Search Results

Search found 8886 results on 356 pages for 'dns hosting'.

Page 174/356 | < Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >

• DNSHost.exe trojan found, now after fix, no one can print

  - by Matt Dawdy

  What started today as an inability to get to the internet (but people could get in just fine), morphed to we realized that the DNS Server wasn't working, then we figured out that we had a trojan called DNSHost.exe (spybot.rl I think), and we disabled its service entry and deleted the offending file and all registry keys told to use by the Trend Micro site. Now, we can get on the internet, but the printer being served by this machine (called server2) cannot be printed to from any client machine on the network. We get the error "The RPC Server is unavailable". I'm assuming that this is related to the DNS issue we had earlier, as we were able to print just fine until this fun happiness started this morning. Anyone have any solid suggestions? Windows Server 2003 R2 SP2, and the client machine are all Windows XP SP2.

  Read the article

• Mixed network, Linux-to-Linux hostname resolution issues

  - by James

  At work we have an WinSBS domain at the heart of our network, which is all Windows PCs. The domain controller is acting as a DNS for these computers. I have recently added some personal use Linux machines to the network, without joining them to the domain. I have set up Samba with "wins server" pointing to the domain controller, which lets the Windows boxes resolve the Linux hostnames just fine. I also have resolvconf set up with the domain controller as a nameserver and the local domain as a searched domain, which lets the Linux boxes resolve the Windows hostnames just fine. However, the Linux boxes will not resolve other Linux hostnames at all. Given that I don't have control over the DNS server (I am not the network admin) and that at least one of the Linux boxes is not an always-on machine and is likely to change its LAN IP frequently (via DHCP), what service am I missing to make their hostnames visible to each other?

  Read the article

• Internet connection very slow after Linksys configuration

  - by NLV

  Hello We have this network setup Server1 - DHCP server, Domain Controller, AD Lease line for Internet connection From lease line to Linksys router (we dont use wireless though) From linksys to Netgear (24 port Switch) and vonage (VoIP) Netgear to all our machines We configured Linsys with the static IP and DNS server addresses our ISP gave and we have routed it correctly. All our work machines are configured with Get IP automatically DNS server addresses our ISP gave The problem is that none of the sites are getting opened promptly. It is taking around 5 minutes to load google.com. But we are able to ping all the sites. What could be the problem?

  Read the article

• php server settings for restrict post queries

  - by Korjavin Ivan

  I have php script on hosting, which receive big data with ajax/post. Just now, after some works on hosting, I see that script is broken. I checked with curl: file temp1: user_avatar=&user_baner=&user_sig=.... 237 chars total, and curl -H "X-Requested-With: XMLHttpRequest" -X POST --data @temp1 'http://host/mypage.php' works perfect. But with file temp2: name=%D0%9C%D0%B5%D0%B1%%B5%D0%BB%D1%8C%D0%A4%%B0%D0%B1%D1%80%D0%B8%D0%BA%D1%8A&user_payed=0000-00-00&...positions%5B5231%5D=on total chars: 65563 curl -H "X-Requested-With: XMLHttpRequest" -X POST --data @temp2 'http://host/mypage.php' curl return nothing. Looks like a problem with apache/php/php.ini or something like that. I check .htaccess php_value post_max_size 20M Which other parameters I should check? Is it possible that %BO encode kill php/apache? Or total number of parameters (about 2800) ?

  Read the article

• Netdom Join Failed To Complete Successfully

  - by BubbleMonster

  I have two servers on VMWare. One is a standard install of Server 2008 r2 and the other is Server 2008 core. Server 2008's IP is: 192.168.186.135 and computer name is: SERVER01. This is a domain controller and has DNS installed along with Active Directory. The domain is called: contoso.com Server 2008 Core's IP is: 192.168.186.137 and computer name is: SERVER02 They can both ping each other, but when I try running the following: netdom join SERVER02 /domain:contoso.com Results: The specified domain either does not exist or could not be contacted. The command failed to complete successfully. I'm thinking it might be a DNS issue? I'm new to servers and I am teaching myself. Any help would be appreciated. Thanks in advance.

  Read the article

• OpenBSD in a virtual box as a firewall

  - by Ali

  Is there any merit in installing a virtual machine with OpenBSD and pf (or any other simple and secure OS + iptable) on a mac laptop and routing all the traffic through that machine? I read a similar set up for corporate laptops running windows (I thing I read this in BSD magazine). They claim that Windows machines are too hard to secure and if you are taking them to the wild (public wireless, hotels, ...) you'd better but a secure OS in between! If you think this is a good idea, how you route all the traffic on a mac through the virtual machine and prevent any application or service to go directly? I am not sure if just setting the gateway will do that, what about DNS? you don't want anybody to fool you with DNS cache poisoning or similar attacks either.

  Read the article

• Urgent SSH Local Port Redirection

  - by Salina Odelva

  Hi, everyone. I have a shell account but the admin has restricted ssh access to the server. The server is listening on 0.0.0.0:22 but the firewall blocks any incoming attempts to this port. He says he is doing maintenance but I don't believe him and I need to backup my stuff with ssh. My question is that: Is it possible to do this: Me (Wan IP) <- Hosting Server (tcp/8080) redirects to Hosting Server (tcp/22) I don't want to involve my own linux machine in this and I can only make use of ssh.. Thanks!!

  Read the article

• FCGI & recompiling python code without restarting apache.

  - by Zayatzz

  Hello At one hosting company, they used to run python projects with fcgi. They had set it up so that when i changed django.fcgi file, which put django & my project on pythonpath, my project code was instantly recompiled. Because of that a friend set up hosting for our shared project in his server using fastcgi. It has been set up and the python scripts execute as they should, but what we do not know is, how to set it up so that my project would be recompiled when my setup file has been changed. Alan

  Read the article

• Configuring Mail Relay

  - by ServerChecker

  I'm running Ubuntu Server 9.10 with Postfix and Webmin. I have created virtual hosts for 3 domains following this serverfault.com answer. But the mail isn't relaying out to the world. I have 3 domains tied into my DNS in webmin, as well as inside DNS clicked Mail Server and followed that instruction using this article on the web. The domains and the web servers work just fine. I also have FTP working just fine. So, the remaining problem I have is mail. Can't forward mail out to a Gmail account for some reason. Note I'm just trying to do the "easy version" of Postfix config and if your answer is in Webmin-ease, that would help me. However, I can edit a text file if you suggest.

  Read the article

• Cannot access Network Shares on Windows Server 2008 running VisualSVN Server

  - by mwillmott

  I have installed VisualSVN server on Windows Server 2008. The server is part of a domain but not the domain controller, it is just a data server and now an SVN server. VisualSVN uses port 80 and can only be access from inside the network (i do i by going to the dns name of the server). However, ever since i have installed this, other computers on the network can no longer access the shared folders on the server EXCEPT the domain controller which has no problems accessing the shares. I am stumped, i am guessing it is something to do with Apache running and not using host-headers (or whatever the Apache equivalent may be) but just being bound to the servers DNS name or IP. Any suggestions?

  Read the article

• help setting up an IPSEC vpn from my linux box

  - by robthewolf

  I have an office with a router and a remote server (Linux - Ubuntu 10.10). Both locations need to connect to a data supplier through a VPN. The VPN is an IPSEC gateway. I was able to configure my Linksys rv42 router to create a VPN connection successfully and now I need to do the same for Linux server. I have been messing around with this for too long. First I tried OpenVPN, but that is SSL and not IPSEC. Then I tried Shrew. I think I have the settings correct but I haven't been able to create the connection. It maybe that I have to use something else like a direct IPSEC config or something like that. If someone knows of a way to turn the following settings that I have been given below into a working IPSEC VPN connection I would be very grateful. Here are the settings I was given that must be used to connect to my supplier: Local destination network: 192.168.4.0/24 Local destination hosts: 192.168.4.100 Remote destination network: 192.167.40.0/24 Remote destination hosts: 192.168.40.27 VPN peering point: xxx.xxx.xxx.xxx Then they have given me the following details: IPSEC/ISAKMP Phase 1 Parameters: Authentication method: pre shared secret Diffie Hellman group: group 2 Encryption Algorithm: 3DES Lifetime in seconds:28800 Phase 2 parameters: IPSEC security: ESP Encryption algortims: 3DES Authentication algorithms: MD5 lifetime in seconds: 28800 pfs: disabled Here are the settings from my attempt to use shrew: n:version:2 n:network-ike-port:500 n:network-mtu-size:1380 n:client-addr-auto:0 n:network-frag-size:540 n:network-dpd-enable:1 n:network-notify-enable:1 n:client-banner-enable:1 n:client-dns-used:1 b:auth-mutual-psk:YjJzN2QzdDhyN2EyZDNpNG42ZzQ= n:phase1-dhgroup:2 n:phase1-keylen:0 n:phase1-life-secs:28800 n:phase1-life-kbytes:0 n:vendor-chkpt-enable:0 n:phase2-keylen:0 n:phase2-pfsgroup:-1 n:phase2-life-secs:28800 n:phase2-life-kbytes:0 n:policy-nailed:0 n:policy-list-auto:1 n:client-dns-auto:1 n:network-natt-port:4500 n:network-natt-rate:15 s:client-dns-addr:0.0.0.0 s:client-dns-suffix: s:network-host:xxx.xxx.xxx.xxx s:client-auto-mode:pull s:client-iface:virtual s:client-ip-addr:192.168.4.0 s:client-ip-mask:255.255.255.0 s:network-natt-mode:enable s:network-frag-mode:disable s:auth-method:mutual-psk s:ident-client-type:address s:ident-client-data:192.168.4.0 s:ident-server-type:address s:ident-server-data:192.168.40.0 s:phase1-exchange:aggressive s:phase1-cipher:3des s:phase1-hash:md5 s:phase2-transform:3des s:phase2-hmac:md5 s:ipcomp-transform:disabled Finally here is the debug output from the shrew log: 10/12/22 17:22:18 ii : ipc client process thread begin ... 10/12/22 17:22:18 < A : peer config add message 10/12/22 17:22:18 DB : peer added ( obj count = 1 ) 10/12/22 17:22:18 ii : local address 217.xxx.xxx.xxx selected for peer 10/12/22 17:22:18 DB : tunnel added ( obj count = 1 ) 10/12/22 17:22:18 < A : proposal config message 10/12/22 17:22:18 < A : proposal config message 10/12/22 17:22:18 < A : client config message 10/12/22 17:22:18 < A : local id '192.168.4.0' message 10/12/22 17:22:18 < A : remote id '192.168.40.0' message 10/12/22 17:22:18 < A : preshared key message 10/12/22 17:22:18 < A : peer tunnel enable message 10/12/22 17:22:18 DB : new phase1 ( ISAKMP initiator ) 10/12/22 17:22:18 DB : exchange type is aggressive 10/12/22 17:22:18 DB : 217.xxx.xxx.xxx:500 <- 206.xxx.xxx.xxx:500 10/12/22 17:22:18 DB : c1a8b31ac860995d:0000000000000000 10/12/22 17:22:18 DB : phase1 added ( obj count = 1 ) 10/12/22 17:22:18 : security association payload 10/12/22 17:22:18 : - proposal #1 payload 10/12/22 17:22:18 : -- transform #1 payload 10/12/22 17:22:18 : key exchange payload 10/12/22 17:22:18 : nonce payload 10/12/22 17:22:18 : identification payload 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v00 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v01 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v02 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v03 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( rfc ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports DPDv1 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is SHREW SOFT compatible 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is NETSCREEN compatible 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is SIDEWINDER compatible 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is CISCO UNITY compatible 10/12/22 17:22:18 = : cookies c1a8b31ac860995d:0000000000000000 10/12/22 17:22:18 = : message 00000000 10/12/22 17:22:18 - : send IKE packet 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 ( 484 bytes ) 10/12/22 17:22:18 DB : phase1 resend event scheduled ( ref count = 2 ) 10/12/22 17:22:18 ii : opened tap device tap0 10/12/22 17:22:28 - : resend 1 phase1 packet(s) 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 10/12/22 17:22:38 - : resend 1 phase1 packet(s) 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 10/12/22 17:22:48 - : resend 1 phase1 packet(s) 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 10/12/22 17:22:58 ii : resend limit exceeded for phase1 exchange 10/12/22 17:22:58 ii : phase1 removal before expire time 10/12/22 17:22:58 DB : phase1 deleted ( obj count = 0 ) 10/12/22 17:22:58 ii : closed tap device tap0 10/12/22 17:22:58 DB : tunnel stats event canceled ( ref count = 1 ) 10/12/22 17:22:58 DB : removing tunnel config references 10/12/22 17:22:58 DB : removing tunnel phase2 references 10/12/22 17:22:58 DB : removing tunnel phase1 references 10/12/22 17:22:58 DB : tunnel deleted ( obj count = 0 ) 10/12/22 17:22:58 DB : removing all peer tunnel refrences 10/12/22 17:22:58 DB : peer deleted ( obj count = 0 ) 10/12/22 17:22:58 ii : ipc client process thread exit ...

  Read the article

• unable to join domain using virtualbox

  - by FreshPrinceOfSO

  I'm in the process of setting up a VM environment for a MS certification exam (70-462). Following the training kit's instructions, I've set up a domain controller (DC) and two members (SQL-A, SQL-B) thus far. I can't figure out why I can't join the domain. DC IPv4 Address . . . : 10.10.10.10(Preferred) Subnet Mask. . . . : 255.0.0.0 DNS Servers. . . . : ::1 127.0.0.1 SQL-A IPv4 Address . . . : 10.10.10.20(Preferred) Subnet Mask. . . . : 255.0.0.0 DNS Servers. . . . : 10.10.10.10 SQL-B IPv4 Address . . . : 10.10.10.30(Preferred) Subnet Mask. . . . : 255.0.0.0 DNS Servers. . . . : 10.10.10.10 I've read how to do networking between virtual machines in virtualbox and the documentation. After trying various network adapter configurations, I can't get them to communicate in order to have the two members join the domain. When I ping from .30 to .10, I get: ping 10.10.10.10 Pinging 10.10.10.10 with 32 bytes of data: Reply from 10.10.10.20: Destination host unreachable. Reply from 10.10.10.20: Destination host unreachable. Reply from 10.10.10.20: Destination host unreachable. Reply from 10.10.10.20: Destination host unreachable. Trying to join the domain: netdom join SQL-A /domain:contso.com The specified domain either does not exist or could not be contacted. The command failed to complete successfully. Within VirtualBox, I've tried the following combinations for network adapter: Attached to - Promiscuous Mode ------------------------------- NAT Bridged Adapter - Deny Bridged Adapter - Allow VMs Bridged Adapter - Allow All Internal Network - Deny Internal Network - Allow VMs Internal Network - Allow All Host-only Adapter - Deny Host-only Adapter - Allow VMs Host-only Adapter - Allow All Edit ipconfig /all of DC ipconfig /all of SQL-A

  Read the article

• Single Exchange 2007 server - two AD domains

  - by TheCleaner

  CURRENT: single domain, single Exchange 2007 NEW: two domains, single Exchange 2007 Can this be done? Details: Current setup is a single W2k3 domain with a single Exchange 2007 server. We are merging with another company that currently hosts their email with their ISP via POP3. We'd like to start hosting their email on our Exchange server using their existing domain SMTP addresses. They don't have an AD domain at all at the moment. Recommendations? Can I do this with a trust between the 2 domains? Requirements: They can't have multiple SMTP addresses on both domains...such as I've seen with articles pointing to "hosting multiple domains". I want companyA to have the same account settings they've always had...companyB to have the same SMTP address they've had and not an additional one on the current companyA Exchange domain. They should be able to collaborate (calendar, contacts, GALs) but should still be distinguishable based on which company they "work for". Please help...thanks!

  Read the article

• Virtualmin Configuration

  - by Allen

  I am trying to get Virtualmin setup and have reached a point where my noobish sysadmin skills aren't getting the job done. This is the message I get now when I try and refresh the configuration of Virtualmin. BIND DNS server is installed, and the system is configured to use it. However, the default master DNS server XXXXXX is not a fully qualified domain name. Sendmail is only accepting SMTP connections on the following ports : 127.0.0.1 port smtp. Email from other systems on the Internet will not be accepted. This can be changed in the Sendmail Mail Server module. Please advise what I need to do to get Sendmail configured properly. Thanks!

  Read the article

• Configuring CentOS for Heavy-ish Traffic

  - by Jonathan Sampson

  New sysadmin here, managing a CentOS server. This past week has been one of the most exciting weeks of my career, and full of learning all sorts of new things. Today I have another task though, and that is to make sure our server can handle more than what our old shared-hosting was capable of. We were originally limited to 200 concurrent connections on our GoDaddy shared-hosting. Eventually we out-grew this (usually during campaigns/marketing events) and moved on to a Virtual Dedicated Server. I'm assuming the number of connections would be handled by Apache. What configurations should I be mindful of in order to allow more traffic in?

  Read the article

• Virtualization deployment for datacenter

  - by bogha

  Hi, my company is going to deploy an IT Infrastructure on a virtual platform, can you please help me with the following: 1- which one do you recommend, Cisco Unified computing system ( cisco + emc + vmware )or HP Blades( virtualization solution + HP Storage )? 2- i Need to install a DNS Server, Web server, cpanel for managing hosting packages and Microsoft layer of product for usingg in the corporate infrastructur ( active directory, Local DNS, Exchange server, DHCP, Global catalog ) what is the minimum requirments for these servers ( in terms of CPU and Memory ) . 3- what is the best way to implement a redundant solution in a virtual environment. thank you

  Read the article

• Plesk 9 VPS - Doesn't reply to NameServer requests (nslookup, etc)

  - by Ben

  Hi, I'm trying to troubleshoot a problem with a new VPS i'm setting up. The VPS is running Plesk 9 on a CentOS 5 system. Everything works fine, except it doesn't serve dns requests. If I try something like nslookup [somedomain.com] the.ser.ver.ip to test a DNS query, i get the following error ;; connection timed out; no servers could be reached I can't telnet to it on port 42 either.. I'm guessing something is blocking the requests.. firewall maybe? the plesk firewall module is installed and the nameservers entry is green. Any other way I can check what's blocking it on the server? Any help/tip greatly appreciated. Note: http works, i can telnet to the server on port 80 and i can also ping the server Thanks

  Read the article

• What is the meaning of these BIND log messages?

  - by javano

  Please clarify for me the meaning of the following BIND messages in syslog, these are from a DNS resolver. Whilst I think I understand them, I don't know what all four mean, so I think it's best if someone will clarify for me: 1. Oct 14 18:36:34 resolver1 named[14958]: lame server resolving 'arrivatn.co.uk' (in 'arrivatn.co.uk'?): 212.103.224.56#53 2. Oct 14 18:36:36 resolver1 named[14958]: unexpected RCODE (SERVFAIL) resolving '148.128.183.212.in-addr.arpa/PTR/IN': 212.183.136.42#53 4. Oct 14 18:38:49 resolver1 named[14958]: unexpected RCODE (REFUSED) resolving 'internal-server.ournetwork.com/AAAA/IN': auth.dns.server.ip#53 3. Oct 14 18:39:05 resolver1 named[14958]: client 89.187.127.110#42034: query (cache) 'image.sinajs.cn/A/IN' denied Thank you.

  Read the article

• unusual webpage access problem

  - by user28163

  This is one of the weirdest problems I've ever seen and I'm out of ideas. I cannot access a couple of websites from my home pc (for 3-4 days now), or at least they go really really slow ~700b/s I can access these same websites fine from my laptop from same IP address. - The websites originate from different countries and are huge popular sites. - I have tried both my PC's network cards. - I have reformatted my PC. - I have reset my router to factory settings. - I have created virtual computers on my PC, and from inside those I cannot access the webpages. - I have flushed my dns. - I tried specifying my dns server addresses to 8.8.8.8 and 8.8.4.4. I can only access the webpages using my PC, if I first connect to an outside VPN. Again, these sites work fine on the 2 other pcs in this house (same ISP and internet connection). help plz :)

  Read the article

• error while adding web service to server in website panel

  - by sam

  I got following error while creating website for user in website panel.I am not able to create any hosting space in server's hosting plan it is showing 0 mb space. Stack Trace: [SoapException: System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.UriFormatException: Invalid URI: The Authority/Host could not be parsed. at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind) at System.Uri..ctor(String uriString) at Microsoft.Web.Services3.WebServicesClientProtocol.set_Url(String value) at WebsitePanel.Server.Client.ServerProxyConfigurator.Configure(WebServicesClientProtocol proxy) at WebsitePanel.EnterpriseServer.ServiceProviderProxy.ServerInit(WebServicesClientProtocol proxy, ServerProxyConfigurator cnfg, String serverUrl, String serverPassword) at WebsitePanel.EnterpriseServer.ServiceProviderProxy.ServerInit(WebServicesClientProtocol proxy, ServerProxyConfigurator cnfg, Int32 serverId) at WebsitePanel.EnterpriseServer.ServiceProviderProxy.Init(WebServicesClientProtocol proxy, Int32 serviceId) at WebsitePanel.EnterpriseServer.WebAppGalleryController.InitFeedsByServiceId(Int32 UserId, Int32 serviceId) at WebsitePanel.EnterpriseServer.esWebApplicationGallery.GetGalleryApplicationsByServiceId(Int32 serviceId) --- End of inner exception stack trace ---] System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1485877 System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +221 WebsitePanel.EnterpriseServer.esWebApplicationGallery.GetGalleryApplicationsByServiceId(Int32 serviceId) +68 WebsitePanel.Portal.WebAppGalleryHelpers.GetGalleryApplicationsByServiceId(Int32 serviceId) +31 can anybody help me in this.

  Read the article

• what config files need to be transferred while migrating apache vhosts from old suse server to new suse server?

  - by jarus

  I have an old server with suse on it and its hosting numerous website under same IP , now i am trying to migrate the websites and all the contents of the old suse server to a new server with open suse 12.1 , i have transferred "/srv/www/vhosts" "/etc/apache2/vhosts.d" "/etc/apache2//httpd.conf" "/etc/apache2/listen.conf" "/etc/apache2/default-server.conf" i have transferred all the database files also . i am trying to replace the old server with the new server , i tried changing the ip address with the old server's ip address but its not working. what files do i need to transfer and what do i need to do to get the new server hosting the websites in place of the old server , please, any help will be greatly appreciated.

  Read the article

• SSH to an ubuntu machine using avahi

  - by tensaiji

  I have an ubuntu box that I connect to using avahi. Connecting to that box works fine for all services (I regularly use AFP, SSH and SMB on it) but I've noticed that whenever I connect to it from a mac using SSH (and using the ".local" dns name provided by avahi - eg. "ssh .local") SSH tries to connect using ipv6, which for some reason times out (after two minutes) then it tries ipv4 which connects immediately. I'd like to avoid this timeout, as it's really annoying for me and other users - if SSH tried ipv4 first or if ssh over ipv6 worked then that would solve the problem. But so far I've been unable to get either to work (the best I've managed is to specify the "-4" option to SSH to stop it from trying ipv6 at all). I'm using Ubuntu 10.04. Any solution has to be on the server (not the client) as there are multiple clients connecting. A possible complication might be that my LAN is set up to allow link-local ipv6 addresses only, but I have other servers (using Mac OS) that I can SSH into using ipv6) I suspect that the problem could be solved by either preventing avahi from broadcasting the ipv6 address, or by enabling ssh over ipv6, but so far as I can tell avahi is already configured not to broadcast the ipv6 address and sshd is configured to allow ipv6 connections! Here's my /etc/avahi/avahi-daemon.conf (I don't think I've changed anything from the ubuntu defaults) [server] #host-name=foo #domain-name=local #browse-domains=0pointer.de, zeroconf.org use-ipv4=yes use-ipv6=no #allow-interfaces=eth0 #deny-interfaces=eth1 #check-response-ttl=no #use-iff-running=no #enable-dbus=yes #disallow-other-stacks=no #allow-point-to-point=no [wide-area] enable-wide-area=yes [publish] #disable-publishing=no #disable-user-service-publishing=no #add-service-cookie=no #publish-addresses=yes #publish-hinfo=yes #publish-workstation=yes #publish-domain=yes #publish-dns-servers=192.168.50.1, 192.168.50.2 #publish-resolv-conf-dns-servers=yes #publish-aaaa-on-ipv4=yes #publish-a-on-ipv6=no [reflector] #enable-reflector=no #reflect-ipv=no [rlimits] #rlimit-as= rlimit-core=0 rlimit-data=4194304 rlimit-fsize=0 rlimit-nofile=300 rlimit-stack=4194304 rlimit-nproc=3 and here's my sshd_config (mainly updated to only allow pub/private keys): # What ports, IPs and protocols we listen for Port 22 # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel INFO # Authentication: LoginGraceTime 180 PermitRootLogin no StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords PasswordAuthentication no AllowGroups sshusers # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding yes X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server UsePAM yes Does anyone have any ideas that I can try, or has experienced anything similar?

  Read the article

• How to make an ISO copy of Linux-filesystem and user files of VPS Debian based?

  - by moogeek

  Hello! I have a Debian-Based VPS on some hosting. I want to migrate from it and i need to make a full copy of all Linux-filesystem (and installed packages) + all home directory with website files. And then pack/convert it to ISO image so that to use it on cloud hostings like Amazon. The problem is that i have only ssh root access. Hosting support can't do that for me. Another part of the question - is it possible to enlarge the Linux-filesystem by not re-installing it and using the free space of home directory? Is it possible to do? I guess it is possible with rsync or something like that. Will my Mysql databes copy together with all other data? Thanks in advance!

  Read the article

• How to make an ISO copy of Linux-filesystem and user files of VPS Debian based?

  - by moogeek

  Hello! I have a Debian-Based VPS on some hosting. I want to migrate from it and i need to make a full copy of all Linux-filesystem (and installed packages) + all home directory with website files. And then pack/convert it to ISO image so that to use it on cloud hostings like Amazon. The problem is that i have only ssh root access. Hosting support can't do that for me. Another part of the question - is it possible to enlarge the Linux-filesystem by not re-installing it and using the free space of home directory? Is it possible to do? I guess it is possible with rsync or something like that. Will my Mysql databes copy together with all other data? Thanks in advance!

  Read the article

• Apache Alias subfolder and starting with dot

  - by MauricioOtta

  I have a multi purpose server running ArchLinux that currently serves multiple virtual hosts from /var/www/domains/EXAMPLE.COM/html /var/www/domains/EXAMPLE2.COM/html I deploy those websites (mostly using Kohana framework) using a Jenkins job by checking out the project, removes the .git folder and ssh-copy the tar.gz to /var/www/domains/ on the server and untars it. Since I don't want to have to re-install phpMyAdmin after each deploy, I decided to use an alias. I would like the alias to be something like /.tools/phpMyAdmin/ so I could have more "tools" later if I wanted to. I have tried just changing the default httpd-phpmyadmin.conf that was installed by following the official WIKI: https://wiki.archlinux.org/index.php/Phpmyadmin Alias /.tools/phpMyAdmin/ "/usr/share/webapps/phpMyAdmin" <Directory "/usr/share/webapps/phpMyAdmin"> AllowOverride All Options FollowSymlinks Order allow,deny Allow from all php_admin_value open_basedir "/var/www/:/tmp/:/usr/share/webapps/:/etc/webapps:/usr/share/pear/" </Directory> Changing only that, doesn't seem to work with my current setup on the server, and apache forwards the request to the framework which 404s (as there's no route to handle /.tools/phpAdmin). I have Mass Virtual hosting enable and setup like this: # # Use name-based virtual hosting. # NameVirtualHost *:8000 # get the server name from the Host: header UseCanonicalName On # splittable logs LogFormat "%{Host}i %h %l %u %t \"%r\" %s %b" vcommon CustomLog logs/access_log vcommon <Directory /var/www/domains> # ExecCGI is needed here because we can't force # CGI execution in the way that ScriptAlias does Options FollowSymLinks ExecCGI AllowOverride All Order allow,deny Allow from all </Directory> RewriteEngine On # a ServerName derived from a Host: header may be any case at all RewriteMap lowercase int:tolower ## deal with normal documents first: # allow Alias /icons/ to work - repeat for other aliases RewriteCond %{REQUEST_URI} !^/icons/ # allow CGIs to work RewriteCond %{REQUEST_URI} !^/cgi-bin/ # do the magic RewriteCond %{SERVER_NAME} ^(www\.|)(.*) RewriteRule ^/(.*)$ /var/www/domains/${lowercase:%2}/html/$1 ## and now deal with CGIs - we have to force a MIME type RewriteCond %{REQUEST_URI} ^/cgi-bin/ RewriteRule ^/(.*)$ /var/www/domains/${lowercase:%{SERVER_NAME}}/cgi-bin/$1 [T=application/x-httpd-cgi] There is also nginx running on this server on port 80 as a reverse proxy for Apache: location ~ \.php$ { proxy_pass http://127.0.0.1:8000; } Everything else was setup by following the official WIKI so I don't think those would cause trouble. Do I need to have the alias for phpMyAdmin setup along the mass virtual hosting or can it be in a separate include file for that alias to work?

  Read the article

< Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >