Search Results

Search found 41025 results on 1641 pages for 'in memory database'.

Page 175/1641 | < Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >

• passenger and apache memory usage

  - by Brent Faulkner

  On a "CentOS release 6.2 (Final)" server (with Ruby 1.9.3 and Rails 3.2), and using more memory than expected. Looking at passenger-memory-stats I see a couple of HUGE httpd processes... any thoughts on how I can figure out what's going on and reduce the memory usage? Stats are included here... thanks! ---------- Apache processes ----------- PID PPID VMSize Private Name --------------------------------------- 1371 1 202.1 MB 0.1 MB /usr/sbin/httpd 4573 1371 210.2 MB 5.0 MB /usr/sbin/httpd 4778 1371 202.5 MB 0.6 MB /usr/sbin/httpd 4780 1371 217.6 MB 9.4 MB /usr/sbin/httpd 4781 1371 217.1 MB 9.1 MB /usr/sbin/httpd 4856 1371 202.4 MB 0.5 MB /usr/sbin/httpd 4863 1371 204.1 MB 2.1 MB /usr/sbin/httpd 5027 1371 202.4 MB 0.5 MB /usr/sbin/httpd 5043 1371 202.4 MB 0.4 MB /usr/sbin/httpd 5044 1371 205.5 MB 2.7 MB /usr/sbin/httpd 5072 1371 202.4 MB 0.5 MB /usr/sbin/httpd 5084 1371 202.4 MB 0.5 MB /usr/sbin/httpd 32111 1371 1297.0 MB 246.5 MB /usr/sbin/httpd 32579 1371 1914.3 MB 215.5 MB /usr/sbin/httpd ### Processes: 14 ### Total private dirty RSS: 493.42 MB -------- Nginx processes -------- ### Processes: 0 ### Total private dirty RSS: 0.00 MB ----- Passenger processes ----- PID VMSize Private Name ------------------------------- 4180 280.5 MB 24.4 MB Passenger ApplicationSpawner: /var/www/apps/people/current 4345 309.5 MB 53.4 MB Rack: /var/www/apps/people/current 4800 300.2 MB 55.2 MB Rack: /var/www/apps/people/current 4808 297.8 MB 52.5 MB Rack: /var/www/apps/people/current 4815 297.4 MB 52.4 MB Rack: /var/www/apps/people/current 4822 302.7 MB 55.6 MB Rack: /var/www/apps/people/current 22780 209.0 MB 0.0 MB PassengerWatchdog 22783 991.5 MB 1.3 MB PassengerHelperAgent 22785 113.4 MB 1.1 MB Passenger spawn server 22788 144.6 MB 0.0 MB PassengerLoggingAgent 22911 310.4 MB 64.0 MB Rack: /var/www/apps/people/current 22939 311.6 MB 53.5 MB Rack: /var/www/apps/people/current 26175 304.1 MB 55.8 MB Rack: /var/www/apps/people/current 26182 310.4 MB 44.0 MB Rack: /var/www/apps/people/current ### Processes: 14 ### Total private dirty RSS: 513.24 MB

  Read the article

• Nginx Multiple If Statements Cause Memory Usage to Jump

  - by Justin Kulesza

  We need to block a large number of requests by IP address with nginx. The requests are proxied by a CDN, and so we cannot block with the actual client IP address (it would be the IP address of the CDN, not the actual client). So, we have $http_x_forwarded_for which contains the IP which we need to block for a given request. Similarly, we cannot use IP tables, as blocking the IP address of the proxied client will have no effect. We need to use nginx to block the requested based on the value of $http_x_forwarded_for. Initially, we tried multiple, simple if statements: http://pastie.org/5110910 However, this caused our nginx memory usage to jump considerably. We went from somewhere around a 40MB resident size to over a 200MB resident size. If we changed things up, and created one large regex that matched the necessary IP addresses, memory usage was fairly normal: http://pastie.org/5110923 Keep in mind that we're trying to block many more than 3 or 4 IP addresses... more like 50 to 100, which may be included in several (20+) nginx server configuration blocks. Thoughts? Suggestions? I'm interested both in why memory usage would spike so greatly using multiple if blocks, and also if there are any better ways to achieve our goal.

  Read the article

• Can’t connect to SQL Server 2008 - looks like Shared Memory problem

  - by Proposition Joe

  I am unable to connect to my local instance of SQL Server 2008 Express using SQL Server Management Studio. I believe the problem is related to a change I made to the connection protocols. Before the error occurred, I had Shared Memory enabled and Named Pipes and TCP/IP disabled. I then enabled both Named Pipes and TCP/IP, and this is when I started experiencing the problem. When I try to connect to the server with SSMS (with either my SQL server sysadmin login or with windows authentication), I get the following error message: A connection was successfully established with the server, but then an error occurred during the login process. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233) Why is it returning a Named Pipes error? Why would it not just use Shared Memory, as this has a higher priority order in the list of connection protocols? It seems like it is not listening on Shared Memory for some reason? When I set Named Pipes to enabled and try to connect, I get the same error message. My windows account is does not have administrator priviliges on my computer - perhaps this is making a difference in some way (as some of the discussions in this post about an "SuperSocketNetLib\Lpc" registry key seems to suggest). I have tried restarting the SQL Server service, by the way, and also tried to get someone to log onto the machine with an admin account to restart the SQL Server service. Still no luck.

  Read the article

• Can’t connect to SQL Server 2008 - looks like Shared Memory problem

  - by user38556

  I am unable to connect to my local instance of SQL Server 2008 Express using SQL Server Management Studio. I believe the problem is related to a change I made to the connection protocols. Before the error occurred, I had Shared Memory enabled and Named Pipes and TCP/IP disabled. I then enabled both Named Pipes and TCP/IP, and this is when I started experiencing the problem. When I try to connect to the server with SSMS (with either my SQL server sysadmin login or with windows authentication), I get the following error message: A connection was successfully established with the server, but then an error occurred during the login process. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233) Why is it returning a Named Pipes error? Why would it not just use Shared Memory, as this has a higher priority order in the list of connection protocols? It seems like it is not listening on Shared Memory for some reason? When I set Named Pipes to enabled and try to connect, I get the same error message. My windows account is does not have administrator priviliges on my computer - perhaps this is making a difference in some way (as some of the discussions in this post about an "SuperSocketNetLib\Lpc" registry key seems to suggest). I have tried restarting the SQL Server service, by the way, and also tried to get someone to log onto the machine with an admin account to restart the SQL Server service. Still no luck.

  Read the article

• Idle VMware Guests Resource Consumption

  - by Ravenor

  I want to setup a number of guests with multiple CPUs (4) and at least 4Gb ram running Ubuntu Linux. These machines will mostly be idle, but from time to time their workload will require all their resources, especially the CPU. The hosts are ESXi 5.x. The question is, am I right in thinking that the resource consumption of the machines when idle will be negligible? We know this true of disk and the CPU. The only concern left therefore is memory. Since ESX over-commits memory it makes sense that unused memory of any guest is paged out. If my thinking correct?

  Read the article

• Is putting the swapfile & temp folder to ramdisk a good idea in Windows 7 64 bit with lots of RAM?

  - by Tony_Henrich

  I want my Windows to run as fast as possible. If I have 12GB RAM in Windows 7 64bit, quad core CPU, and all apps fit in memory, will the swap file ever be used for anything? The question is about if it's a good idea to put the swap file in a RAM disk. Would a RAM disk help in any way or will Windows intelligently use all the available memory for all its work? I am also thinking of putting the temp folder on a RAM disk. I know the RAM disk is volatile memory and I don't care about its content if it gets lost.

  Read the article

• Win 7 accessing large files uses 100% RAM

  - by user181276

  Running Win 7 64-bit SP1 with 8 GB RAM. I first noticed this problem when using the GUI to copy some large (5+ GB) files from one disk to another. What happens is the physical memory in use rises quite quickly to 100% and the system comes to a crawl. If I just start to access the file in a media player (it is a movie) the memory usage climbs up slowly but eventually reaches 100%. When copying the same files via XCOPY I do not have this problem. Using RAMMAP I see most of the memory usage is under "Mapped File" and is allocated under the "Active" column. If I select "Empty System Working Set" the RAM usage drops back down but then starts to climb back up. Any ideas on what I can check/test to eliminate this issue?

  Read the article

• How does RAM fail?

  - by ethanlee16

  I have an issue with a Dell Inspiron 15 (1545) laptop that refuses to open any applications (save select Microsoft programs, e.g. Security Essentials, Ctrl Panel, Windows Explorer (not Internet), regedit, Event Viewer, etc.). I've run Microsoft Memory Diagnostics Tool and it found a 'hardware problem was detected.' Does this indicate that the RAM has failed? I notice when I open programs like Word, Excel, Internet Explorer, etc., it always give me an error from WerFault.exe saying The instruction at xxxxxxx referenced memory at xxxxxxxxx. The memory could not be written. and sometimes something about illegal instructions. If it is a hardware problem, does this mean that replacing the RAM is my only option? Again, I would also like to know if RAM can fail (like hard drives) and if malware can cause RAM to fail also.

  Read the article

• Apparent leak in Mozilla Firefox

  - by LeopardSkinPillBoxHat

  I use Mozilla Firefox 3.6 all day, opening and closing tabs quite regularly. I am noticing over time that the firefox.exe process size keeps growing and growing over time. Initially I put this down to memory fragmentation caused by opening and closing tabs, but now I am suspecting that there is a memory leak in one of the add-ons that I have installed. The problem I am seeing is that when the process size gets to about 1.5GB in the "Mem Usage" stat in Task Manager (and it gets there quite regularly), Firefox freezes up. Does anyone have any ideas about how I could diagnose whether: Any of the add-ons are leaking memory? Something else is causing this problem?

  Read the article

• how do applications (and OS) handle very big files?

  - by DrStrangeLove

  For instance, i have video file which is 11.8 Gb, but my RAM memory only 2 Gb.. How does VLC (or other software) handle it? How do they load it into memory? I used VMMap tool (from sysinternals) to take a look at memory, and i saw: private 160000K working set 100000K Obviously, it's much less than 11.8 Gb -So how did it happen? This question is not only about video. I'd like to know how computer, in general, handles very large files.

  Read the article

• CPU I/O communication

  - by b-gen-jack-o-neill

  Hi, I know there is this question already discussed, but I still don´t understand something, so please just help me clarify it. What I understand there is 2 way to do I/O aka communicate from CPU with other HW. One is to use in and out instructions, and second is the memory mapped. But what I don´t actually understand is, is IN and OUT instructions are used, you define source port. But what is this port? I mean, is it different set of pins on CPU or what? And, to what is that port connected? And for the memory mapped, I miss just a tiny detail. Wheather memory mapped I/O must be first set by IN and OUT instructions, or does the device actually somehow itself connects to the RAM and reads it? Thanks.

  Read the article

• Windows hangs on Rename, Delete and Move for specific MKV files

  - by Creativehavoc

  I have been googling this issue for a long time, and no full solutions seem to be out there. For certain mkv files, windows hangs when moving, copying, or deleting. These files play fine in a player such as GOM player. System: a fast windows 7, 64 bit box. Results: CPU change is negligible Memory usage rockets up to ~100% In cased of delete or move, "discovering files" dialogue box stays up for a long time Rename simply shows spinning icon until it finishes Action is completed after EXTREMELY long amount of time Memory usage does not return to normal "Fixes:" Disable thumbnail creation (helps for some cases) After move/rename/delete kill explorer with taskmanager, and relaunch to re-claim your memory Even with the thumbnails turned off, the issue persists. I have also tried re-muxing a file, which worked fine, but still resulted in a file with the same above issues.

  Read the article

• Computer freezes for 2+ seconds, mouse still moves

  - by xsaero00

  I have this problem on my workstation. The computer would effectively freeze for 2-5 seconds for no apparent reason, then continue as normal. While frozen the mouse would still be movable, but only on one of screens in my multi-screen setup. What can be the likely cause. System: CPU: i7-920 Memory: 12G of Patriot DDR3, 6 modules OS: SLED 11, Suse Linux Enterprise Desktop, using Gnome Main board: Asus P6T Video: two Nvidia 9500GT connected to three displays I am using memory at recommended settings of 8-8-8-1333. It has an XMP profile. Th CPU is a bit overclocked to 3.3 GHz, but my cooling more than allows for it. I ran the computer with all overclocks off and lower memory speed but the issue was still there. Any ideas? Where should I start looking?

  Read the article

• How to check if PAE is enabled? (Windows 7 32 bits)

  - by Altar

  How to tell for sure if PAE (Physical Address Extensions) is enabled or not? There is a SPECIFIC command I can use? I can read a registry value or something? (Windows 7 32 bits) I have found this on Internet but it doesn't answer my question: If your server has hot-add memory ability (ability to add more memory without shutting down the server !!) or data execution prevention (DEP) is enabled then PAE will be enabled automatically !! It only reformulate the question as "does my Qosmio x505 laptop support hot-add memory?"

  Read the article

• RAM module randomly stopped working

  - by nhinkle

  My laptop is a Dell Inspiron e1505. It came with 2x512 MB of RAM installed, and about a year and a half ago I decided to upgrade it to 2x1 GB. I bought two 1GB memory modules from newegg and installed them, and all worked fine. Just last night my laptop was working fine; this morning I booted up and there was a BIOS warning saying "amount of system memory has changed". I tried reseating the modules, but that didn't fix it. Then I removed each one individually, and determined that one of the sticks appears to no longer be working. This happened very abruptly - I hadn't noticed any problems which might have been indicative of impending failure. Does anybody have any clue what may have caused this, and if there's any hope of making it work again? The memory only had a 30 day warranty, so I can't RMA it.

  Read the article

• How to prevent HP Photosmart Essential from launching on removal drive insertion

  - by David Boike

  My in-laws bought an HP computer loaded with HP junk, and it's giving me a headache. When they insert a camera memory card into their printer, the Auto-Play dialog comes up, but it also launches the HP Photosmart Essential application, which is a piece of trash. It will NOT launch properly just normally from the taskbar, so that makes it pretty useless. I tried uninstalling it, but then when you insert a memory card, a Microsoft Help window comes up saying how to reinstall HP Photosmart Essential!! Is there any way to find the registry key (I assume) that allows a program to be launched when a memory card is inserted?

  Read the article

• Compilation of Etherpad fails in an OpenVZ VE

  - by ulf

  Hi everyone. I’m almost giving up, this will be my last try: I try to compile Etherpad on my OpenVZ server. It’s running a Debian 5.0 as the host system, in the VE I’ve got Ubuntu 10.04. I installed Etherpad in this VE with the instructions from the official Ubuntu Wiki: https://wiki.ubuntu.com/Etherpad. Everything runs fine until it comes to compilation. After calling bin/build.sh as described in the wiki the first steps are running fine. But then I’m running into a memory error: java.io.IOException: Cannot run program "cp": java.io.IOException: error=12, Cannot allocate memory Well, I understand the error message but don’t see the cause. The command free tells me that there’s plenty memory left in this VE: total used free shared buffers cached Mem: 2415236 1140872 1274364 0 0 0 -/+ buffers/cache: 1140872 1274364 Swap: 0 0 0 Beautiful. But even repeating the compilation process doesn’t bring me any further. Any help would be appreciated.

  Read the article

• Weird RAM Upgrade Experience

  - by Axel Isouard

  I have a laptop, HP EliteBook 8540p having originally 4GB RAM and I've recently bought Corsair Value Select SO-DIMM 16 Go (2x 8 Go) DDR3 1333 MHz. It fits the required RAM specifications perfectly, and once I've inserted them, the BIOS recognizes the memory correctly, but my linux Gentoo running on kernel 3.1.6 SMP x86_64 crashes immediately when I'm running an app which consumes a lot of memory. The laptop crashes as if there's no more battery left, when the memory reaches at least 6000MB ram. Windows 7 doesn't want to run anymore, it shows a blue screen with the IRQ LESS OR EQUAL error if I set 8GB, and it doesn't boot at all if I set 16GB. Is there something I could do to fix this please ?

  Read the article

• Windows 7 pagefile size with large RAM and SSD

  - by Avi

  I've just upgraded my Windows 7 machine from 12GB to 24GB - both for running more VMs and for future proofing. My C driver is an SSD with 129GB formatted size. I was surprised to find out that the SSD only has 68GB free (most of my files are on D: to G:). Researching I found 24GB of my precious C: SSD are taken for virtual memory. So - do I need such large amounts of virtual memory when I have 24GB or RAM? I bought this size of memory so I"d not have to go to disk...

  Read the article

• Is putting swapfile & temp folder in ramdisk a good idea in Windows 7 64 bit with lots of ram?

  - by Tony_Henrich

  I want my Windows to run as fast as possible. If I have 12GB ram in Windows 7 64bit, quad core cpu, and all apps fit in memory, will the swap file ever be used for anything? The question is about if its a good idea to put the swap file in a ram disk. Would a ram disk help in any way or will Windows intelligently use all the available memory for all its work? I am also thinking of putting the temp folder in a ram disk. I know ram disk is volatile memory and I don't care about its content in it if it gets lost.

  Read the article

• Why is RAM usage so high on an idle server? [duplicate]

  - by DeeDee

  This question already has an answer here: Why is Linux reporting “free” memory strangely? 2 answers I'm investigating a server used for scientific data analysis. It's running RHEL 6.4 It has almost 200GB of RAM. It's been running very slowly for users via SSH, and after some poking around I quickly noticed that the RAM usage was sky-high. What's odd is that even in an idle state it's still using a ton of RAM: I also looked via htop and I can't see that any running process is using more than 0.1% of the RAM. So I wonder what's going on? Right now the only user-initiated process running is an rsync between two NFS-mounted shares. I tried rebooting the server and it was much more responsive for a few minutes, but then memory usage shot up again. Is there any way I can pinpoint why memory usage is so high?

  Read the article

• handling long running large transactions with perl dbi

  - by 1stdayonthejob

  I've got a large transaction comprising of getting lots of data from database A, do some manipulations with this data, then inserting the manipulated data into database B. I've only got permissions to select in database A but I can create tables and insert/update etc in database B. The manipulation and insertion part is written in perl and already in use for loading data into database B from other data sources, so all that's required is to get the necessary data from database A and using it to initialize the perl classes. How can I go about doing this so I can easily track back and pick up from where the error happened if any error occurs during the manipulation or insertion procedures (database disconnection, problems with class initialization because of invalid values, hard disk failure etc...)? Doing the transaction in one go doesn't seem like a good option because the amount data from database A means it would take at least a day or 2 for data manipulation and insertion into database B. The data from database A can be grouped into around 1000 groups using unique keys, with each key containing 1000s of rows each. One way I thought I could do is to write a script that does commits per group, meaning I've got to track which group has already been inserted into database B. The only way I can think of to track the progress of which groups have been processed or not is either in a log file or in a table in database B. A second way I thought could work is to dump all the necessary fields needed for loading the classes for manipulation and insertion into a flatfile, read the file to initialize the classes and insert into database B. This also means that I got to do some logging, but should narrow it down to the exact row in the flatfile if any error occurs. The script will look something like this: use strict; use warnings; use DBI; #connect to database A my $dbh = DBI->connect('dbi:oracle:my_db', $user, $password, { RaiseError => 1, AutoCommit => 0 }); #statement to get data based on group unique key my $sth = $dbh->prepare($my_sql); my @groups; #I have a list of this already open my $fh, '>>', 'my_logfile' or die "can't open logfile $!"; eval { foreach my $g (@groups){ #subroutine to check if group has already been processed, either from log file or from database table next if is_processed($g); $sth->execute($g); my $data = $sth->fetchall_arrayref; #manipulate $data, then use it to load perl classes for insertion into database B #. #. #. } print $fh "$g\n"; }; if ($@){ $dbh->rollback; die "something wrong...rollback"; } So if any errors do occur, I can just run this script again and it should skip the groups or rows that have been processed and continue. Both these methods is just variations on the same theme, and both require going back to where I've been tracking my progress (in table or file), skip the ones that've been commited to database B and process the remaining data. I'm sure there's a better way of doing this but am struggling to think of other solutions. Is there another way of handling large transactions between databases that require data manipulation between getting data out from one and inserting into another? The process doesn't need to be all in Perl, as long as I can reuse the perl classes for manipulating and inserting the data into the database.

  Read the article

• Does OSB has any database dependency?

  - by Manoj Neelapu

  Major functionality of OSB is database independent. Most of the internal data-structures that re required by OSB are stored in-memory.Reporting functionality of OSB requires DB tables be accessible.http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15017/before.htm#BABCJHDJ It should hover be noted that we can still run OSB with out creating any tables on database.In such cases the reporting functionality cannot be used where as other functions in OSB will work just as fine.We also see few errors in the log file indicating the absence of these tables which we can ignore.  If reporting function is required we will have to install few tables. http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15017/before.htm#BABBBEHD indicates running RCU recommended. OSB reporting tables are bundled along with SOA schema in RCU. OSB requires two simple tables for reporting functionality and installing complete SOA schema is little far fetched. SOA schema contains lot of tables which OSB doesn't require at all. More over OSB tables are too simple to require a tool like an RCU.Solution to it would be to manually create those tables required for OSB. To make  life easier the definition of tables is available in dbscripts folder under OSB_HOME.eg. D:\Oracle\Middleware\osb\11gPS2\Oracle_OSB1\dbscripts. $OSB_HOME=D:\Oracle\Middleware\osb\11gPS2\Oracle_OSB1If you are not planning to use reporting feature in OSB, then we can also delete the JDBC data sources that comes along with standard OSB domain.WLST script to delete cgDataSources from OSB domain . OSB will work fine with out DB tables and JDBC Datasource.

  Read the article

• Power Dynamic Database-Driven Websites with MySQL & PHP

  - by Antoinette O'Sullivan

  Join major names among MySQL customers by learning to power dynamic database-driven websites with MySQL & PHP. With the MySQL and PHP: Developing Dynamic Web Applications course, in 4 days, you learn how to develop applications in PHP and how to use MySQL efficiently for those applications! Through a hands-on approach, this instructor-led course helps you improve your PHP skills and combine them with time-proven database management techniques to create best-of-breed web applications that are efficient, solid and secure. You can currently take this course as a: Live Virtual Class (LVC): There are a number events on the schedule to suit different timezones in January 2013 and March 2013. With an LVC, you get to follow this live instructor-led class from your own desk - so no travel expense or inconvenience. In-Class Event: Travel to an education center to attend this class. Here are some events already on the scheduled:  Where  When  Delivery Language  Lisbon, Portugal  15 April 2013  European Portugese  Porto, Portugal 15 April 2013   European Portugese  Barcelona, Spain 28 February 2013  Spanish  Madrid, Spain 4 March 2013   Spanish If you do not see an event that suits you, register your interest in an additional date/location/delivery language. If you want more indepth knowledge on developing with MySQL and PHP, consider the MySQL for Developers course. For full details on these and all courses on the authentic MySQL curriculum, go to http://oracle.com/education/mysql.

  Read the article

• How to Clean Up and Fix Your Music Library with the MusicBrainz Database

  - by Erez Zukerman

  Over the years, some of us accumulate lots and lots of music files. Since these come from a variety of sources, they’re not always as neat as they could be. If your music library is in a bit of a jumble with tags missing, oddly named files and incomplete albums, read on to see how easy it is to make it neat once and for all. MusicBrainz is an online database that uses audio “fingerprints” to identify music tracks even when they’re incorrectly labelled. We’ll be using this database through a free client called Picard, available for Windows, Mac OS X and Linux. So first thing, head on over to Picard’s download page and get the installer. If you use Linux, you can install Picard using your package manager. Once you finish going through the installer, run Picard. Your firewall might pop up an alert telling you Picard is trying to access the Internet; you should agree to let Picard through. You will now see the main Picard interface. Click View > File browser (or press Ctrl+B). Latest Features How-To Geek ETC Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions Awesome 10 Meter Curved Touchscreen at the University of Groningen [Video] TV Antenna Helper Makes HDTV Antenna Calibration a Snap Turn a Green Laser into a Microscope Projector [Science] The Open Road Awaits [Wallpaper] N64oid Brings N64 Emulation to Android Devices Super-Charge GIMP’s Image Editing Capabilities with G’MIC [Cross-Platform]

  Read the article

< Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >