp</saml:Issuer> <samlp:NameIDPolicy AllowCreate="false" Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified"/> <samlp:RequestedAuthnContext Comparison="minimum"> <saml:AuthnContextClassRef xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion"> urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport </saml:AuthnContextClassRef> </samlp:RequestedAuthnContext></samlp:AuthnRequest> An example of an Assertion issued by an IdP would be: <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> An administrator would be able to specify a mapping between a SAML 2.0 Federation Authentication Method and one or more OAM Authentication Schemes SAML 1.1 The SAML 1.1 specifications define the following Federation Authentication Methods for SAML 1.1 flows: urn:oasis:names:tc:SAML:1.0:am:unspecified urn:oasis:names:tc:SAML:1.0:am:HardwareToken urn:oasis:names:tc:SAML:1.0:am:password urn:oasis:names:tc:SAML:1.0:am:X509-PKI urn:ietf:rfc:2246 urn:oasis:names:tc:SAML:1.0:am:PGP urn:oasis:names:tc:SAML:1.0:am:SPKI urn:ietf:rfc:3075 urn:oasis:names:tc:SAML:1.0:am:XKMS urn:ietf:rfc:1510 urn:ietf:rfc:2945 Out of the box, OIF/IdP has the following mappings for the SAML 1.1 protocol: Only urn:oasis:names:tc:SAML:1.0:am:password is defined This Federation Authentication Method is mapped to: LDAPScheme, marked as the default scheme used for authentication FAAuthScheme BasicScheme BasicFAScheme This mapping is defined in the saml11-sp-partner-profile SP Partner Profile which is the default OOTB SP Partner Profile for SAML 1.1 An example of an Assertion issued by an IdP would be: <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password"> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> Note: SAML 1.1 does not define an AuthnRequest message. An administrator would be able to specify a mapping between a SAML 1.1 Federation Authentication Method and one or more OAM Authentication Schemes OpenID 2.0 The OpenID 2.0 PAPE specifications define the following Federation Authentication Methods for OpenID 2.0 flows: http://schemas.openid.net/pape/policies/2007/06/phishing-resistant http://schemas.openid.net/pape/policies/2007/06/multi-factor http://schemas.openid.net/pape/policies/2007/06/multi-factor-physical Out of the box, OIF/IdP does not define any mappings for the OpenID 2.0 Federation Authentication Methods. For OpenID 2.0, the configuration will involve mapping a list of OpenID 2.0 policies to a list of Authentication Schemes. An example of an OpenID 2.0 Request message sent by an SP/RP to an IdP/OP would be: https://idp.com/openid?openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=checkid_setup&openid.claimed_id=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0%2Fidentifier_select&openid.identity=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0%2Fidentifier_select&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.realm=https%3A%2F%2Facme.com%2Fopenid&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_request&openid.ax.type.attr0=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.if_available=attr0&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.max_auth_age=0 An example of an Open ID 2.0 SSO Response issued by an IdP/OP would be: https://acme.com/openid?refid=id-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=id_res&openid.op_endpoint=https%3A%2F%2Fidp.com%2Fopenid&openid.claimed_id=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.identity=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.response_nonce=2014-03-24T19%3A20%3A06Zid-YPa2kTNNFftZkgBb460jxJGblk2g--iNwPpDI7M1&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_response&openid.ax.type.attr0=http%3A%2F%2Fsession%2Fcount&openid.ax.value.attr0=1&openid.ax.type.attr1=http%3A%2F%2Fopenid.net%2Fschema%2FnamePerson%2Ffriendly&openid.ax.value.attr1=My+name+is+Bobby+Smith&openid.ax.type.attr2=http%3A%2F%2Fschemas.openid.net%2Fax%2Fapi%2Fuser_id&openid.ax.value.attr2=bob&openid.ax.type.attr3=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.value.attr3=bob%40oracle.com&openid.ax.type.attr4=http%3A%2F%2Fsession%2Fipaddress&openid.ax.value.attr4=10.145.120.253&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.auth_time=2014-03-24T19%3A20%3A05Z&openid.pape.auth_policies=http%3A%2F%2Fschemas.openid.net%2Fpape%2Fpolicies%2F2007%2F06%2Fphishing-resistant&openid.signed=op_endpoint%2Cclaimed_id%2Cidentity%2Creturn_to%2Cresponse_nonce%2Cassoc_handle%2Cns.ax%2Cax.mode%2Cax.type.attr0%2Cax.value.attr0%2Cax.type.attr1%2Cax.value.attr1%2Cax.type.attr2%2Cax.value.attr2%2Cax.type.attr3%2Cax.value.attr3%2Cax.type.attr4%2Cax.value.attr4%2Cns.pape%2Cpape.auth_time%2Cpape.auth_policies&openid.sig=mYMgbGYSs22l8e%2FDom9NRPw15u8%3D In the next article, I will provide examples on how to configure OIF/IdP for the various protocols, to map OAM Authentication Schemes to Federation Authentication Methods.Cheers,Damien Carru

Read the article

Using Rich Text Editor (WYSIWYG) in ASP.NET MVC

- by imran_ku07

Introduction: In ASP.NET MVC forum I found some question regarding a sample HTML Rich Text Box Editor(also known as wysiwyg).So i decided to create a sample ASP.NET MVC web application which will use a Rich Text Box Editor. There are are lot of Html Editors are available, but for creating a sample application, i decided to use cross-browser WYSIWYG editor from openwebware. In this article I will discuss what changes needed to work this editor with ASP.NET MVC. Also I had attached the sample application for download at http://www.speedfile.org/155076. Also note that I will only show the important features, not discuss every feature in detail. Description: So Let's start create a sample ASP.NET MVC application. You need to add the following script files, jquery-1.3.2.min.js jquery_form.js wysiwyg.js wysiwyg-settings.js wysiwyg-popup.js Just put these files inside Scripts folder. Also put wysiwyg.css in your Content Folder and add the following folders in your project addons popups Also create a empty folder Uploads to store the uploaded images. Next open wysiwyg.js and set your configuration // Images Directory this.ImagesDir = "/addons/imagelibrary/images/"; // Popups Directory this.PopupsDir = "/popups/"; // CSS Directory File this.CSSFile = "/Content/wysiwyg.css"; Next create a simple View TextEditor.aspx inside View / Home Folder and add the folllowing HTML. <%@ Page Language="C#" Inherits="System.Web.Mvc.ViewPage" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html > <head runat="server"> <title>TextEditor</title> <script src="../../Scripts/wysiwyg.js" type="text/javascript"></script> <script src="../../Scripts/wysiwyg-settings.js" type="text/javascript"></script> <script type="text/javascript"> WYSIWYG.attach('text', full); </script> </head> <body> <% using (Html.BeginForm()){ %> <textarea id="text" name="test2" style="width:850px;height:200px;"> </textarea> <input type="submit" value="submit" /> <%} %> </body> </html> Here i have just added a text area control and a submit button inside a form. Note the id of text area and WYSIWYG.attach function's first parameter is same and next to watch is the HomeController.cs using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.Mvc; using System.IO; namespace HtmlTextEditor.Controllers { [HandleError] public class HomeController : Controller { public ActionResult Index() { ViewData["Message"] = "Welcome to ASP.NET MVC!"; return View(); } public ActionResult About() { return View(); } public ActionResult TextEditor() { return View(); } [AcceptVerbs(HttpVerbs.Post)] [ValidateInput(false)] public ActionResult TextEditor(string test2) { Session["html"] = test2; return RedirectToAction("Index"); } public ActionResult UploadImage() { if (Request.Files[0].FileName != "") { Request.Files[0].SaveAs(Server.MapPath("~/Uploads/" + Path.GetFileName(Request.Files[0].FileName))); return Content(Url.Content("~/Uploads/" + Path.GetFileName(Request.Files[0].FileName))); } return Content("a"); } } } So simple code, just save the posted Html into Session. Here the parameter of TextArea action is test2 which is same as textarea control name of TextArea.aspx View. Also note ValidateInputAttribute is false, so it's up to you to defends against XSS. Also there is an Action method which simply saves the file inside Upload Folder. I am uploading the file using Jquery Form Plugin. Here is the code which is found in insert_image.html inside addons folder, function ChangeImage() { var myform=document.getElementById("formUpload"); $(myform).ajaxSubmit({success: function(responseText){ insertImage(responseText); window.close(); } }); } and here is the Index View which simply renders the html of Editor which was saved in Session <%@ Page Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage" %> <asp:Content ID="indexTitle" ContentPlaceHolderID="TitleContent" runat="server"> Home Page </asp:Content> <asp:Content ID="indexContent" ContentPlaceHolderID="MainContent" runat="server"> <h2><%= Html.Encode(ViewData["Message"]) %></h2> <p> To learn more about ASP.NET MVC visit <a href="http://asp.net/mvc" title="ASP.NET MVC Website">http://asp.net/mvc</a>. </p> <%if (Session["html"] != null){ Response.Write(Session["html"].ToString()); } %> </asp:Content> Summary: Hopefully you will enjoy this article. Just download the code and see the effect. From security point, you must handle the XSS attack your self. I had uploaded the sample application in http://www.speedfile.org/155076

Read the article

i get the exception org.hibernate.MappingException: No Dialect mapping for JDBC type: -9

- by ramesh m

i am using hibernate .i wrote Native sql query. this query will be execute in sqlSever command promt try { session=HibernateUtil.getInstance().getSession(); transaction=session.beginTransaction(); SQLQuery query = session.createSQLQuery("SELECT AP.PROJECT_NAME, AP.SKILLSET, PA.START_DATE, PA.END_DATE, RS.EMPLOYEE_ID, RS.EMPLOYEE_NAME, RS.REPORTING_PM FROM RESOURCE_MASTER RS,SHARED_PROPOSAL S, ACTUAL_PROPOSAL AP, PROJECT_APPROVED PA, PROJECT_ALLOCATION PL WHERE RS.EMPLOYEE_ID = PL.EMPLOYEE_ID AND PA.PROJECT_ID = PL.PROJECT_ID AND PA.SHARED_PROPOSAL_ID = S.SHARED_PROPOSAL_ID AND S.ACTUAL_PROPOSAL_ID=AP.ACTUAL_PROPOSAL_ID"); List<Object[]> obj=query.list(); Object[] object=new Object[arrayList.size()]; for (int i = 0; i < arrayList.size(); i++) { object[i]=arrayList.get(i); System.out.println(object[i]); } arrayList.get(0); String name=(String)arrayList.get(0); logger.info("In find All searchDeveloper"); }catch(Exception exception) { throw new PPAMException("Contact admin","Problem retrieving resource master list",exception); } like that i am using on that time i got this Exception: org.hibernate.MappingException: No Dialect mapping for JDBC type: -9 this query is executed in sqlserver command propt , i maaped seven tables, but remove ACTUAL_PROPOSAL AP table .it is execute correctly please help me

Read the article

Yii urlManager language in URL

- by TaMeR

I am trying to add a language to the url with following syntax: http://www.example.com/en/site/page/view/about What I have so far works with short urls like: http://www.example.com/en/site/contact but not with long once as in my first example Here is what I have so far: /config/main.php 'urlManager'=>array( 'class'=>'application.components.MyCUrlManager', 'urlFormat'=>'path', 'showScriptName'=>false, 'rules'=>array( '<language:\w+>/<controller:\w+>/<id:\d+>'=>'<controller>/view', '<language:\w+>/<controller:\w+>/<action:\w+>/<id:\d+>'=>'<controller>/<action>', '<language:\w+>/<controller:\w+>/<action:\w+>'=>'<controller>/<action>', ), ), <?php // components/MyCUrlManager.php class MyCUrlManager extends CUrlManager { public function createUrl($route,$params=array(),$ampersand='&') { if(isset($_POST['_lang'])){ Yii::app()->language = $_POST['_lang']; }elseif (!isset($route['language']) && $controller != 'srbac'){ $route['language']=Yii::app()->language; }else{ Yii::app()->language = $route['language']; } return parent::createUrl($route, $params, $ampersand); } } ?> class Controller extends CController: { /// ..... function init() { parent::init(); if (isset($_POST['_lang'])) { Yii::app()->setLanguage($_POST['_lang']); Yii::app()->session['_lang'] = Yii::app()->language; }elseif (isset(Yii::app()->session['_lang'])) { Yii::app()->setLanguage(Yii::app()->session['_lang']); } } } class LangBox extends CWidget { public function run() { $currentLang = Yii::app()->language; require_once 'Zend/Locale.php'; $locale = new Zend_Locale(); //$siteLanguages = $this->getLang(); $siteLanguages = array('en','de','tr'); foreach($siteLanguages as $value){ $list[$value] = $locale->getTranslation($value, 'Language', $value); } asort($list); $this->render('langBox', array('currentLang' => $currentLang, 'list'=>$list)); } }

Read the article

JSF 2.0 AJAX: jsf.ajax.request to call method not only rerender an area of page

- by gerry

Hi, I'm looking for a soultion of the following problem: _The is a list of links with different types of cars. _The user can click on each car in the list and a ajax request should be sent. _The response of the ajax request should be dependent on the id (of each car) and displayed in an panelGroup. So what I need is a possibility to call a method on the backing-bean. Additionally, this method should be called with a car id as its parameter. My code so far looks like: ... <ul> <ui:repeat value="#{carTree.getCars)}" var="car"> <h:outputScript name="jsf.js" library="javax.faces" target="head" /> <li onclick="showDetails(#{car.id});">#{car.name}</li> </ui:repeat> </ul> ... <h:panelGroup id="carDetails" layout="block" style="float:left;"> // need the details of each 'selected /clicked' car here </h:panelGroup> ... And the method in the backing bean should look like: public class CarTree { ... public String getCarDetails(int carid){ return "The car details for the car id "+carid+" are......"; } ... } I've no idea how to call a method by using the new JSF 2.0 AJAX functionality. Please, help me...

Read the article

NHibernate SubclassMap gives DuplicateMappingException

- by stiank81

I'm using NHibernate to handle my database - with Fluent configuration. I'm not using Automappings. All mappings are written explicitly, and everything is working just fine. Now I wanted to add my first mapping to a subclass, using the SubclassMap, and I run into problems. With the simplest possible setup an Nhibernate DuplicateMappingException is thrown, saying that the subclass is mapped more than once: NHibernate.MappingException : Could not compile the mapping document: (XmlDocument) ---- NHibernate.DuplicateMappingException : Duplicate class/entity mapping MyNamespace.SubPerson I get this with my simple classes written for testing: public class Person { public int Id { get; set; } public string Name { get; set; } } public class SubPerson : Person { public string Foo { get; set; } } With the following mappings: public class PersonMapping : ClassMap<Person> { public PersonMapping() { Not.LazyLoad(); Id(c => c.Id); Map(c => c.Name); } } public class SubPersonMapping : SubclassMap<SubPerson> { public SubPersonMapping() { Not.LazyLoad(); Map(m => m.Foo); } } Any idea why this is happening? If there were automappings involved I guess it might have been caused by the automappings adding a mapping too, but there should be no automapping. I create my database specifying a fluent mapping: private static ISession CreateSession() { var cfg = Fluently.Configure(). Database(SQLiteConfiguration.Standard.ShowSql().UsingFile("unit_test.db")). Mappings(m => m.FluentMappings.AddFromAssemblyOf<SomeClassInTheAssemblyContainingAllMappings>()); var sessionSource = new SessionSource(cfg.BuildConfiguration().Properties, new TestModel()); var session = sessionSource.CreateSession(); _sessionSource.BuildSchema(session); return session; } Again; note that this only happens with SubclassMap. ClassMap's are working just fine!

Read the article

Hibernate Query Exception

- by dharga

I've got a hibernate query I'm trying to get working but keep getting an exception with a not so helpful stack trace. I'm including the code, the stack trace, and hibernate chatter before the exception is thrown. If you need me to include the entity classes for MessageTarget and GrpExclusion let me know in comments and I'll add them. public List<MessageTarget> findMessageTargets(int age, String gender, String businessCode, String groupId, String systemCode) { Session session = getHibernateTemplate().getSessionFactory().openSession(); List<MessageTarget> results = new ArrayList<MessageTarget>(); try { String hSql = "from MessageTarget mt where " + "not exists (select GrpExclusion where grp_no = ?) and " + "(trgt_gndr_cd = 'A' or trgt_gndr_cd = ?) and " + "sys_src_cd = ? and " + "bampi_busn_sgmnt_cd = ? and " + "trgt_low_age <= ? and " + "trgt_high_age >= ? and " + "(effectiveDate is null or effectiveDate <= ?) and " + "(termDate is null or termDate >= ?)"; results = session.createQuery(hSql) .setParameter(0, groupId) .setParameter(1, gender) .setParameter(2, systemCode) .setParameter(3, businessCode) .setParameter(4, age) .setParameter(5, age) .setParameter(6, new Date()) .setParameter(7, new Date()) .list(); } catch (Exception e) { System.err.println(e.getMessage()); e.printStackTrace(); } finally { session.close(); } return results; } Here's the stacktrace. [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R java.lang.NullPointerException [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.ast.util.SessionFactoryHelper.findSQLFunction(SessionFactoryHelper.java:365) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.ast.tree.IdentNode.getDataType(IdentNode.java:289) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.ast.tree.SelectClause.initializeExplicitSelectClause(SelectClause.java:165) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.ast.HqlSqlWalker.useSelectClause(HqlSqlWalker.java:831) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.ast.HqlSqlWalker.processQuery(HqlSqlWalker.java:619) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.antlr.HqlSqlBaseWalker.query(HqlSqlBaseWalker.java:672) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.antlr.HqlSqlBaseWalker.collectionFunctionOrSubselect(HqlSqlBaseWalker.java:4465) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.antlr.HqlSqlBaseWalker.comparisonExpr(HqlSqlBaseWalker.java:4165) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.antlr.HqlSqlBaseWalker.logicalExpr(HqlSqlBaseWalker.java:1864) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.antlr.HqlSqlBaseWalker.logicalExpr(HqlSqlBaseWalker.java:1839) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.antlr.HqlSqlBaseWalker.logicalExpr(HqlSqlBaseWalker.java:1789) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.antlr.HqlSqlBaseWalker.logicalExpr(HqlSqlBaseWalker.java:1789) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.antlr.HqlSqlBaseWalker.logicalExpr(HqlSqlBaseWalker.java:1789) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.antlr.HqlSqlBaseWalker.logicalExpr(HqlSqlBaseWalker.java:1789) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.antlr.HqlSqlBaseWalker.logicalExpr(HqlSqlBaseWalker.java:1789) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.antlr.HqlSqlBaseWalker.logicalExpr(HqlSqlBaseWalker.java:1789) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.antlr.HqlSqlBaseWalker.logicalExpr(HqlSqlBaseWalker.java:1789) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.antlr.HqlSqlBaseWalker.whereClause(HqlSqlBaseWalker.java:818) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.antlr.HqlSqlBaseWalker.query(HqlSqlBaseWalker.java:604) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.antlr.HqlSqlBaseWalker.selectStatement(HqlSqlBaseWalker.java:288) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.antlr.HqlSqlBaseWalker.statement(HqlSqlBaseWalker.java:231) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.ast.QueryTranslatorImpl.analyze(QueryTranslatorImpl.java:254) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.ast.QueryTranslatorImpl.doCompile(QueryTranslatorImpl.java:185) [5/6/10 15:05:21:041 EDT] 00000017 SystemErr R at org.hibernate.hql.ast.QueryTranslatorImpl.compile(QueryTranslatorImpl.java:136) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at org.hibernate.engine.query.HQLQueryPlan.<init>(HQLQueryPlan.java:101) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at org.hibernate.engine.query.HQLQueryPlan.<init>(HQLQueryPlan.java:80) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at org.hibernate.engine.query.QueryPlanCache.getHQLQueryPlan(QueryPlanCache.java:94) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at org.hibernate.impl.AbstractSessionImpl.getHQLQueryPlan(AbstractSessionImpl.java:156) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at org.hibernate.impl.AbstractSessionImpl.createQuery(AbstractSessionImpl.java:135) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at org.hibernate.impl.SessionImpl.createQuery(SessionImpl.java:1651) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.bcbst.bamp.ws.dao.MessageTargetDAOImpl.findMessageTargets(MessageTargetDAOImpl.java:30) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.bcbst.bamp.ws.common.AlertReminder.findMessageTargets(AlertReminder.java:22) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at java.lang.reflect.Method.invoke(Method.java:599) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at org.apache.axis2.jaxws.server.dispatcher.JavaDispatcher.invokeTargetOperation(JavaDispatcher.java:81) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at org.apache.axis2.jaxws.server.dispatcher.JavaBeanDispatcher.invoke(JavaBeanDispatcher.java:98) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at org.apache.axis2.jaxws.server.EndpointController.invoke(EndpointController.java:109) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at org.apache.axis2.jaxws.server.JAXWSMessageReceiver.receive(JAXWSMessageReceiver.java:159) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at org.apache.axis2.engine.AxisEngine.receive(AxisEngine.java:188) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at org.apache.axis2.transport.http.HTTPTransportUtils.processHTTPPostRequest(HTTPTransportUtils.java:275) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.ws.websvcs.transport.http.WASAxis2Servlet.doPost(WASAxis2Servlet.java:1389) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at javax.servlet.http.HttpServlet.service(HttpServlet.java:738) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at javax.servlet.http.HttpServlet.service(HttpServlet.java:831) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1536) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:829) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:458) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.handleRequest(ServletWrapperImpl.java:175) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3742) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:276) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:929) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.ws.webcontainer.WSWebContainer.handleRequest(WSWebContainer.java:1583) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:178) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:455) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:384) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:272) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConnectionInitialReadCallback.java:214) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:113) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:138) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:204) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:775) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:905) [5/6/10 15:05:21:057 EDT] 00000017 SystemErr R at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1550) Here's the hibernate chatter. [5/6/10 15:05:20:651 EDT] 00000017 XmlBeanDefini I org.springframework.beans.factory.xml.XmlBeanDefinitionReader loadBeanDefinitions Loading XML bean definitions from class path resource [beans.xml] [5/6/10 15:05:20:823 EDT] 00000017 Configuration I org.slf4j.impl.JCLLoggerAdapter info configuring from url: file:/C:/workspaces/bampi/AlertReminderWS/WebContent/WEB-INF/classes/hibernate.cfg.xml [5/6/10 15:05:20:838 EDT] 00000017 Configuration I org.slf4j.impl.JCLLoggerAdapter info Configured SessionFactory: java:hibernate/Alert/SessionFactory1.0.3 [5/6/10 15:05:20:838 EDT] 00000017 AnnotationBin I org.hibernate.cfg.AnnotationBinder bindClass Binding entity from annotated class: com.bcbst.bamp.ws.model.MessageTarget [5/6/10 15:05:20:838 EDT] 00000017 EntityBinder I org.hibernate.cfg.annotations.EntityBinder bindTable Bind entity com.bcbst.bamp.ws.model.MessageTarget on table MessageTarget [5/6/10 15:05:20:854 EDT] 00000017 AnnotationBin I org.hibernate.cfg.AnnotationBinder bindClass Binding entity from annotated class: com.bcbst.bamp.ws.model.GrpExclusion [5/6/10 15:05:20:854 EDT] 00000017 EntityBinder I org.hibernate.cfg.annotations.EntityBinder bindTable Bind entity com.bcbst.bamp.ws.model.GrpExclusion on table GrpExclusion [5/6/10 15:05:20:854 EDT] 00000017 CollectionBin I org.hibernate.cfg.annotations.CollectionBinder bindOneToManySecondPass Mapping collection: com.bcbst.bamp.ws.model.MessageTarget.exclusions -> GrpExclusion [5/6/10 15:05:20:885 EDT] 00000017 AnnotationSes I org.springframework.orm.hibernate3.LocalSessionFactoryBean buildSessionFactory Building new Hibernate SessionFactory [5/6/10 15:05:20:901 EDT] 00000017 ConnectionPro I org.slf4j.impl.JCLLoggerAdapter info Initializing connection provider: org.springframework.orm.hibernate3.LocalDataSourceConnectionProvider [5/6/10 15:05:20:901 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info RDBMS: Microsoft SQL Server, version: 9.00.4035 [5/6/10 15:05:20:901 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info JDBC driver: Microsoft SQL Server 2005 JDBC Driver, version: 1.2.2828.100 [5/6/10 15:05:20:901 EDT] 00000017 Dialect I org.slf4j.impl.JCLLoggerAdapter info Using dialect: org.hibernate.dialect.SQLServerDialect [5/6/10 15:05:20:916 EDT] 00000017 TransactionFa I org.slf4j.impl.JCLLoggerAdapter info Transaction strategy: org.springframework.orm.hibernate3.SpringTransactionFactory [5/6/10 15:05:20:916 EDT] 00000017 TransactionMa I org.slf4j.impl.JCLLoggerAdapter info No TransactionManagerLookup configured (in JTA environment, use of read-write or transactional second-level cache is not recommended) [5/6/10 15:05:20:916 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info Automatic flush during beforeCompletion(): disabled [5/6/10 15:05:20:916 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info Automatic session close at end of transaction: disabled [5/6/10 15:05:20:916 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info Scrollable result sets: enabled [5/6/10 15:05:20:916 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info JDBC3 getGeneratedKeys(): enabled [5/6/10 15:05:20:916 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info Connection release mode: auto [5/6/10 15:05:20:916 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info Default batch fetch size: 1 [5/6/10 15:05:20:916 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info Generate SQL with comments: disabled [5/6/10 15:05:20:916 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info Order SQL updates by primary key: disabled [5/6/10 15:05:20:932 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info Order SQL inserts for batching: disabled [5/6/10 15:05:20:932 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info Query translator: org.hibernate.hql.ast.ASTQueryTranslatorFactory [5/6/10 15:05:20:932 EDT] 00000017 ASTQueryTrans I org.slf4j.impl.JCLLoggerAdapter info Using ASTQueryTranslatorFactory [5/6/10 15:05:20:932 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info Query language substitutions: {} [5/6/10 15:05:20:932 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info JPA-QL strict compliance: disabled [5/6/10 15:05:20:932 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info Second-level cache: enabled [5/6/10 15:05:20:932 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info Query cache: disabled [5/6/10 15:05:20:932 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info Cache region factory : org.hibernate.cache.impl.bridge.RegionFactoryCacheProviderBridge [5/6/10 15:05:20:932 EDT] 00000017 RegionFactory I org.slf4j.impl.JCLLoggerAdapter info Cache provider: org.hibernate.cache.NoCacheProvider [5/6/10 15:05:20:948 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info Optimize cache for minimal puts: disabled [5/6/10 15:05:20:948 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info Structured second-level cache entries: disabled [5/6/10 15:05:20:948 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info Statistics: disabled [5/6/10 15:05:20:948 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info Deleted entity synthetic identifier rollback: disabled [5/6/10 15:05:20:948 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info Default entity-mode: pojo [5/6/10 15:05:20:948 EDT] 00000017 SettingsFacto I org.slf4j.impl.JCLLoggerAdapter info Named query checking : enabled [5/6/10 15:05:20:979 EDT] 00000017 SessionFactor I org.slf4j.impl.JCLLoggerAdapter info building session factory [5/6/10 15:05:21:010 EDT] 00000017 SessionFactor I org.slf4j.impl.JCLLoggerAdapter info Factory name: java:hibernate/Alert/SessionFactory1.0.3 [5/6/10 15:05:21:010 EDT] 00000017 NamingHelper I org.slf4j.impl.JCLLoggerAdapter info JNDI InitialContext properties:{} [5/6/10 15:05:21:010 EDT] 00000017 NamingHelper I org.slf4j.impl.JCLLoggerAdapter info Creating subcontext: java:hibernate [5/6/10 15:05:21:010 EDT] 00000017 NamingHelper I org.slf4j.impl.JCLLoggerAdapter info Creating subcontext: Alert [5/6/10 15:05:21:010 EDT] 00000017 SessionFactor I org.slf4j.impl.JCLLoggerAdapter info Bound factory to JNDI name: java:hibernate/Alert/SessionFactory1.0.3 [5/6/10 15:05:21:026 EDT] 00000017 SessionFactor W org.slf4j.impl.JCLLoggerAdapter warn InitialContext did not implement EventContext [5/6/10 15:05:21:041 EDT] 00000017 PARSER E org.slf4j.impl.JCLLoggerAdapter error <AST>:0:0: unexpected end of subtree

Read the article

Diffence between FQL query and Graph API object access

- by jwynveen

What's the difference between accessing user data with the Facebook Graph API (http://graph.facebook.com/btaylor) and using the Graph API to make a FQL query of the same user (https://api.facebook.com/method/fql.query?query=QUERY). Also, does anyone know which of them the Facebook Developer Toolkit (for ASP.NET) uses? The reason I ask is because I'm trying to access the logged in user's birthday after they begin a Facebook Connect session on my site, but when I use the toolkit it doesn't return it. However, if I make a manual call to the Graph API for that user object, it does return it. It's possible I might have something wrong with my call from the toolkit. I think I may need to include the session key, but I'm not sure how to get it. Here's the code I'm using: _connectSession = new ConnectSession(APPLICATION_KEY, SECRET_KEY); try { if (!_connectSession.IsConnected()) { // Not authenticated, proceed as usual. statusResponse = "Please sign-in with Facebook."; } else { // Authenticated, create API instance _facebookAPI = new Api(_connectSession); // Load user user user = _facebookAPI.Users.GetInfo(); statusResponse = user.ToString(); ViewData["fb_user"] = user; } } catch (Exception ex) { //An error happened, so disconnect session _connectSession.Logout(); statusResponse = "Please sign-in with Facebook."; }

Read the article

How to get selected row index in JSF datatable?

- by Nitesh Panchal

I have a databale on index.xhtml <h:dataTable style="border: solid 2px black;" value="#{IndexBean.bookList}" var="item" binding="#{IndexBean.datatableBooks}"> <h:column> <h:commandButton value="Edit" actionListener="#{IndexBean.editBook}"> <f:param name="index" value="#{IndexBean.datatableBooks.rowIndex}"/> </h:commandButton> </h:column> </h:dataTable> My bean: @ManagedBean(name="IndexBean") @ViewScoped public class IndexBean implements Serializable { private HtmlDataTable datatableBooks; public HtmlDataTable getDatatableBooks() { return datatableBooks; } public void setDatatableBooks(HtmlDataTable datatableBooks) { this.datatableBooks = datatableBooks; } public void editBook() throws IOException{ int index = Integer.parseInt(FacesContext.getCurrentInstance().getExternalContext().getRequestParameterMap().get("index").toString()); System.out.println(index); } } My problem is that I always get the same index in server log even though I click the different edit buttons. Imagine that there is one collection which is supplied to the datatable. I have not shown that in bean. If I change scope from ViewScope to RequestScope it works fine. What can be the problem with @ViewScoped? Thanks in advance :) EDIT: <h:column> <h:commandButton value="Edit" actionListener="#{IndexBean.editBook}" /> </h:column> public void editBook(ActionEvent ev) throws IOException{ if (ev.getSource() != null && ev.getSource() instanceof HtmlDataTable) { HtmlDataTable objHtmlDataTable = (HtmlDataTable) ev.getSource(); System.out.println(objHtmlDataTable.getRowIndex()); } }

Read the article

Deselect dates in Web Calendar c#

- by yomismo

Hello, I'm trying to select and de-select dates on a C# Web Calendar control. The problem I have is that I can select or deselect dates except when there is only a single date selected. Clicking on it does not trigger the selection changed event, so Ineed to do something on the dayrender event but I'm not sure what or how. Any ideas? TIA Code so far: public static List<DateTime> list = new List<DateTime>(); protected void Calendar1_DayRender(object sender, DayRenderEventArgs e) { if (e.Day.IsSelected == true) { list.Add(e.Day.Date); } Session["SelectedDates"] = list; } protected void Calendar1_SelectionChanged(object sender, EventArgs e) { DateTime selection = Calendar1.SelectedDate; if (Session["SelectedDates"] != null) { List<DateTime> newList = (List<DateTime>)Session["SelectedDates"]; foreach (DateTime dt in newList) { Calendar1.SelectedDates.Add(dt); } if (searchdate(selection, newList)) { Calendar1.SelectedDates.Remove(selection); } list.Clear(); } } public bool searchdate(DateTime date, List<DateTime> dates) { var query = from o in dates where o.Date == date select o; if (query.ToList().Count == 0) { return false; } else { return true; } }

Read the article

Wix Custom Action problems

- by Grandpappy

I'm trying to create a custom action for my Wix install, and it's just not working, and I'm unsure why. Here's the bit in the appropriate Wix File: <Binary Id="INSTALLERHELPER" SourceFile=".\Lib\InstallerHelper.dll" /> <CustomAction Id="SQLHelperAction" BinaryKey="INSTALLERHELPER" DllEntry="CustomAction1" Execute="immediate" /> Here's the full class file for my custom action: using Microsoft.Deployment.WindowsInstaller; namespace InstallerHelper { public class CustomActions { [CustomAction] public static ActionResult CustomAction1(Session session) { session.Log("Begin CustomAction1"); return ActionResult.Success; } } } When I run the MSI, I get this error in the log: MSI (c) (08:5C) [10:08:36:978]: Connected to service for CA interface. MSI (c) (08:4C) [10:08:37:030]: Note: 1: 1723 2: SQLHelperAction 3: CustomAction1 4: C:\Users\NATHAN~1.TYL\AppData\Local\Temp\MSI684F.tmp Error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. Action SQLHelperAction, entry: CustomAction1, library: C:\Users\NATHAN~1.TYL\AppData\Local\Temp\MSI684F.tmp MSI (c) (08:4C) [10:08:38:501]: Product: SessionWorks :: Judge Edition -- Error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. Action SQLHelperAction, entry: CustomAction1, library: C:\Users\NATHAN~1.TYL\AppData\Local\Temp\MSI684F.tmp Action ended 10:08:38: SQLHelperAction. Return value 3. DEBUG: Error 2896: Executing action SQLHelperAction failed. The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2896. The arguments are: SQLHelperAction, , Neither of the two error codes or messages it gives me is enough to tell me what's wrong. Or perhaps I'm just not understanding what they're saying is wrong. Any ideas on what I'm doing wrong?

Search Results

Search found 10564 results on 423 pages for 'stateful session bean'.

Page 173/423 | < Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180 | Next Page >

- by Jimmy Hoffa

- by Henry Gomersall

- by Monica Kumar

- by pieter.humphrey

- by Dave Ballantyne

- by Lionel Dubreuil

- by Frank Nimphius

- by Jason Crease

- by Tori Wieldt

- by Joe Mayo

- by arungupta

- by Tony Berk

- by arungupta

- by robokev

- by Damien Carru

- by imran_ku07

- by ramesh m

- by TaMeR

- by gerry

- by stiank81

- by dharga

- by jwynveen

- by Nitesh Panchal

- by yomismo

- by Grandpappy

< Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180 | Next Page >