Search Results

Search found 5541 results on 222 pages for 'the un t guy'.

Page 173/222 | < Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >

• Redhat 5.5: Multi-thread process only uses 1 CPU of the available 8

  - by Tonny

  Weird situation: Redhat Enterprise 5.5 (stock install, no updates, x64) on a HP z800 workstation. (Dual Xeon 2,2 Ghz. 8 cores, 16 if you count Hyper-threading. RH sees 16 cores.) We have an application that can utilize 1, 2 or 4 threads for heavy calculations. Somehow all these threads run on the same core at 100% load (the other 15 cores are nearly idle) so there is absolutely no benefit from the extra threads. In fact there is a slight slowdown as the threads get in each others way on the single core. How do I get them to run on separate cores (if possible)? Application is 64 bit. Can't change anything about the software except changing the threads setting. Is there some obscure Linux setting I can try to change? (I'm a True64 and Aix guy. I use Linux, but have no in depth knowledge of the process scheduling on Linux.)

  Read the article

• Distributed development staff needing a common IP range

  - by bakasan

  I work on a development staff that is geographically distributed, mostly all throughout the state of CA, but several key members also must travel frequently. We rely quite heavily on a 3rd party provider API for a great deal of our subsystems (can't get into who it is or what they do). The 3rd party however is quite stringent on network access and have no notion of a development sandbox. Access is restricted to 2, 3 IP numbers and that's about it. Once we account for our production servers, that leaves us with an IP or two to spare for our dev team--which is still problematic as people's home IP changes, people travel, we have more than 2 devs, etc. Wide IP blocks are not permitted by the 3rd party. Nor will they allow dynamic DNS type services. There is no simple console to swap IPs on the fly either (e.g. if a dev's IP at home changes or they are on the road). As none of us are deep network experts, I'm wondering what our viable options are? Are there such things as 3rd party hosts to VPNs? Generally I think of a VPN as a mechanism to gain access to a home office, but the notion would be a 3rd party VPN that we'd all connect to and we'd register this as an IP origin w/ our 3rd party. We've considered using Amazon EC2 to effectively host a dev environment for each dev and using that to connect. Amazon only gives you so many static IPs however (I believe 5?) so this would only be a stop gap solution until our team size out strips our IP count at Amazon. Those were the only viable thoughts that I had, but again, I'm far from a networking guy. Tried searching for similar threads, but I'm not even sure I know the right vernacular to look around for.

  Read the article

• WDS updating raid drivers in an already existing image WIM

  - by Tim

  Here is my current setup. WDS installed on Server 2008 R2 for the new driverstore and multicast features. A Windows Server 2003 32bit Standard image built to support previous DL360 models. A new HP DL360 G6 which has a new raid controller in it. I need to add the driver for the raid controller into my Server 2003 32bit standard install image but I can't seem to figure out the correct method to do so. So far I've tried the following: Mounting the image and placing the drivers into the Sysprep drivers folder, adding the PCI device codes into the sysprep.inf file and committing the changes to the image. Pushing the image to a DL360 G4, ensuring the driver is in the correct locations and re-sysprepping the image. Hoping that the new driverstore feature would magically work with 2003 (a guy can dream cant he?) Is there some standard method that I can use to update this image with the new drivers or do I need to start from scratch with an entirely new build? Thanks in advance.

  Read the article

• Perl - WWW::Mechanize Cookie Session Id is being reset with every get(), how to make it stop?

  - by Phill Pafford

  So I'm scraping a site that I have access to via HTTPS, I can login and start the process but each time I hit a new page (URL) the cookie Session Id changes. How do I keep the logged in Cookie Session Id? #!/usr/bin/perl -w use strict; use warnings; use WWW::Mechanize; use HTTP::Cookies; use LWP::Debug qw(+); use HTTP::Request; use LWP::UserAgent; use HTTP::Request::Common; my $un = 'username'; my $pw = 'password'; my $url = 'https://subdomain.url.com/index.do'; my $agent = WWW::Mechanize->new(cookie_jar => {}, autocheck => 0); $agent->{onerror}=\&WWW::Mechanize::_warn; $agent->agent('Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.3) Gecko/20100407 Ubuntu/9.10 (karmic) Firefox/3.6.3'); $agent->get($url); $agent->form_name('form'); $agent->field(username => $un); $agent->field(password => $pw); $agent->click("Log In"); print "After Login Cookie: "; print $agent->cookie_jar->as_string(); print "\n\n"; my $searchURL='https://subdomain.url.com/search.do'; $agent->get($searchURL); print "After Search Cookie: "; print $agent->cookie_jar->as_string(); print "\n"; The output: After Login Cookie: Set-Cookie3: JSESSIONID=367C6D; path="/thepath"; domain=subdomina.url.com; path_spec; secure; discard; version=0 After Search Cookie: Set-Cookie3: JSESSIONID=855402; path="/thepath"; domain=subdomain.com.com; path_spec; secure; discard; version=0 Also I think the site requires a CERT (Well in the browser it does), would this be the correct way to add it? $ENV{HTTPS_CERT_FILE} = 'SUBDOMAIN.URL.COM'; ## Insert this after the use HTTP::Request... Also for the CERT In using the first option in this list, is this correct? X.509 Certificate (PEM) X.509 Certificate with chain (PEM) X.509 Certificate (DER) X.509 Certificate (PKCS#7) X.509 Certificate with chain (PKCS#7)

  Read the article

• Need a VM for running a PHP Sandbox

  - by Phani

  I am working on Web application honeypot. It collects PHP files it receives (as part of an RFI attack) and runs them in order to return the result back to the attacker. The aim is to coax the bad guy into going further into his attack. Based on the answers to my SO question, I am looking at using VMs for running the PHP Sandbox. The honeypot itself consists of Python code and will be running in a Linux environment (preferably Ubuntu-like). These are some of the requirements: The VM should be a light weight as possible. We are going to distribute the code around and many people are going to use the VM along with the Python based honeypot. So, the installation and configuration should not be too difficult. The guest system would also be Linux as we are going to distribute the VM image around. It should be possible for the Python code outside to talk to the guest system. It would be passing on the PHP file to the guest system and will get the output result from it. It should be possible to automate the initial configuration of the VM (such as allocation of RAM etc.) I would like to randomize these settings in order to make the sandbox less 'fingerprintable' I have looked at OpenVZ and KVM so far. Are there any other VMs that I might look at? What do you recommend?

  Read the article

• Im getting the "Console Window Host has stopped working" popup in a few places.

  - by m1sk

  Im running Windows 7 on a 17 inch Macbook Pro, late 2011. Last Saturday I opened my laptop(It was either asleep or shutdown before hand) and suddenly had a whole bunch of problem. First off I got a few of pop-errors, my macbook was out of battery. I also had problems with my trackpad(no scrolling or right-click), which I fixed by reinstalling bootcamp. Now a days when ever I run cmd I get the popup Console Window Host has stopped working If I chose the Close the program I get another popup The application was unable to start correctly (0xc0000142) Click OK to close the application. This doesnt happen just with cmd if un/install a program I get similar popups(first one). And in some other case like in visual studio when i was working on class work.

  Read the article

• Routing multiple static IPs from ISP at the cable modem?

  - by Jakobud

  I'm taking over IT responsibilities for a previous IT guy. We have a 50mb cable modem connection from Comcast along with 5 static IP addresses: XXX.XXX.XXX.180 XXX.XXX.XXX.181 XXX.XXX.XXX.182 XXX.XXX.XXX.183 XXX.XXX.XXX.184 We are in the process of replacing our firewall machine. Currently the firewall box is the only thing connected to the cable modem. However the cable modem has multiple ethernet ports on it, similarly to a router. I have assembled a new firewall machine and its time to start testing and configuring it. So that means that I also need it plugged into the cable modem (remember it has multiple ethernet ports on it). So now with multiple computer plugged into the cable modem, how does the cable modem know where to route the traffic? If some request on the internet is made to XXX.XXX.XXX.181, which goes to our cable modem, how does the cable modem know which connected computer that traffic is supposed to be sent? Looking at the web interface for the cable modem, there doesn't seem to be anything special setup on it with regards to routing or NATing IP addresses. Is that because when there is only one computer connected to the modem, all traffic is sent to it by default? Now that I am going to (temporarily) have multiple computers plugged into the cable modem, do I need to specify routing or NAT rules on the modem itself? I am going to speak to Comcast about this next, but I figured I'd ask here first just so I can get a better grasp on how this type of thing generally plays out.

  Read the article

• Map a domain to another subdomain - Rackspace

  - by Gorgi Rankovski

  I am using a subdomain as a parameter to an ASP.NET MVC 4 application. It's working well. Now I need to test my approach, so I have the application hosted on appharbor. It works well with subdomains here too. Our DNS registers are on Rackspace, but I have no control over it. Another guy is responsible for that. So, myapp.apphb.com can be accessed through myapp.com. Also abc.myapp.com is working as expected. I use abc as a parameter. So, now I want abc.com to be mapped in those Rackspace DNS registers to abc.myapp.com Is this possible at all? Can you explain to us how to do that? Will I have some problems with it? Anything that I should be aware of? Please have in mind that I am newbie when it comes to DNS. And no experience with Rackspace. Thanks.

  Read the article

• 4.00gb (3.25gb usable) in Windows 7 x64

  - by dotnetdev

  Hi, I have setup Windows 7 Ultimate x64 on my PC. I have 4gb RAM and my BIOS states the correct amount (4096mb), but I cannot Windows (System Manager) says I have 4.00gb (3.25gb usable). This seems to be a popular issue, and I have looked for an integrated video card (integrated with my chipset) to disable but haven't found anything. What else can be preventing me from seeing all 4gb? When I had Vista 32bit, it would say 3.25gb RAM not 4.00gb (3.25gb usable). I have an x64 CPU and when I brought my RAM, I used a compatibility tool from Crucial (the memory vendor) to test how much memory my PC can support and 4gb was the answer (this was a windows app I think). Chipset is Intel(R) G33/G31/P35/P31 Express Chipset PCI Express In the bios, I looked for an onboard video card (integrated) and there was no such thing, but a couple of other onboard devices. There are also no "Resource Mappings" settings. FURHTER DETAILS: Chipset North Bridge: Intel Bearlake G33 South Bridge: Intel 82801IR ICH9R Maximum Memory Amount 8 GB Graphics Controller Type Intel GMA 3100 (Enabled) I guess the first thing is, how do I disable the graphics controller? EDIT: This thread (http://forums.legitreviews.com/about23417.html) indicates the issue is with memory mapped devices, but someone on this thread says that does not apply to x64. The rest of the comments points to a mobo issue for the guy who started that thread. Thanks

  Read the article

• HP Procurve Issue Passing Multiple VLANs over a link

  - by MichaelRwat

  Just to start off with I am a Cisco guy that got placed into an HP project. Basic topology overview from outside in: ASA 5505 with two Ethernet connections to a 2910-24 port switch. This switch is then (Cisco Trunking) to a 2626 switch passing vlan (1 untagged and 100 tagged)between them. I created SVI's on each of the switches for both VLAN's for testing purposes. I can not get vlan 100 to pass across this link. I also have trunks configured to AP's off of the switch and can not ping the vlan 100 BVI on the AP's but can reach the vlan 1 BVI. Port 25 on Access layer (2626) connects (trunks) with port A1 of 2610. STP is not running at all on any switch (this is not my network I can't change this nor did I design this) Distribution Sw: MP1-0# show run ip default-gateway 10.100.100.100 vlan 1 name "DATA" untagged 1-22,24-A1,B1 ip address 10.100.100.6 255.255.255.0 no untagged 23 exit vlan 100 name "GUEST" untagged 23 tagged 24-A1 ip address 10.100.102.6 255.255.255.0 exit Access Sw: ip default-gateway 10.100.100.100 vlan 1 name "DEFAULT_VLAN" untagged 1-26 ip address 10.100.100.5 255.255.255.0 exit vlan 100 name "GUEST" ip address 10.100.102.5 255.255.255.0 tagged 15,25 exitt From the ASA I can ping the vlan 100 address of the 2610 but not the 2626 (10.100.102.6)[Not passing the "trunk"] If I plug into an access port vlan 100 of the 2626 I can ping the SVI for vlan 100 as intended. I can not ping across the "trunk" over vlan 100 but I can across vlan 1. There may be something obvious I'm missing but please review my configuration and thank you for the assistance.

  Read the article

• Data Execution Prevention problem in Windows Server 2008

  - by naveen

  Hi guys, I am an ASP.NET developer, who has minimal knowledge in Server administration. I have a database hosted at Windows Server 2008. Today morning onwards it periodically stops working. The message given is something to the effect "The program is being shut down to prevent Data Execution Prevention error" Some other programs are also showing the behavior. I would like to know, what causes this all of a sudden? The server is UN-protected(IE: no anti-virus installed at all), could this be a possible anti-virus/ malware attack? What do we need to do to get the SOL running smoothly again? Regards, Naveen Jose

  Read the article

• Is this a common/bug on this PPPoE setting for Cisco ASA 5505?

  - by DCAlliances

  We have to change the way the firewall setup due to we've changed the internet provider. The way we setup we have ADSL modem and we have to do a full bridge mode and the firewall configuration has to change from Static IP to Use PPPoE option on Outside interface with PPPoE username and password, CHAP authentication, WAN IP and WAN subnet mask. [See the attachment] It's been working ok with the use of PPPoE option however the issue is that if we un-plug the power cable of the firewall. This "Outside" interface turned to blank - NO WAN IP, PPPoE username and password. So basically, we have to retype this information again. Is this common or a bug? Any ideas? Thanks

  Read the article

• Best approach to utilize RamDisk for Chrome?

  - by laggingreflex

  I use a lot of tabs and after a while less recently opened tabs take some time to become responsive, which I guess is because they're being un-cached to HDD as they're not required. So after creating a Ram-Disk I have two options, use --disk-cache-dir="G:/" switch to do what it does. Or what I'm currently doing: using a directory junction for "[...]\AppData\Local\Google\Chrome\User Data\Default" to move that entire folder over to Ram-Disk. I thought this would be better than just disk-cache but what do I know. Is it? As one can guess it'll be a pain saving/loading the Ram-Disk image each time I start chrome but if it really is better than the former approach I'll write a script or something.

  Read the article

• Windows 2003 Active Directory Integrated DNS zone not registering non-domain computers

  - by Jeff Willener

  I'm not a networking guy by all means, I'm just a developer who dabbles enough to get into trouble and I'm there. So bear with me... :) At my office I have a Windows 2003 Domain Controller which also services DNS. On the domain I have a handful of computers and other misc. equipment/toys. For the DNS I only created a Forward Lookup Zone for my domain (mydomain.com). I run a lot of VM's so generally I have everything on the domain, however some of those VM's are not and only in a 'Workgroup'. I also have another laptop which belongs to another domain (otherdomain.com) which is here 100% but I use it for other purposes and has to belong to the otherdomain.com. With all that said, I have two questions: I have found any computer not on mydomain.com does not register it's IP address even though 'Register this connections address in DNS' is set to in the 'Advanced TCP/IP Settings' for the nic. Where have I messed this up? On the laptop which is registered on otherdomain.com, when I do a nslookup for a computer on mydomain.com (e.g. nslookup devbox1) it appends otherdomain.com as the suffix (e.g. queries devbox1.otherdomain.com). Same thing occurs if I use the fully qualified name. In the 'Advanced TCP/IP Settings' for that nic, I can 'Append these DNS suffixes' of mydomain.com but I fear that will hose my DNS lookups when I VPN to otherdomain.com. So what is the correct approach to resolve this issue? Do I add both mydomain.com and otherdomain.com in that order?

  Read the article

• prevent domain controller using wpad for windows update

  - by BeowulfNode42

  We have a 2012 domain controller in an environment where we are running a web proxy auto discovery (WPAD) setup for client devices, and that proxy server requires authentication. However windows update does not support proxy servers requiring authentication. So we want to prevent windows update on our servers from using the WPAD proxy settings. On a domain member server we can log in to the local administrator account (not domain admin) and un-tick the the "Auto detect proxy settings" in IE internet options and that fixes the issue on those servers. But a domain controller does not have a local admin account, as that account is the domain admin account. Doing this to the domain admin account on the DC does not prevent it from using WPAD. Our whole purpose of running a proxy server that requires authentication is so we can identify what the users on our session based remote desktop servers are doing on the internet. See this MS KB Article for some info about Windows update and proxy servers "How the Windows Update client determines which proxy server to use to connect to the Windows Update Web site" - http://support.microsoft.com/kb/900935

  Read the article

• MySQL blocking new connections, and mysqladmin flush-hosts

  - by aidan

  I'm running MySQL on a remote server, and it suddenly started rejecting all connections: $ mysql -h 192.168.1.10 -u root -p ERROR 1129 (00000): Host 'web' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts' So, I try this flush-hosts command... $ mysqladmin flush-hosts -h 192.168.1.10 -u root -p mysqladmin: connect to server at '192.168.1.10' failed error: 'Host 'web' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts'' I.e. it's blocking the very un-blocking tool it recommends. Am I doing it wrong, or will I have to resort to ssh/cpanel/physical access?

  Read the article

• MySQL replication hung after slave goes offline and comes back online again

  - by Ed Manet

  I have a master server and several slave servers replicating a single database. I am using in MySQL 5.0 in SLES 11. During fault tolerance testing I found that when the slave's network connection is broken (cable un-plugged) and then restored, replication hangs. It shows no errors and the slave appears to be running but the Read_Master_Log_Pos and Exec_Master_Log_Pos values do not match the log postion on the master server. The Slave_IO_State is "Waiting for master to send event". The Slave_IO_Running and Slave_SQL_Running values are both are "Yes". The Master_Log_File and Relay_Master_Log_File match. If I stop and start the slave or restart the mysql daemon, replication starts working again. Any ideas on what I can do about this?

  Read the article

• OS/X 10.6 Bizarre login bug: Making alternative "Others..." appear. Why does this happen?

  - by bjornl

  I am studying at NUS in Singapore, and they have a mac-equipped computer lab here at school. All users (students) have our own personal accounts that we use to log in to the computers with. Sometimes when you approach a computer to log in only the alternative "thinkmac", which is the school's administrator account, I presume. Some other computers have the alternative "thinkmac" as well as "Others..." where you can input your own login credentials. One day as I sat down by a computer and there was only the "thinkmac" alternative. I was about to get up and find another one when the guy sitting next to me says - Just click 'thinkmac' - the computer will ask for your password - then hit escape to get back to the login screen. Repeat until "Others..." appear. So: If you click any user account, hit ESC to get taken back to the login screen, repeat for 5-10x, eventually the alternative "Others..." will appear. Why is this? Is there an internal counter that keeps track on how many times you have clicked a/any given user account, and after a certain threshold it displays the "Others"? What is the logical reasoning behind this?

  Read the article

• What program should I use for SSL stripping and re-encrypting

  - by Sparksis

  I'm trying to strip a HTTP over SSL connection down to SSL and then re-encrypt the channel (with a signed certificate(s) I can provide). Of course I want to be able to store captures of all the un-encrypted data. The purpose of this is to reverse engineer a HTTP handshake that is used by a SIP program on my machine. I've tried SSLstrip but it doesn't support what I need it too. Edit: I want something to this effect https://github.com/applidium/Cracking-Siri/blob/master/tcpProxy.rb only more generic and able to write to a pcap stream that wireshark will understand (I'm not sure if this does that). Edit2: upon further inspection this does not create pcap streams. I guess if need be I can write a compatible version but that is not the desired choice.

  Read the article

• Problem configuring php-fpm with nginx

  - by Nisanio

  First of all: I'm not an expert in configuring things. This is very new for me, so, my apologies in advance. At work we have a Centos server. The guy who worked here before installed nginx. We need to made a php site, so, obviously, I need to set up php and make it work with nginx. Making short a very long tale, I had to replace the nginx binary with a new one (because the older was compile without fast-cgi), and I had to recompile and install php (because the new version has fpm). Then I struggle with the config files, making this nginx.conf (not all the file) user php; location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name; include fastcgi_params; } and uncomment some parameters in php-fpm (to much to detail here, but the important is that group and user are "php") I never could start the php-fpm with the instructions of the book sudo /usr/sbin/php-fpm start But after look at the net, I found this sudo /usr/local/sbin/php-fpm --fpm-config=/usr/local/etc/php-fpm.conf This worked (I think) I restarted nginx. But... nothings happens with php... My calls to php files (via firefox) doesn't even appear in the log (/opt/nginx/logs/error.log) I'm really, really exhausted and lost... Could anyone help me, pleaaase.... :( Thanks in advance

  Read the article

• Installing Windows Mobile SDK without Visual Studio

  - by Tester101

  Is it possible to install the Windows Mobile SDK without having Visual Studio? I am using SharpDevelop to write a Windows Mobile application, but I need to use an assembly in the Windows Mobile 6.0 SDK. When I try to install the SDK I get a message that says Visual Studio is a prerequisite, and I am un able to install it. Is there a way to trick it in to thinking Visual Studio is installed; maybe a registry entry that can be added or something, or am I just hosed? Is there a reason I need to pay for Microsoft's IDE, or is this just a way for Microsoft to make some extra money? Thanks,

  Read the article

• Acer Aspire one is falling apart on Ubuntu

  - by Narcolapser

  Question: How do I have my netbook detect and install hardware? Info: I have an Acer Aspire One, it came with windows XP and I loaded it with Win7. I decided I wanted to change to Ubuntu so I tried Ubuntu netbook remix, which failed horribly, and so after attempting 3 or so other OS's I ended with Ubuntu Desktop 9.10. Which worked fine for a while, but there were some minor issues so I asked a question about it here and decided to change my OS again. This last weekend I tried mandriva like that guy in my other question suggested, no success. when I had though my netbook lost the ability to use it's touch pad, I didn't think much of it, just thought it must be a driver or something. But When Mandriva failed, and I also while I was at it tried Damn small linux and Debian, which both failed to, I decided to switch back to Ubuntu Desktop(some where in here my keyboard stopped working for one attempt to). But first I gave the netbook remix one more try. it worked this time, with the exception of it didn't have any networking. I thought it was a driver issue again and finished the weekend with ubuntu desktop 9.10 again. But now things get really crazy. it doesn't know it has a wireless card or an ethernet card. It doesn't know my phone is connected trying to provide wireless broadband either. I'm clueless on what could be the problem. And with only a minimal amount of experience with Ubuntu can't navigate the entire interface with only my keyboard(it doesn't detect a USB mouse when I plug it in, it had when I installed it. in fact the network interfaces were working just fine when I live boot ubuntu to installed it). Even so, I don't know where to go or what to do to make it recognize it's hardware. I'm in a dire situation, any help is welcome.

  Read the article

• How to configure TFTPD32 to ignore non PXE DHCP requests?

  - by Ingmar Hupp

  I want to give our Windows guy a way of easily PXE booting machines for deployment by plugging his laptop into one of our site networks. I've set up a TFTPD32 configuration which does just that, and our normal DHCP server ignores the PXE DHCP requests due to them having some magic flag, so this part works as desired. However I'm not sure how to configure TFTPD32 to only respond to PXE DHCP requests (the ones with the magic flag) and ignore all normal DHCP requests (so that the production machines don't get a non-routed address from the PXE server). How do I configured TFTPD32 to ignore these non-PXE DHCP requests? Or if it can't, is there another equally easy to use piece of software that he can run on his Windows laptop? Since the TFTPD part is working fine, a DHCP server with the ability to serve PXE only would do. Worst case I'll have to set up a virtual machine with all this, but I'd much prefer a small, simple solution. I'm not interested in solutions that involve using the existing DHCP servers or separating machines on the network for deployment, the whole point is to be simple and stand-alone.

  Read the article

• Fsck stuck on "Clone Multiply-claimed blocks"

  - by user3436581

  Update: I fixed the issue. But I don't see eth0 directory in /sys/class/net Any idea how to fix that? I could not bring up eth0 and I need it badly so that I can backup everything over the network since I'm working on VM console. This virtual machine sda1 is stuck. I've tried e2fsck and fsck and both gets stuck after "Clone multiply-claimed blocls? yes" I've waited for around 5 to 8 hours and it still the same. I could not mount the filesystem without fixing these errors. I'm doing this after un-mounting all filesystems in rescue mode.. Reboot does not help. Any suggestions? Screenshot: http://i.stack.imgur.com/lgixr.jpg Alternative screenshot url: http://s27.postimg.org/grk4p9eeb/error.png

  Read the article

• Paypal Express Checkout api credentials - How to store them properly?

  - by Sequence

  I've been searching the internet and I've come up with a lot of answers of how to store paypal API credentials(Used in Paypal Express Checkout.) They say to hash the credentials using salt. But what I don't understand is how and where to store the salt. If they get access to the salt, can't they just un-hash the credentials? That doesn't seem very secure to me. They say not to hard-code the API credentials, but any other way still seems really vulnerable. Thanks for taking the time to look at my questions. I'd really appreciate help.

  Read the article

< Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >