Search Results

Search found 9928 results on 398 pages for 'facebook authentication'.

Page 175/398 | < Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >

  • Exchange 2010: Send emails via STMP with custom From address to outside the domain

    - by marsze
    The requirement(s): (1) Connect to Exchange via STMP and (2) basic authentication and send emails with a (3) custom From address to (4) recipients outside the domain. I was able to get (1) - (3) working. I created a dedicated receive connector for this task and configured it like this: Permissions: ms-Exch-SMTP-Accept-Any-Recipient (for authenticated users) ms-Exch-SMTP-Accept-Authoritative-Domain-Sender (for authenticated users) ms-Exch-SMTP-Accept-Any-Sender (for authenticated users) Authentication: TLS Basic Authentication (without TLS) Exchange Server Authentication However, I'm still struggeling with (4): I can send with "fake" From addresses to recipients inside the domain. Also, I can send with the original From address to recipients outside the domain. Can you tell me what I'm missing, to configure Exchange to send emails with changed From addresses to recipients outside the domain? (Or is this even possible at all?) Thanks. UPDATE I have to correct myself: it seems to be working after all. There must be some issue with the mailbox I used for testing. It turned out it's working with other external mailboxes. However, I still have no idea what was different there... Anyways, you can take this as a documentation on how to configure Exchange in such a way ;)

    Read the article

  • How to access Virtual machine using powershell script

    - by Sheetal
    I want to access the virtual machine using powershell script. For that I used below script, Enter-PSSession -computername sheetal-VDD -credential compose04.com\abc.xyz1 where, sheetal-VDD is hostname of virtual machine compose04.com is the domain name of virtual machine and abc.xyz1 is the username of virtual machine After entering above command , it asks for password. When the password is entered I get below error, Enter-PSSession : Connecting to remote server failed with the following error message : WinRM cannot process the reques t. The following error occured while using Kerberos authentication: There are currently no logon servers available to s ervice the logon request. Possible causes are: -The user name or password specified are invalid. -Kerberos is used when no authentication method and no user name are specified. -Kerberos accepts domain user names, but not local user names. -The Service Principal Name (SPN) for the remote computer name and port does not exist. -The client and remote computers are in different domains and there is no trust between the two domains. After checking for the above issues, try the following: -Check the Event Viewer for events related to authentication. -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or us e HTTPS transport. Note that computers in the TrustedHosts list might not be authenticated. -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic. At line:1 char:16 + Enter-PSSession <<<< -computername sheetal-VDD -credential compose04.com\Sheetal.Varpe + CategoryInfo : InvalidArgument: (sheetal-VDD:String) [Enter-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : CreateRemoteRunspaceFailed Can someone help me out in this?

    Read the article

  • TGT validation fails, but only for one user

    - by wzzrd
    I'm seeing the weirdest thing here. I have a couple of RHEL3, 4 and 5 machines that validate user credentials through Kerberos with an Active Directoy domain controller as their KDC. This works for all of my users, save one. There is one account that is unable to log into RHEL3 Linux machines and generates the following errors there: May 31 13:53:19 mybox sshd(pam_unix)[7186]: authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=10.0.0.1 user=user May 31 13:53:20 mybox sshd[7186]: pam_krb5: TGT verification failed for `user' May 31 13:53:20 mybox sshd[7186]: pam_krb5: authentication fails for `user' Other accounts, like my own, are fine: May 31 17:25:30 mybox sshd(pam_unix)[12913]: authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=10.0.0.1 user=myuser May 31 17:25:31 mybox sshd[12913]: pam_krb5: TGT for myuser successfully verified May 31 17:25:31 mybox sshd[12913]: pam_krb5: authentication succeeds for `myuser' May 31 17:25:31 mybox sshd(pam_unix)[12915]: session opened for user myuser by (uid=0) As you can see, TGT validation fails. This only happens for this specific account, not for any other. The failing useraccount's password has been reset, I inspected both user objects in Active Directory, but I see nothing out of the ordinary. If I have the failing useraccount log into a RHEL4 or 5 box, there is not problem, so it must be RHEL3 specific, but the fact that only one account suffers from this, alludes me. Maybe someone has seen this before?

    Read the article

  • CodePlex Daily Summary for Tuesday, November 27, 2012

    CodePlex Daily Summary for Tuesday, November 27, 2012Popular ReleasesCodeGen Code Generator: CodeGen 4.2.6: IMPORTANT: If you are using CodeGen in conjunction with Symphony Framework then it is important that you do not upgrade to this version of CodeGen until you also upgrade to Symphony Framework V2.1.0.0. Changes in this release include: The CodeGen installation on Windows now supports upgrading from a previously installed version. We use Windows Installers "major upgrade" mechanism, which essentially performs an automatic uninstall of a previous version before installing the new version. The ea...SimpleRest Integrated Pipeline: Beta: Beta version of the integrated REST pipeline.Kooboo CMS: Kooboo CMS 3.3.0: New features: Dropdown/Radio/Checkbox Lists no longer references the userkey. Instead they refer to the UUID field for input value. You can now delete, export, import content from database in the site settings. Labels can now be imported and exported. You can now set the required password strength and maximum number of incorrect login attempts. Child sites can inherit plugins from its parent sites. The view parameter can be changed through the page_context.current value. Addition of c...Facebook Windows 8 Sample: Facebook Windows 8 Sample: The current drop holds two versions of the sample: A basic version that uses a Facebook application to list the content of facebook page. A full version including the use of Bing Maps sdk for positioning the restaurant in a map, and showing how to get there. See Developing a Windows Store App to learn how to use the Bing Maps AJAX Control to add Bing Maps to your Windows Store app.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.75: Fix over-aggressive removal of local-variable assignments in return statements. Can't remove them if there are any inner-scope references. add settings properties/switches for V3 source map source root value, and a flag to indicate whether to add an XSSI-busting header to the map file.Distributed Publish/Subscribe (Pub/Sub) Event System: Distributed Pub Sub Event System Version 3.0: Important Wsp 3.0 is NOT backward compatible with Wsp 2.1. Prerequisites You need to install the Microsoft Visual C++ 2010 Redistributable Package. You can find it at: x64 http://www.microsoft.com/download/en/details.aspx?id=14632x86 http://www.microsoft.com/download/en/details.aspx?id=5555 Wsp now uses Rx (Reactive Extensions) and .Net 4.0 3.0 Enhancements I changed the topology from a hierarchy to peer-to-peer groups. This should provide much greater scalability and more fault-resi...sb0t v.5: sb0t 500 alpha 5: Keep those bug reports coming. :)Redmine Reports: Redmine Reports V 1.0.7: added new sample report added new DateRange feature for report generation (see issue Tracker ID 15372) updated to latest MySql (6.6.4.0)datajs - JavaScript Library for data-centric web applications: datajs version 1.1.0: datajs is a cross-browser and UI agnostic JavaScript library that enables data-centric web applications with the following features: OData client that enables CRUD operations including batching and metadata support using both ATOM and JSON payloads. Single store abstraction that provides a common API on top of HTML5 local storage technologies. Data cache component that allows reading data ranges from a collection and storing them locally to reduce the number of network requests. Changes...Team Foundation Server Administration Tool: 2.2: TFS Administration Tool 2.2 supports the Team Foundation Server 2012 Object Model. Visual Studio 2012 or Team Explorer 2012 must be installed before you can install this tool. You can download and install Team Explorer 2012 from http://aka.ms/TeamExplorer2012. There are no functional changes between the previous release (2.1) and this release.Coding Guidelines for C# 3.0, C# 4.0 and C# 5.0: Coding Guidelines for CSharp 3.0, 4.0 and 5.0: See Change History for a detailed list of modifications.Math.NET Numerics: Math.NET Numerics v2.3.0: Portable Library Build: Adds support for WP8 (.Net 4.0 and higher, SL5, WP8 and .NET for Windows Store apps) New: portable build also for F# extensions (.Net 4.5, SL5 and .NET for Windows Store apps) NuGet: portable builds are now included in the main packages, no more need for special portable packages Linear Algebra: Continued major storage rework, in this release focusing on vectors (previous release was on matrices) Thin QR decomposition (in addition to existing full QR) Static Cr...ExtJS based ASP.NET 2.0 Controls: FineUI v3.2.1: +2012-11-25 v3.2.1 +????????。 -MenuCheckBox?CheckedChanged??????,??????????。 -???????window.IDS??????????????。 -?????(??TabCollection,ControlBaseCollection)???,????????????????。 +Grid??。 -??SelectAllRows??。 -??PageItems??,?????????????,?????、??、?????。 -????grid/gridpageitems.aspx、grid/gridpageitemsrowexpander.aspx、grid/gridpageitems_pagesize.aspx。 -???????????????????。 -??ExpandAllRowExpanders??,?????????????????(grid/gridrowexpanderexpandall2.aspx)。 -??????ExpandRowExpande...VidCoder: 1.4.9 Beta: Updated HandBrake core to SVN 5079. Fixed crashes when encoding DVDs with title gaps.ZXing.Net: ZXing.Net 0.10.0.0: On the way to a release 1.0 the API should be stable now with this version. sync with rev. 2521 of the java version windows phone 8 assemblies improvements and fixesBlackJumboDog: Ver5.7.3: 2012.11.24 Ver5.7.3 (1)SMTP???????、?????????、??????????????????????? (2)?????????、?????????????????????????? (3)DNS???????CNAME????CNAME????????????????? (4)DNS????????????TTL???????? (5)???????????????????????、?????????????????? (6)???????????????????????????????Liberty: v3.4.3.0 Release 23rd November 2012: Change Log -Added -H4 A dialog which gives further instructions when attempting to open a "Halo 4 Data" file -H4 Added a short note to the weapon editor stating that dropping your weapons will cap their ammo -Reach Edit the world's gravity -Reach Fine invincibility controls in the object editor -Reach Edit object velocity -Reach Change the teams of AI bipeds and vehicles -Reach Enable/disable fall damage on the biped editor screen -Reach Make AIs deaf and/or blind in the objec...Umbraco CMS: Umbraco 4.11.0: NugetNuGet BlogRead the release blog post for 4.11.0. Whats new50 bugfixes (see the issue tracker for a complete list) Read the documentation for the MVC bits. Breaking changesGetPropertyValue now returns an object, not a string (only affects upgrades from 4.10.x to 4.11.0) NoteIf you need Courier use the release candidate (as of build 26). The code editor has been greatly improved, but is sometimes problematic in Internet Explorer 9 and lower. Previously it was just disabled for IE and...Audio Pitch & Shift: Audio Pitch And Shift 5.1.0.3: Fixed supported files list on open dialog (added .pls and .m3u) Impulse Media Player splash message (can be disabled anyway)WiX Toolset: WiX v3.7 RC: WiX v3.7 RC (3.7.1119.0) provides feature complete Bundle update and reference tracking plus several bug fixes. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/11/20/WiX-v3.7-Release-Candidate-availableNew Projects20121126: ??????SVN????。AHMobe: Testing deployments to AppHarborArborium: A versatile, tree-based data structure to store or exchange data and metadata efficiently (in binary format). Written in pure C#.Ballenato: Mobile app salidas.Blend Assets Manager (Blasm): Blend Assets Manager (Blasm) is a simple application to allow users of Expression Blend adding custom and third-party controls to Blend Assets tab.Cornell Class Explorer: Cornell University Courses of Study Windows 8 AppCustom Cursor for Metro APP XAML Based: It's a porting program from Nielsen for win 8 Metro Style app XAML based. original: http://www.sharpgis.net/post/2011/05/09/Custom-Cursors-in-Silverlight.aspxDataAnalyzer: Application for analyzing protocols and other binary dataDebugWriterTextBox: This is modified TextBox which can catch up Debug.Write() and display log. Also it can write log data to file - all you need is to set up file name!Dewin: Solution th? nghi?m cho chuong trình Dewin, dùng d? th?c hi?n co b?n v? hu?ng d?i tu?ngEducação no Trânsito: Sistema para Educação para o Trânsito – Um Ambiente para o Aprendizado tem como principal função gerir conteúdos de educação no trânsitoEjemplos alabra: Ejemplos para el blog http://www.alejandrolabra.comEnterprise MVC Music Store: The Enterprise Music Store takes the MvcMusicStore sample from ASP.Net and adds Dependency Injection, Unit Tests and a more maintainable architecture. ERC - Easy Redirect Converter: Tool to convert websites using .htaccess to maintain redirects on sites that do not support it. Great for moving from Apache to IIS Facebook Windows 8 Sample: This sample shows a way to work with Facebook APIs by using the Open Graph API in a Windows Store App. Gruyas: Plataforma educativa online Os like.G's Syndication Pocket: G's Syndication Pocket is simple RSS Aggregate application. This is suitable for .NET Compact Framework. I checked it on Sharp's W-ZERO3.HTML to OpenXML (PHP Script): H2OXML : HTML to OpenXML Converter is a simple PHP script which take HTML code and transform it into OpenXML Code. (for Docx) Indexr: Indexr is an open source project, where I am trying to share how to build a web application with Strong Architecture, Manageable, High Performance, EffectivelyjQuery Expandable Menu for SharePoint 2010: Packaged as a site collection feature, this component transforms the SharePoint 2010 standard navigation menu into an expandable-collapsible menu, using jQuery.K-Vizinhos: K-VizinhosLa Ranisima: La Ranisima is an open source "Space Invaders" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses keyboard. This cross-platform and cross-browser game was tested under BeOS, Linux, NetBSD, OpenBSD, FreeBSD, Windows and others.lambdaCommandBuilderData: ???????????????????,????????????,???????。 ??????test??,?????????。LeyRay: Quick view and merge Doc and Pdf filesMessegeBox RightToLeft Lib: This is really simple lib project for use RTL in MessegeBox class. This just for short code and default option for RTL.MineFlagger: MineFlagger is a mine clearing game modeled after Microsoft’s Minesweeper. In addition to standard play, MineFlagger incorporates an AI for fun and training.MineSweeperChallenge: C# programming exercise. Simulates a given number of minesweeper games using a given ISweeper implementation (or use the step by step mode to study how the ISweeper implementations work). Create your own implementation and see how it compares to other implementations.MVVM Light Plus: Multiplatform MVVM Framework.Nethouse MVP: Nethouse MVP is a framework incorporating MVP base presenters, views and interfaces. Neznayka: Static Ruleset for VS2010 Database Edition. Noctl Library: Noctl is a C# library which contains tools to improve production time. It supports .net 4.5, Windows Phone 8 and Windows Store applications.Oridea.Data.Fetching: Oridea.Data.Fetching is a class library that consists of a few wrappers over the LINQ's IQueryable interface narrowing its scope to fetching, ordering, and paging operations. It is designed for use in the implementations of the Repository pattern.p301: Old project.PluggEd: To be continuedProject13241127: papaProject13271127: papareading control for windows phone: reading control for windows phoneRSUtility: RS Utility is a C# application that interacts with a SQL Server Reporting Services (SSRS) web service to manage items on a report server.sadd.practical.approach: SADD workshop is a project testorage to demonstrate practical approach of sadd while Lessons Learned site was developing. ?????? ???? ?????????? ??????????? ??? ?? ???????? ?????????? SADD ??? ???????? ????? "????????? ??????", ??????????? ????????? ??????????????? ?????? ?????.SimpleRest Integrated Pipeline: Simple light weight integrated extensible REST pipeline that developers can use to very quickly and reliably create REST services. Influenced by WebApi 0..6.0.0Substitute - Variable Substitution Utility for Config Management: Variable Substitution Utility for Configuration Management (FinalBuilder etc)Synq Placement Management Console: A client-service system for dynamic application deployment which integrates directly into active directory. This is the management console.Task Manager Student Project: Task manager or tmanager is a student ASP.NET MVC 4.0 project for Software Engineering classes. It is a web site, where you can planning your tasks.Tempus Fugate: YAFA for tracking music ratings and statistics. End state of these tools, utilities, plug-ins, and services will be to allow merging of statistic data between the various services and repositories in which users store their musical preferences. Examples of musical preferences include rating information and play history. Examples of services include last.fm, Facebook, iLike, Windows Media Player, and iTunes. tysyjsj: afaprojectWASM: Simple ASP.MVC windows azure storage manager with SQL Azure query window.Weather Slice: Use the German weather sevice Wetter.com for a weather forecast gadget Wettervorhersage von Wetter.comwwtfly: 111YBOT_Field_Control_2013: YBOT 2013 Field Control Software. Used to control the Youth BOT game field. Score the games and track field actions. The field currently uses 1-wire.??_iwtfly: ??_iwtfly

    Read the article

  • Social Network Updates: While You Were Busy Marketing 2

    - by Mike Stiles
    Since social moves at the speed of data, it’s already time for another update, as we did back in April, on the changes the various social networks have made or gone through while you were busy marketing. Facebook There’s a lot of talk Facebook’s developing a mobile product to act like Flipboard and surface news, from both users and media outlets. The biggest news was Facebook/Instagram’s introduction of 15-second videos, enhanced with with filters, to take some of Vine’s candy. You can also delete parts of videos and rerecord them, and there’s image stabilization. Facebook’s ad revenue is coming along just fine, thank you very much. 35% quarter-to-quarter growth in Q2. And it looks like new formats like Mobile App Install Ads and Unpublished Page Posts are adding to the mix. If you don’t already, you’ll soon see a little camera in comment boxes letting you insert photos right into the comments you make. The drive toward “more visual” continues. The other big news is Facebook’s adoption of our Twitter friend, the hashtag. Adding # sets apart the post topic so it can be easily found or discovered. It’s also being added to Google Plus, Tumblr, and Pinterest. Twitter Want to send someone a promoted tweet when they’re in range of your store? That could be happening by the end of this year. Some users have been seeing automatic in-stream previews of images on Twitter.com. Right now it’s images in your own tweets, but we can assume all tweets are next. Get your followers organized! Twitter raised the limit on the number of lists you can create from 20 to 1,000. They also raised the number of accounts you can have in a list from 500 to 5,000. Twitter started notifying you when someone favorites a tweet you’re mentioned in or re-tweets a tweet you re-tweeted. Anyway, it’s the first time Twitter’s notified you about indirect interactions like that. Who’s afraid of Instagram? A study shows 6-second Vine videos are being posted to Twitter at the rate of 9/second, up from 5/second 2 months ago. Vine has over 13 million users and branded Vines are 4x more likely to be shared than video ads. Google Plus Now featuring a 3-column redesigned stream, and images that take up a whole column. And photo filters Auto Highlight and Auto Awesome work to turn your photos into a real show. Google Hangouts is the workhorse for all Google messaging now, it’s not just an online chat with 9 people anymore. Google Plus Dashboard improves the connection between your company’s Google Plus business page and your Google Plus Local. Updates go out across all Google properties and you can do your managing from the dashboard. With Google Plus’ authorship system, you can build “Author Rank” based on what you write and put on the web. If your stuff is +1’ed and shared a lot, you’re the real deal and there are search result benefits. LinkedIn "Who's Viewed Your Updates" shows you what you’ve shared recently, who saw it and what they did about it in real-time. “Influencers” is, well, influential. Traffic to all LI news products has gone up 8x since it was introduced. LinkedIn is quickly figuring out how to get users to stick around awhile. You and your brand can post images and documents in status updates now. In fact, that whole “document posting” thing is making some analysts wonder if LinkedIn will drift on over to the Dropboxes and YouSendIts of the world. C’mon, admit it. Your favorite part of LinkedIn is being able to see who’s viewed your profile. Now you’ve got even more info and can see what/who you have in common. Premium users get even deeper insights about how people are finding them. If you’re a big fan of security, you’ll love that LinkedIn started offering two-factor authentication (2FA). It’s optional, but step 2 is a one-time code texted to your registered mobile. Pinterest A study showed pins have a looong shelf life compared to other social net posts. “Clicks kept coming for 30 days and beyond.” Most pins are timeless, and the infinite scroll causes people to see older pins. Is it a keeper? Pinterest jumped 82% to 54 million users in the past year. It’s valued at $2.5 billion and is one of the biggest sources of referral traffic there is. That said, CEO Ben Silbermann adds, "Right now, we don't make money." A new search feature stops you from having to endlessly scroll through your own pins looking for that waterfall picture you posted. Simply select “just my pins” in the search bar. New "Rich Pins" lets brands add info like price and availability to pins that can be updated daily via a data feed from your merchant site. Not so fast, you have to apply to Pinterest for it first. Like other social nets, Pinterest does not allow sexual content, nudity, or even partial nudity. However…some art contains nudity, and Pinterest wants to allow art. What constitutes “art” will be judged by…what we have to assume are Pinterest employees who love their job. @mikestilesPhoto: stock.xchng, Tim Marmon

    Read the article

  • Did you miss the OFM Summer Camps III? Get access to the b2b & adapters and SOA Governance training material

    - by JuergenKress
    We posted the SOA Governance and b2b & adapters training material at our SOA Community Workspace (SOA Community membership required). We have no plans to post the ACM and Advanced SOA training material. Special thanks to all the trainers who delivered superb workshops. Thanks to all the partners who invested time and utilization plus travel expenses to attend the camp. Special thanks to all the international partners who traveled a long way to sunny Lisbon – including our Mexican friends! The Summer Camp feedback was excellent, everybody answered the question if he would attend a future OFM Summer Camp with YES and the overall feedback is 4,79 out of 5 (best)! For most of the trainings we had a waiting list with additional partners who want to attend. Make sure you use your middleware skills to deliver successful projects. It would be great if you can support your colegues and the community by sharing the lessons learned and best practice. Thanks for great feedback at twitter please continue to send your pictures to our twitter feed @soacommunity #OFMsummercamps or post them at our Facebook page. Here is a selection of some tweets: Walter Montantes ?México presence en #OFMSummerCamp Lisboa 2013 cc @soacommunity @AdquemTI pic.twitter.com/9NEFwsWCAq SOA Community ?thanks for attending the #OFMSummercamp - save trip home ;-) Want to attend a future training register http://www.oracle.com/goto/emea/soa #soacommunity C2B2 Consulting ?Last day at the #OFMSummercamp Oracle SOA Suite Training in Portugal @soacommunity pic.twitter.com/6LZavVlvHc Patrick Sinke ?a FollowFriday for @Oracle_B2B because 19 followers is not enough #FF #OFMSummercamp Patrick Sinke ?Yogesh Sontakke is talking about #SOA #Governance. #OFMSummercamp Nuno Cancelo ?Oracle SOA Governance - Quick Overview #OFMSummerCamp Nuno Cancelo ?Last coffee break. #OFMSummercamp pic.twitter.com/xZi9M5vAWz Scott Haaland Last day of #OFMSummercamp. It's been a great productive week..great students eager to learn. @Oracle_B2B @soacommunity . Patrick Sinke ?singletons are used to retain specific fetching order of files and records in multithread/multi-instance environment. #OFMSummercamp #SOA Patrick Sinke ?SOA's File Adapter is extremely versatile: It writes, reads and converts almost any type of file. #OFMSummercamp pic.twitter.com/XjtJF9Y5SH Patrick Sinke ?Now deep-diving into Java EE Connector Architecture (JCA). Got to do some catching up at home on this subject. #OFMSummercamp #SOA Patrick Sinke ?Today we start with security and OPSS at #OFMSummercamp Advanced #SOA training. Then some #OSB. #OFM #Oracle #whitehorses Remco Cats ?Starting the last day on #OFMSummercamp building ADF Mobile applications with BPM Nuno Cancelo ?While attending #OFMSummerCamp i notice even more the importance of designing software. Any tips in how to become an software architect? Patrick Sinke ?Extensive information on Faullt handling and policies now in Advanced #SOA track. #OFMSummercamp #oraclesoa #middleware #whitehorses C2B2 Consulting ?Geoffroy de Lamalle speaking at the #OFMSummercamp @soacommunity pic.twitter.com/m4oOyzYB2q Patrick Sinke ?Oracle Document editor is a huge tool (6GB), but contains every version and subset of EDI, HL7, etc definitions. Impressive. #OFMSummercamp Patrick Sinke ?Oracle #B2B 11g presentation on #OFMSummercamp by Scott. Unfortunately only 2 hours in SOA advanced class. Very interesting. SOA Community Bon dia #OFMSummercamp - if you are here in sunny Lisbon ;-) you can checkin at http://foursquare.com/ #soacommunity pic.twitter.com/PnmudJgJTZ Nuno Cancelo ?Beautiful day! #OFMSummercamp pic.twitter.com/nwByRM5YE1 Nuno Cancelo ?Relaxing after lunch :-) #OFMSummercamp pic.twitter.com/hOJzebCM5p SOA Community Posted pictures from OFM Summer Camp III at our facebook page - share yours! https://www.facebook.com/soacommunity #OFMSummerCamp #soacommunity Nuno Cancelo ?Coffee break: day3 #OFMSummercamp pic.twitter.com/97n1sAGhx4 Patrick Sinke #OFMSummercamp day 3; SOA Infrastructure. pic.twitter.com/ziivyw3L6q SOA Community ?@soacommunity 28 Aug Bon dia day 3 at #OFMSummercamp in Lisboa. Nial presenting ACM roadmap pic.twitter.com/iN3gTCHSbA SOA Community ?Hands-on time at the b2b & adapters training part of the #OFMSummercamp #soacommunity pic.twitter.com/9BzI7igrX8 SOA Community ?Laptop replacement at #OFMSummercamp - big thanks to Oracle Portugal for the fast help! 10 seconds to cut the cable pic.twitter.com/nwd2Px73pa SOA Community ?Hard work long training until 18.00 now enjoy the beach #ofmsummercamp #soacommunity pic.twitter.com/StogfxJNFH Walter Montantes? Primer día #OFMSummercamp pic.twitter.com/cTNDpzg5pL Miguel Delgadillo ?@walex86 Advanced SOA training by Geoffroy at #OFMSummercamp - full room hard working class pic.twitter.com/2SDz9FVhkh” si le sabes? SOA Community ?Welcome to the #OFMSummercamp in sunny Lisbon ;-) Send us your pictures of the training and city @soacommunity pic.twitter.com/i2ErZaaFbb SOA Community ?Advanced SOA training by Geoffroy at #OFMSummercamp - full room hard working class pic.twitter.com/uKjv0tV2bO Nuno Cancelo #OFMSummercamp afternoon break:) pic.twitter.com/pUaBvt2NIj Impressions of the event are posted at our facebook page. If you missed Lisbon, make sure you attend one of our Additional Middleware Trainings in Europe: We currently run 3 different training roadshows for Business Process Management & ADF & WebLogic across Europe make sure you sing-up for them: ADF & ADF Mobile or Business Process Management Suite or WebLogic Suite. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: b2b,training,education,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

    Read the article

  • WebLogic JDBC Use of Oracle Wallet for SSL

    - by Steve Felts
    Introduction Secure Sockets Layer (SSL) can be used to secure the connection between the middle tier “client”, WebLogic Server (WLS) in this case, and the Oracle database server.  Data between WLS and database can be encrypted.  The server can be authenticated so you have proof that the database can be trusted by validating a certificate from the server.  The client can be authenticated so that the database only accepts connections from clients that it trusts. Similar to the discussion in an earlier article about using the Oracle wallet for database credentials, the Oracle wallet can also be used with SSL to store the keys and certificates.  By using it correctly, clear text passwords can be eliminated from the JDBC configuration and client/server configuration can be simplified by sharing the wallet across multiple datasources. There is a very good Oracle Technical White Paper on using SSL with the Oracle thin driver at http://www.oracle.com/technetwork/database/enterprise-edition/wp-oracle-jdbc-thin-ssl-130128.pdf [LINK1].  The link http://www.oracle.com/technetwork/middleware/weblogic/index-087556.html [LINK2] describes how to use WebLogic Server with Oracle JDBC Driver SSL. The information in this article is a guide on what steps need to be taken in the variety of available options; use the links above for details. SSL from the driver to the database server is basically turned on by specifying a protocol of “tcps” in the URL.  However, there is a fair amount of setup needed.  Also remember that there is an overhead in performance. Creating the wallets The common use cases are 1. “data encryption and server-only authentication”, requiring just a trust store, or 2. “data encryption and authentication of both tiers” (client and server), requiring a trust store and a key store. It is recommended to use the auto-login wallet type so that clear text passwords are not needed in the datasource configuration to open the wallet.  The store type for an auto-login wallet is “SSO” (Single Sign On), not “JKS” or “PKCS12” as in [LINK2].  The file name is “cwallet.sso”. Wallets are created using the orapki tool.  They need to be created based on the usage (encryption and/or authentication).  This is discussed in detail in [LINK1] in Appendix B or in the Advanced Security Administrator’s Guide of the Database documentation. Database Server Configuration It is necessary to update the sqlnet.ora and listener.ora files with the directory location of the wallet using WALLET_LOCATION.  These files also indicate whether or not SSL_CLIENT_AUTHENTICATION is being used (true or false). The Oracle Listener must also be configured to use the TCPS protocol.  The recommended port is 2484. LISTENER = (ADDRESS_LIST= (ADDRESS=(PROTOCOL=tcps)(HOST=servername)(PORT=2484))) WebLogic Server Classpath The WebLogic Server CLASSPATH must have three additional security files. The files that need to be added to the WLS CLASSPATH are $MW_HOME/modules/com.oracle.osdt_cert_1.0.0.0.jar $MW_HOME/modules/com.oracle.osdt_core_1.0.0.0.jar $MW_HOME/modules/com.oracle.oraclepki_1.0.0.0.jar One way to do this is to add them to PRE_CLASSPATH environment variable for use with the standard WebLogic scripts. Setting the Oracle Security Provider It’s necessary to enable the Oracle PKI provider on the client side.  This can either be done statically by updating the java.security file under the JRE or dynamically by setting it in a WLS startup class using java.security.Security.insertProviderAt(new oracle.security.pki.OraclePKIProvider (), 3); See the full example of the startup class in [LINK2]. Datasource Configuration When creating a WLS datasource, set the PROTOCOL in the URL to tcps as in the following. jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=host)(PORT=port))(CONNECT_DATA=(SERVICE_NAME=myservice))) For encryption and server authentication, use the datasource connection properties: - javax.net.ssl.trustStore=location of wallet file on the client - javax.net.ssl.trustStoreType=”SSO” For client authentication, use the datasource connection properties: - javax.net.ssl.keyStore=location of wallet file on the client - javax.net.ssl.keyStoreType=”SSO” Note that the driver connection properties for the wallet require a file name, not a directory name. Active GridLink ONS over SSL For completeness, there is another SSL usage for WLS datasources.  The communication with the Oracle Notification Service (ONS) for load balancing information and node up/down events can use SSL also. Create an auto-login wallet and use the wallet on the client and server.  The following is a sample sequence to create a test wallet for use with ONS. orapki wallet create -wallet ons -auto_login -pwd ONS_Wallet orapki wallet add -wallet ons -dn "CN=ons_test,C=US" -keysize 1024 -self_signed -validity 9999 -pwd ONS_Wallet orapki wallet export -wallet ons -dn "CN=ons_test,C=US" -cert ons/cert.txt -pwd ONS_Wallet On the database server side, it’s necessary to define the walletfile directory in the file $CRS_HOME/opmn/conf/ons.config and run onsctl stop/start. When configuring an Active GridLink datasource, the connection to the ONS must be defined.  In addition to the host and port, the wallet file directory must be specified.  By not giving a password, a SSO wallet is assumed. Summary To use SSL with the Oracle thin driver without any clear text passwords, use an SSO Oracle Wallet.  SSL support in the Oracle thin driver is available starting in 10g Release 2.

    Read the article

  • Cisco ASA: Allowing and Denying VPN Access based on membership to an AD group

    - by milkandtang
    I have a Cisco ASA 5505 connecting to an Active Directory server for VPN authentication. Usually we'd restrict this to a particular OU, but in this case users which need access are spread across multiple OUs. So, I'd like to use a group to specify which users have remote access. I've created the group and added the users, but I'm having trouble figuring out how to deny users which aren't in that group. Right now, if someone connects they get assigned the correct group policy "companynamera" if they are in that group, so the LDAP mapping is working. However, users who are not in that group still authenticate fine, and their group policy becomes the LDAP path of their first group, i.e. CN=Domain Users,CN=Users,DC=example,DC=com, and then are still allowed access. How do I add a filter so that I can map everything that isn't "companynamera" to no access? Config I'm using (with some stuff such as ACLs and mappings removed, since they are just noise here): gateway# show run : Saved : ASA Version 8.2(1) ! hostname gateway domain-name corp.company-name.com enable password gDZcqZ.aUC9ML0jK encrypted passwd gDZcqZ.aUC9ML0jK encrypted names name 192.168.0.2 dc5 description FTP Server name 192.168.0.5 dc2 description Everything server name 192.168.0.6 dc4 description File Server name 192.168.0.7 ts1 description Light Use Terminal Server name 192.168.0.8 ts2 description Heavy Use Terminal Server name 4.4.4.82 primary-frontier name 5.5.5.26 primary-eschelon name 172.21.18.5 dmz1 description Kerio Mail Server and FTP Server name 4.4.4.84 ts-frontier name 4.4.4.85 vpn-frontier name 5.5.5.28 ts-eschelon name 5.5.5.29 vpn-eschelon name 5.5.5.27 email-eschelon name 4.4.4.83 guest-frontier name 4.4.4.86 email-frontier dns-guard ! interface Vlan1 nameif inside security-level 100 ip address 192.168.0.254 255.255.255.0 ! interface Vlan2 description Frontier FiOS nameif outside security-level 0 ip address primary-frontier 255.255.255.0 ! interface Vlan3 description Eschelon T1 nameif backup security-level 0 ip address primary-eschelon 255.255.255.248 ! interface Vlan4 nameif dmz security-level 50 ip address 172.21.18.254 255.255.255.0 ! interface Vlan5 nameif guest security-level 25 ip address 172.21.19.254 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 switchport access vlan 3 ! interface Ethernet0/2 switchport access vlan 4 ! interface Ethernet0/3 switchport access vlan 5 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone PST -8 clock summer-time PDT recurring dns domain-lookup inside dns server-group DefaultDNS name-server dc2 domain-name corp.company-name.com same-security-traffic permit intra-interface access-list companyname_splitTunnelAcl standard permit 192.168.0.0 255.255.255.0 access-list companyname_splitTunnelAcl standard permit 172.21.18.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.20.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.18.0 255.255.255.0 access-list bypassingnat_dmz extended permit ip 172.21.18.0 255.255.255.0 192.168.0.0 255.255.255.0 pager lines 24 logging enable logging buffer-size 12288 logging buffered warnings logging asdm notifications mtu inside 1500 mtu outside 1500 mtu backup 1500 mtu dmz 1500 mtu guest 1500 ip local pool VPNpool 172.21.20.50-172.21.20.59 mask 255.255.255.0 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface global (outside) 2 email-frontier global (outside) 3 guest-frontier global (backup) 1 interface global (dmz) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 2 dc5 255.255.255.255 nat (inside) 1 192.168.0.0 255.255.255.0 nat (dmz) 0 access-list bypassingnat_dmz nat (dmz) 2 dmz1 255.255.255.255 nat (dmz) 1 172.21.18.0 255.255.255.0 access-group outside_access_in in interface outside access-group dmz_access_in in interface dmz route outside 0.0.0.0 0.0.0.0 4.4.4.1 1 track 1 route backup 0.0.0.0 0.0.0.0 5.5.5.25 254 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 ldap attribute-map RemoteAccessMap map-name memberOf IETF-Radius-Class map-value memberOf CN=RemoteAccess,CN=Users,DC=corp,DC=company-name,DC=com companynamera dynamic-access-policy-record DfltAccessPolicy aaa-server ActiveDirectory protocol ldap aaa-server ActiveDirectory (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft aaa-server ADRemoteAccess protocol ldap aaa-server ADRemoteAccess (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft ldap-attribute-map RemoteAccessMap aaa authentication enable console LOCAL aaa authentication ssh console LOCAL http server enable http 192.168.0.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart sla monitor 123 type echo protocol ipIcmpEcho 4.4.4.1 interface outside num-packets 3 frequency 10 sla monitor schedule 123 life forever start-time now crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 ! track 1 rtr 123 reachability telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh timeout 5 ssh version 2 console timeout 0 management-access inside dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy companynamera internal group-policy companynamera attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com group-policy companyname internal group-policy companyname attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com username admin password IhpSqtN210ZsNaH. encrypted privilege 15 tunnel-group companyname type remote-access tunnel-group companyname general-attributes address-pool VPNpool authentication-server-group ActiveDirectory LOCAL default-group-policy companyname tunnel-group companyname ipsec-attributes pre-shared-key * tunnel-group companynamera type remote-access tunnel-group companynamera general-attributes address-pool VPNpool authentication-server-group ADRemoteAccess LOCAL default-group-policy companynamera tunnel-group companynamera ipsec-attributes pre-shared-key * ! class-map type inspect ftp match-all ftp-inspection-map class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect ftp ftp-inspection-map parameters class ftp-inspection-map policy-map type inspect dns migrated_dns_map_1 parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns migrated_dns_map_1 inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect ils inspect netbios inspect rsh inspect rtsp inspect skinny inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp inspect icmp inspect icmp error inspect esmtp inspect pptp ! service-policy global_policy global prompt hostname context Cryptochecksum:487525494a81c8176046fec475d17efe : end gateway# Thanks so much!

    Read the article

  • Changing the action of a form with javascript/jquery

    - by Micah
    I'm having an issue that is driving me crazy. I'm trying to modify the openid-selector to support facebook. I'm using RPXNow as my provider so it requires the form to be submitted to a different url than the standard. For example. RpxNow requires me to setup my form like this: <form action="https://wikipediamaze.rpxnow.com/openid/start?token_url=..."> This works for every provider except for facebook and myspace. Those require the form to be posted to a different url like this: <form action="https://wikipediamaze.rpxnow.com/facebook/start?token_url=..."> and <form action="https://wikipediamaze.rpxnow.com/myspace/start?token_url=..."> The open id selector has a bunch of buttons on the form each representing the openid providers. What I'm trying to do is detect when the facebook or myspace button is clicked and changed the action on the form before submitting. However it's not working. Here is my code. I've tried several variations all with the same "not supported" exception $("#openid_form").attr("action", form_url) document.forms[0].action = form_url Any suggestions? Update Here are more details on the code. I've ommitted some for brevity. The only thing i've done is added the facebook section to the "providers_large" object (which successfully adds the logo to the website), and instead of supply a url identifying the user, I'm creating a property called "form_url" which is what I want to set the action of my form to. If you look at the section title "Provider image click" you'll see where I'm checking for the presence of the property "form_url" and using jquery to change the action and submit the form. However when I step through the javascript in debug mode it tells me it's an ivalid operation. var providers_large = { google: { name: 'Google', url: 'https://www.google.com/accounts/o8/id' }, facebook: { name: 'Facebook', form_url: 'http://wikipediamaze.rpxnow.com/facebook/start?token_url=http://www.wikipediamaze.com/Accounts/Logon' }, }; var providers_small = { myopenid: { name: 'MyOpenID', label: 'Enter your MyOpenID username.', url: 'http://{username}.myopenid.com/' }, livejournal: { name: 'LiveJournal', label: 'Enter your Livejournal username.', url: 'http://{username}.livejournal.com/' }, flickr: { name: 'Flickr', label: 'Enter your Flickr username.', url: 'http://flickr.com/{username}/' }, technorati: { name: 'Technorati', label: 'Enter your Technorati username.', url: 'http://technorati.com/people/technorati/{username}/' }, wordpress: { name: 'Wordpress', label: 'Enter your Wordpress.com username.', url: 'http://{username}.wordpress.com/' }, blogger: { name: 'Blogger', label: 'Your Blogger account', url: 'http://{username}.blogspot.com/' }, verisign: { name: 'Verisign', label: 'Your Verisign username', url: 'http://{username}.pip.verisignlabs.com/' }, vidoop: { name: 'Vidoop', label: 'Your Vidoop username', url: 'http://{username}.myvidoop.com/' }, verisign: { name: 'Verisign', label: 'Your Verisign username', url: 'http://{username}.pip.verisignlabs.com/' }, claimid: { name: 'ClaimID', label: 'Your ClaimID username', url: 'http://claimid.com/{username}' } }; var providers = $.extend({}, providers_large, providers_small); var openid = { cookie_expires: 6*30, // 6 months. cookie_name: 'openid_provider', cookie_path: '/', img_path: 'images/', input_id: null, provider_url: null, init: function(input_id) { var openid_btns = $('#openid_btns'); this.input_id = input_id; $('#openid_choice').show(); $('#openid_input_area').empty(); // add box for each provider for (id in providers_large) { openid_btns.append(this.getBoxHTML(providers_large[id], 'large', '.gif')); } if (providers_small) { openid_btns.append('<br/>'); for (id in providers_small) { openid_btns.append(this.getBoxHTML(providers_small[id], 'small', '.ico')); } } $('#openid_form').submit(this.submit); var box_id = this.readCookie(); if (box_id) { this.signin(box_id, true); } }, getBoxHTML: function(provider, box_size, image_ext) { var box_id = provider["name"].toLowerCase(); return '<a title="'+provider["name"]+'" href="javascript: openid.signin(\''+ box_id +'\');"' + ' style="background: #FFF url(' + this.img_path + box_id + image_ext+') no-repeat center center" ' + 'class="' + box_id + ' openid_' + box_size + '_btn"></a>'; }, /* Provider image click */ signin: function(box_id, onload) { var provider = providers[box_id]; if (! provider) { return; } this.highlight(box_id); this.setCookie(box_id); // prompt user for input? if (provider['label']) { this.useInputBox(provider); this.provider_url = provider['url']; } else if(provider['form_url']) { $('#openid_form').attr("action", provider['form_url']); $('#openid_form').submit(); } else { this.setOpenIdUrl(provider['url']); if (! onload) { $('#openid_form').submit(); } } }, /* Sign-in button click */ submit: function() { var url = openid.provider_url; if (url) { url = url.replace('{username}', $('#openid_username').val()); openid.setOpenIdUrl(url); } return true; }, setOpenIdUrl: function (url) { var hidden = $('#'+this.input_id); if (hidden.length > 0) { hidden.value = url; } else { $('#openid_form').append('<input type="hidden" id="' + this.input_id + '" name="' + this.input_id + '" value="'+url+'"/>'); } }, highlight: function (box_id) { // remove previous highlight. var highlight = $('#openid_highlight'); if (highlight) { highlight.replaceWith($('#openid_highlight a')[0]); } // add new highlight. $('.'+box_id).wrap('<div id="openid_highlight"></div>'); }, setCookie: function (value) { var date = new Date(); date.setTime(date.getTime()+(this.cookie_expires*24*60*60*1000)); var expires = "; expires="+date.toGMTString(); document.cookie = this.cookie_name+"="+value+expires+"; path=" + this.cookie_path; }, readCookie: function () { var nameEQ = this.cookie_name + "="; var ca = document.cookie.split(';'); for(var i=0;i < ca.length;i++) { var c = ca[i]; while (c.charAt(0)==' ') c = c.substring(1,c.length); if (c.indexOf(nameEQ) == 0) return c.substring(nameEQ.length,c.length); } return null; }, useInputBox: function (provider) { var input_area = $('#openid_input_area'); var html = ''; var id = 'openid_username'; var value = ''; var label = provider['label']; var style = ''; if (label) { html = '<p>' + label + '</p>'; } if (provider['name'] == 'OpenID') { id = this.input_id; value = 'http://'; style = 'background:#FFF url('+this.img_path+'openid-inputicon.gif) no-repeat scroll 0 50%; padding-left:18px;'; } html += '<input id="'+id+'" type="text" style="'+style+'" name="'+id+'" value="'+value+'" />' + '<input id="openid_submit" type="submit" value="Sign-In"/>'; input_area.empty(); input_area.append(html); $('#'+id).focus(); } };

    Read the article

  • Squid, NTLM, Windows 7 and IE8

    - by Harley
    I'm running Squid 2.7-stable4, Samba 3 and the Windows 7 RC with IE8. I have NTLM authentication setup on my squid proxy server and it works fine for every combination of browser and Windows (including IE8 on XP and Firefox on Win7), but it doesn't work (keeps asking for authentication) for IE8 on Windows 7. I can get it to work using the LmCompatibilityLevel registry hack, but I'd really prefer to get it working on the server. Does anyone have any experience with this? Or know where to start looking? The samba logs don't reveal much. EDIT: Here's what the wb-MYDOMAIN log says when I attempt to authenticate: [2009/08/20 15:13:36, 4] nsswitch/winbindd_dual.c:fork_domain_child(1080) child daemon request 13 [2009/08/20 15:13:36, 10] nsswitch/winbindd_dual.c:child_process_request(478) process_request: request fn AUTH_CRAP [2009/08/20 15:13:36, 3] nsswitch/winbindd_pam.c:winbindd_dual_pam_auth_crap(1755) [ 4127]: pam auth crap domain: MYDOMAIN user: MYUSER [2009/08/20 15:13:36, 0] nsswitch/winbindd_pam.c:winbindd_dual_pam_auth_crap(1767) winbindd_pam_auth_crap: invalid password length 24/282 [2009/08/20 15:13:36, 2] nsswitch/winbindd_pam.c:winbindd_dual_pam_auth_crap(1931) NTLM CRAP authentication for user [MYDOMAIN]\[MYUSER] returned NT_STATUS_INVALID_PARAMETER (PAM: 4) [2009/08/20 15:13:36, 10] nsswitch/winbindd_cache.c:cache_store_response(2267) Storing response for pid 4547, len 3240

    Read the article

  • ActiveSync gives a 401.2 error

    - by Justin James
    Hello - I've been struggling for a while with a problem with ActiveSync, it is giving 401.2 errors when trying to access the mailboxes. Oddly enough, clients can get to the calendars just fine. I've tried from an Android device as well as the Exchange remote connectivity troubleshooter, same error both times. Here is the configuration: Connectivity through ISA 2006 Exchange 2007 on Windows 2008 Basic authentication is on ISA is passing through all authentication directly to the Exchange server The user IS allowed to get to ActiveSync in their Exchange mailbox settings I have tried the following, without success: * Making SSL not required * Enabling Windows Integrated and Digest authentication Here is an example of the errors in the IIS log: OPTIONS /Microsoft-Server-ActiveSync/default.eas - 443 - 192.168.32.18 TestActiveSyncConnectivity 401 2 5 0 Here is what I am seeing in my trace log: ModuleName IIS Web Core Notification 2 HttpStatus 401 HttpReason Unauthorized HttpSubStatus 2 ErrorCode 2147942405 ConfigExceptionInfo Notification AUTHENTICATE_REQUEST ErrorCode Access is denied. (0x80070005) I'm 100% stumped. Any clues? Thanks! J.Ja

    Read the article

  • Setting up a VPN connection to Amazon VPC - routing

    - by Keeno
    I am having some real issues setting up a VPN between out office and AWS VPC. The "tunnels" appear to be up, however I don't know if they are configured correctly. The device I am using is a Netgear VPN Firewall - FVS336GV2 If you see in the attached config downloaded from VPC (#3 Tunnel Interface Configuration), it gives me some "inside" addresses for the tunnel. When setting up the IPsec tunnels do I use the inside tunnel IP's (e.g. 169.254.254.2/30) or do I use my internal network subnet (10.1.1.0/24) I have tried both, when I tried the local network (10.1.1.x) the tracert stops at the router. When I tried with the "inside" ips, the tracert to the amazon VPC (10.0.0.x) goes out over the internet. this all leads me to the next question, for this router, how do I set up stage #4, the static next hop? What are these seemingly random "inside" addresses and where did amazon generate them from? 169.254.254.x seems odd? With a device like this, is the VPN behind the firewall? I have tweaked any IP addresses below so that they are not "real". I am fully aware, this is probably badly worded. Please if there is any further info/screenshots that will help, let me know. Amazon Web Services Virtual Private Cloud IPSec Tunnel #1 ================================================================================ #1: Internet Key Exchange Configuration Configure the IKE SA as follows - Authentication Method : Pre-Shared Key - Pre-Shared Key : --- - Authentication Algorithm : sha1 - Encryption Algorithm : aes-128-cbc - Lifetime : 28800 seconds - Phase 1 Negotiation Mode : main - Perfect Forward Secrecy : Diffie-Hellman Group 2 #2: IPSec Configuration Configure the IPSec SA as follows: - Protocol : esp - Authentication Algorithm : hmac-sha1-96 - Encryption Algorithm : aes-128-cbc - Lifetime : 3600 seconds - Mode : tunnel - Perfect Forward Secrecy : Diffie-Hellman Group 2 IPSec Dead Peer Detection (DPD) will be enabled on the AWS Endpoint. We recommend configuring DPD on your endpoint as follows: - DPD Interval : 10 - DPD Retries : 3 IPSec ESP (Encapsulating Security Payload) inserts additional headers to transmit packets. These headers require additional space, which reduces the amount of space available to transmit application data. To limit the impact of this behavior, we recommend the following configuration on your Customer Gateway: - TCP MSS Adjustment : 1387 bytes - Clear Don't Fragment Bit : enabled - Fragmentation : Before encryption #3: Tunnel Interface Configuration Your Customer Gateway must be configured with a tunnel interface that is associated with the IPSec tunnel. All traffic transmitted to the tunnel interface is encrypted and transmitted to the Virtual Private Gateway. The Customer Gateway and Virtual Private Gateway each have two addresses that relate to this IPSec tunnel. Each contains an outside address, upon which encrypted traffic is exchanged. Each also contain an inside address associated with the tunnel interface. The Customer Gateway outside IP address was provided when the Customer Gateway was created. Changing the IP address requires the creation of a new Customer Gateway. The Customer Gateway inside IP address should be configured on your tunnel interface. Outside IP Addresses: - Customer Gateway : 217.33.22.33 - Virtual Private Gateway : 87.222.33.42 Inside IP Addresses - Customer Gateway : 169.254.254.2/30 - Virtual Private Gateway : 169.254.254.1/30 Configure your tunnel to fragment at the optimal size: - Tunnel interface MTU : 1436 bytes #4: Static Routing Configuration: To route traffic between your internal network and your VPC, you will need a static route added to your router. Static Route Configuration Options: - Next hop : 169.254.254.1 You should add static routes towards your internal network on the VGW. The VGW will then send traffic towards your internal network over the tunnels. IPSec Tunnel #2 ================================================================================ #1: Internet Key Exchange Configuration Configure the IKE SA as follows - Authentication Method : Pre-Shared Key - Pre-Shared Key : --- - Authentication Algorithm : sha1 - Encryption Algorithm : aes-128-cbc - Lifetime : 28800 seconds - Phase 1 Negotiation Mode : main - Perfect Forward Secrecy : Diffie-Hellman Group 2 #2: IPSec Configuration Configure the IPSec SA as follows: - Protocol : esp - Authentication Algorithm : hmac-sha1-96 - Encryption Algorithm : aes-128-cbc - Lifetime : 3600 seconds - Mode : tunnel - Perfect Forward Secrecy : Diffie-Hellman Group 2 IPSec Dead Peer Detection (DPD) will be enabled on the AWS Endpoint. We recommend configuring DPD on your endpoint as follows: - DPD Interval : 10 - DPD Retries : 3 IPSec ESP (Encapsulating Security Payload) inserts additional headers to transmit packets. These headers require additional space, which reduces the amount of space available to transmit application data. To limit the impact of this behavior, we recommend the following configuration on your Customer Gateway: - TCP MSS Adjustment : 1387 bytes - Clear Don't Fragment Bit : enabled - Fragmentation : Before encryption #3: Tunnel Interface Configuration Outside IP Addresses: - Customer Gateway : 217.33.22.33 - Virtual Private Gateway : 87.222.33.46 Inside IP Addresses - Customer Gateway : 169.254.254.6/30 - Virtual Private Gateway : 169.254.254.5/30 Configure your tunnel to fragment at the optimal size: - Tunnel interface MTU : 1436 bytes #4: Static Routing Configuration: Static Route Configuration Options: - Next hop : 169.254.254.5 You should add static routes towards your internal network on the VGW. The VGW will then send traffic towards your internal network over the tunnels. EDIT #1 After writing this post, I continued to fiddle and something started to work, just not very reliably. The local IPs to use when setting up the tunnels where indeed my network subnets. Which further confuses me over what these "inside" IP addresses are for. The problem is, results are not consistent what so ever. I can "sometimes" ping, I can "sometimes" RDP using the VPN. Sometimes, Tunnel 1 or Tunnel 2 can be up or down. When I came back into work today, Tunnel 1 was down, so I deleted it and re-created it from scratch. Now I cant ping anything, but Amazon AND the router are telling me tunnel 1/2 are fine. I guess the router/vpn hardware I have just isnt up to the job..... EDIT #2 Now Tunnel 1 is up, Tunnel 2 is down (I didn't change any settings) and I can ping/rdp again. EDIT #3 Screenshot of route table that the router has built up. Current state (tunnel 1 still up and going string, 2 is still down and wont re-connect)

    Read the article

  • Remote Desktop, Host: 2008, Client: Windows 7, The remote computer requires Network Level Authentica

    - by deerchao
    Hi, today I accidently changed one option of Teminal Services, I checked "Allow connections only from computers running Remote Desktop with Network Level Authentication". After that, I can't connect to my server any more. The error says: The remote computer requires Network Level Authentication, which your computer does not support. But my client pcs(both home and at office) are running Windows 7, as far as I know, it shoud support NLA; And in About dialog of Remote Desktop Connection there says "Supports Network Level Authentication". My server is running Windows Server 2008, placed in IDC center; I could connect to it before I change the settings. All other sevices(like IIS, SQL Server) are running normally. For clients, I tried two PCs running Windows 7, and two virtual windows XP machine running in Virtual PC and Virtual Box, all of them gives the same error message. Is there a way I can make things right without go to IDC which is far away? Thanks.

    Read the article

  • DKIM passes everywhere apart from Yahoo!

    - by Ian
    Hi, I'm using dkim-milter, Postfix on Ubuntu (I think I used these instructions for setting up). Anyway, using the reflectors such as Port25, BlackOps and Altn.com I get passes for DKIM: X-DKIM: OpenDKIM Filter v2.0.1 medusa.blackops.org o2SGTMSg005616 Authentication-Results: medusa.blackops.org; dkim=pass (1024-bit key) [email protected]; dkim-adsp=pass dkim=pass header.d=example.com (b=miSIxi7TMX; 1:0:good); Authentication-Results: verifier.port25.com header.d=example.com; dkim=pass (matches From: [email protected]); Yahoo gives this: Authentication-Results: mta1031.mail.ukl.yahoo.com from=; domainkeys=neutral (no sig); from=example.com; dkim=permerror (key failed) Where, obviously, example.com is my site address. Is anyone aware of anything different with Yahoo! that would stop these from signing? TIA

    Read the article

  • Mercurial SSH process blocks when run from Local System

    - by Liedman
    We are using Mercurial over SSH for our development. We use Hudson for continous integration, and have deployed it on Tomcat, running on a Windows 2003 Server using the Local System account. Mercurial is configured to use Putty's plink.exe as its ssh command in Mercurial.ini, together with a private key for SSH authentication. When Hudson attempts any Mercurial command over SSH, the operation just blocks. I can see the three processes being started: hg.exe, cmd.exe and plink.exe. On the remote machine, I can also see the SSH session being opened and the authentication key being accepted. After that, nothing appears to happen, and everything just blocks, seemingly forever. (As a side note, subversion/SVN over SSH works from Hudson to the same server, using the same user and authentication key). A solution would of course be the best, but at least a hint for how I should debug it to get further would be nice, since I'm stuck and haven't even got an error message right now.

    Read the article

  • IE Kerberos failure on some machines with CNAME web server (with SPN for host's A record)

    - by Eric Thames
    It's fairly well known that IE doesn't like to do Kerberos against hosts that are registered in DNS as CNAMEs. What happens is that IE turns around and uses the underlying A record for the host for looking up the Service Principal Name (SPN). On a test network we are able to get Kerberos working by having the SPN registered for the A record of the host, so that Kerberos authentication happens successfully when accessing the web server via it's CNAME in the browser. Kerberos authentication works properly when directly accessing the web server with the A record host in the URL, but for various reasons that are beyond my control, it is desired to use the CNAME. On the production network, this same configuration fails though and I can't figure out why. Any thoughts? This is a java web application using the SPNEGO library - not IIS. Kerberos authentication is working properly in both the test and production networks (and has been confirmed to not fail back to NTLM), but the CNAME access only works in test.

    Read the article

  • Able to connect by SSH, but not x2go

    - by Mike
    I am having trouble connecting to a remote server with X2GO using a DSA key. Connecting works fine over SSH, but when I try to connect with X2GO, it goes immediately to the username/password box and doesn't want to use the private key I specify in the options. If I select "Try auto login" it appears to try to connect and then I get the following error: No public key matched Access denied. Authentication that can continue: publickey It was working previously, but I reinstalled the client OS and since then I am unable to connect. I copied all of the SSH keys over from the previous installation. I also tried deleting my ~/.ssh/known_hosts file and adding the key to ssh-agent with no success, but the key is definitely added correctly: $ ssh-add -l 1024 b9:3d:e5:ef:48:ea:fc:c6:6e:45:89:b5:35:e7:58:39 server.com_dsa (DSA) Note, if I enable password authentication on the server, I can connect fine, however I would like to use publickey. Any ideas how I can connect with public key authentication?

    Read the article

  • prevent domain controller using wpad for windows update

    - by BeowulfNode42
    We have a 2012 domain controller in an environment where we are running a web proxy auto discovery (WPAD) setup for client devices, and that proxy server requires authentication. However windows update does not support proxy servers requiring authentication. So we want to prevent windows update on our servers from using the WPAD proxy settings. On a domain member server we can log in to the local administrator account (not domain admin) and un-tick the the "Auto detect proxy settings" in IE internet options and that fixes the issue on those servers. But a domain controller does not have a local admin account, as that account is the domain admin account. Doing this to the domain admin account on the DC does not prevent it from using WPAD. Our whole purpose of running a proxy server that requires authentication is so we can identify what the users on our session based remote desktop servers are doing on the internet. See this MS KB Article for some info about Windows update and proxy servers "How the Windows Update client determines which proxy server to use to connect to the Windows Update Web site" - http://support.microsoft.com/kb/900935

    Read the article

  • Issue in extending webapplication sharepoint

    - by GHIYA
    I have extended a webapplication in a farm. main server vsmoss1 where i did vsmoss1 ->webapplication(80) vm.com -> extended web app(of above one)anonymous WFE server name vsmoss2 WFE server name vsmoss3 i have load balanced it to got to vsmoss2 and vsmoss3 when someone hits vm.com when i hit vm.com it works fine without authentication(shows content query webpart also on my page) I know there is no need to do that but when I hit vsmoss2 and vsmoss3 it shows me error on my content query webpart ....any solution for that? Finding this strange tried this : I closed both extended webapp in vsmoss2 and vsmoss3 result: site is up and running but this time with authentication I closed both extended and main webapplication site in vsmoss2 and vsmoss3 is down I closed main webapplication in vsmoss2 and vsmoss3 site is up and running without authentication Anyone is having idea why this is showing behaviour like this...?

    Read the article

  • FreeBSD 8.2 + Apache 2.2 + mod_auth_pam2: unable to authenticate

    - by zneak
    I've installed Apache 2.2 and mod_auth_pam2 from ports, but I can't get local UNIX authentication to work. When I access the protected part of my local website, I do get the authentication request, and with pam_permit.so, it works. However, when I change pam_permit.so to the real thing, pam_unix.so, I get this message in httpd-error.log: [error] PAM: user 'foo' - not authenticated: authentication error This is the relevant part of my Apache config, though I don't think it's the problem as it works with pam_permit.so: <Location /foo> AuthBasicAuthoritative Off AuthPAM_Enabled on AuthPAM_FallThrough off AuthType Basic AuthName "Secret place" Require valid-user </Location> This is my /etc/pam.d/httpd, though I don't think it's the problem either, since it works with pam_permit.so: auth required pam_unix.so account required pam_unix.so So what am I missing? What does it take to have pam_unix.so work for httpd under FreeBSD?

    Read the article

  • Authenticating AIX Users Against OID (Oracle Internet Directory)

    - by mwilkes
    We have a need to authenticate local users on an AIX server against OID using LDAP. We have a branch within OID where we've placed and synchronized Active Directory users. We've also configured external authentication on OID so that it verifies username/passwords against AD. Has anyone configured authentication for AIX in this type of environment? We believe we need to populate unix specific attributes on the user's directory entry in OID, but are unsure which attributes are needed. Additionally, we are looking to authenticate Oracle database users against OID but because of external authentication we are unable to populate the ORCLPASSWORD attribute on the user's directory entry on OID (which is the attribute Oracle is looking for password in). Help with either or both are welcome.

    Read the article

  • DKIM, SPF, PTR records are not working properly with my domain

    - by shihon
    I configured my server and well authenticate email system with DKIM key, SPF record and PTR records, when i start to sent out mails from phplist interface to my users ~50000, my domain is spammed by google. In headers, signed by and mailed by tag shows by my domain : appmail.co, I also test my domain via check mail provide by port25, report is: This message is an automatic response from Port25's authentication verifier service at verifier.port25.com. The service allows email senders to perform a simple check of various sender authentication mechanisms. It is provided free of charge, in the hope that it is useful to the email community. While it is not officially supported, we welcome any feedback you may have at . Thank you for using the verifier, The Port25 Solutions, Inc. team ========================================================== Summary of Results SPF check: pass DomainKeys check: neutral DKIM check: pass Sender-ID check: pass SpamAssassin check: ham ========================================================== Details: HELO hostname: app.appmail.co Source IP: 108.179.192.148 mail-from: [email protected] SPF check details: Result: pass ID(s) verified: [email protected] DNS record(s): appmail.co. SPF (no records) appmail.co. 14400 IN TXT "v=spf1 +a +mx +ip4:108.179.192.148 ?all" appmail.co. 14400 IN A 108.179.192.148 DomainKeys check details: Result: neutral (message not signed) ID(s) verified: [email protected] DNS record(s): DKIM check details: Result: pass (matches From: [email protected]) ID(s) verified: header.d=appmail.co Canonicalized Headers: content-type:multipart/alternative;'20'boundary=047d7b2eda75d8544d04c17b6841'0D''0A' to:[email protected]'0D''0A' from:shashank'20'sharma'20'<[email protected]>'0D''0A' subject:Test'0D''0A' message-id:<CADnDhbH9aDBk3Ho2-CrG7gwOoD6RNX0sFq4bWL64+kmo=9HjWg@mail.gmail.com>'0D''0A' date:Sat,'20'2'20'Jun'20'2012'20'16:44:50'20'+0530'0D''0A' mime-version:1.0'0D''0A' dkim-signature:v=1;'20'a=rsa-sha256;'20'q=dns/txt;'20'c=relaxed/relaxed;'20'd=appmail.co;'20's=default;'20'h=Content-Type:To:From:Subject:Message-ID:Date:MIME-Version;'20'bh=GS6uwlT+weKcrrLJ2I+cjBtWPq9nvhwRlNAJebOiQOk=;'20'b=; Canonicalized Body: --047d7b2eda75d8544d04c17b6841'0D''0A' Content-Type:'20'text/plain;'20'charset=UTF-8'0D''0A' '0D''0A' Hello'20'Senders'0D''0A' '0D''0A' --047d7b2eda75d8544d04c17b6841'0D''0A' Content-Type:'20'text/html;'20'charset=UTF-8'0D''0A' '0D''0A' Hello'20'Senders'0D''0A' '0D''0A' --047d7b2eda75d8544d04c17b6841--'0D''0A' DNS record(s): default._domainkey.appmail.co. 14400 IN TXT "v=DKIM1; k=rsa; p=MHwwDQYJKoZIhvcNAQEBBQADawAwaAJhALGCOdMeZRxRHoatH7/KCvI1CKS0wOOsTAq0LLgPsOpMolifpVQDKOWT2zq/6LHVmDVjXLbnWO2d4ry/riy7ei66pLpnAV5ceIUSjBRusI8jcF9CZhPrh/OImsKVUb9ceQIDAQAB;" NOTE: DKIM checking has been performed based on the latest DKIM specs (RFC 4871 or draft-ietf-dkim-base-10) and verification may fail for older versions. If you are using Port25's PowerMTA, you need to use version 3.2r11 or later to get a compatible version of DKIM. Sender-ID check details: Result: pass ID(s) verified: [email protected] DNS record(s): appmail.co. SPF (no records) appmail.co. 14400 IN TXT "v=spf1 +a +mx +ip4:108.179.192.148 ?all" appmail.co. 14400 IN A 108.179.192.148 SpamAssassin check details: SpamAssassin v3.3.1 (2010-03-16) Result: ham (-0.1 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 T_RP_MATCHES_RCVD Envelope sender domain matches handover relay domain 0.0 HTML_MESSAGE BODY: HTML included in message -0.5 BAYES_05 BODY: Bayes spam probability is 1 to 5% [score: 0.0288] -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature 0.5 SINGLE_HEADER_1K A single header contains 1K-2K characters ========================================================== Original Email Return-Path: <[email protected]> Received: from app.appmail.co (108.179.192.148) by verifier.port25.com id hp7qqo11u9cc for <[email protected]>; Sat, 2 Jun 2012 07:14:52 -0400 (envelope-from <[email protected]>) Authentication-Results: verifier.port25.com; spf=pass [email protected] Authentication-Results: verifier.port25.com; domainkeys=neutral (message not signed) [email protected] Authentication-Results: verifier.port25.com; dkim=pass (matches From: [email protected]) header.d=appmail.co Authentication-Results: verifier.port25.com; sender-id=pass [email protected] DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=appmail.co; s=default; h=Content-Type:To:From:Subject:Message-ID:Date:MIME-Version; bh=GS6uwlT+weKcrrLJ2I+cjBtWPq9nvhwRlNAJebOiQOk=;b=pNw3UQNMoNyZ2Ujv8omHGodKVu/55S8YdBEsA5TbRciga/H7f+5noiKvo60vU6oXYyzVKeozFHDoOEMV6m5UTgkdBefogl+9cUIbt5CSrTWA97D7tGS97JblTDXApbZH; Received: from mail-pb0-f46.google.com ([209.85.160.46]:57831) by app.appmail.co with esmtpa (Exim 4.77) (envelope-from <[email protected]>) id 1SamIF-00055f-Om for [email protected]; Sat, 02 Jun 2012 16:44:51 +0530 Received: by pbbrp8 with SMTP id rp8so4165728pbb.5 for <[email protected]>; Sat, 02 Jun 2012 04:14:51 -0700 (PDT) MIME-Version: 1.0 Received: by 10.68.216.33 with SMTP id on1mr19414885pbc.105.1338635690988; Sat, 02 Jun 2012 04:14:50 -0700 (PDT) Received: by 10.143.66.13 with HTTP; Sat, 2 Jun 2012 04:14:50 -0700 (PDT) Date: Sat, 2 Jun 2012 16:44:50 +0530 Message-ID: <CADnDhbH9aDBk3Ho2-CrG7gwOoD6RNX0sFq4bWL64+kmo=9HjWg@mail.gmail.com> Subject: Test From: shashank sharma <[email protected]> To: [email protected] Content-Type: multipart/alternative; boundary=047d7b2eda75d8544d04c17b6841 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - app.appmail.co X-AntiAbuse: Original Domain - verifier.port25.com X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - appmail.co --047d7b2eda75d8544d04c17b6841 Content-Type: text/plain; charset=UTF-8 Hello Senders --047d7b2eda75d8544d04c17b6841 Content-Type: text/html; charset=UTF-8 Hello Senders --047d7b2eda75d8544d04c17b6841-- I also tried to send mail on yahoo , rediff but i get mails in spam. Please help me to sort out this issue

    Read the article

  • Down for everyone or just me?

    - by Click Ok
    When I try access a website, and it is down, I head to http://www.downforeveryoneorjustme.com, and test it. But lately, my home network PCs cannot access facebook.com, and I tried the that service and the answer was: It's just you. http://facebook.com is up. Ok, that got me. I tried several browsers and 3 PCs in my LAN and it don't works. I don't know how to troubleshoot this. What some step-by-step to troubleshoot that problem? Output from ping command: Disparando facebook.com [69.171.234.21] com 32 bytes de dados: Resposta de 69.171.234.21: bytes=32 tempo=256ms TTL=245 Resposta de 69.171.234.21: bytes=32 tempo=255ms TTL=246 Resposta de 69.171.234.21: bytes=32 tempo=251ms TTL=245 Resposta de 69.171.234.21: bytes=32 tempo=255ms TTL=246 PS.: I thank you for the nice help, but then I suppose that the first step of a step-by-step to troubleshoot is ping from command line?

    Read the article

  • http proxy caching headers

    - by David Hagan
    I have a service for which I'm about to upgrade the authentication. However, I'm trying to ensure that I make the right decision about where the encryption algorithms occur. I currently have two options: option 1) the authentication module is deployed to the client as a javascript library over https and executes client-side, so that the client can POST back an encrypted string. option 2) the authentication module is kept server-side so that the client need only POST back an unencrypted string. I know that many http proxies cache/log the query-string (and therefore any query parameters), but does anyone know of any http proxies that cache the headers as well? If the headers are being cached, then I'll clearly want to encrypt the password inside the SSL encryption, because to my understanding the headers of an HTTPS request may not always be encrypted (depending on the capabilities of the browser etcetera). Can anyone shed any light on the caching of headers by http proxies? Do you have one that does, or know of one that does?

    Read the article

  • unwanted password prompt pops up on web server?

    - by Paul
    my web server randomly asks for a password as though basic authentication is turned on. It's an IIS 7 web server and you have to specifically install basic authentication in the roles section. It isn't installed. The message that pops up is "Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentication without a secure connection)" I cannot reproduce the problem but a number of customers have reported the problem and it only seems to appear to a small number of customers. It pops up when they visit the homepage, nothing is generated by the IIS logs to indicate a password box is being served (e.g. no 401 errors etc) Can anyone offer any advice? Thanks

    Read the article

< Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >