synchronized block - Page 173

Why does display:table-cell not center content without display:table?

- by Samuel

I'm looking for the most efficient (or elegant) way to vertically and horizontally center content of variable height. I've come up with this: http://cssdeck.com/t/2veysdkg/16, which uses css tables to vertically center the main content. My demands for writing this particular piece of code were: Must be able to center variable and fixed width content vertically and horizontally Centered content must be inside the normal document flow (so no overlapping) Sticky footer and normal header of 100% width As few hacks, ugly code or non-semantic html as possible I didn't care about support for IE6, IE7 (I'll use a different stylesheet for them) The weird thing is that the demands above are only met when the header and footer are set to table-row, and the body-tag to display:table. Which is weird because as I understand it the css will generate anonymous table elements when parent table elements are missing. So table-cell should work without all the surrounding elements, but yet I've not been able to make it work. If it were up to me I would prefer to not mess with the display mode for the body tag, and leave the header and footer on display:block. But I've not been able to make it work. Does anyone understand why this doesn't work?

Read the article

C#: Why Decorate When You Can Intercept

- by James Michael Hare

We've all heard of the old Decorator Design Pattern (here) or used it at one time or another either directly or indirectly. A decorator is a class that wraps a given abstract class or interface and presents the same (or a superset) public interface but "decorated" with additional functionality. As a really simplistic example, consider the System.IO.BufferedStream, it itself is a descendent of System.IO.Stream and wraps the given stream with buffering logic while still presenting System.IO.Stream's public interface: 1: Stream buffStream = new BufferedStream(rawStream); Now, let's take a look at a custom-code example. Let's say that we have a class in our data access layer that retrieves a list of products from a database: 1: // a class that handles our CRUD operations for products 2: public class ProductDao 3: { 4: ... 5: 6: // a method that would retrieve all available products 7: public IEnumerable<Product> GetAvailableProducts() 8: { 9: var results = new List<Product>(); 10: 11: // must create the connection 12: using (var con = _factory.CreateConnection()) 13: { 14: con.ConnectionString = _productsConnectionString; 15: con.Open(); 16: 17: // create the command 18: using (var cmd = _factory.CreateCommand()) 19: { 20: cmd.Connection = con; 21: cmd.CommandText = _getAllProductsStoredProc; 22: cmd.CommandType = CommandType.StoredProcedure; 23: 24: // get a reader and pass back all results 25: using (var reader = cmd.ExecuteReader()) 26: { 27: while(reader.Read()) 28: { 29: results.Add(new Product 30: { 31: Name = reader["product_name"].ToString(), 32: ... 33: }); 34: } 35: } 36: } 37: } 38: 39: return results; 40: } 41: } Yes, you could use EF or any myriad other choices for this sort of thing, but the germaine point is that you have some operation that takes a non-trivial amount of time. What if, during the production day I notice that my application is performing slowly and I want to see how much of that slowness is in the query versus my code. Well, I could easily wrap the logic block in a System.Diagnostics.Stopwatch and log the results to log4net or other logging flavor of choice: 1: // a class that handles our CRUD operations for products 2: public class ProductDao 3: { 4: private static readonly ILog _log = LogManager.GetLogger(typeof(ProductDao)); 5: ... 6: 7: // a method that would retrieve all available products 8: public IEnumerable<Product> GetAvailableProducts() 9: { 10: var results = new List<Product>(); 11: var timer = Stopwatch.StartNew(); 12: 13: // must create the connection 14: using (var con = _factory.CreateConnection()) 15: { 16: con.ConnectionString = _productsConnectionString; 17: 18: // and all that other DB code... 19: ... 20: } 21: 22: timer.Stop(); 23: 24: if (timer.ElapsedMilliseconds > 5000) 25: { 26: _log.WarnFormat("Long query in GetAvailableProducts() took {0} ms", 27: timer.ElapsedMillseconds); 28: } 29: 30: return results; 31: } 32: } In my eye, this is very ugly. It violates Single Responsibility Principle (SRP), which says that a class should only ever have one responsibility, where responsibility is often defined as a reason to change. This class (and in particular this method) has two reasons to change: If the method of retrieving products changes. If the method of logging changes. Well, we could “simplify” this using the Decorator Design Pattern (here). If we followed the pattern to the letter, we'd need to create a base decorator that implements the DAOs public interface and forwards to the wrapped instance. So let's assume we break out the ProductDAO interface into IProductDAO using your refactoring tool of choice (Resharper is great for this). Now, ProductDao will implement IProductDao and get rid of all logging logic: 1: public class ProductDao : IProductDao 2: { 3: // this reverts back to original version except for the interface added 4: } 5: And we create the base Decorator that also implements the interface and forwards all calls: 1: public class ProductDaoDecorator : IProductDao 2: { 3: private readonly IProductDao _wrappedDao; 4: 5: // constructor takes the dao to wrap 6: public ProductDaoDecorator(IProductDao wrappedDao) 7: { 8: _wrappedDao = wrappedDao; 9: } 10: 11: ... 12: 13: // and then all methods just forward their calls 14: public IEnumerable<Product> GetAvailableProducts() 15: { 16: return _wrappedDao.GetAvailableProducts(); 17: } 18: } This defines our base decorator, then we can create decorators that add items of interest, and for any methods we don't decorate, we'll get the default behavior which just forwards the call to the wrapper in the base decorator: 1: public class TimedThresholdProductDaoDecorator : ProductDaoDecorator 2: { 3: private static readonly ILog _log = LogManager.GetLogger(typeof(TimedThresholdProductDaoDecorator)); 4: 5: public TimedThresholdProductDaoDecorator(IProductDao wrappedDao) : 6: base(wrappedDao) 7: { 8: } 9: 10: ... 11: 12: public IEnumerable<Product> GetAvailableProducts() 13: { 14: var timer = Stopwatch.StartNew(); 15: 16: var results = _wrapped.GetAvailableProducts(); 17: 18: timer.Stop(); 19: 20: if (timer.ElapsedMilliseconds > 5000) 21: { 22: _log.WarnFormat("Long query in GetAvailableProducts() took {0} ms", 23: timer.ElapsedMillseconds); 24: } 25: 26: return results; 27: } 28: } Well, it's a bit better. Now the logging is in its own class, and the database logic is in its own class. But we've essentially multiplied the number of classes. We now have 3 classes and one interface! Now if you want to do that same logging decorating on all your DAOs, imagine the code bloat! Sure, you can simplify and avoid creating the base decorator, or chuck it all and just inherit directly. But regardless all of these have the problem of tying the logging logic into the code itself. Enter the Interceptors. Things like this to me are a perfect example of when it's good to write an Interceptor using your class library of choice. Sure, you could design your own perfectly generic decorator with delegates and all that, but personally I'm a big fan of Castle's Dynamic Proxy (here) which is actually used by many projects including Moq. What DynamicProxy allows you to do is intercept calls into any object by wrapping it with a proxy on the fly that intercepts the method and allows you to add functionality. Essentially, the code would now look like this using DynamicProxy: 1: // Note: I like hiding DynamicProxy behind the scenes so users 2: // don't have to explicitly add reference to Castle's libraries. 3: public static class TimeThresholdInterceptor 4: { 5: // Our logging handle 6: private static readonly ILog _log = LogManager.GetLogger(typeof(TimeThresholdInterceptor)); 7: 8: // Handle to Castle's proxy generator 9: private static readonly ProxyGenerator _generator = new ProxyGenerator(); 10: 11: // generic form for those who prefer it 12: public static object Create<TInterface>(object target, TimeSpan threshold) 13: { 14: return Create(typeof(TInterface), target, threshold); 15: } 16: 17: // Form that uses type instead 18: public static object Create(Type interfaceType, object target, TimeSpan threshold) 19: { 20: return _generator.CreateInterfaceProxyWithTarget(interfaceType, target, 21: new TimedThreshold(threshold, level)); 22: } 23: 24: // The interceptor that is created to intercept the interface calls. 25: // Hidden as a private inner class so not exposing Castle libraries. 26: private class TimedThreshold : IInterceptor 27: { 28: // The threshold as a positive timespan that triggers a log message. 29: private readonly TimeSpan _threshold; 30: 31: // interceptor constructor 32: public TimedThreshold(TimeSpan threshold) 33: { 34: _threshold = threshold; 35: } 36: 37: // Intercept functor for each method invokation 38: public void Intercept(IInvocation invocation) 39: { 40: // time the method invocation 41: var timer = Stopwatch.StartNew(); 42: 43: // the Castle magic that tells the method to go ahead 44: invocation.Proceed(); 45: 46: timer.Stop(); 47: 48: // check if threshold is exceeded 49: if (timer.Elapsed > _threshold) 50: { 51: _log.WarnFormat("Long execution in {0} took {1} ms", 52: invocation.Method.Name, 53: timer.ElapsedMillseconds); 54: } 55: } 56: } 57: } Yes, it's a bit longer, but notice that: This class ONLY deals with logging long method calls, no DAO interface leftovers. This class can be used to time ANY class that has an interface or virtual methods. Personally, I like to wrap and hide the usage of DynamicProxy and IInterceptor so that anyone who uses this class doesn't need to know to add a Castle library reference. As far as they are concerned, they're using my interceptor. If I change to a new library if a better one comes along, they're insulated. Now, all we have to do to use this is to tell it to wrap our ProductDao and it does the rest: 1: // wraps a new ProductDao with a timing interceptor with a threshold of 5 seconds 2: IProductDao dao = TimeThresholdInterceptor.Create<IProductDao>(new ProductDao(), 5000); Automatic decoration of all methods! You can even refine the proxy so that it only intercepts certain methods. This is ideal for so many things. These are just some of the interceptors we've dreamed up and use: Log parameters and returns of methods to XML for auditing. Block invocations to methods and return default value (stubbing). Throw exception if certain methods are called (good for blocking access to deprecated methods). Log entrance and exit of a method and the duration. Log a message if a method takes more than a given time threshold to execute. Whether you use DynamicProxy or some other technology, I hope you see the benefits this adds. Does it completely eliminate all need for the Decorator pattern? No, there may still be cases where you want to decorate a particular class with functionality that doesn't apply to the world at large. But for all those cases where you are using Decorator to add functionality that's truly generic. I strongly suggest you give this a try!

Read the article

Java Road Trip: Code to Coast

- by Tori Wieldt

tweetmeme_url = 'http://blogs.oracle.com/javaone/2010/06/java_road_trip_code_to_coast.html'; Share .FBConnectButton_Small{background-position:-5px -232px !important;border-left:1px solid #1A356E;} .FBConnectButton_Text{margin-left:12px !important ;padding:2px 3px 3px !important;} The Java Road Trip: Code to CoastJava developers, architects, programmers, and enthusiasts: get ready for a real adrenaline rush! Follow the Java Road Trip: Code to Coast as this high-tech block party on wheels travels to 20 cities across the United States showcasing Oracle's commitment to everything Java. It's a chance to talk to Java leaders and engineers and get your hands on the latest Java technology. The Java Road Trip kicks off June 14 in New York City with Octavian Tanase, Vice President, Java Platform Group at Oracle, headlining the event. Don't miss EJBs in Boston! Governance in Washington, DC! Swing(ing) in Memphis! Mile-high UIs in Denver! Java in Seattle! (too easy) and more!Join or follow the tour here: http://java.com/roadtrip/Read the Oracle Magazine articleUse or follow the hash tag #javaroadtrip

Read the article

Hardening network with sysctl settings made Wi-fi downloading speed extremely slow

- by Rohit Bansal

I just followed up following steps to harden network security The /etc/sysctl.conf file contain all the sysctl settings. Prevent source routing of incoming packets and log malformed IP's enter the following in a terminal window: sudo vi /etc/sysctl.conf Edit the `/etc/sysctl.conf` file and un-comment or add the following lines : # IP Spoofing protection net.ipv4.conf.all.rp_filter = 1 net.ipv4.conf.default.rp_filter = 1 # Ignore ICMP broadcast requests net.ipv4.icmp_echo_ignore_broadcasts = 1 # Disable source packet routing net.ipv4.conf.all.accept_source_route = 0 net.ipv6.conf.all.accept_source_route = 0 net.ipv4.conf.default.accept_source_route = 0 net.ipv6.conf.default.accept_source_route = 0 # Ignore send redirects net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 # Block SYN attacks net.ipv4.tcp_syncookies = 1 net.ipv4.tcp_max_syn_backlog = 2048 net.ipv4.tcp_synack_retries = 2 net.ipv4.tcp_syn_retries = 5 # Log Martians net.ipv4.conf.all.log_martians = 1 net.ipv4.icmp_ignore_bogus_error_responses = 1 # Ignore ICMP redirects net.ipv4.conf.all.accept_redirects = 0 net.ipv6.conf.all.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 net.ipv6.conf.default.accept_redirects = 0 # Ignore Directed pings net.ipv4.icmp_echo_ignore_all = 1 To reload sysctl with the latest changes, enter: sudo sysctl -p But, after applying the changes I found "Wi-fi" downloading speed and terminal downloading speed extremely slow (less than 1KB/s) however surfing speed through browser was good. But, using direct ethernet cable was giving a good speed. Then, I reverted back the above changes and things fall back in line once again.... Could you please let me know what possibly in above script is affecting such behaviour [and why] ? How could I still maintain hardening of network security without disturbing Wi-fi downloading speed ?

Read the article

Blog/CMS software with editing style like Stack Exchange

- by Merlyn Morgan-Graham

I have been updating a Wordpress blog lately and found the turnaround time for content creation and editing is much worse than for Stack Overflow posts. Part of this has to do with being original compositions rather than riffing off a question. But part of it is the software. I am looking for CMS/blog software that has an overall editing experience similar to Stack Overflow. The most important features I'm looking for: Inline editing (mostly) Real-time preview on the same page are all important features for speeding up data entry. Markdown support (with inline and block-level code support) Syntax hilighting The features I must maintain from my self-hosted Wordpress: Somewhat popular/supported software, with extensibility support Self hostable Will work with MySql Wordpress has plugins for all these, but they don't necessarily work together. For example I've found a few markdown-on-save plugins, but I doubt those have a chance of ever supporting inline editing or real time previews. Also the most popular syntax hilighting plugins don't support inline code blocks, and I doubt previews would work with other syntax hilighting methods. If I get a wiki/web page content creation system along with it, or somehow integrate this into GitHub (with all the features I requested) I'll accept those as side benefits :) Formed as a question: Are there any pieces of content creation software for making a blog that support an editing style like Stack Exchange and Stack Overflow? Or magic combinations of Wordpress plugins that offer the same?

Read the article

Inheritance versus Composition in a business application

- by ProfK

I have a training management and tracking system, with a high level structure as follows: We have a Role1, e.g. Manager, Shift-boss, miner, etc. and a Candidate, training for that Role. The role has a list of courses and their subjects the candidate needs to complete to qualify for the role. Candidate has a TrainingHistory attribute, containing the courses and subjects they have completed, their results, and the date completed. Now I see it as a TrainingHistoryCourse is-a Course, extended to add DateCompleted etc. but something is nagging at me to rather use something like a TrainingHistoryRecord that has-a Course. How can I further analyse this to determine which pattern to use? Then, a Role has a list of RoleTask definitions that the Candidate must be observed practising, and a Candidate has a history of RoleTaskObservation objects recording their performance at these tasks. This is very similar to the course/subject requirement and history pattern for the candidate, except for one less hierarchical level, but, a RoleTaskObservation clearly does not have an is-a relationship with RoleTask, unless I block my nose and rather use ObservedRoleTask. I would prefer to use the same pattern for both subject/course and task/observation structures, but I think that would force me to adopt a composition pattern for TrainingHistoryCourse. What is the wisdom here? Always inherit where possible and validated by a solid is-a association, or always favour composition wherever possible? 1 Client specified this to be called JobTitle, but he isn't writing the app, and a JobTitle is only one attribute of a Role. Authorization roles are handled by the DevExpress framework and its customization hooks, so there would be very little little confusion between a business Role in my domain objects and an authorization role in lower level, framework code.

Read the article

Soft 404 error on redirected outbound links

- by Techlands

I have a redirect script on my site which sends visitors to an affiliate site. However in the last month I've noticed that Google webmaster tools is reporting my outbound links as a 404 error. Here is the breakdown on how its setup: My outbound links are coded like this: <a href="/f/c123" rel="nofollow" target="_blank">Link Title</a> My redirect script will then perform a 302 redirect to the affiliate link Originally I had the affiliate links (CJ) directly in the HTML, however I noticed over time that this had some impact on my sites traffic. So I changed them to a redirect script and my traffic returned. This seemed to work with no issues for over 1 year but now I'm getting soft 404 errors in Google webmaster tools. I did try adding a rule in my robots.txt to block any links starting with /f/ but I'm not sure if this will help or Google will still report soft 404 errors. I am considering as possible options to change the a tag to a button tag and use an onclick event to load the link.

Read the article

[MINI HOW-TO] Disable Third Party Extensions in Internet Explorer

- by Mysticgeek

Are you looking for a way to make browsing to sites you’re not sure of in Internet Explorer a bit more secure? Here we take a quick look at how to disable third-party extensions in IE. Open up Internet Explorer and click on Tools then select Internet Options… Under Internet Properties click on the Advanced tab and under Settings scroll down and uncheck Enable third-party browser extensions and click Ok. Now restart IE and the extensions will be disabled. You can then re-enable them when you know a site can be trusted and you want to be able to use its services. This will help avoid malware when you visit a site that wants to install an extension and you’re not sure about it. Similar Articles Productive Geek Tips Block Third-Party Cookies in IE7Mysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPRemove PartyPoker (Or Other Items) from the Internet Explorer Tools MenuDisable Tabbed Browsing in Internet Explorer 7Make Ctrl+Tab in Internet Explorer 7 Use Most Recent Order TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Find Downloads and Add-ins for Outlook Recycle ! Find That Elusive Icon with FindIcons Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa !

Read the article

CodePlex Daily Summary for Monday, August 13, 2012

CodePlex Daily Summary for Monday, August 13, 2012Popular ReleasesDeForm: DeForm v1.0: Initial Version Support for: GaussianBlur effect ConvolveMatrix effect ColorMatrix effect Morphology effectLiteBlog (MVC): LiteBlog 1.31: Features of this release Windows8 styled UI Namespace and code refactoring Resolved the deployment issues in the previous release Added documentation Help file Help file is HTML based built using SandCastle Help file works in all browsers except IE10Self-Tracking Entity Generator for WPF and Silverlight: Self-Tracking Entity Generator v 2.0.0 for VS11: Self-Tracking Entity Generator for WPF and Silverlight v 2.0.0 for Entity Framework 5.0 and Visual Studio 2012Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.6.0: New Stuff ImageTile Control - think People Tile MicrophoneRecorder - Coding4Fun.Phone.Audio GzipWebClient - Coding4Fun.Phone.Net Serialize - Coding4Fun.Phone.Storage this is code I've written countless times. JSON.net is another alternative ChatBubbleTextBox - Added in Hint TimeSpan languages added: Pl Bug Fixes RoundToggleButton - Enable Visual State not being respected OpacityToggleButton - Enable Visual State not being respected Prompts VS Crash fix for IsPrompt=true More...AssaultCube Reloaded: 2.5.2 Unnamed: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to pack it. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) Added 3rd person Added mario jumps Fixed nextprimary code exploit ...NPOI: NPOI 2.0: New features a. Implement OpenXml4Net (same as System.Packaging from Microsoft). It supports both .NET 2.0 and .NET 4.0 b. Excel 2007 read/write library (NPOI.XSSF) c. Word 2007 read/write library(NPOI.XWPF) d. NPOI.SS namespace becomes the interface shared between XSSF and HSSF e. Load xlsx template and save as new xlsx file (partially supported) f. Diagonal line in cell both in xls and xlsx g. Support isRightToLeft and setRightToLeft on the common spreadsheet Sheet interface, as per existin...BugNET Issue Tracker: BugNET 1.1: This release includes bug fixes from the 1.0 release for email notifications, RSS feeds, and several other issues. Please see the change log for a full list of changes. http://support.bugnetproject.com/Projects/ReleaseNotes.aspx?pid=1&m=76 Upgrade Notes The following changes to the web.config in the profile section have occurred: Removed <add name="NotificationTypes" type="String" defaultValue="Email" customProviderData="NotificationTypes;nvarchar;255" />Added <add name="ReceiveEmailNotifi...ClosedXML - The easy way to OpenXML: ClosedXML 0.67.0: Conditional formats now accept formulas. Major performance improvement when opening files with merged ranges. Misc fixes.Virtual Keyboard: Virtual Keyboard v2.0 Source Code: This release has a few added keys that were missing in the earlier versions.Visual Rx: V 2.0.20622.9: help will be available at my blog http://blogs.microsoft.co.il/blogs/bnaya/archive/2012/08/12/visual-rx-toc.aspx the SDK is also available though NuGet (search for VisualRx) http://nuget.org/packages/VisualRx if you want to make sure that the Visual Rx Viewer can monitor on your machine, you can install the Visual Rx Tester and run it while the Viewer is running.????: ????2.0.5: 1、?????????????。RiP-Ripper & PG-Ripper: PG-Ripper 1.4.01: changes NEW: Added Support for Clipboard Function in Mono Version NEW: Added Support for "ImgBox.com" links FIXED: "PixHub.eu" links FIXED: "ImgChili.com" links FIXED: Kitty-Kats Forum loginPlayer Framework by Microsoft: Player Framework for Windows 8 (Preview 5): Support for Smooth Streaming SDK beta 2 Support for live playback New bitrate meter and SD/HD indicators Auto smooth streaming track restriction for snapped mode to conserve bandwidth New "Go Live" button and SeekToLive API Support for offset start times Support for Live position unique from end time Support for multiple audio streams (smooth and progressive content) Improved intellisense in JS version Support for Windows 8 RTM ADDITIONAL DOWNLOADSSmooth Streaming Client SD...Media Companion: Media Companion 3.506b: This release includes an update to the XBMC scrapers, for those who prefer to use this method. There were a number of behind-the-scene tweaks to make Media Companion compatible with the new TMDb-V3 API, so it was considered important to get it out to the users to try it out. Please report back any important issues you might find. For this reason, unless you use the XBMC scrapers, there probably isn't any real necessity to download this one! The only other minor change was one to allow the mc...NVorbis: NVorbis v0.3: Fix Ogg page reader to correctly handle "split" packets Fix "zero-energy" packet handling Fix packet reader to always merge packets when needed Add statistics properties to VorbisReader.Stats Add multi-stream API (for Ogg files containing multiple Vorbis streams)System.Net.FtpClient: System.Net.FtpClient 2012.08.08: 2012.08.08 Release. Several changes, see commit notes in source code section. CHM help as well as source for this release are included in the download. Remember that Windows 7 by default (and possibly older versions) will block you from opening the CHM by default due to trust settings. To get around the problem, right click on the CHM, choose properties and click the Un-block button. Please note that this will be the last release tested to compile with the .net 2.0 framework. I will be remov...Isis2 Cloud Computing Library: Isis2 Alpha V1.1.967: This is an alpha pre-release of the August 2012 version of the system. I've been testing and fixing many problems and have also added a new group "lock" API (g.Lock("lock name")/g.Unlock/g.Holder/g.SetLockPolicy); with this, Isis2 can mimic Chubby, Google's locking service. I wouldn't say that the system is entirely stable yet, and I haven't rechecked every single problem I had seen in May/June, but I think it might be good to get some additional use of this release. By now it does seem to...JSON C# Class Generator: JSON CSharp Class Generator 1.3: Support for native JSON.net serializer/deserializer (POCO) New classes layout option: nested classes Better handling of secondary classesAxiom 3D Rendering Engine: v0.8.3376.12322: Changes Since v0.8.3102.12095 ===================================================================== Updated ndoc3 binaries to fix bug Added uninstall.ps1 to nuspec packages fixed revision component in version numbering Fixed sln referencing VS 11 Updated OpenTK Assemblies Added CultureInvarient to numeric parsing Added First Visual Studio 2010 Project Template (DirectX9) Updated SharpInputSystem Assemblies Backported fix for OpenGL Auto-created window not responding to input Fixed freeInterna...DotSpatial: DotSpatial 1.3: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Tutorials are available. Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components ...New Projects.NET Weather Component: NET Weather is a component that will allow you to query various weather services for forcasts, current observations, etc..AxisProvider: Axis is a .NET reactive extensions based subscription and publication framework.Blawkay Hockey: Some xna testing i'm doing.Bolt Browser: Browse the web with ease. You'll never meet a browser more simple, friendly and easy to use. Blaze through the web the way it should be. Fast and beautiful.dotHTML: dotHTML provides a .NET-based DOM for HTML and CSS, facilitating code-driven creation of Web data.Fake DbConnection for Unit Testing EF Code: Unit test Entity Framework 4.3+ and confirm you have valid LINQ-to-Entities code without any need for a database connection.FNHMVC: FNHMVC is an architectural foundation for building maintainable web applications with ASP.NET, MVC, NHibernate & Autofac.FreeAgentMobile: FreeAgentMobile is a Windows Phone project intended to provide access to the FreeAgent Accounting application.Lexer: Generate a lexical analyzer (lexer) for a custom grammar by editing a T4 template.LibXmlSocket: XmlSocket LibraryMaxAlarm: This progect i create for my friend Igor.Minecraft Text Splitter: This tool was made to assist you in writing Minecraft books by splitting text into 255-byte pages and auto-copying it for later pasting into Minecraft.MxPlugin: MxPlugin is a project which demonstrates the calling of functions contained in DLLs both statically and dynamically. Parser: Generate a parser for a custom grammar by editing a T4 template.Sliding Boxes Windows Phone Game source code: .SmartSpider: ??????Http???????????，????????、??、???????。techsolittestpro: This project is testting project of codeplexThe Tiff Library - Fast & Simple .Net Tiff Library: The Tiff Library - Fast & Simple .Net Tiff LibraryVirtualizingWrapPanel: testVisual Rx: Visual Rx is a bundle of API and a Viewer which can monitor and visualize Rx datum stream (at run-time).we7T: testWebForms Transverse Library: This projet is aimed to compile best practices in ASP .NET WebForms development as generic tools working with UI components from various origins.

Read the article

How should code reviews be Carried Out?

- by Graviton

My previous question has to do with how to advance code reviews among the developers. Here I am interested in how a code review session should be carried out, so that both the reviewer and reviewed are feeling comfortable with it. I have done some code reviews before and the experience has been very unpleasant. My previous manager would come to us --on an ad hoc basis-- and tell us to explain our code to him. Since he wasn't very familiar with the code base, whenever he would ask me to explain my code, I'd find myself spending a huge amount of time explaining the most basic structure of my code. As a result, each review would last much too long, and the process would leave both of us exhausted. Once I was done explaining my work, he would continue by raising issues with it. Most of the issues he raised were cosmetic in nature ( e.g, don't use region for this code block, change the variable name from xxx to yyy even though the later makes even less sense, and so on). After trying this process for few rounds, we found the review session didn't derive much benefits for either of us, and we stopped. How would you go about making each code review a natural, enjoyable, thought stimulating, bug-fixing and mutual-learning experience? Also, how frequently you do your code reviews - as soon as the code is checked in? Do you allocate a fixed time every week to do this? What are the guidelines that you follow during your code reviews?

Read the article

Use Your Chart-Drawing Skills to Win a Free Chrome Cr-48 Notebook

- by ETC

Today Google announced that they are partnering with a number of Chrome web application developers to distribute a number of their Chrome OS Notebooks to lucky fans. That’s when we noticed something interesting that can greatly increase your odds of getting one. Unlike Box, MOG, and Zoho, who are doing random giveaways, the LucidChart giveaway is based on a contest of skill – they are picking the best drawings using their flowchart tool and giving away Chrome Notebooks to the winners. So all you have to do is create one of the most interesting drawings / charts, and you will get your hands on one. We’ve also confirmed this with the fine people at LucidChart, who told us “any user who spends a bit of time and effort to do something creative has a good shot at winning one.” How great is the Chrome Cr-48 Notebook? What’s it all about? We wouldn’t know, since Google hasn’t given us here at How-To Geek an opportunity to use one, despite our attempts. It’s sad, since we’re huge fans of the Chrome browser, that we can’t share our Chrome notebook experiences with hundreds of thousands of daily subscribers and millions of monthly visitors. Hint. Hint. Win a Chrome Cr-48 notebook from LucidChart [LucidChart] Latest Features How-To Geek ETC How To Create Your Own Custom ASCII Art from Any Image How To Process Camera Raw Without Paying for Adobe Photoshop How Do You Block Annoying Text Message (SMS) Spam? How to Use and Master the Notoriously Difficult Pen Tool in Photoshop HTG Explains: What Are the Differences Between All Those Audio Formats? How To Use Layer Masks and Vector Masks to Remove Complex Backgrounds in Photoshop Bring Summer Back to Your Desktop with the LandscapeTheme for Chrome and Iron The Prospector – Home Dash Extension Creates a Whole New Browsing Experience in Firefox KinEmote Links Kinect to Windows Why Nobody Reads Web Site Privacy Policies [Infographic] Asian Temple in the Snow Wallpaper 10 Weird Gaming Records from the Guinness Book

Read the article

Calculating Screen Resolutions Using WPF

- by Jeff Ferguson

WPF measures all elements in device independent pixels (DIPs). These DIPs equate to device pixels if the current display monitor is set to the default of 96 DPI. However, for monitors set to a DPI setting that is different than 96 DPI, then WPF DIPs will not correspond directly to monitor pixels. Consider, for example, the WPF properties SystemParameters.PrimaryScreenHeight and SystemParameters.PrimaryScreenWidth. If your monitor resolution is set to 1024 pixels wide by 768 pixels high, and your monitor is set to 96 DPI, then WPF will report the value of SystemParameters.PrimaryScreenHeight as 768 and the value of SystemParameters.PrimaryScreenWidth as 1024. No problem. This aligns nicely because the WPF device independent pixel value (96) matches your monitor's DPI setting (96). However, if your monitor is not set to display pixels at 96 DPI, then SystemParameters.PrimaryScreenHeight and SystemParameters.PrimaryScreenWidth will not return what you expect. The values returned by these properties may be greater than or less than what you expect, depending on whether or not your monitor's DPI value is less than or greater than 96. Since the SystemParameters.PrimaryScreenHeight and SystemParameters.PrimaryScreenWidth properties are WPF properties, their values are measured in WPF DIPs, rather than taking monitor DPI into effect. Once again: WPF measures all elements in device independent pixels (DIPs). To combat this issue, you must take your monitor's DPI settings into effect if you're looking for the monitor's width and height using the monitor's DPI settings. The handy code block below will help you calculate these values regardless of the DPI setting on your monitor: Window MainWindow = Application.Current.MainWindow; PresentationSource MainWindowPresentationSource = PresentationSource.FromVisual(MainWindow); Matrix m = MainWindowPresentationSource.CompositionTarget.TransformToDevice; DpiWidthFactor = m.M11; DpiHeightFactor = m.M22; double ScreenHeight = SystemParameters.PrimaryScreenHeight * DpiHeightFactor; double ScreenWidth = SystemParameters.PrimaryScreenWidth * DpiWidthFactor; The values of ScreenHeight and ScreenWidth should, after this code is executed, match the resolution that you see in the display's Properties window.

Read the article

Apache VERY high page load time

- by Aaron Waller

My Drupal 6 site has been running smoothly for years but recently has experienced intermittent periods of extreme slowness (10-60 sec page loads). Several hours of slowness followed by hours of normal (4-6 sec) page loads. The page always loads with no error, just sometimes takes forever. My setup: Windows Server 2003 Apache/2.2.15 (Win32) Jrun/4.0 PHP 5 MySql 5.1 Drupal 6 Cold fusion 9 Vmware virtual environment DMZ behind a corporate firewall Traffic: 1-3 hits/sec avg Troubleshooting No applicable errors in apache error log No errors in drupal event log Drupal devel module shows 242 queries in 366.23 milliseconds,page execution time 2069.62 ms. (So it looks like queries and php scripts are not the problem) NO unusually high CPU, memory, or disk IO Cold fusion apps, and other static pages outside of drupal also load slow webpagetest.org test shows very high time-to-first-byte The problem seems to be with Apache responding to requests, but previously I've only seen this behavior under 100% cpu load. Judging solely by resource monitoring, it looks as though very little is going on. Here is the kicker - roughly half of the site's access comes from our LAN, but if I disable the firewall rule and block access from outside of our network, internal (LAN) access (1000+ devices) is speedy. But as soon as outside access is restored the site is crippled. Apache config? Crawlers/bots? Attackers? I'm at the end of my rope, where should I be looking to determine where the problem lies?

Read the article

How to get ip-address out of SPAMHAUS blacklist?

- by ???????? ????? ???????????

I frequently read that it is possible to remove individual ip-addresses from SPAMHAUS blacklisting. OK. Here is 91.205.43.252 (91.205.43.251 - 91.205.43.253) used by back3.stopspamers.com (back2.stopspamers.com, back1.stopspamers.com) in geo-cluster on dedicated servers in Switzerland. The queries: http://www.spamhaus.org/query/bl?ip=91.205.43.251 http://www.spamhaus.org/query/bl?ip=91.205.43.252 http://www.spamhaus.org/query/bl?ip=91.205.43.253 tell that: 91.205.43.251 - 91.205.43.253 are all listed in the SBL80808 blacklist And SBL80808 blacklist tells: "Ref: SBL80808 91.205.40.0/22 is listed on the Spamhaus Block List (SBL) 01-Apr-2010 05:52 GMT | SR04 Spamming and now seems this place is involved in other fraud" 91.205.43.251-91.205.43.253 are not listed amongst criminal ip-addresses individually but there is no way to remove it individually from black listing. How to remove this individual (91.205.43.251-91.205.43.253) addresses from SPAMHAUS blacklist? And why the heck SPAMHAUS is blacklisting spam-stopping service? This is only one example of a bunch. My related posts: Blacklist IP database Update: From the answer provided I realized that my question was not even understood. This ip-addresses 91.205.43.251 - 91.205.43.253 are not blacklisted individually, they are blacklisted through its supernet 91.205.40.0/22. Also note that dedicated server, ISP and customer are in much different distant countries. Update2: http://www.spamhaus.org/sbl/sbl.lasso?query=SBL80808#removal tells: "To have record SBL80808 (91.205.40.0/22) removed from the SBL, the Abuse/Security representative of RIPE (or the Internet Service Provider responsible for supplying connectivity to 91.205.40.0/22) needs to contact the SBL Team" There are dozens of "abusers" in that blacklist SBL80808. The company using that dedicated server is not an ISP or RIPE representative to treat these issues. Even if to treat it, it is just a matter of pressing "Report spam" on internet to be again blacklisted, this is fruitless approach. These techniques are broadly used by criminals and spammers, See also this my post on blacklisting. This is just one specific example but there are many-many more.

Read the article

Munq is for web, Unity is for Enterprise

- by oazabir

The Unity Application Block (Unity) is a lightweight extensible dependency injection container with support for constructor, property, and method call injection. It’s a great library for facilitating Inversion of Control and the recent version supports AOP as well. However, when it comes to performance, it’s CPU hungry. In fact it’s so CPU hungry that it makes it impossible to make it work at Internet Scale. I was investigating some CPU issue on a portal that gets around 3MM hits per day and I found unusually high CPU. Here’s why: I did some CPU profiling on my open source project Dropthings and found that the highest CPU is consumed by Unity’s Resolve<>(). There’s no funky use of Unity in the project. Straightforward Register<>() and Resolve<>(). But as you can see, Resolve<>() is consuming significantly high CPU even after the site is warm and has been running for a while. Then I tried Munq, which is a basic Dependency Injection Container. It has everything you will usually need in a regular project. It boasts to be the fastest DI out there. So, I converted all Unity code to Munq in Dropthings and did a CPU profile and Whala! There’s no trace of any Munq calls anywhere. That proves Munq is a lot faster than Unity.

Read the article

Organizations & Architecture UNISA Studies – Chap 7

- by MarkPearl

Learning Outcomes Name different device categories Discuss the functions and structure of I/.O modules Describe the principles of Programmed I/O Describe the principles of Interrupt-driven I/O Describe the principles of DMA Discuss the evolution characteristic of I/O channels Describe different types of I/O interface Explain the principles of point-to-point and multipoint configurations Discuss the way in which a FireWire serial bus functions Discuss the principles of InfiniBand architecture External Devices An external device attaches to the computer by a link to an I/O module. The link is used to exchange control, status, and data between the I/O module and the external device. External devices can be classified into 3 categories… Human readable – e.g. video display Machine readable – e.g. magnetic disk Communications – e.g. wifi card I/O Modules An I/O module has two major functions… Interface to the processor and memory via the system bus or central switch Interface to one or more peripheral devices by tailored data links Module Functions The major functions or requirements for an I/O module fall into the following categories… Control and timing Processor communication Device communication Data buffering Error detection I/O function includes a control and timing requirement, to coordinate the flow of traffic between internal resources and external devices. Processor communication involves the following… Command decoding Data Status reporting Address recognition The I/O device must be able to perform device communication. This communication involves commands, status information, and data. An essential task of an I/O module is data buffering due to the relative slow speeds of most external devices. An I/O module is often responsible for error detection and for subsequently reporting errors to the processor. I/O Module Structure An I/O module functions to allow the processor to view a wide range of devices in a simple minded way. The I/O module may hide the details of timing, formats, and the electro mechanics of an external device so that the processor can function in terms of simple reads and write commands. An I/O channel/processor is an I/O module that takes on most of the detailed processing burden, presenting a high-level interface to the processor. There are 3 techniques are possible for I/O operations Programmed I/O Interrupt[t I/O DMA Access Programmed I/O When a processor is executing a program and encounters an instruction relating to I/O it executes that instruction by issuing a command to the appropriate I/O module. With programmed I/O, the I/O module will perform the requested action and then set the appropriate bits in the I/O status register. The I/O module takes no further actions to alert the processor. I/O Commands To execute an I/O related instruction, the processor issues an address, specifying the particular I/O module and external device, and an I/O command. There are four types of I/O commands that an I/O module may receive when it is addressed by a processor… Control – used to activate a peripheral and tell it what to do Test – Used to test various status conditions associated with an I/O module and its peripherals Read – Causes the I/O module to obtain an item of data from the peripheral and place it in an internal buffer Write – Causes the I/O module to take an item of data form the data bus and subsequently transmit that data item to the peripheral The main disadvantage of this technique is it is a time consuming process that keeps the processor busy needlessly I/O Instructions With programmed I/O there is a close correspondence between the I/O related instructions that the processor fetches from memory and the I/O commands that the processor issues to an I/O module to execute the instructions. Typically there will be many I/O devices connected through I/O modules to the system – each device is given a unique identifier or address – when the processor issues an I/O command, the command contains the address of the address of the desired device, thus each I/O module must interpret the address lines to determine if the command is for itself. When the processor, main memory and I/O share a common bus, two modes of addressing are possible… Memory mapped I/O Isolated I/O (for a detailed explanation read page 245 of book) The advantage of memory mapped I/O over isolated I/O is that it has a large repertoire of instructions that can be used, allowing more efficient programming. The disadvantage of memory mapped I/O over isolated I/O is that valuable memory address space is sued up. Interrupts driven I/O Interrupt driven I/O works as follows… The processor issues an I/O command to a module and then goes on to do some other useful work The I/O module will then interrupts the processor to request service when is is ready to exchange data with the processor The processor then executes the data transfer and then resumes its former processing Interrupt Processing The occurrence of an interrupt triggers a number of events, both in the processor hardware and in software. When an I/O device completes an I/O operations the following sequence of hardware events occurs… The device issues an interrupt signal to the processor The processor finishes execution of the current instruction before responding to the interrupt The processor tests for an interrupt – determines that there is one – and sends an acknowledgement signal to the device that issues the interrupt. The acknowledgement allows the device to remove its interrupt signal The processor now needs to prepare to transfer control to the interrupt routine. To begin, it needs to save information needed to resume the current program at the point of interrupt. The minimum information required is the status of the processor and the location of the next instruction to be executed. The processor now loads the program counter with the entry location of the interrupt-handling program that will respond to this interrupt. It also saves the values of the process registers because the Interrupt operation may modify these The interrupt handler processes the interrupt – this includes examination of status information relating to the I/O operation or other event that caused an interrupt When interrupt processing is complete, the saved register values are retrieved from the stack and restored to the registers Finally, the PSW and program counter values from the stack are restored. Design Issues Two design issues arise in implementing interrupt I/O Because there will be multiple I/O modules, how does the processor determine which device issued the interrupt? If multiple interrupts have occurred, how does the processor decide which one to process? Addressing device recognition, 4 general categories of techniques are in common use… Multiple interrupt lines Software poll Daisy chain Bus arbitration For a detailed explanation of these approaches read page 250 of the textbook. Interrupt driven I/O while more efficient than simple programmed I/O still requires the active intervention of the processor to transfer data between memory and an I/O module, and any data transfer must traverse a path through the processor. Thus is suffers from two inherent drawbacks… The I/O transfer rate is limited by the speed with which the processor can test and service a device The processor is tied up in managing an I/O transfer; a number of instructions must be executed for each I/O transfer Direct Memory Access When large volumes of data are to be moved, an efficient technique is direct memory access (DMA) DMA Function DMA involves an additional module on the system bus. The DMA module is capable of mimicking the processor and taking over control of the system from the processor. It needs to do this to transfer data to and from memory over the system bus. DMA must the bus only when the processor does not need it, or it must force the processor to suspend operation temporarily (most common – referred to as cycle stealing). When the processor wishes to read or write a block of data, it issues a command to the DMA module by sending to the DMA module the following information… Whether a read or write is requested using the read or write control line between the processor and the DMA module The address of the I/O device involved, communicated on the data lines The starting location in memory to read from or write to, communicated on the data lines and stored by the DMA module in its address register The number of words to be read or written, communicated via the data lines and stored in the data count register The processor then continues with other work, it delegates the I/O operation to the DMA module which transfers the entire block of data, one word at a time, directly to or from memory without going through the processor. When the transfer is complete, the DMA module sends an interrupt signal to the processor, this the processor is involved only at the beginning and end of the transfer. I/O Channels and Processors Characteristics of I/O Channels As one proceeds along the evolutionary path, more and more of the I/O function is performed without CPU involvement. The I/O channel represents an extension of the DMA concept. An I/O channel ahs the ability to execute I/O instructions, which gives it complete control over I/O operations. In a computer system with such devices, the CPU does not execute I/O instructions – such instructions are stored in main memory to be executed by a special purpose processor in the I/O channel itself. Two types of I/O channels are common A selector channel controls multiple high-speed devices. A multiplexor channel can handle I/O with multiple characters as fast as possible to multiple devices. The external interface: FireWire and InfiniBand Types of Interfaces One major characteristic of the interface is whether it is serial or parallel parallel interface – there are multiple lines connecting the I/O module and the peripheral, and multiple bits are transferred simultaneously serial interface – there is only one line used to transmit data, and bits must be transmitted one at a time With new generation serial interfaces, parallel interfaces are becoming less common. In either case, the I/O module must engage in a dialogue with the peripheral. In general terms the dialog may look as follows… The I/O module sends a control signal requesting permission to send data The peripheral acknowledges the request The I/O module transfers data The peripheral acknowledges receipt of data For a detailed explanation of FireWire and InfiniBand technology read page 264 – 270 of the textbook

Read the article

Cannot connect Ubunto to Windows pc either direction

- by Frank A

New to ubuntu and really struggling with this. I want to connect to my old windows XP Pc on our home network. Searching for solutions gets complicated as at one level you are told use Connect to Server. I set to Windows Share, type in server IP address.. ... I get "Failed to retrieve share list from server" Demo on Youtube worked with no problem. Other advice in ask ubuntu is you need to install samba. Did that but nothing seems to happen when I try and run it other than it asking for admin password. (How do you tell what is running on Ubuntu?) So I try the other direction Windows XP to Ubuntu. I made the ubuntu directory within home frank shared and tried various combination such as \ipaddress\home\frank but just "The folder you entered does not appear to be valid. Please choose another." My entire data only drive is shared in Windows and no problems accessing that from other Win XP boxes on our network There are no alerts in Windows firewall, Ubuntu Firestarter did block but changed that to allowed... or so I thought. In firestarter I had set up Inbound traffic policy 192.168.1.1/24. And since then it has added the ip address of the win pc twice. So, I am in a state of confusion not knowing whedre to turn next so thought Ask Ubuntu :)

Read the article

CodePlex Daily Summary for Tuesday, July 29, 2014

CodePlex Daily Summary for Tuesday, July 29, 2014Popular ReleasesArtezio SharePoint 2013 Workflow Activities: SharePoint Designer 2013 custom workflow actions 1.0: SharePoint Designer 2013 custom workflow actions that work with permissions. Add Role Assignment Add Role Assignments Delete Role Assignments Get Role Definition Id Get Role Definition Id By Role Type Id Reset Role Inheritance Artezio SharePoint Consulting & DevelopmentVG-Ripper & PG-Ripper: PG-Ripper 1.4.32: changes NEW: Added Support for 'ImgMega.com' links NEW: Added Support for 'ImgCandy.net' links NEW: Added Support for 'ImgPit.com' links NEW: Added Support for 'Img.yt' links FIXED: 'Radikal.ru' links FIXED: 'ImageTeam.org' links FIXED: 'ImgSee.com' links FIXED: 'Img.yt' linksAsp.Net MVC-4,Entity Framework and JQGrid Demo with Todo List WebApplication: Asp.Net MVC-4,Entity Framework and JQGrid Demo: Asp.Net MVC-4,Entity Framework and JQGrid Demo with simple Todo List WebApplication, Overview TodoList is a simple web application to create, store and modify Todo tasks to be maintained by the users, which comprises of following fields to the user (Task Name, Task Description, Severity, Target Date, Task Status). TodoList web application is created using MVC - 4 architecture, code-first Entity Framework (ORM) and Jqgrid for displaying the data.Waterfox: Waterfox 31.0 Portable: New features in Waterfox 31.0: Added support for Unicode 7.0 Experimental support for WebCL New features in Firefox 31.0:New Add the search field to the new tab page Support of Prefer:Safe http header for parental control mozilla::pkix as default certificate verifier Block malware from downloaded files Block malware from downloaded files audio/video .ogg and .pdf files handled by Firefox if no application specified Changed Removal of the CAPS infrastructure for specifying site-sp...SuperSocket, an extensible socket server framework: SuperSocket 1.6.3: The changes below are included in this release: fixed an exception when collect a server's status but it has been stopped fixed a bug that can cause an exception in case of sending data when the connection dropped already fixed the log4net missing issue for a QuickStart project fixed a warning in a QuickStart projectYnote Classic: Ynote Classic 2.8.5 Beta: Several Changes - Multiple Carets and Multiple Selections - Improved Startup Time - Improved Syntax Highlighting - Search Improvements - Shell Command - Improved StabilityDatabase Schema Reader: v1.3.4.0: Contents DatabaseSchemaReader.dll - Class library (.net3.5) DatabaseSchemaViewer.exe - UI to read and view database schemas; options to generate SQL and code; option to compare another schema CopyToSQLite/CopyToSQLite.exe - UI to copy any database schema and data to SQLite or, if installed, SQL Server CE 4.0 net4/DatabaseSchemaReader.dll - .Net 4.0 class library This Release Schema Reading (MySQL)- reads UNSIGNED integers (available in the schema model's DatabaseColumn.DbDataType prope...TEBookConverter: 1.2: Fixed: Could not start convertion in some cases Fixed: Progress show during convertion was truncated Fixed: Stopping convertion didn't reset program titleQ2Cue \\: Q2Cue v. 0.85: Initial release.CS-Script Source: Release v3.8.4: CSScript.Evaluator is migrated to Mono v3.3.0 Added aggregating //css_ignore_ns from the imported scripts cs-script.7z - CS-Script Suite (binaries, documentation, samples) cs-script.ExtensionPack.7z - CS-Script Extension Pack (additional binaries and samples) cs-scriptDocs.7z - CS-Script DocumentationDotSpatial: DotSpatial 1.7: DotSpatial.Full - includes all DotSpatial libraries, extensions and DemoMap application DotSpatial.Core - includes only DotSpatial core libraries Entire list of changes see in the issue tracker. Main changes: Improved common stability, optimized memory and speed when loading and rendering shapefiles, fixed some memory leaks in rasters and shape layers. Simplified plugin infrastructure. Now there are predefined implementations for all required components (IStatusControl, IDockManager, IHead...NRepository: NRepository 2.2: NuGetNRepository packages are available from NuGet.org: NRepository.Core: Install-Package NRepository.Core NRepository.EntityFramework: Install-Package NRepository.EntityFramework NRepository.TestKit: Install-Package NRepository.TestKit Contoso University Sample Projects Added 3 versions of Contoso University sample code added: ContosoUniversityOriginal - This is the original Microsoft sample project for Entity Framework. ContosoUniversityUsingNRepository - This version simply repl...InstagramSaver: 1.5: Added: An option to wait between downloads to prevent ban from server Improved: File downloading performance Improved: File checking performancePVReportDeployer: PVReportDeployer 1.0: PVReportDeployer 1.0AD4 Application Designer for flow based .NET applications: AD4.AppDesigner.23.20: AD4.Iteration.23.20(Advanced Rendering Features) Option to render name of flow pins within flow chart (AlarmClockSample.10.ad4 used to test this extension): MainWindow extended by adding FlowChartShowFlowPinCaptionsComboBox ConfigureUIControls customized ManageFlowChartShowFlowPinCaptionsOptionFlow customized Parameter FlowChartFlowPins replaced FlowChartFlowPinCaptions in AD4.AppDesigner.cfg RenderFlowPinsCaptions customized to use the parameter ToDo: Some tutorials are unfinished b...CRM 2013 One Click Navigation: CRM2013OneClickNavigation_1_0_0_3_managed.zip: Fixes on Security PrivilegesAutomatedLab: AutomatedLab 2.1.0.0: 2.1.0 Support for external virtual switches CaRoot is a new role for installing Root Certificate Authorities Root domain controllers are installed in parallel now 2.0.0 Now supports also Windows Server 2008 R2 and 7 No longer the limit of just having one client and one server operating system Rewrite of the code that handles VHDs Lots of bug fixing Changed that parameter definition of some cmdlets in AutomatedLabDefinition and also adapted the sample scripts Now the Forest...BizTalk Deployment Utilities: 1.0.0.0: Draft VersionGroupMe Software Development Kit: GroupMe .NET SDK v1.0.1: Small update concerning the /users/me endpoint to get the currently authenticated user info. Documentation is available here: http://dotnetcorner.ch/Projects/GroupMe-NET-SDK/DocumentationOneNote Tagging Kit: OneNoteTaggingKit Add-In 2.4.5316.33833: New Features in this ReleaseThe Find Pages dialog preserves search string and tag filter selection on search scope changes Other ChangesDialog windows restored when action button is pressed while windows is minimized Code cleanup and simplification Code documentation Created some reusable UI controls Tags styling made more pleasant (I hope) Tag tooltips improved on the Find Pages dialog : Added dedicated tooltips to the page count and selection indicator of tags Closing open dial...New ProjectsCognitum ASP.NET Providers for Cassandra: Cassandra Providers is a ASP.NET solution that uses the Cassandra Database data source for a custom Membership, Role, Profile, an Session-State providers.DG Mobile: Simples aplicação para inserção, visualização e emissão de relatório de atividades relacionadas ao DG.Dynamics AX Development tools: Several AX Development related tools combined into one configurable packages: TFS Workspace, DEV_Tools, and X++ Editor components.E Drawing Library for WinRT: E Drawing Library for WinRT lets you create graphic rich Windows Store Apps easily, giving you all the power of Direct2D with simple classes and methods.EFramework.DataAccess: Summary ????freetalkserver: This php server, user can register!gicon: gicon is a project to help you to generate avatar/icon by hash (MD5, SHA1) or random hex string (such as GUID)hOOt - Full text search: Full text search engine built from scratch using bitmap indexesMelodyUI - Library for HTML, CSS & JS Development: MelodyUI is a set of classes and helpers that let us to create Web Applications. MelodyUI is lightweight and don't have any dependency.nRF24L01Plus .NETMF driver: nRF24L01, .NET MFNyan: Beginning...Prince Game Xna: Prince of Persia Net Game in Xna Game StudioSmartsby: Combining several small business web app's information into a single dashboard.Super snippets: Super snippets para Visual StudioTCP/IP Adapter BizTalk 2013: BizTalk 2013 TCP/IP community adapter. This is an updated version of the TCP/IP adapter for BizTalk, for use with BizTalk 2013.testMercurial: summaryUnit OF Work With Sql Helper: This project is intended to provide a simple data access object for SQL Server with repository and Unit of Work pattern.VisualRegEx: Prototype. Experimenting regex parsing, graph layout, etc.WDK Hardware Development Boards Add-On: Scripts for working with windows compatible hardware development boards like the Sharks Cove?????? 2014????????: ???????????????、????、????、??????、????、????????,????????、?????????,?????。?????? 2014????????: ????????????,????,??????????? ???? ???? ?????????,???,??,?????!???? 2014????????: ?????????????、????、????、??????、????、???????,?????,?????????!????? 2014???????: ????????????????,?????????????。????????????,???????,???????,?????,?????????? 2014????????: ?????????????????、????、??????、????????,????????????,???????????！??????? 2014???????: ??????????????????,??????????????、???????、???????、???????、?????！??????? 2014????????: ?????????????????????,????????????????,????????????????,??????！????? 2014????????: ?????????????????????????,???????????,????????,??????????????????????????? 2014????????: ??????????????????????,????“???????,???????”?????,????????????！?????? 2014???????: ?????????????????,????,????,??????,????“????、????、????、????”????????,??????.?????? 2014????????: ?????????????????"????,????"???,????????????????????????,??????????????。?????? 2014????????: ??????????????:????,????,????,???????,????????,??????:????????,?????!???? 2014????????: ????????????????????????,???????????????,????????????????！???? 2014?????????: ??????????????????,?????????????,???????????.????????????,????????????!?????? 2014??????: ??????????????:????,????,????,???????,????????,??????:????????,?????!?????? 2014??????: ?????????????????,???????????????。?????????????,???????,?????????。????? 2014???????: ????????????????"????,????"???,????????????????????????,??????????????。????? 2014??????: ???????????????????,?????????????,???????????.????????????,????????????!????? 2014???????: ?????????????????????????,???????????????,????????????????！?????? ????????: ??????????????300??,????????、???????、????、????????、?????,??????:????,????,???????！?????? ????????: ??????????????????,?????,???，???、???、?????,???,?????,??????????????????? ???????????: ??????????????????,?????????。????????????,??????,????,????,?????????！????? ???????: ????????????????????????，?????、???、????，????，???、???、???、???、???，????，?????！????? ???????: ????????????????????,????????,????????,????,????,??????，???????!????? ???????: ???????????????,??????????????????,????????,??????????????、????。?????? 2014????????: ????????????????????,????????:??、??、???,?????????????????????!?????? ????????: ????????????????6?,???????????????????????????,??????????????,?????????！?????? ??????: ????????????????8?，????????,????????,??????????,?????,????? ,????????!?????? ???????: ?????????????????????????????、????、????、???????????,????,????!????? 2014???????: ???????????、???、??、??????????????????????????????,????????????????!?????? 2014????????: ????????????????????????、??????,????、?????、????， ?????????，?????????????！?????? ????????: ?????????????????????、????、????、??????、???????,??????、??????。?????? ???????: ??????????????????,???????、????、????、??????、???????,??????,???????????。???? ????????: ??????,??????,?????????????????????,???????????????????????。???? ???????: ??????????????,???????、???????????,????????,????,?????????,??????,??????!?????? ????????: ?????????????????,?????????????。?????????,???????,???????,?????????????。?????? ????????: ????????????????、??????、??????、??????、??????、?????、??????、????、????、????????！????? ???????: ???????????????????,??????????????,???????????,??????,????,??????,??????。????? ???????: ?????????????!???????????,??????,????,?????????????,????????,??????,????,?????...?????? ???????: ????????????、??、???????????,??????,????????,??????????????????...?????????? ????????: ??????????????,??????????????,?????????,????,????,??????。???? ?????: ????????????、?????????,?????????,????,????????,????????????????!????? 2014??????????: ???????????????????,?????,???????,???????????,??????! ????? 2014?????????: ???????????????????,?????????????????????,?????,????,???????.

Read the article

Ubuntu 12.04 + Raid0 + Windows 7 not loading

- by Douglas

please someone help me.... (Sorry for my english) Hi, I have a Pc with 2 Hd (1Tb each) on Raid0. I had a Windows 7 64bits working for several months. When I installed the Windows I let a 100Gb partition empty to install Ubuntu someday. I was using Linux on a Virtualbox, but this week I tried to install Ubuntu 12.04 in this 100Gb partition. I used the Ubuntu alternate cd, because the 'normal' cd was giving me trouble with the Raid0. The grub installation always reported a error. After a lot of work I found that I nedded to install grub on partition /dev/mapper/isw_chjbfeec_DougRaid1 (see Bootinfo below). The Windows installation created a 100Mb boot partition, so I needed to install grub in this partition. Now I have the Ubuntu working 100% ok. The problem is, the Windows is not booting! The windows option is present on the grub menu, but when I choose the windows option there is a black screen and after that the grub is reloaded. My Bootinfo is: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for /boot/grub. => Grub2 (v1.99) is installed in the MBR of /dev/mapper/isw_chjbfeec_DougRaid and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for /boot/grub. sda1: __________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' sda2: __________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' mount: unknown filesystem type '' sda3: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: isw_chjbfeec_DougRaid1: ________________________________________________________ File system: ntfs Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of isw_chjbfeec_DougRaid1 and looks at sector 3841862992 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. No errors found in the Boot Parameter Block. Operating System: Boot files: /grldr /bootmgr /Boot/BCD /grldr isw_chjbfeec_DougRaid2: ________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /Windows/System32/winload.exe isw_chjbfeec_DougRaid3: ________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: isw_chjbfeec_DougRaid5: ________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img isw_chjbfeec_DougRaid6: ________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/sda2 206,848 3,686,402,047 3,686,195,200 7 NTFS / exFAT / HPFS /dev/sda3 3,686,402,558 3,907,039,743 220,637,186 5 Extended Invalid MBR Signature found. EBR refers to a location outside the hard drive. /dev/sda2 ends after the last sector of /dev/sda /dev/sda3 ends after the last sector of /dev/sda Drive: isw_chjbfeec_DougRaid _____________________________________________________________________ Disk /dev/mapper/isw_chjbfeec_DougRaid: 2000.4 GB, 2000404348928 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907039744 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/mapper/isw_chjbfeec_DougRaid1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/mapper/isw_chjbfeec_DougRaid2 206,848 3,686,402,047 3,686,195,200 7 NTFS / exFAT / HPFS /dev/mapper/isw_chjbfeec_DougRaid3 3,686,402,558 3,907,039,743 220,637,186 5 Extended /dev/mapper/isw_chjbfeec_DougRaid5 3,686,402,560 3,881,876,479 195,473,920 83 Linux /dev/mapper/isw_chjbfeec_DougRaid6 3,881,876,992 3,907,039,743 25,162,752 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/mapper/isw_chjbfeec_DougRaid1 C89C73D19C73B910 ntfs Reservado pelo Sistema /dev/mapper/isw_chjbfeec_DougRaid2 6830883A3088116C ntfs /dev/mapper/isw_chjbfeec_DougRaid5 bbab868a-ea53-4be3-ba7d-2737fe6cb24c ext4 /dev/mapper/isw_chjbfeec_DougRaid6 7a830a3c-88fb-4cba-80dc-f32e08abfd5b swap /dev/sda isw_raid_member /dev/sdb isw_raid_member /dev/sr0 iso9660 Windows7x86x64SK ========================= "ls -R /dev/mapper/" output: ========================= /dev/mapper: control isw_chjbfeec_DougRaid isw_chjbfeec_DougRaid1 isw_chjbfeec_DougRaid2 isw_chjbfeec_DougRaid3 isw_chjbfeec_DougRaid5 isw_chjbfeec_DougRaid6 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/mapper/isw_chjbfeec_DougRaid5 / ext4 (rw,errors=remount-ro) /dev/sr0 /media/Windows7x86x64SK iso9660 (ro,nosuid,nodev,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500,uhelper=udisks) ================= isw_chjbfeec_DougRaid1/grldr embedded menu: ================== -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- ================== isw_chjbfeec_DougRaid5/boot/grub/grub.cfg: ================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="$1" if [ "$1" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-24-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux /boot/vmlinuz-3.2.0-24-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic-pae } menuentry 'Ubuntu, with Linux 3.2.0-24-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c echo 'Loading Linux 3.2.0-24-generic-pae ...' linux /boot/vmlinuz-3.2.0-24-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-24-generic-pae } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 3.2.0-23-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux /boot/vmlinuz-3.2.0-23-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-23-generic-pae } menuentry 'Ubuntu, with Linux 3.2.0-23-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c echo 'Loading Linux 3.2.0-23-generic-pae ...' linux /boot/vmlinuz-3.2.0-23-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-23-generic-pae } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober_proxy ### menuentry "Windows 7 (loader) (on /dev/mapper/isw_chjbfeec_DougRaid1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(sda,msdos1)' search --no-floppy --fs-uuid --set=root C89C73D19C73B910 chainloader +1 } ### END /etc/grub.d/30_os-prober_proxy ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- ====================== isw_chjbfeec_DougRaid5/etc/fstab: ======================= -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/isw_chjbfeec_DougRaid5 / ext4 errors=remount-ro 0 1 /dev/mapper/isw_chjbfeec_DougRaid6 none swap sw 0 0 -------------------------------------------------------------------------------- ========== isw_chjbfeec_DougRaid5: Location of files loaded by Grub: =========== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.2.0-23-generic-pae 2 = boot/initrd.img-3.2.0-24-generic-pae 2 = boot/vmlinuz-3.2.0-23-generic-pae 1 = boot/vmlinuz-3.2.0-24-generic-pae 1 = initrd.img 2 = initrd.img.old 2 = vmlinuz 1 = vmlinuz.old 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda1 Unknown BootLoader on sda2 Unknown BootLoader on sda3 =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt hexdump: /dev/sda1: No such file or directory hexdump: /dev/sda1: No such file or directory hexdump: /dev/sda2: No such file or directory hexdump: /dev/sda2: No such file or directory hexdump: /dev/sda3: No such file or directory hexdump: /dev/sda3: No such file or directory xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in How we can see the Windows part at grub is: menuentry "Windows 7 (loader) (on /dev/mapper/isw_chjbfeec_DougRaid1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(sda,msdos1)' search --no-floppy --fs-uuid --set=root C89C73D19C73B910 chainloader +1 } I tried a lot of combinations at the line: set root='(sda,msdos1)' , but no success I tried to change uuid to the /dev/mapper/isw_chjbfeec_DougRaid2 uuid, but the grub reports a error. I dont know what to do now. I really need to boot my windows partition. Someone knows what to do? Thanks........

Read the article

Do or can robots cause considerable performance issues?

- by Anicho

So the question in the title is exactly what I am trying to find out. My case is: At work we are in a discussion with team members who seem to think bots will cause us problems relating to performance when running on our services website. Out setup: Lets say I have site www.mysite.co.uk this is a shop window to our online services which sit on www.mysiteonline.co.uk. When people search in google for mysite they see mysiteonline.co.uk as well as mysite.co.uk. Cases against stopping bots crawling: We don't store gb's of data publicly available on the web Most friendly bots, if they were to cause issues would have done so already In our instance the bots can't crawl the site because it requires username & password Stopping bots with robot .txt causes an issue with seo (ref.1) If it was a malicious bot, it would ignore robot.txt or meta tags anyway Ref 1. If we were to block mysiteonline.co.uk from having robots crawl this will affect seo rankings and make it inconvenient for users who actively search for mysite to find mysiteonline. Which we can prove is the case for a good portion of our users.

Read the article

BizTalk Pipeline Component Error: "Object reference not set to an instance of an object"

- by Stuart Brierley

Yesterday I posted about my BizTalk Archiving Pipeline Component, which can be found on Codeplex if anyone is interested in taking a look. During testing of this component I began to encounter an error whereby the component would throw an "Object reference not set to an instance of an object" error when processing as a part of a Custom Pipeline. This was occurring when the component was reading a ReadOnlySeekableStream so that the data can be archived to file, but the actual code throwing the error was somewhere in the depths of the Microsoft.BizTalk.Streaming stack. It turns out that there is a known issue where this exception can be thrown because the garbage collector has disposed of of the stream before execution of the custom pipeline has completed. To get around this you need to add the streams in your code to the pipeline context resource tracker. So a block of my code goes from: originalStrm = bodyPart.GetOriginalDataStream(); if (!originalStrm.CanSeek) { ReadOnlySeekableStream seekableStream = new ReadOnlySeekableStream(originalStrm); inmsg.BodyPart.Data = seekableStream; originalStrm = inmsg.BodyPart.Data; } fileArchive = new FileStream(FullPath, FileMode.Create, FileAccess.Write); binWriter = new BinaryWriter(fileArchive); byte[] buffer = new byte[bufferSize]; int sizeRead = 0; while ((sizeRead = originalStrm.Read(buffer, 0, bufferSize)) != 0) { binWriter.Write(buffer, 0, sizeRead); } to originalStrm = bodyPart.GetOriginalDataStream(); if (!originalStrm.CanSeek) { ReadOnlySeekableStream seekableStream = new ReadOnlySeekableStream(originalStrm); inmsg.BodyPart.Data = seekableStream; originalStrm = inmsg.BodyPart.Data; } pc.ResourceTracker.AddResource(originalStrm); fileArchive = new FileStream(FullPath, FileMode.Create, FileAccess.Write); binWriter = new BinaryWriter(fileArchive); byte[] buffer = new byte[bufferSize]; int sizeRead = 0; while ((sizeRead = originalStrm.Read(buffer, 0, bufferSize)) != 0) { binWriter.Write(buffer, 0, sizeRead); } So far this seems to have solved the issue, the error is no more, and my archive component is continuing its way through testing.

Read the article

CodePlex Daily Summary for Friday, August 01, 2014

CodePlex Daily Summary for Friday, August 01, 2014Popular ReleasesQuickMon: Version 3.20: Added a 'Directory Services Query' collector agent. This collector allows for querying Active Directory using simple DirectorySearcher queries.Grunndatakvalitet: Initial working: Show Altinn metadata in Excel. To get a live list you need to run the sql script on a server and update the connection string in ExcelMultiple Threads TCP Server: Project: this Project is based on VS 2013, .net freamwork 4.0, you can open it by vs 2010 or laterEssence#: Philemon-2 (Alpha Build 18): The Philemon-2 release fixes bugs, most of which have to do with the binding of .Net assemblies. Configuration profiles have been added in order to help solve some of the .Net assembly binding issues. A configuration profile is persistently stored as a folder in the filesystem. It must be located in the folder %EssenceSharpPath%\Config. The folder name must use ".profile" as its file extension. A configuration profile folder may (optionally) contain one or more files--each with its own form...DataBind: DataBind 1.0: - Efficiency ImprovedConsole Progress Bar: ConsoleProgressBar-0.3: - Validate ProgressInPercentageSpace Engineers Server Manager: SESM V1.10: V1.10 - New auto update system ! You won't miss any SE Update now ^^ To learn more : https://sesm.codeplex.com/wikipage?title=Activating%20the%20auto%20update%20system - Moved the serve-wide configuration options to an other file than web.config. It should solve the "my parametters are errased by each SESM update" ! Warning ! If you upgrade from any previous version, you will need to copy-pase your parameters from your old web.config into the new SESM.config (this file is generated by acc...Accesorios de sitios Torrent en Español para Synology Download Station: Pack de Torrents en Español 6.0.0: Agregado los módulos de DivXTotal, el módulo de búsqueda depende del de alojamiento para bajar las series Utiliza el rss: http://www.divxtotal.com/rss.php DbEntry.Net (Leafing Framework): DbEntry.Net 4.2: DbEntry.Net is a lightweight Object Relational Mapping (ORM) database access compnent for .Net 4.0+. It has clearly and easily programing interface for ORM and sql directly, and supoorted Access, Sql Server, MySql, SQLite, Firebird, PostgreSQL and Oracle. It also provide a Ruby On Rails style MVC framework. Asp.Net DataSource and a simple IoC. DbEntry.Net.v4.2.Setup.zip include the setup package. DbEntry.Net.v4.2.Src.zip include source files and unit tests. DbEntry.Net.v4.2.Samples.zip ...Recaptcha for .NET: Recaptcha for .NET v1.5: What's NewMinor bug fixes Support for legacy .NET framework 4.0 and ASP.NET MVC 4. Support for .NET Framework 4.5.1.Azure Storage Explorer: Azure Storage Explorer 6 Preview 1: Welcome to Azure Storage Explorer 6 Preview 1 This is the first release of the latest Azure Storage Explorer, code-named Phoenix. What's New?Here are some important things to know about version 6: Open Source Now being run as a full open source project. Full source code on CodePlex. Collaboration encouraged! Updated Code Base Brand-new code base (WPF/C#/.NET 4.5) Visual Studio 2013 solution (previously VS2010) Uses the Task Parallel Library (TPL) for asynchronous background operat...Wsus Package Publisher: release v1.3.1407.29: Updated WPP to recognize the very latest console version. Some files was missing into the latest release of WPP which lead to crash when trying to make a custom update. Add a workaround to avoid clipboard modification when double-clicking on a label when creating a custom update. Add the ability to publish detectoids. (This feature is still in a BETA phase. Packages relying on these detectoids to determine which computers need to be updated, may apply to all computers).SSIS Connector for Sharepoint Online: Sharepoint_Online_ConnectorsV2.3.5: V2.3.5 Removed validation for user name where it was accepting user name with only ".com" V2.3.1 Added support for column with string array type. (For source only) V2.3 Added support for delete operation. just map ID columns and choose operation type as "Delete" Any other Operation Type will be taken as Insert\Update MultiUser type will be taken as User field and single user will be added, still figuring out how to add multi user field (whatever available on internet not helping :( ) V2.2 ...Artezio SharePoint 2013 Workflow Activities for VS & Actions for Designer: SharePoint Designer 2013 custom workflow actions 1.0: SharePoint Designer 2013 custom workflow actions that work with permissions. Add Role Assignment Add Role Assignments Delete Role Assignments Get Role Definition Id Get Role Definition Id By Role Type Id Reset Role Inheritance Artezio SharePoint Consulting & DevelopmentVG-Ripper & PG-Ripper: PG-Ripper 1.4.32: changes NEW: Added Support for 'ImgMega.com' links NEW: Added Support for 'ImgCandy.net' links NEW: Added Support for 'ImgPit.com' links NEW: Added Support for 'Img.yt' links FIXED: 'Radikal.ru' links FIXED: 'ImageTeam.org' links FIXED: 'ImgSee.com' links FIXED: 'Img.yt' linksAsp.Net MVC-4,Entity Framework and JQGrid Demo with Todo List WebApplication: Asp.Net MVC-4,Entity Framework and JQGrid Demo: Asp.Net MVC-4,Entity Framework and JQGrid Demo with simple Todo List WebApplication, Overview TodoList is a simple web application to create, store and modify Todo tasks to be maintained by the users, which comprises of following fields to the user (Task Name, Task Description, Severity, Target Date, Task Status). TodoList web application is created using MVC - 4 architecture, code-first Entity Framework (ORM) and Jqgrid for displaying the data.Waterfox: Waterfox 31.0 Portable: New features in Waterfox 31.0: Added support for Unicode 7.0 Experimental support for WebCL New features in Firefox 31.0:New Add the search field to the new tab page Support of Prefer:Safe http header for parental control mozilla::pkix as default certificate verifier Block malware from downloaded files Block malware from downloaded files audio/video .ogg and .pdf files handled by Firefox if no application specified Changed Removal of the CAPS infrastructure for specifying site-sp...SuperSocket, an extensible socket server framework: SuperSocket 1.6.3: The changes below are included in this release: fixed an exception when collect a server's status but it has been stopped fixed a bug that can cause an exception in case of sending data when the connection dropped already fixed the log4net missing issue for a QuickStart project fixed a warning in a QuickStart projectYnote Classic: Ynote Classic 2.8.5 Beta: Several Changes - Multiple Carets and Multiple Selections - Improved Startup Time - Improved Syntax Highlighting - Search Improvements - Shell Command - Improved StabilityTEBookConverter: 1.2: Fixed: Could not start convertion in some cases Fixed: Progress show during convertion was truncated Fixed: Stopping convertion didn't reset program titleNew Projects.NET to C/C++ Interop Sample: Reference projects that demonstrate how to invoke C/C++ code from .NET using C#.Aircraft Guidance Systems: Software for RC model control and navigationDNN Upgrade Wizard: Provides a simple method for upgrading a DNN siteDrop and Create indexes SSIS Task: This is a simple SSIS Control Flow Task which can be used to drop and re-create all non-primary key indexes associated with specified table.Dynamics CRM 2013 Global Advanced Find: Dynamics CRM 2013 Global Advanced Find adds a button to the global navigation allowing users to launch an advanced find window from anywhere in the system.itsanewproject: sdlfjsldjfJNMSJW: hahaOmni Kits: A library tend to help in projects for any purpose while keeping small.Phase1Week1: Learning how to post, publish, and patch my commits to CodePlex with homework using bootsrap and font awesome.PL_Last1: Pll1Tabletoparmy: Tabletoparmy ist ein Tool um Tabletop Miniaturen zu Verwalten. Aktuell gibt es nur die Möglichkeit ein X-Wing Turnier zu verwalten.TalesAndTiles: Tile based game developed with Microsoft XNA Framework 4.0??????: ?????????

Read the article

Preventing Users From Accessing wp-admin

- by Gary Pendergast

If you have a WordPress site that you allow people to sign up for, you often don’t want them to be able to access wp-admin. It’s not that there are any security issues, you just want to ensure that your users are accessing your site in a predictable manner.To block non-admin users from getting into wp-admin, you just need to add the following code to your functions.php, or somewhere similar:add_action( 'init', 'blockusers_init' ); function blockusers_init() { if ( is_admin() && ! current_user_can( 'administrator' ) ) { wp_redirect( home_url() ); exit; } }Ta-da! Now, only administrator users can access wp-admin, everyone else will be re-directed to the homepage.

Read the article

Catch Me If You Can

- by Knut Vatsendvik

Suppose you have a Proxy based Web Service using Oracle Service Bus. In a stage in the request pipeline, you are using a Publish action to publish the incoming message to a JMS queue using a Business Service. What if the outbound transport provider throws an exception (outside of your pipeline)? Is your pipeline able to catch the error with an error handler?? This situation could occur because of a faulty connection, suspended queue, or some other reason. Here is the Request Pipeline in our simple test case. With an Error Handler added to the message flow containing a simple Log action. By default, the Publish action will invoke the service in a fire and forget fashion. Therefore any exception that occurs in the outbound transport will go unnoticed as shown in the following Invocation Trace. So what now? In a message flow, you can apply a Routing Options action to modify any or all of the following properties in the outbound request: URI, Quality of Service, Mode, Retry parameters, Message Priority. Now add the Routing Options action to the Request Action as shown below. Click the Routing Options to display its properties in the Properties View. Select the QoS option to set the Quality of Service element. Select Exactly Once to override the default setting, and Republish the project. The invocation will now block until the message is completely processed. Trying the same test case as earlier generates the following Invocation Trace showing that the Error Handler is now triggered.

Read the article

Questioning pythonic type checking

- by Pace

I've seen countless times the following approach suggested for "taking in a collection of objects and doing X if X is a Y and ignoring the object otherwise" def quackAllDucks(ducks): for duck in ducks: try: duck.quack("QUACK") except AttributeError: #Not a duck, can't quack, don't worry about it pass The alternative implementation below always gets flak for the performance hit caused by type checking def quackAllDucks(ducks): for duck in ducks: if hasattr(duck,"quack"): duck.quack("QUACK") However, it seems to me that in 99% of scenarios you would want to use the second solution because of the following: If the user gets the parameters wrong then they will not be treated like a duck and there will be no indication. A lot of time will be wasted debugging why there is no quacking going on until the user finally realizes his silly mistake. The second solution would throw a stack trace as soon the user tried to quack. If the user has any bugs in their quack() method which cause an AttributeError then those bugs will be silently swallowed. Once again time will be wasted digging for the bug when the second solution would simply give a stack trace showing the immediate issue. In fact, it seems to me that the only time you would ever want to use the first method is when: The block of code in question is in an extremely performance critical section of your application. Following the principal of "avoid premature optimization" you would only realize this of course, after you had implemented the safer approach and found it to be a bottleneck. There are many types of quacking objects out there and you are only interested in quacking objects that quack with a very specific set of arguments (this seems to be a very rare case to me). Given this, why is it that so many people prefer the first approach over the second approach? What is it that I am missing? Also, I realize there are other solutions (such as using abcs) but these are the two solutions I seem to see most often for the basic case.

Search Results

Search found 7511 results on 301 pages for 'synchronized block'.

Page 173/301 | < Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180 | Next Page >

- by Samuel

- by James Michael Hare

- by Tori Wieldt

- by Rohit Bansal

- by Merlyn Morgan-Graham

- by ProfK

- by Techlands

- by Mysticgeek

- by Graviton

- by ETC

- by Jeff Ferguson

- by Aaron Waller

- by ???????? ????? ???????????

- by oazabir

- by MarkPearl

- by Frank A

- by Douglas

- by Anicho

- by Stuart Brierley

- by Gary Pendergast

- by Knut Vatsendvik

- by Pace

< Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180 | Next Page >