Search Results

Search found 41338 results on 1654 pages for 'used'.

Page 173/1654 | < Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >

• How to use Ralink RT2501/RT2573 as wifi access point in Debian Linux

  - by user60813

  Hi, I have a fit-PC server with Debian GNU/Linux (Lenny). I would like to use it as a wifi access point since my Linksys WRT54GS has become unstable. I have a USB Ralink wifi NIC. When I insert the card to USB I can see this with lsusb: Bus 001 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter I have tried following various HOWTOs on using wifi card as AP in Linux, however, it seems that the card cannot go into monitor mode. I believe this is because I must use a newer driver or upload non-free firmware or something like that. I have tried installed wicd, but it does not help. I bought this wifi adapter because I was told that it is one of the most common used Linux supported wifi cards that can be used as access point and a lot of other stuff. So my question is: How do I set up this USB wifi card as wireless access point in Debian Lenny?

  Read the article

• Is there a way to add a custom favicon to an App Tab?

  - by Iszi

  Since the release of Firefox "5", I've come to really love the new "App Tabs" feature. However, I've now realized that several internal websites at work do not have favicons. So, when I make an App Tab out of these sites, there's only a "blank page" icon in the tab. Perhaps I wouldn't mind so much if there was only one, but there's at least two or three of these. So, it's just a bit annoying to have to mouse-over the App Tabs to figure out which is what. I've tried using Favicon Picker 2 to change the bookmark icons, but it only does exactly that - changes the icon in the bookmarks folder. It doesn't change the favicon that's displayed next to the URL in the Address Bar, or the one next to the page title in tabs - the latter being that which is used for the App Tab icon. So, is there a plugin or other client-side (and preferably "Joe User" friendly) method to assign an icon to a web page or domain, that will be used in the tab bar?

  Read the article

• Terminal command to send data (plain text string) to a port at a remote computer.

  - by Eddy

  I am trying to send data (plain text string) to a port at a remote computer using terminal utility. The string would be used to trigger something on the remote computer running a program that would listen to that specific port. I used netcat command and tried a few combination of the following but can't seem to get the parameter right. Can someone point me out where am I doing wrong? eddy-2:Desktop eddy$ nc IPADDRESS PORT woc.txt eddy-2:Desktop eddy$ nc IPADDRESS PORT < woc.txt P.S: woc.txt contains plain text string of the said command. Edit: I am trying to send a string from OSX to Windows XP where the specific port is open by default.

  Read the article

• How to refresh open source software pkg manager on oldish OpenSolaris?

  - by Luke404

  I'm being presented with an OpenSolaris vps, actually a Solaris Container, which is based on SXCE snv_121 and is active since mid 2007: the good old Sun days, IIRC even before the Indiana stuff! For various reasons the system itself can't be rebuilt/upgraded but we can do whatever we want with the additional package manager on it. My Solaris skills and especially knowledge of the free package managers ecosystem is a bit rusty so I don't know what I can actually use while keeping the somewhat oldish base system. Currently there is pkg-get using some older Blastwave mirror, it has been used to install things such as Apache2, PHP, Python, Nagios. I would like to remove all the old rusty stuff and all of Blastwave, and start fresh with some newer package distribution. Can the current Blastwave system be used on that snv_121? Is there any better alternative still compatible with that system (eg. OpenCSW or anything else) ?

  Read the article

• How can I dual install Ubuntu 10.4 in a Mac Mini with 10.4.11?

  - by Marco Mariani

  I'd like to power-up my aging Mac Mini (1.5GHz Core Solo, 1GB RAM, Tiger 10.4.11) by installing a shiny Ubuntu alongside the current OS. After all, I use Ubuntu for everything save for cleaning my teeth. Since it's my first and only Mac and I have next to no experience with the OS (having used it basically as a media player) I am a little concerned about rEFIt, ELILO, Boot Camp and the fact that it's basically a 4.5 years old unsupported machine and I might get asleep reinstalling everything several times. I've used the live desktop-i386 CD and everything works. I tried with an external USB drive instead of a CD but couldn't make it boot. As for installing Ubuntu, the howtos I've found give several alternatives depending on the model, the OSX version, etc.. but they usually talk about newer machines. Which howto should I follow to repartition, and boot thereafter? Thanks

  Read the article

• Wiimote accelerometer input on Windows? (in 2013 - Glovepie alternative?)

  - by user568458

  There were a few options for getting accelerometer input into Windows using a Nintendo Wiimote. As of mid 2013, these projects seem to be dead, corrupted with malware, or both. Are there any tools out there that can do this that are still available (and not full of malware)? Quick roundup of the options that used to exist, or that still exist but aren't suitable: Glovepie, which used to be the most recommended option, appears to be dead: it's own website hacked, its creator's googlepages page full of strange stuff that sounds like hacker-humour about the end of the world... (I'd rather not link to them, very dubious stuff...), and lots of forum threads asking if it's a dead project with comments along the lines of "I heard that the author intends to return to it" dated 2011... Wiiuse seems to be dead: its sourceforge page simply says "Error.", its own website has turned into a squatter page. There apparently was an extension for Autohotkey that allowed Wiimote input, but I've seen warnings that this too is now full of malware (see final commentin above link) Everything else I can find about using Wiimotes as input on Windows - for example, Johnny Lee Cheng's work - seems to be exclusively about using infrared or sensor bar, or tied to a specific purpose (e.g. FPS gaming). My main interest is in the accelerometer, and buttons if possible (although something that supports the IR stuff too would be ideal). Is there anything that works for getting Wiimote accelerometer input into Windows that is reliable and not a malware-fest? If anyone's interested in "Why?", it's to use the Wiimote as an audio / midi controller: to use movement, pitch, roll etc to modulate lots of different sound variables at once with one hand. Wiimotes are great for this, and Glovepie used to be the standard way to make this work (e.g. see for example this tutorial, and this one, ignore the unrelated video; I've also seen musicians using wiimote/glovepie setups at gigs, creating some really unique sounds). As of 2013, however, Glovepie seems to be a dead and thoroughly hacked project, sadly. Is there anything else? With or without MotionPlus is fine (with would be better). If anyone knows of any worthy alternatives to Wiimotes in terms of price and quality that can be made to work with a PC, that would also be great: but in my research I coulnd't find any (here's a link to someone reaching the same conclusion). found some potentially relevant stuff here, not had time to test any of it yet though - http://stackoverflow.com/questions/2984450/using-accelerometer-in-wiimote-for-physics-practicals

  Read the article

• How do I use long names to refer to Group Managed Service Accounts (gMSA)?

  - by Jason Stangroome

  Commonly domain user accounts are used as service accounts. With domain user accounts, the username can easily be as long as 64 characters as long as the User Principal Name (UPN) is used to refer to the account, eg [email protected]. If you still use the legacy pre-Windows 2000 names (SAM) you have to truncate it to ~20 characters, eg mydomain\truncname. When using the New-ADServiceAccount PowerShell cmdlet to create a new Group Managed Service Account (gMSA) and a name longer than 15 characters is specified, an error is returned. To specify a longer name, the SAM name must be specified separately, eg: New-ADServiceAccount -Name longname -SamAccountName truncname ... To configure a service to run as the new gMSA, I can use the legacy username format mydomain\truncname$ but using usernames with a maximum of 15 characters in 2013 is a smell. How do I refer to a gMSA using the UPN-style format instead? I tried the longname$@domainfqdn approach but that didn't work. It also seems that the gMSA object in AD doesn't have a userPrincipalName attribute value specified.

  Read the article

• Can I use dmraid instead of md (mdadm) to make software RAID-1 and RAID-1+0 volumes?

  - by Don MacAskill

  On a related question about SSDs and TRIM (see: Possible to get SSD TRIM (discard) working on ext4 + LVM + software RAID in Linux? ), it turns out that dmraid may now (or shortly) support TRIM on RAID-1. Typically, we've used md (via mdadm) to create our RAID-1 volumes, then used LVM to create volume groups, then formatted with the file system of our choice (ext4 lately). We've been doing this for years, and Google & ServerFault searches seem to confirm this is the most common way of doing software RAID with volume management. Google searches seem to suggest that dmraid is use for so-called 'fakeRAID' configurations where there's some level of hardware 'help' in the form of RAID BIOS in the controller, which we don't have (and don't want to use - we'd like a fully software solution). Since we'd like to use TRIM on our SSDs, and since md doesn't seem to (yet?) support TRIM, I'm wondering if it's possible to use dmraid instead of md to create RAID-1 (and RAID-1+0) volumes in software, with no hardware support (ie, just plugged into a dumb SATA/SAS bus)?

  Read the article

• IIS: redirect everything to another URL, except for one Directory

  - by DrStalker

  I have an IIS server (IIS 6, Win 2003) that hosts the site http://www.foo.com. I want any request to http://foo.com (no matter what path/filename is used) to redirect to http://www.bar.org/AwesomePage.html UNLESS the request is for http://www.foo.com/specialdir, in which case the HTML files in the local directory specialdir should be used. The problem I have is once the redirect is set it also affects /specialdir - even if I right click on that directory and select "content should come from ... local directory" that change does not take effect, and the directory still shows as redirecting to http://www.bar.org/AwesomePage.html. The same thing happens if I try to set individual files to load from the local system instead of redirecting - IIS gives no error, but the change does not take effect and the files still show as being redirected. How can I set specialdir to override the redirection to the new URL?

  Read the article

• MPEG2-TS streaming: UDP or RTP?

  - by Juan Jose Polanco Arias

  Hello I'm working on an IPTV streaming server in Linux (Ubuntu Server 12.04 LTS) that has a DVB-S/S2 card to obtain satellite channels. Then with MuMuDVB I map all channels in the transponder to a multicast group, for multicast transmission. Now for the MuMuDVB software I can either use UDP for transmission or I can add the RTP header. I was wondering what would be the most convenient for MPEG2-TS because I've heard that RTP is used primarily for MPEG4, but It's also said that RTP can be used for MPEG2-TS. Thanks for your help.

  Read the article

• Cannot import video from a DV camcorder over FireWire

  - by qbeuek

  I have a JVC GR-D320 miniDV camcorder that has a FireWire interface. I recently upgraded to Windows 7 RTM (64 bit, fresh installation). When I connect my camcorder through FireWire, I can see it in Device Manager without any warnings or problems, but I cannot capture videos from my miniDV tapes. After connecting, AutoPlay displays "Import Video could not find a compatible digital video device. Verify that the digital video device is properly connected and turned on." When using Windows Live Photo Gallery after selecting the import option, my camera is not listed. The camera used to work perfectly on the same hardware before upgrading to Windows 7 RTM 64 bit (it used to work fine on Windows XP SP3 32 bit). Googleing revealed that people had the exact same problems in Vista, but no solution was provided. Any help?

  Read the article

• Tomcat memory usage grows until crash with no GC run

  - by Phil

  I'm administrating a server running Tomcat that is getting a lot of traffic lately. If I monitor memory usage in Task Manager I can see the memory usage growing and eventually tomcat crashes around the 1GB mark. Here's the memory relevent bits I've set in Tomcat Properties (this is a Windows Server): Intial memory pool: 1024 MB Maximum memory pool: 1024 MB -XX:MaxPermSize=256M The weird thing is since these problems arose I've deployed Lambda Probe to the Tomcat instance and the memory usage values I see there are much lower, for example Task Manager might show 467MB used while the "Total" used in Probe is 212 MB. Also, the Maximum Total listed in Probe is 1.29GB, when I would have expected 1GB, the maximum memory set above. If I force the garbage collector to run using Probe, I can keep Tomcat from crashing for a while (indefinitely, AFAIK). So why doesn't the GC run automatically and stop Tomcat from crashing? Thanks.

  Read the article

• How to configure Windows 2008 R2 server for LAN and wireless internet connections

  - by Alchemical

  For special testing purposes, we need a Windows server to allow the following: A team member can log in remotely to the server. When remotely logged in, they can disconnect the wireless connection, perform a few tests, and then reconnect the wireless connection. In general, the LAN connection would just be used for the remote login, the wireless connection would be used for performing tests including using a web browser to test certain web sites, etc. How can we successfully configure the server to support 2 network connections like this? (A regular LAN connection + a wireless connection). And also make sure that the tests we perform using the browser utilize the wireless connection for the outgoing internet activity.

  Read the article

• setting up delegate or smtp forwarding

  - by cotiso

  for work we have a remote dedicated server to run our webservice that also runs our email services, at home(comcast residential internet) i cannot send mail using the dedicated server's SMTP, comcast spits back a error saying i can only use their SMTP server for sending mail at work(comcast business internet) we can use our dedicated server for sending mail with no problem so i set up a box at work to forward smtp traffic, i'm new to all this networking stuff by the way i used delegate to forward smtp traffic, can someone point me in the right direction on how to use this program(delegate) to fix our issue the delegate command i used to test is : delegated -P25 SERVER="smtp://dedicated.server.com:25" PERMIT=":::" -v i also opened up port 25 on the router so it points to my boxes ip are there any other ways to fool comcast into thinking im using my works ip to send mail, my coworkers and i are unable to send mail from home for some time now thanks

  Read the article

• Calculate minimum ext3 partition size for certain amount of data

  - by Daniel Beck

  These following ext3 partitions contain identical data. As we can see, the larger the partition size, the more space is required for the same files: Filesystem 1K-blocks Used Available Use% Mounted on /dev/loop11 3965777 561064 3199964 15% [...] /dev/loop19 573029 543843 29186 95% [...] Filesystem Size Used Avail Use% Mounted on /dev/loop11 3.8G 548M 3.1G 15% [...] /dev/loop19 560M 532M 29M 95% [...] Filesystem Inodes IUsed IFree IUse% Mounted on /dev/loop11 1024000 1656 1022344 1% [...] /dev/loop19 1024000 1656 1022344 1% [...] I start with a partition of fixed size that possibly wasted a lot of space and I want to create a partition that is able to hold that data but with (almost) minimal size. How can I reliably calculate that minimal partition size needed for storing a certain amount of data? The amount of data changes over time, and I need to automate these calculations.

  Read the article

• Cloning a USB flash drive to another larger one, is it safe to do so?

  - by Rob Kam

  I used Acronis True Image Home 2010 to clone a Dane-Elec zLight 8Gb pen drive/USB flash drive to a PNY Attaché 16Gb USB flash drive. Now WinXP shows the drive in device manager as USB DISK 2.0 USB DEVICE but doesn't have it in My Computer/doesn't assign it a drive letter. What is it that has messed up the PNY Attaché and is there some way to repair it so that it can be used as a regular USB flash drive again? Is there a safe way to clone a USB flash drive to another larger one? How safe is it to backup and restore a USB flash drive to/from a drive-image?

  Read the article

• Add 802.11n to existing 802.11g environment

  - by Andrew Robinson

  I have a small home network that is currently running 802.11g. Two computers that are capable of 802.11n and two devices (a BlackBerry and a Skype phone) that are limited to 802.11g. I have a few neighbors running 802.11g but their signals are very weak. How big an impact will the two G devices have on N speeds? Will they pull the whole network back down to G? These two devices are hardly ever used where as the other N devices are heavily used. If I add an N router to the network (instead of replacing the G) and set my existing G router to use channel 1 with 20MHz bandwidth and then set the N router to use 6 & 11 for 40MHz will I eliminate the overlap and allow for full speed on both networks?

  Read the article

• Is computer's DRAM size not as important once we get a Solid State Drive?

  - by Jian Lin

  I am thinking of getting a Dell X11 netbook, and it can go up to 8GB of DRAM, together with a 256GB Solid State Drive. So in that case, it can handle quite a bit of Virtual PC running Linux, and Win XP, etc. But is the 8GB of RAM not so important any more. Won't 2GB or 4GB be quite good if a Solid State Hard drive is used? I think the most worried thing is that the memory is not enough and the less often used data is swapped to the pagefile on hard disk and it will become really slow, but with SDD drive, the problem is a lot less of a concerned? Is there a comparison as to, if DRAM speed is n, then SDD drive speed is how many n and hard disk speed is how many n just as a ball park comparison?

  Read the article

• Computer experiencing slowdowns and lockups despite low cpu useage

  - by user157145

  my setup i5-2300 nvidia gtx 550 ti 6 gigs ram 600 w ocz modular psu recently reformatted and already experiencing drastic slowdown as soon as windows comes up, including repeated lockups with multiple various programs reporting that they are not responsive, then recovering after 10-30 seconds. ive checked memory and hard drive both of which come out fine. despite my plethura of worthless antiviral software im forced to assume that my illicit downloading practices have lead me into some comp trouble that i cant seem to determine. i have used ccleaner, search and destroy and malware bytes, all of which have found nothing to indicate what is causing this massive slowdown. in addition according to my resource manager my computer is operating at a load of only 30-50 percent CPU useage and 60 ram useage but taking 5-10 seconds to load files and open folders, and repeated lockups of multiple programs, especially firefox which seems to go unresponsive every 2-3 minutes. any help would be appreciated, i used a program called OTL by old timer, but cant make any sense of the results i was given. any help or suggestions would be appreciated, thank you for taking the time to read this i have avast but it didnt even find anything when i had it do a full system scan, so im thinking its clueless(also nortons, avg, and ad-aware). i also have mse but it has yet to complete a full scan it takes so long (i left it on last night but when i woke up my computer had a problem and had to restart). my hard drive has 300 gigs out of 1tb open and i already used hd tune pro, which said my harddrive was fine and its not a ssd. also im a noob at comps and only have the hd that is currently inside the computer in addition im not sure if studdering is the issue im suffering. my problem is that during my typing of these responses firefox has gone "not responsive" at least 5 times, each for times of about 5-10 seconds. when i try to control alt delete to bring up windows task manager it took 20 seconds. essentially its that my computer goes super slow at bringing up anything, or taking any action whatsoever that opens a program or file and has repeated incidents where i cant even click on whatever im trying to do because it locks up. the confusing thing about these incidents is that its right after restarting where there are minimal programs running and the computer and memory load is light.

  Read the article

• Issue with Exchange 2010 and Removing a Mailbox Database

  - by ThaKidd

  I did a 2003 to 2010 transition and everything is working well. During the 2010 install, a database was copied over with a random number at the end. I found out and moved three system mailboxes out of it into the database that all of the client accounts are in. I used the EMS to move those mailboxes to the other store then used the EMC to remove the mailbox database. Problem is, I am getting an error every few hours in event viewer now complaining about this database. Error is: MSExchageRepl - 4098 The Microsoft Exchange Replication service couldn't find a valid configuration for database '5f012f40-3bad-4003-a373-dbc0ffb6736f' on server 'SERVER'. Error: (nothing reported after this) Does anyone know how to fix this issue? In advance, I appreciate your help and thx for your valuable input!

  Read the article

• How to securely delete files stored on a SSD?

  - by Chris Neuroth

  From a (very long, but definitely worth to read) article on SSDs: When you delete a file in your OS, there is no reaction from either a hard drive or SSD. It isn’t until you overwrite the sector (on a hard drive) or page (on a SSD) that you actually lose the data. File recovery programs use this property to their advantage and that’s how they help you recover deleted files. The key distinction between HDDs and SSDs however is what happens when you overwrite a file. While a HDD can simply write the new data to the same sector, a SSD will allocate a new (or previously used) page for the overwritten data. The page that contains the now invalid data will simply be marked as invalid and at some point it’ll get erased. So, what would be the best way to securely erase files stored on a SSD? Overwriting with random data as we are used to from hard disks (e.g. using the "shred" utility) won't work unless you overwrite the WHOLE drive...

  Read the article

• Different display arrangements for two identical displays

  - by Niels

  I have a MacBook Pro running OSX Lion and two workplaces with identical setups: at both places I have an 27" LED Cinema display. At one workplace my MacBook is on the left side of the external display, and at the other workplace it is on the right. I would like to have two different display arrangements for the two different setups, however, when I change the display arrangements in System Preferences when connected to one display, the arrangement is changed for the other display as well. I used to have a 27" and a 24" Cinema Display, and OSX used to remember the display arrangements for those different displays, but now the displays are identical, so they use the same arrangements setting. Is there any way to tell OSX to handle two identical displays as different ones so I can configure two different arrangements for the two setups?

  Read the article

• Java Framework Choice Question.

  - by Sarang

  We do have many frameworks available in Java. Struts, Swing, JSF 2.0, Spring etc are used as per their priority. Actually, I don't know how many they are as well! But, as I am fresher to Java, even learning after their architecture, I cannot decide which framework can be used with what type of Projects ! Also, I am confused with mixed use of framework like Spring + JSF. What is the benefit to it ? Another thing making me confusing is about the UI components available in market. Like, we do have Primefaces, Ice-faces, MyFaces, Rich-faces. They may or may not have been supporting AJAX in-built. They may contains some bugs as well. What is best choice for Framework + UI component that can directly provide a best feet solution for any project ?

  Read the article

• Firefox: howto open hxxp or other obscured links automatically

  - by fyodor78

  howto open hxxp or other obscured links automatically with Firefox (without copy and paste manually)?. For non obscured links I use Linky Firefox add-on From Wikipedia hxxp://, sometimes h**p:// or _ttp://, is used in URLs (web links) to obscure the fact that one is linking to a http:// website. It is generally used to avoid automatic recognition by computer programs. For a user to follow this link, it is usually necessary to manually copy-paste the link onto the web browser's address bar and replace the 'x'es with 't's. screenshot I use RefControl, so security is not an issue.

  Read the article

• Multiple client connecting to master MySQL over SSL

  - by Bastien974

  I successfully configured a MySQL replication over SSL between 2 servers accross the internet. Now I want a second server in the same location as the replication slave, to open a connection to the master db over ssl. I used the same command found here http://dev.mysql.com/doc/refman/5.1/en/secure-create-certs.html to generate a new set of client-cert.pem and client-key.pem with the same master db ca-cert/key.pem and I also used a different Common Name. When I try to initiate a connection between this new server and the master db, it fails : mysql -hmasterdb -utestssl -p --ssl-ca=/var/lib/mysql/newcerts/ca-cert.pem --ssl-cert=/var/lib/mysql/newcerts/client-cert.pem --ssl-key=/var/lib/mysql/newcerts/client-key.pem ERROR 2026 (HY000): SSL connection error It's working without SSL.

  Read the article

< Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >