Search Results

Search found 9381 results on 376 pages for 'wireless driver'.

Page 175/376 | < Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >

• CD/DVD drive not mounted when inserted with Disc of any kind

  - by Cisco Sán

  I just noticed that if a insert a CD or a DVD of any kind, the Drive will start spinning but it will not show the mounted disc. Before it used to ask me what to do with the media inserted. Now it doesn't even do that. I ran in the terminal this code: eject -n and it displays this: " eject: device is `/dev/sr0'" what can I do to get the functionality back on my drive. also ran this command: sudo mount -o ro,unhide,uid=1000 /dev/cdrom /mnt/cdrom but in return i get this: " mount: mount point /mnt/cdrom does not exist" Running Ubuntu 11.10 HERE IS THE HISTORY UNTIL NOW thanks Waltinator: I ran the 'dmesg' but don't know what I'm looking for. Im a newbie on this. The same thing with the 'ls -rlt /var/log' command. Should I create the directory for the mount? at this point really don't know what to do. – Cisco Sán 7 hours ago Here are 3 lines from my dmesg after I successfully inserted a CD: [ 4804.416018] wlan0: no IPv6 routers present [ 8214.125450] ISdit ISO 9660 Extensions: Microsoft Joliet Level 3 [ 8214.136556] ISO 9660 Extensions: RRIP_1991A The first line is a previous event, my wireless going online. The next 2 lines are a good result. The number in square brackets is "seconds since boot", the rest of the line is usually helpful. And no, you should NOT create the mount point. Let's try to get the automatic mounting to work. – waltinator 7 hours ago ok this are my last 3 lines on the 'dmesg' [ 18.130819] init: plymouth-stop pre-start process (1396) terminated with status 1 [ 28.780011] wlan0: no IPv6 routers present [ 505.632119] CE: hpet increased min_delta_ns to 20113 nsec – Cisco Sán 6 hours ago It looks like your CD/DVD drive is not connected to the data bus, and not causing an interrupt when you insert a platter. – waltinator 6 hours ago Try dmesg | grep -A8 CD-ROM which should show you what the system thought was available when it came up. – waltinator 6 hours ago here is my printout [0.774351] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-T40N A100 PQ: 0 ANSI: 5 [0.778117] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [0.778122] cdrom: Uniform CD-ROM driver Revision: 3.20 [0.778282] sr 0:0:0:0: Attached scsi CD-ROM sr0 [0.778340] sr 0:0:0:0: Attached scsi generic sg0 type 5 [0.780416] Freeing unused kernel memory: 984k freed [0.780732] Write protecting the kernel read-only data: 10240k [0.780986] Freeing unused kernel memory: 20k freed [0.786331] Freeing unused kernel memory: 1400k freed [0.804912] udevd[90]: starting version 173 [0.874178] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [0.874208] r8169 0000:02:00.0: PCI INT A - GSI 16 (level, low) - IRQ 16 OK, your system sees the drive. Can you open and close the tray with eject and eject -t? Run udevadm monitor while you insert a CD (type ^C when done) and see if you get "change" and "add" messages. – waltinator 6 hours ago ok, "eject" works perfectly "eject -t" does nothing. this is the message for "udevadm monitor": KERNEL[13771.009267] change /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sr0 (block) UDEV [13773.878887] change /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0 /block/sr0 (block) – Cisco Sán 6 hours ago sudo hwinfo --cdrom (the hwinfo package is installable through Software Center) describes my CD-ROM, try it. – waltinator 4 hours ago My read out from the "sudo hwinfo --cdrom" are the following: hal.1: read hal dataprocess 2753: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 280. This is normally a bug in some application using the D-Bus library. libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files 22: SCSI 00.0: 10602 CD-ROM (DVD) [Created at block.247] Unique ID: KD9E.JgkxTS4hgl2 Parent ID: 3p2J.gdUMCD83e+E SysFS ID: /class/block/sr0 SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0 Hardware Class: cdrom Model: "HL-DT-ST DVD+-RW GSA-T40N" Vendor: "HL-DT-ST" Device: "DVD+-RW GSA-T40N" Revision: "A100" Driver: "ata_piix", "sr" Driver Modules: "ata_piix" Device File: /dev/sr0 (/dev/sg0) Device Files: /dev/sr0, /dev/scd0, /dev/disk/by-id/ata-HL-DT-ST_DVD+_-RW_GSA-T40N_K048BJ74257, /dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:0:0, /dev/cdrom, /dev/cdrw, /dev/dvd, /dev/dvdrw Device Number: block 11:0 (char 21:0) Features: DVD Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #17 (IDE interface) Drive Speed: 31 Volume ID: "Movie" Publisher: "INTERVIDEO" Creation date: "20050424162207000" Thanks for the help. To Castro, hope this is what you meant and sorry for the comments..

  Read the article

• HTG Explains: What is the Windows Page File and Should You Disable It?

  - by Chris Hoffman

  Windows uses a page file to store data that can’t be held by your computer’s random-access memory when it fills up. While you can tweak the page file settings, Windows can manage the page file fine on its own. The Windows page file is somewhat misunderstood. People see it as the cause of slowdowns because it’s slower to use the page file than your computer’s RAM, but having a page file is better than not having one. Image Credit: Blake Patterson on Flickr HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

  Read the article

• Steps to diagnose SNU5600 disconnection problem

  - by Rich

  I have a Philips SNU5600 WiFi dongle plugged into two machines (ie I have two SNU5600 dongles, one in each machine). One machine is running 10.10 and the other is running Linux Mint. The dongles work absolutely fine, except if I do a lot of file transfers to a NAS attached to the wireless router. After a while the connection to the router will go. To get the connection back I either need to run sudo /etc/init.d/networking restart or I need to unplug and plug in again the dongle. Otherwise the dongle works fine (web browsing, streaming, etc). Output of lsusb: Bus 002 Device 003: ID 0471:1236 Philips (or NXP) SNU5600 802.11bg Output of lsusb -v at http://pastebin.com/dXYKkF01 What steps should I take next to resolve this? Is it a known problem? Could it be the router? It is a 3Com "OfficeConnect Wireless 11g Cable/DSL Gateway Version 1.02.15".

  Read the article

• How to stop fan running always on Asus P8P67LE motherboard with ATI Radeon HD6900

  - by Chris Good

  I'm using Ubuntu 12.04 LTS. I'm not sure if it is the CPU (i7) fan or the video card fan. I've tried using lm-sensors & fancontrol sudo sensors-detect Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `w83627ehf': * ISA bus, address 0x290 Chip `Nuvoton NCT6776F Super IO Sensors' (confidence: 9) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: # Chip drivers coretemp w83627ehf Like many people, I'm also getting error: /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed Here is the output of sensors: # sensors radeon-pci-0100 Adapter: PCI adapter temp1: +71.0°C coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +44.0°C (high = +80.0°C, crit = +98.0°C) Core 0: +44.0°C (high = +80.0°C, crit = +98.0°C) Core 1: +40.0°C (high = +80.0°C, crit = +98.0°C) Core 2: +43.0°C (high = +80.0°C, crit = +98.0°C) Core 3: +42.0°C (high = +80.0°C, crit = +98.0°C) I'm hoping some-one has already solved this for my configuration because this seems to be a problem for many people and there are many different suggestions.

  Read the article

• GPU hung when switching graphic card

  - by Lie Ryan

  I have a laptop (Dell Inspiron N4110) with a switchable graphic. $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Whistler [AMD Radeon HD 6600M Series] (rev ff) Normally, my laptop starts with both graphic cards enabled, which caused the laptop to turn very hot and the fan to become very noisy. I have been using a small script to disable the Radeon card. For some time, I'm quite happy with this arrangement. However, I have been having some issues with the Intel card (IGD), the Intel card often randomly hang when running OpenGL apps; and so I want to give the Radeon card (DIS) another chance. I have never been able to switch to the Radeon card, but recently, I found out that if I do a "delayed switching" (DDIS): # echo "DDIS" > /sys/kernel/debug/vgaswitcheroo/switch root@lieryan-dell-ubuntu:/sys/kernel/debug/vgaswitcheroo# cat switch 0:IGD:+:Pwr:0000:00:02.0 1:DIS: :Pwr:0000:01:00.0 then I logoff (i.e. to restart X), the screen switch to pseudo-tty and then it stuck there freezing. At this situation, mouse and keyboard stops working so I can't switch to another ptty. I tried ssh-ing from another computer to salvage logs (dmesg at that point) and whatnot; I found out that when freezing, the active graphic card is the AMD card: -- this is from ssh -- # cat switch 0:IGD: :Off:0000:00:02.0 1:DIS:+:Pwr:0000:01:00.0 but the GPU is apparently hung, looking at dmesg gives: ... [ 1411.649974] vga_switcheroo: client 0 refused switch [ 1411.649985] vga_switcheroo: setting delayed switch to client 1 [ 1423.911759] vga_switcheroo: processing delayed switch to 1 [ 1424.006564] fbcon: Remapping primary device, fb1, to tty 1-63 [ 1424.006799] i915: switched off [ 1424.840351] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1425.718088] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1426.622377] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1427.355683] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1428.193549] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id ... the invalid framebuffer id error is repeated for many times over ... I were able to successfully recover by switching back to the Intel card and restarting X from ssh; indicating that only the Radeon card has problems switching. System info: $ uname -a Linux lieryan-dell-ubuntu 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric The laptop also do not have the option to set graphic card at BIOS and the proprietary driver, fglrx, also have never worked; when I installed it through jockey ("Additional Drivers"), glxinfo showed that it still being rendered by Mesa, the /sys/kernel/debug/vgaswitcheroo directory has gone missing, and the driver crashes with a traceback if I use xorg.conf to tell X to use fglrx. Anyone had any idea if it is possible to use this AMD card either with the radeon or the fglrx driver? logs: dmesg

  Read the article

• How To Log Into Multiple Accounts On the Same Website At Once

  - by Chris Hoffman

  If you ever want to sign into two different accounts on the same website at once – say, to have multiple Gmail inboxes open next to each other – you can’t just open a new tab or browser window. Websites store your login state in browser-specific cookies. There are a number of ways you can get another browser window with its own cookies and stay logged into multiple accounts at once. HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

  Read the article

• Why do I get unknown printer error 0xFA on my EPSON Workforce WF-3540 under Ubuntu 12.10?

  - by potofcoffee

  I recently bought an EPSON Workforce WF-3540, which I'm using under Ubuntu 12.10 with the official driver provided by EPSON. I am often printing batches of about a hundred pages, duplex. When I'm doing this, after about 20 pages, I regularly get an error message on the printer screen, telling me the printer encountered unknown error 0xFA, forcing me to turn the printer off and back on. I talked to EPSON about the problem, but they claim they're not supporting Linux and tell me to ask the Linux community about the problem (and possibly another driver?). So this is what I'm doing here... any ideas? Unfortunately, the documentation does not contain any information pertaining to error code 0xFA and the support hotline wasn't able to give me further information, either. BTW, the problem hasn't happened, so far, when I'm printing smaller batches or not using duplex. Whenever the problem happens, there's a page in the printer that's already been printed on one side, so I'm suspecting the problem's connected with the duplexer.

  Read the article

• Bluetooth not really "turning on" on a Sony Vaio VPCEG

  - by marcioAlmada

  On a Sony Vaio VPCEG, bluetooth is not working properly: The gnome-shell bluetooth indicator (at the main bar) shows the bluetooth is on, but when I try to switch visibility on it simply doesn't turn on. When I open the bluetooth configuration dialog, the on/off indicator shows me the bluetooth is off. And when I try to turn it on it simply does not turn on. The following is outputted by lsusb command: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0c45:64be Microdia Bus 001 Device 004: ID 0489:e027 Foxconn / Hon Hai Bus 002 Device 014: ID 4971:ce22 SimpleTech ====== Update: Output from rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: sony-wifi: Wireless LAN Soft blocked: no Hard blocked: no 2: sony-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 3: hci0: Bluetooth Soft blocked: no Hard blocked: no What should I do to really activate the bluetooth?

  Read the article

• Can't print on my brand new Canon Pixma MP495

  - by Jean Ludovic Vandal

  I just purchased a Canon Pixma MP495. It was working perfect, except for the scanner. It won't install the driver for the scanner. Anyway, I was printing using the new printer. After a while, it started saying that the printing job was sent to the printer and then that the print job was completed. But, nothing came out of the printer. I uninstalled the driver and installed it over again. Nothing. Can somebody help me out. Can't work without a printer. Thanks in advance.

  Read the article

• Week in Geek: Botnet Epidemic Fueled by Malware Toolkits Edition

  - by Asian Angel

  This week we learned how to stream media files from any PC to a PlayStation, enable user-specific wireless networks in Windows 7, monitor the bandwidth consumption of individual applications, configure the Linux Grub2 Boot Menu the easy way, “add Dropbox to the Start Menu, understand symbolic links, & rip TV Series DVDs into episode files”, and more Latest Features How-To Geek ETC How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware Comix is an Awesome Comics Archive Viewer for Linux Get the MakeUseOf eBook Guide to Speeding Up Windows for Free Need Tech Support? Call the Star Wars Help Desk! [Video Classic] Reclaim Vertical UI Space by Adding a Toolbar to the Left or Right Side of Firefox Androidify Turns You into an Android-style Avatar Reader for Android Updates; Now with Feed Widgets and More

  Read the article

• Does Hauppauge WinTV HVR-900 (r2) [USB ID 2040:6502] work with ubuntu 12.04 LTS?

  - by nightfly

  I have this DVB+Analog usb tv tuner Hauppauge WinTV HVR-900 (r2) [USB ID 2040:6502]. This used to work under ubuntu 10.04 LTS. But in 12.04 there seems to be a problem. I have linux-firmware-nonfree and ivtv-utils installed. I am running Ubuntu 12.04.1 LTS 64 bit with all updates installed and the default unity environment. When I run mplayer tv:// -tv driver=v4l2:device=/dev/video1:input=1:norm=PAL I get a solid green screen and no picture. Here input 1 is the composite input of the card. MPlayer svn r34540 (Ubuntu), built with gcc-4.6 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing tv://. TV file format detected. Selected driver: v4l2 name: Video 4 Linux 2 input author: Martin Olschewski comment: first try, more to come ;-) Selected device: Hauppauge WinTV HVR 900 (R2) Tuner cap: Tuner rxs: Capabilities: video capture VBI capture device tuner audio read/write streaming supported norms: 0 = NTSC; 1 = NTSC-M; 2 = NTSC-M-JP; 3 = NTSC-M-KR; 4 = NTSC-443; 5 = PAL; 6 = PAL-BG; 7 = PAL-H; 8 = PAL-I; 9 = PAL-DK; 10 = PAL-M; 11 = PAL-N; 12 = PAL-Nc; 13 = PAL-60; 14 = SECAM; 15 = SECAM-B; 16 = SECAM-G; 17 = SECAM-H; 18 = SECAM-DK; 19 = SECAM-L; 20 = SECAM-Lc; inputs: 0 = Television; 1 = Composite1; 2 = S-Video; Current input: 1 Current format: YUYV v4l2: current audio mode is : MONO v4l2: ioctl set format failed: Invalid argument v4l2: ioctl set format failed: Invalid argument v4l2: ioctl set format failed: Invalid argument v4l2: ioctl query control failed: Invalid argument v4l2: ioctl query control failed: Invalid argument v4l2: ioctl query control failed: Invalid argument v4l2: ioctl query control failed: Invalid argument Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory [vdpau] Error when calling vdp_device_create_x11: 1 ========================================================================== Opening video decoder: [raw] RAW Uncompressed Video Movie-Aspect is undefined - no prescaling applied. VO: [xv] 640x480 = 640x480 Packed YUY2 Selected video codec: [rawyuy2] vfm: raw (RAW YUY2) ========================================================================== Audio: no sound Starting playback... v4l2: select timeout V: 0.0 2/ 2 ??% ??% ??,?% 0 0 v4l2: select timeout V: 0.0 4/ 4 ??% ??% ??,?% 0 0 v4l2: select timeout V: 0.0 6/ 6 ??% ??% ??,?% 0 0 v4l2: select timeout v4l2: 0 frames successfully processed, 1 frames dropped. Exiting... (Quit) Here is the dmesg of the card when plugged in.. [12742.228097] usb 1-4: new high-speed USB device number 3 using ehci_hcd [12742.367289] em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0) [12742.367296] em28xx: Audio Vendor Class interface 0 found [12742.367585] em28xx #0: chip ID is em2882/em2883 [12742.550086] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 [12742.550104] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 [12742.550120] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 [12742.550135] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 [12742.550150] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12742.550165] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12742.550181] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 [12742.550196] em28xx #0: i2c eeprom 70: 32 00 37 00 38 00 32 00 33 00 39 00 30 00 31 00 [12742.550211] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 [12742.550226] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 [12742.550241] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [12742.550257] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [12742.550272] em28xx #0: i2c eeprom c0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [12742.550287] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [12742.550302] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [12742.550317] em28xx #0: i2c eeprom f0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [12742.550334] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x2bbf3bdd [12742.550338] em28xx #0: EEPROM info: [12742.550340] em28xx #0: AC97 audio (5 sample rates) [12742.550343] em28xx #0: 500mA max power [12742.550346] em28xx #0: Table at 0x24, strings=0x1e82, 0x186a, 0x0000 [12742.552590] em28xx #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18) [12742.555516] tveeprom 15-0050: Hauppauge model 65018, rev B2C0, serial# 1292061 [12742.555523] tveeprom 15-0050: tuner model is Xceive XC3028 (idx 120, type 71) [12742.555529] tveeprom 15-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) [12742.555534] tveeprom 15-0050: audio processor is None (idx 0) [12742.555537] tveeprom 15-0050: has radio [12742.570297] tuner 15-0061: Tuner -1 found with type(s) Radio TV. [12742.570327] xc2028 15-0061: creating new instance [12742.570332] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [12742.573685] xc2028 15-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [12742.624056] xc2028 15-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [12744.126591] xc2028 15-0061: Loading firmware for type=MTS (4), id 000000000000b700. [12744.153586] xc2028 15-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [12744.280963] Registered IR keymap rc-hauppauge [12744.281151] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc1/input10 [12744.281541] rc1: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc1 [12744.282454] em28xx #0: Config register raw data: 0xd0 [12744.284709] em28xx #0: AC97 vendor ID = 0xffffffff [12744.285829] em28xx #0: AC97 features = 0x6a90 [12744.285832] em28xx #0: Empia 202 AC97 audio processor detected [12744.359211] em28xx #0: v4l2 driver version 0.1.3 [12744.404066] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [12745.915089] MTS (4), id 00000000000000ff: [12745.915100] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [12746.161668] em28xx #0: V4L2 video device registered as video1 [12746.161673] em28xx #0: V4L2 VBI device registered as vbi0 [12746.162845] em28xx-audio.c: probing for em28xx Audio Vendor Class [12746.162848] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [12746.162851] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab [12746.221099] xc2028 15-0061: attaching existing instance [12746.221105] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [12746.221109] em28xx #0: em28xx #0/2: xc3028 attached [12746.221113] DVB: registering new adapter (em28xx #0) [12746.221118] DVB: registering adapter 0 frontend 0 (Micronas DRXD DVB-T)... [12746.221869] em28xx #0: Successfully loaded em28xx-dvb [13111.196055] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13112.720062] MTS (4), id 00000000000000ff: [13112.720072] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13214.956057] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13216.479806] MTS (4), id 00000000000000ff: [13216.479816] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13276.408056] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13277.932093] MTS (4), id 00000000000000ff: [13277.932104] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13305.032076] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13306.556449] MTS (4), id 00000000000000ff: [13306.556460] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13392.236055] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13393.760123] MTS (4), id 00000000000000ff: [13393.760133] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13637.534053] usb 1-4: USB disconnect, device number 3 [13637.534183] em28xx #0: disconnecting em28xx #0 video [13637.560214] em28xx #0: V4L2 device vbi0 deregistered [13637.560335] em28xx #0: V4L2 device video1 deregistered [13637.561237] xc2028 15-0061: destroying instance [13639.772120] usb 1-4: new high-speed USB device number 4 using ehci_hcd [13639.911351] em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0) [13639.911357] em28xx: Audio Vendor Class interface 0 found [13639.911637] em28xx #0: chip ID is em2882/em2883 [13640.094262] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 [13640.094280] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 [13640.094295] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 [13640.094311] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 [13640.094326] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [13640.094341] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [13640.094356] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 [13640.094371] em28xx #0: i2c eeprom 70: 32 00 37 00 38 00 32 00 33 00 39 00 30 00 31 00 [13640.094386] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 [13640.094401] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 [13640.094416] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [13640.094432] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [13640.094447] em28xx #0: i2c eeprom c0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [13640.094462] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [13640.094477] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [13640.094492] em28xx #0: i2c eeprom f0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [13640.094509] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x2bbf3bdd [13640.094512] em28xx #0: EEPROM info: [13640.094515] em28xx #0: AC97 audio (5 sample rates) [13640.094517] em28xx #0: 500mA max power [13640.094521] em28xx #0: Table at 0x24, strings=0x1e82, 0x186a, 0x0000 [13640.097391] em28xx #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18) [13640.099617] tveeprom 15-0050: Hauppauge model 65018, rev B2C0, serial# 1292061 [13640.099623] tveeprom 15-0050: tuner model is Xceive XC3028 (idx 120, type 71) [13640.099629] tveeprom 15-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) [13640.099634] tveeprom 15-0050: audio processor is None (idx 0) [13640.099637] tveeprom 15-0050: has radio [13640.112849] tuner 15-0061: Tuner -1 found with type(s) Radio TV. [13640.112877] xc2028 15-0061: creating new instance [13640.112882] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [13640.115930] xc2028 15-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [13640.164057] xc2028 15-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [13641.666643] xc2028 15-0061: Loading firmware for type=MTS (4), id 000000000000b700. [13641.693262] xc2028 15-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [13641.820765] Registered IR keymap rc-hauppauge [13641.820958] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc2/input11 [13641.821335] rc2: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc2 [13641.822256] em28xx #0: Config register raw data: 0xd0 [13641.824526] em28xx #0: AC97 vendor ID = 0xffffffff [13641.825503] em28xx #0: AC97 features = 0x6a90 [13641.825507] em28xx #0: Empia 202 AC97 audio processor detected [13641.899015] em28xx #0: v4l2 driver version 0.1.3 [13641.944064] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13643.470765] MTS (4), id 00000000000000ff: [13643.470776] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13643.717713] em28xx #0: V4L2 video device registered as video1 [13643.717718] em28xx #0: V4L2 VBI device registered as vbi0 [13643.718770] em28xx-audio.c: probing for em28xx Audio Vendor Class [13643.718775] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [13643.718778] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab [13643.777148] xc2028 15-0061: attaching existing instance [13643.777154] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [13643.777158] em28xx #0: em28xx #0/2: xc3028 attached [13643.777162] DVB: registering new adapter (em28xx #0) [13643.777167] DVB: registering adapter 0 frontend 0 (Micronas DRXD DVB-T)... [13643.777876] em28xx #0: Successfully loaded em28xx-dvb And here goes the lsmod output lsmod|grep em28xx em28xx_dvb 18579 0 dvb_core 110619 1 em28xx_dvb em28xx_alsa 18305 0 em28xx 109365 2 em28xx_dvb,em28xx_alsa v4l2_common 16454 3 tuner,tvp5150,em28xx videobuf_vmalloc 13589 1 em28xx videobuf_core 26390 2 em28xx,videobuf_vmalloc rc_core 26412 10 rc_hauppauge,ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,em28xx,ir_nec_decoder snd_pcm 97188 3 em28xx_alsa,snd_hda_intel,snd_hda_codec tveeprom 21249 1 em28xx videodev 98259 5 tuner,tvp5150,em28xx,v4l2_common,uvcvideo snd 78855 14 em28xx_alsa,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device Isn't this driver mainline now? Or this card is not supported? Or the analog functionality is screwed? I need the analog capture working for this card. Please help!

  Read the article

• Ubuntu 12.04 LTS Realtek RTL8192E Problems

  - by Logan

  My wifi is not working. I have tried ndiswrapper with the XP driver but that still did not work. Please explain to me in layman's terms. I can run commands so if you tell me exactly what to put, i will put it. Basically, ubuntu is not showing a wireless networks option and when I ran some command yesterday it said the driver was UNCLAIMED. Please help. This is a wintec card with realtek rtl8192E chip on it. It is a desktop computer. On a 20gb partition, other 60gb is for windows(yeah its an old desktop). Use windows installer to install ubuntu(this is one of the dell desktops that wont boot ubuntu from disk). So any help is appreciated and I would like to get this done THIS weekend.

  Read the article

• PlayOnLinux Unable to find 32bit opengl libraries Dual ATI Videocards

  - by Rodolfo Pires

  Im curently running Ubuntu 12.04 LTS 64Bit So, i installed league of legends fine the first time with the opensource ATI Drivers provided by ubuntu itself with no issues at all, but it runs so slow ... max 20fps because those drivers dont fully support my Dual Graphic cards Than i restored system and i installed the Linux Version of the Proper ATI Drivers from the AMD Website wich supports my APU AMD-A8-4500M with the AMD Radeon 7640G + 7670M Graphics Cards enabling me full performance from my system .. Problem is, to run League of Legends i need a 32bit opengl library, and the driver, automaticly detects a 64bits Linux install and loads the 64bit libraries but not the 32 ones . i need some kind of command, to force the 32bit libraries to load, or to make League of Legends run on the 64 ones .. Im kinda noob to ubuntu .. i installed the 32 bits ones trough terminal and still doesnt work idk why, maybe the driver doesnt want to load them .. plzz help me on this, i dont want to go back to windows just to play league since im noob idk what more details to post here so plz tell me what do you need

  Read the article

• Ubuntu Server and setting up two nic cards

  - by kmalik

  I have ubuntu server on a computer with a wireless and hardwired nic card. The wireless needs to get the internet and pass it to the ubuntu server as well as pass it along to the hardwired nic card to more computers. I am having issues getting the basic set up as I believe the route table is grabbing from the wrong nic card. The router is 192.168.1.0 and the server is set to 192.168.1.11 on the wireless card through DHCP ETH0 (wired nic card) is set up to be 10.10.10.0 and the server is 10.10.10.1) I am not a linux or networking guru but basically I am trying to have internet come from a guest network 192.168.1.0 i believe to give internet to the ubuntu server then the ubuntu server will also A) have the wired nic serve DHCP addresses to other computers via a switch or router (that acts as a switch) via 10.10.10.0 addresses. And I would love if it also passed along internet capabilities as well if possible. Bu really at this point my hope is to at least get the internet working on the server and the DHCP to pass correctly. At the moment the specific issue I am having is getting ubuntu server to connect to the internet and have both nic cards up and running correctly. Any help would be appreciated! The route table is as follows: Destination Gateway GM Flags Metric Iface 0.0.0.0 10.10.10.1 0.0.0.0 UG 100 eth0 10.10.10.0 0.0.0.0 255.255.255.0 U 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 eth0 1992.168.1.0 0.0.0.0 255.255.255.255.0 U 0 eth1 My interfaces is set up as follows: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.10.10.1 netmask 255.255.255.0 network 10.10.10.0 broadcast 10.10.10.255 gateway 10.10.10.1 domain-name-servers 192.168.1.0 auto eth1 iface eth1 inet dhcp netmask 255.255.255.0 gateway 192.168.1.0 wpa-driver wext wpa-ssid "ssid_name" wpa-ap-scan 1 wpa-proto wpa wpa-pairwise ccmp wpa-group ccmp wpa-key-mgmt wpa-psk wpa-psk "HASH" My DHCPD.conf (as there is a domain name server on here is as follows): ddns-update-style none default-lease-time 600 max-lease-time 7200 authoritative option domain-name "Kamron's Network" option subnet-mask 255.255.255.0 option broadcast-address 10.10.10.255 option routers 192.168.1.0 option domain-name-server 192.168.1.0 98.223.128.213 ooption subnet 10.10.10.0 netmask 255.255.255.0 { range 10.10.10.10 10.10.10.99 } log-facility local7

  Read the article

• 81% of European Shoppers Willing to Pay More for Better Customer Experience

  - by Richard Lefebvre

  Customer Experience provides strategic driver for business growth Research released today from Oracle has revealed that customer experience is now a key driver for revenue growth in Europe, and an effective channel for brand differentiation in a globalized economy where products and services are increasingly commoditized. The research report, “Why Customer Satisfaction is No Longer Good Enough,” reveals that 81% of consumers surveyed are willing to pay more for superior customer experience. With nearly half (44%) willing to pay a premium of more than 5%. Improvement of the overall customer experience (40%), providing quick access to information and making it easier for customers to ask questions (35%) were cited as key drivers for spending more with a brand. The pan-European research, carried out in June 2012 by independent research company Loudhouse, surveyed 1400 online shoppers (50% female, 50% male) who had made a complaint or enquiry to a customer service department in the last 12 months. For full research findings please go to: http://bit.ly/UwmB3j or check the Press Release

  Read the article

• Virtual Newsstand Displays Comic Books by Date

  - by Jason Fitzpatrick

  If you’re a comic book aficionado (or just want to take a stroll down memory lane), this virtual newsstand shows you all the comics published for any month and year going all the way back to the 1930s. Courtesy of Mike’s Amazing World of Comics, the virtual newsstand lets you dial in a month, year, sorting style, and shows all publishers or select publishers. The covers are displayed in a grid where you can click through to see a larger version of the cover and read additional information about the comic. It’s a really neat way to check out trends in comic design and artwork over the years. Hit up the link below to take it for the spin. Have a cool comic book resource to share? Sound off in the comments. The Newsstand [via Boing Boing] Why Enabling “Do Not Track” Doesn’t Stop You From Being Tracked HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference

  Read the article

• 12.10 unable to connect to the Internet using Chrome or Firefox

  - by Thomas Anderson

  I received a software update for Ubuntu 12.10 while using Zorin OS6 wireless. I accepted the update and installed 12.10. Please tell me the step by step, using layman's terms, on how to get Google Chrome, or Mozilla Firefox to connect to the Internet? I am receiving DNS server error with both browsers. I can connect to my router wired or wireless. I posted and received initial information but was not sure exactly what some of the terms were and or what to do next etc. I am not necessarily familiar with some technical terms, or do I need to install additional plug-ins? I do not know what proxy or DCHP means or what do with these terms please, please help. I am not a programmer, nor do I work in IT. Again please help.

  Read the article

• sound stopped working after upgrade to 11.10 on Tuesday 20th March

  - by Hugh Barney

  My sound card stopped working after a set of updates were installed 2 days ago. The sound card is detected, the volume is not muted and the speakers work, I can make the speakers hum if I touch the jack plug lead that normally plugs into the card. hugh@lindisfarne:~$ lspci -v | grep -A7 -i "audio" 07:01.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster Subsystem: Creative Labs SB0570 [SB Audigy SE] Flags: bus master, medium devsel, latency 32, IRQ 16 I/O ports at c000 [size=32] Capabilities: Kernel driver in use: CA0106 Kernel modules: snd-ca0106 I've tried reverting those upgraded packages that look like the could impact the kernal - but to no avail. alsamixer does not have anything muted, I've been though all the sound card debug/troubleshooting pages I can find. Kernal driver is attached. So whats gone pop ? I will boot from CD to check - but I am pretty sure this is a sw and not a hw problem.

  Read the article

• Leaked Gmail for Android Version 4.2 Features Pinch-to-Zoom and Swipe-to-Delete [Video]

  - by Jason Fitzpatrick

  If you love keeping an eye at what’s around the corner, this video showcases some of the new features in Gmail for Android–there’s even an APK for those adventurous readers who want to try it. Courtesy of AndroidPolice, we’re treated to the above video showcasing Gmail for Android’s new look and features–including pinch-to-zoom and a swipe-to-delete (or archive), similar to the notification dismissal in Android Jelly Bean. If you’re up for a little unofficial app installation, you can even hit up the link below to check out the full writeup and grab a copy of the unofficial installer. Exclusive: Upcoming Gmail For Android 4.2 Will Finally Have Pinch-To-Zoom, Swipeaway Delete/Archive [AndroidZoom] HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

  Read the article

• How to Make a 9 Layer Density Column [Video]

  - by Jason Fitzpatrick

  Density columns, layers of varying density liquid in a glass cylinder, are nothing new in the world of science demonstrations, but this nine layer one with seven floating objects is something to see. Courtesy of Steve Spangler Science, the experiment goes above and beyond the traditional five layer column by adding another four layers and sinking objects of varying density into the column. The end result is a colorful demonstration of the varying densities of liquids and solids. [via Boing Boing] How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems 7 Ways To Free Up Hard Disk Space On Windows

  Read the article

• How can I assign actions to all my mouse buttons?

  - by torbengb

  I have a mouse with lots of buttons, but it's not a mainstream make like Logitech. For Windows, I have a driver that lets me assign actions like close-window (Ctrl+W) or next-tab (Ctrl+Tab), but I don't have a Linux driver. Since Linux is so flexible, I thought perhaps there is a general way to do this, regardless of brand? Update: Based on input from Cyrex, I installed and ran sudo apt-get install btnx which found several but not all mouse buttons. Found: left, right, wheel, wheelclick, thumb fwd, thumb back. Not found: wheel left, wheel right, thumb middle button. Vendor ID is 0x04d9, Model ID is 0xa015.

  Read the article

• Suspend/hibernate doesn't work on an Asus Laptop

  - by b1ackjosh

  I'm having issues suspending 11.04 on my new Asus U30sd-XA1 laptop, it's a new laptop on the market and I'm wondering if anyone else has had this issue and maybe have a fix for it. Basically whenever I close or put the laptop to sleep the screen goes black but the video card doesn't actually turn off, then the fan spins up even faster then it was before and gets hot. I did see that some people were having similar issues on other laptops and they set the kernal back. I'm newish to ubuntu and I'm not super comfortable messing with the kernal. If anyone has any other solutions that would be great. I am not using the 520m nvidia driver because it won't load unity after it's installed. I've also heard quite a few bad things about the drivers on the ubuntu forums, so I deactivated the driver.

  Read the article

• Ubuntu 13.10 and Dell Inspiron 7520 SE (Intel 4000 and ATI radeon HD 7730m)

  - by pjgowtham

  I installed 13.10 and i have problems with my display. Everything else works fine. I cant control my brightness. I thought the graphics driver is the problem. So i went to software updates, switched to another driver (proprietary) and the Ubuntu screen went black and i wasn't able to boot either. I cant use my lap with such low brightness. Then i reinstalled 13.10 again, This time full hdd reset. Same problem occurred. I grabbed radeon hd7730m for Linux x64 from the amd site, installed it, and the screen went black with only the "x" cursor showing on the next boot. What should i need to do to make my brightness work and stabilize graphic cards as mine is switchable graphics type.

  Read the article

• Alsa version numbers not consistent

  - by user69245

  I've recently moved from 10.04 to 12.04 and have problems with crackles on audio when the screen changes (especially obvious in a Skype conversation with video). !!Kernel Information !!------------------ Kernel release: 3.2.0-26-generic-pae Operating System: GNU/Linux Architecture: i686 Processor: i686 SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.24 Library version: 1.0.25 Utilities version: 1.0.25 Running through the SoundTroubleShooting procedures I got the above details at Step 3. Is the mismatch between the Driver version (1.0.24) and the Library and Utilities versions (1.0.25) the cause of my problem, or should I be looking elsewhere? In answers to the question "Will ALSA 1.0.25 version have time to enter 12.04?" I read that 1.0.25 would be part of the new kernel, but my kernel version appears to be newer than the original release.

  Read the article

• Does the latest version of Ubuntu (12.04) support Unity 3D?

  - by Douglas Combs

  I just installed the latest version of Ubuntu (12.04) 64bit. I am using a Radeon HD 7750 vid card. I think I have the Catalyst driver installed correctly. But when I go to system and look at the details, it shows that my graphics is VESA:01. Does this mean I it, I didn't correctly install my driver? System Specs: MB: ASUS P7P55-M CPU: Intel i5 Quad Core MEM: 4GB DD3 VC: HIS Radeon HD 7750 (1GB DDR5) Thanks for help.

  Read the article

< Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >