Search Results

Search found 5572 results on 223 pages for 'cpu'.

Page 174/223 | < Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >

• New computer hangs on shutdown/reboot, how to troubleshoot?

  - by torbengb

  Summary: My machine hangs on shutdown/restart: all windows and the menu bar disappear but the desktop wallpaper remains, and it stays like that without disk activity forever (hours). It doesn't even show the shutdown screen (the one with the animated dots) where I could hit ESC and watch the shutdown text. How can I troubleshoot this? Details: I've just received a new nettop computer (Acer Aspire Revo 3700: CPU:Atom D525, GPU:Nvidia ION2). I've just made a clean install of Ubuntu 10.10 using the standard USB pendrive method. The machine boots okay and works OK including WLAN and audio, but the graphics are not OK. Ubuntu offered to install&activate the current recommended Nvidia driver, but the machine hangs on shutdown/restart which prevents the installation of the proper Nvidia driver. I have to cycle the power to reboot. I ran the Update Manager in the hope that the updates would fix the hang-up. At the end of the update-installation it asked to reboot - and got stuck just like before. I see no obvious cause of the freeze and I don't know if it's caused by graphics problems or anything else. The only USB attachment is a mouse/keyboard; I don't have any external storage attached; and I don't have any programs running (the machine freezes even when doing restart right after login). How can I determine what is causing the freeze? How can I fix this? I'm frankly rather disappointed because I bought this new machine in the hopes of getting the graphics to work, which failed miserably on my old machine, even though Ubuntu is supposed to be good with Nvidia. Being a fresh convert from Windows, I was hoping for a happier experience this time, so I'm very much looking forward to your suggestions! ... After posting this question, I see related questions in the right sidebar: this, this, and this. Don't know why these didn't show up while I composed by question. Those questions suggest some ACPI settings but I am not experienced enough to find/change those settings. I'll try the sudo shutdown -h now command when I get home and see if that works, then update this question. I did check the system BIOS but didn't see anything out of the ordinary.

  Read the article

• February 2011 Java SE and Java for Business Critical Patch Update Released

  - by eric.maurice

  Hello, this is Eric Maurice again. Oracle released the February 2011 Critical Patch Update for Java SE and Java for Business today. As discussed in a previous blog entry, Oracle currently maintains a separate Critical Patch Update schedule for Java SE and Java for Business because of commitments made prior to the Oracle acquisition in regards to the timing for the publication of Java fixes. Today's Java Critical Patch Update includes fixes for 21 vulnerabilities. The most severe CVSS Base Score for vulnerabilities fixed in this CPU is 10.0, and this Base Score affects 8 vulnerabilities. Out of these 21 vulnerabilities, 13 affect Java client deployments. 12 of these 13 vulnerabilities can be exploited through Untrusted Java Web Start applications and Untrusted Java Applets, which run in the Java sandbox with limited privileges. One of these 13 vulnerabilities can be exploited by running a standalone application. In addition, one of the client vulnerability affects Java Update, a Windows-specific component. 3 of the 21 vulnerabilities affect client and server deployments. These vulnerabilities can be exploited through Untrusted Java Web Start applications and Untrusted Java Applets, as well as be exploited by supplying malicious data to APIs in the specified components, such as, for example, through a web service. 3 vulnerabilities affect Java server deployments only. These vulnerabilities can be exploited by supplying malicious data to APIs in the specified Java components. Note that one of these vulnerabilities (CVE-2010-4476) was the subject of a Security Alert released on February 8th. Finally, one of these vulnerabilities is specific to Java DB, a component in the Java JDK, but not included in the Java Runtime Environment (JRE). As usual, because of the severity of the vulnerabilities fixed in this Critical Patch Update, Oracle recommends that Java customers apply it as soon as possible. The Critical Patch Advisory provides more details about the vulnerabilities addressed in the Critical Patch Update as well as instructions on how to install the fixes and where to get them. Home users should use the Java auto-update mechanism to install the latest version of the Java Runtime Environment 6 update 24 or higher (JRE), which includes the fix for this vulnerability. For More Information: The Critical Patch Updates and Security Alerts page is located at http://www.oracle.com/technetwork/topics/security/alerts-086861.html More information on Oracle Software Security Assurance is located at http://www.oracle.com/us/support/assurance/index.html Consumers can go to http://www.java.com/en/download/installed.jsp to ensure that they have the latest version of Java running on their desktops. More information on Java Update is available at http://www.java.com/en/download/help/java_update.xml

  Read the article

• Latency Matters

  - by Frederic P

  A lot of interest in low latencies has been expressed within the financial services segment, most especially in the stock trading applications where every millisecond directly influences the profitability of the trader. These days, much of the trading is executed by software applications which are trained to respond to each other almost instantaneously. In fact, you could say that we are in an arms race where traders are using any and all options to cut down on the delay in executing transactions, even by moving physically closer to the trading venue. The Solaris OS network stack has traditionally been engineered for high throughput, at the expense of higher latencies. Knowledge of tuning parameters to redress the imbalance is critical for applications that are latency sensitive. We are presenting in this blog how to configure further a default Oracle Solaris 10 installation to reduce network latency. There are many parameters in fact that can be altered, but the most effective ones are intr_blank_time and intr_blank_packets. These parameters affect on-board network throughput and latency on Solaris systems. If interrupt blanking is disabled, packets are processed by the driver as soon as they arrive, resulting in higher network throughput and lower latency, but with higher CPU utilization. With interrupt blanking disabled, processor utilization can be as high as 80–90% in some high-load web server environments. If interrupt blanking is enabled, packets are processed when the interrupt is issued. Enabling interrupt blanking can result in reduced processor utilization and network throughput, but higher network latency. Both parameters should be set at the same time. You can set these parameters by using the ndd command as follows: # ndd -set /dev/eri intr_blank_time 0 # ndd -set /dev/eri intr_blank_packets 0 You can add them to the /etc/system file as follows: set eri:intr_blank_time 0 set eri:intr_blank_packets 0 The value of the interrupt blanking parameter is a trade-off between network throughput and processor utilization. If higher processor utilization is acceptable for achieving higher network throughput, then disable interrupt blanking. If lower processor utilization is preferred and higher network latency is the penalty, then enable interrupt blanking. Our experience at ISV Engineering is that under controlled experiments the above settings result in reduction of network latency by at least 50%; on a two-socket 3GHz Sun Fire X4170 M2 running Solaris 10 Update 9, the above settings improved ping-pong latency from 60µs to 25-30µs with the on-board NIC.

  Read the article

• Synchronizing ODSEE and OUD

  - by Etienne Remillon

  When it comes to synchronizing between ODSEE and OUD, what should be the best options ? Couple  options are available - Use one of OUD internal capability called Replication Gateway - Use our synchronization tool called Directory Integration Platform part of Oracle Directory Services Plus - Manuel export and import Let's check pro and cons on each method. Replication Gateway is the natural, out of the box solution to perform the task. We created this as a feature of OUD because it works at our replication protocol level. The gateway perform the required adaptation between the ODSEE's replication protocol and OUD's one. The benefits of doing this is that it provide strong consistency between the to type of directories. This fully leverage conflict management implemented in the replication protocols to ensure that changes are applied in a coherent and ordered manner. It does not require specific modification on existing ODSEE production instances such as turning on "retro changelog". Changes are propagated at near speed of replication in both directions. Replication Gateway can also synchronize information that are stored internally in the directory server such as "xxxxx" account locking managed at ODSEE server level and not via the nsyyyy attribute. OUD replication gateway does no require any specific tools or installation specific procedure. It is manged like other OUD component with monitoring and configuration via the standard console. OUD Replication Gateway does not perform adaptation between ODSEE and OUD. Using Directory Integration Protocol as external component to OUD, brings flexibility in remapping and transformations between ODSEE and OUD. There is a price to pay in using DIP to perform the synchronization task. You will have to turn on the retro change log to get access to changes on the ODSEE side (this will impact disk and CPU usage and performances which could be a serious challenge for your existing ODSEE environment (if you have not provisioned additional hardware and instances). You will not benefits of conflict resolution management and this might have to be addressed at application level, which is not always possible to implement. Using export and import seams very simple, but this methodology cannot ensure an highly available deployment with up to date entries on booth sides. This solution can be used if full HA with up-to-date data is not needed (during synchronization time). It often used  if data-cleaning need to take place to avoid polluting a new environment with old un-necessary data.

  Read the article

• Cannot get 3D OpenGL support in Vmware guests, how can I fix this?

  - by jjapol

  I have been working at this problem for 2 days now. I cannot for the life of me enable 3D support in VMWare 9 guests. My specifications are: Hardware: Dell Latitude E5520 laptop. Processor: Intel i7-2620M CPU @ 2.70GHz × 4. Memory: 8GB. Video: Intel Sandybridge Mobile x86/MMX/SSE2 OS: Ubuntu 12.04.1 LTS, 32 bit. Vmware Workstation: 9.0.1 build-894247 Glxgears functions fine. Frame rate is ~60fps. Vmware guest: Windows 7 Starting the Windows 7 guest in VMware throws the following errors: No 3D support is available from the host. and Hardware graphics acceleration is not available. I've read through this VMware forum thread, but again the hardware in the post is different (nVidia). I've followed the instructions at this Ask Ubuntu post as closely as possible as the question is nearly the same as mine although my hardware is different. Answer 1 regarding setting mks.gl.allowBlacklistedDrivers = TRUE; in my vmx configuration file causes the VM to crash when it starts. The second answer I followed as closely as possible. I uninstalled VMware, Did sudo apt-get install build-essential linux-headers-$(uname -r) at a terminal, Added the PPA https://launchpad.net/~glasen/+archive/intel-driver, Then at a terminal did sudo apt-get update && sudo apt-get upgrade -y I reinstalled VMware and have the same results: no 3D in guests. I'm getting the feeling that something is awry with the Sandy Bridge driver, but I can't seem to come up with any solutions. Has anyone out there run across this problem also? By the way, the operation of the likes of Solidworks and AutoCad within a Windpws 7 guest does appear to be improved in VMware 9 vs VMware 8 in spite of the fact that 3D support is lacking in the Windows 7 guest. I'd also add that my glxinfo file was nearly identical to the glxinfo file posted at askubuntu.com/questions/181829/…. I had a total of seven minor differences per a comparison using Meld. –

  Read the article

• Parallel MSBuild FTW - Build faster in parallel

  - by deadlydog

  Hey everyone, I just discovered this great post yesterday that shows how to have msbuild build projects in parallel Basically all you need to do is pass the switches “/m:[NumOfCPUsToUse] /p:BuildInParallel=true” into MSBuild. Example to use 4 cores/processes (If you just pass in “/m” it will use all CPU cores): MSBuild /m:4 /p:BuildInParallel=true "C:\dev\Client.sln" Obviously this trick will only be useful on PCs with multi-core CPUs (which we should all have by now) and solutions with multiple projects; So there’s no point using it for solutions that only contain one project.  Also, testing shows that using multiple processes does not speed up Team Foundation Database deployments either in case you’re curious Also, I found that if I didn’t explicitly use “/p:BuildInParallel=true” I would get many build errors (even though the MSDN documentation says that it is true by default). The poster boasts compile time improvements up to 59%, but the performance boost you see will vary depending on the solution and its project dependencies.  I tested with building a solution at my office, and here are my results (runs are in seconds): # of Processes 1st Run 2nd Run 3rd Run Avg Performance 1 192 195 200 195.67 100% 2 155 156 156 155.67 79.56% 4 146 149 146 147.00 75.13% 8 136 136 138 136.67 69.85%   So I updated all of our build scripts to build using 2 cores (~20% speed boost), since that gives us the biggest bang for our buck on our solution without bogging down a machine, and developers may sometimes compile more than 1 solution at a time.  I’ve put the any-PC-safe batch script code at the bottom of this post. The poster also has a follow-up post showing how to add a button and keyboard shortcut to the Visual Studio IDE to have VS build in parallel as well (so you don’t have to use a build script); if you do this make sure you use the .Net 4.0 MSBuild, not the 3.5 one that he shows in the screenshot.  While this did work for me, I found it left an MSBuild.exe process always hanging around afterwards for some reason, so watch out (batch file doesn’t have this problem though).  Also, you do get build output, but it may not be the same that you’re used to, and it doesn’t say “Build succeeded” in the status bar when completed, so I chose to not make this my default Visual Studio build option, but you may still want to. Happy building! ------------------------------------------------------------------------------------- :: Calculate how many Processes to use to do the build. SET NumberOfProcessesToUseForBuild=1  SET BuildInParallel=false if %NUMBER_OF_PROCESSORS% GTR 2 (                 SET NumberOfProcessesToUseForBuild=2                 SET BuildInParallel=true ) MSBuild /maxcpucount:%NumberOfProcessesToUseForBuild% /p:BuildInParallel=%BuildInParallel% "C:\dev\Client.sln"

  Read the article

• Why is my laptop so sluggish? Or Damn You Facebook and Twitter! Or All Hail Chrome!

  - by John Conwell

  In the past three weeks, I've noticed that my laptop (dual core 2.1GHz, 2Gb RAM) has become amazingly sluggish.  I only uses for communications and data lookup workflows, so the slowness was tolerable.  But today I finally got fed up with the suckyness and decided to get to the root of the problem (I do have strong performance roots after all). It actually didn't take all that long to figure it out.  About a year ago I converted to Google Chrome (away from FireFox).  One of the great tools Chrome has is a "Task Manager" tool, that gives you Windows Task Manager like details for all the tabs open in the browser (Shift + Esc).  Since every tab runs in its own process, its easy from Task Manager (both Windows or Chrome) to identify and kill a single performance offending tab.  This is unlike IE, where you only get aggregate data about all tabs open.  Anyway, I digress.  Today my laptop sucked.  Windows Task Manager told me that I had two memory hogging Chrome tabs, but couldn't tell me which web page those tabs are showing.  Enter Chrome Task Manager which tells you the page title, along with CPU, memory and network utilization of each tab.  Enter my amazement.  Turns out Facebook was using just shy of half a Gb of RAM.  Half a Gigabyte!  That's 512 Megabytes!524,288 Kilobytes! 536,870,912 Bytes!  Or 4,294,967,296 Bits!  In other words, that's a frackin boat load of memory.  Now consider that Facebook is running on pretty much 96.3% (statistics based on absolutely nothing) of every house hold desktop, laptop, netbook, and mobile device in America, that is pretty horrific! And I wasn't playing any Facebook games like FarmWars or MafiaVille.  I just had my normal, default home page up showing me who just had breakfast, or just got finished with their morning run. I'm sorry...let me say that again...HALF A GIG OF RAM!  That is just unforgivable. I can just see my mom calling me up:  Mom: "John...I think I need a new computer.  Mine is really slow these days" John: "What do you have running?" Mom: "Oh, just Facebook" John: "Ok, close Facebook and tell me how fast your computer feels" Mom: "Well...I don't know how fast it is.  All I do is use Facebook" John: "Ok Mom, I'll send you a new computer by Tuesday" Oh yea...and the other offending web page?  It was Twitter, using a quarter of a Gigabyte. God I love social networks!

  Read the article

• Wrong statistics in AUX_STATS$ might puzzle the optimizer

  - by Mike Dietrich

  We do recommend the creation of System Statistics for quite a long time. Since Oracle 9i the optimizer works with a CPU and IO cost based model. And in order to give the optimizer some knowledge about the IO subsystem's performance and throughput - once System Statistics are collected - they'll get stored in AUX_STATS$. For this purpose in the old Oracle 9i days some default values had been defined - and you'll still find those defaults in Oracle Database 11g Release 2 in AUX_STATS$. But these old values don't reflect the performance of modern IO systems. So it might be a good best practice post upgrade to create fresh System Statistics if you haven't done this before.  You can collect System Statistics with: exec DBMS_STATS.GATHER_SYSTEM_STATS('start'); and end it later by executing: exec DBMS_STATS.GATHER_SYSTEM_STATS('stop'); You could also run DBMS_STATS.GATHER_SYSTEM_STATS('interval', interval=>N) instead where N is the number of minutes when statistics gathering is stopped automatically. Please make sure you'll do this on a real workload period. It won't make sense to gather these values while the database is in an idle state. You should do this ideally for several hours. It doesn't affect performance in a negative way as the values are anyway collected in V$SYSSTAT and V$SESSTAT. And in case you'd like to delete the stats and revert to the old default values you'd simply execute:exec DBMS_STATS.DELETE_SYSTEM_STATS; The tricky thing in Oracle Database 11.2 - and that's why I'm actually writing this blog post today - is bug9842771. This leads to wrong values in AUX_STATS$ for SREADTIM and MREADTIM by factor 1000 guiding the optimizer sometimes into the totally wrong directon. The workaround is to overwrite these values manually and divide them by 1000. Use the DBMS_STATS.SET_SYSTEM_STATS procedure. See this MOS Note:9842771.8 for the above bug for some further information. This issue is fixed in Oracle Database 11.2.0.3 and above. To get some background information about the statistics collected in please read this section in the Oracle Database 11.2 Performance Tuning Guide. And gathering System Statistics might have some implication if you have mixed workloads - and interacts with DB_FILE_MULTIBLOCK_READ_COUNT. For more information please read section 13.4.1.2.

  Read the article

• Monitor the Weather from Your Windows 7 Taskbar

  - by Asian Angel

  Keeping up with the weather forecast can be hard when you are extra busy with work. If you need a simple but nice looking way to integrate weather monitoring into your Taskbar then join us as we look at WeatherBar. Setting Up & Using WeatherBar To get started unzip the following files, place them in an appropriate “Program Files Folder”, and create a shortcut. When you start WeatherBar for the first time you will be presented with the following window and a random/default location. To get WeatherBar set up for your location there are only two settings to adjust (using the “Pencil & Gear Buttons”). Clicking on the “Pencil Button” will open up this small window…enter the name of your location and click “OK”. Next click on the “Gear Button” where you can choose the “Update Interval” and “Measurement Format” that best suits your needs. Click “OK” when finished and WeatherBar will be ready to go. That definitely looks nice. When you are finished viewing this window minimize it to the “Taskbar Icon” instead of clicking on the “Close Button”…otherwise the entire app will close. Left click on the “Taskbar Icon” to bring the window back up… Hovering the mouse over the “Taskbar Icon” provides a nice thumbnail of the weather forecast. Right clicking on the “Taskbar Icon” will display a nice mini forecast. Conclusion While WeatherBar may not be for everyone it does provide a nice easy way to monitor the weather from your “Taskbar” without taking up a lot of room. Links Download WeatherBar Similar Articles Productive Geek Tips Monitor the Weather for Your Location in ChromeCheck Weather Conditions in Real-time with Weather WatcherMonitor CPU, Memory, and Disk IO In Windows 7 with Taskbar MetersTaskbar Eliminator Does What the Name Implies: Hides Your Windows TaskbarBring Misplaced Off-Screen Windows Back to Your Desktop (Keyboard Trick) TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

  Read the article

• Ubuntu hangs on booting up after a update

  - by alFReD NSH

  I've made a clean install yesterday, for the first time restarted, everything went good and then after I updated packages and copied my old home directory to replace the new one, when I restarted it hung when it was booting. I tried reinstalling again and doing the same thing, but again same thing happened. Here's what I see, before when the Ubuntu logo with the five dots is shown: Then after that, 3 or 4 of the dots will load and hangs there. If I press arrow up before that, this will be shown I started my laptop again today(the pictures are for the day before) and after that, boot up with live CD and got the logs. dmesg: http://pastebin.com/aVxV7BQF syslog: http://pastebin.com/4E2BrRUK And some info: alfred@alFitop:~$ uname -a Linux alFitop 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lshw: http://pastebin.com/AZbKJmsT sources.list : http://pastebin.com/2HazmuyV My problem is a bit similar to here: http://ubuntuforums.org/showthread.php?t=1918271 Though I didn't change my x.org config. Only changed home directory and updated packages. I've tried memtest and fschk, both passed. In the recovery mode boot option, I've also realized that same things happen in failsafe graphical mode. But when I go into the network mode, I can boot up my system, but of course same the graphics are just basic. Adding blacklist intel_ips to /etc/modprobe.d/blacklist.conf solves the first message, but still I get the broken pipe and CPU stack traces. The current kernel version is 3.2.0-25, I've tried booting up in the 3.2.0-23(the one the installer came with, but same results.) Also uninstalled apparmor, didn't help. I've installed Ubuntu again, this time without copying the home directory, also same result. --- UPDATE --- This problem was solved before with removing backports, but its back again! I've updated my laptop last night and the problem came back. It's definitely one of these packages. My /var/log/apt/term.log and /var/log/apt/history.log. I'm almost having the same situation. --- UPDATE --- I realized this also have happened on times that I have updated(haven't restarted after it) and my computer power has been cut off and its shutdown due to lack of power. And I realized if I just do as I answered but not in somewhere without GUI(networking mode has the GUI) it wouldn't work.

  Read the article

• Server-infrastructure recommendations

  - by Tim van Elsloo

  Here's the thing: I need a cheap, fast, reliable infrastructure that can dynamically scale (like Amazon S3: cloud-storage). I'm thinking of 3 different type of 'servers'. Application-server Should be able to run CentOS (or another light Linux-distr.) Should be able to run Apache Should be able to run PHP Should be able to run GD (so it does rely on it's cpu). Should be extremely reliable and fast. Database-server Should be able to run MySQL Should be able to... well, do nothing else :P. Should be extremely reliable and fast. Storage-server Should be able to run some kind of file-transfer-deamon (like FTP, CouchDB, etc.) Should be able to do nothing else. Should be extremely reliable and fast. So technically, by transferring all static data to 2 different servers/services, the application-server can totally focus on the webpages. My questions: What services do you recommend? Which is cheaper, faster and more reliable: using my own server, or using some cloud-storage/cloud-computing-service (like Amazon S3, CloudFiles, etc.)? How can I prevent bandwidth abuse (such as dos-attacks causing the bill to be extremely high)? What's the difference between "including CDN" and "excluding CDN"? It seems the price doesn't differ at CloudFiles? Do you have to pay "including CDN" + "excluding CDN" when you decide to enable the delivery-network? Or have you only got to pay "including CDN"? Should I use my own nameserver too or can I use my domain-hoster's nameservers? What are the minimum software specifications of a nameserver. Can I write some software myself? Does anyone have a good protocol-description? I hope you can answer my questions. Answers I shouldn't write my own nameserver-software. Instead, I should use something like bind. (http://osspro.com/2010/05/04/linux-create-your-own-domain-name-server-dns/).

  Read the article

• Facebook Game database design

  - by facebook-100000781341887

  Hi, I'm currently develop a facebook mafia like PHP game(of course, a light weight version), here is a simplify database(MySQL) of the game id-a <int3> <for index> uid <chr15> <facebook uid> HP <int3> <health point> exp <int3> <experience> money <int3> <money> list_inventory <chr5> <the inventory user hold...some special here, talk next> ... and 20 other fields just like reputation, num of combat... *the number next to the type is the size(byte) of the type For the list_inventory, there have 40 inventorys in my game, (actually, I have 5 these kind of list in my database), and each user can only contain 1 qty of each inventory, therefore, I assign 5 char for this field and each bit of char as 1 item(5 char * 8 bit = 40 slot), and I will do some manipulation by PHP to extract the data from this 5 byte. OK, I was thinking on this, if this game contains 100,000 user, and only 10% are active, therefore, if use my method, for the space use, 5 byte * 100,000 = 500 KB if I use another method, create a table user_hold_inventory, if the user have the inventory, then insert a record into this table, so, for 10,000 active user, I assume they got all item, but for other, I assume they got no item, here is the fields of the new table id-b <int3> <for index> id-a <int3> <id of the user table> inv_no <int1> <inventory that user hold> for the space use, ([id] (3+3) byte + [inv_no] 1 byte ) * [active user] 10,000 * [all inventory] * 40 = 2.8 MB seems method 2 have use more space, but it consume less CPU power. Please comment these 2 method or please correct me if there have another better method rather than what I think. Another question is, my database contain 26 fields, but I counted 5 of them are not change frquently, should I need to separate it on the other table or not? So many words, thanks for reading :)

  Read the article

• 4.8M wasn't enough so we went for 5.055M tpmc with Unbreakable Enterprise Kernel r2 :-)

  - by wcoekaer

  We released a new set of benchmarks today. One is an updated tpc-c from a few months ago where we had just over 4.8M tpmc at $0.98 and we just updated it to go to 5.05M and $0.89. The other one is related to Java Middleware performance. You can find the press release here. Now, I don't want to talk about the actual relevance of the benchmark numbers, as I am not in the benchmark team. I want to talk about why these numbers and these efforts, unrelated to what they mean to your workload, matter to customers. The actual benchmark effort is a very big, long, expensive undertaking where many groups work together as a big virtual team. Having the virtual team be within a single company of course helps tremendously... We already start with a very big server setup with tons of storage, many disks, lots of ram, lots of cpu's, cores, threads, large database setups. Getting the whole setup going to start tuning, by itself, is no easy task, but then the real fun starts with tuning the system for optimal performance -and- stability. A benchmark is not just revving an engine at high rpm, it's actually hitting the circuit. The tests require long runs, require surviving availability tests, such as surviving crashes -and- recovery under load. In the TPC-C example, the x4800 system had 4TB ram, 160 threads (8 sockets, hyperthreaded, 10 cores/socket), tons of storage attached, tons of luns visible to the OS. flash storage, non flash storage... many things at high scale that all have to be perfectly synchronized. During this process, we find bugs, we fix bugs, we find performance issues, we fix performance issues, we find interesting potential features to investigate for the future, we start new development projects for future releases and all this goes back into the products. As more and more customers, for Oracle Linux, are running larger and larger, faster and faster, more mission critical, higher available databases..., these things are just absolutely critical. Unrelated to what anyone's specific opinion is about tpc-c or tpc-h or specjenterprise etc, there is a ton of effort that the customer benefits from. All this work makes Oracle Linux and/or Oracle Solaris better platforms. Whether it's faster, more stable, more scalable, more resilient. It helps. Another point that I always like to re-iterate around UEK and UEK2 : we have our kernel source git repository online. Complete changelog of the mainline kernel, and our changes, easy to pull, easy to dissect, easy to know what went in when, why and where. No need to go log into a website and manually click through pages to hopefully discover changes or patches. No need to untar 2 tar balls and run a diff.

  Read the article

• CES 2011–Microsoft Keynote Impressions

  - by guybarrette

  Microsoft has been kicking off the CES for a number of years by doing a keynote the evening of the event first day.  This year, SteveB talked about Xbox, Kinect, Windows 7 new laptops, Surface 2 and Windows vNext running on the ARM architecture. Some of the design of the new laptops showed are quite amazing.  This one has a dual screen with no physical keyboard.  The image is split between both screens.  A software keyboard appears when you place your 10 fingers on the lower screen. This one from Samsung has a sliding keyboard somewhat like numerous cell phones have. What I found the most amazing is that Intel was able to miniaturized a full Intel architecture (CPU, motherboard, memory) in a tiny form factor.  Imagine having the power of a full PC running .NET apps in a Zune/iPod form factor! They also showed V2 of the Surface device.  This one is called the Samsung SUR40 for Surface PC.  It’s much sleeker and it will likely loose the BAT (Big Ass Table) moniker  More info here SteveB announced that Windows vNext will run on ARM chips.  I’m intrigued by this announcement (you can read about it here) and I have many questions: -In the past ARM devices were slow, what now makes the ARM architecture able to run Windows? -ARM is 32-bit only, I think. -Does this mean that Intel wasn't able to provide such a lightweight architecture or simply that they weren't interested? -From what I understand, apps would need to be recompiled for ARM. Will we need to do that from an ARM PC or could it be done natively on Intel or on an Intel PC running in an ARM VM?  VS 2012? Ahhhh, smells like a cool PDC is coming up    Clearly it looks like PC have enough power for most of us right now and that the race is now about miniaturization, power consumption and battery life. You can watch the Microsoft CES 2011 keynote here var addthis_pub="guybarrette";

  Read the article

• How to troubleshoot ethernet port on laptop

  - by Psallas Vassilios

  I have a problem with my wired connection. To be more specific, my laptop doesn't seems to recognize that I have plugged in an ethernet cable. I tried to download new drivers for my ethernet card, but I couldn't find any solutions. Maybe because I am new to Linux, so I'm not familiar with running commands in the terminal. OK I have typed the command and here are the results: 00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter [1039:0191] (rev 02) For the second reply I don't know if the following is what you asked me: ?Memory: 3.9 GiB ?Processor: Intel Core 2 Duo CPU P8800 @ 2.66GHz × 2 ?OS type: 32-bit My Ethernet connection had some problem on Windows too. I have changed recently my internet provider, and since then my ethernet cable is not recognized by the laptop. At that time I was still on Windows. I thought that with Ubuntu the problem would be solved, but unfortunately the problem still persists. If someone can help me to solve my problem I'll be thankful. Here are the results of the three first commands you told me to run: lsmod | grep sis190 sis190 22570 0 sudo modprobe sis190 ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:90:81:7e UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:185 errors:0 dropped:0 overruns:0 frame:0 TX packets:185 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:22672 (22.6 KB) TX bytes:22672 (22.6 KB) wlan0 Link encap:Ethernet HWaddr 00:25:d3:2c:3a:ae inet addr:192.168.1.72 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::225:d3ff:fe2c:3aae/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:260 errors:0 dropped:0 overruns:0 frame:0 TX packets:363 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:71992 (71.9 KB) TX bytes:52000 (52.0 KB) and the results of running the last two commands: dmesg | grep -e eth -e sis190 [ 0.816667] sis190: sis190 Gigabit Ethernet driver 1.4 loaded [ 0.816728] sis190 0000:00:04.0: setting latency timer to 64 [ 0.816751] sis190: 0000:00:04.0: Read MAC address from EEPROM [ 0.904032] sis190: 0000:00:04.0: Realtek PHY RTL8201 transceiver at address [ 1.416030] sis190: 0000:00:04.0: Using transceiver at address 1 as default [ 1.448235] sis190 0000:00:04.0: eth0: 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f8410000 (IRQ: 19), 00:90:f5:90:81:7e [ 1.448238] sis190 0000:00:04.0: eth0: GMII mode. [ 1.448243] sis190 0000:00:04.0: eth0: Enabling Auto-negotiation [ 11.560907] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.372019] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.372265] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.424038] sis190 0000:00:04.0: eth0: auto-negotiating... nm-tool NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: sis190 State: unavailable Default: no HW Address: 00:90:F5:90:81:7E Capabilities: Carrier Detect: yes Wired Properties Carrier: off

  Read the article

• How are Reads Distributed in a Workload

  - by Bill Graziano

  People have uploaded nearly one millions rows of trace data to TraceTune.  That’s enough data to start to look at the results in aggregate.  The first thing I want to look at is logical reads.  This is the easiest metric to identify and fix. When you upload a trace, I rank each statement based on the total number of logical reads.  I also calculate each statement’s percentage of the total logical reads.  I do the same thing for CPU, duration and logical writes.  When you view a statement you can see all the details like this: This single statement consumed 61.4% of the total logical reads on the system while we were tracing it.  I also wanted to see the distribution of reads across statements.  That graph looks like this: On average, the highest ranked statement consumed just under 50% of the reads on the system.  When I tune a system, I’m usually starting in one of two modes: this “piece” is slow or the whole system is slow.  If a given piece (screen, report, query, etc.) is slow you can usually find the specific statements behind it and tune it.  You can make that individual piece faster but you may not affect the whole system. When you’re trying to speed up an entire server you need to identity those queries that are using the most disk resources in aggregate.  Fixing those will make them faster and it will leave more disk throughput for the rest of the queries. Here are some of the things I’ve learned querying this data: The highest ranked query averages just under 50% of the total reads on the system. The top 3 ranked queries average 73% of the total reads on the system. The top 10 ranked queries average 91% of the total reads on the system. Remember these are averages across all the traces that have been uploaded.  And I’m guessing that people mainly upload traces where there are performance problems so your mileage may vary. I also learned that slow queries aren’t the problem.  Before I wrote ClearTrace I used to identify queries by filtering on high logical reads using Profiler.  That picked out individual queries but those rarely ran often enough to put a large load on the system. If you look at the execution count by rank you’d see that the highest ranked queries also have the highest execution counts.  The graph would look very similar to the one above but flatter.  These queries don’t look that bad individually but run so often that they hog the disk capacity. The take away from all this is that you really should be tuning the top 10 queries if you want to make your system faster.  Tuning individually slow queries will help those specific queries but won’t have much impact on the system as a whole.

  Read the article

• Please Help Me Install Firestorm?

  - by Elle Caszatt

  I have been trying for hours just to install one program. In this time, I've tried my best to follow directions and not screw everything up but I have. I'm new to Linux. I tried to install Firestorm and this is what happened: parent@ubuntu:~$ sudo '/home/parent/Downloads/Phoenix_Firestorm-Release_i686_4.2.1.29803/install.sh' [sudo] password for parent: Enter the desired installation directory [/opt/firestorm-install]: /home/parent/downloads - Installing to /home/parent/downloads /home/parent/Downloads/Phoenix_Firestorm-Release_i686_4.2.1.29803/install.sh: line 80: /home/parent/downloads/etc/refresh_desktop_app_entry.sh: Permission denied parent@ubuntu:~$ sudo opt/firestorm-install sudo: opt/firestorm-install: command not found parent@ubuntu:~$ ./etc/refresh_desktop_app_entry.sh bash: ./etc/refresh_desktop_app_entry.sh: No such file or directory parent@ubuntu:~$ sudo '/home/parent/Downloads/Phoenix_Firestorm-Release_i686_4.2.1.29803/install.sh' Enter the desired installation directory [/opt/firestorm-install]: /home/parent - Backing up previous installation to /home/parent.backup-2012-08-27 - Installing to /home/parent cp: cannot stat `/home/parent/Downloads/Phoenix_Firestorm-Release_i686_4.2.1.29803/*': No such file or directory Failed parent@ubuntu:~$ Now whenever I go into my files it says it can't find anything. Like Cannot find home/parent/Downloads. Now, I KNOW there are downloads. I don't know why it's doing this all of a sudden. I'm so frustrated that I'm ready to just go back to Windows. I've already had to uninstall/reinstall Ubuntu once today. It's looking like I"m going to have to do it again. How can I fix my file problem that I'm now having and can someone please, please tell me how to install Firestorm? I mean they don't even have their repository listed. It's ridiculous to have to go through this over a program. Spotify wasn't hard at all to install so why is this? Someone please help, and I'm sorry if I sound like a total idiot. I'm pretty tech savvy but I'm honestly pretty upset after struggling with this for hours. Edit Okay, I see the problem with the directory files (showing the error I mentioned above when I try to click on them). I can only access my downloads, desktop, ect, through the backup that was created when I tried to install Firestorm. It's like that's the real home now. How can I get it back to the way it was? Edit Ubuntu has stopped working for me on reboot now. It doesn't go past the login screen. This is exactly what happened when I had to uninstall it before after trying to install Firestorm. Maybe I'm giving up too easily but I think I'm just going to go back to Windows. If this is what's going to happen every time I innocently try to install a program then it's just not worth it. I installed it specifically to run Firestorm because Windows sucks up a lot of CPU and causes lag. I still appreciate any input but this is just too much hassle for something that shouldn't be hard.

  Read the article

• Software Tuned to Humanity

  - by Phil Factor

  I learned a great deal from a cynical old programmer who once told me that the ideal length of time for a compiler to do its work was the same time it took to roll a cigarette. For development work, this is oh so true. After intently looking at the editing window for an hour or so, it was a relief to look up, stretch, focus the eyes on something else, and roll the possibly-metaphorical cigarette. This was software tuned to humanity. Likewise, a user’s perception of the “ideal” time that an application will take to move from frame to frame, to retrieve information, or to process their input has remained remarkably static for about thirty years, at around 200 ms. Anything else appears, and always has, to be either fast or slow. This could explain why commercial applications, unlike games, simulations and communications, aren’t noticeably faster now than they were when I started programming in the Seventies. Sure, they do a great deal more, but the SLAs that I negotiated in the 1980s for application performance are very similar to what they are nowadays. To prove to myself that this wasn’t just some rose-tinted misperception on my part, I cranked up a Z80-based Jonos CP/M machine (1985) in the roof-space. Within 20 seconds from cold, it had loaded Wordstar and I was ready to write. OK, I got it wrong: some things were faster 30 years ago. Sure, I’d now have had all sorts of animations, wizzy graphics, and other comforting features, but it seems a pity that we have used all that extra CPU and memory to increase the scope of what we develop, and the graphical prettiness, but not to speed the processes needed to complete a business procedure. Never mind the weight, the response time’s great! To achieve 200 ms response times on a Z80, or similar, performance considerations influenced everything one did as a developer. If it meant writing an entire application in assembly code, applying every smart algorithm, and shortcut imaginable to get the application to perform to spec, then so be it. As a result, I’m a dyed-in-the-wool performance freak and find it difficult to change my habits. Conversely, many developers now seem to feel quite differently. While all will acknowledge that performance is important, it’s no longer the virtue is once was, and other factors such as user-experience now take precedence. Am I wrong? If not, then perhaps we need a new school of development technique to rival Agile, dedicated once again to producing applications that smoke the rear wheels rather than pootle elegantly to the shops; that forgo skeuomorphism, cute animation, or architectural elegance in favor of the smell of hot rubber. I struggle to name an application I use that is truly notable for its blistering performance, and would dearly love one to do my everyday work – just as long as it doesn’t go faster than my brain.

  Read the article

• Profiling Startup Of VS2012 &ndash; Ants Profiler

  - by Alois Kraus

  I just downloaded ANTS Profiler 7.4 to check how fast it is and how deep I can analyze the startup of Visual Studio 2012. The Pro version which is useful does cost 445€ which is ok. To measure a complex system I decided to simply profile VS2012 (Update 1) on my older Intel 6600 2,4GHz with 3 GB RAM and a 32 bit Windows 7. Ants Profiler is really easy to use. So lets try it out. The Ants Profiler does want to start the profiled application by its own which seems to be rather common. I did choose Method Level timing of all managed methods. In the configuration menu I did want to get all call stacks to get full details. Once this is configured you are ready to go.   After that you can select the Method Grid to view Wall Clock Time in ms. I hate percentages which are on by default because I do want to look where absolute time is spent and not something else.   From the Method Grid I can drill down to see where time is spent in a nice and I can look at the decompiled methods where the time is spent. This does really look nice. But did you see the size of the scroll bar in the method grid? Although I wanted all call stacks I do get only about 4 pages of methods to drill down. From the scroll bar count I would guess that the profiler does show me about 150 methods for the complete VS startup. This is nonsense. I will never find a bottleneck in VS when I am presented only a fraction of the methods that were actually executed. I have also tried in the configuration window to also profile the extremely trivial functions but there was no noticeable difference. It seems that the Ants Profiler does filter away way too many details to be useful for bigger systems. If you want to optimize a CPU bound operation inside NUnit then Ants Profiler is with its line level timings a very nice tool to work with. But for bigger stuff it is certainly not usable. I also do not like that I must start the profiled application from the profiler UI. This makes it hard to profile processes which are started by some other process. Next: JetBrains dotTrace

  Read the article

• Partner BI Applications 4-Day Hands-on Training Workshop

  - by Mike.Hallett(at)Oracle-BI&EPM

  Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} 12th - 15th February 2012, Oracle Reading (UK) - REGISTER NOW This training will provide attendees with an in-depth working understanding of the architecture, the technical and the functional content of the Oracle Business Intelligence Applications, whilst also providing an understanding of their installation, configuration and extension. The course will cover the following topics: Overview of Oracle Business Intelligence Applications Oracle BI Applications Fundamentals and Features Configuring BI Applications for Oracle E-Business Suite Understanding BI Applications Architecture Fundamentals of BI Applications Security Prerequisites - This training is only for OPN member Partners. Good understanding of basic data warehousing concepts Hands on experience in Oracle Business Intelligence Enterprise Edition Hands on experience in Informatica Good understanding of any of the following Oracle EBS modules: General Ledger, Accounts Receivables, Accounts Payables Some understanding of  Oracle BI Applications is required (See Sales & Technical Tutorials for OBI, BI-Apps and Hyperion EPM)  Please note that attendees are required to bring a laptop. Laptop 4GB RAM-Recognized by Windows 64 bits 80GB free space in Hard drive or External Device CPU Core 2 Duo or Higher Operating System Requirements Windows 7, Windows XP, Windows 2003 NOT ALLOWED with Windows Vista An Administrator User

  Read the article

• Block-level deduplicating filesystem

  - by James Haigh

  I'm looking for a deduplicating copy-on-write filesystem solution for general user data such as /home and backups of it. It should use online/inline/synchronous deduplication at the block-level using secure hashing (for negligible chance of collisions) such as SHA256 or TTH. Duplicate blocks need not even touch the disk. The idea is that I should be able to just copy /home/<user> to an external HDD with the same such filesystem to do a backup. Simple. No messing around with incremental backups where corruption to any of the snapshots will nearly always break all later snapshots, and no need to use a specific tool to delete or 'checkout' a snapshot. Everything should simply be done from the file browser without worry. Can you imagine how easy this would be? I'd never have to think twice about backing-up again! I don't mind a performance hit, reliability is the main concern. Although, with specific implementations of cp, mv and scp, and a file browser plugin, these operations would be very fast, especially when there is a lot of duplication as they would only need to transfer the absent blocks. Accidentally using conventional copy tools that do not integrate with the FS would merely take longer, waste some bandwidth when copying remotely and waste some CPU, as the duplicate data would be re-read, re-transferred and re-hashed (although nothing would be re-written), but would absolutely not corrupt anything. (Some filesharing software may also be able to benefit by integrating with the FS.) So what's the best way of doing this? I've looked at some options: lessfs - Looks unmaintained. Any good? [Opendedup/SDFS][3] - Java? Could I use this on Android?! What does [SDFS][4] stand for? [Btrfs][5] - Some patches floating around on mailing list archives, but no real support. [ZFS][6] - Hopefully they'll one day relicense under a true Free/Opensource GPL-compatible licence. Also, 2 years ago I had a go at an attempt in Python using Fuse at the file-level to be used over the top of a typical solid FS such as EXT4, but I found Fuse for Python underdocumented and didn't manage to implement all of the system calls. My first post here, so I can't post more than 2 links until I get over 10 rep: [3]: http://www.opendedup.org/ [4]: https://en.wikipedia.org/w/index.php?title=SDFS&action=edit&redlink=1 [5]: https://en.wikipedia.org/wiki/Btrfs#Features [6]: https://en.wikipedia.org/wiki/ZFS#Linux

  Read the article

• 5.1 surround sound

  - by rocker9455

  Ok, So i've always had trouble with enabling 5.1 in ubuntu. Running 'alsamixer': I have: Master, Heaphones, PCM, Front, Front Mi, Front Mi, Surround, Center All are at 100% Card:HDA Intel Chip:Realtek ALC888 (This is my onboard sound, Its a dell studio, with 7.1 integrated sound) Running "speaker-test -c6 -twav" I only get the front 2 speakers (Right/Left) making any noise. The others make no noise at all. I have no other sound card to use as all my PCI slots are used up. Daemon.conf: ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10

  Read the article

• HTML5 game programming style

  - by fnx

  I am currently trying learn javascript in form of HTML5 games. Stuff that I've done so far isn't too fancy since I'm still a beginner. My biggest concern so far has been that I don't really know what is the best way to code since I don't know the pros and cons of different methods, nor I've found any good explanations about them. So far I've been using the worst (and propably easiest) method of all (I think) since I'm just starting out, for example like this: var canvas = document.getElementById("canvas"); var ctx = canvas.getContext("2d"); var width = 640; var height = 480; var player = new Player("pic.png", 100, 100, ...); also some other global vars... function Player(imgSrc, x, y, ...) { this.sprite = new Image(); this.sprite.src = imgSrc; this.x = x; this.y = y; ... } Player.prototype.update = function() { // blah blah... } Player.prototype.draw = function() { // yada yada... } function GameLoop() { player.update(); player.draw(); setTimeout(GameLoop, 1000/60); } However, I've seen a few examples on the internet that look interesting, but I don't know how to properly code in these styles, nor do I know if there are names for them. These might not be the best examples but hopefully you'll get the point: 1: Game = { variables: { width: 640, height: 480, stuff: value }, init: function(args) { // some stuff here }, update: function(args) { // some stuff here }, draw: function(args) { // some stuff here }, }; // from http://codeincomplete.com/posts/2011/5/14/javascript_pong/ 2: function Game() { this.Initialize = function () { } this.LoadContent = function () { this.GameLoop = setInterval(this.RunGameLoop, this.DrawInterval); } this.RunGameLoop = function (game) { this.Update(); this.Draw(); } this.Update = function () { // update } this.Draw = function () { // draw game frame } } // from http://www.felinesoft.com/blog/index.php/2010/09/accelerated-game-programming-with-html5-and-canvas/ 3: var engine = {}; engine.canvas = document.getElementById('canvas'); engine.ctx = engine.canvas.getContext('2d'); engine.map = {}; engine.map.draw = function() { // draw map } engine.player = {}; engine.player.draw = function() { // draw player } // from http://that-guy.net/articles/ So I guess my questions are: Which is most CPU efficient, is there any difference between these styles at runtime? Which one allows for easy expandability? Which one is the most safe, or at least harder to hack? Are there any good websites where stuff like this is explained? or... Does it all come to just personal preferance? :)

  Read the article

• Exalytics OBI11g Partner Training 3-day hands-on Workshops

  - by Mike.Hallett(at)Oracle-BI&EPM

  These FREE to OPN Partners hands-on workshops highlight both the hardware and software components that are engineered to work together to deliver Oracle Exalytics - an optimized version of the industry-leading Oracle TimesTen In-Memory Database with analytic extensions, a highly scalable Oracle server designed specifically for in-memory business intelligence, and Oracle's proven Business Intelligence Foundation (OBI 11g v 11.1.1.6 and Essbase) with enhanced visualization capabilities and performance optimizations. Priority will be given to Partner individuals who have passed or scheduled to take the Oracle Business Intelligence Foundation Suite 11g Essentials (1Z1-591) exam, and to Partners who have purchased an Exalytics for their own data centres to demonstrate it to their clients. Topics covered will include: Exalytics Architectural Overview Upgrade and Lifecycle Management Times Ten for Exalytics Summary Advisor Utility Essbase and EPM System on Exalytics Dashboard and Analysis Interactions OBIEE 11.1.1.6 Features and Advanced Topics After taking this course, you will be well prepared to architect, build, demo, and implement an end-to-end Exalytics solution.You will also be able to extend your current analytical and enterprise performance management application implementations with numerous Oracle technologies specifically enhanced to take advantage of the compute capacity and in-memory capabilities of Oracle Exalytics. Prerequisites Experience and understanding of OBIEE 11g is required ·       Previous attendance of Oracle Business Intelligence Foundation Suite Workshop or BIEE 11g Introduction Workshop is highly recommended, and priority will be given to Partner individuals who have passed or scheduled to take the Oracle Business Intelligence Foundation Suite 11g Essentials (1Z1-591) exam. Good understanding of data warehousing and data modelling for reporting and analysis purpose.  Strong experience with database technologies preferred Attendee to provide their own laptops which must meet the following minimum hardware/software requirements: Hardware Minimum 8GB RAM 60 GB free disk space (includes staging) USB 2.0 port (at least one available) It is strongly recommended that you bring a mouse. You will be working in a development environment and using the mouse heavily. Software One of the following operating systems: 64-bit Windows host/laptop OS 64-bit host/laptop OS with a Windows VM (XP, Server, or Win 7, BIC2g, etc.) Internet Explorer 7.x/8.x or Firefox 3.5.x WINRAR or 7ziputility to unzip workshop files: Download-able from http://www.win-rar.com/download.html Download-able from http://www.7zip.com/ Oracle VirtualBox 4.0.2 or higher Downloadable from http://www.virtualbox.org/wiki/Downloads CPU virtualization mode needs to be enabled. We will provide guidance on the day of the workshop.  Attendees will be given a VirtualBox image containing a pre-installed Oracle Exalytics environment. Register Here for 3-day Workshops: 11-Dec-12 Birmingham UK 29-Jan-13 Utrecht NL 12-Feb-13 Frankfurt Germany 12-Mar-13 Moscow Russia

  Read the article

• Unintentional run-in with C# thread concurrency

  - by geekrutherford

  For the first time today we began conducting load testing on a ASP.NET application already in production. Obviously you would normally want to load test prior to releasing to a production environment, but that isn't the point here.   We ran a test which simulated 5 users hitting the application doing the same actions simultaneously. The first few pages visited seemed fine and then things just hung for a while before the test failed. While the test was running I was viewing the performance counters on the server noting that the CPU was consistently pegged at 100% until the testing tool gave up.   Fortunately the application logs all exceptions including those unhandled to the database (thanks to log4net). I checked the log and low and behold the error was:   System.ArgumentException: An item with the same key has already been added. (The rest of the stack trace intentionally omitted)   Since the code was running with debug on the line number where the exception occured was also provided. I began inspecting the code and almost immediately it hit me, the section of code responsible for the exception is trying to initialize a static class. My next question was how is this code being hit multiple times when I have a rudimentary check already in place to prevent this kind of thing (i.e. a check on a public variable of the static class before entering the initializing routine). The answer...the check fails because the value is not set before other threads have already made it through.   Not being one who consistently works with threading I wasn't quite sure how to handle this problem. Fortunately a co-worker recalled having to lock a section of code in the past but couldn't recall exactly how. After a quick search on Google the solution is as follows:   Object objLock = new Object(); lock(objLock) { //logic requiring lock }   The lock statement takes an object and tells the .NET runtime that the current thread has exclusive access while the code within brackets is executing. Once the code completes, the lock is released for another thread to utilize.   In my case, I only need to execute the inner code once to initialize my static class. So within the brackets I have a check on a public variable to prevent it from being initialized again.

  Read the article

< Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >