Search Results

Search found 13434 results on 538 pages for 'boot on power up'.

Page 176/538 | < Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >

  • How do I upgrade the BIOS to boot the motherboard when the CPU is not suported?

    - by Matt
    So I have a Tyan S8225 motherboard with a Valencia (Opteron 4200) CPU. Two of us have tried everything. We have even swapped the whole motherboard, Power supply, memory, even a different CPU (still Valencia). We even tried it without any memory installed and with only a single CPU. There are no beep codes as I suspect even those are controlled by the BIOS boot process. We put the whole thing on the bench with just the power supply, VGA, keyboard and network (for IPMI) connected. The IPMI is not even showing the BIOS starting, but the IPMI is working. After some hunting around, I discovered the claim on the website is that the Valencia CPU's are not supported on older BIOS revisions. For a start, I don't know what the bios revision is and if it's older but it's the only thing left. Could the BIOS be causing a board not to boot at all? If that's the case, then is there any other way to update the BIOS without buying an old CPU only to be put back in a box just to update the BIOS? Yes, we even tried updating the BIOS through IPMI but you can't do that either.

    Read the article

  • How to get data out of a Maxtor Shared Storage II that fails to boot?

    - by Jonik
    I've got a Maxtor Shared Storage II (RAID1 mode) which has developed some hardware failure, apparently: it fails to boot properly and is unreachable via network. When powering it on, it keeps making clunking/chirping disk noise and then sort of resets itself (with a flash of orange light in the usually-green LEDs); it then repeats this as if stuck in a loop. In fact, even the power button does nothing now – the only way I can affect the device at all is to plug in or pull out the power cord! (To be clear, I've come to regard this piece of garbage (which cost about 460 €) as my worst tech purchase ever. Even before this failure I had encountered many annoyances about the drive: 1) the software to manage it is rather crappy; 2) it is way noisier that what this type of device should be; 3) when your Mac comes out of sleep, Maxtor's "EasyManage" cannot re-mount the drive automatically.) Anyway, the question at hand is how to get my data out of it? As a very concrete first step, is there a way to open this thing without breaking the plastic casing into pieces? It is far from obvious to me how to get beyond this stage; it opens a little from one end but not from the other. If I somehow got the disks out, I could try mounting the disk(s) on one of the Macs or Linux boxes I have available (although I don't know yet if I'd need some adapters for that). (NB: for the purposes of this question, never mind any warranty or replacement issues – that's secondary to recovering the data.)

    Read the article

  • cannot make ubuntu 64-bit v12.04 install work

    - by honestann
    I decided it was time to update my ubuntu (single boot) computer from 64-bit v10.04 to 64-bit v12.04. Unfortunately, for some reason (or reasons) I just can't make it work. Note that I am attempting a fresh install of 64-bit v12.04 onto a new 3TB hard disk, not an upgrade of the 1TB hard disk that contains my working 64-bit v10.04 installation. To perform the attempted install of v12.04 I unplug the SATA cable from the 1TB drive and plug it into the 3TB drive (to avoid risking damage to my working v10.04 installation). I downloaded the ubuntu 64-bit v12.04 install DVD ISO file (~1.6 GB) from the ubuntu releases webpage and burned it onto a DVD. I have downloaded the DVD ISO file 3 times and burned 3 of these installation DVDs (twice with v10.04 and once with my winxp64 system), but none of them work. I run the "check disk" on the DVDs at the beginning of the installation process to assure the DVD is valid. When installation completes and the system boots the 3TB drive, it reports "unknown filesystem". After installation on the 250GB drives, the system boots up fine. During every install I plug the same SATA cable (sda) into only one disk drive (the 3TB or one of the 250GB drives) and leave the other disk drives unconnected (for simplicity). It is my understanding that 64-bit ubuntu (and 64-bit linux in general) has no problem with 3TB disk drives. In the BIOS I have tried having EFI set to "enabled" and "auto" with no apparent difference (no success). I never bothered setting the BIOS to "non-EFI". I have tried partitioning the drive in a few ways to see if that makes a difference, but so far it has not mattered. Typically I manually create partitions something like this: 8GB /boot ext4 8GB swap 3TB / ext4 But I've also tried the following, just in case it matters: 8GB boot efi 8GB swap 8GB /boot ext4 3TB / ext4 Note: In the partition dialog I specify bootup on the same drive I am partitioning and installing ubuntu v12.04 onto. It is a VERY DANGEROUS FACT that the default for this always comes up with the wrong drive (some other drive, generally the external drive). Unless I'm stupid or misunderstanding something, this is very wrong and very dangerous default behavior. Note: If I connect the SATA cable to the 1TB drive that has been my ubuntu 64-bit v10.04 system drive for the past 2 years, it boots up and runs fine. I guess there must be a log file somewhere, and maybe it gives some hints as to what the problem is. I should be able to boot off the 1TB drive with the 3TB drive connected as a secondary (non-boot) drive and get the log file, assuming there is one and someone tells me the name (and where to find it if the name is very generic). After installation on the 3TB drive completes and the system reboots, the following prints out on a black screen: Loading Operating System ... Boot from CD/DVD : Boot from CD/DVD : error: unknown filesystem grub rescue> Note: I have two DVD burners in the system, hence the duplicate line above. Note: I install and boot 64-bit ubuntu v12.04 on both of my 250GB in this same system, but still cannot make the 3TB drive boot. Sigh. Any ideas? ========== motherboard == gigabyte 990FXA-UD7 CPU == AMD FX-8150 8-core bulldozer @ 3.6 GHz RAM == 8GB of DDR3 in 2 sticks (matched pair) HDD == seagate 3TB SATA3 @ 7200 rpm (new install 64-bit v12.04 FAILS) HDD == seagate 1TB SATA3 @ 7200 rpm (64-bit v10.04 WORKS for two years) HDD == seagate 250GB SATA2 @ 7200 rpm (new install 64-bit v12.04 WORKS) HDD == seagate 250GB SATA2 @ 7200 rpm (new install 64-bit v12.04 WORKS) GPU == nvidia GTX-285 ??? == no overclocking or other funky business USB == external seagate 2TB HDD for making backups DVD == one bluray burner (SATA) DVD == one DVD burner (SATA) 64-bit ubuntu v10.04 has booted and run fine on the seagate 1TB drive for 2 years.

    Read the article

  • Plymouth and GRUB do not show at all

    - by WarriorIng64
    I am using Ubuntu 11.04 64-bit as my only OS on my desktop computer, which used to only run Ubuntu 10.04 LTS until I had the time to upgrade it with a fresh install. It uses integrated NVIDIA graphics (listed as a GeForce 6150SE nForce 430 by the NVIDIA X Server Settings utility) with the current proprietary driver as provided by the Additional Drivers utility, and has a VGA connection to a 1680x1050 Acer monitor. I used to get the (ugly-looking version of) Plymouth graphical boot screen while under 10.04. It didn't look that great, but I was fine with it. Now, it doesn't show on 11.04 at all during boot (I just get an error message in a moving gray box from the monitor saying "Input Not Supported"), and only rarely it will show on shutdown, all garbled up. I could not get GRUB to show during boot while holding down Shift, either (same error message), but pressing Enter while it should be up starts the system normally. A picture of the error message I was getting: Once fully booted, the system still shows the login screen and desktop just fine. Any information on how to troubleshoot this would be appreciated. If there's any hardware-specific stuff I forgot to include here, let me know the relevant commands to run in a comment below. Things that I've tried: Running plymouth in a framebuffer: no effect Booting with nomodeset as my grub boot: option no effect Booting with nomodeset and plymouth in a framebuffer: no effect other than Plymouth showing during shutdown only Following the Softpedia instructions for fixing Plymouth's resolution: Problem mostly solved, except logo does not show in Plymouth during boot, and both grub and Plymouth are slightly off-center #4 above, but with nomodeset removed as a grub boot option: same effect as #4 #5 above, but with vt.handoff=7 added as a grub boot option: same effect as #4 I have added the current contents of /etc/default/grub as requested in the comments: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' GRUB_GFXMODE=1280x1024 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" CURRENT STATUS: I forgot to uncomment one line as per "things that I've tried" #4, so I took care of that. I can now see GRUB during startup when I hold Shift and a normal-looking Plymouth during shutdown...but Plymouth during boot is now just a solid purple screen. In each case, it's displayed a little off-center to the left, with a thin black bar running down the right side of the monitor. The error pictured above no longer shows. I'd say this problem is about 2/3 solved now. UPDATE: After Natty started freezing up on me, I decided to dual-boot with Oneiric, which unfortunately shows the same problems. Rather than trying all these workarounds though, I decided to do what I should have done from the start and file a pair of bug reports. LAST UPDATE: Bug 850908 has been confirmed as a legitimate nouveaufb bug. I have overwritten my 11.04 partition with 12.04 LTS, and I can confirm at this time that the issue is present there, as well. I will now flag this question to be closed, yet I hope it was helpful for anyone who experienced similar issues; if you are still having the same problem as me, please go there and mark yourself as affected. Thanks!

    Read the article

  • Swap Mouse Buttons on startup

    - by andy boot
    This one bugs me. I fashioned this handy script to swap the left and right mouse buttons over: [My mouse is a Razer] /usr/bin/xinput set-button-map `xinput list | grep 'Razer' | grep -o \=[0-9]* | grep -o [0-9]*$` 3 2 1 4 5 6 7 8 1 10 11 12 13 When I run this in a Terminal it works. When I go to Startup Application Preferences - Add and then literally paste the above into the command field as an 'Additional startup program' It does not run on startup. Why not? I'm using Ubuntu 11-10 but this also applied to the 10-10

    Read the article

  • Java Errors with jRuby on Rails on Google App Engine

    - by John Wang
    I followed all of the instructions so far from: http://code.google.com/p/appengine-jruby/wiki/RunningRails and http://gist.github.com/268192 Currently, I'm just trying to get to hello world. I'm getting these errors when I just run the dev_appserver.rb 238:hello-world jwang392$ dev_appserver.rb . => Booting DevAppServer => Press Ctrl-C to shutdown server => Generating configuration files 2010-04-08 09:16:51.961 java[411:1707] [Java CocoaComponent compatibility mode]: Enabled 2010-04-08 09:16:51.964 java[411:1707] [Java CocoaComponent compatibility mode]: Setting timeout for SWT to 0.100000 Apr 8, 2010 7:17:05 PM com.google.appengine.tools.development.ApiProxyLocalImpl log SEVERE: [1270754225387000] javax.servlet.ServletContext log: Warning: error application could not be initialized org.jruby.rack.RackInitializationException: no such file to load -- time from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25:in `boot!' from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/boot/rack.rb:10 from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1:in `load' from <script>:1 at org.jruby.rack.DefaultRackApplicationFactory $4.init(DefaultRackApplicationFactory.java:169) at org.jruby.rack.DefaultRackApplicationFactory.newErrorApplication(DefaultRac kApplicationFactory.java: 118) at org.jruby.rack.DefaultRackApplicationFactory.init(DefaultRackApplicationFac tory.java: 37) at org.jruby.rack.SharedRackApplicationFactory.init(SharedRackApplicationFacto ry.java: 26) at org.jruby.rack.RackServletContextListener.contextInitialized(RackServletCon textListener.java: 40) at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java: 530) at org.mortbay.jetty.servlet.Context.startContext(Context.java:135) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java: 1218) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java: 500) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java: 448) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 117) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 117) at org.mortbay.jetty.Server.doStart(Server.java:217) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at com.google.appengine.tools.development.JettyContainerService.startContainer (JettyContainerService.java: 188) at com.google.appengine.tools.development.AbstractContainerService.startup(Abs tractContainerService.java: 147) at com.google.appengine.tools.development.DevAppServerImpl.start(DevAppServerI mpl.java: 219) at com.google.appengine.tools.development.DevAppServerMain $StartAction.apply(DevAppServerMain.java:162) at com.google.appengine.tools.util.Parser $ParseResult.applyArgs(Parser.java:48) at com.google.appengine.tools.development.DevAppServerMain.<init>(DevAppServer Main.java: 113) at com.google.appengine.tools.development.DevAppServerMain.main(DevAppServerMa in.java: 89) Caused by: org.jruby.exceptions.RaiseException: no such file to load -- time at (unknown).new(file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25) at Kernel.require(file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25) at JRuby::Rack::Booter.boot!(file:/Users/jwang392/hello-world/WEB-INF/ lib/jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:10) at (unknown).(unknown)(file:/Users/jwang392/hello-world/WEB-INF/lib/ jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1) at (unknown).(unknown)(file:/Users/jwang392/Dhello-world/WEB-INF/lib/ jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1) at Kernel.load(<script>:1) at (unknown).(unknown)(:1) Apr 8, 2010 7:17:05 PM com.google.appengine.tools.development.ApiProxyLocalImpl log SEVERE: [1270754225913000] javax.servlet.ServletContext log: unable to create shared application instance org.jruby.rack.RackInitializationException: no such file to load -- time from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25:in `boot!' from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/boot/rack.rb:10 from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1:in `load' from <script>:1 at org.jruby.rack.DefaultRackApplicationFactory $4.init(DefaultRackApplicationFactory.java:169) at org.jruby.rack.DefaultRackApplicationFactory.getApplication(DefaultRackAppl icationFactory.java: 51) at org.jruby.rack.SharedRackApplicationFactory.init(SharedRackApplicationFacto ry.java: 27) at org.jruby.rack.RackServletContextListener.contextInitialized(RackServletCon textListener.java: 40) at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java: 530) at org.mortbay.jetty.servlet.Context.startContext(Context.java:135) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java: 1218) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java: 500) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java: 448) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 117) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 117) at org.mortbay.jetty.Server.doStart(Server.java:217) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at com.google.appengine.tools.development.JettyContainerService.startContainer (JettyContainerService.java: 188) at com.google.appengine.tools.development.AbstractContainerService.startup(Abs tractContainerService.java: 147) at com.google.appengine.tools.development.DevAppServerImpl.start(DevAppServerI mpl.java: 219) at com.google.appengine.tools.development.DevAppServerMain $StartAction.apply(DevAppServerMain.java:162) at com.google.appengine.tools.util.Parser $ParseResult.applyArgs(Parser.java:48) at com.google.appengine.tools.development.DevAppServerMain.<init>(DevAppServer Main.java: 113) at com.google.appengine.tools.development.DevAppServerMain.main(DevAppServerMa in.java: 89) Caused by: org.jruby.exceptions.RaiseException: no such file to load -- time at (unknown).new(file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25) at Kernel.require(file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25) at JRuby::Rack::Booter.boot!(file:/Users/jwang392/hello-world/WEB-INF/ lib/jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:10) at (unknown).(unknown)(file:/Users/jwang392/hello-world/WEB-INF/lib/ jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1) at (unknown).(unknown)(file:/Users/jwang392/hello-world/WEB-INF/lib/ jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1) at Kernel.load(<script>:1) at (unknown).(unknown)(:1) Apr 8, 2010 7:17:05 PM com.google.appengine.tools.development.ApiProxyLocalImpl log SEVERE: [1270754225915000] javax.servlet.ServletContext log: Error: application initialization failed org.jruby.rack.RackInitializationException: unable to create shared application instance at org.jruby.rack.SharedRackApplicationFactory.init(SharedRackApplicationFacto ry.java: 39) at org.jruby.rack.RackServletContextListener.contextInitialized(RackServletCon textListener.java: 40) at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java: 530) at org.mortbay.jetty.servlet.Context.startContext(Context.java:135) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java: 1218) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java: 500) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java: 448) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 117) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 117) at org.mortbay.jetty.Server.doStart(Server.java:217) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at com.google.appengine.tools.development.JettyContainerService.startContainer (JettyContainerService.java: 188) at com.google.appengine.tools.development.AbstractContainerService.startup(Abs tractContainerService.java: 147) at com.google.appengine.tools.development.DevAppServerImpl.start(DevAppServerI mpl.java: 219) at com.google.appengine.tools.development.DevAppServerMain $StartAction.apply(DevAppServerMain.java:162) at com.google.appengine.tools.util.Parser $ParseResult.applyArgs(Parser.java:48) at com.google.appengine.tools.development.DevAppServerMain.<init>(DevAppServer Main.java: 113) at com.google.appengine.tools.development.DevAppServerMain.main(DevAppServerMa in.java: 89) Caused by: org.jruby.rack.RackInitializationException: no such file to load -- time from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25:in `boot!' from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/boot/rack.rb:10 from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1:in `load' from <script>:1 at org.jruby.rack.DefaultRackApplicationFactory $4.init(DefaultRackApplicationFactory.java:169) at org.jruby.rack.DefaultRackApplicationFactory.getApplication(DefaultRackAppl icationFactory.java: 51) at org.jruby.rack.SharedRackApplicationFactory.init(SharedRackApplicationFacto ry.java: 27) ... 19 more Caused by: org.jruby.exceptions.RaiseException: no such file to load -- time at (unknown).new(file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25) at Kernel.require(file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25) at JRuby::Rack::Booter.boot!(file:/Users/jwang392/hello-world/WEB-INF/ lib/jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:10) at (unknown).(unknown)(file:/Users/jwang392/hello-world/WEB-INF/lib/ jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1) at (unknown).(unknown)(file:/Users/jwang392/hello-world/WEB-INF/lib/ jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1) at Kernel.load(<script>:1) at (unknown).(unknown)(:1) The server is running at http://localhost:8080/ I'm at a loss at what step I may have missed. I checked my ruby version (1.8.7) and rails version (2.3.5), gem version (1.3.6) and google-appengine-0.0.10.1 ran: sudo gem install google-appengine curl -O http://appengine-jruby.googlecode.com/hg/demos/rails2/rails2_appengine.rb ruby rails2_appengine.rb sudo gem install rails_dm_datastore sudo gem install activerecord-nulldb-adapter put this in my config.ru file: run lambda { |env| Rack::Response.new('Hello World!').finish } and finally ran $ dev_appserver.rb .

    Read the article

  • How can I do Ubuntu Lucid Desktop installation with HTTP preseed?

    - by netvope
    Installation media: ubuntu-10.04-desktop-i386.iso I tried a lot of different boot parameters, but either the installer ignored the preseed configuration, or it boot itself directly as LiveCD. An example of the boot parameters I've tried: auto url=http://mydomain.com/path/preseed.cfg boot=casper only-ubiquity initrd=/casper/initrd.lz quiet splash -- If I remove only-ubiquity, it boots as a LiveCD. If I remove boot=casper, it won't boot. If I add vga=normal locale=en_US console-setup/layoutcode=us console-setup/ask_detect=false interface=auto, it still can't do automatic install. If I remove auto, it's the same. What is the correct boot parameters for launching such an installation? From the apache log of the server hosting preseed.cfg, I see that the installer has no problems fetching the preseed file. My preseed file is almost identical to the one at https://help.ubuntu.com/10.04/installation-guide/example-preseed.txt. Moreover, I have run debconf-set-selections -c preseed.cfg to ensure that the preseed file is correct.

    Read the article

  • ubuntu-10.04-desktop-i386 does not work with HTTP preseed?

    - by netvope
    Installation media: ubuntu-10.04-desktop-i386.iso I tried a lot of different boot parameters, but either the installer ignored the preseed configuration, or it boot itself directly as LiveCD. An example of the boot parameters I've tried: auto url=http://mydomain.com/path/preseed.cfg boot=casper only-ubiquity initrd=/casper/initrd.lz quiet splash -- If I remove only-ubiquity, it boots as a LiveCD. If I remove boot=casper, it won't boot. If I add vga=normal locale=en_US console-setup/layoutcode=us console-setup/ask_detect=false interface=auto, it still can't do automatic install. If I remove auto, it's the same. What is the correct boot parameters for launching such an installation? From the apache log of the server hosting preseed.cfg, I see that the installer has no problems fetching the preseed file. My preseed file is almost identical to the one at https://help.ubuntu.com/10.04/installation-guide/example-preseed.txt. Moreover, I have run debconf-set-selections -c preseed.cfg to ensure that the preseed file is correct.

    Read the article

  • Multiple PXE server same subnet

    - by Termiux
    I've been struggling with this for some time. I have a few test machines that boot from the network, they receive the boot data from the DHCP server, this tells them who is the boot server where is the file they'll boot etc. However, I need to add a second PXE server in the same subnet (create another Vlan is not an option right now). I read somewhere that I may be able to send certain parameters to certain machines based on their MAC address (this way choosing what computers boot from what server) however I cannot find how to do this, anyone knows how? this will be my solution but I cannot find the answer. My DHCP is a windows server 2003 I have 2 servers running custom flavors of Linux server as TFTP servers. Some machines use data to boot from server 1, and the others must bu able to boot from server 2. Thx

    Read the article

  • How to get HTTP preseed to work correctly on Ubuntu 10.04 LTS (Lucid)?

    - by netvope
    Installation media: ubuntu-10.04-desktop-i386.iso I tried a lot of different boot parameters, but either the installer ignored the preseed configuration, or it boot itself directly as LiveCD. An example of the boot parameters I've tried: auto url=http://mydomain.com/path/preseed.cfg boot=casper only-ubiquity initrd=/casper/initrd.lz quiet splash -- If I remove only-ubiquity, it boots as a LiveCD. If I remove boot=casper, it won't boot. If I add vga=normal locale=en_US console-setup/layoutcode=us console-setup/ask_detect=false interface=auto, it still can't do automatic install. If I remove auto, it's the same. What is the correct boot parameters for launching such an installation? From the apache log of the server hosting preseed.cfg, I see that the installer has no problems fetching the preseed file. My preseed file is almost identical to the one at https://help.ubuntu.com/10.04/installation-guide/example-preseed.txt. Moreover, I have run debconf-set-selections -c preseed.cfg to ensure that the preseed file is correct.

    Read the article

  • Installing Ubuntu on an Asus Vivotab Smart Windows 8 32-bit processor tablet

    - by Ikenna
    Good day, I just got an Asus Vivotab Smart with Windows 8 but the processor is actually a 32-bit type. I am kinda confused with the Ubuntu version to install (32-bit or 64-bit). I have read all the tips and guidelines on installing Ubuntu on a Windows 8 machine. I have disabled fast boot, quiet boot, secure boot, and still cannot boot from the usb. I tried this with Ubuntu 12.04.2, 12.10, and 13.04 (the 64-bit versions only). I am yet to try a 32-bit version but I'm reluctant since Canonical says only the 64-bit version was developed to handle the Windows 8 UEFI issues. Also, I have a boot-override field in my UEFI options which I think force-boots from the boot option one selects. I selected to force-boot from my pendrive containing Ubuntu, but the screen just blinks momentarily and nothing happens. Please help me to figure out how to load ubuntu on my machine. I don't really want the Windows 8......just Ubuntu on my tablet. Thank you.

    Read the article

  • How do I make changes to /proc/acpi/wakeup permanent?

    - by Jolan
    I had a problem with my Ubuntu 12.04 waking up immediately after going into suspend. I solved the problem by changing the settings in /proc/acpi/wakeup, as suggested in this question: How do I prevent immediate wake up from suspend?. After changing the settings, the system goes flawlessly into suspend and stays suspended, but after I wake it back up, the settings in /proc/acpi/wakeup are different from what I set them to. Before going to suspend: cat /proc/acpi/wakeup Device S-state Status Sysfs node SMB0 S4 *disabled pci:0000:00:03.2 PBB0 S4 *disabled pci:0000:00:09.0 HDAC S4 *disabled pci:0000:00:08.0 XVR0 S4 *disabled pci:0000:00:0c.0 XVR1 S4 *disabled P0P5 S4 *disabled P0P6 S4 *disabled pci:0000:00:15.0 GLAN S4 *enabled pci:0000:03:00.0 P0P7 S4 *disabled pci:0000:00:16.0 P0P8 S4 *disabled P0P9 S4 *disabled USB0 S3 *disabled pci:0000:00:04.0 USB2 S3 *disabled pci:0000:00:04.1 US15 S3 *disabled pci:0000:00:06.0 US12 S3 *disabled pci:0000:00:06.1 PWRB S4 *enabled SLPB S4 *enabled I tell the system to suspend, and it works as it should. But later after waking it up, the settings are changed to either: USB0 S3 *disabled pci:0000:00:04.0 USB2 S3 *enabled pci:0000:00:04.1 US15 S3 *disabled pci:0000:00:06.0 US12 S3 *enabled pci:0000:00:06.1 or USB0 S3 *enabled pci:0000:00:04.0 USB2 S3 *enabled pci:0000:00:04.1 US15 S3 *enabled pci:0000:00:06.0 US12 S3 *enabled pci:0000:00:06.1 Any ideas? Thank you for your response. Unfortunately it did not solve my problem. all of /sys/bus/usb/devices/usb1/power/wakeup /sys/bus/usb/devices/usb2/power/wakeup /sys/bus/usb/devices/usb3/power/wakeup /sys/bus/usb/devices/usb4/power/wakeup as well as /sys/bus/usb/devices/3-1/power/wakeup are set to disabled, and the notebook still wakes up by itself right after going to sleep. The only thing it seems to react to are the settings in /proc/acpi/wakeup, which keep changing (resetting) every time i power off/restart my notebook.

    Read the article

  • Microsoft&rsquo;s new technical computing initiative

    - by Randy Walker
    I made a mental note from earlier in the year.  Microsoft literally buys computers by the truckload.  From what I understand, it’s a typical practice amongst large software vendors.  You plug a few wires in, you test it, and you instantly have mega tera tera flops (don’t hold me to that number).  Microsoft has been trying to plug away at their cloud services (named Azure).  Which, for the layman, means Microsoft runs your software on their computers, and as demand increases you can allocate more computing power on the fly. With this in mind, it doesn’t surprise me that I was recently sent an executive email concerning Microsoft’s new technical computing initiative.  I find it to be a great marketing idea with actual substance behind their real work.  From the programmer academic perspective, in college we dreamed about this type of processing power.  This has decades of computer science theory behind it. A copy of the email received.  (note that I almost deleted this email, thinking it was spam due to it’s length) We don't often think about how complex life really is. Take the relatively simple task of commuting to and from work: it is, in fact, a complicated interplay of variables such as weather, train delays, accidents, traffic patterns, road construction, etc. You can however, take steps to shorten your commute - using a good, predictive understanding of a few of these variables. In fact, you probably are already taking these inputs and instinctively building a predictive model that you act on daily to get to your destination more quickly. Now, when we apply the same method to very complex tasks, this modeling approach becomes much more challenging. Recent world events clearly demonstrated our inability to process vast amounts of information and variables that would have helped to more accurately predict the behavior of global financial markets or the occurrence and impact of a volcano eruption in Iceland. To make sense of issues like these, researchers, engineers and analysts create computer models of the almost infinite number of possible interactions in complex systems. But, they need increasingly more sophisticated computer models to better understand how the world behaves and to make fact-based predictions about the future. And, to do this, it requires a tremendous amount of computing power to process and examine the massive data deluge from cameras, digital sensors and precision instruments of all kinds. This is the key to creating more accurate and realistic models that expose the hidden meaning of data, which gives us the kind of insight we need to solve a myriad of challenges. We have made great strides in our ability to build these kinds of computer models, and yet they are still too difficult, expensive and time consuming to manage. Today, even the most complicated data-rich simulations cannot fully capture all of the intricacies and dependencies of the systems they are trying to model. That is why, across the scientific and engineering world, it is so hard to say with any certainty when or where the next volcano will erupt and what flight patterns it might affect, or to more accurately predict something like a global flu pandemic. So far, we just cannot collect, correlate and compute enough data to create an accurate forecast of the real world. But this is about to change. Innovations in technology are transforming our ability to measure, monitor and model how the world behaves. The implication for scientific research is profound, and it will transform the way we tackle global challenges like health care and climate change. It will also have a huge impact on engineering and business, delivering breakthroughs that could lead to the creation of new products, new businesses and even new industries. Because you are a subscriber to executive e-mails from Microsoft, I want you to be the first to know about a new effort focused specifically on empowering millions of the world's smartest problem solvers. Today, I am happy to introduce Microsoft's Technical Computing initiative. Our goal is to unleash the power of pervasive, accurate, real-time modeling to help people and organizations achieve their objectives and realize their potential. We are bringing together some of the brightest minds in the technical computing community across industry, academia and science at www.modelingtheworld.com to discuss trends, challenges and shared opportunities. New advances provide the foundation for tools and applications that will make technical computing more affordable and accessible where mathematical and computational principles are applied to solve practical problems. One day soon, complicated tasks like building a sophisticated computer model that would typically take a team of advanced software programmers months to build and days to run, will be accomplished in a single afternoon by a scientist, engineer or analyst working at the PC on their desktop. And as technology continues to advance, these models will become more complete and accurate in the way they represent the world. This will speed our ability to test new ideas, improve processes and advance our understanding of systems. Our technical computing initiative reflects the best of Microsoft's heritage. Ever since Bill Gates articulated the then far-fetched vision of "a computer on every desktop" in the early 1980's, Microsoft has been at the forefront of expanding the power and reach of computing to benefit the world. As someone who worked closely with Bill for many years at Microsoft, I am happy to share with you that the passion behind that vision is fully alive at Microsoft and is carried out in the creation of our new Technical Computing group. Enabling more people to make better predictions We have seen the impact of making greater computing power more available firsthand through our investments in high performance computing (HPC) over the past five years. Scientists, engineers and analysts in organizations of all sizes and sectors are finding that using distributed computational power creates societal impact, fuels scientific breakthroughs and delivers competitive advantages. For example, we have seen remarkable results from some of our current customers: Malaria strikes 300,000 to 500,000 people around the world each year. To help in the effort to eradicate malaria worldwide, scientists at Intellectual Ventures use software that simulates how the disease spreads and would respond to prevention and control methods, such as vaccines and the use of bed nets. Technical computing allows researchers to model more detailed parameters for more accurate results and receive those results in less than an hour, rather than waiting a full day. Aerospace engineering firm, a.i. solutions, Inc., needed a more powerful computing platform to keep up with the increasingly complex computational needs of its customers: NASA, the Department of Defense and other government agencies planning space flights. To meet that need, it adopted technical computing. Now, a.i. solutions can produce detailed predictions and analysis of the flight dynamics of a given spacecraft, from optimal launch times and orbit determination to attitude control and navigation, up to eight times faster. This enables them to avoid mistakes in any areas that can cause a space mission to fail and potentially result in the loss of life and millions of dollars. Western & Southern Financial Group faced the challenge of running ever larger and more complex actuarial models as its number of policyholders and products grew and regulatory requirements changed. The company chose an actuarial solution that runs on technical computing technology. The solution is easy for the company's IT staff to manage and adjust to meet business needs. The new solution helps the company reduce modeling time by up to 99 percent - letting the team fine-tune its models for more accurate product pricing and financial projections. Our Technical Computing direction Collaborating closely with partners across industry and academia, we must now extend the reach of technical computing even further to help predictive modelers and data explorers make faster, more accurate predictions. As we build the Technical Computing initiative, we will invest in three core areas: Technical computing to the cloud: Microsoft will play a leading role in bringing technical computing power to scientists, engineers and analysts through the cloud. Existing high- performance computing users will benefit from the ability to augment their on-premises systems with cloud resources that enable 'just-in-time' processing. This platform will help ensure processing resources are available whenever they are needed-reliably, consistently and quickly. Simplify parallel development: Today, computers are shipping with more processing power than ever, including multiple cores, but most modern software only uses a small amount of the available processing power. Parallel programs are extremely difficult to write, test and trouble shoot. However, a consistent model for parallel programming can help more developers unlock the tremendous power in today's modern computers and enable a new generation of technical computing. We are delivering new tools to automate and simplify writing software through parallel processing from the desktop... to the cluster... to the cloud. Develop powerful new technical computing tools and applications: We know scientists, engineers and analysts are pushing common tools (i.e., spreadsheets and databases) to the limits with complex, data-intensive models. They need easy access to more computing power and simplified tools to increase the speed of their work. We are building a platform to do this. Our development efforts will yield new, easy-to-use tools and applications that automate data acquisition, modeling, simulation, visualization, workflow and collaboration. This will allow them to spend more time on their work and less time wrestling with complicated technology. Thinking bigger There is so much left to be discovered and so many questions yet to be answered in the fascinating world around us. We believe the technical computing community will show us that we have not seen anything yet. Imagine just some of the breakthroughs this community could make possible: Better predictions to help improve the understanding of pandemics, contagion and global health trends. Climate change models that predict environmental, economic and human impact, accessible in real-time during key discussions and debates. More accurate prediction of natural disasters and their impact to develop more effective emergency response plans. With an ambitious charter in hand, this new team is ready to build on our progress to-date and execute Microsoft's technical computing vision over the months and years ahead. We will steadily invest in the right technologies, tools and talent, and work to bring together the technical computing community. I invite you to visit www.modelingtheworld.com today. We welcome your ideas and feedback. I look forward to making this journey with you and others who want to answer the world's biggest questions, discover solutions to problems that seem impossible and uncover a host of new opportunities to change the world we live in for the better. Bob

    Read the article

  • Where to find Oracle Training for BI & EPM Partners

    - by Mike.Hallett(at)Oracle-BI&EPM
    We run both “Live Virtual Training” (web-based classes) as well as “In Class Training” in most countries around Europe, Middle East and Africa. Some of these are subsidised for OPN partners, while others are available at a discount (usually 25%) to OPN partners via OU (Oracle University).  To see what is scheduled for in-depth hands-on implementation training for partners see:   Oracle Business Intelligence Enterprise Edition Plus Implementation Boot Camp For example, these are some of the OBI11g Boot-camps we currently have scheduled: 11 - 15 June 2012 Bucharest, Romania 21 - 23 August 2012 Johannesburg, South Africa 24 - 28 September 2012 Utrecht, Netherlands Oracle Essbase Implementation Boot Camp Oracle GoldenGate Implementation Boot Camp Hyperion Planning Boot Camp   Hyperion Financial Management Boot Camp   Oracle Business Intelligence Applications for ERP Boot Camp     You can also selectively filter search for courses via the Partner Events Calendar @ http://events.oracle.com/search/search?group=Events&keyword=OPN+Only   Otherwise, it is worth checking the Oracle Partner Enablement BLOG for any BI / EPM news, especially the sub-Blogs on the right for each country.   There is also a monthly Partner Enablement Update (PDF) to find out the latest partner training on Oracle's new products and new releases.

    Read the article

  • How do I re-enable the backlight?

    - by Scott Severance
    Since Oneiric, if I leave my machine (HP Mini 110 netbook) unattended and it goes into power-save mode, the backlight gets disabled. How can I turn it back on? Note that the keyboard backlight controls (Fn+F4 and Fn+F3) don't have any effect in this situation. I've already filed a bug, but filing a bug doesn't fix my problem. I tried this workaround posted in this bug report dealing with Acer laptops: sudo setpci -s 00:02.0 F4.B=0 However, if anything, that command makes things worse. In the general case, I can see a little bit if I'm in a dark room with a flashlight aimed just so. But after running setpci I can't see anything. And I find the setpci documentation to be utterly incomprehensible, so I don't know whether I need to tweak my command somehow or whether I'm completely barking up the wrong tree. Update: I've found a workaround: I'm now booting with the kernel parameter acpi=off. This disables power management, which prevents the machine from going into power saving mode and thus failing to come back up correctly. Of course, not having power management means that I can't use suspend or do anything to manage power other than powering it off (even then, I have to manually use the power switch). Also, it prevents me from using Unity 3D or Gnome Shell, forcing me into Unity 2C or Gnome Classic. So, I'd really like to be able to stop using this hack.

    Read the article

  • What does the crash mean? And why is my Ubuntu Blackbox is crashing how can i check deeply?

    - by YumYumYum
    My system was running for a while amount of 6 hour. Two times i loss remote access and it was not functioning anymore IP is gone etc etc. 3 time showing crash but i have no idea what and why. How to know what went wrong? $ last sun pts/0 d51a429c9.access Mon Mar 19 13:44 still logged in sun tty7 :0 Mon Mar 19 12:17 still logged in reboot system boot 2.6.38-8-generic Mon Mar 19 12:17 - 13:49 (01:31) sun pts/0 d51a429c9.access Mon Mar 19 10:05 - crash (02:12) sun tty7 :0 Mon Mar 19 10:00 - crash (02:16) reboot system boot 2.6.38-8-generic Mon Mar 19 10:00 - 13:49 (03:48) sun pts/0 d51a429c9.access Mon Mar 19 09:24 - down (00:35) sun tty7 :0 Mon Mar 19 09:20 - down (00:39) reboot system boot 2.6.38-8-generic Mon Mar 19 09:20 - 10:00 (00:39) sun pts/2 d51a429c9.access Sun Mar 18 18:04 - down (01:14) sun pts/1 d51a429c9.access Sun Mar 18 17:43 - down (01:35) sun pts/0 d51a429c9.access Sun Mar 18 15:07 - 18:47 (03:40) sun pts/1 d51a429c9.access Sun Mar 18 12:58 - 17:42 (04:43) sun pts/0 d51a429c9.access Sun Mar 18 10:21 - 15:06 (04:44) sun tty7 :0 Sun Mar 18 08:56 - down (10:22) reboot system boot 2.6.38-8-generic Sun Mar 18 08:56 - 19:19 (10:22) sun tty7 :0 Sat Mar 17 18:03 - down (14:51) reboot system boot 2.6.38-8-generic Sat Mar 17 18:03 - 08:55 (14:51) sun tty7 :0 Sat Mar 17 15:00 - down (01:38) reboot system boot 2.6.38-8-generic Sat Mar 17 15:00 - 16:39 (01:38) sun pts/0 d51a4297d.access Sat Mar 17 10:45 - 14:32 (03:46) sun tty7 :0 Fri Mar 16 18:46 - crash (20:14) reboot system boot 2.6.38-8-generic Fri Mar 16 18:46 - 16:39 (21:53) $ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +27.8°C (crit = +100.0°C) temp2: +29.8°C (crit = +100.0°C)

    Read the article

  • how to solve this problem

    - by Surbir
    root@me-desktop:~# sudo apt-get install aircrack-ng Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: aircrack-ng 0 upgraded, 1 newly installed, 0 to remove and 446 not upgraded. 1 not fully installed or removed. Need to get 1,579kB of archives. After this operation, 2,843kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu/ maverick/universe aircrack-ng i386 1:1.1-1 [1,579kB] Fetched 1,579kB in 1min 9s (22.7kB/s) Selecting previously deselected package aircrack-ng. (Reading database ... 520739 files and directories currently installed.) Unpacking aircrack-ng (from .../aircrack-ng_1%3a1.1-1_i386.deb) ... Processing triggers for man-db ... Setting up linux-image-3.0.1-030001-generic (3.0.1-030001.201108060905) ... Running depmod. update-initramfs: Generating /boot/initrd.img-3.0.1-030001-generic Warning: No support for locale: en_US.utf8 Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.0.1-030001-generic /boot/vmlinuz-3.0.1-030001-generic run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.0.1-030001-generic /boot/vmlinuz-3.0.1-030001-generic run-parts: executing /etc/kernel/postinst.d/nvidia-common 3.0.1-030001-generic /boot/vmlinuz-3.0.1-030001-generic run-parts: executing /etc/kernel/postinst.d/pm-utils 3.0.1-030001-generic /boot/vmlinuz-3.0.1-030001-generic run-parts: executing /etc/kernel/postinst.d/update-notifier 3.0.1-030001-generic /boot/vmlinuz-3.0.1-030001-generic run-parts: executing /etc/kernel/postinst.d/zz-update-grub 3.0.1-030001-generic /boot/vmlinuz-3.0.1-030001-generic exec: 15: update-grub: not found run-parts: /etc/kernel/postinst.d/zz-update-grub exited with return code 2 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.0.1-030001-generic.postinst line 1010. dpkg: error processing linux-image-3.0.1-030001-generic (--configure): subprocess installed post-installation script returned error exit status 2 Setting up aircrack-ng (1:1.1-1) ... Errors were encountered while processing: linux-image-3.0.1-030001-generic E: Sub-process /usr/bin/dpkg returned an error code (1) root@me-desktop:~#

    Read the article

  • How small (spec wise) can a virtual machine be and still boot up and run some sort of OS?

    - by IllvilJa
    One of the advantages with virtual machines is that you can be very flexible with their sizes. If the host system permits it, you can have a very large virtual machine with a lot of virtual RAM and disk. Also, you can decide to go the other way around, to give the virtual machine a very modest amount of RAM and disk and then choose and configure the OS appropriately. The question is, how small virtual machines have people managed to setup (and get to both boot up and to run)? Virtual machines doing something usuful is preferable, even if I know "useful" in this context is awfully subjective, but laboratory-cases with a configuration stripped beyond common sense could be intresting as well, just to see what people manage to boot and run. Quite open ended question and quite academic, but think of it: an extremely small VM (which still does something useful) takes very little memory and disk and can be quite quickly saved to and restored from disk. If it's also gentle on CPU resources, one might consider having a huge number of such VMs up and running on a host. (Imagine a VM running just an old Commodore 64 or Commodore Amiga in it. Ok, way wrong CPU architecture for modern Virtualization software running on a x86-based PC but still an interesting thought. You could have quite a few such small VMs running on a modern PC.)

    Read the article

  • Dell PowerEdge 1600SC Server won't boot from Fedora 12 DVD because of CD only drive.

    - by studiohack23
    Dell PowerEdge 1600SC Server won't boot from Fedora 12 DVD in the drive because it only supports CDs as I found out after the fact. I'm a complete novice @ servers, so if you need more detail, let me know, and I'll try to provide it. This server is around 4-6 years old. it has "PXE" boot, not sure what that means? This particular server has 3 RAID hard drives. As far as I know, they have all been wiped. I looked up the service tag on Dell, and it has: Compact Disk Drive, 650M, I Internal, Half Height, 48X, BlackHitachi LG Data Storage as its CD drive. Thus, the CD drive does not support DVDs, so installation will have to be via a live CD. However, I'm trying to put Amahi Home Server (http://www.amahi.org/), and Live CD/USB stick installs are not recommended unless one is an expert Linux user. any suggestions as to how to get around this? PROBLEM SOLVED! THANKS for all the help!

    Read the article

  • How do I boot [embedded] linux from sd card?

    - by Brandon Yates
    I am hacking together a quick embedded linux system on a DM816x evm board. Previously I have been using TFTP and NFS to load my kernel and root filesystem to the board. I am now trying to switch over to loading everything from an SD card. I have my card partitioned such that uBoot and my kernel image are in one partition, and my rootFS in another partition. At power-on, Uboot starts correctly and successfully launches the kernel. However, the kernel is unable to mount the root file system. It appears that it doesn't recognize any SD (mmc) cards. It gives this error message. VFS: Cannot open root device "mmcblk0p2" or unknown-block(2,0) Please append a correct "root=" boot option; here are the available partitions: 1f00 256 mtdblock0 (driver?) 1f01 8 mtdblock1 (driver?) 1f02 2560 mtdblock2 (driver?) 1f03 1272 mtdblock3 (driver?) 1f04 2432 mtdblock4 (driver?) 1f05 128 mtdblock5 (driver?) 1f06 4352 mtdblock6 (driver?) 1f07 204928 mtdblock7 (driver?) 1f08 50304 mtdblock8 (driver?) Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0) I feel like I'm missing something fundamental here. Why does it not recognize the root device I am trying to load from? Here is my uBoot boot script that is running: setenv bootargs console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw mem=124M earlyprink vram=50M ti816xfb.vram=0:16M,1:16M,2:6M ip=off noinitrd;mmc init;fatload mmc 1 0x80009000 uImage;bootm 0x80009000

    Read the article

< Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >