Search Results

Search found 8173 results on 327 pages for 'front panel'.

Page 178/327 | < Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >

  • How to factory reset an EPSON Stylus Photo 1290 printer?

    - by Harry Wood
    How do I do factory reset on an EPSON Stylus Photo 1290 printer? The printer is refusing to work. It seems to be in some error state. I've tried re-installing drivers etc, but the printer itself seems to run some diagnostic routine when I switch it on, but will not do anything else. It will not move the carousel ready for me to change the printer cartridge or any other Is there'e some sequence of button presses on the printer to do a factory reset? The printer has three buttons on the front, plus a yellow button when the hood is open (as shown in this photo)

    Read the article

  • Connecting a print/file server with no wired access

    - by PeanutsMonkey
    We currently have a printer server which also serves as a file server. The server is located on premise however is not close to any wired access point i.e. a patch panel or point. The server also requires access to the Internet as it transmits files across. We have a wireless modem and a wireless router. I can run a cable between the server and wireless router. How can I have the wireless router communicate with the wireless modem? If the operating system of the server is concerned, it is running Windows Server 2003.

    Read the article

  • Visual Studio 2010 Graphic Artifacts

    - by jonathan
    This problem started happening to me once I installed SP1 onto my Windows 7 Ultimate install. When changing between tabs, or even just hovering my mouse over buttons, VS2010 starts artifacting. It's bad enough where I often times can't see any of the code I'm working on. Sometimes just the button the mouse is over will go black, and other times the entire code panel will turn a black and grey pattern. This problem only happens with Visual Studio 2010 (2008 works fine). The problem remained when I upgraded Visual Studio to SP1. I've also uninstalled and reinstalled Visual Studio and the graphics drivers several times now, and I'm about ready to reinstall Windows 7, but I figured I'd ask for suggestions first. Google, as well as searching through Stack Exchange, did not turn up anything useful.

    Read the article

  • vmware workstation - virtual network adapters missing from ipconfig, still show in networking (XP host)

    - by Adam
    Hi Folks - here's a new one for me, and my first time posting here: I installed VMWare workstation 7.1 on a new PC. VMWare properly installs the virtual network adapters under the Network Connections control panel, however for some reason they do not show up under ipconfig, which is very weird. They also don't appear anywhere in "route print". I don't have network connectivity to the VM. My guesses are perhaps some conflict with Symantec AntiVirus or Symantec Client Firewall. Tried the following things: enabling TCP/IP in the virtual network adapters (they often get installed with it disabled for some reason) Restoring defualts in the VMnetcfg gui tool (this causes an uninstall and reinstall of the virtual network adapters on the host) Re-installing vmware workstation Uninstalling checkpoint secureremote and then reinstalling vmware Just to be clear, this problem is totally on the host. In my searching for stuff about (non-vmware) adapters missing from ipconfig, I see some posts about resetting the TCP/IP stack using netsh. Looking into that next... Thanks!

    Read the article

  • unable to connect to remote sql server from SHDSL router

    - by user529265
    Got a new leased line network to our office that came with a SHDSL router (Watson). Currently, we are unable to use Sql Server management studio to connect to remote Sql databases. It errors out saying A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: TCP Provider, error: 0 - The specified network name is no longer available.) (Microsoft SQL Server, Error: 64) I logged into the Watson management panel and unblocked all the ports for TCP traffic (specified the range as 0 to 60000 and UDP as well - this include 1443 required for connecting to SQL Server). The router is the only thing that has changed. We are able to connect to it from other networks just fine. Is there something we are missing here. Any help would be greatly appreciated.

    Read the article

  • Mouse wheel does not work in Excel 2007

    - by Chris Noe
    I am running Office 2007 on Windows XP-SP3. My mouse wheel works fine in other applications, meaning that it scrolls information up and down when the mouse is positioned over a given panel. It's even working fine in the other Office 2007 apps, so this is not a hardware or driver problem. It doesn't help to click on a cell to give the worksheet focus. I've tried various Advanced options that people recommend, to no avail: Allow editing directly in cell Zoom on roll with IntelliMouse What the heck, has Microsoft disabled this most useful functionality?

    Read the article

  • Can a custom DPI setting be applied to Remote Desktop sessions?

    - by sejong
    Can a custom DPI setting be applied to Remote Desktop sessions? When you try to change the DPI from a Remote Desktop session, you get a message that display settings can't be changed from a remote session. That made me think that changing DPI from a console setting would work. It did, sort of. If I connected via Remote Desktop to an existing console session with a custom DPI setting, that setting would be applied to the Remote Desktop session. However, if I logged off that session, the custom DPI would not be applied to subsequent Remote Desktop sessions even though it was maintained for subsequent console sessions. It looks like the registry value HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics\AppliedDPI (and perhaps other values) is overwritten at logon, but I haven't been able figure out how to prevent it.

    Read the article

  • Has anyone tried the "Secret LCD Monitor" hack? [closed]

    - by cornjuliox
    I'm genuinely curious to know, has anyone tried this hack? I can get LCD monitors for cheap at a place near where I live, and I'd like to try it myself, but I'd like to get more info on it before I do so to increase my chances of success. I'm looking for more info on the entire process, especially about any solvents I can use should I run into any glue problems. Questions for anyone that HAS tried it: Does it actually work, or is this some gag? If it works, is there any decrease in image quality or viewing angles? Since the polarization filters are essentially stuck to glasses, does that mean you're going to have to sit directly in front of the monitor at all times, and any shift in your position means that you won't be able to see the image? Does it improve/worsen ghosting or other LCD artifacts? Are there any problems with eye strain?

    Read the article

  • spurious hardware memory 'errors' on hp dl380 g5's being generated

    - by friedchicken
    Hi All, i've got 2 new HP dl380g5 servers running HP's esxi4 patched to 219382. they have both been patched up to the latest hp firmware levels (firmware cd 8.7) both are running 32gb (4 x 8gb sticks) both servers are showing the same symptoms - the memory lights come on for two (random) dimms on the front of the server and the health led turns red. sometimes the server stays up and running with no problems. othertimes the server locks dead and only a power reset can bring it back. there is nothing showing in the ilo logs and nothing within the vmware hardware monitoring. the memory has been replaced i've got other customers that have been running dl380g5's with out any issues on esx3.5 - this is our first vsphere deployment with them. these are meant to go live soon so any advice would be great. thanks in advance.

    Read the article

  • Belarc Advisor (Store Passwords using Reversible Encryption)

    - by Steve
    Hi, I'm using Belarc Advisor to examine my PC. Part of BA is a security benchmark summary, which examines components of windows security and provides a benchmark rating. Two items are marked as Fail: - Store Passwords using Reversible Encryption - Password History Size I have opened the Local Security Settings tool from the Control Panel Administrative Tools, and ensured that the "Store passwords using reversible encryption" setting is enabled. Also, I've set the password history to a number. So I'm a bit miffed about the Fail marks. Any idea why the Fail marks appear? Any clues how I can Pass them? Thanks, Steve.

    Read the article

  • Setting hidden input value in Javascript, then accessing it in c# codebehind

    - by Siegesmith
    Thank you for reading my question. I have been trying to set the value of a hidden input by using Javascript and then access the value from within my C# codebehind. When I run the code that is copied below, the value that is assigned to assignedIDs is "", which I assume is the default value for a hidden input. If I manually set the value in the html tag, then assignedIDs is set to that value. This behavior suggests to me that the value of the input is being reset (re-rendered?) between the onClientClick and onClick events firing. I would appreciate any help with the matter. I have spent hours trying to solve what seems like a very simple problem. html/javascript: <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title>Admin Page - Manage Tasks</title> <script language="javascript" type="text/javascript"> function PopulateAssignedIDHiddenInput() { var source = document.getElementById('assignedLinguistListBox'); var s = ""; var count = source.length; for (var i = count - 1; i >= 0; i--) { var item = source.options[i]; if (s == "") { s = source.options[i].value; } else { s = s.concat(",",source.options[i].value); } } document.getElementById('assignedIDHiddenInput').Value = s; // I have confirmed that, at this point, the value of // the hidden input is set properly } </script> </head> <body> <form id="form1" runat="server"> <div> <asp:Panel id="EditMode" runat="server"> <table style="border: none;"> <tr> <td> <asp:Label ID="availableLinguistLabel" runat="server" Text="Available"></asp:Label><br /> <asp:ListBox ID="availableLinguistListBox" runat="server" Rows="10" SelectionMode="Multiple"></asp:ListBox> </td> <td> <input type="button" name="right" value="&gt;&gt;" onclick="Javascript:MoveItem('availableLinguistListBox', 'assignedLinguistListBox');" /><br /><br /> <input type="button" name="left" value="&lt;&lt;" onclick="Javascript:MoveItem('assignedLinguistListBox', 'availableLinguistListBox');" /> </td> <td> <asp:Label ID="assignedLinguistLabel" runat="server" Text="Assigned To"></asp:Label><br /> <asp:ListBox ID="assignedLinguistListBox" runat="server" Rows="10" SelectionMode="Multiple"></asp:ListBox> </td> </tr> </table> //-snip- <asp:Button ID="save_task_changes_button" runat="server" ToolTip="Click to save changes to task" Text="Save Changes" OnClick="save_task_changes_button_click" OnClientClick="Javascript:PopulateAssignedIDHiddenInput()" /> </asp:Panel> <!-- Hidden Inputs --> <!-- Note that I have also tried setting runat="server" with no change --> <input id="assignedIDHiddenInput" name="assignedIDHiddenInput" type="hidden" /> </div> </form> </body> c# protected void save_task_changes_button_click(object sender, EventArgs e) { string assignedIDs = Request.Form["assignedIDHiddenInput"]; // Here, assignedIDs == ""; also, Request.Params["assignedIDHiddenInput"] == "" // -snip- }

    Read the article

  • Server not responding to SSH and HTTP but ping works

    - by yes123
    Hello guys, I requested an hard reboot because none of ssh and http worked. Ping worked normally. Which logs should i check to understand what was the problem? Thanks! (debian 6 on lamp) Edit: my memory and swap: Mem: 4040068k total, 1114920k used, 2925148k free, 109212k buffers Swap: 1051384k total, 0k used, 1051384k free, 283820k cached 4 GB ram (and more than 1TB of HDD) The cause is from 2 days ago: look how the usage of swap goes +60% in less than 10hours My control panel reports this as top 5 memory usage process: If every apache2 process is 190MB large that sux because IF i do TOP i have 262 sleeping process most of them are apache2! My apache mpm_prefork settings are: <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 ServerLimit 1500 MaxClients 1500 MaxRequestsPerChild 2000 </IfModule> KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 4

    Read the article

  • Reverse Proxy (mod_rewrite) and Rails (absolute paths)

    - by SooDesuNe
    I have front end rails app, that reverse proxies to any of a number of backend rails apps depending on URL, for example http://www.my_host.com/app_one reverse proxies to http://www.remote_host_running_app_one.com such that a URL like http://www.my_host.com/app_one/users will display the contents of http://www.remote_host_running_app_one.com/users I have a large, and ever expanding number of backends, so they can not be explicitly listed anywhere other than a database. This is no problem for mod_rewrite using a prg:/ rewrite map reverse proxy. The question is, the urls returned by rails helpers have the form /controller/action making them absolute to the root. This is a problem for the page served by mod_rewrite because links on the proxied page appear as absolute to the domain. i.e.: http://www.my_host.com/app_one/controller/action has links that end up looking like /controller/action/ when they need to look like /app_one/controller/action mod_proxy_html seems like the right idea, but it doesn't seem to be as dynamic as I would need, since the rules need to be hard coded into the config files. Is there a way to fix this server-side, so that the links will be routed correctly?

    Read the article

  • Has ec2 made self-hosting possible for 'amateur' sysadmins possible?

    - by Blankman
    I'm a developer, and it seems ec2 has made it possible for a amateur sysadmin like me to setup and maintain a fairly large set of servers. Now I don't mean to undermine real sys admins, as I know the value of them but what I am trying to get at is that someone like me can setup and maintain a cluster of servers (front end web servers, with some db servers) using tools like ec2 and capistrano with the help of google. Now this isn't something I would do as a long term thing, but as a startup, one-man operation, I think I can pull this off until business takes off and I can hire this important role out. With ec2, I get my firewall, so I basically open up port 80 on my public facing server, which will run haproxy and route requests to my cluster of servers. Ofcourse I am simplifying the setup, but just want a feel for what you guys think about my perception. My application is a web application, that will be runing Ruby on rails (passenger) and talking to mysql or postgresql.

    Read the article

  • Corrupted network from ipad

    - by lisa
    All wireless clients were kicked off the network (3 PCs & 1 iPad). Only a PC with a wired connection was still able to connect. This morning I discovered that the network had been renamed and a new password had been assigned. Via Linksys Updater I gave a new password. Strangely, in my Windows Control Panel/Network connections our old password now exists as an unsecured network, that I cannot delete! When I attempt to connect using this bastard network, I get an Apple Push error. Linksys WRT610N PCs all using Windows 7 (wired & wireless) iPad 2

    Read the article

  • DVI-D Splitter Not Working with GeForce 8400gs

    - by jimdrang
    I have a GeForce 8400gs and it has a DVI and VGA port on the back. I was using dual monitors with one VGA and one DVI cable. I wanted both displays to be digital so I bought a DVI-D splitter and put one DVI cable in each monitor, connected them to the splitter and put the single merged connection in the back of the cards DVI connection. It will not recognize the second monitor (I'm not even sure how it determined which one was the first monitor). The tech specs state that it supports "Two dual-link DVI outputs for digital flat panel display resolutions up to 2560x1600" http://www.nvidia.com/object/geforce_8400_tech_specs.html. Do I need a different converter or is my only option for dual monitors with this card one VGA, one DVI?

    Read the article

  • my domain.com is pointing to two different IP addresses

    - by user43726
    Initially my domain , mycompany.com points to this IP: - 123.456.789.101 (sample only) Then i got another VPS and then decided to move the mycompany.com into this new IP/Host: - 987-654-123.123 (sample only) I changed the necessary stuff like DNS, etc. from my domain management panel. But when i ping it : ping mycompany.com , sometimes it gives the first IP, sometimes the second one. Also when i visit the url from the browser, sometimes it loads, sometimes it doesn't. How can i solve this? Please help. Thanks

    Read the article

  • Server goes offline. What to look for?

    - by Jonathan Sampson
    I'm using a new virtual server through GoDaddy, and this morning I received a call from the powers that be informing me our website was offline. After confirming this, I requested a power cycle through our GoDaddy control panel, and within a minute or two the server was back online. I made the call, and reported the news that we're back up. Of course, a couple minutes later we're down again. I tried connecting through PuTTy, and it takes forever to prompt me for a username, and each successive prompt takes a long time to come up. I'm using CentOS. So my questions are: How can I determine the cause? What types of things can I do to prevent this in the future? One interesting, and perhaps relevant, observation is that yesterday our bandwidth consumption was about 20% greater than our top figures from the past month.

    Read the article

  • HTTP, HTTPS and FTP is not working but SMTP and IMAP are working.

    - by nWorx
    Yesterday on a computer of a friend a strange thing happened. after booting the ports fo http, https and ftp are closed but e-mail is still working. in the control panel the windows firewall seems active even if he tries to deactivate it. I have a suspision that it is the faul of norton internet security 2010, we have tried to uninstall it, but the uninstallation did not work. when using the removal tool from symantec it just goes to 23% and then it crashes. the process ccSvcHst.exe is still running. How can I safely remove the rest of Norton Internet Security? Edit: Norton Internet Security 2010 is sucesfully removed, but still no connectivity...

    Read the article

  • Best way to deploy my node.js app on a Varnish/Nginx server

    - by Saif Bechan
    I am about to deploy a brand new node.js application, and I need some help setting this up. The way my setup is right now is as follows. I have Varnish running on external_ip:80 I have Nginx behind running on internal_ip:80 Both are listening on port 80, one internal port, one external. NOTE: the node.js app runs on WebSockets Now I have the my new node.js application that will listen on port 8080. Can I have varnish set up that it is in front of both nginx and node.js. Varnish has to proxy the websocket to port 8080, but then the static files such as css, js, etc has to go trough port 80 to nignx. Nginx does not support websockets out of the box, else I would so a setup like: varnish - nignx - node.js

    Read the article

  • embedded tomcat 7 behind iis 7.5 proxy ssl problems

    - by user1058410
    I'm using embedded tomcat 7 behind a iis 7.5 proxy server, with requests being forwarded to tomcat with arr. Everything works fine unless iis is set to require ssl. Then things like links that are generated dynamically in .jsp files on tomcat don't work right. For example if a link is supposed to point to _https://somewhere.com:443 it will be wrote as _http://somewhere.com:8080 (8080 is the port tomcat is running on). The problem seems to come from when tomcat looks at itself to build out the url it sees correctly that it is running on _http://somewhere.com:8080, but i need it to think otherwise. Does anybody know how to accomplish this without using ssl between iis and tomcat? Sorry for the underscores in front of the imaginary urls.

    Read the article

  • osx 10.6 dhcp client-id option

    - by Clustermagnet
    Trying to join a osx machine on a dhcp network which forces certain client IDs. Even if I was to modify the client-id via the network properties, the DHCP server is not accepting this request, since Windows and Apple send this via different options You can set the ClassID in the Network Control Panel in the DHCP Client ID box. The trick lies in setting up your DHCP server to recognize it. Windows XP sends the DHCP class ID via DHCP option 77, and OS X sends it via option 61. You'll have to set your DHCP server to check for option 61, +with an offset of 1 and a length of 9+. That's the tricky bit. So, without modifying the DHCP server... (which does not belong to me), is there anything that can be done on OSX to modify the client-id option to be 77?

    Read the article

  • Vista: "Change date and time" causes permissions error

    - by alexsome
    I double-click on the time in the bottom right to open the date and time panel. Then I click on the "Change date and time..." button (which has a shield) and I get the UAC dialog. I click "Continue", then am presented with an error that reads: Unable to continue You do not have permission to perform this task. Please contact your computer administrator for help. I will mention I have Comodo installed, but I have turned it off to test this out and I get the same results. All that I've found while googling were suggestions to turn UAC off, but I am interested in learning what the actual problem is. Thanks in advance.

    Read the article

  • Asus Eee replacement netbook monitor doesn't fit connector

    - by Michael Morisy
    I bought a replacement screen for an Asus Eee netbook 1005HA from a company that said the screen they were selling was compatible, but the connector on the replacement is smaller than the original. I've scoured the net for instructions, but so far, I'm out of luck. As far as I can tell, they both have 32 pins, but maybe I'm missing a connector? The replacement is a [LG Philips 10.1 inchs Glossy LED Panel Screen][1]. Picture of two connectors I couldn't include due to low rep. The replacement is on the left.

    Read the article

  • Network Block Device (NBD) clients for Windows or similar solutions

    - by przemoc
    Are there any NBD clients for Windows? Strangely, I cannot find any, or I am searching for them in a wrong way. Such client should be possibly a driver with front-end tool (may be a command-line one) allowing to create virtual drives and associate them with given hosts (or simply localhost) and ports where NBD servers are listening. From user perspective virtual drive should be close to what physical drive is, so it should be accessible as something like \\.\PhysicalDriveX (maybe \\.\VirtualDriveX?), be visible in Disk Management (diskmgmt.msc) and mountvol tools at least. (The only thing I found remotely close to NBD on Windows is ImDisk's proxy mode and companion tool devio, but AFAIK ImDisk only works at partition level (so no virtual drive) and devio uses different protocol.) Secondary question is: Are there any (preferably simple) Windows-specific solutions allowing creation of virtual drive delegating read/write request to user-space via some explicit way (like via TCP, IPC, DLL implementing given API, etc.)?

    Read the article

< Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >