Search Results

Search found 5864 results on 235 pages for 'secure gateway'.

Page 176/235 | < Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >

  • How can I determine the IP addresses allocated by DHCP on a router that I'm connected to?

    - by user234831
    This "router" is not a typical situation. I'm using my phone as a hotspot and can only configure a select number of DHCP options. I can manage the limit on how many devices/clients can use my phone as a hotspot. I have to select from a radio-button list with the options: 2,3,4,5, or 8 I can specify the DHCP starting IP address. In this case, it begins at 192.168.6.106 When I'm connected via WIFI to my phone, an ipconfig /all command shows me that the default gateway is 192.168.6.1 and my IPv4 address is 192.168.1.148. I have the luxury of connecting another device to the phone and that device was assigned 192.168.1.121. I've tried connecting to 192.168.6.1, hoping for some sort of router setup page that I'm used to seeing, but there is no such thing or maybe it's just a matter of incompatable operating systems. In summary, the "router" (phone) has an IP address of 192.168.6.1 and a DHCP server that begins at 192.168.6.106 and allows up to 8 connections. Normally, I would assume a range of 192.168.6.106 - 192.168.6.113, but connected clients are showing otherwise. How can I figure out which IP addresses are set aside by DHCP for clients?

    Read the article

  • Different subnets routing with just one layer 3 switch

    - by GustavoFSx
    Our current network looks like this: Location 1: 2 Layer 2 switches | subnet 192.168.1.0/24 | Firewall for our VPN Location 2: 1 Layer 2 switch | subnet 192.168.3.0/24 | Firewall for our VPN Location 3: 1 Layer 2 switch | subnet 192.168.5.0/24 | Firewall for our VPN We just got a direct fiber connection between location 1 and 2, we also got a new HP V1910 24G layer 3 switch. I tried to follow the instructions on this site, but I can't get it to work. I think our network should look like this: Location 1: HP Switch FIBER to L2 | subnet 192.168.1.0/24 | Firewall for our VPN Location 2: 1 Layer 2 switch | subnet 192.168.3.0/24 | FIBER to L1 Location 3: 1 Layer 2 switch | subnet 192.168.5.0/24 | Firewall for our VPN So, how can I get routing working on our location 2? It's old gateway was a firewall device on ip 192.168.3.1. I'm thinking on creating a VLAN Interface on 192.168.3.1 on the switch for the Location 2. But how will I handle that on the HP switch that has a direct fiber connection with that switch? Please help, I'm not very good with networking.

    Read the article

  • Iptables - forward email ports?

    - by Emmet Brown
    im trying to open some local ports (LAN) and then re-direct them to another server (WAN) using iptables. Here is my config: #WAN allow-hotplug eth1 auto eth1 iface eth1 inet static #Tarjeta red WAN address 192.168.2.2 gateway 192.168.2.1 netmask 255.255.255.0 #LAN allow-hotplug eth0 auto eth0 iface eth0 inet static address 192.168.16.6 netmask 255.255.255.0 network 192.168.16.0 broadcast 192.168.16.255 I try this: iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 110 -j DNAT --to 200.40.30.218:110 iptables -A FORWARD -p tcp -i eth0 -o eth1 -d 200.40.30.218 --dport 110 -j ACCEPT iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 25 -j DNAT --to 200.40.30.218:25 iptables -A FORWARD -p tcp -i eth0 -o ethq -d 200.40.30.218 --dport 25 -j ACCEPT but, it did not work. i also try changeing eth0 to eth1 (and eth1 to eth0) but nothing happened. Starting Nmap 5.00 ( http://nmap.org ) at 2011-10-03 14:44 UYST Interesting ports on 192.168.16.6: Not shown: 997 closed ports PORT STATE SERVICE 22/tcp open ssh 111/tcp open rpcbind 8080/tcp open http-proxy Im running debian. Can u guys help me to check what is happening? edit: IPTABLES-SAVE # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *mangle :PREROUTING ACCEPT [139993:77867651] :INPUT ACCEPT [139385:77761761] :FORWARD ACCEPT [186:12071] :OUTPUT ACCEPT [173556:74341650] :POSTROUTING ACCEPT [173734:74352988] COMMIT # Completed on Mon Oct 3 15:43:14 2011 # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *nat :PREROUTING ACCEPT [1649:190626] :POSTROUTING ACCEPT [6729:339646] :OUTPUT ACCEPT [6697:337660] -A PREROUTING -i eth0 -p tcp -m tcp --dport 110 -j DNAT --to-destination 200.40.30.218:110 -A PREROUTING -i eth0 -p tcp -m tcp --dport 25 -j DNAT --to-destination 200.40.30.218:25 COMMIT # Completed on Mon Oct 3 15:43:14 2011 # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *filter :INPUT ACCEPT [138307:77066136] :FORWARD ACCEPT [168:11207] :OUTPUT ACCEPT [172288:73655708] -A FORWARD -d 200.40.30.218/32 -i eth0 -o eth1 -p tcp -m tcp --dport 110 -j ACCEPT -A FORWARD -d 200.40.30.218/32 -i eth0 -o ethq -p tcp -m tcp --dport 25 -j ACCEPT COMMIT # Completed on Mon Oct 3 15:43:14 2011 Regards

    Read the article

  • Receiving and processing SMS messages through a script?

    - by ShankarG
    I am attempting to setup a system to receive and process SMS messages automatically. The system is intended for use in a context (an unfunded migrant workers' union in India) where both finances and sysadmin skills are extremely constrained (I would be the only person, in the near future, who would be administering the system). The intention is to make some functions - registration of members, generation of ID cards, communication of alerts and other information - easier. However, for receiving and sending SMS, I have not been able to find any email to SMS or other kind of gateway that functions in India. Perhaps there is one (edit: apparently Clickatell does have an India service, but the prices appear astronomical). If not, can one rely on a USB mobile modem (such as those provided by many mobile providers in India)? It seems like, with utilities such as gammu or bitpim, SMS operations on such a modem could be scripted. Is this actually feasible, though? Thanks in advance for your thoughts and suggestions. edit: Original first question removed since the two questions had little to do with each other. The original first question has been asked separately here

    Read the article

  • How can I ensure that my static ip address is read from /etc/network/interfaces rather than dhcp?

    - by jonderry
    This is a follow up to the following question. I'm trying to set a static IP by changing /etc/network/interfaces to the following: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.2.133 netmask 255.255.255.0 gateway 192.168.2.1 dns-nameservers 8.8.8.8 and then running /sbin/ifdown eth0; /sbin/ifup eth0. However, the change in IP address doesn't appear to take effect without editing /etc/dhcp/dhclient.conf and commenting out the following before running ifdown; ifup: request subnet-mask, broadcast-address, time-offset, routers, domain-name, domain-name-servers, domain-search, host-name, dhcp6.name-servers, dhcp6.domain-search, netbios-name-servers, netbios-scope, interface-mtu, rfc3442-classless-static-routes, ntp-servers, dhcp6.fqdn, dhcp6.sntp-servers; Strangely, after commenting out this line, running ifdown; ifup works, but when I uncomment it, the behavior does not revert to the previous behavior of ignoring changes to my settings in /etc/network/interfaces (this doesn't seem like a problem, but I really need to be able to repeat this problem so that I can be confident that my solution is robust) Also, I'd rather not have to edit /etc/dhcp/dhclient.conf to change my static IP since it seems I should be able to do this by only editing interfaces. Can anyone explain the issues I'm seeing above and suggest the best way of making changes to static IP addresses take effect that admits reproducibility so that I can be sure that my approach works?

    Read the article

  • Are two periods allowed in the local-part of an email address?

    - by Mike B
    A third-party email gateway relay is refusing to process a message for an email address we're sending to. The address is in the format of [email protected] (note the two periods). Is this allowed by RFC guidelines? RFC 2822 seems to object to this in section 3.4.1: The locally interpreted string is either a quoted-string or a dot-atom. If the string can be represented as a dot-atom (that is, it contains no characters other than atext characters or "." surrounded by atext characters), then the dot-atom form SHOULD be used and the quoted-string form SHOULD NOT be used. Comments and folding white space SHOULD NOT be used around the "@" in the addr-spec. Furthermore, in that same section, it references this: addr-spec = local-part "@" domain local-part = dot-atom / quoted-string / obs-local-part I interpret this to mean that the localpart can have content separated by dots but there cannot be two successive dots, and it cannot start or end with a dot. That being said, I'm not familiar with dot-atom syntax so maybe I'm mistaken here. Can someone please confirm and explain?

    Read the article

  • Using a second Wifi Router (in order to use a LAN port)

    - by Sledge81
    Problem: Connecting a TV decoder via Internet. It doesn't have inbuilt wifi so wired LAN is the only option. I bought a second Wifi Router so I could use its LAN port to create a wired internet connection to my decoder. What I want to achieve: The second Wifi Router should basically pick up the signal from the main wifi router. I would then use the LAN port to connect (with a wire) to the TV decoder. In other words have my secondary Wifi Router act as an access point, which will enable me to use a wired LAN connection to the decoder. What i've done so far: Connected the second Wifi Router to my laptop via the LAN ports. Access 192.168.1.1 and went into my second router. 1) SSID set to the same one as the main Wifi Router 2) Tried disabling DHCP and enabling DHCP (with the DNS and default gateway configured the same as the main router). When I check my network connections, I see the LAN connection too but it says 'Not connected to the internet' while the Wifi (main router) shows connected. Can someone please advise on how to use my second Wifi Router to connect to the main Wifi Router (and thus the Internet). Thanks. main wifi router: Zyxel secondary wifi router: TP Link

    Read the article

  • How to prevent response to who-has requests on virtual eth interface?

    - by user42881
    Hi, we use small embedded X86 linux servers equipped with a single physical ethernet port as a gateway for an IP video surveillance application. Each downstream IP cam is mapped to a separate virtual IP address like this: real eth0 IP address= 192.168.1.1, camera 1 (eth0:1) =192.168.1.61, camera 2 (eth0:2) =192.168.1.62, etc. etc. all on the same eth0 physical port. This approach works well, except that a specific third-party windows video recording application running on a separate PC on the same LAN, automatically pings the virtual IPs looking for unique who-has responses on system startup and, when it gets back the same eth0 MAC address for each virtual interface, freaks out and won't allow us to subsequently manually enter those addresses. The windows app doesn't mind, tho, if it receives no answer to the who-has ping. My question - how can we either (a) shut off the who-has responses just for the virtual eth0:x interfaces while keeping them for the primary physical eth0 port, or, in the alternative, spoof a valid but different MAC address for each virtual interface? Thanks!

    Read the article

  • Local traffic through VPN, global traffic through WAN

    - by ikonoma
    I have an issue with my internet connection. I am using VPN (Aventail Client) to access the local resources. When connected to VPN the Internet traffic passes through it, not through my LAN or Wi-Fi network. I would like to change the routing table to use the Wi-Fi adapter of the PC for WAN traffic. I have routing file, which works very well and routes the traffic in this way, but only when I am physically connected to the local network through LAN. But I can't set it to work with the VPN connection, because I have no gateway when I am connected to it. Etc this in bold is missing. What to do? route change 0.0.0.0 mask 0.0.0.0 172.16.76.1 metric 200 if 12 route change 0.0.0.0 mask 0.0.0.0 10.44.2.1 metric 400 if 11 route add 150.251.0.0 mask 255.255.0.0 10.44.2.1 metric 100 if 11 route add 10.0.0.0 mask 255.0.0.0 10.44.2.1 metric 100 if 11 pause

    Read the article

  • Xen HVM Windows 2008 network bridge

    - by JavierMartinz
    I have a problem with the Windows Server 2008 guest (hvm). I can't get a network interface running for him. I also have a Debian guest and it's working ok, but I can't do it with the Win2k8 guest. When I started the VM, the machine freezes and I can't connect by ssh to the host. /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 188.165.B.C netmask 255.255.255.0 network 188.165.B.0 broadcast 188.165.255.255 gateway 188.165.B.254 brctl show bridge name bridge id STP enabled interfaces eth0 8000.e840f20acc28 no peth0 /etc/xen/xend-config.sxp ... (vif-script vif-bridge) (network-script 'network-bridge') ... /etc/xen/win2k8.cfg # Networking # vif = [ 'ip=5.39.F.G,mac=yy:yy:yy:yy:yy:yy,type=ioemu,bridge=eth0' ] /etc/xen/debian.cfg # Networking # vif = [ 'ip=178.33.D.E,mac=xx:xx:xx:xx:xx:xx' ] As you can see, in the Debian guest I only have to specify an IP address and a MAC. But if I put that in the Win2k8 guest, the machine does not start. I am using Xen 4.0

    Read the article

  • Lenovo Thinkpad T430 not booting from HDD if there is a USB modem connected

    - by user93353
    I have a T430 Levono Thinkpad running Win7. I use a ZTE USB modem (something like this) for my internet connection. I usually keep the modem plugged into the USB drive even when the laptop is shutdown or hibernating. This worked fine on my earlier laptops. But with the Lenovo, my laptop doesn't boot if the modem is in the USB drive. It shows the initial character based screen where it gives the Thinkpad message & BIOS details and then waits. If I pull out the modem, it goes ahead. I have disabled USB as a boot option in my BIOS settings, but even then this happens sometimes (but not all the times). Likewise while resuming from hibernation. The USB modem also has drivers & ISP connection client which getting installed the first time you use it on any machine. I have used multiple laptops (HP, DELL, Acer, Gateway) but never faced this problem before. I have friends who use other Thinkpad models but haven't faced this issue. Any resolutions, workarounds for this?

    Read the article

  • OpenVPN / iptables restrict some access

    - by RitonLaJoie
    I want to create an openvpn service on a dedicated server I have, for some friends so that they are able to play online games faster. Is there an easy way to restrict which traffic I allow them with iptables ? It seems iptable is not very easy to maintain and we can easily get kicked out of our own server. Rebooting on a rescue mode every time I would get kicked out because of bad iptable rules would just be a pain. As far as I understand, the tun interface would be providing the access. Which kind of rule in iptables would I have to implement to restrict their access to only 1 ip ? Also, I don't want this vpn to be the default gateway for all the traffic. I guess I should go with the option of pushing a route to the clients so that they connect to the IP of the game server through the VPN and use their regular routes through their ISP for all the other traffic ? As a side not, it seems Openvpn AS is not very robust. Is there some other (commercial is ok) product that would give me the same administration options through a web interface ? Is Webmin the only other solution ? Thanks !

    Read the article

  • Formatting a former RAID 0 drive through USB

    - by EXC
    I'll try to be as specific as possible here: I was using two Hitachi 2.5" 500 gb HDDs in my Gateway P-7805u laptop in a RAID 0 configuration. The array was causing the laptop to run extremely hot, however, so I removed them and deleted the RAID array through Intel Matrix HDD manager. I did a clean install of Windows 7 on the original 320 gb HDD that came with the laptop. I never did format the original RAID array HDDs before taking them out of the computer. Now, I am attempting to format the Hitachi 500 gb RAID array HDDs externally through a USB external enclosure. The external HDD drivers install on my clean install OS, but when I go into 'My Computer' there is no external drive available. I cannot format in CMD Prompt because my computer will not designate a drive letter to the external HDD. The drivers install and the HDD is recognized as a Hitachi external drive, but nothing seems to show up in my computer window. I need to know if there is a way to format these drives to NTFS externally.

    Read the article

  • Anonymizing OpenVPN Allow SSH Access to Internal Server

    - by Lionel
    I'm using an anonymizing VPN, but want SSH access to internal computer. How do I access my internal computer through SSH? When I do ssh 98.123.45.6, the connection times out. IP address from cable provider: 98.123.45.6 Anonymous IP through VPN: 50.1.2.3 Internal computer: 192.168.1.123 When searching around, I found recommendations to either set up iptables rules, routing rules, or to add ListenAddress to sshd_config. Which of these applies to my case? Here is my route: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.115.81.1 10.115.81.9 255.255.255.255 UGH 0 0 0 tun0 10.115.81.9 * 255.255.255.255 UH 0 0 0 tun0 50.1.2.3-sta ddwrt 255.255.255.255 UGH 0 0 0 eth0 192.168.1.0 * 255.255.255.0 U 202 0 0 eth0 169.254.0.0 * 255.255.0.0 U 204 0 0 vboxnet0 loopback * 255.0.0.0 U 0 0 0 lo default 10.115.81.9 128.0.0.0 UG 0 0 0 tun0 128.0.0.0 10.115.81.9 128.0.0.0 UG 0 0 0 tun0 default ddwrt 0.0.0.0 UG 202 0 0 eth0

    Read the article

  • Using iptables to make a VPN router

    - by lost_in_the_sauce
    I am attempting to make a VPN connection to a third party VPN site, then forward traffic from my internal computers (ssh and ping for now) out to the VPN site using IPTables. 3rd Party <- (tun0/eth0)Linux VPN Box(eth1) <- Windows7TestBox I am running on CentOS 6.3 Linux and have two network connections eth0-public eth1-private. I am running vpnc-0.5.3-4 which is currently connecting to my destination. When I connect I am able to ping the destination IPAddresses but that is as far as I can get. ping -I tun0 10.1.33.26 success ping -I eth0 10.1.33.26 fail ping -I eth1 10.1.33.26 fail I have my private network Windows 7 test box set up to have the eth1 (private) network of my VPN Server as its gateway and can ping him fine. I need IPTables to send the Windows 7 traffic out the VPN tunnel. I have tried for a few days many different IPTables configurations from this site and others, either the other examples are too simple or overly complicated. The only thing this server is doing is connecting to the VPN and forwarding all traffic. So we can "flush" everything and start from scratch here. It is a blank slate. #!/bin/bash echo "Define variables" ipt="/sbin/iptables" echo "Zero out all counters" $ipt -Z $ipt -t nat -Z $ipt -t mangle -Z echo "Flush all active rules, delete all chains" $ipt -F $ipt -X $ipt -t nat -F $ipt -t nat -X $ipt -t mangle -F $ipt -t mangle -X $ipt -P INPUT ACCEPT $ipt -P FORWARD ACCEPT $ipt -P OUTPUT ACCEPT $ipt -t nat -A POSTROUTING -o tun0 -j MASQUERADE $ipt -A FORWARD -i eth1 -o eth0 -j ACCEPT $ipt -A FORWARD -i eth0 -o eth1 -j ACCEPT $ipt -A FORWARD -i eth0 -o tun0 -j ACCEPT $ipt -A FORWARD -i tun0 -o eth0 -j ACCEPT Again I have done many variations of the above and many other rules from other posts but haven't been able to move forward. It seems like such a simple task, and yet....

    Read the article

  • How to route 1 VPN through another on OS X?

    - by Eeep
    Hi everyone. Thanks a lot for your help! I've been tinkering with this for a while and have read many posts along with Googling for help, but my knowledge of TCP/IP is really weak... I have access to two different VPN servers. 1 Is set up in Network Settings and connects through PPP 2 Is set up through Tunnelblick and uses OpenVPN. I can connect to either tunnel #1 or tunnel #2, but not both one after the other... One of my major to-do's this year is study TCP/IP, but for now, would you be super-helpful and help me fix this really clearly? I have no experience with routing, DNS, gateways or any of that. If you tell me, "Set your gateway to XXX.XXX.XX.XXX" can you specify how I get that IP, off of what interface so I don't get messed up? I can figure out the terminal just fine if you let me know what to type, and I WILL read the man pages on everything you help me with. Thanks a million!

    Read the article

  • Windows 7 computer apparently connected to working wireless network but can't access router page or internet

    - by Hemmer
    I can consistently connect successfully to both the router and the internet using both my phone and two different computers which strongly suggests that the issue is at the desktop end. Only my Windows 7 desktop machine has stopped getting internet connectivity. It manages to connect to the router's network using the Windows 7 wireless dialog, but can't access either the router configuration page (192.168.1.1) or the internet in general once connected. The strange thing is the wireless network icon in the notification bar shows a full strength signal, sometimes with the yellow warning triangle. The output of ipconfig /all is: Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-12-17-94-98-90 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.102(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 08 June 2011 10:32:16 Lease Expires . . . . . . . . . . : 08 June 2011 12:32:16 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 NetBIOS over Tcpip. . . . . . . . : Enabled I've tried renewing DCHP settings disabling IPv6 resetting TCP stack uninstalling and reinstalling WLAN card drivers I've not installed anything new or made any changes to my knowledge, this just happened out of the blue. The only possible change is my friend connected his macbook to the network, but that has gone now and shouldn't have any lasting effects? TCP/IPv4 is set to automatically find an IP address. Antivirus is MSE (up to date) and doesn't detect anything unusual. Any ideas where to go next? Any help is greatly appreciated. For reference, the results of ipconfig /all on one of the working computers is: Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-16-CF-67-E5-97 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 Lease Obtained. . . . . . . . . . : 08 June 2011 10:26:38 Lease Expires . . . . . . . . . . : 08 June 2011 12:26:38 UPDATE: Still not working, but I've managed to find a temporary workaround by tethering my Android phone, effectively becoming a new wifi adapter. Will be moving to a new flat so will test if it is a network specific thing - maybe the card has got damaged somehow? Also will see if the card is working with Linux soon.

    Read the article

  • Iptables state tracking

    - by complexgeek
    Hi there. I've just taken over administration of a fairly complex firewall ruleset for a firewall box running Fedora Core 12, and there's one thing about it that is puzzling me. When I run nmap on the gateway from outside the network, I see all the expected services, but also sunrpc on port 111. The INPUT chain has DEFAULT DROP set, and there is no rule allowing port 111. As best I can tell (watching the packet counters before/during/after the scan) it's being allowed by the rule: "-m state --state RELATED,ESTABLISHED -j ACCEPT" but I don't understand why a brand new TCP connection would be considered RELATED or ESTABLISHED. Any suggestions would be greatly appreciated. EDIT: Conntrack modules: nf_conntrack_netlink 14925 0 nfnetlink 3479 1 nf_conntrack_netlink nf_conntrack_irc 5206 1 nf_nat_irc nf_conntrack_proto_udplite 3138 0 nf_conntrack_h323 62110 1 nf_nat_h323 nf_conntrack_proto_dccp 6878 0 nf_conntrack_sip 16921 1 nf_nat_sip nf_conntrack_proto_sctp 11131 0 nf_conntrack_pptp 10673 1 nf_nat_pptp nf_conntrack_sane 5458 0 nf_conntrack_proto_gre 6574 1 nf_conntrack_pptp nf_conntrack_amanda 2796 1 nf_nat_amanda nf_conntrack_ftp 11741 1 nf_nat_ftp nf_conntrack_tftp 4665 1 nf_nat_tftp nf_conntrack_netbios_ns 1534 0 nf_conntrack_ipv6 18504 2 ipv6 279399 40 ip6t_REJECT,nf_conntrack_ipv6 INPUT chain on the filter table: -A INPUT -s 192.168.200.10/32 -p tcp -m tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT -A INPUT -s 127.0.0.0/8 -i lo -j ACCEPT -A INPUT -p udp -m udp --sport 67:68 --dport 67:68 -j ACCEPT -A INPUT -d 192.168.200.5/32 -i eth0 -j ACCEPT -A INPUT -d 192.168.1.2/32 -i eth0 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p tcp -m multiport --dports 22,80,443 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p tcp -m multiport --sports 22,25,80,443 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p udp -m udp --dport 1194 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p udp -m udp --sport 1194 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p udp -m multiport --sports 53,123 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p icmp -m icmp --icmp-type 8 -j ACCEPT -A INPUT -i eth0 -m state --state NEW -j ACCEPT -A INPUT -d {public_ip}/32 -m state --state NEW -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT eth0 is connected to the internal network, eth3 is connected to an ADSL modem in bridge mode, ppp0 is the WAN connection tunneled over eth3.

    Read the article

  • Can't capture https traffic with Fiddler and Firefox (works with IE)

    - by Tony_Henrich
    I am trying to debug an asp.net app using Firefox. Firefox tries to connect to https://www.paypal.com and I get "Secure Connection Failed" error (Error code: sec_error_bad_signature). I installed Fiddler's cert in Firefox and the local computer and current user Cert stores. I set up the manual proxy in FF to 127.0.0.1 and port 8888 and for all protocols. Fiddler captures http traffic but gives an error with https traffic. Fiddler captures https from IE fine. What's the problem? (Is FiddlerHook FF extension needed and what setting should it be using: auto, disabled or Force traffic to Fiddler?)

    Read the article

  • DefaultHttpClient GET and POST commands Java Android

    - by RenegadeAndy
    Ok this is my application : An Android app to allow me to submit CokeZone codes into CokeZone.co.uk from a mobile app instead of from the website. So I wrote this section of code to do the post logon command and then check to see if im logged in after. Problem is - the html I get from the homepage after I send the post command is the default - as if im not logged in - so something is going wrong. Can anyone please help! Its probably the URL im sending the POST to, or the params within the POST command - I havent done much of this stuff so its probably something obvious. Below is my code so far: DefaultHttpClient httpclient = new DefaultHttpClient(); HttpGet httpget = new HttpGet(url); HttpResponse response = httpclient.execute(httpget); HttpEntity entity = response.getEntity(); thisResponse = printPage(entity.getContent()); Log.e("debug",thisResponse); System.out.println("Login form get: " + response.getStatusLine()); if (entity != null) { entity.consumeContent(); } System.out.println("Initial set of cookies:"); List<Cookie> cookies = httpclient.getCookieStore().getCookies(); if (cookies.isEmpty()) { System.out.println("None"); } else { for (int i = 0; i < cookies.size(); i++) { System.out.println("- " + cookies.get(i).toString()); } } HttpPost httpost = new HttpPost("https://secure.cokezone.co.uk/home/blank.jsp?_DARGS=/home/login/login.jsp"); List <NameValuePair> nvps = new ArrayList <NameValuePair>(); nvps.add(new BasicNameValuePair("_dyncharset", "ISO-8859-1")); nvps.add(new BasicNameValuePair("/grlp/login/LoginHandler.loginFormBean.name","renegadeandy%40gmail.com")); nvps.add(new BasicNameValuePair("_D:/grlp/login/LoginHandler.loginFormBean.name", "+")); nvps.add(new BasicNameValuePair("/grlp/login/LoginHandler.cookiedUser", "false")); nvps.add(new BasicNameValuePair("_D:/grlp/login/LoginHandler.cookiedUser", "+")); nvps.add(new BasicNameValuePair("/grlp/login/LoginHandler.loginFormBean.password", "passwordval")); nvps.add(new BasicNameValuePair("_D:/grlp/login/LoginHandler.loginFormBean.password", "+")); nvps.add(new BasicNameValuePair("/grlp/login/LoginHandler.rememberMe", "yes")); nvps.add(new BasicNameValuePair("_D:/grlp/login/LoginHandler.rememberMe", "false")); nvps.add(new BasicNameValuePair("/grlp/login/LoginHandler.aSuccessURL", "http://www.cokezone.co.uk/home/index.jsp")); nvps.add(new BasicNameValuePair("_D:/grlp/login/LoginHandler.aSuccessURL", "+")); nvps.add(new BasicNameValuePair("/grlp/login/LoginHandler.aErrorURL", "http://www.cokezone.co.uk/home/index.jsphttps://secure.cokezone.co.uk/home/index.jsp")); nvps.add(new BasicNameValuePair("/grlp/login/LoginHandler.aErrorURL", "+")); nvps.add(new BasicNameValuePair("/grlp/login/LoginHandler.explicitLogin", "true")); nvps.add(new BasicNameValuePair("_D:/grlp/login/LoginHandler.explicitLogin", "+")); nvps.add(new BasicNameValuePair("/grlp/login/LoginHandler.fICLogin", "login")); nvps.add(new BasicNameValuePair("_D:/grlp/login/LoginHandler.fICLogin", "+")); nvps.add(new BasicNameValuePair("/grlp/login/LoginHandler.fICLogin", "LOGIN")); nvps.add(new BasicNameValuePair("_D:/grlp/login/LoginHandler.fICLogin", "+")); nvps.add(new BasicNameValuePair("_DARGS", "/home/login/login.jsp")); httpost.setEntity(new UrlEncodedFormEntity(nvps, HTTP.UTF_8)); response = httpclient.execute(httpost); entity = response.getEntity(); System.out.println("Login form get: " + response.getStatusLine()); if (entity != null) { thisResponse = printPage(entity.getContent()); entity.consumeContent(); } Log.e("debug",thisResponse); Log.e("debug","done"); httpget = new HttpGet("http://www.cokezone.co.uk/home/index.jsp"); response = httpclient.execute(httpget); entity = response.getEntity(); TextView points = (TextView)findViewById(R.id.points); points.setText(getPoints(entity.getContent()).toString()); debug.setText(thisResponse); System.out.println("Post logon cookies:"); cookies = httpclient.getCookieStore().getCookies(); if (cookies.isEmpty()) { System.out.println("None"); } else { for (int i = 0; i < cookies.size(); i++) { System.out.println("- " + cookies.get(i).toString()); } }

    Read the article

  • Send mail via gmail with PowerShell V2's Send-MailMessage

    - by Scott Weinstein
    I'm trying to figure out how to use PowerShell V2's Send-MailMessage with gmail. Here's what I have so far. $ss = new-object Security.SecureString foreach ($ch in "password".ToCharArray()) { $ss.AppendChar($ch) } $cred = new-object Management.Automation.PSCredential "[email protected]", $ss Send-MailMessage -SmtpServer smtp.gmail.com -UseSsl -Credential $cred -Body... I get the following error Send-MailMessage : The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required. Learn more at At foo.ps1:18 char:21 + Send-MailMessage <<<< ` + CategoryInfo : InvalidOperation: (System.Net.Mail.SmtpClient:SmtpClient) [Send-MailMessage], SmtpException + FullyQualifiedErrorId : SmtpException,Microsoft.PowerShell.Commands.SendMailMessage Am I doing something wrong, or is Send-MailMessage not fully baked yet (I'm on CTP 3)? Edit - two additional restrictions I want this to be non-interactive, so get-credential won't work The user account isn't on the gmail domain, but an google apps registered domain

    Read the article

  • How do you bypass TLS/SSL cetification validation in WCF for Exchange Web Services

    - by Sevki
    I wan't to bypass SSL and use regular http protocol to connect to a Exchange 2007 server however we dont want to invest in a real SSL cert and the one we use is needed for blackberry enterprise server. Is there a way to bypass this here is the exception Request failed. The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. Service.Credentials = new WebCredentials(ShacxEwsUserName, ShacxEwsUserPassword, ShacxEwsUserDomain); Service.Url = new Uri(ShacxEwsServiceUrl); How do you make ExchangeService accept bad ssl.

    Read the article

  • Cannot import resource > "app/config/security.yml" from "/app/config/config.yml"

    - by tirengarfio
    Im getting this error: FileLoaderLoadException: Cannot import resource "app/config/security.yml" from "/app/config/config.yml". The file security.yml is on the right path. This is my security.yml file: jms_sapp/confiapp/config/security.yml secure_all_services: false exprapp/confiapp/config/security.yml security: encoders: Symfony\Component\Security\Core\User\User: plaintext role_hierarchy: ROLE_ADMIN: ROLE_USER ROLE_SUPER_ADMIN: [ROLE_USER, ROLE_ADMIN, ROLE_ALLOWED_TO_SWITCH] providers: in_memory: memory: users: user: { password: userpass, roles: [ 'ROLE_USER' ] } admin: { password: adminpass, roles: [ 'ROLE_ADMIN' ] } firewalls: dev: pattern: ^/(_(profiler|wdt)|css|images|js)/ security: false login: pattern: ^/demo/secured/login$ security: false secured_area: pattern: ^/demo/secured/ form_login: check_path: /demo/secured/login_check login_path: /demo/secured/login logout: path: /demo/secured/logout target: /demo/ #anonymous: ~ #http_basic: # realm: "Secured Demo Area" access_control: #- { path: ^/login, roles: IS_AUTHENTICATED_ANONYMOUSLY, requires_channel: https } #- { path: ^/_internal/secure, roles: IS_AUTHENTICATED_ANONYMOUSLY, ip: 127.0.0.1 }

    Read the article

  • Using long polling with WinForms Clients in .NET

    - by user544538
    Hi We need to develop a .NET application, basically a WinForms client, which needs to be notified of changes only from the server to update the UI only in case of necessity and not every time. We initially thought of NetTCPBinding but understood that it has problems with firewalls across domains and secure networks. We now consider long-polling as a viable option but we could only find this being used with WPF and XAML clients. For example, http://code.msdn.microsoft.com/duplexhttp But we could not find anything with WinForms. My opinion is that long-polling has to do with WCF and does not matter what UI technology is used (within .NET). Do you think it is possible to use long-polling with a custom WCF channel for WinForms? I am on the way to develop a POC but dont have much time. Any help in the right direction is much appreciated. Thanks much Charles

    Read the article

  • Android: How to obtain Mac Address of WiFi Network Interface?

    - by Gubatron
    It seems the java.net.NetworkInterface implementation of android does not have a byte[] getHardwareAddress() method http://developer.android.com/reference/java/net/NetworkInterface.html I've found several forums of people trying to do this with no definitive answer, I need to get a somewhat cross-device UUID, so I can't rely on phone numbers or in ANDROID_ID (which can be overwritten and which I think depends on the user having a google account) http://developer.android.com/reference/android/provider/Settings.Secure.html#ANDROID_ID In linux you can use ifconfig or read from /proc/net/arp and you can easily get the Hardware address. Is there a file in android that I can read? There has to be a way to get this address since it's shown in the "Settings About Phone Status" of the phone.

    Read the article

< Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >