split dns - Page 174 - Developer IT

Is it OK to have a diferent hostname to fqdn?

- by Cameron Ball

I have a server with fqdn git.mydomain.com (this is in DNS) but I don't really want the machine to have git as its hostname. Right now I have the hostname in /etc/hostname set as (for example): mycustomhostname And in /etc/hosts I have 1.2.3.4 git.mydomain.com mycustomhostname (Where 1.2.3.4 is my server's IP) I've read that the first component of the FQDN should always be the unqualified hostname, so is what I'm doing bad? If so, what is the correct way to do what I want?

Read the article

What is the BRU Server Disaster Recovery Procedure?

- by Jonskichov

How do I go about performing a full, bare metal disaster recovery from BRU Server backups? I have backed up the entire C:\ (including Windows, Program Files etc) of a test machine (using Open File Manager) and want to restore this to a new server. What is the procedure I need to go through to restore to a clean server using my backup? How does this work with various services such as DHCP, DNS, Active Directory, SQL Server, Windows Registry etc? Thanks in advance.

Read the article

When using the “Remote Server Administration Tools” on Windows 7 (or Vista), is there a way to make

- by Corey

When using the “Remote Server Administration Tools” on Windows 7 (or Vista), is there a way to make the tools (such as DHCP or DNS) remember servers that I work with on a regular basis?

Read the article

WCF with No security

- by james.ingham

Hi all, I've got a WCF service setup which I can consume and use as intendid... but only on the same machine. I'm looking to get this working over multiple computers and I'm not fussed about the security. However when I set (client side) the security to = none, I get a InvalidOperationException: The service certificate is not provided for target 'http://xxx.xxx.xxx.xxx:8731/Design_Time_Addresses/WcfServiceLibrary/ManagementService/'. Specify a service certificate in ClientCredentials. So I'm left with: <security mode="Message"> <message clientCredentialType="None" negotiateServiceCredential="false" algorithmSuite="Default" /> </security> But this gives me another InvalidOperationException: The service certificate is not provided for target 'http://xxx.xxx.xxx.xxx:8731/Design_Time_Addresses/WcfServiceLibrary/ManagementService/'. Specify a service certificate in ClientCredentials. Why would I have to provide a certificate if security was turned off? Server app config: <system.serviceModel> <services> <service name="Server.WcfServiceLibrary.CheckoutService" behaviorConfiguration="Server.WcfServiceLibrary.CheckoutServiceBehavior"> <host> <baseAddresses> <add baseAddress = "http://xxx:8731/Design_Time_Addresses/WcfServiceLibrary/CheckoutService/" /> </baseAddresses> </host> <endpoint address ="" binding="wsDualHttpBinding" contract="Server.WcfServiceLibrary.ICheckoutService"> <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> </service> <service name="Server.WcfServiceLibrary.ManagementService" behaviorConfiguration="Server.WcfServiceLibrary.ManagementServiceBehavior"> <host> <baseAddresses> <add baseAddress = "http://xxx:8731/Design_Time_Addresses/WcfServiceLibrary/ManagementService/" /> </baseAddresses> </host> <endpoint address ="" binding="wsDualHttpBinding" contract="Server.WcfServiceLibrary.IManagementService"> <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> </service> </services> <behaviors> <serviceBehaviors> <behavior name="Server.WcfServiceLibrary.CheckoutServiceBehavior"> <serviceMetadata httpGetEnabled="True"/> <serviceDebug includeExceptionDetailInFaults="False" /> <serviceThrottling maxConcurrentCalls="100" maxConcurrentSessions="50" maxConcurrentInstances="50" /> </behavior> <behavior name="Server.WcfServiceLibrary.ManagementServiceBehavior"> <serviceMetadata httpGetEnabled="True"/> <serviceDebug includeExceptionDetailInFaults="False" /> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> Client app config: <system.serviceModel> <bindings> <wsDualHttpBinding> <binding name="WSDualHttpBinding_IManagementService" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:00:10" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" /> <security mode="Message"> <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" /> </security> </binding> </wsDualHttpBinding> </bindings> <client> <endpoint address="http://xxx:8731/Design_Time_Addresses/WcfServiceLibrary/ManagementService/" binding="wsDualHttpBinding" bindingConfiguration="WSDualHttpBinding_IManagementService" contract="ServiceReference.IManagementService" name="WSDualHttpBinding_IManagementService"> <identity> <dns value="localhost" /> </identity> </endpoint> </client> </system.serviceModel> Thanks

Read the article

How to use CLEAR USB internet connection in Ubuntu (host) and WindowsXP (guest) using VirtualBox

- by bithacker

I'm trying to use CLEAR Motorola WiMax USB in Ubuntu as there is no support for linux as yet. I've installed windowsxp as guest in ubuntu and the version I'm using is 3.2.2. USB is connecting fine in WindowsXP but I can't use internet in Ubuntu. Can you please tell me how to do it. Here is the configuration that could help you guys. Thanks in advance. I'm using Two Network Adapters. Network Adapter 1: PCnet-FAST III (NAT) Adapter 2: PCnet-FAST III (Host-only adapter, 'vboxnet0') ipconfig [on Guest windowsXP] Windows IP Configuration Ethernet adapter Local Area Connection: PCnet-FAST III (NAT) Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 10.0.2.15 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.0.2.2 Ethernet adapter Local Area Connection 3: PCnet-FAST III (Host-only adapter, 'vboxnet0') Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.56.101 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : CLEAR Motorola USB IP Address. . . . . . . . . . . . : 10.168.242.33 Subnet Mask . . . . . . . . . . . : 255.255.192.0 Default Gateway . . . . . . . . . : 10.168.192.2 IFCONFIG [on Host Ubuntu] (Ethernet) eth0 Link encap:Ethernet HWaddr 00:14:22:b9:9d:76 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 (Wireless) Link encap:Ethernet HWaddr 00:13:ce:f0:9b:0d inet6 addr: fe80::213:ceff:fef0:9b0d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:5 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:84 (84.0 B) Interrupt:17 Base address:0xe000 Memory:dfcff000-dfcfffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2292 errors:0 dropped:0 overruns:0 frame:0 TX packets:2292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:171952 (171.9 KB) TX bytes:171952 (171.9 KB) vboxnet0 Link encap:Ethernet HWaddr 0a:00:27:00:00:00 inet addr:192.168.56.1 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:137 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:21174 (21.1 KB)

Read the article

(C++) Linking with namespaces causes duplicate symbol error

- by user577072

Hello. For the past few days, I have been trying to figure out how to link the files for a CLI gaming project I have been working on. There are two halves of the project, the Client and the Server code. The client needs two libraries I've made. The first is a general purpose game board. This is split between GameEngine.h and GameEngine.cpp. The header file looks something like this namespace gfdGaming { // struct sqr_size { // Index x; // Index y; // }; typedef struct { Index x, y; } sqr_size; const sqr_size sPos = {1, 1}; sqr_size sqr(Index x, Index y); sqr_size ePos; class board { // Prototypes / declarations for the class } } And the CPP file is just giving everything content #include "GameEngine.h" type gfdGaming::board::functions The client also has game-specific code (in this case, TicTacToe) split into declarations and definitions (TTT.h, Client.cpp). TTT.h is basically #include "GameEngine.h" #define TTTtar "localhost" #define TTTport 2886 using namespace gfdGaming; void* turnHandler(void*); namespace nsTicTacToe { GFDCON gfd; const char X = 'X'; const char O = 'O'; string MPhostname, mySID; board TTTboard; bool PlayerIsX = true, isMyTurn; char Player = X, Player2 = O; int recon(string* datHolder = NULL, bool force = false); void initMP(bool create = false, string hn = TTTtar); void init(); bool isTie(); int turnPlayer(Index loc, char lSym = Player); bool checkWin(char sym = Player); int mainloop(); int mainloopMP(); }; // NS I made the decision to put this in a namespace to group it instead of a class because there are some parts that would not work well in OOP, and it's much easier to implement later on. I have had trouble linking the client in the past, but this setup seems to work. My server is also split into two files, Server.h and Server.cpp. Server.h contains exactly: #include "../TicTacToe/TTT.h" // Server needs a full copy of TicTacToe code class TTTserv; struct TTTachievement_requirement { Index id; Index loc; bool inUse; }; struct TTTachievement_t { Index id; bool achieved; bool AND, inSameGame; bool inUse; bool (*lHandler)(TTTserv*); char mustBeSym; int mustBePlayer; string name, description; TTTachievement_requirement steps[safearray(8*8)]; }; class achievement_core_t : public GfdOogleTech { public: // May be shifted to private TTTachievement_t list[safearray(8*8)]; public: achievement_core_t(); int insert(string name, string d, bool samegame, bool lAnd, int lSteps[8*8], int mbP=0, char mbS=0); }; struct TTTplayer_t { Index id; bool inUse; string ip, sessionID; char sym; int desc; TTTachievement_t Ding[8*8]; }; struct TTTgame_t { TTTplayer_t Player[safearray(2)]; TTTplayer_t Spectator; achievement_core_t achievement_core; Index cTurn, players; port_t roomLoc; bool inGame, Xused, Oused, newEvent; }; class TTTserv : public gSserver { TTTgame_t Game; TTTplayer_t *cPlayer; port_t conPort; public: achievement_core_t *achiev; thread threads[8]; int parseit(string tDat, string tsIP); Index conCount; int parseit(string tDat, int tlUser, TTTplayer_t** retval); private: int parseProto(string dat, string sIP); int parseProto(string dat, int lUser); int cycleTurn(); void setup(port_t lPort = 0, bool complete = false); public: int newEvent; TTTserv(port_t tlPort = TTTport, bool tcomplete = true); TTTplayer_t* userDC(Index id, Index force = false); int sendToPlayers(string dat, bool asMSG = false); int mainLoop(volatile bool *play); }; // Other void* userHandler(void*); void* handleUser(void*); And in the CPP file I include Server.h and provide main() and the contents of all functions previously declared. Now to the problem at hand I am having issues when linking my server. More specifically, I get a duplicate symbol error for every variable in nsTicTacToe (and possibly in gfdGaming as well). Since I need the TicTacToe functions, I link Client.cpp ( without main() ) when building the server ld: duplicate symbol nsTicTacToe::PlayerIsX in Client.o and Server.o collect2: ld returned 1 exit status Command /Developer/usr/bin/g++-4.2 failed with exit code 1 It stops once a problem is encountered, but if PlayerIsX is removed / changed temporarily than another variable causes an error Essentially, I am looking for any advice on how to better organize my code to hopefully fix these errors. Disclaimers: -I apologize in advance if I provided too much or too little information, as it is my first time posting -I have tried using static and extern to fix these problems, but apparently those are not what I need Thank you to anyone who takes the time to read all of this and respond =)

Read the article

Improving HTML scrapper efficiency with pcntl_fork()

- by Michael Pasqualone

With the help from two previous questions, I now have a working HTML scrapper that feeds product information into a database. What I am now trying to do is improve efficiently by wrapping my brain around with getting my scrapper working with pcntl_fork. If I split my php5-cli script into 10 separate chunks, I improve total runtime by a large factor so I know I am not i/o or cpu bound but just limited by the linear nature of my scraping functions. Using code I've cobbled together from multiple sources, I have this working test: <?php libxml_use_internal_errors(true); ini_set('max_execution_time', 0); ini_set('max_input_time', 0); set_time_limit(0); $hrefArray = array("http://slashdot.org", "http://slashdot.org", "http://slashdot.org", "http://slashdot.org"); function doDomStuff($singleHref,$childPid) { $html = new DOMDocument(); $html->loadHtmlFile($singleHref); $xPath = new DOMXPath($html); $domQuery = '//div[@id="slogan"]/h2'; $domReturn = $xPath->query($domQuery); foreach($domReturn as $return) { $slogan = $return->nodeValue; echo "Child PID #" . $childPid . " says: " . $slogan . "\n"; } } $pids = array(); foreach ($hrefArray as $singleHref) { $pid = pcntl_fork(); if ($pid == -1) { die("Couldn't fork, error!"); } elseif ($pid > 0) { // We are the parent $pids[] = $pid; } else { // We are the child $childPid = posix_getpid(); doDomStuff($singleHref,$childPid); exit(0); } } foreach ($pids as $pid) { pcntl_waitpid($pid, $status); } // Clear the libxml buffer so it doesn't fill up libxml_clear_errors(); Which raises the following questions: 1) Given my hrefArray contains 4 urls - if the array was to contain say 1,000 product urls this code would spawn 1,000 child processes? If so, what is the best way to limit the amount of processes to say 10, and again 1,000 urls as an example split the child work load to 100 products per child (10 x 100). 2) I've learn that pcntl_fork creates a copy of the process and all variables, classes, etc. What I would like to do is replace my hrefArray variable with a DOMDocument query that builds the list of products to scrape, and then feeds them off to child processes to do the processing - so spreading the load across 10 child workers. My brain is telling I need to do something like the following (obviously this doesn't work, so don't run it): <?php libxml_use_internal_errors(true); ini_set('max_execution_time', 0); ini_set('max_input_time', 0); set_time_limit(0); $maxChildWorkers = 10; $html = new DOMDocument(); $html->loadHtmlFile('http://xxxx'); $xPath = new DOMXPath($html); $domQuery = '//div[@id=productDetail]/a'; $domReturn = $xPath->query($domQuery); $hrefsArray[] = $domReturn->getAttribute('href'); function doDomStuff($singleHref) { // Do stuff here with each product } // To figure out: Split href array into $maxChilderWorks # of workArray1, workArray2 ... workArray10. $pids = array(); foreach ($workArray(1,2,3 ... 10) as $singleHref) { $pid = pcntl_fork(); if ($pid == -1) { die("Couldn't fork, error!"); } elseif ($pid > 0) { // We are the parent $pids[] = $pid; } else { // We are the child $childPid = posix_getpid(); doDomStuff($singleHref); exit(0); } } foreach ($pids as $pid) { pcntl_waitpid($pid, $status); } // Clear the libxml buffer so it doesn't fill up libxml_clear_errors(); But what I can't figure out is how to build my hrefsArray[] in the master/parent process only and feed it off to the child process. Currently everything I've tried causes loops in the child processes. I.e. my hrefsArray gets built in the master, and in each subsequent child process. I am sure I am going about this all totally wrong, so would greatly appreciate just general nudge in the right direction.

Read the article

How do i return integers from a string ?

- by kannan.ambadi

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Suppose you are passing a string(for e.g.: “My name has 1 K, 2 A and 3 N”) which may contain integers, letters or special characters. I want to retrieve only numbers from the input string. We can implement it in many ways such as splitting the string into an array or by using TryParse method. I would like to share another idea, that’s by using Regular expressions. All you have to do is, create an instance of Regular Expression with a specified pattern for integer. Regular expression class defines a method called Split, which splits the specified input string based on the pattern provided during object initialization. We can write the code as given below: public static int[] SplitIdSeqenceValues(object combinedArgs) { var _argsSeperator = new Regex(@"\D+", RegexOptions.Compiled); string[] splitedIntegers = _argsSeperator.Split(combinedArgs.ToString()); var args = new int[splitedIntegers.Length]; for (int i = 0; i < splitedIntegers.Length; i++) args[i] = MakeSafe.ToSafeInt32(splitedIntegers[i]); return args; } It would be better, if we set to RegexOptions.Compiled so that the regular expression will have performance boost by faster compilation. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Happy Programming :))

Read the article

Introducing the Earthquake Locator – A Bing Maps Silverlight Application, part 1

- by Bobby Diaz

Update: Live demo and source code now available! The recent wave of earthquakes (no pun intended) being reported in the news got me wondering about the frequency and severity of earthquakes around the world. Since I’ve been doing a lot of Silverlight development lately, I decided to scratch my curiosity with a nice little Bing Maps application that will show the location and relative strength of recent seismic activity. Here is a list of technologies this application will utilize, so be sure to have everything downloaded and installed if you plan on following along. Silverlight 3 WCF RIA Services Bing Maps Silverlight Control * Managed Extensibility Framework (optional) MVVM Light Toolkit (optional) log4net (optional) * If you are new to Bing Maps or have not signed up for a Developer Account, you will need to visit www.bingmapsportal.com to request a Bing Maps key for your application. Getting Started We start out by creating a new Silverlight Application called EarthquakeLocator and specify that we want to automatically create the Web Application Project with RIA Services enabled. I cleaned up the web app by removing the Default.aspx and EarthquakeLocatorTestPage.html. Then I renamed the EarthquakeLocatorTestPage.aspx to Default.aspx and set it as my start page. I also set the development server to use a specific port, as shown below. RIA Services Next, I created a Services folder in the EarthquakeLocator.Web project and added a new Domain Service Class called EarthquakeService.cs. This is the RIA Services Domain Service that will provide earthquake data for our client application. I am not using LINQ to SQL or Entity Framework, so I will use the <empty domain service class> option. We will be pulling data from an external Atom feed, but this example could just as easily pull data from a database or another web service. This is an important distinction to point out because each scenario I just mentioned could potentially use a different Domain Service base class (i.e. LinqToSqlDomainService<TDataContext>). Now we can start adding Query methods to our EarthquakeService that pull data from the USGS web site. Here is the complete code for our service class: using System; using System.Collections.Generic; using System.IO; using System.Linq; using System.ServiceModel.Syndication; using System.Web.DomainServices; using System.Web.Ria; using System.Xml; using log4net; using EarthquakeLocator.Web.Model; namespace EarthquakeLocator.Web.Services { /// <summary> /// Provides earthquake data to client applications. /// </summary> [EnableClientAccess()] public class EarthquakeService : DomainService { private static readonly ILog log = LogManager.GetLogger(typeof(EarthquakeService)); // USGS Data Feeds: http://earthquake.usgs.gov/earthquakes/catalogs/ private const string FeedForPreviousDay = "http://earthquake.usgs.gov/earthquakes/catalogs/1day-M2.5.xml"; private const string FeedForPreviousWeek = "http://earthquake.usgs.gov/earthquakes/catalogs/7day-M2.5.xml"; /// <summary> /// Gets the earthquake data for the previous week. /// </summary> /// <returns>A queryable collection of <see cref="Earthquake"/> objects.</returns> public IQueryable<Earthquake> GetEarthquakes() { var feed = GetFeed(FeedForPreviousWeek); var list = new List<Earthquake>(); if ( feed != null ) { foreach ( var entry in feed.Items ) { var quake = CreateEarthquake(entry); if ( quake != null ) { list.Add(quake); } } } return list.AsQueryable(); } /// <summary> /// Creates an <see cref="Earthquake"/> object for each entry in the Atom feed. /// </summary> /// <param name="entry">The Atom entry.</param> /// <returns></returns> private Earthquake CreateEarthquake(SyndicationItem entry) { Earthquake quake = null; string title = entry.Title.Text; string summary = entry.Summary.Text; string point = GetElementValue<String>(entry, "point"); string depth = GetElementValue<String>(entry, "elev"); string utcTime = null; string localTime = null; string depthDesc = null; double? magnitude = null; double? latitude = null; double? longitude = null; double? depthKm = null; if ( !String.IsNullOrEmpty(title) && title.StartsWith("M") ) { title = title.Substring(2, title.IndexOf(',')-3).Trim(); magnitude = TryParse(title); } if ( !String.IsNullOrEmpty(point) ) { var values = point.Split(' '); if ( values.Length == 2 ) { latitude = TryParse(values[0]); longitude = TryParse(values[1]); } } if ( !String.IsNullOrEmpty(depth) ) { depthKm = TryParse(depth); if ( depthKm != null ) { depthKm = Math.Round((-1 * depthKm.Value) / 100, 2); } } if ( !String.IsNullOrEmpty(summary) ) { summary = summary.Replace("</p>", ""); var values = summary.Split( new string[] { "<p>" }, StringSplitOptions.RemoveEmptyEntries); if ( values.Length == 3 ) { var times = values[1].Split( new string[] { "<br>" }, StringSplitOptions.RemoveEmptyEntries); if ( times.Length > 0 ) { utcTime = times[0]; } if ( times.Length > 1 ) { localTime = times[1]; } depthDesc = values[2]; depthDesc = "Depth: " + depthDesc.Substring(depthDesc.IndexOf(":") + 2); } } if ( latitude != null && longitude != null ) { quake = new Earthquake() { Id = entry.Id, Title = entry.Title.Text, Summary = entry.Summary.Text, Date = entry.LastUpdatedTime.DateTime, Url = entry.Links.Select(l => Path.Combine(l.BaseUri.OriginalString, l.Uri.OriginalString)).FirstOrDefault(), Age = entry.Categories.Where(c => c.Label == "Age") .Select(c => c.Name).FirstOrDefault(), Magnitude = magnitude.GetValueOrDefault(), Latitude = latitude.GetValueOrDefault(), Longitude = longitude.GetValueOrDefault(), DepthInKm = depthKm.GetValueOrDefault(), DepthDesc = depthDesc, UtcTime = utcTime, LocalTime = localTime }; } return quake; } private T GetElementValue<T>(SyndicationItem entry, String name) { var el = entry.ElementExtensions.Where(e => e.OuterName == name).FirstOrDefault(); T value = default(T); if ( el != null ) { value = el.GetObject<T>(); } return value; } private double? TryParse(String value) { double d; if ( Double.TryParse(value, out d) ) { return d; } return null; } /// <summary> /// Gets the feed at the specified URL. /// </summary> /// <param name="url">The URL.</param> /// <returns>A <see cref="SyndicationFeed"/> object.</returns> public static SyndicationFeed GetFeed(String url) { SyndicationFeed feed = null; try { log.Debug("Loading RSS feed: " + url); using ( var reader = XmlReader.Create(url) ) { feed = SyndicationFeed.Load(reader); } } catch ( Exception ex ) { log.Error("Error occurred while loading RSS feed: " + url, ex); } return feed; } } } The only method that will be generated in the client side proxy class, EarthquakeContext, will be the GetEarthquakes() method. The reason being that it is the only public instance method and it returns an IQueryable<Earthquake> collection that can be consumed by the client application. GetEarthquakes() calls the static GetFeed(String) method, which utilizes the built in SyndicationFeed API to load the external data feed. You will need to add a reference to the System.ServiceModel.Web library in order to take advantage of the RSS/Atom reader. The API will also allow you to create your own feeds to serve up in your applications. Model I have also created a Model folder and added a new class, Earthquake.cs. The Earthquake object will hold the various properties returned from the Atom feed. Here is a sample of the code for that class. Notice the [Key] attribute on the Id property, which is required by RIA Services to uniquely identify the entity. using System; using System.Collections.Generic; using System.Linq; using System.Runtime.Serialization; using System.ComponentModel.DataAnnotations; namespace EarthquakeLocator.Web.Model { /// <summary> /// Represents an earthquake occurrence and related information. /// </summary> [DataContract] public class Earthquake { /// <summary> /// Gets or sets the id. /// </summary> /// <value>The id.</value> [Key] [DataMember] public string Id { get; set; } /// <summary> /// Gets or sets the title. /// </summary> /// <value>The title.</value> [DataMember] public string Title { get; set; } /// <summary> /// Gets or sets the summary. /// </summary> /// <value>The summary.</value> [DataMember] public string Summary { get; set; } // additional properties omitted } } View Model The recent trend to use the MVVM pattern for WPF and Silverlight provides a great way to separate the data and behavior logic out of the user interface layer of your client applications. I have chosen to use the MVVM Light Toolkit for the Earthquake Locator, but there are other options out there if you prefer another library. That said, I went ahead and created a ViewModel folder in the Silverlight project and added a EarthquakeViewModel class that derives from ViewModelBase. Here is the code: using System; using System.Collections.ObjectModel; using System.ComponentModel.Composition; using System.ComponentModel.Composition.Hosting; using Microsoft.Maps.MapControl; using GalaSoft.MvvmLight; using EarthquakeLocator.Web.Model; using EarthquakeLocator.Web.Services; namespace EarthquakeLocator.ViewModel { /// <summary> /// Provides data for views displaying earthquake information. /// </summary> public class EarthquakeViewModel : ViewModelBase { [Import] public EarthquakeContext Context; /// <summary> /// Initializes a new instance of the <see cref="EarthquakeViewModel"/> class. /// </summary> public EarthquakeViewModel() { var catalog = new AssemblyCatalog(GetType().Assembly); var container = new CompositionContainer(catalog); container.ComposeParts(this); Initialize(); } /// <summary> /// Initializes a new instance of the <see cref="EarthquakeViewModel"/> class. /// </summary> /// <param name="context">The context.</param> public EarthquakeViewModel(EarthquakeContext context) { Context = context; Initialize(); } private void Initialize() { MapCenter = new Location(20, -170); ZoomLevel = 2; } #region Private Methods private void OnAutoLoadDataChanged() { LoadEarthquakes(); } private void LoadEarthquakes() { var query = Context.GetEarthquakesQuery(); Context.Earthquakes.Clear(); Context.Load(query, (op) => { if ( !op.HasError ) { foreach ( var item in op.Entities ) { Earthquakes.Add(item); } } }, null); } #endregion Private Methods #region Properties private bool autoLoadData; /// <summary> /// Gets or sets a value indicating whether to auto load data. /// </summary> /// <value><c>true</c> if auto loading data; otherwise, <c>false</c>.</value> public bool AutoLoadData { get { return autoLoadData; } set { if ( autoLoadData != value ) { autoLoadData = value; RaisePropertyChanged("AutoLoadData"); OnAutoLoadDataChanged(); } } } private ObservableCollection<Earthquake> earthquakes; /// <summary> /// Gets the collection of earthquakes to display. /// </summary> /// <value>The collection of earthquakes.</value> public ObservableCollection<Earthquake> Earthquakes { get { if ( earthquakes == null ) { earthquakes = new ObservableCollection<Earthquake>(); } return earthquakes; } } private Location mapCenter; /// <summary> /// Gets or sets the map center. /// </summary> /// <value>The map center.</value> public Location MapCenter { get { return mapCenter; } set { if ( mapCenter != value ) { mapCenter = value; RaisePropertyChanged("MapCenter"); } } } private double zoomLevel; /// <summary> /// Gets or sets the zoom level. /// </summary> /// <value>The zoom level.</value> public double ZoomLevel { get { return zoomLevel; } set { if ( zoomLevel != value ) { zoomLevel = value; RaisePropertyChanged("ZoomLevel"); } } } #endregion Properties } } The EarthquakeViewModel class contains all of the properties that will be bound to by the various controls in our views. Be sure to read through the LoadEarthquakes() method, which handles calling the GetEarthquakes() method in our EarthquakeService via the EarthquakeContext proxy, and also transfers the loaded entities into the view model’s Earthquakes collection. Another thing to notice is what’s going on in the default constructor. I chose to use the Managed Extensibility Framework (MEF) for my composition needs, but you can use any dependency injection library or none at all. To allow the EarthquakeContext class to be discoverable by MEF, I added the following partial class so that I could supply the appropriate [Export] attribute: using System; using System.ComponentModel.Composition; namespace EarthquakeLocator.Web.Services { /// <summary> /// The client side proxy for the EarthquakeService class. /// </summary> [Export] public partial class EarthquakeContext { } } One last piece I wanted to point out before moving on to the user interface, I added a client side partial class for the Earthquake entity that contains helper properties that we will bind to later: using System; namespace EarthquakeLocator.Web.Model { /// <summary> /// Represents an earthquake occurrence and related information. /// </summary> public partial class Earthquake { /// <summary> /// Gets the location based on the current Latitude/Longitude. /// </summary> /// <value>The location.</value> public string Location { get { return String.Format("{0},{1}", Latitude, Longitude); } } /// <summary> /// Gets the size based on the Magnitude. /// </summary> /// <value>The size.</value> public double Size { get { return (Magnitude * 3); } } } } View Now the fun part! Usually, I would create a Views folder to place all of my View controls in, but I took the easy way out and added the following XAML code to the default MainPage.xaml file. Be sure to add the bing prefix associating the Microsoft.Maps.MapControl namespace after adding the assembly reference to your project. The MVVM Light Toolkit project templates come with a ViewModelLocator class that you can use via a static resource, but I am instantiating the EarthquakeViewModel directly in my user control. I am setting the AutoLoadData property to true as a way to trigger the LoadEarthquakes() method call. The MapItemsControl found within the <bing:Map> control binds its ItemsSource property to the Earthquakes collection of the view model, and since it is an ObservableCollection<T>, we get the automatic two way data binding via the INotifyCollectionChanged interface. <UserControl x:Class="EarthquakeLocator.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:bing="clr-namespace:Microsoft.Maps.MapControl;assembly=Microsoft.Maps.MapControl" xmlns:vm="clr-namespace:EarthquakeLocator.ViewModel" mc:Ignorable="d" d:DesignWidth="640" d:DesignHeight="480" > <UserControl.Resources> <DataTemplate x:Key="EarthquakeTemplate"> <Ellipse Fill="Red" Stroke="Black" StrokeThickness="1" Width="{Binding Size}" Height="{Binding Size}" bing:MapLayer.Position="{Binding Location}" bing:MapLayer.PositionOrigin="Center"> <ToolTipService.ToolTip> <StackPanel> <TextBlock Text="{Binding Title}" FontSize="14" FontWeight="Bold" /> <TextBlock Text="{Binding UtcTime}" /> <TextBlock Text="{Binding LocalTime}" /> <TextBlock Text="{Binding DepthDesc}" /> </StackPanel> </ToolTipService.ToolTip> </Ellipse> </DataTemplate> </UserControl.Resources> <UserControl.DataContext> <vm:EarthquakeViewModel AutoLoadData="True" /> </UserControl.DataContext> <Grid x:Name="LayoutRoot"> <bing:Map x:Name="map" CredentialsProvider="--Your-Bing-Maps-Key--" Center="{Binding MapCenter, Mode=TwoWay}" ZoomLevel="{Binding ZoomLevel, Mode=TwoWay}"> <bing:MapItemsControl ItemsSource="{Binding Earthquakes}" ItemTemplate="{StaticResource EarthquakeTemplate}" /> </bing:Map> </Grid> </UserControl> The EarthquakeTemplate defines the Ellipse that will represent each earthquake, the Width and Height that are determined by the Magnitude, the Position on the map, and also the tooltip that will appear when we mouse over each data point. Running the application will give us the following result (shown with a tooltip example): That concludes this portion of our show but I plan on implementing additional functionality in later blog posts. Be sure to come back soon to see the next installments in this series. Enjoy! Additional Resources USGS Earthquake Data Feeds Brad Abrams shows how RIA Services and MVVM can work together

Read the article

suspicious crawler activity

- by ithkuil

I'm noticing that I get accesses 66.249.66.198 - - [01/Jul/2011:17:13:46 +0200] "GET /img/clip.incubus.torrent.phtml HTTP/1.1" 404 143 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" 66.249.66.198 - - [01/Jul/2011:17:13:48 +0200] "GET /img/clip.global.deejays.download.phtml HTTP/1.1" 404 143 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" that files don't exist and there is no file on my site that has this content (I hope). Why is googlebot trying out these links? reverse dns and whois state that 66.249.66.198 is really googlebot.

Read the article

Soluto’s New Quick Question Button Makes Family Tech Support Simple

- by Jason Fitzpatrick

Soluto, a computer and boot management tool, now features a Quick Question button that allows the people you help out to easily click a button and send you both a short message and a screenshot of the problem. Any time your friend or family member presses F8, Soluto will take a screenshot of the screen, the Task Manager history, and a note from the user highlighting what issue they’re experiencing, and then email it all to you. After reviewing the email you can easily login to Soluto to remotely manage your friend’s computer and help with the problem. For more information about Soluto you can check out our previous reviews of the service here and here, or just hit up the link below to read more and take Soluto for a test drive. Soluto is a free service (for the first 5 computers), Windows only. Introducing Quick Question [The Soluto Blog] Java is Insecure and Awful, It’s Time to Disable It, and Here’s How What Are the Windows A: and B: Drives Used For? HTG Explains: What is DNS?

Read the article

10gR2 10.2.0.4 Certified with EBS 12 on Windows Itanium x64

- by Steven Chan

Oracle Database 10g Release 2 version 10.2.0.4 is now certified with Oracle E-Business Suite Release 12 (12.0.4 or higher, 12.1.1 or higher) on the Windows Itanium x64 (64-bit) platform. The operating system supported on this platform is Windows Server 2003. This is a 'database-tier only' certification (previously known as a 'split configuration database tier' certification) where the application tier must be on a different fully certified E-Business Suite R12 platform.This 'database-tier only' platform was previously certified with 12.0 and 10.2.0.3 - customers can now apply the 12.1.1 Maintenance Pack to upgrade their application tier to 12.1.1 while running the 10gR2 database on this platform.

Read the article

Are there any language agnostic unit testing frameworks?

- by Bringer128

I have always been skeptical of rewriting working code - porting code is no exception to this. However, with the advent of TDD and automated testing it is much more reasonable to rewrite and refactor code. Does anyone know if there is a TDD tool that can be used for porting old code? Ideally you could do the following: Write up language agnostic unit tests for the old code that pass (or fail if you find bugs!). Run unit tests on your other code base that fail. Write code in your new language that passes the tests without looking at the old code. The alternative would be to split step 1 into "Write up unit tests in language 1" and "Port unit tests to language 2", which significantly increases effort required and is difficult to justify if the old code base is going to stop being maintained after the port (that is, you don't get the benefit of continuous integration on this code base). EDIT: It's worth noting this question on StackOverflow.

Read the article

Setting up a local AI server - easy with Solaris 11

- by Stefan Hinker

Many things are new in Solaris 11, Autoinstall is one of them. If, like me, you've known Jumpstart for the last 2 centuries or so, you'll have to start from scratch. Well, almost, as the concepts are similar, and it's not all that difficult. Just new. I wanted to have an AI server that I could use for demo purposes, on the train if need be. That answers the question of hardware requirements: portable. But let's start at the beginning. First, you need an OS image, of course. In the new world of Solaris 11, it is now called a repository. The original can be downloaded from the Solaris 11 page at Oracle. What you want is the "Oracle Solaris 11 11/11 Repository Image", which comes in two parts that can be combined using cat. MD5 checksums for these (and all other downloads from that page) are available closer to the top of the page. With that, building the repository is quick and simple: # zfs create -o mountpoint=/export/repo rpool/ai/repo # zfs create rpool/ai/repo/s11 # mount -o ro -F hsfs /tmp/sol-11-1111-repo-full.iso /mnt # rsync -aP /mnt/repo /export/repo/s11 # umount /mnt # pkgrepo rebuild -s /export/repo/sol11/repo # zfs snapshot rpool/ai/repo/sol11@fcs # pkgrepo info -s /export/repo/sol11/repo PUBLISHER PACKAGES STATUS UPDATED solaris 4292 online 2012-03-12T20:47:15.378639Z That's all there's to it. Let's make a snapshot, just to be on the safe side. You never know when one will come in handy. To use this repository, you could just add it as a file-based publisher: # pkg set-publisher -g file:///export/repo/sol11/repo solaris In case I'd want to access this repository through a (virtual) network, i'll now quickly activate the repository-service: # svccfg -s application/pkg/server \ setprop pkg/inst_root=/export/repo/sol11/repo # svccfg -s application/pkg/server setprop pkg/readonly=true # svcadm refresh application/pkg/server # svcadm enable application/pkg/server That's all you need - now point your browser to http://localhost/ to view your beautiful repository-server. Step 1 is done. All of this, by the way, is nicely documented in the README file that's contained in the repository image. Of course, we already have updates to the original release. You can find them in MOS in the Oracle Solaris 11 Support Repository Updates (SRU) Index. You can simply add these to your existing repository or create separate repositories for each SRU. The individual SRUs are self-sufficient and incremental - SRU4 includes all updates from SRU2 and SRU3. With ZFS, you can also get both: A full repository with all updates and at the same time incremental ones up to each of the updates: # mount -o ro -F hsfs /tmp/sol-11-1111-sru4-05-incr-repo.iso /mnt # pkgrecv -s /mnt/repo -d /export/repo/sol11/repo '*' # umount /mnt # pkgrepo rebuild -s /export/repo/sol11/repo # zfs snapshot rpool/ai/repo/sol11@sru4 # zfs set snapdir=visible rpool/ai/repo/sol11 # svcadm restart svc:/application/pkg/server:default The normal repository is now updated to SRU4. Thanks to the ZFS snapshots, there is also a valid repository of Solaris 11 11/11 without the update located at /export/repo/sol11/.zfs/snapshot/fcs . If you like, you can also create another repository service for each update, running on a separate port. But now lets continue with the AI server. Just a little bit of reading in the dokumentation makes it clear that we will need to run a DHCP server for this. Since I already have one active (for my SunRay installation) and since it's a good idea to have these kinds of services separate anyway, I decided to create this in a Zone. So, let's create one first: # zfs create -o mountpoint=/export/install rpool/ai/install # zfs create -o mountpoint=/zones rpool/zones # zonecfg -z ai-server zonecfg:ai-server> create create: Using system default template 'SYSdefault' zonecfg:ai-server> set zonepath=/zones/ai-server zonecfg:ai-server> add dataset zonecfg:ai-server:dataset> set name=rpool/ai/install zonecfg:ai-server:dataset> set alias=install zonecfg:ai-server:dataset> end zonecfg:ai-server> commit zonecfg:ai-server> exit # zoneadm -z ai-server install # zoneadm -z ai-server boot ; zlogin -C ai-server Give it a hostname and IP address at first boot, and there's the Zone. For a publisher for Solaris packages, it will be bound to the "System Publisher" from the Global Zone. The /export/install filesystem, of course, is intended to be used by the AI server. Let's configure it now: #zlogin ai-server root@ai-server:~# pkg install install/installadm root@ai-server:~# installadm create-service -n x86-fcs -a i386 \ -s pkg://solaris/install-image/[email protected],5.11-0.175.0.0.0.2.1482 \ -d /export/install/fcs -i 192.168.2.20 -c 3 With that, the core AI server is already done. What happened here? First, I installed the AI server software. IPS makes that nice and easy. If necessary, it'll also pull in the required DHCP-Server and anything else that might be missing. Watch out for that DHCP server software. In Solaris 11, there are two different versions. There's the one you might know from Solaris 10 and earlier, and then there's a new one from ISC. The latter is the one we need for AI. The SMF service names of both are very similar. The "old" one is "svc:/network/dhcp-server:default". The ISC-server comes with several SMF-services. We at least need "svc:/network/dhcp/server:ipv4". The command "installadm create-service" creates the installation-service. It's called "x86-fcs", serves the "i386" architecture and gets its boot image from the repository of the system publisher, using version 5.11,5.11-0.175.0.0.0.2.1482, which is Solaris 11 11/11. (The option "-a i386" in this example is optional, since the installserver itself runs on a x86 machine.) The boot-environment for clients is created in /export/install/fcs and the DHCP-server is configured for 3 IP-addresses starting at 192.168.2.20. This configuration is stored in a very human readable form in /etc/inet/dhcpd4.conf. An AI-service for SPARC systems could be created in the very same way, using "-a sparc" as the architecture option. Now we would be ready to register and install the first client. It would be installed with the default "solaris-large-server" using the publisher "http://pkg.oracle.com/solaris/release" and would query it's configuration interactively at first boot. This makes it very clear that an AI-server is really only a boot-server. The true source of packets to install can be different. Since I don't like these defaults for my demo setup, I did some extra config work for my clients. The configuration of a client is controlled by manifests and profiles. The manifest controls which packets are installed and how the filesystems are layed out. In that, it's very much like the old "rules.ok" file in Jumpstart. Profiles contain additional configuration like root passwords, primary user account, IP addresses, keyboard layout etc. Hence, profiles are very similar to the old sysid.cfg file. The easiest way to get your hands on a manifest is to ask the AI server we just created to give us it's default one. Then modify that to our liking and give it back to the installserver to use: root@ai-server:~# mkdir -p /export/install/configs/manifests root@ai-server:~# cd /export/install/configs/manifests root@ai-server:~# installadm export -n x86-fcs -m orig_default \ -o orig_default.xml root@ai-server:~# cp orig_default.xml s11-fcs.small.local.xml root@ai-server:~# vi s11-fcs.small.local.xml root@ai-server:~# more s11-fcs.small.local.xml <!DOCTYPE auto_install SYSTEM "file:///usr/share/install/ai.dtd.1"> <auto_install> <ai_instance name="S11 Small fcs local"> <target> <logical> <zpool name="rpool" is_root="true"> <filesystem name="export" mountpoint="/export"/> <filesystem name="export/home"/> <be name="solaris"/> </zpool> </logical> </target> <software type="IPS"> <destination> <image>  <facet set="false">facet.locale.*</facet> <facet set="true">facet.locale.de</facet> <facet set="true">facet.locale.de_DE</facet> <facet set="true">facet.locale.en</facet> <facet set="true">facet.locale.en_US</facet> </image> </destination> <source> <publisher name="solaris"> <origin name="http://192.168.2.12/"/> </publisher> </source>  <software_data action="install"> <name>pkg:/[email protected],5.11-0.175.0.0.0.2.0</name> <name>pkg:/group/system/solaris-small-server</name> </software_data> </software> </ai_instance> </auto_install> root@ai-server:~# installadm create-manifest -n x86-fcs -d \ -f ./s11-fcs.small.local.xml root@ai-server:~# installadm list -m -n x86-fcs Manifest Status Criteria -------- ------ -------- S11 Small fcs local Default None orig_default Inactive None The major points in this new manifest are: Install "solaris-small-server" Install a few locales less than the default. I'm not that fluid in French or Japanese... Use my own package service as publisher, running on IP address 192.168.2.12 Install the initial release of Solaris 11: pkg:/[email protected],5.11-0.175.0.0.0.2.0 Using a similar approach, I'll create a default profile interactively and use it as a template for a few customized building blocks, each defining a part of the overall system configuration. The modular approach makes it easy to configure numerous clients later on: root@ai-server:~# mkdir -p /export/install/configs/profiles root@ai-server:~# cd /export/install/configs/profiles root@ai-server:~# sysconfig create-profile -o default.xml root@ai-server:~# cp default.xml general.xml; cp default.xml mars.xml root@ai-server:~# cp default.xml user.xml root@ai-server:~# vi general.xml mars.xml user.xml root@ai-server:~# more general.xml mars.xml user.xml :::::::::::::: general.xml :::::::::::::: <!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1"> <service_bundle type="profile" name="sysconfig"> <service version="1" type="service" name="system/timezone"> <instance enabled="true" name="default"> <property_group type="application" name="timezone"> <propval type="astring" name="localtime" value="Europe/Berlin"/> </property_group> </instance> </service> <service version="1" type="service" name="system/environment"> <instance enabled="true" name="init"> <property_group type="application" name="environment"> <propval type="astring" name="LANG" value="C"/> </property_group> </instance> </service> <service version="1" type="service" name="system/keymap"> <instance enabled="true" name="default"> <property_group type="system" name="keymap"> <propval type="astring" name="layout" value="US-English"/> </property_group> </instance> </service> <service version="1" type="service" name="system/console-login"> <instance enabled="true" name="default"> <property_group type="application" name="ttymon"> <propval type="astring" name="terminal_type" value="vt100"/> </property_group> </instance> </service> <service version="1" type="service" name="network/physical"> <instance enabled="true" name="default"> <property_group type="application" name="netcfg"> <propval type="astring" name="active_ncp" value="DefaultFixed"/> </property_group> </instance> </service> <service version="1" type="service" name="system/name-service/switch"> <property_group type="application" name="config"> <propval type="astring" name="default" value="files"/> <propval type="astring" name="host" value="files dns"/> <propval type="astring" name="printer" value="user files"/> </property_group> <instance enabled="true" name="default"/> </service> <service version="1" type="service" name="system/name-service/cache"> <instance enabled="true" name="default"/> </service> <service version="1" type="service" name="network/dns/client"> <property_group type="application" name="config"> <property type="net_address" name="nameserver"> <net_address_list> <value_node value="192.168.2.1"/> </net_address_list> </property> </property_group> <instance enabled="true" name="default"/> </service> </service_bundle> :::::::::::::: mars.xml :::::::::::::: <!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1"> <service_bundle type="profile" name="sysconfig"> <service version="1" type="service" name="network/install"> <instance enabled="true" name="default"> <property_group type="application" name="install_ipv4_interface"> <propval type="astring" name="address_type" value="static"/> <propval type="net_address_v4" name="static_address" value="192.168.2.100/24"/> <propval type="astring" name="name" value="net0/v4"/> <propval type="net_address_v4" name="default_route" value="192.168.2.1"/> </property_group> <property_group type="application" name="install_ipv6_interface"> <propval type="astring" name="stateful" value="yes"/> <propval type="astring" name="stateless" value="yes"/> <propval type="astring" name="address_type" value="addrconf"/> <propval type="astring" name="name" value="net0/v6"/> </property_group> </instance> </service> <service version="1" type="service" name="system/identity"> <instance enabled="true" name="node"> <property_group type="application" name="config"> <propval type="astring" name="nodename" value="mars"/> </property_group> </instance> </service> </service_bundle> :::::::::::::: user.xml :::::::::::::: <!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1"> <service_bundle type="profile" name="sysconfig"> <service version="1" type="service" name="system/config-user"> <instance enabled="true" name="default"> <property_group type="application" name="root_account"> <propval type="astring" name="login" value="root"/> <propval type="astring" name="password" value="noIWillNotTellYouMyPasswordNotEvenEncrypted"/> <propval type="astring" name="type" value="role"/> </property_group> <property_group type="application" name="user_account"> <propval type="astring" name="login" value="stefan"/> <propval type="astring" name="password" value="noIWillNotTellYouMyPasswordNotEvenEncrypted"/> <propval type="astring" name="type" value="normal"/> <propval type="astring" name="description" value="Stefan Hinker"/> <propval type="count" name="uid" value="12345"/> <propval type="count" name="gid" value="10"/> <propval type="astring" name="shell" value="/usr/bin/bash"/> <propval type="astring" name="roles" value="root"/> <propval type="astring" name="profiles" value="System Administrator"/> <propval type="astring" name="sudoers" value="ALL=(ALL) ALL"/> </property_group> </instance> </service> </service_bundle> root@ai-server:~# installadm create-profile -n x86-fcs -f general.xml root@ai-server:~# installadm create-profile -n x86-fcs -f user.xml root@ai-server:~# installadm create-profile -n x86-fcs -f mars.xml \ -c ipv4=192.168.2.100 root@ai-server:~# installadm list -p Service Name Profile ------------ ------- x86-fcs general.xml mars.xml user.xml root@ai-server:~# installadm list -n x86-fcs -p Profile Criteria ------- -------- general.xml None mars.xml ipv4 = 192.168.2.100 user.xml None Here's the idea behind these files: "general.xml" contains settings valid for all my clients. Stuff like DNS servers, for example, which in my case will always be the same. "user.xml" only contains user definitions. That is, a root password and a primary user.Both of these profiles will be valid for all clients (for now). "mars.xml" defines network settings for an individual client. This profile is associated with an IP-Address. For this to work, I'll have to tweak the DHCP-settings in the next step: root@ai-server:~# installadm create-client -e 08:00:27:AA:3D:B1 -n x86-fcs root@ai-server:~# vi /etc/inet/dhcpd4.conf root@ai-server:~# tail -5 /etc/inet/dhcpd4.conf host 080027AA3DB1 { hardware ethernet 08:00:27:AA:3D:B1; fixed-address 192.168.2.100; filename "01080027AA3DB1"; } This completes the client preparations. I manually added the IP-Address for mars to /etc/inet/dhcpd4.conf. This is needed for the "mars.xml" profile. Disabling arbitrary DHCP-replies will shut up this DHCP server, making my life in a shared environment a lot more peaceful ;-)Now, I of course want this installation to be completely hands-off. For this to work, I'll need to modify the grub boot menu for this client slightly. You can find it in /etc/netboot. "installadm create-client" will create a new boot menu for every client, identified by the client's MAC address. The template for this can be found in a subdirectory with the name of the install service, /etc/netboot/x86-fcs in our case. If you don't want to change this manually for every client, modify that template to your liking instead. root@ai-server:~# cd /etc/netboot root@ai-server:~# cp menu.lst.01080027AA3DB1 menu.lst.01080027AA3DB1.org root@ai-server:~# vi menu.lst.01080027AA3DB1 root@ai-server:~# diff menu.lst.01080027AA3DB1 menu.lst.01080027AA3DB1.org 1,2c1,2 < default=1 < timeout=10 --- > default=0 > timeout=30 root@ai-server:~# more menu.lst.01080027AA3DB1 default=1 timeout=10 min_mem64=0 title Oracle Solaris 11 11/11 Text Installer and command line kernel$ /x86-fcs/platform/i86pc/kernel/$ISADIR/unix -B install_media=htt p://$serverIP:5555//export/install/fcs,install_service=x86-fcs,install_svc_addre ss=$serverIP:5555 module$ /x86-fcs/platform/i86pc/$ISADIR/boot_archive title Oracle Solaris 11 11/11 Automated Install kernel$ /x86-fcs/platform/i86pc/kernel/$ISADIR/unix -B install=true,inst all_media=http://$serverIP:5555//export/install/fcs,install_service=x86-fcs,inst all_svc_address=$serverIP:5555,livemode=text module$ /x86-fcs/platform/i86pc/$ISADIR/boot_archive Now just boot the client off the network using PXE-boot. For my demo purposes, that's a client from VirtualBox, of course. That's all there's to it. And despite the fact that this blog entry is a little longer - that wasn't that hard now, was it?

Read the article

Taking advantage of Windows Azure CDN and Dynamic Pages in ASP.NET - Caching content from hosted services

- by Shawn Cicoria

With the updates to Windows Azure CDN announced this week [1] I wanted to help illustrate the capability with a working sample that will serve up dynamic content from an ASP.NET site hosted in a WebRole. First, to get a good overview of the capability you can read the Overview of the Windows Azure CDN [2] content on MSDN. When you setup the ability to cache content from a hosted service, the requirement is to provide a path to your role’s DNS endpoint that ends in the path “/cdn”. Additionally, you then map CDN to that service. What WAZ CDN does, is allow you to then map that through the CDN to your host. The CDN will then make a request to your host on your client’s behalf. The requirement is still that your client, and any Url’s that are to be serviced through the CDN and this capability have to use the CDN DNS name and not your host – no different than what CDN does for Blog storage. The following 2 URL’s are samples of how the client needs to issue the requests. Windows Azure hosted service URL: http: //myHostedService.cloudapp.net/cdn/music.aspx - for regular “dynamic” content Windows Azure CDN URL: http: //<identifier>.vo.msecnd.net/music.aspx - for CDN “cachable” content. The first URL path’s the request direct to your host into the Azure datacenter. The 2nd URL paths the request through the CDN infrastructure, where CDN will make the determination to request the content on behalf of the client to the Azure datacenter and your host on the /cdn path. The big advantage here is you can apply logic to your content creation. What’s important is emitting the CDN friendly headers that allow CDN to request and re-request only when you designate based upon it’s rules of “staleness” as described in the overview page. With IIS7.5 there is an underlying issue when the Managed Module “OutputCache” is enabled that in order to emit a good header for your content, you’ll need to remove, and in my sample, helps provide CDN friendly headers. You get IIS 7.5 when running under OS Family “2” in your service configuration. By default, and when the OutputCache managed module is loaded, if you use the HttpResponse.CachePolicy to set the Http Headers for “max-age” when the HttpCacheability is “Public”, you will NOT get the “max-age” emitted as part of the “Cache-control:” header. Instead, the OutputCache module will remove “max-age” and just emit “public”. It works ok when Cacheability is set to “private”. To work around the issue and ensure your code as follows emits the full max-age along with the public option, you need to remove as follows: <system.webServer> <modules runAllManagedModulesForAllRequests="true"> <remove name="OutputCache"/> </modules> </system.webServer> Response.Cache.SetCacheability(HttpCacheability.Public); Response.Cache.SetMaxAge(TimeSpan.FromMinutes(rv)); In the attached solution, the way I approached it was to have a VirtualApplication under the root site that has it’s own web.config - this VirtualApplication is the /cdn of the site and when deployed to Azure as a Web Role will surface as a distinct IIS Application – along with a separate AppDomain. The CDN Sample is a simple Web Forms site that the /default landing page contains 3 IFrames to host: 1. Content direct from the host @ http://xxxx.cloudapp.net/cdn 2. Content via the CDN @ http://azxxx.vo.msecnd.net 3. Simple list of recent requests – showing where the request came from. When you run the sample the first time you hit the page, both the Host and the CDN will cause 2 initial requests to hit the host. You won’t see the first requests in the list because of timing – but if you refresh, you’ll see that the list will show that you have 2 requests initially. 1. sourced direct from the Browser to the HOST 2. sourced via the CDN The picture above shows the call-outs of each of those requests – green rows showing requests coming direct to the HOST, yellow showing the CDN request. The IP addresses of the green items are direct from the client, where the CDN is from the CDN data center. As you refresh the page (hit Ctrl+F5 to force a full refresh and avoid “304 – not changed”) you’ll see that the request to the HOST get’s processed direct; but the request to the CDN endpoint is serviced direct from the CDN and doesn’t incur any additional request back to the HOST. The following is the Headers from the CDN response (Status-Line) HTTP/1.1 200 OK Age 13 Cache-Control public, max-age=300 Connection keep-alive Content-Length 6212 Content-Type image/jpeg; charset=utf-8 Date Fri, 11 Mar 2011 20:47:14 GMT Expires Fri, 11 Mar 2011 20:52:01 GMT Last-Modified Fri, 11 Mar 2011 20:47:02 GMT Server Microsoft-IIS/7.5 X-AspNet-Version 4.0.30319 X-Powered-By ASP.NET The following are the Headers from the HOST response (Status-Line) HTTP/1.1 200 OK Cache-Control public, max-age=300 Content-Length 6189 Content-Type image/jpeg; charset=utf-8 Date Fri, 11 Mar 2011 20:47:15 GMT Last-Modified Fri, 11 Mar 2011 20:47:02 GMT Server Microsoft-IIS/7.5 X-AspNet-Version 4.0.30319 X-Powered-By ASP.NET You can see that with the CDN request, the countdown (age) starts for aging the content. The full sample is located here: CDNSampleSite.zip [1] http://blogs.msdn.com/b/windowsazure/archive/2011/03/09/now-available-updated-windows-azure-sdk-and-windows-azure-management-portal.aspx [2] http://msdn.microsoft.com/en-us/library/ff919703.aspx

Read the article

Seven Worlds will collide…. High Availability BI is not such a Distant Sun.

- by Testas

Over the last 5 years I have observed Microsoft persevere with the notion of Self Service BI over a series of conferences as far back as SQLBits V in Newport. The release of SQL Server 2012, improvements in Excel and the integration with SharePoint 2010 is making this a reality. Business users are now empowered to create their own BI reports through a number of different technologies such as PowerPivot, PowerView and Report Builder. This opens up a whole new way of working; improving staff productivity, promoting efficient decision making and delivering timely business reports. There is, however; a serious question to answer. What happens should any of these applications become unavailable? More to the point, how would the business react should key business users be unable to fulfil reporting requests for key management meetings when they require it? While the introduction of self-service BI will provide instant access to the creation of management information reports, it will also cause instant support calls should the access to the data become unavailable. These are questions that are often overlooked when a business evaluates the need for self-service BI. But as I have written in other blog posts, the thirst for information is unquenchable once the business users have access to the data. When they are unable to access the information, you will be the first to know about it and will be expected to have a resolution to the downtime as soon as possible. The world of self-service BI is pushing reporting and analytical databases to the tier 1 application level for some of Coeo’s customers. A level that is traditionally associated with mission critical OLTP environments. There is recognition that by making BI readily available to the business user, provisions also need to be made to ensure that the solution is highly available so that there is minimal disruption to the business. This is where High Availability BI infrastructures provide a solution. As there is a convergence of technologies to support a self-service BI culture, there is also a convergence of technologies that need to be understood in order to provide the high availability architecture required to support the self-service BI infrastructure. While you may not be the individual that implements these components, understanding the concepts behind these components will empower you to have meaningful discussions with the right people should you put this infrastructure in place. There are 7 worlds that you will have to understand to successfully implement a highly available BI infrastructure 1. Server/Virtualised server hardware/software 2. DNS 3. Network Load Balancing 4. Active Directory 5. Kerberos 6. SharePoint 7. SQL Server I have found myself over the last 6 months reaching out to knowledge that I learnt years ago when I studied for the Windows 2000 and 2003 (MCSE) Microsoft Certified System Engineer. (To the point that I am resuming my studies for the Windows Server 2008 equivalent to be up to date with newer technologies) This knowledge has proved very useful in the numerous engagements I have undertaken since being at Coeo, particularly when dealing with High Availability Infrastructures. As a result of running my session at SQLBits X and SQL Saturday in Dublin, the feedback I have received has been that many individuals desire to understand more of the concepts behind the first 6 “worlds” in the list above. Over the coming weeks, a series of blog posts will be put on this site to help understand the key concepts of each area as it pertains to a High Availability BI Infrastructure. Each post will not provide exhaustive coverage of the topic. For example DNS can be a book in its own right when you consider that there are so many different configuration options with Forward Lookup, Reverse Lookups, AD Integrated Zones and DNA forwarders to name some examples. What I want to do is share the pertinent points as it pertains to the BI infrastructure that you build so that you are equipped with the knowledge to have the right discussion when planning this infrastructure. Next, we will focus on the server infrastructure that will be required to support the High Availability BI Infrastructure, from both a physical box and virtualised perspective. Thanks Chris

Read the article

CQRS – Questions and Concerns

- by Dylan Smith

I’ve been doing a lot of learning on CQRS and Event Sourcing over the last little while and I have a number of questions that I haven’t been able to answer. 1. What is the benefit of CQRS when compared to a typical DDD architecture that uses Event Sourcing and properly captures intent and behavior via verb-based commands? (other than Scalability) 2. When using CQRS what do you do with complex query-based logic? I’m going to elaborate on #1 in this blog post and I’ll do a follow-up post on #2. I watched through Greg Young’s video on the business benefits of CQRS + Event Sourcing and first let me say that I thought it was an excellent presentation that really drives home a lot of the benefits to this approach to architecture (I watched it twice in a row I enjoyed it so much!). But it didn’t answer some of my questions fully (I wish I had been there to ask these of Greg in person!). So let me pick apart some of the points he makes and how they relate to my first question above. I’m completely sold on the idea of event sourcing and have a clear understanding of the benefits that it brings to the table, so I’m not going to question that. But you can use event sourcing without going to a CQRS architecture, so my main question is around the benefits of CQRS + Event Sourcing vs Event Sourcing + Typical DDD architecture Architecture with Event Sourcing + Commands on Left, CQRS on Right Greg talks about how the stereotypical architecture doesn’t support DDD, but is that only because his diagram shows DTO’s coming up from the client. If we use the same diagram but allow the client to send commands doesn’t that remove a lot of the arguments that Greg makes against the stereotypical architecture? We can now introduce verbs into the system. We can capture intent now (storing it still requires event sourcing, but you can implement event sourcing without doing CQRS) We can create a rich domain model (as opposed to an anemic domain model) Scalability is obviously a benefit that CQRS brings to the table, but like Greg says, very few of the systems we create truly need significant scalability Greg talks about the ability to scale your development efforts. He says CQRS allows you to split the system into 3 parts (Client, Domain/Commands, Reads) and assign 3 teams of developers to work on them in parallel; letting you scale your development efforts by 3x with nearly linear gains. But in the stereotypical architecture don’t you already have 2 separate modules that you can split your dev efforts between: The client that sends commands/queries and receives DTO’s, and the Domain which accepts commands/queries, and generates events/DTO’s. If this is true it’s not really a 3x scaling you achieve with CQRS but merely a 1.5x scaling which while great doesn’t sound nearly as dramatic (“I can do it with 10 devs in 12 months – let me hire 5 more and we can have it done in 8 months”). Making the Query side “stupid simple” such that you can assign junior developers (or even outsource it) sounds like a valid benefit, but I have some concerns over what you do with complex query-based logic/behavior. I’m going to go into more detail on this in a follow-up blog post shortly. He also seemed to focus on how “stupid-simple” it is doing queries against the de-normalized data store, but I imagine there is still significant complexity in the event handlers that interpret the events and apply them to the de-normalized tables. It sounds like Greg suggests that because we’re doing CQRS that allows us to apply Event Sourcing when we otherwise wouldn’t be able to (~33:30 in the video). I don’t believe this is true. I don’t see why you wouldn’t be able to apply Event Sourcing without separating out the Commands and Queries. The queries would just operate against the domain model instead of the database. But you’d still get the benefits of Event Sourcing. Without CQRS the queries would only be able to operate against the current state rather than the event history, but even in CQRS the domain behaviors can only operate against the current state and I don’t see that being a big limiting factor. If some query needs to operate against something that is not captured by the current state you would just have to update the domain model to capture that information (no different than if that statement were made about a Command under CQRS). Some of the benefits I do see being applicable are that your domain model might end up being simpler/smaller since it only needs to represent the state needed to process commands and not worry about the reads (like the Deactivate Inventory Item and associated comment example that Greg provides). And also commands that can be handled in a Transaction Script style manner by the command handler simply generating events and not touching the domain model. It also makes it easier for your senior developers to focus on the command behavior and ignore the queries, which is usually going to be a better use of their time. And of course scalability. If anybody out there has any thoughts on this and can help educate me further, please either leave a comment or feel free to get in touch with me via email:

Read the article

Create Chemistry Equations and Diagrams in Word

- by Matthew Guay

Microsoft Word is a great tool for formatting text, but what if you want to insert a chemistry formula or diagram? Thanks to a new free add-in for Word, you can now insert high-quality chemistry formulas and diagrams directly from the Ribbon in Word. Microsoft’s new Education Labs has recently released the new Chemistry Add-in for Word 2007 and 2010. This free download adds support for entering and editing chemistry symbols, diagrams, and formulas using the standard XML based Chemical Markup Language. You can convert any chemical name, such as benzene, or formula, such as H2O, into a chemical diagram, standard name, or formula. Whether you’re a professional chemist, just taking chemistry in school, or simply curious about the makeup of Citric Acid, this add-in is an exciting way to bring chemistry to your computer. This add-in works great on Word 2007 and 2010, including the 64 bit version of Word 2010. Please note that the current version is still in beta, so only run it if you are comfortable running beta products. Getting Started Download the Chemistry add-in from Microsoft Education Labs (link below), and unzip the file. Then, run the ChemistryAddinforWordBeta2.Setup.msi. It may inform you that you need to install the Visual Studio Tools for Office 3.0. Simply click Yes to download these tools. This will open the download in your default browser. Simply click run, or save and then run it when it is downloaded. Now, click next to install the Visual Studio Tools for Office as usual. When this is finished, run the ChemistryAddinforWordBeta2.Setup.msi again. This time, you can easily install it with the default options. Once it’s finished installing, open Word to try out the Chemistry Add-in. You will be asked if you want to install this customization, so click Install to enable it. Now you will have a new Chemistry tab in your Word ribbon. Here’s the ribbon in Word 2010… And here it is in Word 2007. Using the Chemistry Add-in It’s very easy to insert nice chemistry diagrams and formulas in Word with the Chemistry add-in. You can quickly insert a premade diagram from the Chemistry Gallery: Or you can insert a formula from file. Simply click “From File” and choose any Chemical Markup Language (.cml) formatted file to insert the chemical formula. You can also convert any chemical name to it’s chemical form. Simply select the word, right-click, select “Convert to Chemistry Zone” and then click on its name. Now you can see the chemical form in the sidebar if you click the Chemistry Navigator button, and can choose to insert the diagram into the document. Some chemicals will automatically convert to the diagram in the document, while others simply link to it in the sidebar. Either way, you can display exactly what you want. You can also convert a chemical formula directly to it’s chemical diagram. Here we entered H2O and converted it to Chemistry Zone: This directly converted it to the diagram directly in the document. You can click the Edit button on the top, and from there choose to either edit the 2D model of the chemical, or edit the labels. When you click Edit Labels, you may be asked which form you wish to display. Here’s the options for potassium permanganate: You can then edit the names and formulas, and add or remove any you wish. If you choose to edit the chemical in 2D, you can even edit the individual atoms and change the chemical you’re diagramming. This 2D editor has a lot of options, so you can get your chemical diagram to look just like you want. And, if you need any help or want to learn more about the Chemistry add-in and its features, simply click the help button in the Chemistry Ribbon. This will open a Word document containing examples and explanations which can be helpful in mastering all the features of this add-in. All of this works perfectly, whether you’re running it in Word 2007 or 2010, 32 or 64 bit editions. Conclusion Whether you’re using chemistry formulas everyday or simply want to investigate a chemical makeup occasionally, this is a great way to do it with tools you already have on your computer. It will also help make homework a bit easier if you’re struggling with it in high school or college. Links Download the Chemistry Add-in for Word Introducing Chemistry Add-in for Word – MSDN blogs Chemistry Markup Language – Wikipedia Similar Articles Productive Geek Tips Geek Reviews: Using Dia as a Free Replacement for Microsoft VisioEasily Summarize A Word 2007 DocumentCreate a Hyperlink in a Word 2007 Flow Chart and Hide Annoying ScreenTipsHow To Create and Publish Blog Posts in Word 2010 & 2007Using Word 2007 as a Blogging Tool TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Windows 7 Easter Theme YoWindoW, a real time weather screensaver Optimize your computer the Microsoft way Stormpulse provides slick, real time weather data Geek Parents – Did you try Parental Controls in Windows 7? Change DNS servers on the fly with DNS Jumper

Read the article

How could you parallelise a 2D boids simulation

- by Sycren

How could you program a 2D boids simulation in such a way that it could use processing power from different sources (clusters, gpu). In the above example, the non-coloured particles move around until they cluster (yellow) and stop moving. The problem is that all the entities could potentially interact with each other although an entity in the top left is unlikely to interact with one in the bottom right. If the domain was split into different segments, it may speed the whole thing up, But if an entity wanted to cross into another segment there may be problems. At the moment this simulation works with 5000 entities with a good frame rate, I would like to try this with millions if possible. Would it be possible to use quad trees to further optimise this? Any other suggestions?

Read the article

Amazon’s New Kindle Fire Tablet: the How-To Geek Review

- by The Geek

We got our Kindle Fire a few days ago, and since then we’ve been poking, prodding, and generally trying to figure out how to break it. Before you go out and buy your own, check out our in-depth review. Note: This review is extremely long, so we’ve split it up between multiple pages. You can use the navigation links or buttons at the bottom to flip between pages. Amazon’s New Kindle Fire Tablet: the How-To Geek Review HTG Explains: How Hackers Take Over Web Sites with SQL Injection / DDoS Use Your Android Phone to Comparison Shop: 4 Scanner Apps Reviewed

Read the article

12.04 on VirtualBox -No internet access on Guest OS

- by Muzab

I have Windows 7 as my Host OS which has wired Ethernet working. My guest OS on VirtualBox is Ubuntu 12.04. The problem is that I cannot browse. I have: Enabled sharing on Windows; Have used NAT, Bridged Adapter etc ( all possible combinations); With NAT, used PCnet-FAST II (Am79c973) combination. Ubuntu says "connected to wired ethernet1" but I cannot access websites. VirtualBox Host-Only Network in the Network and Sharing center shows that I don't have IPV4 and IPV6 connectivity. Meaning I don't have DHCP configured. Strangely I have DNS address correct in the Ubuntu properties.

Read the article

How can I get ddclient to work with freedns?

- by Rob Fisher

I use the dynamic DNS service at freedns.afraid.org for my 12.04 server. I had assumed that the protocols would be standardised and that ddclient would just work, but apparently not. I get this message in /var/log/syslog: ERROR: Invalid update URL (2): unexpected status () I tried to use the updated version of ddclient from the alternative PPA described in this answer, but then I hit this error: FATAL: Error loading the Perl module Digest::SHA1 needed for freedns update. FATAL: On Debian, the package libdigest-sha1-perl must be installed. And when I try to install that package, I get this: E: Unable to locate package libdigest-sha1-perl Which leads me to this bug report, which apparently has no solution. How to proceed?

Read the article

Using modproxy to get around China's Great Firewall

- by Yau Leung

I'm using WIX service and I like it very much. However, one big problem is that some of my colleagues are in China but their IP is blocked. I'm wondering if modproxy can help me. I would like to setup a clean server (not blocked by the stupid Chinese government). Pointed the DNS cname to it and have modproxy get the page in background and send the page to viewers in China. Will it work? If yes, can anyone post any examples? Thanks a million

Read the article

Improve the Quality of ePub eBooks with Sigil

- by Matthew Guay

Would you like to correct errors in your ePub formatted eBooks, or even split them into chapters and create a Table of Contents? Here’s how you can with the free program Sigil. eBooks are increasingly popular with the rise of eBook readers and reading apps on mobile devices. We recently showed you how to convert a PDF eBook to ePub format, but as you may have noticed, sometimes the converted file had some glitches or odd formatting. Additionally, many of the many free ePub books available online from sources like the Project Guttenberg do not include a table of contents. Sigil is a free application for Windows, OS X, and Linux that lets you edit ePub files, so let’s look at how you can use it to improve your eBooks. Note: Sigil took several moments to open files in our tests, and froze momentarily when we maximized the window. Sigil is currently pre-release software in active development, so we would expect the bugs to be worked out in future versions. As usual, only install if you’re comfortable testing pre-release software. Getting Started Download Sigil (link below), making sure to select the correct version for your computer. Run the installer, and select your preferred setup language when prompted. After a moment the installer will appear; setup as normal. Launch Sigil when it’s finished installing. It opens with a default blank ePub file, so you could actually start writing an eBook from scratch right here. Edit Your ePub eBooks Now you’re ready to edit your ePub books. Click Open and browse to the file you want to edit. Now you can double-click any of the HTML or XHTML files on the left sidebar and edit them just like you would in Word. Or you can choose to view it in Code View and edit the actual HTML directly. The sidebar also gives you access to the other parts of the ePub file, such as Images and CSS styles. If your ePub file has a Table of Contents, you can edit it with Sigil as well. Click Tools in the menu bar, and then select TOC Editor. Strangely there is no way to create a new table of contents, but you can remove entries from existing one. Convert TXT Files to ePub Many free eBooks online, especially older, out of copyright titles, are available in plain text format. One problem with these files is that they usually use hard returns at the end of lines, so they don’t reflow to fill your screen efficiently. Sigil can easily convert these files to the more useful ePub format. Open the text file in Sigil, and it will automatically reflow the text and convert it ePub. As you can see in the screenshot below, the text in the eBook does not have hard line-breaks at the end of each line, and will be much more readable on mobile devices. Note that Sigil may take several moments opening the book, and may even become unresponsive while analyzing it. Now you can edit your eBook, split it into chapters, or just save it as is. Either way, make sure to select Save as to save your book as ePub format. Conclusion As mentioned before, Sigil seems to run slow at times, especially when editing large eBooks. But it’s still a nice solution to edit and extend your ePub eBooks, and even convert plain text eBooks to the nicer ePub format. Now you can make your eBooks work just like you want, and read them on your favorite device! If you feel comfortable editing HTML files, check out our article on how to edit ePub eBooks with your favorite HTML editor. Link Download Sigil from Google Code Download free ePub eBooks from Project Guttenberg Similar Articles Productive Geek Tips Edit ePub eBooks with Your Favorite HTML EditorConvert a PDF eBook to ePub Format for Your iPad, iPhone, or eReaderRead Mobi eBooks on Kindle for PCFriday Fun: Watch HD Video Content with MeevidPreview and Purchase Ebooks with Kindle for PC TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Get Your Team’s World Cup Schedule In Google Calendar Backup Drivers With Driver Magician TubeSort: YouTube Playlist Organizer XPS file format & XPS Viewer Explained Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account

Read the article

Why isn't SSL/TLS built into modern Operating Systems?

- by Channel72

A lot of the basic network protocols that make up the infrastructure of the Internet are built in to most major Operating Systems. Things like TCP, UDP, and DNS are all built into Linux, UNIX and Windows, and are made available to the programmer through low-level system APIs. But when it comes to SSL or TLS, one has to turn to a third-party library such as OpenSSL or Mozilla NSS. SSL is a relatively old protocol, and it's basically an industry standard as ubiquitous as TCP/IP, so why isn't it built into most Operating Systems?

Search Results

Search found 8343 results on 334 pages for 'split dns'.

Page 174/334 | < Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181 | Next Page >

- by Cameron Ball

- by Jonskichov

- by Corey

- by james.ingham

- by bithacker

- by user577072

- by Michael Pasqualone

- by kannan.ambadi

- by Bobby Diaz

- by ithkuil

- by Jason Fitzpatrick

- by Steven Chan

- by Bringer128

- by Stefan Hinker

- by Shawn Cicoria

- by Testas

- by Dylan Smith

- by Matthew Guay

- by Sycren

- by The Geek

- by Muzab

- by Rob Fisher

- by Yau Leung

- by Matthew Guay

- by Channel72

< Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181 | Next Page >