Search Results

Search found 14923 results on 597 pages for 'settings bundle'.

Page 175/597 | < Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >

• Wired and Wireless Network Issues with PPPoE

  - by user9054

  down vote favorite Hi Friends, I have got this issue with Ubuntu 10.10. I have been with ubuntu 8.04 and then decided to try out ubuntu 10.10 . I booted with a LiveCD and was able to configure the wireless network painlessly using the livecd. So happily i installed ubuntu 10.10. As soon as ubuntu came up it detected the wireless network and i was able to assign a static IP to eth1 (i dont use DHCP option on my ADSL router) and enter a wap key and use pppoeconf to configure the dialer. The net was on and i was able to surf the net. All hunky dory so far. However on the next boot the fun started. It did not detect the wireless network. I could not see the network manager icon in the systray. I used ifconfig and saw that the entry for eth1 was missing. I used ifup eth1 and it said that eth1 was already up . Then i installed wifi-radar. Wifi-Radar detected the wireless network. I configured wifi-radar for the detected wireless network , set the wap driver as wext and used the manual IP settings. However on clicking connect wifi-radar started looking for a DHCP IP , needless to say it failed. For the love of god i cannot understand why wifi-radar is using DHCP when i have specified manual settings . Next i decided to use the wired network to surf the net looking for a solution . So i plugged in the network cable from my modem , it detected the plugged in connection , i configured eth0 , used pppoeconf and connected to the net. Then i foolishly decided to reboot my PC. And wonders of wonders , the same problem appeared. I cannot see eth0 in my ifconfig anymore. I used pon to start the dsl-provider connection and it said something about network error or something . Now my ifconfig shows only lo , both eth0 and eth1 have disappeared. Can anybody help me on this ? Is it a problem with ipv6 , if so how do you disable ipv6 on ubuntu 10.10 ? OR is this is a known issue with ubuntu 10.10 ? PS : 1) i tried linux mint 10 and had the same issue. On rebooting wireless network was not getting detected . 2) i have made myself the administrator so that there is no issue of rights or anything. Any help is appreciated.

  Read the article

• Lost network interface after mac change

  - by Arturo Grc

  I'm using Ubuntu server 12.04 inside Virtualbox and everything was working as expected, but since I changed the mac address in Virtualbox network settings the network interface is not being recognized on Ubuntu. I don't remember the old mac address and everytime Ubuntu starts shows waiting for network configuration when I use ifconfig only appears lo (loopback device) and eth0 is lost, how can I fix this problem?

  Read the article

• Oracle Enterprise Manager Cloud Control 12c Release 2 (12.1.0.2) is Available Now !

  - by Anand Akela

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Oracle today announced the availability of Oracle Enterprise Manager Cloud Control 12c Release 2 (12.1.0.2). It is now available for download on OTN on ALL platforms. This is the first major release since the launch of Enterprise Manager 12c in October of 2011. This is the first time when Enterprise Manager release is available on all platforms simultaneously. This is primarily a stability release which incorporates many of issues and feedback reported by early adopters. In addition, this release contains many new features and enhancements in areas across the board. New Capabilities and Features Enhanced management capabilities for enterprise private clouds: Introduces new capabilities to allow customers to build and manage a Java Platform-as-a-Service (PaaS) cloud based on Oracle Weblogic Server. The new capabilities include guided set up of PaaS Cloud, self-service provisioning, automatic scale out and metering and chargeback. Enhanced lifecycle management capabilities for Oracle WebLogic Server environments: Combining in-context multiple domain, patching and configuration file synchronizations. Integrated Hardware-Software management for Oracle Exalogic Elastic Cloud through features such as rack schematics visualization and integrated monitoring of all hardware and software components. The latest management capabilities for business-critical applications include: Business Application Management: A new Business Application (BA) target type and dashboard with flexible definitions provides a logical view of an application’s business transactions, end-user experiences and the cloud infrastructure the monitored application is running on. Enhanced User Experience Reporting: Oracle Real User Experience Insight has been enhanced to provide reporting capabilities on client-side issues for applications running in the cloud and has been more tightly coupled with Oracle Business Transaction Management to help ensure that real-time user experience and transaction tracing data is provided to users in context. Several key improvements address ease of administration, reporting and extensibility for massively scalable cloud environments including dynamic groups, self-updateable monitoring templates, bulk operations against many events, etc. New and Revised Plug-Ins: Several plug-Ins have been updated as a part of this release resulting in either new versions or revisions. Revised plug-ins contain only bug-fixes and while new plug-ins incorporate both bug fixes as well as new functionality. Plug-In Name Version Enterprise Manager for Oracle Database 12.1.0.2 (revision) Enterprise Manager for Oracle Fusion Middleware 12.1.0.3 (new) Enterprise Manager for Chargeback and Capacity Planning 12.1.0.3 (new) Enterprise Manager for Oracle Fusion Applications 12.1.0.3 (new) Enterprise Manager for Oracle Virtualization 12.1.0.3 (new) Enterprise Manager for Oracle Exadata 12.1.0.3 (new) Enterprise Manager for Oracle Cloud 12.1.0.4 (new) Installation and Upgrade: All major platforms have been released simultaneously (Linux 32 / 64 bit, Solaris (SPARC), Solaris x86-64, IBM AIX 64-bit, and Windows x86-64 (64-bit) ) Enterprise Manager 12.1.0.2 is a complete release that includes both the EM OMS and Agent versions of 12.1.0.2. Installation options available with EM 12.1.0.2: User can do fresh Install or an upgrade from versions EM 10.2.0.5, 11.1, or 12.1.0.2 ( Bundle Patch 1 not mandatory). Upgrading to EM 12.1.0.2 from EM 12.1.0.1 is not a patch application (similar to Bundle Patch 1) but is achieved through a 1-system upgrade. Documentation: Oracle Enterprise Manager Cloud Control Introduction Document provides a broad overview of capabilities and highlights"What's New" in EM 12.1.0.2. All updated Oracle Enterprise Manager documentation can be found on OTN Upgrade Guide Please feel free to ask questions related to the new Oracle Enterprise Manager Cloud Control 12c Release 2 (12.1.0.2) at the Oracle Enterprise Manager Forum . You could also share your feedback at twitter  using hash tag #em12c or at Facebook . Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

  Read the article

• How do I get the same dual-screen experience on my install as I had on the 12.04 Live CD?

  - by Alexander G

  I downloaded, burned to disc, and booted Ubuntu 12.04 Precise (I defected to Arch for a year when I got fed up of Natty). I was pleasantly surprised by both of my monitors working perfectly on there (needed to rearrange as my secondary monitor is to the left, however). So I installed. There's no recognition of the second monitor now, and it doesn't appear in the settings. I've also enabled the Nvidia driver. What do I do?

  Read the article

• Freeze after 'init-bottom' script before installation starts on a Lenovo G475

  - by NikitaBaksalyar

  I'm trying to install Ubuntu 11.04 x86 on a Lenovo G475 laptop (based on AMD Fusion), but installation freezes after loading ends on a splash screen. I've tried to run installation without quiet and splash parameters - but result is the same: installation freeze after running "init-bottom" script. I thought that it can be because of BIOS settings, but I've also tried to change them several times without any result.

  Read the article

• Editing /.config/dconf/user

  - by user86322

  I am having a problem with Gnome3 (actually, I have it set to fallback mode, or Gnome 2). I have two displays and I need an X screen (I used nvidia-xconfig and nvidia-settings to do this) for each screen. However, every time I either restart X or log in, Gnome seems to be adding the objects values under /gnome/gnome-panel/layouts (ex. first time I set the two separate X screens I had clock, then log out/in, there was clock and clock1 under objects, and then log out/in there were three, clock, clock1, clock2,.......log out/in, ............30 times....clock, clock1, clock2, ......clock 42.....!! The same thing goes for top-panels, menu-bars, etc.) After a while, I found out I could remove all those using the dconf-editor, going to /gnome/gnome-panel/layouts, removing all the repetitions under fields objects-id-list and top-id-list and leaving one value of each object. This is not a solution but at least allow me to keep using Linux without so much problem. However, the problem persists every time I restart X or log in. I now finally learned about "dconf" and where the user profile settings are located (~/.config/dconf/user) and one can use "dconf" to see the keys. In my case, I need to change/remove many keys (all those clocksX, workspace-X, menu-bar-X, etc., where goes from 1 to 42 and still counting) so it's really tedious and boring to be changing one by one using "dconf write". So I found "dconf dump", which actually allow me to dump everything into a .txt file and edit the file really quick (i.e, "dconf dump / >> dump_user.txt"). The problems? Two of them: How do I "load" back "dump_user.txt" I edited into the user profile? (I read somewhere there was a "dconf reload" but reload doesn't exist as a command under "dconf") How do I stop Gnome from keep adding more objects to my desktop environment every time I log in/restart X? NOTE: The problem doesn't occur when I set the displays to use TwinView feature (i.e., the desktop is extended/shared by both displays). However, for my case I need two separate X's. Any help/suggestion would be greatly appreciated. Thanks

  Read the article

• Speakers doesn't work properly on Ubuntu 12.10 but works fine on windows7

  - by giri

  I have recently upgraded my Ubuntu 12.04 to 12.10 version and find issues with my speakers as well as microphone.When I boot the system they doesn't work, but(don't know why) when I restart once or twice they work fine.There is no problem with my laptop(dell xps) as they work well on windows7. I have my sound settings as follows Hardware --- Built-in Audio 1 Outpu/1 Input Analog Stereo Duplex Input(Internal Microphone) & Output(Speakers) -----Built-in audio Analog Stereo Any suggestions to fix the problem??

  Read the article

• Acer Aspire One and Kernel 2.6.35-25 Freeze

  - by Nerdfest

  I'm having a problem with an Acer Aspire One netbook after the latest kernel upgrade. Basically, doing anything relating to an external monitor locks the trackpad, and in some cases, the keyboard as well. This lock will continue in Gnome even after reboots, and requires battery removal to fix. It does work in the graphical login manager up until the problem occurs the first time. And ideas on settings, etc, that I can change to make it work again?

  Read the article

• changing default text input on nexus 7 ubuntu to bluetooth keyboard

  - by user101764

  i was curious if it was possible to use a logitech bluetooth keyboard for android 4.0+ with ubuntu on nexus 7? i was able to connect the keyboard regularly with the gui, the pin worked, so i would assume it is a matter of changing the default text input. i searched all of the settings i could find without finding any such option any help would be appreciated, if this is not possible feel free to say so and close this thread

  Read the article

• How to associate hardware volume control to USB speakers?

  - by Wolfger

  My Xubuntu system recognizes my speakers, and I can change the mixer settings to make them the active sound device, but no matter what I do, the hardware dial will only affect the onboard sound device. generic-usb 0003:046D:0A19.0003: input,hidraw1: USB HID v1.00 Device [ Logitech Logitech Z205 ] on usb-0000:00:1d.1-1/input2 updated to reflect the fact that this was Xubuntu desktop (from Kubuntu install originally) where I had this problem. I was able to easily do this from Ubuntu Natty installation.

  Read the article

• Should I install ubuntu on USB instead of HDD dual-boot?

  - by user2147243

  I had Ubuntu 12.04 installed as dual-boot OS on top of Vista on my laptop. Hacked the grub settings to default to Vista (instead of the default Ubuntu -- pain) on startup, and all was OK for occasional Ubuntu use for past 6 months. Then last week I got a strange message about 'lack of disk space' (~50MB free) when installing pxyplot, even though there was still about 6GB free disk space when I checked later. Then today the Ubuntu wouldn't load at all, and checking the HDD partitions in Vista it looked like the 15GB Ubuntu partition was now three smaller partitions! So, I got rid of those partitions and expanded the Vista partition to use the reclaimed space. Now can't restart ('grub rescue' appears and doesn't 'rescue' anything), so I'll have to do a boot recovery using a Vista installation CD. (Not a particularly user-friendly failure mode of the dual-boot installation!) I now have to decide to either a) try installing ubuntu on the HDD again, but don't want to stuff up my Vista ever again, as that is my most used OS, or b) install Ubuntu on a 16GB USB 3.0 stick. Apparently performance from USB won't be as good as from HDD, and running OS from USB stick does lots of r/w so the stick may fail after a few years! Perhaps installing Ubuntu on live USB and setup to then run in RAM would alleviate the performance/USB lifespan problems? If I create a live-USB for Ubuntu OS, will it boot off that when I restart the laptop with it plugged in? Or will I have to change the laptop setting for boot-order whenever I want to boot Ubuntu instead of Vista (that would be even more painful than the grub default boot order putting Ubuntu ahead of the existing Vista OS!) -- update: I recovered my Vista setup using Iolo SystemMechanic Disaster Recovery Tool, and created a bootable USB of Ubuntu 13.10 on an 8GB USB3.0 pendrive, with 4GB of 'persistence' to allow saving of settings, install some packages etc. It worked OK for a couple of test boots, but once I changed the time and desktop wallpaper, the next Ubuntu reboot crashed and I then couldn't get it to boot successfully. So I decided to install Ubuntu 12.04 LTS as a dual-boot again, but this time instead of partitioning the HDD and installing from an ISO DVD I used the wubi.exe tool to install Ubuntu as a dual-boot. Worked very well, although one oddity was that, despite asking how big the make the partition (20GB), the installed Ubuntu appears to be happily installed somewhere within the Vista NTFS file system (no partition shows up in Windows disk manager, and in Ubuntu disk management tool the entire 133 GB of HDD is showing, with ~40GB free space). A nice feature of installing the dual-boot using wubi is that the laptop now uses Windows boot manager on startup, with Vista as the default OS and Ubuntu happily listed as second on the list. So far so good.

  Read the article

• How do I turn off the onscreen keyboard on the lock screen?

  - by Patrick Marchwiak

  The lock screen has an on screen keyboard that I am unable to disable. I don't remember exactly but I believe I turned it on using the "Screen Keyboard" setting in the Universal Access settings. I've tried a number of things all with no effect: Toggling "Screen Keyboard" in Universal Access Toggling "Onscreen keyboard" in the login screen (LightDM) Clicking on the "x" in the upper right corner of the keyboard

  Read the article

• Cannot Update through Manager or Terminal/ Software Center Does Not Work

  - by BROBA

  I installed Tor a few days ago via the terminal. I deleted some hashtags in the gedit polipo, and changed my proxy settings in chrome, but was unable to make it work and have since changed all of it back. I then downloaded the Tor browser bundle which works great, but ever since then have been unable to download updates or new software. The update manager says to "check internet connection" and the software center displays a mostly blank screen under apps like "rhythmbox" and just says "available from main source" when I click on "use this source" a refresh symbol appears on the upper right corner of the software center for a split second, and then nothing happens. The app does not download and isn't available in the dash. When I try via the terminal it says it's unable to connect to my ip address. I tried changing the server and unchecking all the repository options for software sources, all to no avail. WHAT DID I DO?????

  Read the article

• Midori displays mobile sites.

  - by Tigull

  I've installed Midori to work in an Elementary mockup. Midori works just fine, but, on a few domains, it opens mobile websites instead of the regular pages. A of now, this happens with gmail.com, facebook.com, paginegialle.it, and others; yet other websites which do have a mobile version, as gazzetta.it, show the regular version. I couldn't find a solution through settings and I didn't find any mention of this problem on forums or else, so any help would be greatly appreciated.

  Read the article

• Upgrade from 10.10 to 11.04

  - by hemanta pathak

  On doing an upgrade from 10.10. to 11.04 using Upgrade Manager everything works fine. But on installing a software that bundle its owns runtime environment( loader and system files) and installs the custom runtime ( basically loader) in the location where the native one resides, the above mentioned upgrade fails.(Upgrade starts and after sometime it encounters an error and aborts.) Basically , /usr/bin/dpkg throws up an error on being unable to locate a system shared library in the aforesaid third party runtime folder ( /usr/bin/dpkg should not search the third party runtime folder.Instead it should look at the system default folder) But if we remove the installed third party loader from the default system location /lib and place it in some other location , the upgrade problem goes away. This makes me believe /usr/bin/dpkg invokes(loads) the wrong loader and as such goes looking for the dependent libraries in the third party folder. Can someone take a look at this ? is there some bug with dpkg

  Read the article

• Why are notifications appearing in the invisible black zone above my monitor ?

  - by Capt.Nemo

  I've got two monitors, with the right side one being slightly lower in the display settings. However any notifications I receive from notify-osd (including pidgin, notify-send etc) are sent to the top-most part of the right monitor screen, which results it in being invisible. And here's a pic of my monitor preferences : I'd earlier used the Wallpaper plugin in compiz to stitch my desktops, and then uninstalled compiz-extras. I'm using Ubuntu 11.04 in classic mode.

  Read the article

• Chrome UI styles are not working under Ubuntu! GTK Theme is not working!

  - by EApubs

  Chrome Version : 31.0.1650.63 (Official Build 238485) Extensions : Google docs, Lastpass Im on a brand new system, just installed Ubuntu. When I open chrome, normally the search box, alert windows are styled according to my current system GTK theme. But now they look like classic windows theme! Tried different themes and adjusting the theme under Settings Appearance in Chrome but still no use. How to fix this? Here's a screenshot :

  Read the article

• Gnome-shell worskpace preview on dual screen

  - by martin

  I'have isntalled gnome3 and I have dual screens(laptop, monitor). Is it possible to see the other monitor in workspace preview in the gnome panel??? I only can see primary monitor, that's why i'm not able to move windows inside the second screen? I've tried to change some settings in dconf , but with no luck. I want to have it like this http://stephen.rees-carter.net/wp-content/uploads/2011/04/Unity-workspace-switcher.png Does anyone have a solution?

  Read the article

• INI files or Registry or personal files

  - by Shirish11

  I want to save the configuration of my project. Which includes Screen size Screen Position Folder paths Users settings and so on. The standard places where you can save these are configuration values are: Registry INI files Personal files (like *.cfg) I would like to know how do you choose between these places? Also are there any pros & cons of using any of them?

  Read the article

• How can I set the date format to my country setting?

  - by Jamina Meissner

  I am German, but I use only English software. Hence, I am also using English Ubuntu. It's not because I don't know how to install German Ubuntu. It's because I prefer to work with English software environment. However, I would like to keep date & time format in German format, just as I use a German keyboard layout in English Ubuntu. I can set the time format to 24h time. But how can I set the date format to German time format? It is irritating for me to have the day number before the time numbers: In other words, instead of "Oct 14 15:16" I want it to display "14 Okt" or (if only English language is available) "14 Oct 15:16" or "14th Oct 15:16". At least, the number of the day should be displayed before the month. In Windows, it was no problem to choose time/date/currency settings according to a chosen country. Where can I do this in Ubuntu? The best would be if I could freely enter the date/time format myself with variables (DD.MM hh.mm.ss etc). I found answers for Ubuntu 11.04, but not for Ubuntu 12.04. I am using Ubuntu 12.04, 64-bit. Keep in mind that I am a beginner. So I'd like to be able to do this via GUI, if possible. EDIT: I found the answer in a forum. Go to System Settings... and choose Language Support. There are two tabs, Language and Reginal Formats. You are by default on the Language tab. On the Language tab, click Install / Remove Languages. A window with a list of languages opens. Mark the language(s) you want to add for your time/date/currency format. Click Apply Changes. Ubuntu will now download and install the additional language files, as well as help files of other applications in this language. So don't be irritated. When Ubuntu has finished applying the changes, switch to Regional Formats tab. (Do not change the Language for menus and windows on the Language tab if you only want to change the date/time/unit format). There you can choose from the dropdown list the language for your preferred format for date/time/currency/unit. Log out and log in again to have the changes take effect.

  Read the article

• Can I use Wubi install on Windows 7 FDE?

  - by Michael Chapman

  I have a windows machine using Truecrypt 7.1a FDE. I would like to use wubi to install Ubuntu within windows. Will doing this cause any issues with my system booting up? From what I understand Wubi does not modify any bootloaders. All it does is modify some boot settings within windows. So in theory the Truecrypt custom bootloader will remain the same, and after I get through the truecrypt prompt, have the option of windows or Ubuntu right?

  Read the article

• m not able to connect to wifi network

  - by Broken Heart

  i had tried every code every idea every thing but i failed wiireless driver broadcom bcm43412 but when i checked pci-id it show not supported my pci id is 14e4:4365 and chip id is BCM43142 i tried edit connection myself to olso but i cannt wat to put in clone mac adress place? device mac adress is the router mac adress but what is clone mac adress i had placed my laptop mac adress in place of clone mac adress bt it doesnot work tried every thing but it not work checked additional driver by going system settings it doesnot contain any drivers,tried internet by cable then it connects then how sholud i correct this plz tell

  Read the article

• Can Ubuntu Unity be made as snappy as Xubuntu?

  - by subeh.sharma

  I am fan of Xubuntu just because of its snappiness. Now i know that it is based on light-weight XFCE which is the secret for this snappiness but I am just wondering if something could be done on Unity to bring it, say, close to that snappiness? I have not installed NVIDIA's driver as I have never seen any improvements on Ubuntu. Would love to hear views on this in case somebody have been able to tweak some settings.

  Read the article

• Will you share your SQL Server configuration?

  - by Bill Graziano

  I regularly visit client sites and review their SQL Server configurations.  I come across all kinds of strange settings.  I’ve been thinking about a way to aggregate people’s configurations and see what’s common and what’s unique.  I used to do that with polls on SQLTeam.com.  I think we can find out more interesting things if we look at combinations of settings in relation to size and volume. I’ve been working on an application for another project that is similar.  It will be fairly easy to use that code for this.  I can have something up and running in a few days – if people are interested in it.  I admit that I often come up with ideas that just don’t make sense.  This may be one of them.  One of your biggest concerns has be how secure your data is.  My solution is not to store anything identifying.  The instance name and database names can both be “anonymized” and I don’t store the machine name or IP address or anything to do with logins. Some of the questions I’m curious about are: At what size database does the Enterprise Edition become prevalent? Given the total size of the databases how much RAM is common? How many people have multiple data files?  At what size does that become prevalent? How common is database mirroring?  Replication?  Log shipping? How common is full recovery mode?  At what data size does it become prevalent? I think those are all questions that are easy to answer -- with the right data.  The big question is whether or not people will share their SQL Server configurations.  I understand that organizations in regulated or high security environments can’t participate.  But I think that leaves many, many people that can.  Are you willing to share your configuration and learn about others?  I have a simple sign up form here.  It’s actually a mailing list signup that also captures your edition, number of servers and largest database.  The list will only be used for this project.  Is your SQL Server is configured correctly?  Do you wonder what the next step is as your data grows?  Take a second and sign up.

  Read the article

• How can I manage changes between a local config file and a remote config file in a mobile application?

  - by hib

  I have an application with a configuration file that is stored in the application bundle. This config file stores the names of images on a remote server. Whenever the application is started, I download the configuration file from the server and see if there are any changes or updates. If there are changes, I iterate over the array of configuration settings and download the changed images to the user's iPhone I think that I will first list all of the name changes in an array, and after that start loading that changed images. However, I'm wondering if there is a better approach to solving this problem.

  Read the article

< Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >