Search Results

Search found 21005 results on 841 pages for 'disk format'.

Page 174/841 | < Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >

• Windows Embedded CE DiskPrep PowerToy

  - by Bruce Eitman

  Kurt Kennett from Microsoft has offered up a handy new tool. This tool is useful for creating a boot disk for x86 Windows CE systems that use the BIOSLoader. This is especially useful for creating disks with formats other than FAT16, which are fairly easy to create. I am letting you know about this new tool, but I have to be honest in telling you that I haven’t used it myself because it is for Windows Vista and Windows 7 – which I don’t have available right now. But you can bet that I will be setting up a virtual machine to give it a try. Here is what Kurt has to say about the tool: Download the DiskPrep Tool  DiskPrep can prepare any hard disk that can be attached to your development PC so that it can boot your X86-based Windows CE OS Design. USB disks (including disk "keys"), Compact Flash Cards, and SD cards all work if your system bios can boot from that type of media. FAT16, FAT32, and exFAT all supported. DOS is not used - the program prepares the bios loader on the disk and only uses that. If you use Windows Vista or Windows 7, you can use VHD files for VirtualPC. This allows for rapid prototyping of a self-booting system. Copyright © 2010 – Bruce Eitman All Rights Reserved

  Read the article

• How do I install GRUB on a RAID system installation?

  - by root45

  I'm trying to setup and install Ubuntu on a RAID 1 setup. I have two disks, sdb and sdc. I've been following this guide https://help.ubuntu.com/community/Installation/SoftwareRAID which more or less works for getting everything set up and Ubuntu installed. The problem is at the end of the installation, it tries to install GRUB. By default it tries my "first disk", which gives a "fatal error". I've tried installing it on a specific partion, e.g. sdb1 as well as RAID devices, e.g. md0, md1, etc.. Nothing seems to work. Edit: The actual error is "Unable to install GRUB in /dev/sdb Executing 'grub-install '/dev/sdb' failed. This is a fatal error." Then I'm taken back to the main install menu. If I choose "Install the GRUB boot loader on a hard disk" option, I can pick the partition, but entering sdb2 or md1 gives the same error. So I went ahead an just didn't install GRUB, which means now I presumably have a working Ubuntu installation, but I can't boot it. I've tried booting from the LiveCD to install GRUB, but I can't chroot into my system because it doesn't seem to recognize that my disk is a Linux disk. There's an error about it being a RAID partition. So basically I would really like to know how you know to which device to install GRUB at installation, or at the very least, how to install it on to my system now. I suppose I should also mention that sda is a Windows 7 installation that I would like to keep around and be able to access at boot. Thanks for any help.

  Read the article

• Persistence problem when installing USB Ubuntu variant using Windows

  - by Derek Redfern

  I'm part of a project called One2One2Go - we're developing a Live USB Ubuntu variant for use in schools in Somerville, MA. We have the project files compiled into an iso, and when installed using the native Ubuntu Startup Disk Creator, the USB works fine. When installed using a tool on a Windows machine (LiLi at linuxliveusb.com or liveusb-creator at fedorahosted.org/liveusb-creator), the USB works, but does not have persistence. This happens even if the creator is specifically set to allocate an area for persistent files. When comparing files on sticks created in Windows or Ubuntu, the one file that is different is syslinux/syslinux.cfg. I have printed the contents of the file below: Installed on Windows: DEFAULT nomodset LABEL debug menu label ^debug kernel /casper/vmlinuz append boot=casper xforcevesa initrd=/casper/initrd.gz -- LABEL nomodset menu label ^nomodset kernel /casper/vmlinuz append boot=casper quiet splash nomodset initrd=/casper/initrd.gz -- LABEL memtest menu label ^Memory test kernel /install/memtest append - LABEL hd menu label ^Boot from first hard disk localboot 0x80 append - PROMPT 0 TIMEOUT 1 Installed on Ubuntu: DEFAULT nomodset LABEL debug menu label ^debug kernel /casper/vmlinuz append noprompt cdrom-detect/try-usb=true persistent boot=casper xforcevesa initrd=/casper/initrd.gz -- LABEL nomodset menu label ^nomodset kernel /casper/vmlinuz append noprompt cdrom-detect/try-usb=true persistent boot=casper quiet splash nomodset initrd=/casper/initrd.gz -- LABEL memtest menu label ^Memory test kernel /install/memtest append - LABEL hd menu label ^Boot from first hard disk localboot 0x80 append - PROMPT 0 TIMEOUT 1 For troubleshooting reasons, I changed the Windows-created syslinux.cfg to match the one created by Ubuntu and persistence worked on it. I think the problem is that on the stick created by Windows, there is no "persistent" flag, but I don't know why. Is this a problem with our disk image or with the creator? How would I go about fixing this problem? Thanks in advance for your help. Derek Redfern

  Read the article

• How to start a task before networking?

  - by user1252434

  I've written an upstart task that modifies /etc/network/interfaces. (Actually a file sourced into it.) Which start on condition do I need to declare to let my task run before any networking jobs? I've tried start on starting networking, but that's apparently too late. When I log in after booting I can see that the changes were written, but obviously they are not used: the new config states a static IP, but the boot process waits for a non-existing DHCP server (old config) to time out. I've also tried start on starting network-interface INTERFACE=eth0, which didn't work either. IIRC there was an error in the log that the change couldn't be written. Background: I need a VM template that can be cloned and the clones configured through a script. Among other settings, I need to give them a static IP address to access them from the host. I use guestfish to write a config file to one of the virtual disks and let a script apply these settings to the system. I don't want that disk to contain an actual system settings file. I can't modify /etc directly, because that disk is shared (copy-on-write/diff) among the clones and guestfish apparently doesn't support that type of image. I could also let them use DHCP and setup a server that assigns IP by MAC, but I'm afraid of the complexity. I could also add just another virtual disk for configuration files, but if possible I'd prefer to store settings directly on the system disk image. Used software: Ubuntu Server 12.04, VirtualBox. The configuration modifier is a self written ruby script.

  Read the article

• 'Binary XML' for game data?

  - by bluescrn

  I'm working on a level editing tool that saves its data as XML. This is ideal during development, as it's painless to make small changes to the data format, and it works nicely with tree-like data. The downside, though, is that the XML files are rather bloated, mostly due to duplication of tag and attribute names. Also due to numeric data taking significantly more space than using native datatypes. A small level could easily end up as 1Mb+. I want to get these sizes down significantly, especially if the system is to be used for a game on the iPhone or other devices with relatively limited memory. The optimal solution, for memory and performance, would be to convert the XML to a binary level format. But I don't want to do this. I want to keep the format fairly flexible. XML makes it very easy to add new attributes to objects, and give them a default value if an old version of the data is loaded. So I want to keep with the hierarchy of nodes, with attributes as name-value pairs. But I need to store this in a more compact format - to remove the massive duplication of tag/attribute names. Maybe also to give attributes native types, so, for example floating-point data is stored as 4 bytes per float, not as a text string. Google/Wikipedia reveal that 'binary XML' is hardly a new problem - it's been solved a number of times already. Has anyone here got experience with any of the existing systems/standards? - are any ideal for games use - with a free, lightweight and cross-platform parser/loader library (C/C++) available? Or should I reinvent this wheel myself? Or am I better off forgetting the ideal, and just compressing my raw .xml data (it should pack well with zip-like compression), and just taking the memory/performance hit on-load?

  Read the article

• Permission denied on /dev/xvdf despite sudo?

  - by Sid

  I'm trying to get a stream off port 9999 and write to /dev/xvdf. I'm using Amazon EC2 with the Ubuntu 11.10 server image. By default I log in as 'ubuntu' which has sudo privileges. However, when I run the following netcat command, I get this error ubuntu@ip-10-252-35-122:~$ ls -al /dev/xv* brw-rw---- 1 root disk 202, 1 2011-11-30 22:22 /dev/xvda1 brw-rw---- 1 root disk 202, 80 2011-11-30 22:27 /dev/xvdf ubuntu@ip-10-252-35-122:~$ sudo netcat -p 9999 -l > /dev/xvdf bash: /dev/xvdf: Permission denied ubuntu@ip-10-252-35-122:~$ Any idea why I get the permission denied error and how I can work around it? Update: Something mysterious is running in the background that resets the permissions? Check the snippet below and the permission flags seem to automatically reset when I try using /dev/xvdf !?! ubuntu@ip-10-252-35-122:~$ sudo chmod 777 /dev/xvdf ubuntu@ip-10-252-35-122:~$ ls -al /dev/xvdf brwxrwxrwx 1 root disk 202, 80 2011-11-30 22:43 /dev/xvdf ubuntu@ip-10-252-35-122:~$ sudo nc -p 9999 -l > /dev/xvdf This is nc from the netcat-openbsd package. An alternative nc is available in the netcat-traditional package. usage: nc [-46DdhklnrStUuvzC] [-i interval] [-P proxy_username] [-p source_port] [-s source_ip_address] [-T ToS] [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]] [hostname] [port[s]] ubuntu@ip-10-252-35-122:~$ ls -al /dev/xvdf brw-rw---- 1 root disk 202, 80 2011-11-30 22:43 /dev/xvdf ubuntu@ip-10-252-35-122:~$ I'm using stock Ubuntu Amazon EC2 images from http://alestic.com/ (links to images at the top)

  Read the article

• What is the best approach for inline code comments?

  - by d1egoaz

  We are doing some refactoring to a 20 years old legacy codebase, and I'm having a discussion with my colleague about the comments format in the code (plsql, java). There is no a default format for comments, but in most cases people do something like this in the comment: // date (year, year-month, yyyy-mm-dd, dd/mm/yyyy), (author id, author name, author nickname) and comment the proposed format for future and past comments that I want is: // {yyyy-mm-dd}, unique_author_company_id, comment My colleague says that we only need the comment, and must reformat all past and future comments to this format: // comment My arguments: I say for maintenance reasons, it's important to know when and who did a change (even this information is in the SCM). The code is living, and for that reason has a history. Because without the change dates it's impossible to know when a change was introduced without open the SCM tool and search in the long object history. because the author is very important, a change of authors is more credible than a change of authory Agility reasons, no need to open and navigate through the SCM tool people would be more afraid to change something that someone did 15 years ago, than something that was recently created or changed. etc. My colleague's arguments: The history is in the SCM Developers must not be aware of the history of the code directly in the code Packages gets 15k lines long and unstructured comments make these packages harder to understand What do you think is the best approach? Or do you have a better approach to solve this problem?

  Read the article

• SD-CARD reader does not show in ubuntu

  - by shantanu

  I bought Acer asipre 4250. It have built-in SD card reader. But it is not working. Nothing show in /media or fdisk but something in dmesg. dmesg: new high-speed USB device number 3 using ehci_hcd [ 127.396733] scsi5 : usb-storage 2-2:1.0 [ 128.526562] scsi 5:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 128.532512] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 129.008110] ohci_hcd 0000:00:12.0: PCI INT A disabled [ 129.032083] ohci_hcd 0000:00:13.0: PCI INT A disabled [ 129.056411] ohci_hcd 0000:00:16.0: PCI INT A disabled [ 129.338026] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 129.808328] ohci_hcd 0000:00:14.5: PCI INT C disabled [ 167.728616] usb 2-2: USB disconnect, device number 3 [ 169.872284] ehci_hcd 0000:00:13.2: PCI INT B disabled [ 169.872340] ehci_hcd 0000:00:13.2: PME# enabled fdisk -l: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0006bc6d Device Boot Start End Blocks Id System /dev/sda1 * 2048 48828415 24413184 7 HPFS/NTFS/exFAT /dev/sda2 48828416 50829311 1000448 82 Linux swap / Solaris /dev/sda3 50829312 99657727 24414208 83 Linux /dev/sda4 99659774 625141759 262740993 5 Extended Partition 4 does not start on physical sector boundary. /dev/sda5 99659776 275439615 87889920 7 HPFS/NTFS/exFAT /dev/sda6 275441664 451221503 87889920 7 HPFS/NTFS/exFAT /dev/sda7 451223552 625141759 86959104 7 HPFS/NTFS/exFAT I found another problem just right now. I format last three drives as EXT4 with disk utility. But they are showing as NTFS/exFAT in fdisk. :-(

  Read the article

• 12.04 - How do I Fix Grub Error 15 on New Dual Boot Install

  - by Garth

  I just installed 12.04 to Dual Boot (separate partitions) with an existing Win 7. Upon reboot after install things freeze after Grub 1.5 with a Grub Error 15 message. Is there any easy way to fix this? (I am posting this from my second computer) UPDATE: I managed to boot into both 12.04 and Win7 using BIOS: Selected the disk with the Win7 'C' Partition: resulted in the same error message Rebooted, tried the disk with the Ubuntu Partitions: *Grub Menu loaded: Managed to boot 12.04, rebooted, used BIOS again: Managed to boot Win 7 So, I have access to my computer again (thru BIOS), but this has been a pretty crappy install experience. Garth I used the the Final release 12.04 Ubuntu install disk, reformatted all Linux partitions, and expected a simple clean install. Other than specifying the Ubuntu Partitions, I did a basic install of 12.04. No way I did do anything to get this crap error failure! I have no idea why my install resulted in a Grub-15 error. CLOSED - Answered my own Question: I burned a RescuTux Disk and used it to recover grub2 (simplest and easiest way for me. http://www.supergrubdisk.org/category/download/rescatuxdownloads/ Garth

  Read the article

• Kingston SD reader not working for USB3

  - by user1146334

  I have a Kingston 4-in-1 Multimedia reader. When my PC was formatted with Win7 it worked fine. I decided to change to Ubuntu 14.04 and now it doesn't work. If I plug it into one of the USB2 ports it works fine, but whenever I plug it into one of the USB3 ports, it thinks about it for a minute and then dies. Here's the output of dmesg when it dies [110262.148656] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd [110262.170330] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [110262.266379] usb 4-1: New USB device found, idVendor=11b0, idProduct=6348 [110262.266386] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [110262.266390] usb 4-1: Product: USB3.0 Media Reader [110262.266394] usb 4-1: Manufacturer: Kingston [110262.266398] usb 4-1: SerialNumber: 08735314400198 [110262.272929] usb-storage 4-1:1.0: USB Mass Storage device detected [110262.273239] scsi15 : usb-storage 4-1:1.0 [110263.290056] scsi 15:0:0:0: Direct-Access FCR-HS3 -0 1.00 PQ: 0 ANSI: 4 [110263.306622] scsi 15:0:0:1: Direct-Access FCR-HS3 -1 1.00 PQ: 0 ANSI: 4 [110263.323292] scsi 15:0:0:2: Direct-Access FCR-HS3 -2 1.00 PQ: 0 ANSI: 4 [110263.339858] scsi 15:0:0:3: Direct-Access FCR-HS3 -3 1.00 PQ: 0 ANSI: 4 [110263.340332] sd 15:0:0:0: Attached scsi generic sg3 type 0 [110263.340706] sd 15:0:0:1: Attached scsi generic sg4 type 0 [110263.340850] sd 15:0:0:2: Attached scsi generic sg5 type 0 [110263.340975] sd 15:0:0:3: Attached scsi generic sg6 type 0 [110264.651847] sd 15:0:0:1: [sde] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) [110264.667049] sd 15:0:0:1: [sde] Write Protect is off [110264.667055] sd 15:0:0:1: [sde] Mode Sense: 2f 00 00 00 [110264.682767] sd 15:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [110264.694975] sd 15:0:0:2: [sdf] Attached SCSI removable disk [110264.697933] sd 15:0:0:3: [sdg] Attached SCSI removable disk [110264.729918] sd 15:0:0:0: [sdd] Attached SCSI removable disk [110264.754189] sde: sde1 [110264.760114] sd 15:0:0:1: [sde] Attached SCSI removable disk [110275.377368] usb 4-1: reset SuperSpeed USB device number 3 using xhci_hcd [110275.398453] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [110275.436592] xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802e4fb9980 [110275.436600] xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802e4fb99c0 [110277.263444] usb 4-1: USB disconnect, device number 3

  Read the article

• Cannot boot computer, help please :(

  - by Austin

  Ok so here is more descriptions, I REALLY NEED HELP! I installed Ubuntu on a disk (unsure of v. I can't check.. Computer is broke :/ ) I then burned the disk I restarted computer pressed f12 blah blah it came up, I pressed enter for English, I plugged an Ethernet card in for better connection, and then started the installation.... I did the basics, and I entered a host name, and a user name and pass all that, when it came to partition page, I presse enter for no and then it went back to the installation page, I pressed install again, and it brought me back, so I selected yes , it loaded an it asked what software to instal I selected sh ( it was first option and I didn't know which to do ) so after everything finished loading, my disk was ejected the process finish, I run my computer and it opens up in log in page on cmd script I didn't know it, so I ran disk again makin a user and pass to remember.... Going back to login thing I logged in, and all it did was say my username... I didn't know what to do from there, I looked online found nothing but grub stuff, so I went to "Advanced Ubuntu options" and then "(Recovery Mode) and went to update grub... In middle o loading it asked to continue (Y/n) I typed Y and it finished, it went back to the options located in (Recovery Mode) and I closed it, and it loaded... And then showed up in another script screen, saying a paragraph on top, and on left side ( where login: would be located etc. ) it says "Grub" and I don't know what to type, if I turn off computer and turn back on it just goes straight to that again... PLEASE HELP:(

  Read the article

• Stuck With grub rescue> console

  - by rej santos

  Here is the background of my issue: I just recently installed the latest version of Ubuntu along side with Windows 8 Enterprise. However upon checking the disk size, it seems that some of the portions of the hd memory were gone so I decided to check the disk partition and have seen that is was being used by another file system. Thinking that the Ubuntu takes it boots stuff from my drive C: , I deleted that partition and formated so I can use it to store some movies, music etc. Now, as I switch on my machine, I am stucked with: error: unknown filesystem grub rescue> I googled a lot and saw the following command which seems no to me like sudo, chainloader etc, all of these command only returns unknown command in the console. What I just wanted is to boot from my Windows 8 OS. Just to add, I can't open the BIOS menu so I could choose what media to boot. As I open my machine it automatically takes me to grub rescue console. Here are the thing I already have: Ubuntu Installation Disk Windows 8 System repair Disk I just don't know how to boot into these things. Let me know what to do.

  Read the article

• How can a usb be detected but not show up anywhere?

  - by George Mauer

  I started the morning by trying to create a bootable usb using a 2gb stick and the startup disk creator. It seemed to run through the whole process just fine until it got to a screen that read something like "Creating memory partion" and which sat on 100% for about 45 minutes before I hit cancel and removed the usb stick. Now the usb stick is not being detected as storage or...anything (even on my windows pc) though it does show up in the syslog. Allow me to demonstrate. We start with the usb not plugged in: [georgemauer@ubuntu:~]$ sudo fdisk -l (04-04 16:01) Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x994bdc0f Device Boot Start End Blocks Id System /dev/sda1 2048 27650047 13824000 27 Hidden NTFS WinRE /dev/sda2 * 27650048 27854847 102400 7 HPFS/NTFS/exFAT /dev/sda3 27854848 976771119 474458136 7 HPFS/NTFS/exFAT I plug in the usb: [georgemauer@ubuntu:~]$ tail -f /var/log/syslog ***Snip*** Apr 4 15:01:18 ubuntu wpa_supplicant[1136]: WPA: Group rekeying completed with 00:24:36:ad:e7:3f [GTK=TKIP] Apr 4 15:02:29 wpa_supplicant[1136]: last message repeated 3 times Apr 4 15:02:29 ubuntu kernel: [22122.788133] usb 2-1: new high speed USB device number 13 using ehci_hcd Apr 4 15:02:29 ubuntu kernel: [22122.923873] scsi10 : usb-storage 2-1:1.0 Apr 4 15:02:29 ubuntu mtp-probe: checking bus 2, device 13: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-1" Apr 4 15:02:30 ubuntu mtp-probe: bus: 2, device: 13 was not an MTP device Apr 4 15:02:30 ubuntu kernel: [22123.926154] scsi 10:0:0:0: Direct-Access GENERIC USB Mass Storage 1.00 PQ: 0 ANSI: 2 Apr 4 15:02:30 ubuntu kernel: [22124.105118] sd 10:0:0:0: Attached scsi generic sg1 type 0 Apr 4 15:02:30 ubuntu kernel: [22124.108212] sd 10:0:0:0: [sdb] Attached SCSI removable disk but then: [georgemauer@ubuntu:~]$ ls /mnt -alF (04-04 16:02) total 8 drwxr-xr-x 2 root root 4096 2011-04-21 12:51 ./ drwxr-xr-x 26 root root 4096 2012-03-31 13:16 ../ [georgemauer@ubuntu:~]$ ls /media -alF (04-04 16:03) total 8 drwxr-xr-x 2 root root 4096 2012-04-04 12:18 ./ drwxr-xr-x 26 root root 4096 2012-03-31 13:16 ../ What could be going on and how do I recover my usb key?

  Read the article

• Can't access external hard drives or thumb drives

  - by calden

  I am not a complete linux noob but I don't know a lot either and would greatly appreciate some help with this. I just installed Ubuntu 10.10 onto my laptop. Everything is working great however USB devices such as thumb drives and external hard drives wont show up. I have been looking around a bit and when I run sudo fdisk -l it displays this: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00065684 Device Boot Start End Blocks Id System /dev/sda1 * 1 29255 234983424 83 Linux /dev/sda2 29255 30402 9212929 5 Extended /dev/sda5 29255 30402 9212928 82 Linux swap / Solaris Disk /dev/sdb: 16.0 GB, 16026435072 bytes 64 heads, 32 sectors/track, 15283 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000df90d Device Boot Start End Blocks Id System /dev/sdb1 * 1 15283 15649776 7 HPFS/NTFS It does seem to display my 16 gig thumb drive but other then seeing it here I cant access it to read and write files to it. It does the same with my external hard drive. I know those devices work as I have tried them on my other computer and they are working fine. Also this is what is in fstab if this will help anybody help me: proc /proc proc nodev,noexec,nosuid 0 0 /dev/sdb1 / ext4 errors=remount-ro 0 1 /dev/sdb5 none swap sw 0 0 Thank you very much for the help everyone.

  Read the article

• Order in which passphrase is asked for encrypted volumes

  - by Lars Kotthoff

  I have installed 12.10 on a machine with two disks. The root partition is on one disk, the swap partition on the other. Both disks are encrypted and I have added the corresponding entries to /etc/crypttab. During boot, it asks for the passphrase for the disk with the root filesystem. Then it continues booting and gets to the login screen before I get a chance to enter the passphrase for the other disk. After logging in, I verified that it was actually waiting for me to enter the passphrase for that second partition (askpass process is running). But at that point, I have no way of entering the passphrase anymore. The manpage for crypttab suggests that the order in which the volumes are specified matters, so I changed it to have the swap disk first. I updated the initramfs and grub afterwards, but it didn't make any difference. How can I specify the order in which the encrypted partitions are unlocked? I'm looking for a solution that either asks for the swap passphrase first or tells the system to wait until all encrypted partitions are unlocked before displaying the login screen.

  Read the article

• Ubuntu installer does not show drives

  - by Tanweer Rashid

  I am trying to install Ubuntu 12.04 LTS on my Inspiron laptio, but the installer does not show any drives. My system has a 1TB SATA drive and a 32GB SSD. As far as I can figure, the boot files are kept on the SSD for fast startup (for Windows). During Win7 installation, I had to manually load drivers for RAID controller to see all available drives. Running fdisk -l from the live CD shows the following: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x234b4782 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility /dev/sda2 * 81920 41627647 20772864 7 HPFS/NTFS/exFAT /dev/sda3 41627648 357019647 157696000 7 HPFS/NTFS/exFAT /dev/sda4 357019648 1953517567 798248960 f W95 Ext'd (LBA) /dev/sda5 672415744 1312966655 320275456 7 HPFS/NTFS/exFAT /dev/sda6 1312968704 1953517567 320274432 7 HPFS/NTFS/exFAT Disk /dev/sdb: 32.0 GB, 32017047552 bytes 255 heads, 63 sectors/track, 3892 cylinders, total 62533296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x234b474b Device Boot Start End Blocks Id System /dev/sdb1 2048 16775167 8386560 84 OS/2 hidden C: drive ubuntu@ubuntu:~$ In the Ubuntu installer, I can only choose /dev/sdb for "Device for boot loader installation", and sdb doesn't show any drives. I cannot select /dev/sda. Any ideas anyone? Thanks.

  Read the article

• One of the partion on a usb harddisk cannot automount

  - by holmescn

  It is a very strange problem. My usb harddisk has four partitions, one is primary, the other three are logical (contained within an extended partition). When I plug in the disk, three of the partitions are mounted automatically except one--the first logical partition in the extended partition. Initially I thought it is the problem of system (at that time I used Mint). But after I change to Ubuntu 12.04, the problem wasn't solved. I don't want to add a rule in fstab, and I want to know what happened. The disk is fine, and the partition can be accessed in Windows and mounted manually. result of dmesg | tail: [100933.557649] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd [100933.651891] scsi8 : usb-storage 2-1.2:1.0 [100934.649047] scsi 8:0:0:0: Direct-Access SAMSUNG PQ: 0 ANSI: 0 [100934.650963] sd 8:0:0:0: Attached scsi generic sg2 type 0 [100934.651342] sd 8:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [100934.651977] sd 8:0:0:0: [sdb] Write Protect is off [100934.651989] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00 [100934.652836] sd 8:0:0:0: [sdb] No Caching mode page present [100934.652848] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.655354] sd 8:0:0:0: [sdb] No Caching mode page present [100934.655367] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.734652] sdb: sdb1 sdb3 < sdb5 sdb6 sdb7 > [100934.737706] sd 8:0:0:0: [sdb] No Caching mode page present [100934.737725] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.737731] sd 8:0:0:0: [sdb] Attached SCSI disk result of parted -l: Model: SAMSUNG (scsi) Disk /dev/sdb: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 21.5GB 21.5GB primary ntfs 3 21.5GB 320GB 299GB extended lba 5 21.5GB 129GB 107GB logical ntfs 6 129GB 236GB 107GB logical ntfs 7 236GB 320GB 83.8GB logical ntfs

  Read the article

• Can't play Steel Storm, Burning Retribution

  - by Goytor

  I've bougth Steel Storm, Burning Retribution in the Software Center, and every time I run it shows the following message: You have reached this menu due to missing or unlocable content/data You may consider adding -base dir /path/to/game to your launch commandline I've gone to main menu in the preferences tab and changed the launcher to no avail. I've tried running it from console, with /opt/steelstorm-episode2/steelstorm, I got: Game is Steel-Storm using base gamedir gamedata Steel-Storm Linux 01:07:07 Jun 11 2011 - release Playing shareware version. Skeletal animation uses SSE code path DPSOFTRAST available (SSE2 instructions detected) Failed to init SDL joystick subsystem: couldn't exec quake.rc couldn't exec default.cfg execing config.cfg couldn't exec autoexec.cfg Client using an automatically assigned port Client opened a socket on address 0.0.0.0:0 Client opened a socket on address [0:0:0:0:0:0:0:0]:0 Linked against SDL version 1.2.12 Using SDL library version 1.2.14 GL_VENDOR: NVIDIA Corporation GL_RENDERER: GeForce 6150SE nForce 430/PCI/SSE2/3DNOW! GL_VERSION: 2.1.2 NVIDIA 270.41.06 vid.support.arb_multisample 1 vid.mode.samples 0 vid.support.gl20shaders 1 Video Mode: fullscreen 640x480x32x0.00hz S_Startup: initializing sound output format: 48000Hz, 16 bit, 2 channels... Wanted audio Specification: Channels : 2 Format : 0x8010 Frequency : 48000 Samples : 2048 Obtained audio specification: Channels : 2 Format : 0x8010 Frequency : 48000 Samples : 1024 Sound format: 48000Hz, 2 channels, 16 bits per sample CDAudio_Init: No CD in player. Can't get initial CD volume CD Audio Initialized If I try -base /opt/steelstorm-episode2/steelstorm says "command not found".

  Read the article

• Oracle Unveils AutoVue Release 20.1

  - by prasenjit.niyogi(at)oracle.com

  We are extremely pleased to announce the availability of Oracle's AutoVue Release 20.1. AutoVue 20.1 is the latest major release of the family of Enterprise Visualization solutions from Oracle. Highlights of the release include: Unparalleled new format support and enhancements for 3D CAD, 2D, CAD, ECAD and PDF documents New capabilities that support end-to-end design to manufacture processes in the Electronics & High Tech space, that allow manufacturing engineers to perform accurate manufacturability reviews through better support for variants, overlays and polarity Significant printing enhancements, such as printing of markup notes; support for Excel file print settings; and print in grayscale; which serve to optimize paper-based business processes Powerful integration enablement capabilities to extend visualization into existing enterprise architectures and systems; including AutoVue Hotspots that enable visual navigation and action by linking visual data to structured enterprise data, and new AutoVue Document Print Services (DPS) to enrich enterprise applications with format and platform agnostic printing of any document type Improvements for cost-effective AutoVue deployment and administration, including support for virtualization Release 20.1 Webcast - Attend the webcast on April 13th at 12:00 pm EST to discover what is new and exciting in the latest release. Encourage your customers, prospects, and partners to attend. Title: Oracle Unveils AutoVue Release 20.1 Channel: Oracle AutoVue Channel Register Here: http://www.brighttalk.com/webcast/26282 To discover more about the latest release, and to find out what the customers and partners are saying about the value of this offering, check out the: What's New is AutoVue 20.1 Datasheet You can also learn all about the latest format support here AutoVue 20.1 Format Support Sheet We look forward to seeing you at the webcast. If you have any questions feel free to ask, and we will answer it in this forum. Enjoy AutoVue 20.1!

  Read the article

• How can I set up FakeRAID/SoftRAID using mdadm without losing data?

  - by Danatela

  There is RAID0 of 2 drives connected through Silicon Image 3132 SATA SoftRAID controller. Under Windows it was partitioned as one dynamic GPT-disk having 4 TB NTFS volume. There is a lot of music and movies on the drive. I'm trying to get him to be seen under Ubuntu as a single disk, not as 2 by 2 terabytes. I tried to read it through dmraid, had no success, it is not displayed in /dev/mapper. Also tried to configure the kernel, but did not find anything suspicious, the driver for my controller was on. There is also a driver from the manufacturer, but it is only available for RHEL and SLES. Here it's reported that SoftRAID is supported by the kernel, but apparently not completely. If I thrust drives in the AMD controller, built into the motherboard, the drive is seen as a single, but the data is lost. I know about mdadm that it is able to ditch all the information on the disks. So, is it possible to somehow create an array without actually recording information on used drives and to make the system correctly identify sections on it later? Information about the array: /dev/sdf - Disk 0 /dev/sdg - Disk 1 Array type: Stripe Block Size: 64KB Also, a device /dev/md1 is created using command mknod /dev/md1 b 9 1

  Read the article

• SD Card only mounted after a reboot

  - by hattenn

  I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

  Read the article

• It could be worse....

  - by Darryl Gove

  As "guest" pointed out, in my file I/O test I didn't open the file with O_SYNC, so in fact the time was spent in OS code rather than in disk I/O. It's a straightforward change to add O_SYNC to the open() call, but it's also useful to reduce the iteration count - since the cost per write is much higher: ... #define SIZE 1024 void test_write() { starttime(); int file = open("./test.dat",O_WRONLY|O_CREAT|O_SYNC,S_IWGRP|S_IWOTH|S_IWUSR); ... Running this gave the following results: Time per iteration 0.000065606310 MB/s Time per iteration 2.709711563906 MB/s Time per iteration 0.178590114758 MB/s Yup, disk I/O is way slower than the original I/O calls. However, it's not a very fair comparison since disks get written in large blocks of data and we're deliberately sending a single byte. A fairer result would be to look at the I/O operations per second; which is about 65 - pretty much what I'd expect for this system. It's also interesting to examine at the profiles for the two cases. When the write() was trapping into the OS the profile indicated that all the time was being spent in system. When the data was being written to disk, the time got attributed to sleep. This gives us an indication how to interpret profiles from apps doing I/O. It's the sleep time that indicates disk activity.

  Read the article

• Languages like Tcl that have configurable syntax?

  - by boost

  I'm looking for a language that will let me do what I could do with Clipper years ago, and which I can do with Tcl, namely add functionality in a way other than just adding functions. For example in Clipper/(x)Harbour there are commands #command, #translate, #xcommand and #xtranslate that allow things like this: #xcommand REPEAT; => DO WHILE .T. #xcommand UNTIL <cond>; => IF (<cond>); ;EXIT; ;ENDIF; ;ENDDO LOCAL n := 1 REPEAT n := n + 1 UNTIL n > 100 Similarly, in Tcl I'm doing proc process_range {_for_ project _from_ dat1 _to_ dat2 _by_ slice} { set fromDate [clock scan $dat1] set toDate [clock scan $dat2] if {$slice eq "day"} then {set incrementor [expr 24 * 60]} if {$slice eq "hour"} then {set incrementor 60} set method DateRange puts "Scanning from [clock format $fromDate -format "%c"] to [clock format $toDate -format "%c"] by $slice" for {set dateCursor $fromDate} {$dateCursor <= $toDate} {set dateCursor [clock add $dateCursor $incrementor minutes]} { # ... } } process_range for "client" from "2013-10-18 00:00" to "2013-10-20 23:59" by day Are there any other languages that permit this kind of, almost COBOL-esque, syntax modification? If you're wondering why I'm asking, it's for setting up stuff so that others with a not-as-geeky-as-I-am skillset can declare processing tasks.

  Read the article

• Install on Acer Aspire 4752

  - by user216962

  I am at my wits end with this computer. I bought and Acer Aspire 4752 with a fully loaded version of Windows 7 on it. I prefer Ubuntu so I began to install 14.04 from USB. Got the error: [Errno 5] Input/output error This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment. So I tried a different USB stick, same error. Tried different versions of Ubuntu, got the same error. I've used startup disk creator and Unetbootin to make start USB boot devices. I can boot with the USB drive and run Ubuntu that way. I even checked the hard drive using the tools in Ubuntu. Everything was fine, except it said the hard drive was hot. I tried a different hard drive. Got same error above. I ran a test with mem86, everything was fine. No matter what I do, using the USB gives me the Errno5 error. I then switched to using DVDs. Now I keep getting an uncompression error when installing Ubuntu 14.04 or 12.04. I can't figure out for the life of me why I get nothing but errors. Can anyone help?

  Read the article

• Help with dual booting Windows 8.1 Professional and Ubuntu 13.10

  - by user1292548

  I recently installed a clean version of Windows 8.1 Professional on my Lenovo Y500 (with Samsung 256GB 840 Pro SSD). I have Windows all set up and running normally. I am trying to dual boot Windows 8.1 and Ubuntu 13.10, but the installation procedure don't allow me to either "Install alongside..." or shows my SSD partitions correctly when I chose the "Something Else" option. I have created a 25GB partition of free space in the Windows disk manager, but on the installation screen on Ubuntu, it shows the whole drive as a free space. I have tried installing with a burned .ISO disk and a bootable USB, the results are the same for both. Windows Disk Management screen: http://imageshack.us/a/img855/9504/59zu.jpg The Ubuntu installation screen: http://imageshack.us/a/img62/2712/9g6i.jpg I've ran into this problem before when trying to dual boot Ubuntu and Windows 7 Professional a month ago. But I gave up and never resolved the issue. --EDIT-- I tried what Eero Aaltonen suggested, and this is my result: ubuntu@ubuntu:~$ sudo parted /dev/sda print Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table? Yes/No? yes Model: ATA Samsung SSD 840 (scsi) Disk /dev/sda: 256GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags ubuntu@ubuntu:~$

  Read the article

< Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >