Search Results

Search found 4732 results on 190 pages for 'packages'.

Page 176/190 | < Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >

  • Why are my httpd mpm_prefork processes being reaped so quickly?

    - by Dan Pritts
    We've got a system running RHEL6, x64. We are using a local installation of apache 2.2.22 from source. we serve primarily: mod_perl applications (with a local installation of perl 5.16.0) tomcat applications proxied with mod_jk Here is some context; the main question is below. All of this talks to an Oracle backend. We are having issues with Oracle becoming unresponsive. We think this is because we're hitting the maximum process limit in oracle. We've upped the process limit, but now we are hitting memory pressure on the oracle server. We have tons of oracle sessions sitting idle. I can trace a bunch of them back to the httpd processes. We have mod_perl's Apache::DBI start up a new connection to the database with each httpd child that's spawned. We are concerned that these are not always getting closed out properly when the httpd's exit...and the httpd's are exiting very frequently. I know that it would be good to modify the mod_perl applications to use some better form of db connection pooling; we plan to pursue that but would like to solve our immediate problem sooner. So here's the main question. We are using the prefork MPM. The apache child processes are lasting at most a few minutes. Log analysis shows that each one is serving fewer than 50 clients before exiting; the last request each child serves is OPTIONS * HTTP/1.0 on some sort of internal connection; I'm under the impression that this is a "ping" from the master process. I've adjusted the MPM config as follows. I didn't want to raise MinSpareServers too high, because, after all, i'm trying to minimize the number of sessions to oracle. MinSpareServers 5 MaxSpareServers 30 MaxClients 150 MaxRequestsPerChild 10000 Right now we're serving 250-300 requests per minute. We've got 21 httpd's running, the eldest (other than the master, owned by root) being 3 minutes old. This rate of reaping of the apache children really seems excessive. What could be causing it? Apache was built with: $ ./configure --prefix=/opt/apache --with-ssl=/usr/lib --enable-expires --enable-ext-filter --enable-info --enable-mime-magic --enable-rewrite --enable-so --enable-speling --enable-ssl --enable-usertrack --enable-proxy --enable-headers --enable-log-forensic Apache config info: % /opt/apache/bin/httpd -V Server version: Apache/2.2.22 (Unix) Server built: Jul 23 2012 22:30:13 Server's Module Magic Number: 20051115:30 Server loaded: APR 1.4.5, APR-Util 1.4.1 Compiled using: APR 1.4.5, APR-Util 1.4.1 Architecture: 64-bit Server MPM: Prefork threaded: no forked: yes (variable process count) Server compiled with.... -D APACHE_MPM_DIR="server/mpm/prefork" -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D DYNAMIC_MODULE_LIMIT=128 -D HTTPD_ROOT="/opt/apache" -D SUEXEC_BIN="/opt/apache/bin/suexec" -D DEFAULT_PIDLOG="logs/httpd.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_LOCKFILE="logs/accept.lock" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="conf/mime.types" -D SERVER_CONFIG_FILE="conf/httpd.conf" modules are compiled into apache rather than shared libs: % /opt/apache/bin/httpd -l Compiled in modules: core.c mod_authn_file.c mod_authn_default.c mod_authz_host.c mod_authz_groupfile.c mod_authz_user.c mod_authz_default.c mod_auth_basic.c mod_ext_filter.c mod_include.c mod_filter.c mod_log_config.c mod_log_forensic.c mod_env.c mod_mime_magic.c mod_expires.c mod_headers.c mod_usertrack.c mod_setenvif.c mod_version.c mod_proxy.c mod_proxy_connect.c mod_proxy_ftp.c mod_proxy_http.c mod_proxy_scgi.c mod_proxy_ajp.c mod_proxy_balancer.c mod_ssl.c prefork.c http_core.c mod_mime.c mod_status.c mod_autoindex.c mod_asis.c mod_info.c mod_cgi.c mod_negotiation.c mod_dir.c mod_actions.c mod_speling.c mod_userdir.c mod_alias.c mod_rewrite.c mod_so.c One final note - the red hat httpd, apr, and perl packages are all installed, but ldd shows that none of those libraries are linked with the running httpd.

    Read the article

  • Installing chrome in Centos 6.2 (Final)

    - by usjes
    I need to install chrome in a dedicated centos server where I only access via ssh, it doesn't have X or any windows graphical stuff. I need it to be able to pack extensions using google-chrome --pack-extension. I tried adding this to /etc/yum.repos.d/google.repo [google-chrome] name=google-chrome - 32-bit baseurl=http://dl.google.com/linux/chrome/rpm/stable/i386 enabled=1 gpgcheck=1 gpgkey=https://dl-ssl.google.com/linux/linux_signing_key.pub And then yum install google-chrome-stable, but there's a huge list of dependencies problems: How can I install chrome without breaking anything else? UPDATE: Ok, I installed perl-CGI from .rpm because yum couldn't find it, now dependencies resolve and it show me this list of packages to install: Dependencies Resolved ============================================================================================================================================================================================================================================= Package Arch Version Repository Size ============================================================================================================================================================================================================================================= Installing: google-chrome-stable x86_64 19.0.1084.52-138391 google-chrome 35 M Installing for dependencies: ConsoleKit x86_64 0.4.1-3.el6 base 82 k ConsoleKit-libs x86_64 0.4.1-3.el6 base 17 k GConf2 x86_64 2.28.0-6.el6 base 964 k ORBit2 x86_64 2.14.17-3.1.el6 base 168 k bc x86_64 1.06.95-1.el6 base 110 k cdparanoia-libs x86_64 10.2-5.1.el6 base 47 k cups x86_64 1:1.4.2-44.el6_2.3 updates 2.3 M dbus x86_64 1:1.2.24-5.el6_1 base 207 k desktop-file-utils x86_64 0.15-9.el6 base 47 k ed x86_64 1.1-3.3.el6 base 72 k eggdbus x86_64 0.6-3.el6 base 91 k foomatic x86_64 4.0.4-1.el6_1.1 base 251 k foomatic-db noarch 4.0-7.20091126.el6 base 980 k foomatic-db-filesystem noarch 4.0-7.20091126.el6 base 4.4 k foomatic-db-ppds noarch 4.0-7.20091126.el6 base 19 M ghostscript x86_64 8.70-11.el6_2.6 updates 4.4 M ghostscript-fonts noarch 5.50-23.1.el6 base 751 k gstreamer x86_64 0.10.29-1.el6 base 764 k gstreamer-plugins-base x86_64 0.10.29-1.el6 base 942 k gstreamer-tools x86_64 0.10.29-1.el6 base 23 k iso-codes noarch 3.16-2.el6 base 2.4 M lcms-libs x86_64 1.19-1.el6 base 100 k libIDL x86_64 0.8.13-2.1.el6 base 83 k libXScrnSaver x86_64 1.2.0-1.el6 base 19 k libXfont x86_64 1.4.1-2.el6_1 base 128 k libXv x86_64 1.0.5-1.el6 base 21 k libfontenc x86_64 1.0.5-2.el6 base 24 k libgudev1 x86_64 147-2.40.el6 base 59 k libmng x86_64 1.0.10-4.1.el6 base 165 k libogg x86_64 2:1.1.4-2.1.el6 base 21 k liboil x86_64 0.3.16-4.1.el6 base 121 k libtheora x86_64 1:1.1.0-2.el6 base 129 k libvisual x86_64 0.4.0-9.1.el6 base 135 k libvorbis x86_64 1:1.2.3-4.el6_2.1 updates 168 k mailx x86_64 12.4-6.el6 base 234 k man x86_64 1.6f-29.el6 base 263 k mesa-libGLU x86_64 7.11-3.el6 base 201 k nvidia-graphics195.30-libs x86_64 195.30-120.el6 atrpms 13 M openjpeg-libs x86_64 1.3-7.el6 base 59 k pax x86_64 3.4-10.1.el6 base 69 k phonon-backend-gstreamer x86_64 1:4.6.2-20.el6 base 125 k polkit x86_64 0.96-2.el6_0.1 base 158 k poppler x86_64 0.12.4-3.el6_0.1 base 557 k poppler-data noarch 0.4.0-1.el6 base 2.2 M poppler-utils x86_64 0.12.4-3.el6_0.1 base 73 k portreserve x86_64 0.0.4-4.el6_1.1 base 22 k qt x86_64 1:4.6.2-20.el6 base 4.0 M qt-sqlite x86_64 1:4.6.2-20.el6 base 50 k qt-x11 x86_64 1:4.6.2-20.el6 base 12 M qt3 x86_64 3.3.8b-30.el6 base 3.5 M redhat-lsb x86_64 4.0-3.el6.centos base 24 k redhat-lsb-graphics x86_64 4.0-3.el6.centos base 12 k redhat-lsb-printing x86_64 4.0-3.el6.centos base 11 k sgml-common noarch 0.6.3-32.el6 base 43 k time x86_64 1.7-37.1.el6 base 26 k tmpwatch x86_64 2.9.16-4.el6 base 31 k xdg-utils noarch 1.0.2-17.20091016cvs.el6 base 58 k xml-common noarch 0.6.3-32.el6 base 9.5 k xorg-x11-font-utils x86_64 1:7.2-11.el6 base 75 k xz x86_64 4.999.9-0.3.beta.20091007git.el6 base 137 k xz-lzma-compat x86_64 4.999.9-0.3.beta.20091007git.el6 base 16 k Transaction Summary ============================================================================================================================================================================================================================================= Install 62 Package(s) Is it safe to continue and install all that or could I break something already installed?

    Read the article

  • /usr/bin/sshd isn't linked against PAM on one of my systems. What is wrong and how can I fix it?

    - by marc.riera
    Hi, I'm using AD as my user account server with ldap. Most of the servers run with UsePam yes except this one, it has lack of pam support on sshd. root@linserv9:~# ldd /usr/sbin/sshd linux-vdso.so.1 => (0x00007fff621fe000) libutil.so.1 => /lib/libutil.so.1 (0x00007fd759d0b000) libz.so.1 => /usr/lib/libz.so.1 (0x00007fd759af4000) libnsl.so.1 => /lib/libnsl.so.1 (0x00007fd7598db000) libcrypto.so.0.9.8 => /usr/lib/libcrypto.so.0.9.8 (0x00007fd75955b000) libcrypt.so.1 => /lib/libcrypt.so.1 (0x00007fd759323000) libc.so.6 => /lib/libc.so.6 (0x00007fd758fc1000) libdl.so.2 => /lib/libdl.so.2 (0x00007fd758dbd000) /lib64/ld-linux-x86-64.so.2 (0x00007fd759f0e000) I have this packages installed root@linserv9:~# dpkg -l|grep -E 'pam|ssh' ii denyhosts 2.6-2.1 an utility to help sys admins thwart ssh hac ii libpam-modules 0.99.7.1-5ubuntu6.1 Pluggable Authentication Modules for PAM ii libpam-runtime 0.99.7.1-5ubuntu6.1 Runtime support for the PAM library ii libpam-ssh 1.91.0-9.2 enable SSO behavior for ssh and pam ii libpam0g 0.99.7.1-5ubuntu6.1 Pluggable Authentication Modules library ii libpam0g-dev 0.99.7.1-5ubuntu6.1 Development files for PAM ii openssh-blacklist 0.1-1ubuntu0.8.04.1 list of blacklisted OpenSSH RSA and DSA keys ii openssh-client 1:4.7p1-8ubuntu1.2 secure shell client, an rlogin/rsh/rcp repla ii openssh-server 1:4.7p1-8ubuntu1.2 secure shell server, an rshd replacement ii quest-openssh 5.2p1_q13-1 Secure shell root@linserv9:~# What I'm doing wrong? thanks. Edit: root@linserv9:~# cat /etc/pam.d/sshd # PAM configuration for the Secure Shell service # Read environment variables from /etc/environment and # /etc/security/pam_env.conf. auth required pam_env.so # [1] # In Debian 4.0 (etch), locale-related environment variables were moved to # /etc/default/locale, so read that as well. auth required pam_env.so envfile=/etc/default/locale # Standard Un*x authentication. @include common-auth # Disallow non-root logins when /etc/nologin exists. account required pam_nologin.so # Uncomment and edit /etc/security/access.conf if you need to set complex # access limits that are hard to express in sshd_config. # account required pam_access.so # Standard Un*x authorization. @include common-account # Standard Un*x session setup and teardown. @include common-session # Print the message of the day upon successful login. session optional pam_motd.so # [1] # Print the status of the user's mailbox upon successful login. session optional pam_mail.so standard noenv # [1] # Set up user limits from /etc/security/limits.conf. session required pam_limits.so # Set up SELinux capabilities (need modified pam) # session required pam_selinux.so multiple # Standard Un*x password updating. @include common-password Edit2: UsePAM yes fails With this configuration ssh fails to start : root@linserv9:/home/admmarc# cat /etc/ssh/sshd_config |grep -vE "^[ \t]*$|^#" Port 22 Protocol 2 ListenAddress 0.0.0.0 RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys ChallengeResponseAuthentication yes UsePAM yes Subsystem sftp /usr/lib/sftp-server root@linserv9:/home/admmarc# The error it gives is as follows root@linserv9:/home/admmarc# /etc/init.d/ssh start * Starting OpenBSD Secure Shell server sshd /etc/ssh/sshd_config: line 75: Bad configuration option: UsePAM /etc/ssh/sshd_config: terminating, 1 bad configuration options ...fail! root@linserv9:/home/admmarc#

    Read the article

  • NPM not installing dependencies?

    - by neezer
    Having trouble getting NPM to install dependencies with npm install -d in my project directory with a defined package.json file. Here's my package.json: https://gist.github.com/3068312 And after wiping my project root's node modules folder (rm -rf node_modules), I run npm install -d in my project root and am greeted with this: (ssh) /vagrant git:master ? npm install -d npm info it worked if it ends with ok npm info using [email protected] npm info using [email protected] npm info preinstall [email protected] npm http GET https://registry.npmjs.org/sinon npm http GET https://registry.npmjs.org/underscore npm http GET https://registry.npmjs.org/mocha npm http GET https://registry.npmjs.org/request npm http 304 https://registry.npmjs.org/sinon npm http 304 https://registry.npmjs.org/underscore npm http 304 https://registry.npmjs.org/mocha npm http 304 https://registry.npmjs.org/request npm info into /vagrant [email protected] npm info into /vagrant [email protected] npm info into /vagrant [email protected] npm info into /vagrant [email protected] npm info installOne [email protected] npm info installOne [email protected] npm info installOne [email protected] npm info installOne [email protected] npm info unbuild /vagrant/node_modules/underscore npm info unbuild /vagrant/node_modules/mocha npm info unbuild /vagrant/node_modules/sinon npm info unbuild /vagrant/node_modules/request npm ERR! error installing [email protected] npm info unbuild /vagrant/node_modules/underscore npm ERR! error rolling back [email protected] Error: UNKNOWN, unknown error '/vagrant/node_modules/underscore' npm ERR! Error: ENOENT, no such file or directory '/vagrant/node_modules/underscore/package.json' npm ERR! You may report this log at: npm ERR! <http://bugs.debian.org/npm> npm ERR! or use npm ERR! reportbug --attach /vagrant/npm-debug.log npm npm ERR! npm ERR! System Linux 3.2.0-23-generic npm ERR! command "node" "/usr/bin/npm" "install" "-d" npm ERR! cwd /vagrant npm ERR! node -v v0.6.12 npm ERR! npm -v 1.1.4 npm ERR! path /vagrant/node_modules/underscore/package.json npm ERR! code ENOENT npm ERR! message ENOENT, no such file or directory '/vagrant/node_modules/underscore/package.json' npm ERR! errno {} npm ERR! error installing [email protected] npm info unbuild /vagrant/node_modules/request npm ERR! error rolling back [email protected] Error: UNKNOWN, unknown error '/vagrant/node_modules/request' npm ERR! npm ERR! Additional logging details can be found in: npm ERR! /vagrant/npm-debug.log npm not ok If I rerun npm install -d, the error changes to whatever the next package is... if I keep running it it over and over again, it eventually doesn't complain anymore and outputs: (ssh) /vagrant git:master ? npm install -d npm info it worked if it ends with ok npm info using [email protected] npm info using [email protected] npm info preinstall [email protected] npm info build /vagrant npm info linkStuff [email protected] npm info install [email protected] npm info postinstall [email protected] npm info ok However, none of the dependencies for any of these packages get installed. For instance, cheerio has a few dependencies, so when I try running my test suite, I'm greeted with: (ssh) /vagrant git:master ? mocha --compilers coffee:coffee-script --watch spec/* node.js:201 throw e; // process.nextTick error, or 'error' event on first tick ^ Error: Cannot find module 'cheerio-select' at Function._resolveFilename (module.js:332:11) at Function._load (module.js:279:25) at Module.require (module.js:354:17) What gives? I'm on Ubuntu Precise64 in a Vagrant virtual box.

    Read the article

  • Debian dependency problems / partially installed

    - by Michael
    I tried to install curl support for php 5 on my debian squeeze machine and since I'm having problems. After trying to install curl I got dependency issues which I tried to solve by removing what started the issues. From one thing came another and I'm currently looking at ~29 issues when I try to do an apt-get upgrade. These issues vary from unable to config, dependency and unable to remove errors. I tried apt-get upgrade -f and installing packages using dpkg command. I tried removing using purge and force. I manually removed stuff to try and fix it. I tried running dpkg --configure -a. I've to say I'm still pretty new to linux so I'm out of idea's and cant seem to find an answer online that matches my problems. Here's a part of the apt-get upgrade command output: Reading package lists... Building dependency tree... Reading state information... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 29 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up libgeoip1 (1.4.7~beta6+dfsg-1) ... Bus error dpkg: error processing libgeoip1 (--configure): subprocess installed post-installation script returned error exit status 135 Setting up libisc62 (1:9.7.3.dfsg-1~squeeze3) ... Bus error dpkg: error processing libisc62 (--configure): subprocess installed post-installation script returned error exit status 135 dpkg: dependency problems prevent configuration of libdns69: libdns69 depends on libgeoip1 (>= 1.4.7~beta6+dfsg); however: Package libgeoip1 is not configured yet. libdns69 depends on libisc62; however: Package libisc62 is not configured yet. dpkg: error processing libdns69 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libisccc60: libisccc60 depends on libisc62; however: Package libisc62 is not configured yet. dpkg: error processing libisccc60 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libisccfg62: libisccfg62 depends on libdns69; however: Package libdns69 is not configured yet. .. continues Errors were encountered while processing: libgeoip1 libisc62 libdns69 libisccc60 libisccfg62 libbind9-60 liblwres60 bind9-host libavahi-core7 libdaemon0 avahi-daemon libexif12 libffi5 libgomp1 libgphoto2-port0 libgphoto2-2 libperl5.10 libsensors4 libsnmp15 libhpmud0 libieee1284-3 libnss-mdns libossp-uuid16 libpq5 libv4l-0 libsane libsane-hpaio libssh2-1 python-gobject dpkg --configure -a Setting up libpq5 (8.4.8-0squeeze2) ... Bus error dpkg: error processing libpq5 (--configure): subprocess installed post-installation script returned error exit status 135 Setting up libperl5.10 (5.10.1-17squeeze2) ... Bus error dpkg: error processing libperl5.10 (--configure): subprocess installed post-installation script returned error exit status 135 Setting up libffi5 (3.0.9-3) ... Bus error dpkg: error processing libffi5 (--configure): subprocess installed post-installation script returned error exit status 135 Setting up libexif12 (0.6.19-1) ... .. continues Suggestions are really welcome I really don't know what to do. Michael.

    Read the article

  • Pairing Bluetooth device with PIN fails

    - by Pikaro
    I'm trying to pair my old BlackBerry 8310 to my Linux desktop (up-to-date Debian Sid, 3.15-10.dmz.1-liquorix-amd64) by using blueman and its associated tools. Scanning for the device works equally well for both sides; however, I am unable to pair the two once it comes to entering the PIN. If I scan from my PC, I have two options in blueman-manager regarding my phone: Directly selecting "pair", or selecting "setup". If I select "pair", nothing happens on my desktop, but the phone asks me to enter a PIN; if I do so, it reports that pairing has failed. During that, nothing is logged to the console. Selecting "setup" opens a configuration dialog that allows for entering or generating a PIN. Regardless, I get to a screen that tells me to enter the PIN on the phone, and at the same time, the phone pops up the equivalent dialog. This would be what one would expect to work; but whatever I enter (naturally, the same on both), both devices report that pairing has failed, and blueman-manager logs init_services (/usr/lib/python2.7/dist-packages/blueman/main/Device.py:73) Loading services org.bluez.Error.AuthenticationFailed: Authentication Failed If I instead try to pair from the phone, I cannot see any kind of reaction from my desktop - all I get is the equivalent "pairing failed" message from the BlackBerry after I entered a PIN in the dialog that pops up there. hcitool scan and hciconfig -a work without complaints, but I cannot find a way to try the pairing as a whole on the console since bluez-simple-agent seems to have been discontinued and this recommendation is everywhere on Google. hcitool cc as root opens the PIN dialog on the phone, then fails with "Input/Output error" once I enter it. The user is not permitted to execute this command. I also tried creating /usr/lib/bluetooth/<MAC>/pincodes to manually define a persistent PIN, which seems to have had no effect. The same goes for running the different commands as root, though I'm really confused about the internal structure of the Bluetooth subsystem now: They usually and inconsistently failed with Python or DBUS errors or just showed the same results. The only other Bluetooth device I have around are a pair of Creative speakers. Trying "setup" asks me to enter a key on them, which is impossible. If I try "pair", I'm asked for a PIN as I should, but no pairing takes place, and no errors appear on the console. (It just repeats their name a few times.) Interestingly, I tried that before writing my question, and nothing happened in terms of PIN questions, just like with the BlackBerry, which still shows no change. I don't think I actively changed anything since then. The BlackBerry can pair with and connect to the speakers, and everything goes as one would expect, so the problem is definitely with my desktop. So thus my questions: What is that PIN window generated by, and why does it seem to appear randomly? How can I find out what, exactly, fails after trying to add the speakers, as this may give me a clue? Is there any kind of complete log that concerns itself with Bluetooth? What data can I provide to make this more solvable?

    Read the article

  • 'NoneType' object has no attribute 'get' error using SQLAlchemy

    - by Az
    I've been trying to map an object to a database using SQLAlchemy but have run into a snag. Version info if handy: [OS: Mac OSX 10.5.8 | Python: 2.6.4 | SQLAlchemy: 0.5.8] The class I'm going to map: class Student(object): def __init__(self, name, id): self.id = id self.name = name self.preferences = collections.defaultdict(set) self.allocated_project = None self.allocated_rank = 0 def __repr__(self): return str(self) def __str__(self): return "%s %s" %(self.id, self.name) Background: Now, I've got a function that reads in the necessary information from a text database into these objects. The function more or less works and I can easily access the information from the objects. Before the SQLAlchemy code runs, the function will read in the necessary info and store it into the Class. There is a dictionary called students which stores this as such: students = {} students[id] = Student(<all the info from the various "reader" functions>) Afterwards, there is an "allocation" algorithm that will allocate projects to student. It does that well enough. The allocated_project remains as None if a student is unsuccessful in getting a project. SQLAlchemy bit: So after all this happens, I'd like to map my object to a database table. Using the documentation, I've used the following code to only map certain bits. I also begin to create a Session. from sqlalchemy import * from sqlalchemy.orm import * engine = create_engine('sqlite:///:memory:', echo=False) metadata = MetaData() students_table = Table('studs', metadata, Column('id', Integer, primary_key=True), Column('name', String) ) metadata.create_all(engine) mapper(Student, students_table) Session = sessionmaker(bind=engine) sesh = Session() Now after that, I was curious to see if I could print out all the students from my students dictionary. for student in students.itervalues(): print student What do I get but an error: Traceback (most recent call last): File "~/FYP_Tests/FYP_Tests.py", line 140, in <module> print student File "/~FYP_Tests/Parties.py", line 30, in __str__ return "%s %s" %(self.id, self.name) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/SQLAlchemy-0.5.8-py2.6.egg/sqlalchemy/orm/attributes.py", line 158, in __get__ return self.impl.get(instance_state(instance), instance_dict(instance)) AttributeError: 'NoneType' object has no attribute 'get' I'm at a loss as to how to resolve this issue, if it is an issue. If more information is required, please ask and I will provide it.

    Read the article

  • jQuery load Google Visualization API with AJAX

    - by Curro
    Hello. There is an issue that I cannot solve, I've been looking a lot in the internet but found nothing. I have this JavaScript that is used to do an Ajax request by PHP. When the request is done, it calls a function that uses the Google Visualization API to draw an annotatedtimeline to present the data. The script works great without AJAX, if I do everything inline it works great, but when I try to do it with AJAX it doesn't work!!! The error that I get is in the declaration of the "data" DataTable, in the Google Chrome Developer Tools I get a Uncaught TypeError: Cannot read property 'DataTable' of undefined. When the script gets to the error, everything on the page is cleared, it just shows a blank page. So I don't know how to make it work. Please help Thanks in advance $(document).ready(function(){ // Get TIER1Tickets $("#divTendency").addClass("loading"); $.ajax({ type: "POST", url: "getTIER1Tickets.php", data: "", success: function(html){ // Succesful, load visualization API and send data google.load('visualization', '1', {'packages': ['annotatedtimeline']}); google.setOnLoadCallback(drawData(html)); } }); }); function drawData(response){ $("#divTendency").removeClass("loading"); // Data comes from PHP like: <CSV ticket count for each day>*<CSV dates for ticket counts>*<total number of days counted> // So it has to be split first by * then by , var dataArray = response.split("*"); var dataTickets = dataArray[0]; var dataDates = dataArray[1]; var dataCount = dataArray[2]; // The comma separation now splits the ticket counts and the dates var dataTicketArray = dataTickets.split(","); var dataDatesArray = dataDates.split(","); // Visualization data var data = new google.visualization.DataTable(); data.addColumn('date', 'Date'); data.addColumn('number', 'Tickets'); data.addRows(dataCount); var dateSplit = new Array(); for(var i = 0 ; i < dataCount ; i++){ // Separating the data because must be entered as "new Date(YYYY,M,D)" dateSplit = dataDatesArray[i].split("-"); data.setValue(i, 0, new Date(dateSplit[2],dateSplit[1],dateSplit[0])); data.setValue(i, 1, parseInt(dataTicketArray[i])); } var annotatedtimeline = new google.visualization.AnnotatedTimeLine(document.getElementById('divTendency')); annotatedtimeline.draw(data, {displayAnnotations: true}); }

    Read the article

  • Python performance: iteration and operations on nested lists

    - by J.J.
    Problem Hey folks. I'm looking for some advice on python performance. Some background on my problem: Given: A mesh of nodes of size (x,y) each with a value (0...255) starting at 0 A list of N input coordinates each at a specified location within the range (0...x, 0...y) Increment the value of the node at the input coordinate and the node's neighbors within range Z up to a maximum of 255. Neighbors beyond the mesh edge are ignored. (No wrapping) BASE CASE: A mesh of size 1024x1024 nodes, with 400 input coordinates and a range Z of 75 nodes. Processing should be O(x*y*Z*N). I expect x, y and Z to remain roughly around the values in the base case, but the number of input coordinates N could increase up to 100,000. My goal is to minimize processing time. Current results I have 2 current implementations: f1, f2 Running speed on my 2.26 GHz Intel Core 2 Duo with Python 2.6.1: f1: 2.9s f2: 1.8s f1 is the initial naive implementation: three nested for loops. f2 is replaces the inner for loop with a list comprehension. Code is included below for your perusal. Question How can I further reduce the processing time? I'd prefer sub-1.0s for the test parameters. Please, keep the recommendations to native Python. I know I can move to a third-party package such as numpy, but I'm trying to avoid any third party packages. Also, I've generated random input coordinates, and simplified the definition of the node value updates to keep our discussion simple. The specifics have to change slightly and are outside the scope of my question. thanks much! f1 is the initial naive implementation: three nested for loops. 2.9s def f1(x,y,n,z): rows = [] for i in range(x): rows.append([0 for i in xrange(y)]) for i in range(n): inputX, inputY = (int(x*random.random()), int(y*random.random())) topleft = (inputX - z, inputY - z) for i in xrange(max(0, topleft[0]), min(topleft[0]+(z*2), x)): for j in xrange(max(0, topleft[1]), min(topleft[1]+(z*2), y)): if rows[i][j] <= 255: rows[i][j] += 1 f2 is replaces the inner for loop with a list comprehension. 1.8s def f2(x,y,n,z): rows = [] for i in range(x): rows.append([0 for i in xrange(y)]) for i in range(n): inputX, inputY = (int(x*random.random()), int(y*random.random())) topleft = (inputX - z, inputY - z) for i in xrange(max(0, topleft[0]), min(topleft[0]+(z*2), x)): l = max(0, topleft[1]) r = min(topleft[1]+(z*2), y) rows[i][l:r] = [j+1 for j in rows[i][l:r] if j < 255]

    Read the article

  • Deletes not cascading for self-referencing entities

    - by jwaddell
    I have the following (simplified) Hibernate entities: @Entity @Table(name = "package") public class Package { protected Content content; @OneToOne(cascade = {javax.persistence.CascadeType.ALL}) @JoinColumn(name = "content_id") @Fetch(value = FetchMode.JOIN) public Content getContent() { return content; } public void setContent(Content content) { this.content = content; } } @Entity @Table(name = "content") public class Content { private Set<Content> subContents = new HashSet<Content>(); private ArchivalInformationPackage parentPackage; @OneToMany(fetch = FetchType.EAGER) @JoinTable(name = "subcontents", joinColumns = {@JoinColumn(name = "content_id")}, inverseJoinColumns = {@JoinColumn(name = "elt")}) @Cascade(value = {org.hibernate.annotations.CascadeType.DELETE, org.hibernate.annotations.CascadeType.REPLICATE}) @Fetch(value = FetchMode.SUBSELECT) public Set<Content> getSubContents() { return subContents; } public void setSubContents(Set<Content> subContents) { this.subContents = subContents; } @ManyToOne(cascade = {CascadeType.ALL}) @JoinColumn(name = "parent_package_id") public Package getParentPackage() { return parentPackage; } public void setParentPackage(Package parentPackage) { this.parentPackage = parentPackage; } } So there is one Package, which has one "top" Content. The top Content links back to the Package, with cascade set to ALL. The top Content may have many "sub" Contents, and each sub-Content may have many sub-Contents of its own. Each sub-Content has a parent Package, which may or may not be the same Package as the top Content (ie a many-to-one relationship for Content to Package). The relationships are required to be ManyToOne (Package to Content) and ManyToMany (Content to sub-Contents) but for the case I am currently testing each sub-Content only relates to one Package or Content. The problem is that when I delete a Package and flush the session, I get a Hibernate error stating that I'm violating a foreign key constraint on table subcontents, with a particular content_id still referenced from table subcontents. I've tried specifically (recursively) deleting the Contents before deleting the Package but I get the same error. Is there a reason why this entity tree is not being deleted properly? EDIT: After reading answers/comments I realised that a Content cannot have multiple Packages, and a sub-Content cannot have multiple parent-Contents, so I have modified the annotations from ManyToOne and ManyToMany to OneToOne and OneToMany. Unfortunately that did not fix the problem. I have also added the bi-directional link from Content back to the parent Package which I left out of the simplified code.

    Read the article

  • Using scipy.interpolate.splrep function

    - by Koustav Ghosal
    I am trying to fit a cubic spline to a given set of points. My points are not ordered. I CANNOT sort or reorder the points, since I need that information. But since the function scipy.interpolate.splrep works only on non-duplicate and monotonically increasing points I have defined a function that maps the x-coordinates to a monotonically increasing space. My old points are: xpoints=[4913.0, 4912.0, 4914.0, 4913.0, 4913.0, 4913.0, 4914.0, 4915.0, 4918.0, 4921.0, 4925.0, 4932.0, 4938.0, 4945.0, 4950.0, 4954.0, 4955.0, 4957.0, 4956.0, 4953.0, 4949.0, 4943.0, 4933.0, 4921.0, 4911.0, 4898.0, 4886.0, 4874.0, 4865.0, 4858.0, 4853.0, 4849.0, 4848.0, 4849.0, 4851.0, 4858.0, 4864.0, 4869.0, 4877.0, 4884.0, 4893.0, 4903.0, 4913.0, 4923.0, 4935.0, 4947.0, 4959.0, 4970.0, 4981.0, 4991.0, 5000.0, 5005.0, 5010.0, 5015.0, 5019.0, 5020.0, 5021.0, 5023.0, 5025.0, 5027.0, 5027.0, 5028.0, 5028.0, 5030.0, 5031.0, 5033.0, 5035.0, 5037.0, 5040.0, 5043.0] ypoints=[10557.0, 10563.0, 10567.0, 10571.0, 10575.0, 10577.0, 10578.0, 10581.0, 10582.0, 10582.0, 10582.0, 10581.0, 10578.0, 10576.0, 10572.0, 10567.0, 10560.0, 10550.0, 10541.0, 10531.0, 10520.0, 10511.0, 10503.0, 10496.0, 10490.0, 10487.0, 10488.0, 10488.0, 10490.0, 10495.0, 10504.0, 10513.0, 10523.0, 10533.0, 10542.0, 10550.0, 10556.0, 10559.0, 10560.0, 10559.0, 10555.0, 10550.0, 10543.0, 10533.0, 10522.0, 10514.0, 10505.0, 10496.0, 10490.0, 10486.0, 10482.0, 10481.0, 10482.0, 10486.0, 10491.0, 10497.0, 10506.0, 10516.0, 10524.0, 10534.0, 10544.0, 10552.0, 10558.0, 10564.0, 10569.0, 10573.0, 10576.0, 10578.0, 10581.0, 10582.0] Plots: The code for the mapping function and interpolation is: xnew=[] ynew=ypoints for c3,i in enumerate(xpoints): if np.isfinite(np.log(i*pow(2,c3))): xnew.append(np.log(i*pow(2,c3))) else: if c==0: xnew.append(np.random.random_sample()) else: xnew.append(xnew[c3-1]+np.random.random_sample()) xnew=np.asarray(xnew) ynew=np.asarray(ynew) constant1=10.0 nknots=len(xnew)/constant1 idx_knots = (np.arange(1,len(xnew)-1,(len(xnew)-2)/np.double(nknots))).astype('int') knots = [xnew[i] for i in idx_knots] knots = np.asarray(knots) int_range=np.linspace(min(xnew),max(xnew),len(xnew)) tck = interpolate.splrep(xnew,ynew,k=3,task=-1,t=knots) y1= interpolate.splev(int_range,tck,der=0) The code is throwing an error at the function interpolate.splrep() for some set of points like the above one. The error is: File "/home/neeraj/Desktop/koustav/res/BOS5/fit_spline3.py", line 58, in save_spline_f tck = interpolate.splrep(xnew,ynew,k=3,task=-1,t=knots) File "/usr/lib/python2.7/dist-packages/scipy/interpolate/fitpack.py", line 465, in splrep raise _iermessier(_iermess[ier][0]) ValueError: Error on input data But for other set of points it works fine. For example for the following set of points. xpoints=[1629.0, 1629.0, 1629.0, 1629.0, 1629.0, 1629.0, 1629.0, 1629.0, 1629.0, 1629.0, 1629.0, 1629.0, 1629.0, 1629.0, 1629.0, 1629.0, 1630.0, 1630.0, 1630.0, 1631.0, 1631.0, 1631.0, 1631.0, 1630.0, 1629.0, 1629.0, 1629.0, 1628.0, 1627.0, 1627.0, 1625.0, 1624.0, 1624.0, 1623.0, 1620.0, 1618.0, 1617.0, 1616.0, 1615.0, 1614.0, 1614.0, 1612.0, 1612.0, 1612.0, 1611.0, 1610.0, 1609.0, 1608.0, 1607.0, 1607.0, 1603.0, 1602.0, 1602.0, 1601.0, 1601.0, 1600.0, 1599.0, 1598.0] ypoints=[10570.0, 10572.0, 10572.0, 10573.0, 10572.0, 10572.0, 10571.0, 10570.0, 10569.0, 10565.0, 10564.0, 10563.0, 10562.0, 10560.0, 10558.0, 10556.0, 10554.0, 10551.0, 10548.0, 10547.0, 10544.0, 10542.0, 10541.0, 10538.0, 10534.0, 10532.0, 10531.0, 10528.0, 10525.0, 10522.0, 10519.0, 10517.0, 10516.0, 10512.0, 10509.0, 10509.0, 10507.0, 10504.0, 10502.0, 10500.0, 10501.0, 10499.0, 10498.0, 10496.0, 10491.0, 10492.0, 10488.0, 10488.0, 10488.0, 10486.0, 10486.0, 10485.0, 10485.0, 10486.0, 10483.0, 10483.0, 10482.0, 10480.0] Plots: Can anybody suggest what's happening ?? Thanks in advance......

    Read the article

  • IronPython and Nodebox in C#

    - by proxylittle
    My plan: I'm trying to setup my C# project to communicate with Nodebox to call a certain function which populates a graph and draws it in a new window. Current situation: [fixed... see Update2] I have already included all python-modules needed, but im still getting a Library 'GL' not found it seems that the pyglet module needs a reference to GL/gl.h, but can't find it due to IronPython behaviour. Requirement: The project needs to stay as small as possible without installing new packages. Thats why i have copied all my modules into the project-folder and would like to keep it that or a similar way. My question: Is there a certain workaround for my problem or a fix for the library-folder missmatch. Have read some articles about Tao-Opengl and OpenTK but can't find a good solution. Update1: Updated my sourcecode with a small pyglet window-rendering example. Problem is in pyglet and referenced c-Objects. How do i include them in my c# project to be called? No idea so far... experimenting alittle now. Keeping you updated. SampleCode C#: ScriptRuntimeSetup setup = Python.CreateRuntimeSetup(null); ScriptRuntime runtime = new ScriptRuntime(setup); ScriptEngine engine = Python.GetEngine(runtime); ScriptSource source = engine.CreateScriptSourceFromFile("test.py"); ScriptScope scope = engine.CreateScope(); source.Execute(scope); SampleCode Python (test.py): from nodebox.graphics import * from nodebox.graphics.physics import Vector, Boid, Flock, Obstacle flock = Flock(50, x=-50, y=-50, width=700, height=400) flock.sight(80) def draw(canvas): canvas.clear() flock.update(separation=0.4, cohesion=0.6, alignment=0.1, teleport=True) for boid in flock: push() translate(boid.x, boid.y) scale(0.5 + boid.depth) rotate(boid.heading) arrow(0, 0, 15) pop() canvas.size = 600, 300 def main(canvas): canvas.run(draw) Update2: Line 139 [pyglet/lib.py] sys.platform is not win32... there was the error. Fixed it by just using the line: from pyglet.gl.lib_wgl import link_GL, link_GLU, link_WGL Now the following Error: 'module' object has no attribute '_getframe' Kind of a pain to fix it. Updating with results... Update3: Fixed by adding following line right after first line in C#-Code: setup.Options["Frames"] = true; Current Problem: No module named unicodedata, but in Python26/DLLs is only a *.pyd file`. So.. how do i implement it now?!

    Read the article

  • Diophantine Equation [closed]

    - by ANIL
    In mathematics, a Diophantine equation (named for Diophantus of Alexandria, a third century Greek mathematician) is a polynomial equation where the variables can only take on integer values. Although you may not realize it, you have seen Diophantine equations before: one of the most famous Diophantine equations is: X^n+Y^n=Z^n We are not certain that McDonald's knows about Diophantine equations (actually we doubt that they do), but they use them! McDonald's sells Chicken McNuggets in packages of 6, 9 or 20 McNuggets. Thus, it is possible, for example, to buy exactly 15 McNuggets (with one package of 6 and a second package of 9), but it is not possible to buy exactly 16 nuggets, since no non- negative integer combination of 6's, 9's and 20's adds up to 16. To determine if it is possible to buy exactly n McNuggets, one has to solve a Diophantine equation: find non-negative integer values of a, b, and c, such that 6a + 9b + 20c = n. Problem 1 Show that it is possible to buy exactly 50, 51, 52, 53, 54, and 55 McNuggets, by finding solutions to the Diophantine equation. You can solve this in your head, using paper and pencil, or writing a program. However you chose to solve this problem, list the combinations of 6, 9 and 20 packs of McNuggets you need to buy in order to get each of the exact amounts. Given that it is possible to buy sets of 50, 51, 52, 53, 54 or 55 McNuggets by combinations of 6, 9 and 20 packs, show that it is possible to buy 56, 57,..., 65 McNuggets. In other words, show how, given solutions for 50-55, one can derive solutions for 56-65. Problem 2 Write an iterative program that finds the largest number of McNuggets that cannot be bought in exact quantity. Your program should print the answer in the following format (where the correct number is provided in place of n): "Largest number of McNuggets that cannot be bought in exact quantity: n" Hints: Hypothesize possible instances of numbers of McNuggets that cannot be purchased exactly, starting with 1 For each possible instance, called n, a. Test if there exists non-negative integers a, b, and c, such that 6a+9b+20c = n. (This can be done by looking at all feasible combinations of a, b, and c) b. If not, n cannot be bought in exact quantity, save n When you have found six consecutive values of n that in fact pass the test of having an exact solution, the last answer that was saved (not the last value of n that had a solution) is the correct answer, since you know by the theorem that any amount larger can also be bought in exact quantity

    Read the article

  • Global Entity Framework Context in WPF Application

    - by OffApps Cory
    Good day, I am in the middle of development of a WPF application that is using Entity Framework (.NET 3.5). It accesses the entities in several places throughout. I am worried about consistency throughout the application in regard to the entities. Should I be instancing separate contexts in my different views, or should I (and is a a good way to do this) instance a single context that can be accessed globally? For instance, my entity model has three sections, Shipments (with child packages and further child contents), Companies/Contacts (with child addresses and telephones), and disk specs. The Shipments and EditShipment views access the DiskSpecs, and the OptionsView manages the DiskSpecs (Create, Edit, Delete). If I edit a DiskSpec, I have to have something in the ShipmentsView to retrieve the latest specs if I have separate contexts right? If it is safe to have one overall context from which the rest of the app retrieves it's objects, then I imagine that is the way to go. If so, where would that instance be put? I am using VB.NET, but I can translate from C# pretty good. Any help would be appreciated. I just don't want one of those applications where the user has to hit reload a dozen times in different parts of the app to get the new data. Update: OK so I have changed my app as follows: All contexts are created in Using Blocks to dispose of them after they are no longer needed. When loaded, all entities are detatched from context before it is disposed. A new property in the MainViewModel (ContextUpdated) raises an event that all of the other ViewModels subscribe to which runs that ViewModels RefreshEntities method. After implementing this, I started getting errors saying that an entity can only be referenced by one ChangeTracker at a time. Since I could not figure out which context was still referencing the entity (shouldn't be any context right?) I cast the object as IEntityWithChangeTracker, and set SetChangeTracker to nothing (Null). This has let to the current problem: When I Null the changeTracker on the Entity, and then attach it to a context, it loses it's changed state and does not get updated to the database. However if I do not null the change tracker, I can't attach. I have my own change tracking code, so that is not a problem. My new question is, how are you supposed to do this. A good example Entity query and entity save code snipped would go a long way, cause I am beating my head in trying to get what I once thought was a simple transaction to work. Any help would elevate you to near god-hood.

    Read the article

  • load google annotated chart within jquery ui tab content via ajax method

    - by twmulloy
    Hi, I am encountering an issue with trying to load a google annotated chart (http://code.google.com/apis/visualization/documentation/gallery/annotatedtimeline.html) within a jquery ui tab using content via ajax method (http://jqueryui.com/demos/tabs/#ajax). If instead I use the default tabs functionality, writing out the code things work fine: <div id="tabs"> <ul> <li><a href="#tabs-1">Chart</a></li> </ul> <div id="tabs-1"> <script type="text/javascript"> google.load('visualization', '1', {'packages':['annotatedtimeline']}); google.setOnLoadCallback(drawChart); function drawChart() { var data = new google.visualization.DataTable(); data.addColumn('date', 'Date'); data.addColumn('number', 'cloudofinc.com'); data.addColumn('string', 'header'); data.addColumn('string', 'text') data.addColumn('number', 'All Clients'); data.addRows([ [new Date('May 12, 2010'), 2, '2 New Users', '', 3], [new Date('May 13, 2010'), 0, undefined, undefined, 0], [new Date('May 14, 2010'), 0, undefined, undefined, 0], ]); var chart = new google.visualization.AnnotatedTimeLine(document.getElementById('chart_users')); chart.draw(data, { displayAnnotations: false, fill: 10, thickness: 1 }); } </script> <div id='chart_users' style='width: 100%; height: 400px;'></div> </div> </div> But if I use the ajax method for jquery ui tab and point to the partial for the tab, it doesn't work completely. The page renders and once the chart loads, the browser window goes white. However, you can see the tab partial flash just before the chart appears to finish rendering (the chart never actually displays). I have verified that the partial is indeed loading properly without the chart. <div id="tabs"> <ul> <li><a href="ajax/tabs-1">Chart</a></li> </ul> </div>

    Read the article

  • System architecture: simple approach for setting up background tasks behind a web application -- wil

    - by Tim Molendijk
    I have a Django web application and I have some tasks that should operate (or actually: be initiated) on the background. The application is deployed as follows: apache2-mpm-worker; mod_wsgi in daemon mode (1 process, 15 threads). The background tasks have the following characteristics: they need to operate in a regular interval (every 5 minutes or so); they require the application context (i.e. the application packages need to be available in memory); they do not need any input other than database access, in order to perform some not-so-heavy tasks such as sending out e-mail and updating the state of the database. Now I was thinking that the most simple approach to this problem would be simply to piggyback on the existing application process (as spawned by mod_wsgi). By implementing the task as part of the application and providing an HTTP interface for it, I would prevent the overhead of another process that is holding all of the application into memory. A simple cronjob can be setup that sends a request to this HTTP interface every 5 minutes and that would be it. Since the application process provides 15 threads and the tasks are quite lightweight and only running every 5 minutes, I figure they would not be hindering the performance of the web application's user-facing operations. Yet... I have done some online research and I have seen nobody advocating this approach. Many articles suggest a significantly more complex approach based on a full-blown messaging component (such as Celery, which uses RabbitMQ). Although that's sexy, it sounds like overkill to me. Some articles suggest setting up a cronjob that executes a script which performs the tasks. But that doesn't feel very attractive either, as it results in creating a new process that loads the entire application into memory, performs some tiny task, and destroys the process again. And this is repeated every 5 minutes. Does not sound like an elegant solution. So, I'm looking for some feedback on my suggested approach as described in the paragraph before the preceeding paragraph. Is my reasoning correct? Am I overlooking (potential) problems? What about my assumption that application's performance will not be impeded?

    Read the article

  • Install Trac on 64bits Windows 7

    - by Tufo
    I'm configuring a new Developing Server that came with Windows 7 64bits. It must have installed Trac with Subversion integration. I install Subversion with VisualSVN 2.1.1, clients with TortoiseSVN 1.6.7 and AnkhSVN 2.1.7 for Visual Studio 2008 SP1 integration. All works fine! my problem begun when going to Trac installation. I install python 2.6 all fine. Trac hasn't a x64 windows installer, so I installed it manually by compiling it with python console (C:\Python26\python.exe C:/TRAC/setup.py install). After that, I can create TRAC projects normally, the Trac core is working fine. And so the problem begins, lets take a look at the Trac INSTALL file: Requirements To install Trac, the following software packages must be installed: Python, version = 2.3. Subversion, version = 1.0. (= 1.1.xrecommended) Subversion SWIG Python bindings (not PySVN). PySQLite,version 1.x (for SQLite 2.x) or version 2.x (for SQLite 3.x) Clearsilver, version = 0.9.3 (0.9.14 recommended) Python: OK Subverion: OK Subversion SWIG Python bindings (not PySVN): Here I face the first issue, he asks me for 'cd' to the swig directory and run the 'configure' file, and the result is: C:\swigwin-1.3.40> c:\python26\python.exe configure File "configure", line 16 DUALCASE=1; export DUALCASE # for MKS sh ^ SyntaxError: invalid syntax PySQLite, version 1.x (for SQLite 2.x) or version 2.x (for SQLite 3.x): Don't need, as Python 2.6 comes with SQLLite Clearsilver, version = 0.9.3 (0.9.14 recommended): Second issue, Clearsilver only has 32bit installer wich does not recognize python installation (as registry keys are in different places from 32 to 64 bits). So I try to manually install it with python console. It returns me a error of the same kind as SWIG: C:\clearsilver-0.10.5>C:\python26\python.exe ./configure File "./configure", line 13 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ^ SyntaxError: invalid syntax When I simulate a web server using the "TRACD" command, it runs fine when I disable svn support but when I try to open the web page it shows me a error regarding ClearSilver is not installed for generating the html content. AND (for making me more happy) This TRAC will run over IIS7, I mustn't install Apache... I'm nearly crazy with this issue... HELP!!!

    Read the article

  • Maven best practice for generating multiple jars with different/filtered classes ?

    - by jaguard
    I developed a Java utility library (similarly to Apache Commons) that I use in various projects. Additionally to fat clients I also use it for mobile clients (PDA with J9 Foundation profile). In time the library that started as a single project spread over multiple packages. As a result I end up with a lot of functionality but not really needed in all the projects. Since this library is also used inside some mobile/PDA projects I need a way to collect just the used classes and generate the actual specialized jars Currently in the projects that area using this library, I have Ant jar tasks that generate (from the utility project) the specialized jar files (ex: my-util-1.0-pda.jar, my-util-1.0-rcp.jar) using include/exclude jar task features. This is mostly needed due to the generated jar size constraints for the mobile projects. Migrating now to Maven I just wonder if there are any best practices to arrive to something similar so I consider the following scenarios: [1] - additionally to the main jar artifact (my-lib-1.0.jar) also generating inside my-lib project the separate/specialized artifacts using classifiers (ex: my-lib-1.0-pda.jar) using Maven Jar Plugin or Maven Assembly Plugin filtering/includes ... I'm not very comfortable with this approach since it pollute the library with library consumers demands (filters) [2] - Create additional Maven projects for all the specialized clients/projects, that will "wrap" the "my-lib" and generate the filtered jar artifacts (ex: my-lib-wrapper-pda-1.0 ...etc). As a result, these wrapper projects will include the filtering (to generate the filtered artifact) and will depend just on the "my-lib" project and the client projects will depend on my-lib-wrapper-xxx-1.0 instead of my-lib-1.0. This approach my look problematic since even that will let "my-lib" project intact (with no additional classifiers & artifacts), basically will double the number of projects since for every client project I'll have one just to collect the needed classes from the "my-util" library ("my-pda-app" project will need a "my-lib-wrapper-for-my-pda-app" project/dependency) [3] - Into the every client project that use the library (ex: my-pda-app) add some specialized Maven plugins to trim - out (when generating the final artifact/package) the un-needed classes (ex: maven-assembly-plugin, maven-jar-plugin, proguard-maven-plugin) What is the best practice for solving this kind of problems in the "Maven way" ?!

    Read the article

  • Spring, Jersey and Viewable JSP Integration

    - by Brian D.
    I'm trying to integrate Spring 3.0.5 with Jersey 1.4. I seem to have everything working, but whenever I try and return a Viewable that points to a JSP, I get a 404 error. When I wasn't using spring I could use this filter: <filter> <filter-name>Jersey Filter</filter-name> <filter-class>com.sun.jersey.spi.container.servlet.ServletContainer</filter-class> <init-param> <param-name>com.sun.jersey.config.feature.Redirect</param-name> <param-value>true</param-value> </init-param> <init-param> <param-name>com.sun.jersey.config.property.packages</param-name> <param-value>cheetah.frontend.controllers</param-value> </init-param> <init-param> <param-name>com.sun.jersey.config.feature.FilterForwardOn404</param-name> <param-value>true</param-value> </init-param> <init-param> <param-name>com.sun.jersey.config.property.WebPageContentRegex</param-name> <param-value>/(images|css|jsp)/.*</param-value> </init-param> </filter> And I could return a Viewable to any JSP's, image, css that were stored in the appropriate folder. However, now that I have to use the SpringServlet to get spring integration, I'm at a loss for how to access resources, since I can't use the filter above. I've tried using this servlet mapping with no luck: <servlet> <servlet-name>jerseyspring</servlet-name> <servlet-class>com.sun.jersey.spi.spring.container.servlet.SpringServlet</servlet-class> <load-on-startup>1</load-on-startup> <init-param> <param-name>com.sun.jersey.config.property.WebPageContentRegex</param-name> <param-value>/(images|css|jsp)/.*</param-value> </init-param> </servlet> <servlet-mapping> <servlet-name>jerseyspring</servlet-name> <url-pattern>/*</url-pattern> </servlet-mapping> Does anyone know the proper configurations to achieve this? Thanks for any help.

    Read the article

  • Non-linear regression models in PostgreSQL using R

    - by Dave Jarvis
    Background I have climate data (temperature, precipitation, snow depth) for all of Canada between 1900 and 2009. I have written a basic website and the simplest page allows users to choose category and city. They then get back a very simple report (without the parameters and calculations section): The primary purpose of the web application is to provide a simple user interface so that the general public can explore the data in meaningful ways. (A list of numbers is not meaningful to the general public, nor is a website that provides too many inputs.) The secondary purpose of the application is to provide climatologists and other scientists with deeper ways to view the data. (Using too many inputs, of course.) Tool Set The database is PostgreSQL with R (mostly) installed. The reports are written using iReport and generated using JasperReports. Poor Model Choice Currently, a linear regression model is applied against annual averages of daily data. The linear regression model is calculated within a PostgreSQL function as follows: SELECT regr_slope( amount, year_taken ), regr_intercept( amount, year_taken ), corr( amount, year_taken ) FROM temp_regression INTO STRICT slope, intercept, correlation; The results are returned to JasperReports using: SELECT year_taken, amount, year_taken * slope + intercept, slope, intercept, correlation, total_measurements INTO result; JasperReports calls into PostgreSQL using the following parameterized analysis function: SELECT year_taken, amount, measurements, regression_line, slope, intercept, correlation, total_measurements, execute_time FROM climate.analysis( $P{CityId}, $P{Elevation1}, $P{Elevation2}, $P{Radius}, $P{CategoryId}, $P{Year1}, $P{Year2} ) ORDER BY year_taken This is not an optimal solution because it gives the false impression that the climate is changing at a slow, but steady rate. Questions Using functions that take two parameters (e.g., year [X] and amount [Y]), such as PostgreSQL's regr_slope: What is a better regression model to apply? What CPAN-R packages provide such models? (Installable, ideally, using apt-get.) How can the R functions be called within a PostgreSQL function? If no such functions exist: What parameters should I try to obtain for functions that will produce the desired fit? How would you recommend showing the best fit curve? Keep in mind that this is a web app for use by the general public. If the only way to analyse the data is from an R shell, then the purpose has been defeated. (I know this is not the case for most R functions I have looked at so far.) Thank you!

    Read the article

  • Oracle Coding Standards Feature Implementation

    - by Mike Hofer
    Okay, I have reached a sort of an impasse. In my open source project, a .NET-based Oracle database browser, I've implemented a bunch of refactoring tools. So far, so good. The one feature I was really hoping to implement was a big "Global Reformat" that would make the code (scripts, functions, procedures, packages, views, etc.) standards compliant. (I've always been saddened by the lack of decent SQL refactoring tools, and wanted to do something about it.) Unfortunatey, I am discovering, much to my chagrin, that there doesn't seem to be any one widely-used or even "generally accepted" standard for PL-SQL. That kind of puts a crimp on my implementation plans. My search has been fairly exhaustive. I've found lots of conflicting documents, threads and articles and the opinions are fairly diverse. (Comma placement, of all things, seems to generate quite a bit of debate.) So I'm faced with a couple of options: Add a feature that lets the user customize the standard and then reformat the code according to that standard. —OR— Add a feature that lets the user customize the standard and simply generate a violations list like StyleCop does, leaving the SQL untouched. In my mind, the first option saves the end-users a lot of work, but runs the risk of modifying SQL in potentially unwanted ways. The second option runs the risk of generating lots of warnings and doing no work whatsoever. (It'd just be generally annoying.) In either scenario, I still have no standard to go by. What I'd need to know from you guys is kind of poll-ish, but kind of not. If you were going to use a tool of this nature, what parts of your SQL code would you want it to warn you about or fix? Again, I'm just at a loss due to a lack of a cohesive standard. And given that there isn't anything out there that's officially published by Oracle, I think this is something the community could weigh in on. Also, given the way that voting works on SO, the votes would help to establish the popularity of a given "refactoring." P.S. The engine parses SQL into an expression tree so it can robustly analyze the SQL and reformat it. There should be quite a bit that we can do to correct the format of the SQL. But I am thinking that for the first release of the thing, layout is the primary concern. Though it is worth noting that the thing already has refactorings for converting keywords to upper case, and identifiers to lower case.

    Read the article

  • R Install/Update on Mac OS X (Snow Leopard): where does R put files during install/config?

    - by doug
    In sum, there's a stray preference-like file or two (probably just one) that i can't find. Here's the whole story: I recently attempted to update my R install from 2.10 to 2.11. As i have done before, i installed from source. I know that all of the dependencies are correctly installed and made available to R, because my prior install worked fine. When i upgraded to 2.11, i am unable to install packages (no exception thrown, it just doesn't appear to complete the install and is unresponsive so i have to quit + restart R. Given i install from source, there are any number of points in the process that i could have messed up. What i need to do now is "start over" which requires that i clear out my my prior install. I am having trouble doing that. There is still at least one preference file or something like that i can't find and one of these is causing the problem, so i need to find it and terminate it with extreme prejudice before i do a fresh install. Although i set a number of flags during the install, i have never opted out of the default install locations during the config step. There has to be one or more preference files still in my file structure (and that's also accessible to the new install of R) because after i follow all of the steps below, then do a fresh install, when i start R for the first time, some of my preferences have persisted (e.g., quartz settings, GUI background color, editor selection, etc.). Again, the problem is that i just cannot locate those files. Finally, the problem can't be that during my last install from source, i inadvertently caused a preference file to be sent to an off-spec location--because again, a fresh R install (whether from source or from the OS X binaries) is finding those files Here's what i've done prior to attempting a clean install of R: Removed files from these locations: ~/.RData ~/.RHistory /Applications/R64.app /Applications/R.app /Library/Frameworks/R.framework (i also removed all symlinks from these) Cleared all RAM and disk caches, in particular the directory where i know R caches: ~/Library/Caches/R* (in fact i've cleared this entire directory) Checked for all 'hidden' files in the OS X directories where login/startup files are often placed: /etc/ ~/ In addition, i've checked R-help, and i've also read through the relevant portions of 'R Installation and Administration'--no luck. I've also searched searched my file structure using the various bash utilities, which nearly always solves problems of this sort quite easily, but in this case obviously searching by name or even pattern is more problematic.

    Read the article

  • How can a test script inform R CMD check that it should emit a custom message?

    - by mariotomo
    I'm writing a R package (delftfews) here at office. we are using svUnit for unit testing. our process for describing new functionality: we define new unit tests, initially marked as DEACTIVATED; one block of tests at a time we activate them and implement the function described by the tests. almost all the time we have a small amount of DEACTIVATED tests, relative to functions that might be dropped or will be implemented. my problem/question is: can I alter the doSvUnit.R so that R CMD check pkg emits a NOTE (i.e. a custom message "NOTE" instead of "OK") in case there are DEACTIVATED tests? as of now, we see only that the active tests don't give error: . . * checking for unstated dependencies in tests ... OK * checking tests ... Running ‘doSvUnit.R’ OK * checking PDF version of manual ... OK which is all right if all tests succeed, but less all right if there are skipped tests and definitely wrong if there are failing tests. In this case, I'd actually like to see a NOTE or a WARNING like the following: . . * checking for unstated dependencies in tests ... OK * checking tests ... Running ‘doSvUnit.R’ NOTE 6 test(s) were skipped. WARNING 1 test(s) are failing. * checking PDF version of manual ... OK As of now, we have to open the doSvUnit.Rout to check the real test results. I contacted two of the maintainers at r-forge and CRAN and they pointed me to the sources of R, in particular the testing.R script. if I understand it correctly, to answer this question we need patching the tools package: scripts in the tests directory are called using a system call, output (stdout and stderr) go to one single file, there are two possible outcomes: ok or not ok, so I opened a change request on R, proposing something like bit-coding the return status, bit-0 for ERROR (as it is now), bit-1 for WARNING, bit-2 for NOTE. with my modification, it would be easy producing this output: . . * checking for unstated dependencies in tests ... OK * checking tests ... Running ‘doSvUnit.R’ NOTE - please check doSvUnit.Rout. WARNING - please check doSvUnit.Rout. * checking PDF version of manual ... OK Brian Ripley replied "There are however several packages with properly written unit tests that do signal as required. Please do take this discussion elsewhere: R-bugs is not the place to ask questions." and closed the change request. anybody has hints?

    Read the article

  • Event Listener in Google Charts API

    - by DeanGrobler
    I'm busy using Google Charts in one of my projects to display data in a table. Everything is working great. Except that I need to see what line a user selected once they click a button. This would obviously be done with Javascript, but I've been struggling for days now to no avail. Below I've pasted code for a simple example of the table, and the Javascript function that I want to use (that doesn't work). <html> <head> <script type='text/javascript' src='https://www.google.com/jsapi'></script> <script type='text/javascript'> google.load('visualization', '1', {packages:['table']}); google.setOnLoadCallback(drawTable); var table = ""; function drawTable() { var data = new google.visualization.DataTable(); data.addColumn('string', 'Name'); data.addColumn('number', 'Salary'); data.addColumn('boolean', 'Full Time Employee'); data.addRows(4); data.setCell(0, 0, 'Mike'); data.setCell(0, 1, 10000, '$10,000'); data.setCell(0, 2, true); data.setCell(1, 0, 'Jim'); data.setCell(1, 1, 8000, '$8,000'); data.setCell(1, 2, false); data.setCell(2, 0, 'Alice'); data.setCell(2, 1, 12500, '$12,500'); data.setCell(2, 2, true); data.setCell(3, 0, 'Bob'); data.setCell(3, 1, 7000, '$7,000'); data.setCell(3, 2, true); table = new google.visualization.Table(document.getElementById('table_div')); table.draw(data, {showRowNumber: true}); } function selectionHandler() { selectedData = table.getSelection(); row = selectedData[0].row; item = table.getValue(row,0); alert("You selected :" + item); } </script> </head> <body> <div id='table_div'></div> <input type="button" value="Select" onClick="selectionHandler()"> </body> </html> Thanks in advance for anyone taking the time to look at this. I've honestly tried my best with this, hope someone out there can help me out a bit.

    Read the article

  • How can the DataView object reference not be set?

    - by dboarman-FissureStudios
    I have the following sample where the SourceData class would represent a DataView resulting from an Sql query: class MainClass { private static SourceData Source; private static DataView View; private static DataView Destination; public static void Main (string[] args) { Source = new SourceData(); View = new DataView(Source.Table); Destination = new DataView(); Source.AddRowData("Table1", 100); Source.AddRowData("Table2", 1500); Source.AddRowData("Table3", 1300324); Source.AddRowData("Table4", 1122494); Source.AddRowData("Table5", 132545); Console.WriteLine(String.Format("Data View Records: {0}", View.Count)); foreach(DataRowView drvRow in View) { Console.WriteLine(String.Format("Source {0} has {1} records.", drvRow["table"], drvRow["records"])); DataRowView newRow = Destination.AddNew(); newRow["table"] = drvRow["table"]; newRow["records"] = drvRow["records"]; } Console.WriteLine(); Console.WriteLine(String.Format("Destination View Records: {0}", Destination.Count)); foreach(DataRowView drvRow in Destination) { Console.WriteLine(String.Format("Destination {0} has {1} records.", drvRow["table"], drvRow["records"])); } } } class SourceData { public DataTable Table { get{return dataTable;} } private DataTable dataTable; public SourceData() { dataTable = new DataTable("TestTable"); dataTable.Columns.Add("table", typeof(string)); dataTable.Columns.Add("records", typeof(int)); } public void AddRowData(string tableName, int tableRows) { dataTable.Rows.Add(tableName, tableRows); } } My output is: Data View Records: 5 Source Table1 has 100 records. Unhandled Exception: System.NullReferenceException: Object reference not set to an instance of an object at System.Data.DataView.AddNew () [0x0003e] in /usr/src/packages/BUILD/mono-2.4.2.3 /mcs/class/System.Data/System.Data/DataView.cs:344 at DataViewTest.MainClass.Main (System.String[] args) [0x000e8] in /home/david/Projects/DataViewTest/SourceData.cs:29 I did some reading here: DataView:AddNew Method... ...and it would appear that I am doing this the right way. How come I am getting the Object reference not set?

    Read the article

< Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >