Search Results

Search found 10280 results on 412 pages for 'remote shutdown'.

Page 177/412 | < Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >

• Ubuntu not booting, recovery mode not loading

  - by TNC

  I have a dual-boot Ubuntu 11.10 and Windows 7 machine setup and last night I had to force shutdown Ubuntu during updates because it wasn't responding. Since then, Ubuntu will not boot up, only flashing a blank lit screen for a split second every couple of seconds. Booting in recovery mode does not help either, as it doesn't load at all. If anyone can help me diagnose what's wrong and figure out what to do, that would be greatly appreciated!

  Read the article

• FTP Load Balancer on EC2

  - by inakiabt

  I need an EC2 instance to balance all incoming FTP connections to a list of FTP servers (EC2 instances too). This list will be changed dynamically due to the load of the FTP servers (launch a new FTP server when the FTP servers are overloaded or shutdown a FTP server when the load is low). What you recommend? a FTP proxy? DNS server? Load balancer? Note: The FTP servers must support Passive Mode

  Read the article

• Unable to telnet out on port 25 on windows server 2008

  - by NickGPS

  Hi All, I just setup a Windows 2008 R2 server and am trying to get a basic mail server up and running so that I can send emails from my applications. I setup a virtual SMTP server in IIS6 and tried doing a local telnet to port 25, which seemed to work fine. There were no errors during this stage and I can see the mail message appear in the Queue folder. The problem is that mail never leaves the Queue folder. I then tried to telnet to a remote mail server on port 25 but couldn't connect:- telnet 209.85.227.27 25 Could not open connection to the host, on port 25: Connection failed) I checked my firewall and there is a default setting to allow all outgoing TCP traffic with no restriction. I even setup a specific rule for outgoing port 25 traffic but to no avail. I then ran a SmtpDiag.exe command .\SmtpDiag.exe [email protected] [email protected] and received the following output Searching for Exchange external DNS settings. Computer name is WIN-SERVERNAME. Failed to connect to the domain controller. Error: 8007054b Checking SOA for gmail.com. Checking external DNS servers. Checking internal DNS servers. SOA serial number match: Passed. Checking local domain records. Checking MX records using TCP: gmail.com. Checking MX records using UDP: gmail.com. Both TCP and UDP queries succeeded. Local DNS test passed. Checking remote domain records. Checking MX records using TCP: gmail.com. Checking MX records using UDP: gmail.com. Both TCP and UDP queries succeeded. Remote DNS test passed. Checking MX servers listed for [email protected]. Connecting to gmail-smtp-in.l.google.com [209.85.227.27] on port 25. Connecting to the server failed. Error: 10060 Failed to submit mail to gmail-smtp-in.l.google.com. Is there any other diagnostics I can do to figure out if it's my firewall or something else? I have removed antivirus to make sure that it wasn't causing the problem. Any ideas would be much appreciated.

  Read the article

• Taking over locked user sessions in XP

  - by hurfdurf

  What's the best way to allow an administrator access to a locked user XP session, preferably with a logged event? The goal is to allow admins to cleanly shutdown/save existing work when work needs to be done on the PC. I am aware of the various VNC software flavors, but that only works when the PC is unlocked. Resetting the user password on the DC doesn't work either since the unlock password is cached locally, which means you still have to log the user out and possibly lose work.

  Read the article

• Problems executing check_mysql plugin

  - by Brian

  I'm attempting to test out the check_mysql plugin for Nagios using the command line. It works great when I'm just checking localhost but when I try to specify a different server (using the -H argument) I keep getting the following error message: CRITICAL - Unable to connect to mysql://nagios_user@{remoteServerHostname}/ - Access denied for user 'nagios_user'@'{localServerHostName}' (using password: YES) It looks like it's trying to connect to the database using the localhost server even though I've specified a different host name. I've already set up this user on the remote database and they have correct permissions. I'm just trying to figure out why the script keeps inserting the localhost server name instead of the remote one.

  Read the article

• Amazon ELB and use of address / server names across multiple servers

  - by Stpn

  I am setting up Nginx servers behind the ELB. I set up so that api.app.com points to an ELB. I wonder which addresses I should use for remote connections, Nginx settings etc.. 1) For example, in Nginx: Should I do server { listen 80; #What is the right line here: # server_name <WWW.NAME.COM> OR <ec2-.....compute-1.amazonaws.com> OR <MLB-....amazonaws.com>?; passenger_enabled on; ..... } 2) I connect servers behind ELB to remote Postgres database. In Postgres settings should I open the ELB address (MLB-...amazonws.com) or to individual EC2 IPs?

  Read the article

• Is it possible to use WebMatrix with pure IIS?

  - by Mike Christensen

  I'd like to check out WebMatrix for publishing our site to IIS automatically (right now, I have to zip it up, copy it out, Remote Desktop into the server, unzip it, etc). However, every example I can find on how to setup WebMatrix involves Azure, or using a .publishsettings file that you'd get from your hosting provider. I'm curious if I can publish to a normal, every day IIS server running on Windows Server 2008. So far, all I've done to the IIS server is install Web Deploy, which I believe is the protocol that WebMatrix uses to publish. When I enter the Remote Site Settings screen, I select Enter settings. I select Web Deploy as the protocol, type in my NT domain credentials (I'm an Admin on that server). I put in the site URL for the Site Name and Destination URL. When I click Validate Connection, I get: Am I doing something wrong, or is this just not possible to do?

  Read the article

• Icinga/Nagios to ping different machine on local network

  - by feronovak

  I have 3 machines, all remote IPs and all of them running nsclient++ with remote and local IP addresses: 46.*.*.1/192.168.1.1 46.*.*.2/192.168.1.2 46.*.*.3/192.168.1.3 I want nagios/icinga to remotely ping other local machines to see whether VLAN is working correctly. Is there a way to tell nagios/icinga to use machine 192.168.1.1 and to ping 192.168.1.2 and 192.168.1.3 ? check_ping is pinging only machine defined in host_name from icinga server. Icinga is on completely different ip range 92.*.*.* Is there a way to do this to see VLAN workes fine?

  Read the article

• Access hamachi machines from iPad / iphone [closed]

  - by Yas

  Is it possible to access a remote desktop from the iPhone or iPad on hamachi.

  Read the article

• Rebasing a branch which is public

  - by Dror

  I'm failing to understand how to use git-rebase, and I consider the following example. Let's start a repository in ~/tmp/repo: $ git init Then add a file foo $ echo "hello world" > foo which is then added and committed: $ git add foo $ git commit -m "Added foo" Next, I started a remote repository. In ~/tmp/bare.git I ran $ git init --bare In order to link repo to bare.git I ran $ git remote add origin ../bare.git/ $ git push --set-upstream origin master Next, lets branch, add a file and set an upstream for the new branch b1: $ git checkout -b b1 $ echo "bar" > foo2 $ git add foo2 $ git commit -m "add foo2 in b1" $ git push --set-upstream origin b1 Now it is time to switch back to master and change something there: $ echo "change foo" > foo $ git commit -a -m "changed foo in master" $ git push At this point in master the file foo contain changed foo, while in b1 it is still hello world. Finally, I want to sync b1 with the progress made in master. $ git checkout b1 $ git fetch origin $ git rebase origin/master At this point git st returns: # On branch b1 # Your branch and 'origin/b1' have diverged, # and have 2 and 1 different commit each, respectively. # (use "git pull" to merge the remote branch into yours) # nothing to commit, working directory clean At this point the content of foo in the branch b1 is change foo as well. So what does this warning mean? I expected I should do a git push, git suggests to do git pull... According to this answer, this is more or less it, and in his comment @FrerichRaabe explicitly say that I don't need to do a pull. What's going on here? What is the danger, how should one proceed? How should the history be kept consistent? What is the interplay between the case described above and the following citation: Do not rebase commits that you have pushed to a public repository. taken from pro git book. I guess it is somehow related, and if not I would love to know why. What's the relation between the above scenario and the procedure I described in this post.

  Read the article

• Windows Home Server - Can't log in - A problem is preventing Windows from accurately checking the license for this computer. Error Code: 0x8007007e

  - by 1337ingDisorder

  Subject header pretty much covers it. I have a windows Home Server which can only be accessed through remote desktop. I could log in for ages, but for the past couple weeks I haven't been able to log in. As soon as I enter my username/password and click OK, I get an alert dialog stating the following: "A problem is preventing Windows from accurately checking the license for this computer. Error Code: 0x8007007e" When I click "Ok" (the only option) the dialog closes and my remote session closes. How can I get around this? I've tried powering down the machine and powering it back up. Same results.

  Read the article

• Secure, efficient, version-preserving, filename-hiding backup implemented in this way?

  - by barrycarter

  I tried writing a "perfect" backup program (below), but ran into problems (also below). Is there an efficient/working version of this?: Assumptions: you're backing up from 'local', which you own and has limited disk space to 'remote', which has infinite disk space and belongs to someone else, so you need encryption. Network bandwidth is finite. 'local' keeps a db of backed-up files w/ this data for each file: filename, including full path file's last modified time (mtime) sha1sum of file's unencrypted contents sha1sum of file's encrypted contents Given a list of files to backup (some perhaps already backed up), the program runs 'find' and gets the full path/mtime for each file (this is fairly efficient; conversely, computing the sha1sum of each file would NOT be efficient) The program discards files whose filename and mtime are in 'local' db. The program now computes the sha1sum of the (unencrypted contents of each remaining file. If the sha1sum matches one in 'local' db, we create a special entry in 'local' db that points this file/mtime to the file/mtime of the existing entry. Effectively, we're saying "we have a backup of this file's contents, but under another filename, so no need to back it up again". For each remaining file, we encrypt the file, take the sha1sum of the encrypted file's contents, rsync the file to its sha1sum. Example: if the file's encrypted sha1sum was da39a3ee5e6b4b0d3255bfef95601890afd80709, we'd rsync it to /some/path/da/39/a3/da39a3ee5e6b4b0d3255bfef95601890afd80709 on 'remote'. Once the step above succeeds, we add the file to the 'local' db. Note that we efficiently avoid computing sha1sums and encrypting unless absolutely necessary. Note: I don't specify encryption method: this would be user's choice. The problems: We must encrypt and backup 'local' db regularly. However, 'local' db grows quickly and rsync'ing encrypted files is inefficient, since a small change in 'local' db means a big change in the encrypted version of 'local' db. We create a file on 'remote' for each file on 'local', which is ugly and excessive. We query 'local' db frequently. Even w/ indexes, these queries are slow, since we're often making one query for each file. Would be nice to speed this up by batching queries or something. Probably other problems that I've now forgotten.

  Read the article

• Datacenter Backup Strategy

  - by EasyEcho

  What are common approaches to backup solutions in remote data centers? I am already familiar with general backup principals and have a very good backup strategy for our local data center but am having great difficulty extending it to a remote data center. We currently do a full backup on Friday, differential Mon - Thu, rotate offsite Friday morning ...rinse and repeat week after week. BTW, we use disks and have been very happy with this approach. We could buy a large storage server and backup everything to it, but this solution doesn't give you offsite. We could encrypt and upload to Amazon or some other online storage but that would take a large amount of time given the data and would be rather expensive paying for the bandwidth leaving the data center and receiving at amazon. We could drive to the data center every Friday and continue to rotate disks as we do now. But that just seems old fashion. What am I missing, are there better options?

  Read the article

• How to send a pipe with psexec?

  - by Pierre-Alain Vigeant

  I'm trying to execute a pipe on a remote server by using psexec. The command that I'm trying to execute is psexec \\servername DSQUERY USER -name *userpart* | DSGET USER -samid -display Currently, the | pipe symbol get executed locally which is not what is wanted (since dsget does not exist on my machine). I tried to use quote around the whole command psexec \\servername "DSQUERY USER -name *userpart* | DSGET USER -samid -display" but that resulted in psexec trying to run that whole quoted sentence as one executable, which obviously does not exist. How can I pass a pipe symbol to the remote server so that it can execute it?

  Read the article

• FTP Load Balancer

  - by inakiabt

  I need an EC2 instance to balance all incoming FTP connections to a list of FTP servers (EC2 instances too). This list will be changed dynamically due to the load of the FTP servers (launch a new FTP server when the FTP servers are overloaded or shutdown a FTP server when the load is low). What you recommend? a FTP proxy? DNS server? Load balancer? Note: The FTP servers must support Passive Mode

  Read the article

• TFTP PUT Failing Across Hosts

  - by Jason

  I have a TFTP server installed on a CentOS host. /etc/xinetd.d/tftp: service tftp { disable = no socket_type = dgram protocol = udp wait = yes user = root server = /usr/sbin/in.tftpd server_args = -c -s /var/lib/tftpboot per_source = 11 cps = 100 2 flags = IPv4 } If I try to PUT a file from a remote host to the host running the TFTP server, I get Transfer Timed Out - however, it does create the file in /var/lib/tftpboot but the file is empty. If I tftp from the tftp server to itself (localhost) and PUT a file, it works fine. I have verified that SELinux is disabled and IPTables are turned off. I can connect from the remote hosts with no issue - just seems to be the PUT I have issue with: [root@SVR01 TEST]# tftp 10.100.2.15 tftp> status Connected to 10.100.2.15. Mode: netascii Verbose: off Tracing: off Literal: off Rexmt-interval: 5 seconds, Max-timeout: 25 seconds tftp>

  Read the article

• Executing EXE with wildcard from psexec

  - by Danny

  I'm writing a few scripts that I am using to integrate with bamboo for some continuous integration improvements and I've run into a bit of a snag. I'm currently trying to run a psexec command that installs the latest build on the remote machine but I dont necessary know the revision number. For example, the remote exe file could be Installer-3.1.xxxxx.exe where the xxxxx changes. I tried running the command with Installer-3.1.*.exe but it takes it as literal in Windows. I'm not overly familiar with Windows command prompt and am more used to Linux at this moment.

  Read the article

• Want to SASL/TLS authentication

  - by Naval

  I want to send mail from remote client from my server(centos 5 and 64 bit) for this i need to sasl auth but i have no idea about it what changes i have to make in my server and client here I want to make things more clear my server's hostname/Ip is = test02.s80.in/176.67.172.209 now i want to authenticat remote client vps2.smail.info and vps1.smail.info to deliver mail .. so plz help me if any systematic way to do sasl/tls authentication for these clients... i am using DNS load-balancing(round-robin) mx record lookup technique for load balancing..

  Read the article

• cygWin connect by SSH using RSA key; ssh.exe couldn't create /home/user/.ssh

  - by Kirzilla

  I'm using Win XP and I'm trying to connect by SSH to remote host using RSA key. I've investigated that cygWin recognizes Documents and Settings dir as home directory Z:\app\cwRsync\bin>cygpath -H /cygdrive/c/Documents and Settings I've created .ssh directory in Documents and Settings/user/.ssh and moved known_hosts, id_rsa, id_rsa.pub there. Now, I'm trying to connect via ssh.exe to remote host Z:\app\cwRsync\bin>ssh -p 22 [email protected] Could not create directory '/home/user/.ssh'. The authenticity of host '[remotehost.com]:22 ([remotehost.com]:22)' can't be established. RSA key fingerprint is f7:f4:2c:e0:c6:7e:d2:a4:45:70:63:df:bf:f2:84:46. Are you sure you want to continue connecting (yes/no)? What I'm doing wrong? Why ssh.exe couldn't create directory /home/user/.ssh? Thank you.

  Read the article

• Windows Server 2008 R2 loses ability to connect to network share

  - by JamesB

  I could sure use some help with this one: I've got two Windows Server 2008 R2 x64 Terminal Servers, as well as several 2003 servers (DNS / Wins / AD / DC). On the two 2008 boxes, every now and then they will get in this mode where you can't map a drive to a random server. I say random server because it's not always the same server that you can't map to. Here is a summary of what I can and can't do: net view \\servername Sometimes this works, sometimes it does not. net view \\FQDN This always works. net view \\IPAddress This always works. ping servername Sometimes this works, sometimes it does not. ping FQDN This always works. ping IPAddress This always works. I've been looking all over for a solution to this. It sure seems like Microsoft would have a hotfix by now. The kicker to this is that it sometimes works great, especially after a reboot. It may run for 2 weeks just fine, but all of a sudden it will fail to resolve the remote server name. It will then be this way for a few days, then it might start working again. Also, while it's in the mode of not working, the other servers have no problem getting there. It's just these 2008 R2 Terminal Servers. Setting a static entry in the Hosts file and LMHosts does not make it work. All servers have static IPs and they are registered in DNS and Wins just fine. Here is a long thread on MS Technet of the exact same problem, but they don't have a good solution. Here is their workaround (It was from June of 2010): Good news - a hotfix is in the works and a workaround has been identified: Root cause is that since this is SMB1 all user sessions are on a single TCP connection to the remote server. The first user to initiate a connection to the remote SMB server has their logon-ID added to the structure defining the connection. If that user logs off all subsequent uses of that TCP session fail as the logon-id is no longer valid. As a workaround for now to keep the issue from happening you will want to have the user not logoff the Terminal Server only disconnect their sessions. Any word from anyone out there about a solution? Any help would sure be appreciated. Thanks, James

  Read the article

• Limit number of simultaneous connections squid makes to a single server

  - by Ben Voigt

  Note: I am asking about outbound concurrent connection limits, not inbound, which is sufficiently covered on existing questions Modern browsers typically open a large number of simultaneous connections, to take advantage of the fact that TCP fairly shares bandwidth between connections. Of course, this doesn't result in fair sharing between users, so some servers have started penalizing hosts which open too many connections. This limit can be configured client-side (e.g. IE MaxConnectionsPerServer, Firefox network.http.max-connections-per-server), but the method differs for each browser and version, and many users aren't competent to adjust it themselves. So we turn to a squid transparent HTTP proxy for central management of HTTP download. How can the number of simultaneous connections from squid to a remote webserver be limited, so the webserver doesn't perceive it as abuse of concurrent connections? Ideally the limit would be per source address. Squid should accept virtually unlimited concurrent requests from the client browser, and issue them sequentially to the remote server, only N at a time, delaying (but not dropping) the others.

  Read the article

• How to access remotly to a mysql server?

  - by ÉricP

  Hi, I'm trying to access my remote mysql server from my own computer. I uncommented: bind-address = 80.10.65.45 I added 80.10.65.45 as a server in privilege root 80.10.65.45 yes ALL PRIVILEGES yes I'm using Sequel Pro on MacosX to connect via SSH here is the debug log: debug1: Authentication succeeded (password). debug1: Local connections to LOCALHOST:58517 forwarded to remote address 127.0.0.1:3306 debug1: Local forwarding listening on ::1 port 58517. debug1: channel 0: new [port listener] debug1: Local forwarding listening on 127.0.0.1 port 58517. debug1: channel 1: new [port listener] debug1: Entering interactive session. debug1: Connection to port 58517 forwarding to 127.0.0.1 port 3306 requested. debug1: channel 2: new [direct-tcpip] channel 2: open failed: connect failed: Connection refused debug1: channel 2: free: direct-tcpip: listening port 58517 for 127.0.0.1 port 3306, connect from 127.0.0.1 port 58519, nchannels 3

  Read the article

• Netgear VPN can't access specific server

  - by Critologist

  I have a Netgear FVS318N configured with a VPN. I'm trying to access my call recorder with the provided software from another office. I've already setup the VPN connection, and it works. I can connect and ping the remote router and a few other things on the network. However, I can't ping or connect to my call recorder. If I move outside of the office network (i.e. connect directly to the cable modem or via a mobile hotspot), I can connect and ping the call recorder just fine. The office has a simple Linksys WRT54G router and is using AT&T Uverse. The remote location is using Charter Cable with a Netgear FVS318N. Has anyone ever encountered anything like this before? I've setup an identical VPN previously for a different client using similar hardware and never encountered this. Thanks in advance!

  Read the article

• Is there a command line interface to the Drobo tools in Windows?

  - by Pridkett

  Before powering down the Drobo and removing it you're supposed to use the "shutdown" functionality from the Drobo Dashboard. Is there a way to call this from the command line so it can be included in a script?

  Read the article

• rsync osx to linux

  - by Nick

  I did a backup to a remote nfs folder with rsync, from a MAC to a Remote Debian. The final backup is 58GB less than the original. Rsync says that everything was OK, and nothing to update. Macintosh:/Volumes/Data1 root# du -sh Produccion/ 319G Produccion/ root@Disketera:/mnt/soho_storage/samba/shares# du -sh Produccion/ 260G Produccion/ can I trust in rsync? I'm using rsync -av --stats /Volumes/Data1/Produccion/ /mnt/red/ (/mnt/red is my samba mountpoint) Some differents folders root@Disketera:/mnt/soho_storage/samba/shares/Produccion/tiposok# du -sh * 0 IndoSanBol 0 IndoSans-Bold 0 IndoSans-Italic 0 IndoSans-Light 0 IndoSans-Regular 40K PalatinoLTStd-Black.otf 40K PalatinoLTStd-BlackItalic.otf 40K PalatinoLTStd-Bold.otf 44K PalatinoLTStd-BoldItalic.otf 44K PalatinoLTStd-Italic.otf 40K PalatinoLTStd-Light.otf 40K PalatinoLTStd-LightItalic.otf 40K PalatinoLTStd-Medium.otf 40K PalatinoLTStd-MediumItalic.otf 56K PalatinoLTStd-Roman.otf 12K TCL IndoSans_mac Macintosh:/Volumes/Data1/Produccion/tiposok root# du -sh * 36K IndoSanBol 40K IndoSans-Bold 36K IndoSans-Italic 36K IndoSans-Light 36K IndoSans-Regular 40K PalatinoLTStd-Black.otf 40K PalatinoLTStd-BlackItalic.otf 40K PalatinoLTStd-Bold.otf 44K PalatinoLTStd-BoldItalic.otf 44K PalatinoLTStd-Italic.otf 40K PalatinoLTStd-Light.otf 40K PalatinoLTStd-LightItalic.otf 40K PalatinoLTStd-Medium.otf 40K PalatinoLTStd-MediumItalic.otf 56K PalatinoLTStd-Roman.otf 160K TCL IndoSans_mac

  Read the article

< Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >