Search Results

Search found 17860 results on 715 pages for 'virtual pc'.

Page 174/715 | < Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >

• How to Enable old networking protocols in Windows 7

  - by Will

  Hi, A few days ago I installed Win7 32bit on a PC and it wouldn't talk to my Lacie NAS which is running WinXP embedded. My other Win7 PC's had no problem. After a bit of searching I found a forum post that told me to enable older networking protocols on the Win7 PC, I think it was win98 protocols or something like that. I had to run a .msc program to do this. It fixed the problem. Now, I have a similar problem on another Win7 PC and for the life of me cannot find that posting and cannot remember what I did! Does anyone know the program or setting to do this? Thanks, Will.

  Read the article

• How can I fix my vista PCs screen resolution and refresh rate

  - by Antony Scott

  I have a media PC running media portal hooked up to my HDTV via HDMI. The TV is a couple of years old now, so only supports 1080i, which is 1920x1080@25Hz. I've got it connected to my PC via a HDMI compatible AV receiver. If I power up the amp (wait for it to boot fully) followed by the TV| and finally the PC, all is well and I get a picture. If I deviate from that sequence, or don't wait for the amp to book up fully, or even switch the amp to another video input (for example, my PS3). The PC sees this and defaults the screen resolution/refresh rate to 1920x1080@60Hz. So, I end up with a blank screen. To fix this I have to use UltraVNC from a PC and change the refresh rate back to 25Hz. So, is there a way to turn off that auto detection, or to manually define what resolution/refresh rates the monitor can do. I'm using the on-board Radeon 3200 video and do not have any of the AMD software installed as it seems to cause problems with video playback. So, I'm looking for a native vista fix, or possible some 3rd party software.

  Read the article

• Help me a routing server on Windows XP

  - by Lu Lu

  I am developing client/server applications and need to test them on Internet environment. However, I only have one PC without connecting the public internet, so I have a plan to simulate a virtual internet environment on my PC. I think I will install the virtual machines for my purpose, but I can install only one machine because of my slowly PC. At the moment, my PC has 2 machines: the host machine (use Windows XP) & the virtual machine (use Windows Server 2003 Ent). Each machine will have 2 network adapter (host-only & internal), and in 2 network adapters, the internal adapter is private on each machine, and host-only adapters are connected together. With Windows 2003, routing server is ok, but I wonder on Windows XP, are there any routing server product? Please help me. Thanks.

  Read the article

• P2V using Acronis True Image Home 10 and Windows 7

  - by Anthony

  I have a full system image using Acronis True Image Home 10 and want to run it as a virtual machine on Windows 7 Professional. I have created a virtual machine but Windows Virtual PC doesn't allow access to a USB external hard disk when booting from the Acronis Recovery CD. I've copied the backup onto the host machine and I can access it via the network using the Acronis boot CD but I'm wondering if there is an easier way? Does any other free Virtual Machine software support USB devices during boot (i.e. I can restore a backup image from the USB hard disk directly)

  Read the article

• Virtualbox - differencing disk based on different differencing disk

  - by Klinki

  I'm trying to create differencing image based on differencing image in VirtualBox 4.2.18. Official documentation says it should be possible: http://www.virtualbox.org/manual/ch05.html#diffimages Basically I want to achieve this drive hierarchy: + immutable image with Debian and all software installed +---- differencing image with specific configuration, autoreset=off, readonly +-------- differencing image with autoreset=on +---- another differencing image for different virtual machine +-------- differencing image with autoreset=on I successfully created differencing image based on differencing image, but I'm not able to connect it to virtual machine :( It always shows error: Failed to open the hard disk .... cannot register hard disk ... because hard disk with UUID ... already exists Here is screenshot of Virtual Media Manager and error dialog Virtual Media Manager Window screenshot Very strange is that the new differencing image (tempdrive.vdi) doesn't have Actual Size 0. I wasn't able to connect it, but still, it has 36KB of data on it... This is very similar to this older question: How to create a chained differencing disk of another differencing disk in Virtual Box? but suggested solution is not working anymore in VirtualBox 4.2.18, so I posted it as a new question. (Limit for posting links and screenshots is quite annoying..)

  Read the article

• 2nd Bootable partition P2V conversion

  - by Vendoran

  I have a dual boot machine (Win7 RC and Win2008) and want to migrate one of the partitions (Win2008) into a Virtual Hard Drive and the be able to use it in VPC or Virtual Server (not Hyper-V). The ways I've seen via Linked Virtual Disks or WinImage take the entire physical drive instead of just the partition. Any ideas? Thanks in Advance, --Aaron

  Read the article

• Exchange 2007 OWA returns blank page with url xxxxx&reason=0

  - by Dayton Brown

  Hi All: I've just run into an issue with my exchange OWA. It returns a blank page with the url string https://www.xxxxxxxx/&reason=0. Nothing in the logs gives me any good reasons. Here's what I've done so far; 1) reinstall Exchange roll-up 7. 2) recreate virtual directories. 3) reboot. (this was mostly a shot in the dark, but what the hell) Exchange via rpc/https is still working great. Anyone run into this before? EDIT Here is the last snippet from the OWASetupLog. doesn't look like anything blew up. [09:45:36] ******************************************* [09:45:36] * UpdateOwa.ps1: 5/27/2009 9:45:36 AM [09:45:40] Updating OWA on server HOMER [09:45:40] Finding OWA install path on the filesystem [09:45:40] Updating OWA to version 8.1.375.2 [09:45:40] Copying files from 'C:\Program Files\Microsoft\Exchange Server\ClientAccess\owa\Current' to 'C:\Program Files\Microsoft\Exchange Server\ClientAccess\owa\8.1.375.2' [09:45:41] Getting all Exchange 2007 OWA virtual directories [09:45:42] Found 1 OWA virtual directories. [09:45:42] Updating OWA virtual directories [09:45:42] Processing virtual directory with metabase path 'IIS://HOMER.DG.LOCAL/W3SVC/1/ROOT/owa'. [09:45:42] Metabase entry 'IIS://HOMER.DG.LOCAL/W3SVC/1/ROOT/owa/8.1.375.2' exists. Removing it. [09:45:42] Creating metabase entry IIS://HOMER.DG.LOCAL/W3SVC/1/ROOT/owa/8.1.375.2. [09:45:42] Configuring metabase entry 'IIS://HOMER.DG.LOCAL/W3SVC/1/ROOT/owa/8.1.375.2'. [09:45:43] Saving changes to 'IIS://HOMER.DG.LOCAL/W3SVC/1/ROOT/owa/8.1.375.2' [09:45:43] Saving changes to 'IIS://HOMER.DG.LOCAL/W3SVC/1/ROOT/owa'

  Read the article

• How can I join two simple home networks together using an ethernet cable?

  - by Ilia Jerebtsov

  I want to join two different home networks together like so: PC A1 PC A2 PC B1 PC B2 \ / \ / Gateway A <----- ethr. cable -----> Gateway B | | ADSL modem A ADSL modem B Both networks are of the basic residential type with identical configuration, with all PCs running Vista/7. The point is to temporarily join two apartments in a building for gaming and file sharing, and the holy grail would be: PCs on network A can access PCs on network B and vice-versa (file shares and gaming). Each network uses its own internet connection. Data between networks shouldn't take a trip through the internet (broadband upload speeds are severely capped) A network's internet access should continue working if the joining cable is disconnected with minimal configuration changes. How closely can this be achieved?

  Read the article

• VMware and Windows Activation

  - by Peter M

  Yesterday I installed Slysoft's Virtual CloneDrive in order to mount an iso for some software installation on my host system (XP Pro SP3) This morning I fired up VMware and made a linked clone of an existing XP vm in order to do some software testing. This is the sort of thing that I do all the time, and the base XP vm that I clone was activated a long long time ago. The surprise today was that the newly cloned vm was no longer activated and XP cited major changes in hardware as the reason. I repeated the test with a full clone of the base system and got the same message. I then started up my base vm and it seemed to be activated, yet another vm (which I fully cloned from the base vm a long time ago) now started reporting that XP was not activated. At this point I guessed that Virtual DriveClone might have been the source of my hardware differences so I uninstalled it and rebooted. After this I made a new linked clone and full clone of the base vm and XP did not complain about not being activated. So I seem to be back to where I was before installing Virtual DriveClone with the exception that that one particular XP vm continues to complain about activation (even though 4 or 5 other XP vm's are fat and happy) Now to my questions: Why would adding Virtual CloneDrive to the host system affect XP activation on the vm's? From their point of view I would have thought that the environment had not changed as I had not enabled any new hard drives in their systems. Or is adding a hard drive to the host system enough to upset XP activation? Since this event, one of my fully cloned vm's is still reporting that XP is not activated even though I have removed Virtual CloneDrive. Is there anyway to convince XP that it is on the same system as yesterday? Or are my only options to do an activation or restore the vm from a previous backup?

  Read the article

• Win7 + SysPrep + CloneZilla = lost settings

  - by oshirowanen

  I've just cloned a PC (Win7 + SysPrep + CloneZilla) and after starting up the new clone, Win7 wants to be reactivated again and the video driver seems to be missing (as in the aero effect has disappeared from the new clone) and the internet connection settings seem to be missing too. All those were set in the master before running SysPrep. Why have these settings been lost? The master PC was had windows 7 activated using a volume license key, and the clone pc is the same make and model as the master computer.

  Read the article

• Which free VNC server works well with Windows 7 and how to advertise it via Bonjour for control by a

  - by GJ

  Hi I need to control a Windows 7 PC via VNC from a Mac in an office LAN. Since the IPs are dynamically assigned, I'd like the PC to appear in my "Places" and in the automatically detected nearby servers in VNC client I'm using -- both of which require the PC to advertise its VNC server via Bonjour (right?). I tried installing ultravnc, which works when I access it directly by IP, but it doesn't seem to advertise itself in the network. Any ideas?

  Read the article

• Ubuntu not installed-Please Remove installation media and close tray and press enter

  - by Ram

  I have downloaded Ubuntu 12.04.1 LTS 32 bit, burned it on DVD and tried to install it on my PC. My PC is running in Windows 7 Ultimate 32 bit mounted on the C: drive. Now I want install Ubuntu along with my Windows 7. When I boot Ubuntu through the CD, It boots and the Ubuntu install windows opens It offers "Try Ubuntu" and "Install Ubuntu". I choose "Install Ubuntu" Then I go on to install Ubuntu with Windows(First Option)-install It shows some blank screen with some lines, and says "Please Remove installation media and close tray and press enter" Then the PC restarts and runs Windows 7 same as before normally. But Ubuntu is not installed. How to solve this problem and install Ubuntu on my PC properly? Note: I am an Android Developer. So I need to install Ubuntu for my Android Development purpose.

  Read the article

• How to share internet connection on Mac os x to Virtualbox vm's using Host-only

  - by redben

  In one line : is the following possible : Airport <- osx bridge - vbox-Host-only - vm's On a mac os x, i have virtual box with a virtual machine. For now i have configured 2 interfaces for my virtual machine eth0 is normal bridge for my vm to acces the internet (when airport is connected) eth1 is set to host-only so i can access my vm from the host when there is no wifi/aiport is down. So basically it's like Adapter 1 when there is Wifi, Adapter 2 when there is not. I'd like to have only one configuration to make it simpler. I thought i could just keep the Host only configuration, and on the host (os x) go to internet sharing and select "share from airport" to vboxnet0 (the vb virtual interface). Only to find out that vboxnet0 dosn't show up in the interfaces list on os x preferences. I know that on a linux host you could install something called bridge-utils and use that to bridge the two insterfaces. Is there any thing like that for Mac ?

  Read the article

• Connecting to a remote mysql server from a windows machine (XP)

  - by Samuel Martin

  I am trying to connect to mysql server which is installed on my home pc from another pc. I allowed all connection in mysql configuration. There's no firewall blocking on the pc I am trying to connect from. I used the command- mysql -h Some.Host.IP -u SomeUser -p SomePassword I am getting- ERROR 2003 (HY000): Can't connect to MySQL server on 'Some.Host.IP' (10060) I can connect through php!! What's the problem? How do I solve it?

  Read the article

• Need help to configure file:default on apache2

  - by turk182

  hi all!! im trying to use xen on ubuntu 8.04 hardy heron, because it is a project that assign to me in my new job, i have already installed xen and im running the virtual machines. according to the guide that they give me, i have to configure de file: default, from apache2 directory, like this: vi /etc/apache2/sites-available/default inside of this file i have to write the next information: NameVirtualHost * VirtualHost * ServerName "www".ejemplo.com ServerAlias ejemplo.com DocumentRoot /var/www/ ProxyRequests Off Proxy * Order deny,allow Allow from all /Proxy ProxyPass /balancer-manager ! ProxyPass / balancer://mycluster/ stickysession=BALANCEID nofailover=On ProxyPassReverse / "http"://http1.ejemplo.com/ ProxyPassReverse / "http"://http2.ejemplo.com/ Proxy balancer://mycluster BalancerMember "http://10.10.2.101:8080 loadfactor=1 BalancerMember "http://10.10.2.102:8080 loadfactor=2 ProxySet lbmethod=byrequests /Proxy Location /balancer-manager SetHandler balancer-manager Order deny,allow Allow from all /Location /VirtualHost in the section of balancermember im using the ip of the virtual machine: virtual machine 1 has ip 10.10.2.101 and virtual machine 2 has ip 10.10.2.102 then i have to install apache2 on each virtual machine and restart apache2 the question is what i hace to do to verify if all of this works allegedly i have to open a browser and write "www.ejemplo.com" and suppost show something thats the reason that im ask for help cause i dont know what to do, im looking for on the web and i cant find nothing related with this... ill appreciatte your help. THXS!!! pd. i closed "www" and "HTTP" in quotes by rules of this sites cause im a new user

  Read the article

• Why is my CPU fan so loud?

  - by tiiquu

  I bought an old PC to use as a second PC. Everything is fine, except for one thing. The CPU fan is terribly loud! I did a lot with PCs but I never did much with CPU fans. If I want to replace it, what do I have to look for? The fan is 8cm long on each side and 11cm diameter. It is just clipped to the cooler. The PC is a P4 3 GHz. I don't want to spend much money, as I only paid 50 euro for the whole PC. I would prefer to buy a fan for 1-3 dollar or something at eBay but I am not quite sure which one I should buy (which fits). Can you advise?

  Read the article

• Postfix tutorial inconsistency

  - by Desmond Hume

  I'm following this tutorial to setup a Postfix/Dovecot mail server with Postfix Admin as a web front end. As regards directory structure for virtual mail users, the author of the tutorial writes: Virtual mail users are those that do not exist as Unix system users. They thus don't use the standard Unix methods of authentication or mail delivery and don't have home directories. That is how we are managing things here: mail users are defined in the database created by Postfix Admin rather than existing as system users. Mail will be kept in subfolders per domain and account under /var/vmail - e.g. [email protected] will have a mail directory of /var/vmail/example.com/me. But when he gives instructions about configuring Postfix Admin, he suggests this to be contained by Postfix Admin's config.inc.php: // Mailboxes // If you want to store the mailboxes per domain set this to 'YES'. // Examples: // YES: /usr/local/virtual/domain.tld/[email protected] // NO: /usr/local/virtual/[email protected] $CONF['domain_path'] = 'NO'; Is there an inconsistency?

  Read the article

• cloning a kvm guest os to a vmdk file

  - by Bond

  I have a production environment where I am having 4 Guest OS running on a Ubuntu server which uses kvm. These OS are in an LVM based setup.I want these Virtual Machines to be in a vmdk format also.Where people would do experiments with these Virtual Machines so this in a vmware environment (or it can be Xen too) would be different from the kvm server.I would not have any control on that other environment so I want to give people vmdk images of these virtual machines. The production Virtual Machines will still keep running on kvm server but the VMs on which experiments would be done would be of type vmdk.(vmdk is a constraint) Here is output of lvscan ACTIVE '/dev/abcd/lvm1' [100.00 GiB] inherit ACTIVE '/dev/abcd/lvm2' [150.00 GiB] inherit ACTIVE '/dev/abcd/lvm3' [50.00 GiB] inherit ACTIVE '/dev/abcd/lvm4' [100.00 GiB] inherit I was reading man page of qemu-img and what I understand is I need to first create a qcow image file which I need to populate and then convert that to a vmdk file. Is that understanding correct? Now suppose /dev/abcd/lvm4 is the virtual machine with which I am going to start this experiment.I can shutdown the production VMs for some time to do this. So is the following way correct to go on server 1 (where kvm is running) qemu-img convert -c -f raw -O vmdk /dev/abcd/lvm4 /backup/lvm4.img or it will affect the lvm4 on kvm server 1. I do not want the VM running on original server to at all loose its any of the content but also have a vmdk file for each of the Guest OS on kvm. Before I proceed with any of the above things on the production machine I just want to make sure that I am doing the correct thing so I asking here.

  Read the article

• Is it possible to provide a wired ethernet connection to external devices with an extra LAN card?

  - by Ben McCormack

  I'm trying to provide a wired ethernet connection (wireless is not an option for this device) to a device (Samsung blu-ray player) without running Cat5 cable all over the home. I have a PC sitting next to this device and the PC is connected to the network via a wireless USB adapter. Is it possible to provide a wired connection from the PC to the wired device using the (currently unused) ethernet port in the back of the computer? Here's how I envision the device getting connected to the internet via my network: Linksys WRT54G v8 Wireless Router | ``--> Windows 7 PC connected via wireless | ``--> Blu-ray player connected via wired connection to the ethernet port on the PC. If so, how is this done? Will I need a crossover cable? What settings will I need to change in Windows 7 so that the device can connect? NOTE: I'm trying to avoid having to buy a wireless bridge and/or hacking a router with an open-source firmware to get this to work. See my previous question for more details.

  Read the article

• Can two users both control a third machine simultaneously using Synergy?

  - by Reason

  I've been a Synergy user for some time now, as I use a PC on the left side of my Mac. My girlfriend and I both have our desks on each side of the other, and we'd like to know if it were possible for the both of us to control the PC in the middle, with our own separate mouse & keyboards. Here's a crude drawing of our setup (1) her pc (2) my pc (3) my mac Currently, 3 is running a synergy server, and 2 is running the client. But like I said, I'm wondering if there's a way for 1 & 3 to both control 2 with their own mouse and keyboard. I'd ~love~ to have it set up where we could go even farther, and have both of our mice & keyboards able to control all 3 computers at the same time, for moments when we need to click or press keys for each other. But that seems a little too much to ask! Any thoughts?

  Read the article

• Test server on a local network with XAMPP

  - by hopscotch1978

  Hi, I'm not very proficient with networks and could use some help. I've got a Win 7 desktop with XAMPP which acts as my local dev machine. I've configured a virtual host on the desktop which I'm able to access fine. If I'm understanding things correctly, the virtual host uses port 80 (<VirtualHost 127.0.0.1:80>). I've just tried to configure a separate Win XP laptop on the local wireless network to connect to the main desktop for testing purposes. I've added the IP address and virtual host name to my Hosts file on the laptop. My virtual host is imaginatively named "virtualhost1". When I type this into my laptop browser, it connects correctly to the main desktop and I get the XAMPP welcome screen. But I can't seem to get to the actual site, just the XAMPP welcome screen. It kind of jumps the browser to http://virtualhost1/xampp/. I think it's a port issue of some sort but I have no idea how to resolve it. I would get the same XAMPP welcome screen on my desktop if I omitted ":80" from the virtual host declaration. On my main desktop, typing "virtualhost1" to the browser address bar gives me the site correctly, not the XAMPP welcome screen. Help would be appreciated. Thank you.

  Read the article

• IIS 7.5 stops serving requests for no apparent reason

  - by Steffen

  We're running a site on 4 virtual Win 2008 R2 64 bit servers. This is the only site on the IIS, and we use Windows Network Load Balancing to share the load between our 4 virtual servers. We've used these virtual servers for approximately a week, and we're starting to see some issues. For no apparent reason the IIS stops serving pages, and doesn't even respond with an error. So upon requesting a page from the server, the browser just waits infinitely (or until it decides to give up clientside) Sometimes an iisreset fixes the issue, other times we have to reboot the entire virtual server. There are no traces in the eventlog of why this happens, and there's no traces in our applications exception log neither. Furthermore this happens even when there's a very small load on the server, so it doesn't seem to be because it's flooded with requests. So frankly I'm at a loss here - I have no idea where to start debugging this issue :-( I'm quite certain we never had these issues on our physical servers, however they were running Win 2003 32bit, so there are quite a few differences between them and the virtual ones. (Which obviously makes it difficult to tell what exactly causes this)

  Read the article

• vmware vmdk disk problem

  - by dmtr

  Hello, I have a vmware esxi 4 server and 2 storage servers (mount as nfs). Between the storage servers (fedora 14) is made drbd cluster (dual primary) and ocfs2 filesystem, also every server has local partition with ext4 filesystem, both are mounted as nfs on esxi server. When i tried to copy a virtual machine (naturally it power off) files from ext4 partition to ocfs2 partition, vmdk total file size is different, but md5sum is the same. on ext4 partition: # ls -la total 28492228 -rw------- 1 root root 42949672960 Jan 14 14:46 disk-flat.vmdk # md5sum disk-flat.vmdk 0eaebe3138beb32f54ea5de6dfe5a987 on ocfs2 partition: # ls -la total 13974660 -rw------- 1 root root 42949672960 Jan 14 16:16 disk-flat.vmdk # md5sum disk-flat.vmdk 0eaebe3138beb32f54ea5de6dfe5a987 When i power on the virtual machine from ocfs2 partition it dosn't work. I have a windows on the virtual machine and it freez?s after windows logo. From ext4 partition the virtual machine is worked. Test with linux (create and install on ext4 partition and copy) the same problem appears. When i create a virtual machine directly from ocfs2 partition, there are no problems. I tried to copy via vSphere client, and i have the same problem. Any suggestions ?

  Read the article

• Windows 8 with LiveID login authenticates as Guest to remote SQl Server

  - by Tim Long

  I have a network where several users are using Office Accounting 2009 in multi-user client/server mode. OA is built on SQL Server. One PC acts as the 'server' and has the SQl Server instance, the others have only the application installed and no SQL instance, all of the apps connect remotely to the SQL instance on the 'server'. I'm using the term 'server' loosely here, it is just a normal workstation that happens to be designated as the server and runs the SQL instance. There is no NT domain, all user accounts are local accounts. The way that OA works in multi-user mode is that each user is required to have a local account with the same username and password on both the client and 'server' PCs. This has been working well, no along comes Windows 8. I use my 'Microsoft Account' aka LiveID to log into Windows 8. Office Accounting runs fine and attempts to connect to the database, but fails, 'you do not have permission to perform this operation'. In the SQL logs, I get this error: 2012-10-28 17:54:01.32 Logon Error: 18456, Severity: 14, State: 11. 2012-10-28 17:54:01.32 Logon Login failed for user 'SERVER\Guest'. Reason: Token-based server access validation failed with an infrastructure SERVER is the hostname of the server. So it seems to be authenticating as 'Guest'?? To verify this, I enabled the Guest account on the 'server' PC and then added Guest as an allowed user within Office Accounting (this simply creates the user in SQL and gives it an appropriate database role). Sure enough, My Windows 8 PC was then able to connect to the database when using Office Accounting. Clearly, having users authenticate as 'Guest' stinks from a security and auditing standpoint. So what I need are some ideas for how to work around this. I've tried switching the Windows 8 PC to a 'local account' and that works too, but requires giving up significant functionality on the Windows 8 PC. What I really need is a way to force the Windows 8 PC to use a specific set of credentials when connecting to the remote SQL instance. Office Accounting takes the logged in username, which is my LiveID and doesn't correspond to any Windows user name. Anyone solved this issue?

  Read the article

• Connecting multiple ColdFusion 10 instances to a single Apache 2.2 server

  - by Adam Cameron

  This is on Windows 7 Home Premium edition. I have got two ColdFusion 10 (updater 2) instances: "cfusion" (the default one), and "scratch". I have got a single instance of Apache 2.2 running. Within Apache, I have set up two virtual hosts, each of which needs to be served by a different ColdFusion instance. Each of the CF instances serves files fine via Tomcat's internal web server. Apache serves vanilla HTML files fine too. So both CF instances, and both virtual hosts separately work OK. I can get wsconfig.exe to connect either one of the CF instances to the Apache server, and serve CF files via Apache & that instance. However I cannot find a way of connecting the second CF instance to Apache as well, so that both CF instances are conected, each serving one of the virtual hosts. WSConfig doesn't seem to understand the notion of "multiple CF instances", and the changes it makes to the httpd.conf (via mod_jk.conf) does not seem to be implemented in such a way as to accommodate multiple CF instances talking to a single Apache instance, or multiple virtual hosts. I freely admit to not being confident enough with how mod_jk (or even really httpd.conf) works to be able to guess if I can change stuff to make it work. If I try to add the second CF instance using WSConfig, I just get a message "the web server is already configured for ColdFusion". Be that as it may... not the instance of ColdFusion I want to connect it to! If I remove the existing connector to whichever instance is already connected, I can then connect the other one no problems. Not that this helps, but it demonstrates that the CF instance can connect to Apache. This all used to be fairly straight fwd under older versions of CF and JRun :-( The only docs I have found are on the "Connect multiple Apache virtual hosts on a web server to a single ColdFusion server" page, but that specifically only deals with a single CF instance. There is no equivalent page for multiple CF instances. I'm kinda hoping I can move some of the mod_jk config into my virtual host entries in httpd-vhosts.conf (this is how it used to work for JRun), but I've no idea what to put where. I think I've covered all the necessary info here? If not, sing out and I'll add more. Thanks. PS: tried to specifically tag this as "ColdFusion-10" as the answer will be different from previous CF versions, but it won't let me cos my rep on this site is too low (odd how it doesn't consider my rep from other S/O sites...). If someone with sufficient rep can add it, that'd be cool: it's probably a valid tag to have. Ta.

  Read the article

< Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >