Search Results

Search found 8193 results on 328 pages for 'dev ray'.

Page 177/328 | < Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >

  • How to mount a drive in Ubuntu from terminal

    - by Mirage
    hi, I want to mount a drive from terminal at start up. At start if i use ls /media then its empty but if i go to computer and then click VM drive there and after that i use ls /media then it shows VM drive . How can i mount that drive at from terminal something like mount VM or how can find the path of VM like /dev/sda or something

    Read the article

  • ZFS Recover from Faulted Pool State

    - by nickv2002
    I have a six disk ZFS raidz1 pool and had a recent failure requiring a disk replacement. No problem normally, but this time my server hardware died before I could do the replacement (but after and unrelated to the drive failure as far as I can tell). I was able to get another machine from a friend to rebuild the system, but in the process of moving my drives over I had to swap their cables around a bunch until I got the right configuration where the remaining 5 good disks were seen as online. This process seems to have generated some checksum errors for the pool/raidz. I have the 5 remaining drives set up now and a good drive installed and ready to take the place of the drive that died. However, since my pool state is FAULTED I'm unable to do the replacement. root@zfs:~# zpool replace tank 1298243857915644462 /dev/sdb cannot open 'tank': pool is unavailable Is there any way to recover from this error? I would think that having 5 of the 6 drives online would be enough to rebuild the right data, but that doesn't seem to be enough now. Here's the status log of my pool: root@zfs:~# zpool status tank pool: tank state: FAULTED status: One or more devices could not be used because the label is missing or invalid. There are insufficient replicas for the pool to continue functioning. action: Destroy and re-create the pool from a backup source. see: http://zfsonlinux.org/msg/ZFS-8000-5E scan: none requested config: NAME STATE READ WRITE CKSUM tank FAULTED 0 0 1 corrupted data raidz1-0 ONLINE 0 0 8 sdd ONLINE 0 0 0 sdf ONLINE 0 0 0 sdh ONLINE 0 0 0 1298243857915644462 UNAVAIL 0 0 0 was /dev/sdb1 sde ONLINE 0 0 0 sdg ONLINE 0 0 0 Update (10/31): I tried to export and re-import the array a few times over the past week and wasn't successful. First I tried: zpool import -f -R /tank -N -o readonly=on -F tank That produced this error immediately: cannot import 'tank': I/O error Destroy and re-create the pool from a backup source. I added the '-X' option to the above command to try to make it check the transaction log. I let that run for about 48 hours before giving up because it had completely locked up my machine (I was unable to log in locally or via the network). Now I'm trying a simple zpool import tank command and that seems to run for a while with no output. I'll leave it running overnight to see if it outputs anything.

    Read the article

  • Creating own Amazon Machine Image - Kernel panic

    - by amra
    I have created own AMI and registered it on Amazon EC2. But while AMI startup I receive following error: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1) The image is running locally without any problems. fstab contains: proc /proc proc defaults 0 0 /dev/sda1 / ext3 relatime,errors=remount-ro 0 1 thx for help

    Read the article

  • Weird nfs performance: 1 thread better than 8, 8 better than 2!

    - by Joe
    I'm trying to determine the cause of poor nfs performance between two Xen Virtual Machines (client & server) running on the same host. Specifically, the speed at which I can sequentially read a 1GB file on the client is much lower than what would be expected based on the measured network connection speed between the two VMs and the measured speed of reading the file directly on the server. The VMs are running Ubuntu 9.04 and the server is using the nfs-kernel-server package. According to various NFS tuning resources, changing the number of nfsd threads (in my case kernel threads) can affect performance. Usually this advice is framed in terms of increasing the number from the default of 8 on heavily-used servers. What I find in my current configuration: RPCNFSDCOUNT=8: (default): 13.5-30 seconds to cat a 1GB file on the client so 35-80MB/sec RPCNFSDCOUNT=16: 18s to cat the file 60MB/s RPCNFSDCOUNT=1: 8-9 seconds to cat the file (!!?!) 125MB/s RPCNFSDCOUNT=2: 87s to cat the file 12MB/s I should mention that the file I'm exporting is on a RevoDrive SSD mounted on the server using Xen's PCI-passthrough; on the server I can cat the file in under seconds ( 250MB/s). I am dropping caches on the client before each test. I don't really want to leave the server configured with just one thread as I'm guessing that won't work so well when there are multiple clients, but I might be misunderstanding how that works. I have repeated the tests a few times (changing the server config in between) and the results are fairly consistent. So my question is: why is the best performance with 1 thread? A few other things I have tried changing, to little or no effect: increasing the values of /proc/sys/net/ipv4/ipfrag_low_thresh and /proc/sys/net/ipv4/ipfrag_high_thresh to 512K, 1M from the default 192K,256K increasing the value of /proc/sys/net/core/rmem_default and /proc/sys/net/core/rmem_max to 1M from the default of 128K mounting with client options rsize=32768, wsize=32768 From the output of sar -d I understand that the actual read sizes going to the underlying device are rather small (<100 bytes) but this doesn't cause a problem when reading the file locally on the client. The RevoDrive actually exposes two "SATA" devices /dev/sda and /dev/sdb, then dmraid picks up a fakeRAID-0 striped across them which I have mounted to /mnt/ssd and then bind-mounted to /export/ssd. I've done local tests on my file using both locations and see the good performance mentioned above. If answers/comments ask for more details I will add them.

    Read the article

  • Trying to setup virtual hosts on unix PHP on nginx

    - by user1634653
    I have tried to install php5-fpm and Nginx on Ubuntu machine, but I got a problem. When I have only one virtual host on a unix port it is all fine but when I try to add another virtual host Nginx goes to default web page "Welcome to Nginx!" but when I run it on a tcp port example port 9000 it work fine with multisites. It is a fresh install of ubuntu 11.10, Nginx 1.2.3 with php5-fpm installed. It also has extra php installs such as php-apc. I can only give the links to the virtual hosts because I am doing it from a mobile phone. Here are the links for the two virtual hosts I am using: http://ic0nic.co.uk/ic0nic.txt, http://ic0nic.co.uk/sourproxy.txt also I want to use unix port because I find it a whole lot faster. Edit: Here are the nginx configs server { server_name ic0nic.co.uk www.ic0nic.co.uk; root /var/www/ic0nic.co.uk; listen 8080; index index.html index.htm index.php; include conf.d/drop; location / { try_files $uri $uri/ /index.php?q=$uri&$args; } location ~ \.php$ { fastcgi_buffers 8 256k; fastcgi_buffer_size 128k; fastcgi_intercept_errors on; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_pass unix:/dev/shm/php-fpm-www.sock; root /var/www/ic0nic.co.uk; } } server { server_name sourproxy.co.uk www.sourproxy.co.uk; root /var/www/sourproxy.co.uk/; listen 8080; index index.html index.htm index.php; include conf.d/drop; location / { try_files $uri $uri/ /index.php?q=$uri&$args; } location ~ \.php$ { fastcgi_buffers 8 256k; fastcgi_buffer_size 128k; fastcgi_intercept_errors on; include fastcgi_params; fastcgi_param SCRIPT_FILENAME /var/www/sourproxy.co.uk$fastcgi_script_name; fastcgi_pass unix:/dev/shm/php-fpm-www.sock; } }

    Read the article

  • How can I run the latest version of Chrome on Mac OS X?

    - by eagle
    In a bug post I sent to the chrome developers, a developer sent me the message: We don't see this difference in the new builds of Chrome. Checked in 6.0.437.2 dev. Can you check and confirm again? I'm wondering how can I run the latest (development) version of Chrome for Mac OS X? Ideally I don't want to build the project.

    Read the article

  • Using proxy server to redirect MySQL traffic to multiple servers using standard port?

    - by FrenchFry
    Is it possible to redirect MySQL (tcp) traffic to multiple servers based on domain name alone? Our DNS is setup to point several sub-domain aliases to one proxy machine. (running haproxy and iptables). We would like to redirect all database traffic through this proxy server and route it to the appropriate db server, WITHOUT deviating from the standard MySQL port. dev.domain1.com:3306 -- dbDevServer.domain1.com:3306 test.domain1.com:3306 -- dbTestServer.domain1.com:3306 prod.domain1.com:3306 -- dbProdServer.domain1.com:3306 Thanks!

    Read the article

  • Running localhost webapp projects under domain name using fiddler2

    - by user01
    I have a Tomcat server running on my local dev machine(running Windows8) & I use fiddler2 to assign an alias to localhost as my domain name (www.mydomainName.com), so my application webpages open in the browser like this: http://www.mydomainName.com/myAppName/welcome.html instead of http://localhost:8080/myAppName/welcome.html But I want to my webapp pages urls to omit 'myAppName' & be something like : http://www.mydomainName.com/welcome.html How could I configure to do this ?

    Read the article

  • My VPS ubuntu server is very slow

    - by askmike
    I just installed a frech copy of Ubuntu 12.04 on my vps because my old installation was very slow, unfortunately this did not fix the problem. With slow I mean requests for my PHP websites take a long time, very slow (30 sec per request) to slow (3+ sec per request). When it's really bad SSH is also laggish. The websites are: askmike.org (pretty standard Wordpress) mvr.me (own PHP) slow? very slow: Here is a picture of loading a clean install of wordpress slow: here is a picture of loading a small PHP based website the vps The VPS has 256mb ram and an 25GB hdd. Besides serving the 2 small websites it isn't doing anything AFAIK. What have I installed Clean Ubuntu server 12.04 LAMP stack few things like git and nodejs (not using both) ossec (because I thought my server was getting hammered) munin What I already tried / done I installed munin so that I could watch io speed and such. The problem is that I don't know where to look for in the munin report. I checked logs and don't see anything strange (although I don't really know where to look for besides strange / repetitive errors and GET requests). I configured Apache MPM to: <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 40 MaxRequestsPerChild 0 </IfModule> (apache is using prefork, the default) Stats I copied the munin report as it appeared at 4:50 last night to a site hosted on a shared webhost. Note that tonight my mysql crashed somewhere after 1:00 (which is a new problem altogether), so therefor the graph for last night might look strange. Can anyone help me get my VPS up to normal speed? EDIT: Thanks for the replies. The VPS is 10 bucks a month and is from directvps.nl (Dutch host and I'm also dutch). I did two speed tests for disk IO: $ dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync 1073741824 bytes (1.1 GB) copied, 23.1506 s, 46.4 MB/s $ dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync 1073741824 bytes (1.1 GB) copied, 39.3796 s, 27.3 MB/s Anyway: how can I prove to my VPS host that it is to slow? I can understand a server being busy slowing a website down. But 5-30 sec loadtime for a normal PHP webpage?

    Read the article

  • ec2-consistent-snapshot volume does not exist?

    - by mpaler
    Does anybody know why this might happen? me@ip-10-176-234-62:/$ ec2-describe-volumes VOLUME vol-994ec1fd 8 snap-2971f04d us-west-1a in-use 2012-05-14T18:57:01+0000 ATTACHMENT vol-994ec1fd i-a49a2ae2 /dev/sda1 attached 2012-08-31T18:39:18+0000 me@ip-10-176-234-62:/$ ec2-consistent-snapshot vol-994ec1fd --aws-access-key-id xxxx --aws-secret-access-key xxxxx ec2-consistent-snapshot: ERROR: The volume 'vol-994ec1fd' does not exist.

    Read the article

  • What else can I do to secure my Linux server?

    - by eric01
    I want to put a web application on my Linux server: I will first explain to you what the web app will do and then I will tell you what I did so far to secure my brand new Linux system. The app will be a classified ads website (like gumtree.co.uk) where users can sell their items, upload images, send to and receive emails from the admin. It will use SSL for some pages. I will need SSH. So far, what I did to secure my stock Ubuntu (latest version) is the following: NOTE: I probably did some things that will prevent the application from doing all its tasks, so please let me know of that. My machine's sole purpose will be hosting the website. (I put numbers as bullet points so you can refer to them more easily) 1) Firewall I installed Uncomplicated Firewall. Deny IN & OUT by default Rules: Allow IN & OUT: HTTP, IMAP, POP3, SMTP, SSH, UDP port 53 (DNS), UDP port 123 (SNTP), SSL, port 443 (the ones I didn't allow were FTP, NFS, Samba, VNC, CUPS) When I install MySQL & Apache, I will open up Port 3306 IN & OUT. 2) Secure the partition in /etc/fstab, I added the following line at the end: tmpfs /dev/shm tmpfs defaults,rw 0 0 Then in console: mount -o remount /dev/shm 3) Secure the kernel In the file /etc/sysctl.conf, there are a few different filters to uncomment. I didn't know which one was relevant to web app hosting. Which one should I activate? They are the following: A) Turn on Source Address Verification in all interfaces to prevent spoofing attacks B) Uncomment the next line to enable packet forwarding for IPv4 C) Uncomment the next line to enable packet forwarding for IPv6 D) Do no accept ICMP redirects (we are not a router) E) Accept ICMP redirects only for gateways listed in our default gateway list F) Do not send ICMP redirects G) Do not accept IP source route packets (we are not a router) H) Log Martian Packets 4) Configure the passwd file Replace "sh" by "false" for all accounts except user account and root. I also did it for the account called sshd. I am not sure whether it will prevent SSH connection (which I want to use) or if it's something else. 5) Configure the shadow file In the console: passwd -l to lock all accounts except user account. 6) Install rkhunter and chkrootkit 7) Install Bum Disabled those services: "High performance mail server", "unreadable (kerneloops)","unreadable (speech-dispatcher)","Restores DNS" (should this one stay on?) 8) Install Apparmor_profiles 9) Install clamav & freshclam (antivirus and update) What did I do wrong and what should I do more to secure this Linux machine? Thanks a lot in advance

    Read the article

  • File corruption (bad checksums) in large files copied to VMware guest

    - by AllanA
    In setting up a development lab, I've got a desktop system running ESXi 4.1.0 (free license) on SATA RAID 0 (already purchased and configured when I started this job; I'm open to hardware input as it pertains to my problem.) Its guests so far include two Win2008 Server R2 64-bit VMs and on Ubuntu 10.04 64-bit VM. I'm installing onto the Windows servers. We've been copying off some fairly large files (over a gigabyte) for an installation, hoping to install more quickly from a (virtual) hard drive than from the network for from BD-ROM. The problem is that they keep coming up with different checksums from the originals. The file sizes are the same, but md5sum reports different numbers (and so does the installer, as it refuses to continue when the checksums don't match.) I've tried copying directly from the BD-ROM (attaching the OS drive to the host system's physical drive). I've tried copying the large files onto a co-worker's Windows machine from his Blu-Ray drive; when I do that, the checksums match. But when I copy from his machine to the VM guest over a network share, the checksums no longer match. Thinking this meant a corrupt destination drive, I deleted it in vSphere and added another freshly created drive. The problem persists. I'm not sure what to try next.

    Read the article

  • How can I do a "Coming Soon" redirect on IIS6 for everyone except a couple specific IPs?

    - by colinodell
    We're about to do some major maintanence on an IIS 6 / ASP (Classic) website. We want all visitors to be redirected to a "Coming Soon" page (or something similar). This should NOT apply to our dev team (operating remotely), so we'd want to specify certain IPs that should have access to the under-construction site. How can this be accomplished in IIS 6? (Using classic ASP if needed)

    Read the article

  • Amazon S3 Iterating Through Multi-Page Results. (withMarker)

    - by Jitu
    Trying to iterate through AmazonS3 that has around 5000+ keys stored in the bucket, used sample code based on provided link on Amazon Developer Guide http://docs.amazonwebservices.com/AmazonS3/latest/dev/ListingObjectKeysUsingNetSDK.html Issue is iteration fails when NexMarker is passed which has length of more than 128 string characters, which seems unusal as withMarker accepts string as parameter and there is no documentation on limit to withMarker. request.Marker = response.NextMarker; Has anyone faced similar issue. Thanks in advance.

    Read the article

  • How can I login (send text) with minicom?

    - by Travis
    I am attempting to login from a Linux client to a set top box running Linux via a USB to serial cable. When I power on the device, I can see the init messages scroll past, and I get to the login prompt, like this: (none) login: but I cannot login. The cursor stops flashing as if it is receiving input, but there is no response. My serial port setup is: Device: /dev/ttyUSB0 Bps: 115200 8N1 Hardware Flow Control: Yes Software Flow Control: No Any help would be greatly appreciated!

    Read the article

  • Test and Production Server

    - by Mike Silvis
    I am using Git for a test and production server and I'm trying to figure out the best way to update the production server. I have limited SSH access, and don't want to manually update my production server using FTP. I essentially would like to just be able to run a simple command and have the whole production server files match my dev. It is also important to note that users will be uploading images, and other files to our production server only, that we can not lose. Thanks,any help is appreciated

    Read the article

  • How to install PHP in a new directory in Windows

    - by jasondavis
    I am using Xampp for a local dev server, I am trying to upgrade it so I can use the latest version of PHP. I had it installed in my c drive c:\webserver\php I just installed everything new in a new drive D d:\webserver\php I then boot everything up and then I run phpinfo() and it is still showing my old version of PHP and even points to the old php installation C:\webserver\php\php.ini Am I missing something obvious here?

    Read the article

  • Sharing a serial port between two processes

    - by peterrus
    As it is not possible to directly share a serial port between two processes using Linux, I am looking for another way to achieve this, I have heard about socat but could not find a concrete example of how to realize the following: Split one physical serial port (/dev/ttyUSB0) into two virtual ports, one for reading and one for writing, as one process only needs to send data, and one only needs to receive data. I can no modify the sending application unfortunately.

    Read the article

  • Automount vfat (w95 fat32 LBA) on Centos

    - by cpl
    I'm trying to mount an USB flash drive formatted as w95 fat32 LBA (as reported by dmesg) under Centos. I can easily mount it using the mount command: mount /dev/sdx1 /media/mydrive -t vfat But it seems that the system (Centos 6.3) cannot mount it automatically. It mounts all the other filesystem types automatically. I also installed fuse-ntfs and it correctly mounts NTFS drives. How can I enable automount for vfat partiotions too? Thanks

    Read the article

  • Alias a linked Server in SQL server management studio?

    - by absentmindeduk
    Hoping someone can help - is there a way in SQL server management studio 2008 R2 that I can alias a linked SQL server? I have a server, added by IP address, to which I do not have the login credentials - however as the connection is already setup I can login ok. Issue is that, this is a dev environment, prior to a live deployment and the IP I have as a linked server needs to be 'accessible' by my stored procs under a different name, eg 'myserver' not 192.168.xxx.xxx... Any help much appreciated.

    Read the article

  • Why is Linux choosing the wrong source ip address

    - by Scheintod
    and what to do to let it choose the right one? This all happens inside an OpenVZ container: The Host is Debian/Wheezy with Redhat/OpenVZ Kernel: root@mycl2:~# uname -a Linux mycl2 2.6.32-openvz-042stab081.5-amd64 #1 SMP Mon Sep 30 16:40:27 MSK 2013 x86_64 GNU/Linux The container has two (virtual) network interfaces. One in public and one in private address-space: root@mycl2:~# ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:127.0.0.2 P-t-P:127.0.0.2 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:475 errors:0 dropped:0 overruns:0 frame:0 TX packets:775 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:32059 (31.3 KiB) TX bytes:56309 (54.9 KiB) venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:80.123.123.29 P-t-P:80.123.123.29 Bcast:80.123.123.29 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 venet0:1 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.0.1.29 P-t-P:10.0.1.29 Bcast:10.0.1.29 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 The route to the private network is set manually: root@mycl2:~# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 venet0 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 venet0 Tring to ping others on the private network leads to the wrong source address been choosen: root@mycl2:~# ip route get 10.0.1.26 10.0.1.26 dev venet0 src 80.123.123.29 cache mtu 1500 advmss 1460 hoplimit 64 Why is this and what can I do about it? EDIT: If I create the route with (thanks to Joshua) ip route add 10.0.0.0/8 dev venet0 src 10.0.1.29 it is working. But according to man ip-route the src parameter should only set the source-ip if this route is chosen. But if this route is chosen then the source-ip would be that anyway.

    Read the article

< Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >