Search Results

Search found 6357 results on 255 pages for 'generic relations'.

Page 178/255 | < Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >

  • USB drives not recognized all of a sudden (module usb_storage not loading)

    - by Siddharth
    I am very close to the solution, just need to know how to get usb-storage to load I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. sudo lsusb results Bus.... skipped 4 lines Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 sudo dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Edit : jsiddharth@siddharth-desktop:~$ sudo udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing UDEV [4757.144372] add /module/usb_storage (module) UDEV [4757.146558] remove /module/usb_storage (module) UDEV [4757.148707] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6 (usb) UDEV [4757.149699] add /bus/usb/drivers/usb-storage (drivers) UDEV [4757.151214] remove /bus/usb/drivers/usb-storage (drivers) UDEV [4757.156873] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0 (usb) UDEV [4757.160903] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) UDEV [4757.164672] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165163] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165440] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) Narrowing down more : Seems like I need usb_storage to load as a module jsiddharth@siddharth-desktop:~$ lsmod | grep usb usbserial 37201 0 usbhid 41937 0 hid 77428 1 usbhid Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful.

    Read the article

  • openssl/rand.h header file not found

    - by Arun Reddy Kandoor
    I have installed libssl-dev package but that did not install the include files. How do I get the openssl include files? Appreciate your help. Checking for program g++ or c++ : /usr/bin/g++ Checking for program cpp : /usr/bin/cpp Checking for program ar : /usr/bin/ar Checking for program ranlib : /usr/bin/ranlib Checking for g++ : ok Checking for node path : ok /usr/bin/node Checking for node prefix : ok /usr Checking for header openssl/rand.h : not found /home/arun/Documents/webserver/node_modules/bcrypt/wscript:30: error: the configuration failed (see '/home/arun/Documents/webserver/node_modules/bcrypt/build/config.log') npm ERR! error installing [email protected] npm ERR! [email protected] preinstall: `node-waf clean || (exit 0); node-waf configure build` npm ERR! `sh "-c" "node-waf clean || (exit 0); node-waf configure build"` failed with 1 npm ERR! npm ERR! Failed at the [email protected] preinstall script. npm ERR! This is most likely a problem with the bcrypt package, npm ERR! not with npm itself. npm ERR! Tell the author that this fails on your system: npm ERR! node-waf clean || (exit 0); node-waf configure build npm ERR! You can get their info via: npm ERR! npm owner ls bcrypt npm ERR! There is likely additional logging output above. npm ERR! npm ERR! System Linux 3.8.0-32-generic npm ERR! command "node" "/usr/bin/npm" "install" npm ERR! cwd /home/arun/Documents/webserver npm ERR! node -v v0.6.12 npm ERR! npm -v 1.1.4 npm ERR! code ELIFECYCLE npm ERR! message [email protected] preinstall: `node-waf clean || (exit 0); node-waf configure build` npm ERR! message `sh "-c" "node-waf clean || (exit 0); node-waf configure build"` failed with 1 npm ERR! errno {} npm ERR! npm ERR! Additional logging details can be found in: npm ERR! /home/arun/Documents/webserver/npm-debug.log npm not ok

    Read the article

  • How to design a scalable notification system?

    - by Trent
    I need to write a notification system manager. Here is my requirements: I need to be able to send a Notification on different platforms, which may be totally different (for exemple, I need to be able to send either an SMS or an E-mail). Sometimes the notification may be the same for all recipients for a given platform, but sometimes it may be a notification per recipients (or several) per platform. Each notification can contain platform specific payload (for exemple an MMS can contains a sound or an image). The system need to be scalable, I need to be able to send a very large amount of notification without crashing either the application or the server. It is a two step process, first a customer may type a message and choose a platform to send to, and the notification(s) should be created to be processed either real-time either later. Then the system needs to send the notification to the platform provider. For now, I end up with some though but I don't know how scalable it will be or if it is a good design. I've though of the following objects (in a pseudo language): a generic Notification object: class Notification { String $message; Payload $payload; Collection<Recipient> $recipients; } The problem with the following objects is what if I've 1.000.000 recipients ? Even if the Recipient object is very small, it'll take too much memory. I could also create one Notification per recipient, but some platform providers requires me to send it in batch, meaning I need to define one Notification with several Recipients. Each created notification could be stored in a persistent storage like a DB or Redis. Would it be a good it to aggregate this later to make sure it is scalable? On the second step, I need to process this notification. But how could I distinguish the notification to the right platform provider? Should I use an object like MMSNotification extending an abstract Notification? or something like Notification.setType('MMS')? To allow to process a lot of notification at the same time, I think a messaging queue system like RabbitMQ may be the right tool. Is it? It would allow me to queue a lot of notification and have several worker to pop notification and process them. But what if I need to batch the recipients as seen above? Then I imagine a NotificationProcessor object for which I could I add NotificationHandler each NotificationHandler would be in charge to connect the platform provider and perform notification. I can also use an EventManager to allow pluggable behavior. Any feedbacks or ideas? Thanks for giving your time. Note: I'm used to work in PHP and it is likely the language of my choice.

    Read the article

  • How to Assign a Default Signature in Outlook 2013

    - by Lori Kaufman
    If you sign most of your emails the same way, you can easily specify a default signature to automatically insert into new email messages and replies and forwards. This can be done directly in the Signature editor in Outlook 2013. We recently showed you how to create a new signature. You can also create multiple signatures for each email account and define a different default signature for each account. When you change your sending account when composing a new email message, the signature would change automatically as well. NOTE: To have a signature added automatically to new email messages and replies and forwards, you must have a default signature assigned in each email account. If you don’t want a signature in every account, you can create a signature with just a space, a full stop, dashes, or other generic characters. To assign a default signature, open Outlook and click the File tab. Click Options in the menu list on the left side of the Account Information screen. On the Outlook Options dialog box, click Mail in the list of options on the left side of the dialog box. On the Mail screen, click Signatures in the Compose messages section. To change the default signature for an email account, select the account from the E-mail account drop-down list on the top, right side of the dialog box under Choose default signature. Then, select the signature you want to use by default for New messages and for Replies/forwards from the other two drop-down lists. Click OK to accept your changes and close the dialog box. Click OK on the Outlook Options dialog box to close it. You can also access the Signatures and Stationery dialog box from the Message window for new emails and drafts. Click New Email on the Home tab or double-click an email in the Drafts folder to access the Message window. Click Signature in the Include section of the New Mail Message window and select Signatures from the drop-down menu. In the next few days, we will be covering how to use the features of the signature editor next, and then how to insert and change signatures manually, backup and restore your signatures, and modify a signature for use in plain text emails.     

    Read the article

  • Dynamically loading Assemblies to reduce Runtime Depencies

    - by Rick Strahl
    I've been working on a request to the West Wind Application Configuration library to add JSON support. The config library is a very easy to use code-first approach to configuration: You create a class that holds the configuration data that inherits from a base configuration class, and then assign a persistence provider at runtime that determines where and how the configuration data is store. Currently the library supports .NET Configuration stores (web.config/app.config), XML files, SQL records and string storage.About once a week somebody asks me about JSON support and I've deflected this question for the longest time because frankly I think that JSON as a configuration store doesn't really buy a heck of a lot over XML. Both formats require the user to perform some fixup of the plain configuration data - in XML into XML tags, with JSON using JSON delimiters for properties and property formatting rules. Sure JSON is a little less verbose and maybe a little easier to read if you have hierarchical data, but overall the differences are pretty minor in my opinion. And yet - the requests keep rolling in.Hard Link Issues in a Component LibraryAnother reason I've been hesitant is that I really didn't want to pull in a dependency on an external JSON library - in this case JSON.NET - into the core library. If you're not using JSON.NET elsewhere I don't want a user to have to require a hard dependency on JSON.NET unless they want to use the JSON feature. JSON.NET is also sensitive to versions and doesn't play nice with multiple versions when hard linked. For example, when you have a reference to V4.4 in your project but the host application has a reference to version 4.5 you can run into assembly load problems. NuGet's Update-Package can solve some of this *if* you can recompile, but that's not ideal for a component that's supposed to be just plug and play. This is no criticism of JSON.NET - this really applies to any dependency that might change.  So hard linking the DLL can be problematic for a number reasons, but the primary reason is to not force loading of JSON.NET unless you actually need it when you use the JSON configuration features of the library.Enter Dynamic LoadingSo rather than adding an assembly reference to the project, I decided that it would be better to dynamically load the DLL at runtime and then use dynamic typing to access various classes. This allows me to run without a hard assembly reference and allows more flexibility with version number differences now and in the future.But there are also a couple of downsides:No assembly reference means only dynamic access - no compiler type checking or IntellisenseRequirement for the host application to have reference to JSON.NET or else get runtime errorsThe former is minor, but the latter can be problematic. Runtime errors are always painful, but in this case I'm willing to live with this. If you want to use JSON configuration settings JSON.NET needs to be loaded in the project. If this is a Web project, it'll likely be there already.So there are a few things that are needed to make this work:Dynamically create an instance and optionally attempt to load an Assembly (if not loaded)Load types into dynamic variablesUse Reflection for a few tasks like statics/enumsThe dynamic keyword in C# makes the formerly most difficult Reflection part - method calls and property assignments - fairly painless. But as cool as dynamic is it doesn't handle all aspects of Reflection. Specifically it doesn't deal with object activation, truly dynamic (string based) member activation or accessing of non instance members, so there's still a little bit of work left to do with Reflection.Dynamic Object InstantiationThe first step in getting the process rolling is to instantiate the type you need to work with. This might be a two step process - loading the instance from a string value, since we don't have a hard type reference and potentially having to load the assembly. Although the host project might have a reference to JSON.NET, that instance might have not been loaded yet since it hasn't been accessed yet. In ASP.NET this won't be a problem, since ASP.NET preloads all referenced assemblies on AppDomain startup, but in other executable project, assemblies are just in time loaded only when they are accessed.Instantiating a type is a two step process: Finding the type reference and then activating it. Here's the generic code out of my ReflectionUtils library I use for this:/// <summary> /// Creates an instance of a type based on a string. Assumes that the type's /// </summary> /// <param name="typeName">Common name of the type</param> /// <param name="args">Any constructor parameters</param> /// <returns></returns> public static object CreateInstanceFromString(string typeName, params object[] args) { object instance = null; Type type = null; try { type = GetTypeFromName(typeName); if (type == null) return null; instance = Activator.CreateInstance(type, args); } catch { return null; } return instance; } /// <summary> /// Helper routine that looks up a type name and tries to retrieve the /// full type reference in the actively executing assemblies. /// </summary> /// <param name="typeName"></param> /// <returns></returns> public static Type GetTypeFromName(string typeName) { Type type = null; // Let default name binding find it type = Type.GetType(typeName, false); if (type != null) return type; // look through assembly list var assemblies = AppDomain.CurrentDomain.GetAssemblies(); // try to find manually foreach (Assembly asm in assemblies) { type = asm.GetType(typeName, false); if (type != null) break; } return type; } To use this for loading JSON.NET I have a small factory function that instantiates JSON.NET and sets a bunch of configuration settings on the generated object. The startup code also looks for failure and tries loading up the assembly when it fails since that's the main reason the load would fail. Finally it also caches the loaded instance for reuse (according to James the JSON.NET instance is thread safe and quite a bit faster when cached). Here's what the factory function looks like in JsonSerializationUtils:/// <summary> /// Dynamically creates an instance of JSON.NET /// </summary> /// <param name="throwExceptions">If true throws exceptions otherwise returns null</param> /// <returns>Dynamic JsonSerializer instance</returns> public static dynamic CreateJsonNet(bool throwExceptions = true) { if (JsonNet != null) return JsonNet; lock (SyncLock) { if (JsonNet != null) return JsonNet; // Try to create instance dynamic json = ReflectionUtils.CreateInstanceFromString("Newtonsoft.Json.JsonSerializer"); if (json == null) { try { var ass = AppDomain.CurrentDomain.Load("Newtonsoft.Json"); json = ReflectionUtils.CreateInstanceFromString("Newtonsoft.Json.JsonSerializer"); } catch (Exception ex) { if (throwExceptions) throw; return null; } } if (json == null) return null; json.ReferenceLoopHandling = (dynamic) ReflectionUtils.GetStaticProperty("Newtonsoft.Json.ReferenceLoopHandling", "Ignore"); // Enums as strings in JSON dynamic enumConverter = ReflectionUtils.CreateInstanceFromString("Newtonsoft.Json.Converters.StringEnumConverter"); json.Converters.Add(enumConverter); JsonNet = json; } return JsonNet; }This code's purpose is to return a fully configured JsonSerializer instance. As you can see the code tries to create an instance and when it fails tries to load the assembly, and then re-tries loading.Once the instance is loaded some configuration occurs on it. Specifically I set the ReferenceLoopHandling option to not blow up immediately when circular references are encountered. There are a host of other small config setting that might be useful to set, but the default seem to be good enough in recent versions. Note that I'm setting ReferenceLoopHandling which requires an Enum value to be set. There's no real easy way (short of using the cardinal numeric value) to set a property or pass parameters from static values or enums. This means I still need to use Reflection to make this work. I'm using the same ReflectionUtils class I previously used to handle this for me. The function looks up the type and then uses Type.InvokeMember() to read the static property.Another feature I need is have Enum values serialized as strings rather than numeric values which is the default. To do this I can use the StringEnumConverter to convert enums to strings by adding it to the Converters collection.As you can see there's still a bit of Reflection to be done even in C# 4+ with dynamic, but with a few helpers this process is relatively painless.Doing the actual JSON ConversionFinally I need to actually do my JSON conversions. For the Utility class I need serialization that works for both strings and files so I created four methods that handle these tasks two each for serialization and deserialization for string and file.Here's what the File Serialization looks like:/// <summary> /// Serializes an object instance to a JSON file. /// </summary> /// <param name="value">the value to serialize</param> /// <param name="fileName">Full path to the file to write out with JSON.</param> /// <param name="throwExceptions">Determines whether exceptions are thrown or false is returned</param> /// <param name="formatJsonOutput">if true pretty-formats the JSON with line breaks</param> /// <returns>true or false</returns> public static bool SerializeToFile(object value, string fileName, bool throwExceptions = false, bool formatJsonOutput = false) { dynamic writer = null; FileStream fs = null; try { Type type = value.GetType(); var json = CreateJsonNet(throwExceptions); if (json == null) return false; fs = new FileStream(fileName, FileMode.Create); var sw = new StreamWriter(fs, Encoding.UTF8); writer = Activator.CreateInstance(JsonTextWriterType, sw); if (formatJsonOutput) writer.Formatting = (dynamic)Enum.Parse(FormattingType, "Indented"); writer.QuoteChar = '"'; json.Serialize(writer, value); } catch (Exception ex) { Debug.WriteLine("JsonSerializer Serialize error: " + ex.Message); if (throwExceptions) throw; return false; } finally { if (writer != null) writer.Close(); if (fs != null) fs.Close(); } return true; }You can see more of the dynamic invocation in this code. First I grab the dynamic JsonSerializer instance using the CreateJsonNet() method shown earlier which returns a dynamic. I then create a JsonTextWriter and configure a couple of enum settings on it, and then call Serialize() on the serializer instance with the JsonTextWriter that writes the output to disk. Although this code is dynamic it's still fairly short and readable.For full circle operation here's the DeserializeFromFile() version:/// <summary> /// Deserializes an object from file and returns a reference. /// </summary> /// <param name="fileName">name of the file to serialize to</param> /// <param name="objectType">The Type of the object. Use typeof(yourobject class)</param> /// <param name="binarySerialization">determines whether we use Xml or Binary serialization</param> /// <param name="throwExceptions">determines whether failure will throw rather than return null on failure</param> /// <returns>Instance of the deserialized object or null. Must be cast to your object type</returns> public static object DeserializeFromFile(string fileName, Type objectType, bool throwExceptions = false) { dynamic json = CreateJsonNet(throwExceptions); if (json == null) return null; object result = null; dynamic reader = null; FileStream fs = null; try { fs = new FileStream(fileName, FileMode.Open, FileAccess.Read); var sr = new StreamReader(fs, Encoding.UTF8); reader = Activator.CreateInstance(JsonTextReaderType, sr); result = json.Deserialize(reader, objectType); reader.Close(); } catch (Exception ex) { Debug.WriteLine("JsonNetSerialization Deserialization Error: " + ex.Message); if (throwExceptions) throw; return null; } finally { if (reader != null) reader.Close(); if (fs != null) fs.Close(); } return result; }This code is a little more compact since there are no prettifying options to set. Here JsonTextReader is created dynamically and it receives the output from the Deserialize() operation on the serializer.You can take a look at the full JsonSerializationUtils.cs file on GitHub to see the rest of the operations, but the string operations are very similar - the code is fairly repetitive.These generic serialization utilities isolate the dynamic serialization logic that has to deal with the dynamic nature of JSON.NET, and any code that uses these functions is none the wiser that JSON.NET is dynamically loaded.Using the JsonSerializationUtils WrapperThe final consumer of the SerializationUtils wrapper is an actual ConfigurationProvider, that is responsible for handling reading and writing JSON values to and from files. The provider is simple a small wrapper around the SerializationUtils component and there's very little code to make this work now:The whole provider looks like this:/// <summary> /// Reads and Writes configuration settings in .NET config files and /// sections. Allows reading and writing to default or external files /// and specification of the configuration section that settings are /// applied to. /// </summary> public class JsonFileConfigurationProvider<TAppConfiguration> : ConfigurationProviderBase<TAppConfiguration> where TAppConfiguration: AppConfiguration, new() { /// <summary> /// Optional - the Configuration file where configuration settings are /// stored in. If not specified uses the default Configuration Manager /// and its default store. /// </summary> public string JsonConfigurationFile { get { return _JsonConfigurationFile; } set { _JsonConfigurationFile = value; } } private string _JsonConfigurationFile = string.Empty; public override bool Read(AppConfiguration config) { var newConfig = JsonSerializationUtils.DeserializeFromFile(JsonConfigurationFile, typeof(TAppConfiguration)) as TAppConfiguration; if (newConfig == null) { if(Write(config)) return true; return false; } DecryptFields(newConfig); DataUtils.CopyObjectData(newConfig, config, "Provider,ErrorMessage"); return true; } /// <summary> /// Return /// </summary> /// <typeparam name="TAppConfig"></typeparam> /// <returns></returns> public override TAppConfig Read<TAppConfig>() { var result = JsonSerializationUtils.DeserializeFromFile(JsonConfigurationFile, typeof(TAppConfig)) as TAppConfig; if (result != null) DecryptFields(result); return result; } /// <summary> /// Write configuration to XmlConfigurationFile location /// </summary> /// <param name="config"></param> /// <returns></returns> public override bool Write(AppConfiguration config) { EncryptFields(config); bool result = JsonSerializationUtils.SerializeToFile(config, JsonConfigurationFile,false,true); // Have to decrypt again to make sure the properties are readable afterwards DecryptFields(config); return result; } }This incidentally demonstrates how easy it is to create a new provider for the West Wind Application Configuration component. Simply implementing 3 methods will do in most cases.Note this code doesn't have any dynamic dependencies - all that's abstracted away in the JsonSerializationUtils(). From here on, serializing JSON is just a matter of calling the static methods on the SerializationUtils class.Already, there are several other places in some other tools where I use JSON serialization this is coming in very handy. With a couple of lines of code I was able to add JSON.NET support to an older AJAX library that I use replacing quite a bit of code that was previously in use. And for any other manual JSON operations (in a couple of apps I use JSON Serialization for 'blob' like document storage) this is also going to be handy.Performance?Some of you might be thinking that using dynamic and Reflection can't be good for performance. And you'd be right… In performing some informal testing it looks like the performance of the native code is nearly twice as fast as the dynamic code. Most of the slowness is attributable to type lookups. To test I created a native class that uses an actual reference to JSON.NET and performance was consistently around 85-90% faster with the referenced code. That being said though - I serialized 10,000 objects in 80ms vs. 45ms so this isn't hardly slouchy. For the configuration component speed is not that important because both read and write operations typically happen once on first access and then every once in a while. But for other operations - say a serializer trying to handle AJAX requests on a Web Server one would be well served to create a hard dependency.Dynamic Loading - Worth it?On occasion dynamic loading makes sense. But there's a price to be paid in added code complexity and a performance hit. But for some operations that are not pivotal to a component or application and only used under certain circumstances dynamic loading can be beneficial to avoid having to ship extra files and loading down distributions. These days when you create new projects in Visual Studio with 30 assemblies before you even add your own code, trying to keep file counts under control seems a good idea. It's not the kind of thing you do on a regular basis, but when needed it can be a useful tool. Hopefully some of you find this information useful…© Rick Strahl, West Wind Technologies, 2005-2013Posted in .NET  C#   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • apt-get broken + dependencies issue + many software uninstalled

    - by vnc786
    OS=ubuntu 12.04 64bit 3.2.0-29-generic what i did? apt-get purge libre* which i thought will remove LO 3.5 but, which was a big mistake after couple of moments, i realise that its is removing all other software so i did cltl-c which stopped the apt process i restarted my system after that i found that following software were missing apt-get,evince(pdf), cheese etc..here is full list http://pastebin.com/CWHrw10y i managed to install APT deb file through dpkg but now i am not able to do any installation so i just removed /var/lib/dpkg/status and created new but that didnt help apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: apt-utils coreutils debconf debconf-i18n dpkg libacl1 libapt-inst1.4 libapt-pkg4.12 libattr1 libbz2-1.0 libdb5.1 libgcc1 liblocale-gettext-perl liblzma5 libselinux1 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl perl-base tar tzdata xz-utils zlib1g Suggested packages: debconf-doc debconf-utils whiptail dialog gnome-utils libterm-readline-gnu-perl libgtk2-perl libnet-ldap-perl libqtgui4-perl libqtcore4-perl apt bzip2 ncompress xz-lzma The following NEW packages will be installed: apt-utils coreutils debconf debconf-i18n dpkg libacl1 libapt-inst1.4 libapt-pkg4.12 libattr1 libbz2-1.0 libdb5.1 libgcc1 liblocale-gettext-perl liblzma5 libselinux1 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl perl-base tar tzdata xz-utils zlib1g 0 upgraded, 24 newly installed, 0 to remove and 0 not upgraded. 2 not fully installed or removed. Need to get 0 B/9,246 kB of archives. After this operation, 29.9 MB of additional disk space will be used. Do you want to continue [Y/n]? y E: Cannot get debconf version. Is debconf installed? debconf: apt-extracttemplates failed: No such file or directory dpkg: regarding .../libgcc1_1%3a4.6.3-1ubuntu5_amd64.deb containing libgcc1, pre-dependency problem: libgcc1 pre-depends on multiarch-support multiarch-support is unpacked, but has never been configured. dpkg: error processing /var/cache/apt/archives/libgcc1_1%3a4.6.3-1ubuntu5_amd64.deb (--unpack): pre-dependency problem - not installing libgcc1 No apport report written because MaxReports is reached already Errors were encountered while processing: /var/cache/apt/archives/libgcc1_1%3a4.6.3-1ubuntu5_amd64.deb E: Internal Error, No file name for libc6 W: Could not perform immediate configuration on 'multiarch-support:amd64'. Please see man 5 apt.conf under APT::Immediate-Configure for details. (2) E: Sub-process /usr/bin/dpkg returned an error code (1) # apt-get -u dist-upgrade Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: libc6 : Depends: libgcc1 but it is not installed Depends: tzdata but it is not installed E: Unmet dependencies. Try using -f. i have tried below link Unable to install due to debconf problem How do I resolve unmet dependencies? but no help... thanks

    Read the article

  • Wireless not working with a RaLink RT3090

    - by Promather
    I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with wireless LAN. It simply doesn't work! Could you please help me with this? Output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

    Read the article

  • Ubuntu boots to terminal on start up

    - by Jules
    For a long time I've been unable to get updates due to a "repositories not found" error. Yesterday someone fixed this for me but after installing 94 days worth of updates my system wanted to restart. It looks like it is booting normally but then it opens a terminal and asks for my login and password. I had tried Ctrl+ Alt +F7 and startx to no avail. Here is everything that appears on screen when I turn the computer on. Ubuntu 10.04.4 LTS box-o-doom tty1 box-o-doom login:julian password: last login: Sun Jul 8 10:28:02 BST tty1 Linux box-o-doom 2.6.32-41-generic-pae #91-Ubuntu SMP Wed Jun 13 12:00:09 UTC 20 12 i686 GNU/Linux Ubuntu 10.04.4 LTS Welcome to Ubuntu! *Documentation: http://help.ubuntu.com julian@box-o-doom:~$_ i then tried dmesg which produced hundreds of lines all very similar to the first line reproduced here [ 9.453119] type=1505 audit1341742405.022:10): operation="profile_replace" pid=743 name="/usr/lib/connman/scripts/dhclient-script" follwed by this at the end [ 9.475880] alloc irq_desc for 27 on node-1 [ 9.475883] alloc kstat_irqs on node-1 [ 9.475890]forcedeth 0000:00:07.0: irq27 for MSI/MSI-X [ 9.760031] hda_code:ALC662 rev1: BIOS auto-probing. [ 10.048095] input:HDA Digital PCBeep as /devices/pci 0000:00:05.o/inp ut/input6 [ 10.862278] ppdev: user-space parallel port driver [ 20.268018] eth0: no IPv6 routers present julian@box-o-doom:~$_ results of startx lots of text scrolls off the screen and i have no way of reading it. but everything i can see is reproduced below current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version Markers: (--) probed, (**) from config file, (==) defult setting, (++) from command line, (!!) notice, (II) informational. (WW) Warning, (EE) error, (NI) not implemented, (??) unknown. (==) log file: "/var/log/Xorg.0.log", Time: SUn Jul 8 12:02:23 2012 (==) using config file: "/etc/X11/xorg.conf" (==)using config directory: "/usr/lib/X11/xorg.conf.d" FATAL: Module nvidia not found. (EE) NVIDIA: Failed to load the NVIDIA kernal module please check your (EE) NVIDIA: systems kernal log for aditional error messages. (EE) Failed to load module "nvidia" (module specific error, 0) (EE) No drivers available. Fatal server error: no screens found please consult the X.org foundation support at http://wiki.x.org for help please also check the log files at "/var/log/X.org.0.log" for aditional informati on ddxSigGiveUp: Closing log giving up xinit: No such file or directory (errno 2): unable to connect to X server xinit: No suck process (errno 3): server error julian@box-o-doom:~$_

    Read the article

  • GPL vs plugin interfaces not designed with a specific application in mind

    - by Kristóf Marussy
    I am not seeking or in need of legal advice, but an interesting though experiment came to my mind. Imagine the following situtation (I cannot really think about a concrete example and I am unsure if a real manifestation even exists): there is a free (libre) api A licensed under some permissive license or even LGPL. Non-free application B implements this api in order host plugins, but there are other free software doing the same thing. Moreover, there is plugin C acting as a plugin under api A. It links to library D, that is under GPL, so C is also under GPL. Plugins using A are loaded into hosts via a dlopen-like mechanism and use complex data structure for host-plugin communication. Neither B nor C distribute any files that may be required for A to function properly (like headers containing the structure definitions of A or dynamic libraries containing helper functions for A written by the authors of A), but such things may exist. Now some user installs application B and plugin C on his machine, along with anything that may be required for api A to function properly. Then he proceeds and loads C into B and creates some intellectual property with B which is not a piece of software. Did a GPL violation happend at some point, and if so, who violated GPL and why? The authors of C violate D's license by making C possible to be used in non-free host B? This is a possibility because they can't give and exception of GPL (like one described in http://www.gnu.org/licenses/gpl-faq.html#GPLPluginsInNF or http://www.gnu.org/licenses/gpl-faq.html#LinkingOverControlledInterface) due to D's license terms. The authors of B violate C's and D's license by making C possible to be loaded in B? This is a possibility because http://www.gnu.org/licenses/gpl-faq.html#NFUseGPLPlugins disallows the mechanisms A uses for communitation between the free and non-free modules. The authors of A, because the api may be used (and in this case, was used) for communication between GPL'd and non-free software. This would be extremely absurd. The user, because at the moment of loading B into C, he made a derived work of C. I think this is impossible, because he does not distribute it. But would the situation change is he decided to release a configuration file of B which makes B load C as a plugin? Nobody, because A counts as a 'system library', and both B and C directly interact only with A, not eachother. In a sane world, this would happen... A concrete example of A could be some kind of audio (think LADSPA) or image processing api. However, I could find no such interface (that is free software, generic and is also implemented by commercial tools). A real-world example could also be quite enlightening.

    Read the article

  • ASP.NET Hosting :: ASP.NET File Upload Control

    - by mbridge
    The asp.net FileUpload control allows a user to browse and upload files to the web server. From developers perspective, it is as simple as dragging and dropping the FileUpload control to the aspx page. An extra control, like a Button control, or some other control is needed, to actually save the file. <asp:FileUploadID="FileUpload1"runat="server"/> <asp:ButtonID="B1"runat="server"Text="Save"OnClick="B1_Click"/> By default, the FileUpload control allows a maximum of 4MB file to be uploaded and the execution timeout is 110 seconds. These properties can be changed from within the web.config file’s httpRuntime section. The maxRequestLength property determines the maximum file size that can be uploaded. The executionTimeout property determines the maximum time for execution. <httpRuntimemaxRequestLength="8192"executionTimeout="220"/> From code behind, the mime type, size of the file, file name and the extension of the file can be obtained. The maximum file size that can be uploaded can be obtained and modified using the System.Web.Configuration.HttpRuntimeSection class. Files can be alternatively saved using the System.IO.HttpFileCollection class. This collection class can be populated using the Request.Files property. The collection contains HttpPostedFile class which contains a reference to the class. using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; using System.IO; using System.Configuration; using System.Web.Configuration;   namespace WebApplication1 {     public partial class WebControls : System.Web.UI.Page     {         protected void Page_Load(object sender, EventArgs e)         {         }           //Using FileUpload control to upload and save files         protected void B1_Click(object sender, EventArgs e)         {             if (FileUpload1.HasFile && FileUpload1.PostedFile.ContentLength > 0)             {                 //mime type of the uploaded file                 string mimeType = FileUpload1.PostedFile.ContentType;                   //size of the uploaded file                 int size = FileUpload1.PostedFile.ContentLength; // bytes                   //extension of the uploaded file                 string extension = System.IO.Path.GetExtension(FileUpload1.FileName);                                  //save file                 string path = Server.MapPath("path");                                 FileUpload1.SaveAs(path + FileUpload1.FileName);                              }             //maximum file size allowed             HttpRuntimeSection rt = new HttpRuntimeSection();             rt.MaxRequestLength = rt.MaxRequestLength * 2;             int length = rt.MaxRequestLength;                     //execution timeout             TimeSpan ts = rt.ExecutionTimeout;             double secomds = ts.TotalSeconds;           }           //Using Request.Files to save files         private void AltSaveFile()         {             HttpFileCollection coll = Request.Files;             for (int i = 0; i < coll.Count; i++)             {                 HttpPostedFile file = coll[i];                   if (file.ContentLength > 0)                     ;//do something             }         }     } }

    Read the article

  • wifi problems with lenovo g580 on kubuntu-13.04-desktop-amd64

    - by user203963
    i have a wifi connection problem in lenovo g580 on kubuntu-13.04-desktop-amd64. ethernet cable is working properly but wifi does'nt connect below are some hardware information sudo lshw -class network gives *-network description: Ethernet interface product: AR8162 Fast Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 10 serial: 20:89:84:3d:e9:10 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm pciexpress msi msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=alx driverversion=1.2.3 duplex=full firmware=N/A ip=192.168.0.106 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:16 memory:90500000-9053ffff ioport:2000(size=128) *-network description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=bcma-pci-bridge latency=0 resources: irq:17 memory:90400000-90403fff *-network description: Wireless interface physical id: 3 logical name: wlan0 serial: 68:94:23:fa:2c:d9 capabilities: ethernet physical wireless configuration: broadcast=yes driver=brcmsmac driverversion=3.8.0-19-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bgn lsubs gives Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0489:e032 Foxconn / Hon Hai Bus 002 Device 003: ID 04f2:b2e2 Chicony Electronics Co., Ltd lspci gives 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 01:00.0 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 10) 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Does anyone knows the solution? rfkill list all gives 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 2: ideapad_wlan: Wireless LAN Soft blocked: yes Hard blocked: no 3: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no

    Read the article

  • Dynamically loading Assemblies to reduce Runtime Dependencies

    - by Rick Strahl
    I've been working on a request to the West Wind Application Configuration library to add JSON support. The config library is a very easy to use code-first approach to configuration: You create a class that holds the configuration data that inherits from a base configuration class, and then assign a persistence provider at runtime that determines where and how the configuration data is store. Currently the library supports .NET Configuration stores (web.config/app.config), XML files, SQL records and string storage.About once a week somebody asks me about JSON support and I've deflected this question for the longest time because frankly I think that JSON as a configuration store doesn't really buy a heck of a lot over XML. Both formats require the user to perform some fixup of the plain configuration data - in XML into XML tags, with JSON using JSON delimiters for properties and property formatting rules. Sure JSON is a little less verbose and maybe a little easier to read if you have hierarchical data, but overall the differences are pretty minor in my opinion. And yet - the requests keep rolling in.Hard Link Issues in a Component LibraryAnother reason I've been hesitant is that I really didn't want to pull in a dependency on an external JSON library - in this case JSON.NET - into the core library. If you're not using JSON.NET elsewhere I don't want a user to have to require a hard dependency on JSON.NET unless they want to use the JSON feature. JSON.NET is also sensitive to versions and doesn't play nice with multiple versions when hard linked. For example, when you have a reference to V4.4 in your project but the host application has a reference to version 4.5 you can run into assembly load problems. NuGet's Update-Package can solve some of this *if* you can recompile, but that's not ideal for a component that's supposed to be just plug and play. This is no criticism of JSON.NET - this really applies to any dependency that might change.  So hard linking the DLL can be problematic for a number reasons, but the primary reason is to not force loading of JSON.NET unless you actually need it when you use the JSON configuration features of the library.Enter Dynamic LoadingSo rather than adding an assembly reference to the project, I decided that it would be better to dynamically load the DLL at runtime and then use dynamic typing to access various classes. This allows me to run without a hard assembly reference and allows more flexibility with version number differences now and in the future.But there are also a couple of downsides:No assembly reference means only dynamic access - no compiler type checking or IntellisenseRequirement for the host application to have reference to JSON.NET or else get runtime errorsThe former is minor, but the latter can be problematic. Runtime errors are always painful, but in this case I'm willing to live with this. If you want to use JSON configuration settings JSON.NET needs to be loaded in the project. If this is a Web project, it'll likely be there already.So there are a few things that are needed to make this work:Dynamically create an instance and optionally attempt to load an Assembly (if not loaded)Load types into dynamic variablesUse Reflection for a few tasks like statics/enumsThe dynamic keyword in C# makes the formerly most difficult Reflection part - method calls and property assignments - fairly painless. But as cool as dynamic is it doesn't handle all aspects of Reflection. Specifically it doesn't deal with object activation, truly dynamic (string based) member activation or accessing of non instance members, so there's still a little bit of work left to do with Reflection.Dynamic Object InstantiationThe first step in getting the process rolling is to instantiate the type you need to work with. This might be a two step process - loading the instance from a string value, since we don't have a hard type reference and potentially having to load the assembly. Although the host project might have a reference to JSON.NET, that instance might have not been loaded yet since it hasn't been accessed yet. In ASP.NET this won't be a problem, since ASP.NET preloads all referenced assemblies on AppDomain startup, but in other executable project, assemblies are just in time loaded only when they are accessed.Instantiating a type is a two step process: Finding the type reference and then activating it. Here's the generic code out of my ReflectionUtils library I use for this:/// <summary> /// Creates an instance of a type based on a string. Assumes that the type's /// </summary> /// <param name="typeName">Common name of the type</param> /// <param name="args">Any constructor parameters</param> /// <returns></returns> public static object CreateInstanceFromString(string typeName, params object[] args) { object instance = null; Type type = null; try { type = GetTypeFromName(typeName); if (type == null) return null; instance = Activator.CreateInstance(type, args); } catch { return null; } return instance; } /// <summary> /// Helper routine that looks up a type name and tries to retrieve the /// full type reference in the actively executing assemblies. /// </summary> /// <param name="typeName"></param> /// <returns></returns> public static Type GetTypeFromName(string typeName) { Type type = null; // Let default name binding find it type = Type.GetType(typeName, false); if (type != null) return type; // look through assembly list var assemblies = AppDomain.CurrentDomain.GetAssemblies(); // try to find manually foreach (Assembly asm in assemblies) { type = asm.GetType(typeName, false); if (type != null) break; } return type; } To use this for loading JSON.NET I have a small factory function that instantiates JSON.NET and sets a bunch of configuration settings on the generated object. The startup code also looks for failure and tries loading up the assembly when it fails since that's the main reason the load would fail. Finally it also caches the loaded instance for reuse (according to James the JSON.NET instance is thread safe and quite a bit faster when cached). Here's what the factory function looks like in JsonSerializationUtils:/// <summary> /// Dynamically creates an instance of JSON.NET /// </summary> /// <param name="throwExceptions">If true throws exceptions otherwise returns null</param> /// <returns>Dynamic JsonSerializer instance</returns> public static dynamic CreateJsonNet(bool throwExceptions = true) { if (JsonNet != null) return JsonNet; lock (SyncLock) { if (JsonNet != null) return JsonNet; // Try to create instance dynamic json = ReflectionUtils.CreateInstanceFromString("Newtonsoft.Json.JsonSerializer"); if (json == null) { try { var ass = AppDomain.CurrentDomain.Load("Newtonsoft.Json"); json = ReflectionUtils.CreateInstanceFromString("Newtonsoft.Json.JsonSerializer"); } catch (Exception ex) { if (throwExceptions) throw; return null; } } if (json == null) return null; json.ReferenceLoopHandling = (dynamic) ReflectionUtils.GetStaticProperty("Newtonsoft.Json.ReferenceLoopHandling", "Ignore"); // Enums as strings in JSON dynamic enumConverter = ReflectionUtils.CreateInstanceFromString("Newtonsoft.Json.Converters.StringEnumConverter"); json.Converters.Add(enumConverter); JsonNet = json; } return JsonNet; }This code's purpose is to return a fully configured JsonSerializer instance. As you can see the code tries to create an instance and when it fails tries to load the assembly, and then re-tries loading.Once the instance is loaded some configuration occurs on it. Specifically I set the ReferenceLoopHandling option to not blow up immediately when circular references are encountered. There are a host of other small config setting that might be useful to set, but the default seem to be good enough in recent versions. Note that I'm setting ReferenceLoopHandling which requires an Enum value to be set. There's no real easy way (short of using the cardinal numeric value) to set a property or pass parameters from static values or enums. This means I still need to use Reflection to make this work. I'm using the same ReflectionUtils class I previously used to handle this for me. The function looks up the type and then uses Type.InvokeMember() to read the static property.Another feature I need is have Enum values serialized as strings rather than numeric values which is the default. To do this I can use the StringEnumConverter to convert enums to strings by adding it to the Converters collection.As you can see there's still a bit of Reflection to be done even in C# 4+ with dynamic, but with a few helpers this process is relatively painless.Doing the actual JSON ConversionFinally I need to actually do my JSON conversions. For the Utility class I need serialization that works for both strings and files so I created four methods that handle these tasks two each for serialization and deserialization for string and file.Here's what the File Serialization looks like:/// <summary> /// Serializes an object instance to a JSON file. /// </summary> /// <param name="value">the value to serialize</param> /// <param name="fileName">Full path to the file to write out with JSON.</param> /// <param name="throwExceptions">Determines whether exceptions are thrown or false is returned</param> /// <param name="formatJsonOutput">if true pretty-formats the JSON with line breaks</param> /// <returns>true or false</returns> public static bool SerializeToFile(object value, string fileName, bool throwExceptions = false, bool formatJsonOutput = false) { dynamic writer = null; FileStream fs = null; try { Type type = value.GetType(); var json = CreateJsonNet(throwExceptions); if (json == null) return false; fs = new FileStream(fileName, FileMode.Create); var sw = new StreamWriter(fs, Encoding.UTF8); writer = Activator.CreateInstance(JsonTextWriterType, sw); if (formatJsonOutput) writer.Formatting = (dynamic)Enum.Parse(FormattingType, "Indented"); writer.QuoteChar = '"'; json.Serialize(writer, value); } catch (Exception ex) { Debug.WriteLine("JsonSerializer Serialize error: " + ex.Message); if (throwExceptions) throw; return false; } finally { if (writer != null) writer.Close(); if (fs != null) fs.Close(); } return true; }You can see more of the dynamic invocation in this code. First I grab the dynamic JsonSerializer instance using the CreateJsonNet() method shown earlier which returns a dynamic. I then create a JsonTextWriter and configure a couple of enum settings on it, and then call Serialize() on the serializer instance with the JsonTextWriter that writes the output to disk. Although this code is dynamic it's still fairly short and readable.For full circle operation here's the DeserializeFromFile() version:/// <summary> /// Deserializes an object from file and returns a reference. /// </summary> /// <param name="fileName">name of the file to serialize to</param> /// <param name="objectType">The Type of the object. Use typeof(yourobject class)</param> /// <param name="binarySerialization">determines whether we use Xml or Binary serialization</param> /// <param name="throwExceptions">determines whether failure will throw rather than return null on failure</param> /// <returns>Instance of the deserialized object or null. Must be cast to your object type</returns> public static object DeserializeFromFile(string fileName, Type objectType, bool throwExceptions = false) { dynamic json = CreateJsonNet(throwExceptions); if (json == null) return null; object result = null; dynamic reader = null; FileStream fs = null; try { fs = new FileStream(fileName, FileMode.Open, FileAccess.Read); var sr = new StreamReader(fs, Encoding.UTF8); reader = Activator.CreateInstance(JsonTextReaderType, sr); result = json.Deserialize(reader, objectType); reader.Close(); } catch (Exception ex) { Debug.WriteLine("JsonNetSerialization Deserialization Error: " + ex.Message); if (throwExceptions) throw; return null; } finally { if (reader != null) reader.Close(); if (fs != null) fs.Close(); } return result; }This code is a little more compact since there are no prettifying options to set. Here JsonTextReader is created dynamically and it receives the output from the Deserialize() operation on the serializer.You can take a look at the full JsonSerializationUtils.cs file on GitHub to see the rest of the operations, but the string operations are very similar - the code is fairly repetitive.These generic serialization utilities isolate the dynamic serialization logic that has to deal with the dynamic nature of JSON.NET, and any code that uses these functions is none the wiser that JSON.NET is dynamically loaded.Using the JsonSerializationUtils WrapperThe final consumer of the SerializationUtils wrapper is an actual ConfigurationProvider, that is responsible for handling reading and writing JSON values to and from files. The provider is simple a small wrapper around the SerializationUtils component and there's very little code to make this work now:The whole provider looks like this:/// <summary> /// Reads and Writes configuration settings in .NET config files and /// sections. Allows reading and writing to default or external files /// and specification of the configuration section that settings are /// applied to. /// </summary> public class JsonFileConfigurationProvider<TAppConfiguration> : ConfigurationProviderBase<TAppConfiguration> where TAppConfiguration: AppConfiguration, new() { /// <summary> /// Optional - the Configuration file where configuration settings are /// stored in. If not specified uses the default Configuration Manager /// and its default store. /// </summary> public string JsonConfigurationFile { get { return _JsonConfigurationFile; } set { _JsonConfigurationFile = value; } } private string _JsonConfigurationFile = string.Empty; public override bool Read(AppConfiguration config) { var newConfig = JsonSerializationUtils.DeserializeFromFile(JsonConfigurationFile, typeof(TAppConfiguration)) as TAppConfiguration; if (newConfig == null) { if(Write(config)) return true; return false; } DecryptFields(newConfig); DataUtils.CopyObjectData(newConfig, config, "Provider,ErrorMessage"); return true; } /// <summary> /// Return /// </summary> /// <typeparam name="TAppConfig"></typeparam> /// <returns></returns> public override TAppConfig Read<TAppConfig>() { var result = JsonSerializationUtils.DeserializeFromFile(JsonConfigurationFile, typeof(TAppConfig)) as TAppConfig; if (result != null) DecryptFields(result); return result; } /// <summary> /// Write configuration to XmlConfigurationFile location /// </summary> /// <param name="config"></param> /// <returns></returns> public override bool Write(AppConfiguration config) { EncryptFields(config); bool result = JsonSerializationUtils.SerializeToFile(config, JsonConfigurationFile,false,true); // Have to decrypt again to make sure the properties are readable afterwards DecryptFields(config); return result; } }This incidentally demonstrates how easy it is to create a new provider for the West Wind Application Configuration component. Simply implementing 3 methods will do in most cases.Note this code doesn't have any dynamic dependencies - all that's abstracted away in the JsonSerializationUtils(). From here on, serializing JSON is just a matter of calling the static methods on the SerializationUtils class.Already, there are several other places in some other tools where I use JSON serialization this is coming in very handy. With a couple of lines of code I was able to add JSON.NET support to an older AJAX library that I use replacing quite a bit of code that was previously in use. And for any other manual JSON operations (in a couple of apps I use JSON Serialization for 'blob' like document storage) this is also going to be handy.Performance?Some of you might be thinking that using dynamic and Reflection can't be good for performance. And you'd be right… In performing some informal testing it looks like the performance of the native code is nearly twice as fast as the dynamic code. Most of the slowness is attributable to type lookups. To test I created a native class that uses an actual reference to JSON.NET and performance was consistently around 85-90% faster with the referenced code. This will change though depending on the size of objects serialized - the larger the object the more processing time is spent inside the actual dynamically activated components and the less difference there will be. Dynamic code is always slower, but how much it really affects your application primarily depends on how frequently the dynamic code is called in relation to the non-dynamic code executing. In most situations where dynamic code is used 'to get the process rolling' as I do here the overhead is small enough to not matter.All that being said though - I serialized 10,000 objects in 80ms vs. 45ms so this is hardly slouchy performance. For the configuration component speed is not that important because both read and write operations typically happen once on first access and then every once in a while. But for other operations - say a serializer trying to handle AJAX requests on a Web Server one would be well served to create a hard dependency.Dynamic Loading - Worth it?Dynamic loading is not something you need to worry about but on occasion dynamic loading makes sense. But there's a price to be paid in added code  and a performance hit which depends on how frequently the dynamic code is accessed. But for some operations that are not pivotal to a component or application and are only used under certain circumstances dynamic loading can be beneficial to avoid having to ship extra files adding dependencies and loading down distributions. These days when you create new projects in Visual Studio with 30 assemblies before you even add your own code, trying to keep file counts under control seems like a good idea. It's not the kind of thing you do on a regular basis, but when needed it can be a useful option in your toolset… © Rick Strahl, West Wind Technologies, 2005-2013Posted in .NET  C#   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Hype and LINQ

    - by Tony Davis
    "Tired of querying in antiquated SQL?" I blinked in astonishment when I saw this headline on the LinqPad site. Warming to its theme, the site suggests that what we need is to "kiss goodbye to SSMS", and instead use LINQ, a modern query language! Elsewhere, there is an article entitled "Why LINQ beats SQL". The designers of LINQ, along with many DBAs, would, I'm sure, cringe with embarrassment at the suggestion that LINQ and SQL are, in any sense, competitive ways of doing the same thing. In fact what LINQ really is, at last, is an efficient, declarative language for C# and VB programmers to access or manipulate data in objects, local data stores, ORMs, web services, data repositories, and, yes, even relational databases. The fact is that LINQ is essentially declarative programming in a .NET language, and so in many ways encourages developers into a "SQL-like" mindset, even though they are not directly writing SQL. In place of imperative logic and loops, it uses various expressions, operators and declarative logic to build up an "expression tree" describing only what data is required, not the operations to be performed to get it. This expression tree is then parsed by the language compiler, and the result, when used against a relational database, is a SQL string that, while perhaps not always perfect, is often correctly parameterized and certainly no less "optimal" than what is achieved when a developer applies blunt, imperative logic to the SQL language. From a developer standpoint, it is a mistake to consider LINQ simply as a substitute means of querying SQL Server. The strength of LINQ is that that can be used to access any data source, for which a LINQ provider exists. Microsoft supplies built-in providers to access not just SQL Server, but also XML documents, .NET objects, ADO.NET datasets, and Entity Framework elements. LINQ-to-Objects is particularly interesting in that it allows a declarative means to access and manipulate arrays, collections and so on. Furthermore, as Michael Sorens points out in his excellent article on LINQ, there a whole host of third-party LINQ providers, that offers a simple way to get at data in Excel, Google, Flickr and much more, without having to learn a new interface or language. Of course, the need to be generic enough to deal with a range of data sources, from something as mundane as a text file to as esoteric as a relational database, means that LINQ is a compromise and so has inherent limitations. However, it is a powerful and beautifully compact language and one that, at least in its "query syntax" guise, is accessible to developers and DBAs alike. Perhaps there is still hope that LINQ can fulfill Phil Factor's lobster-induced fantasy of a language that will allow us to "treat all data objects, whether Word files, Excel files, XML, relational databases, text files, HTML files, registry files, LDAPs, Outlook and so on, in the same logical way, as linked databases, and extract the metadata, create the entities and relationships in the same way, and use the same SQL syntax to interrogate, create, read, write and update them." Cheers, Tony.

    Read the article

  • Wireless Not Working on Ubuntu 10.10

    - by Promather
    I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with wireless LAN. It simply doesn't work! Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

    Read the article

  • USB drives not recognized all of a sudden (usb_storage not loaded lsmod does not report usb_storage)

    - by Siddharth
    I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. sudo lsusb results Bus.... skipped 4 lines Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 sudo dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Edit : jsiddharth@siddharth-desktop:~$ sudo udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing UDEV [4757.144372] add /module/usb_storage (module) UDEV [4757.146558] remove /module/usb_storage (module) UDEV [4757.148707] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6 (usb) UDEV [4757.149699] add /bus/usb/drivers/usb-storage (drivers) UDEV [4757.151214] remove /bus/usb/drivers/usb-storage (drivers) UDEV [4757.156873] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0 (usb) UDEV [4757.160903] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) UDEV [4757.164672] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165163] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165440] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) Narrowing down more : Seems like I need usb_storage to load as a module jsiddharth@siddharth-desktop:~$ lsmod | grep usb usbserial 37201 0 usbhid 41937 0 hid 77428 1 usbhid Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful.

    Read the article

  • Crash Report in Ubuntu... hardware problem?

    - by Andrew
    Got this on my machine. I was just browsing the web on Chrome and my computer froze. I recently just built this machine. I have a feeling it is a hardware problem... Possibly one of my parts arrived broken in some way.... Starting anac(h)ronistic cron Stopping anac(h)ronistic cron Stopping cold plug devices Stopping log initial device creation Starting enable remaining boot-time encrypted block devices Starting configure network device security Starting configure virtual network devices Starting save udev log and update rules Stopping configure virtual network devices Stopping save udev log and update rules Checking battery state... Stopping System V runlevel compatibility Stopping enable remaining boot-time encrypted block devices Stopping Mount filesystems on boot 91.573384] BUG: unable to handle kernel NULL pointer dereference at (null) 91.573437] IP: [<ffffffff81313514>] strcmp+0x14/0x30 91.573470] PGD 1f7822067 PUD 1ed7a6067 PMD 0 91.573498] Oops: 0000 [#1] SMP 91.573519] CPU 3 91.573531] Modules linked in: dm_crypt bnep snd_hda_codec_realtek rfcomm bluetooth parport_pc ppdev arc4 fglrx(P) rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib mac0021 cfg80211 psmouse snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer send_seq_device snd joydev mac_hid mei(C) soundcore serio_raw snd_page_alloc lp parport ses enclosure usbhid hid i915 drm_kms_helper drm i2c_algo_bit mxm_umi tg_video wmi usb_storage 91.573826] 91.573837] Pid: 2297, comm: update-notifier Tainted: P C O 3.2.0-29-generic #46-Ubuntu To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Extreme4 91.573912] RIP: 0010:[<ffffffff81313514>] [<ffffffff81313514>] strcmp+0x14/0x30 91.573954] RSP: 0018:ffff8801f83f5bb8 EFLAGS: 00010246 91.573982] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 91.574019] RDX: 0000000000000069 RSI: 0000000000000000 RDI: ffff88021adb26f8 91.574056] RBP: ffff8801f83f5bb8 R08: ffff88022f2d6e80 R09: 0000000000000000 91.574093] R10: ffff88021e7dbf00 R11: 0000000000000003 R12: ffff88021c10eb40 91.574130] R13: 0000000000000000 R14: ffff88021adb26f8 R15: ffff8801f83f5d40 91.574168] FS: 00007f958cf53940(0000) GS:ffff88022f2c0000(0000) kn1GS:0000000000000000 91.574210] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 91.574240] CR2: 0000000000000000 CR3: 000000021f6d7000 CR4: 00000000000406e0 91.574277] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 91.574314] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000000 91.574351] Process update-notifier (pid: 2297, threadinfo ffff801f83f4000, task ffff880208fe2e00) 91.574397] Stack: 91.574409] ffff8801f83f5be8 ffffffff811ed509 ffff88021adb26c0 ffff88021b8b7020 91.574453] ffff88021b461c60 fffffffffffffffe ffff8801f83f5c18 ffffffff811ed61f 91.574496] ffff88021adb26c0 ffff88021b8b7020 ffff8801f83f5dc8 0000000000000001 91.574539] Call Trace: 91.574558] [<ffffffff811ed509] sysfs_find_dirent+0x59/0x110 91.574591] [<ffffffff811ed61f] sysfs_lookup+0x5f/0x110 91.574621] [<ffffffff81182745] d_alloc_and_lookup+0x45/0x90 91.574654] [<ffffffff8118fe65] ? d_lookup+0x35/0x60 91.574683] [<ffffffff811848d2] do_lookup+0x202/0x310 91.574712] [<ffffffff8118660c] path_lookupat+0x11c/0x750 91.574744] [<ffffffff81318db7] ? __strncpy_from_user+0x27/0x60 91.574778] [<ffffffff81186c71] do_path_lookup+0x31/0xc0 91.574809] [<ffffffff81187779] user_path_at_empty+0x59/0xa0 91.574842] [<ffffffff81187822] ? do_filp_open+0x42/0xa0 91.574872] [<ffffffff811877d1] user_path_at+0x11/0x20 91.574902] [<ffffffff8117c80a] vfs_fstatat+0x3a/0x70 91.574933] [<ffffffff81161cff] ? kmem_cache_free+0x2f/0x110 91.574965] [<ffffffff8117c85e] vfs_lstat+-x31/0x70 91.574993] [<ffffffff8117c9fa] sys_newlstat+0x1a/0x40 91.575022] [<ffffffff81176ee1] ? do_sys_open+0x171/0x220 91.575053] [<ffffffff8117cb1a] ? sys_readlinkat+0x7a/0xb0 91.575086] [<ffffffff81661ec2] system_call_fastpath+0x16/0x1b 91.575118] Code: 83 c1 01 40 84 ff 75 ef 5d c3 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 00 55 31 c0 48 89 e5 66 2e 0f 1f 84 00 00 00 00 00 0f b6 14 07 <3a> 14 06 75 0f 48 83 c0 01 84 d2 75 ef 31 c0 5d c3 0f 1f 00 19 91.577243] RIP [<ffffffff81313514>] strcmp+0x14/0x30 91.579314] RSP <ffff8801f83f5bb8> 91.581385] CR2: 0000000000000000

    Read the article

  • Installing Age of Empires II using PlayOnLinux doesn't work?

    - by user70342
    I have tried installing age of empires 2 using PlayOnLinux, the installation appeared to go fine but when I try and open the game it says there is a serious fault. The error report is below, unfortunately this doesn't mean alot to me, I was wondering if you could help, a) By highlighting the problem and b) by suggesting a solution. Many Thanks Unhandled exception: page fault on read access to 0xffffffff in 32-bit code (0x0040aaad). Register dump: CS:0073 SS:007b DS:007b ES:007b FS:0033 GS:003b EIP:0040aaad ESP:0033fd00 EBP:0033fde4 EFLAGS:00010293( R- -- I S -A- -C) EAX:00000001 EBX:bde88d9d ECX:00000067 EDX:00400000 ESI:7b867c00 EDI:00400000 Stack dump: 0x0033fd00:00410fed 00000000 00400000 00000067 0x0033fd10:0041ab90 00130d8a 7b895848 7bc483b1 0x0033fd20:0044c800 00000002 0044bdd0 7bca4e6c 0x0033fd30:7bc3590f 00000800 00000094 00000005 0x0033fd40:00000000 00000893 00000002 76726553 0x0033fd50:20656369 6b636150 00003420 00000800 Backtrace: =0 0x0040aaad in empires2 (+0xaaad) (0x0033fde4) 1 0x0041ace2 in empires2 (+0x1ace1) (0x0033fe70) 2 0x7b85ac0c call_process_entry+0xb() in kernel32 (0x0033fe88) 3 0x7b85e13b in kernel32 (+0x4e13a) (0x0033fec8) 4 0x7bc714f0 call_thread_func_wrapper+0xb() in ntdll (0x0033fed8) 5 0x7bc7172d call_thread_func+0x7c() in ntdll (0x0033ffa8) 6 0x7bc714ce RtlRaiseException+0x21() in ntdll (0x0033ffc8) 7 0x7bc4c30e in ntdll (+0x3c30d) (0x0033ffe8) 0x0040aaad: pop %ss Modules: Module Address Debug info Name (51 modules) PE 400000- 44b000 Export empires2 PE 10000000-1000c000 Deferred drvmgt ELF 35cae000-35d24000 Deferred rpcrt4 -PE 35cc0000-35d24000 \ rpcrt4 ELF 68000000-68022000 Deferred ld-linux.so.2 ELF 68022000-681c7000 Deferred libc.so.6 ELF 681c7000-681cc000 Deferred libdl.so.2 ELF 681cc000-681f8000 Deferred libm.so.6 ELF 681f8000-68201000 Deferred libnss_compat.so.2 ELF 68201000-6821b000 Deferred libnsl.so.1 ELF 6821b000-68228000 Deferred libnss_files.so.2 ELF 68228000-68366000 Deferred user32 -PE 68240000-68366000 \ user32 ELF 68366000-68421000 Deferred gdi32 -PE 68370000-68421000 \ gdi32 ELF 68421000-68481000 Deferred advapi32 -PE 68430000-68481000 \ advapi32 ELF 68481000-68499000 Deferred version -PE 68490000-68499000 \ version ELF 68499000-68533000 Deferred libfreetype.so.6 ELF 68533000-68549000 Deferred libz.so.1 ELF 68549000-685db000 Deferred winex11 -PE 68550000-685db000 \ winex11 ELF 685db000-685e4000 Deferred libsm.so.6 ELF 685e4000-685fe000 Deferred libice.so.6 ELF 685fe000-68610000 Deferred libxext.so.6 ELF 68610000-68744000 Deferred libx11.so.6 ELF 68744000-6874a000 Deferred libuuid.so.1 ELF 6874a000-68751000 Deferred libxdmcp.so.6 ELF 68751000-68755000 Deferred libxinerama.so.1 ELF 68755000-6875b000 Deferred libxxf86vm.so.1 ELF 6875b000-68765000 Deferred libxrender.so.1 ELF 68765000-6876e000 Deferred libxrandr.so.2 ELF 6876e000-68772000 Deferred libxcomposite.so.1 ELF 68772000-68782000 Deferred libxi.so.6 ELF 68782000-687b6000 Deferred libfontconfig.so.1 ELF 687b6000-687e0000 Deferred libexpat.so.1 ELF 687e0000-687eb000 Deferred libxcursor.so.1 ELF 687eb000-687f1000 Deferred libxfixes.so.3 ELF 6f102000-6f10e000 Deferred libnss_nis.so.2 ELF 7194d000-7196e000 Deferred imm32 -PE 71950000-7196e000 \ imm32 ELF 72c76000-72db7000 Dwarf libwine.so.1 ELF 75d65000-75d86000 Deferred libxcb.so.1 ELF 79223000-79227000 Deferred libxau.so.6 ELF 7b800000-7b8f5000 Dwarf kernel32 -PE 7b810000-7b8f5000 \ kernel32 ELF 7bc00000-7bcc1000 Dwarf ntdll -PE 7bc10000-7bcc1000 \ ntdll ELF 7bf00000-7bf03000 Deferred ELF 7c708000-7c723000 Deferred libpthread.so.0 Threads: process tid prio (all id:s are in hex) 00000008 (D) C:\Program Files\Microsoft Games\Age of Empires II\empires2.exe 00000009 0 <== 0000000e services.exe 00000039 0 00000038 0 0000001f 0 00000019 0 00000018 0 00000017 0 00000015 0 00000010 0 0000000f 0 00000012 winedevice.exe 0000001e 0 0000001a 0 00000014 0 00000013 0 0000001b plugplay.exe 00000021 0 0000001d 0 0000001c 0 00000024 explorer.exe 00000025 0 00000035 winedevice.exe 0000003a 0 00000037 0 00000036 0 System information: Wine build: wine-1.4-rc1 Platform: i386 Host system: Linux Host version: 3.2.0-24-generic

    Read the article

  • Brightness Crash and Fan issues in 12.04.1

    - by S.A. McIntosh
    I would just like to state beforehand that I am a total novice in using Ubuntu when it comes to the more complex issues. So I thought it would be best to finally come here and ask for help before being re-directed or closed out for a solution. I have already looked high and low on this board for one but nothing came up for my particular case, so I might as well take a shot asking for the first time here. This is what I have at the moment: -Dell Insprion 1764 w/ 64-bit Intel i5 Core -Dual Boot: Windows 7/Ubuntu 12.04.1 32-bit (from 12.04 install) -Unity shell -Linux kernel: 3.2.0-32 generic-pae ...and this is my fglrxinfo: OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Mobility Radeon HD 5000 Series OpenGL version string: 4.2.11627 Compatibility Profile Context The one issue I have with using Ubuntu is brightness. With the driver in every time I use the slider in the brightness and lock settings or use the keyboard function, it freezes, goes black and comes up with a scrambled colors page like this in the video. So I have looked all over this board and the web for answers looking for a solution that might have an answer. This is what I have done so far to fix this: -First Solution: Looking around, I found this small fix using terminal: sudo gedit /etc/rc.local followed by adding this into "rc.local" echo # > /sys/class/backlight/acpi_video0/brightness This works rarely with the graphics driver still in and I often get lucky say during restart but reboot would only snap back the brightness at max. -Second Solution Simply remove the graphics driver while leaving the solution of first behind. This solves the issue but results in having the monitor flicker and flash at startup which in itself is not a problem to me but maybe not so good for monitor health. Also it causes the fan to speed up throughout the session and render any program that needs the driver useless. -Third Solution This is the most obvious. Just simply use the brightness on AMD Catalyst Control Center software that came with the driver, and I can say that it's form of brightness is HORRIBLE compared to the actual settings. Which leads up to where I am now, back to the driver to stop the fan speed-up and seems that the only solution to the brightness crash is to use the keyboard-controlled brightness at the login screen NOT the desktop if I want the issued effect but will just snap at max bright again if I restart. Fan speed problem is dealt with but now run the risk of crashing my computer if I so much touch the brightness settings. Speaking of which I found this on launchpad and it seems that the issue has been going far since June of 2012. Any help, redirect link or reference would be greatly appreciated. Thank you.

    Read the article

  • Should CSS be listed on your resume under Languages?

    - by Sandeepan Nath
    I have some doubts like Whether CSS should be put under Languages or not? Although Wikipedia says Cascading Style Sheets (CSS) is a style sheet language ... But do they write CSS under the languages section of the resume, along with PHP, etc? Similarly what about HTML? I have some doubt and I don't want to sound like someone who is not aware of the trends. Just to give an example, currently I have the following languages,frameworks, technologies, etc. listed under the "Technical Expertise" section of my resume - Technical Expertise * Languages - Proficient - PHP 5, Javascript, HTML ?*,CSS ?*,Sass ?*. Beginner - Linux Bash. * Databases - MySQL 5. * Technologies - AJAX. * Frameworks/Libraries - Symfony, jQuery. * CMSes - Wordpress. Although my domain is Web-development/design, I welcome domain-agnostic answers which can provide some generic ideas/reasoning. I have seen, a lot of people messing up these sections (even more serious than my doubts :) ), putting things under wrong sub-headings and thus putting a big question mark on their understanding of those things. I don't know much about XML, Comet Technology etc. Considering those are included too, What things should be put under Languages? E.g. Should CSS be put under Languages? Please give some reasoning to support your views. Where should the others (XML, Comet, cURL etc. ) be put? I welcome some examples of how you put it. Or do you have an additional Keywords section where you write all the unsortables ? Considering a set of standards like W3C standards, etc. do you have a standards sub-heading? I guess I have put the contents of other sections Okay. But do let me know about your ideas and reasoning. After all, I understand there may not be a single answer to this, but let's see what is the trend. Thanks Updates Further, do you mention design patters you have used? Web Services etc.? Where do you mention SOAP, XML etc...

    Read the article

  • Which statically typed languages support intersection types for function return values?

    - by stakx
    Initial note: This question got closed after several edits because I lacked the proper terminology to state accurately what I was looking for. Sam Tobin-Hochstadt then posted a comment which made me recognise exactly what that was: programming languages that support intersection types for function return values. Now that the question has been re-opened, I've decided to improve it by rewriting it in a (hopefully) more precise manner. Therefore, some answers and comments below might no longer make sense because they refer to previous edits. (Please see the question's edit history in such cases.) Are there any popular statically & strongly typed programming languages (such as Haskell, generic Java, C#, F#, etc.) that support intersection types for function return values? If so, which, and how? (If I'm honest, I would really love to see someone demonstrate a way how to express intersection types in a mainstream language such as C# or Java.) I'll give a quick example of what intersection types might look like, using some pseudocode similar to C#: interface IX { … } interface IY { … } interface IB { … } class A : IX, IY { … } class B : IX, IY, IB { … } T fn() where T : IX, IY { return … ? new A() : new B(); } That is, the function fn returns an instance of some type T, of which the caller knows only that it implements interfaces IX and IY. (That is, unlike with generics, the caller doesn't get to choose the concrete type of T — the function does. From this I would suppose that T is in fact not a universal type, but an existential type.) P.S.: I'm aware that one could simply define a interface IXY : IX, IY and change the return type of fn to IXY. However, that is not really the same thing, because often you cannot bolt on an additional interface IXY to a previously defined type A which only implements IX and IY separately. Footnote: Some resources about intersection types: Wikipedia article for "Type system" has a subsection about intersection types. Report by Benjamin C. Pierce (1991), "Programming With Intersection Types, Union Types, and Polymorphism" David P. Cunningham (2005), "Intersection types in practice", which contains a case study about the Forsythe language, which is mentioned in the Wikipedia article. A Stack Overflow question, "Union types and intersection types" which got several good answers, among them this one which gives a pseudocode example of intersection types similar to mine above.

    Read the article

  • Hardware and Software Working Together - What Does LJE say?

    - by Stephen Slade
     IDG News Service - Oracle CEO Larry Ellison said Oracle will continue to bet on selling high-end custom hardware for its software products, even amidst a growing trend toward roomfuls of cheap, generic servers. "You have to be in the hardware business and the software business, to get the best possible system," he said during a keynote speech at Oracle's OpenWorld conference in Tokyo. "We believe it's the right idea, we believe it's the next generation of computing, we believe all the pieces have to fit together." Ellison, as he has often done in the past, repeatedly referred to Apple as his "favorite example" of such tight integration. He was a close friend of Apple's co-founder Steve Jobs and previously served on Apple's board of directors.He said sales of Oracle's advanced servers were booming and generating around a billion dollars a year in revenue for the company, which has until recent years focused almost exclusively on its software offerings. With the explosion of popular online services and the increasing number of mobile devices that access them, demand is high for databases that can quickly respond to high numbers of relatively simple queries. While Oracle is pitching its expensive, finely-tuned machines to meet this requirement, Internet behemoths like Google, Facebook and Microsoft increasingly rely on armies of low-cost, easily replaceable servers. Ellison emphasized the high specifications of Oracle's servers, which come packed with multiple terabytes of RAM and flash-based storage for speed. Such machines are superior to large server farms, he said, because they require far less electricity and floor space, and are also cost competitive. When asked about whether purchasing such products would lock customers in to expensive hardware from Oracle, he promised that the company's software would always run on "multiple hardware sources."  Ellison, who spoke from Kyoto, Japan's ancient capital, was shown live online via webcast. The Oracle founder has a fondness for Japanese architecture and is staying in his large garden residence in the city Source: Ellison: Hardware-software integration key, Apple is best example. Oracle's founder and CEO reaffirmed his commitment to custom hardware for its software products  LINK to Computerworld article Apr 5, 2012 http://www.computerworld.com/s/article/9225858/Ellison_Hardware_software_integration_key_Apple_is_best_example?source=CTWNLE_nlt_entsoft_2012-04-09&utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+computerworld%2Fs%2Ffeed%2Ftopic%2F173+%28Computerworld+Databases+News%29#disqus_thread

    Read the article

  • IRM and Consumerization

    - by martin.abrahams
    As the season of rampant consumerism draws to its official close on 12th Night, it seems a fitting time to discuss consumerization - whereby technologies from the consumer market, such as the Android and iPad, are adopted by business organizations. I expect many of you will have received a shiny new mobile gadget for Christmas - and will be expecting to use it for work as well as leisure in 2011. In my case, I'm just getting to grips with my first Android phone. This trend developed so much during 2010 that a number of my customers have officially changed their stance on consumer devices - accepting consumerization as something to embrace rather than resist. Clearly, consumerization has significant implications for information control, as corporate data is distributed to consumer devices whether the organization is aware of it or not. I daresay that some DLP solutions can limit distribution to some extent, but this creates a conflict between accepting consumerization and frustrating it. So what does Oracle IRM have to offer the consumerized enterprise? First and foremost, consumerization does not automatically represent great additional risk - if an enterprise seals its sensitive information. Sealed files are encrypted, and that fundamental protection is not affected by copying files to consumer devices. A device might be lost or stolen, and the user might not think to report the loss of a personally owned device, but the data and the enterprise that owns it are protected. Indeed, the consumerization trend is another strong reason for enterprises to deploy IRM - to protect against this expansion of channels by which data might be accidentally exposed. It also enables encryption requirements to be met even though the enterprise does not own the device and cannot enforce device encryption. Moving on to the usage of sealed content on such devices, some of our customers are using virtual desktop solutions such that, in truth, the sealed content is being opened and used on a PC in the normal way, and the user is simply using their device for display purposes. This has several advantages: The sensitive documents are not actually on the devices, so device loss and theft are even less of a worry The enterprise has another layer of control over how and where content is used, as access to the virtual solution involves another layer of authentication and authorization - defence in depth It is a generic solution that means the enterprise does not need to actively support the ever expanding variety of consumer devices - the enterprise just manages some virtual access to traditional systems using something like Citrix or Remote Desktop services. It is a tried and tested way of accessing sealed documents. People have being using Oracle IRM in conjunction with Citrix and Remote Desktop for several years. For some scenarios, we also have the "IRM wrapper" option that provides a simple app for sealing and unsealing content on a range of operating systems. We are busy working on other ways to support the explosion of consumer devices, but this blog is not a proper forum for talking about them at this time. If you are an Oracle IRM customer, we will be pleased to discuss our plans and your requirements with you directly on request. You can be sure that the blog will cover the new capabilities as soon as possible.

    Read the article

  • Sorting and Filtering By Model-Based LOV Display Value

    - by Steven Davelaar
    If you use a model-based LOV and you use display type "choice", then ADF nicely displays the display value, even if the table is read-only. In the screen shot below, you see the RegionName attribute displayed instead of the RegionId. This is accomplished by the model-based LOV, I did not modify the Countries view object to include a join with Regions.  Also note the sort icon, the table is sorted by RegionId. This sorting typically results in a bug reported by your test team. Europe really shouldn't come before America when sorting ascending, right? To fix this, we could of course change the Countries view object query and add a join with the Regions table to include the RegionName attribute. If the table is updateable, we still need the choice list, so we need to move the model-based LOV from the RegionId attribute to the RegionName attribute and hide the RegionId attribute in the table. But that is a lot of work for such a simple requirement, in particular if we have lots of model-based choice lists in our view object. Fortunately, there is an easier way to do this, with some generic code in your view object base class that fixes this at once for all model-based choice lists that we have defined in our application. The trick is to override the method getSortCriteria() in the base view object class. By default, this method returns null because the sorting is done in the database through a SQL Order By clause. However, if the getSortCriteria method does return a sort criteria the framework will perform in memory sorting which is what we need to achieve sorting by region name. So, inside this method we need to evaluate the Order By clause, and if the order by column matches an attribute that has a model-based LOV choicelist defined with a display attribute that is different from the value attribute, we need to return a sort criterria. Here is the complete code of this method: public SortCriteria[] getSortCriteria() {   String orderBy = getOrderByClause();          if (orderBy!=null )   {     boolean descending = false;     if (orderBy.endsWith(" DESC"))      {       descending = true;       orderBy = orderBy.substring(0,orderBy.length()-5);     }     // extract column name, is part after the dot     int dotpos = orderBy.lastIndexOf(".");     String columnName = orderBy.substring(dotpos+1);     // loop over attributes and find matching attribute     AttributeDef orderByAttrDef = null;     for (AttributeDef attrDef : getAttributeDefs())     {       if (columnName.equals(attrDef.getColumnName()))       {         orderByAttrDef = attrDef;         break;       }     }     if (orderByAttrDef!=null && "choice".equals(orderByAttrDef.getProperty("CONTROLTYPE"))          && orderByAttrDef.getListBindingDef()!=null)     {       String orderbyAttr = orderByAttrDef.getName();       String[] displayAttrs = orderByAttrDef.getListBindingDef().getListDisplayAttrNames();       String[] listAttrs = orderByAttrDef.getListBindingDef().getListAttrNames();       // if first list display attributes is not the same as first list attribute, than the value       // displayed is different from the value copied back to the order by attribute, in which case we need to       // use our custom comparator       if (displayAttrs!=null && listAttrs!=null && displayAttrs.length>0 && !displayAttrs[0].equals(listAttrs[0]))       {                  SortCriteriaImpl sc1 = new SortCriteriaImpl(orderbyAttr, descending);         SortCriteria[] sc = new SortCriteriaImpl[]{sc1};         return sc;                           }     }     }   return super.getSortCriteria(); } If this method returns a sort criteria, then the framework will call the sort method on the view object. The sort method uses a Comparator object to determine the sequence in which the rows should be returned. This comparator is retrieved by calling the getRowComparator method on the view object. So, to ensure sorting by our display value, we need to override this method to return our custom comparator: public Comparator getRowComparator() {   return new LovDisplayAttributeRowComparator(getSortCriteria()); } The custom comparator class extends the default RowComparator class and overrides the method compareRows and looks up the choice display value to compare the two rows. The complete code of this class is included in the sample application.  With this code in place, clicking on the Region sort icon nicely sorts the countries by RegionName, as you can see below. When using the Query-By-Example table filter at the top of the table, you typically want to use the same choice list to filter the rows. One way to do that is documented in ADF code corner sample 16 - How To Customize the ADF Faces Table Filter.The solution in this sample is perfectly fine to use. This sample requires you to define a separate iterator binding and associated tree binding to populate the choice list in the table filter area using the af:iterator tag. You might be able to reuse the same LOV view object instance in this iterator binding that is used as view accessor for the model-bassed LOV. However, I have seen quite a few customers who have a generic LOV view object (mapped to one "refcodes" table) with the bind variable values set in the LOV view accessor. In such a scenario, some duplicate work is needed to get a dedicated view object instance with the correct bind variables that can be used in the iterator binding. Looking for ways to maximize reuse, wouldn't it be nice if we could just reuse our model-based LOV to populate this filter choice list? Well we can. Here are the basic steps: 1. Create an attribute list binding in the page definition that we can use to retrieve the list of SelectItems needed to populate the choice list <list StaticList="false" Uses="LOV_RegionId"               IterBinding="CountriesView1Iterator" id="RegionId"/>  We need this "current row" list binding because the implicit list binding used by the item in the table is not accessible outside a table row, we cannot use the expression #{row.bindings.RegionId} in the table filter facet. 2. Create a Map-style managed bean with the get method retrieving the list binding as key, and returning the list of SelectItems. To return this list, we take the list of selectItems contained by the list binding and replace the index number that is normally used as key value with the actual attribute value that is set by the choice list. Here is the code of the get method:  public Object get(Object key) {   if (key instanceof FacesCtrlListBinding)   {     // we need to cast to internal class FacesCtrlListBinding rather than JUCtrlListBinding to     // be able to call getItems method. To prevent this import, we could evaluate an EL expression     // to get the list of items     FacesCtrlListBinding lb = (FacesCtrlListBinding) key;     if (cachedFilterLists.containsKey(lb.getName()))     {       return cachedFilterLists.get(lb.getName());     }     List<SelectItem> items = (List<SelectItem>)lb.getItems();     if (items==null || items.size()==0)     {       return items;     }     List<SelectItem> newItems = new ArrayList<SelectItem>();     JUCtrlValueDef def = ((JUCtrlValueDef)lb.getDef());     String valueAttr = def.getFirstAttrName();     // the items list has an index number as value, we need to replace this with the actual     // value of the attribute that is copied back by the choice list     for (int i = 0; i < items.size(); i++)     {       SelectItem si = (SelectItem) items.get(i);       Object value = lb.getValueFromList(i);       if (value instanceof Row)       {         Row row = (Row) value;         si.setValue(row.getAttribute(valueAttr));                 }       else       {         // this is the "empty" row, set value to empty string so all rows will be returned         // as user no longer wants to filter on this attribute         si.setValue("");       }       newItems.add(si);     }     cachedFilterLists.put(lb.getName(), newItems);     return newItems;   }   return null; } Note that we added caching to speed up performance, and to handle the situation where table filters or search criteria are set such that no rows are retrieved in the table. When there are no rows, there is no current row and the getItems method on the list binding will return no items.  An alternative approach to create the list of SelectItems would be to retrieve the iterator binding from the list binding and loop over the rows in the iterator binding rowset. Then we wouldn't need the import of the ADF internal oracle.adfinternal.view.faces.model.binding.FacesCtrlListBinding class, but then we need to figure out the display attributes from the list binding definition, and possible separate them with a dash if multiple display attributes are defined in the LOV. Doable but less reuse and more work. 3. Inside the filter facet for the column create an af:selectOneChoice with the value property of the f:selectItems tag referencing the get method of the managed bean:  <f:facet name="filter">   <af:selectOneChoice id="soc0" autoSubmit="true"                       value="#{vs.filterCriteria.RegionId}">     <!-- attention: the RegionId list binding must be created manually in the page definition! -->                       <f:selectItems id="si0"                    value="#{viewScope.TableFilterChoiceList[bindings.RegionId]}"/>   </af:selectOneChoice> </f:facet> Note that the managed bean is defined in viewScope for the caching to take effect. Here is a screen shot of the tabe filter in action: You can download the sample application here. 

    Read the article

  • Can't install "cedar trail drm driver in DKMS format" on Ubuntu 12.04

    - by Mychal Phillip Segala Sajulga
    Ubuntu 12.04 32bit ... Toshiba NB520 *side-note, this computer is so slow even with a 2gbram; far better than my emachine and neo laptop. I think this is the answer: driver. /var/log/jockey.log 2013-09-19 05:29:36,773 DEBUG: Comparing 3.8.0-29 with 2013-09-19 05:32:45,094 DEBUG: updating <jockey.detection.LocalKernelModulesDriverDB instance at 0x8427a0c> 2013-09-19 05:32:50,861 DEBUG: reading modalias file /lib/modules/3.8.0-29-generic/modules.alias 2013-09-19 05:32:56,240 DEBUG: reading modalias file /usr/share/jockey/modaliases/b43 2013-09-19 05:32:56,265 DEBUG: reading modalias file /usr/share/jockey/modaliases/disable-upstream-nvidia 2013-09-19 05:32:56,474 DEBUG: loading custom handler /usr/share/jockey/handlers/dvb_usb_firmware.py 2013-09-19 05:32:56,791 DEBUG: Instantiated Handler subclass __builtin__.DvbUsbFirmwareHandler from name DvbUsbFirmwareHandler 2013-09-19 05:32:56,792 DEBUG: Firmware for DVB cards not available 2013-09-19 05:32:56,793 DEBUG: loading custom handler /usr/share/jockey/handlers/cdv.py 2013-09-19 05:32:56,927 WARNING: modinfo for module cedarview_gfx failed: ERROR: modinfo: could not find module cedarview_gfx 2013-09-19 05:32:58,213 DEBUG: linux-lts-raring installed: True linux-lts-saucy installed: False linux minor version: 8 xserver ABI: 13 xserver-lts-quantal: False 2013-09-19 05:32:58,214 DEBUG: Instantiated Handler subclass __builtin__.CdvDriver from name CdvDriver 2013-09-19 05:32:58,214 DEBUG: cdv.available: falling back to default 2013-09-19 05:32:58,685 DEBUG: XorgDriverHandler(cedarview_gfx, cedarview-graphics-drivers, None): Disabling as package video ABI(s) xorg-video-abi-11 not compatible with X.org video ABI xorg-video-abi-13 2013-09-19 05:32:58,686 DEBUG: Intel Cedarview graphics driver not available 2013-09-19 05:32:58,687 DEBUG: loading custom handler /usr/share/jockey/handlers/vmware-client.py 2013-09-19 05:32:58,716 WARNING: modinfo for module vmxnet failed: ERROR: modinfo: could not find module vmxnet 2013-09-19 05:32:58,717 DEBUG: Instantiated Handler subclass __builtin__.VmwareClientHandler from name VmwareClientHandler 2013-09-19 05:32:58,758 DEBUG: VMWare Client Tools availability undetermined, adding to pool 2013-09-19 05:32:58,758 DEBUG: loading custom handler /usr/share/jockey/handlers/nvidia.py 2013-09-19 05:32:58,826 WARNING: modinfo for module nvidia_304 failed: ERROR: modinfo: could not find module nvidia_304 2013-09-19 05:32:58,836 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriver304 from name NvidiaDriver304 2013-09-19 05:32:58,837 DEBUG: nvidia.available: falling back to default 2013-09-19 05:33:11,682 DEBUG: NVIDIA accelerated graphics driver availability undetermined, adding to pool 2013-09-19 05:33:11,688 WARNING: modinfo for module nvidia_304_updates failed: ERROR: modinfo: could not find module nvidia_304_updates 2013-09-19 05:33:11,696 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriver304Updates from name NvidiaDriver304Updates 2013-09-19 05:33:11,696 DEBUG: nvidia.available: falling back to default 2013-09-19 05:33:24,326 DEBUG: NVIDIA accelerated graphics driver (post-release updates) availability undetermined, adding to pool 2013-09-19 05:33:24,332 WARNING: modinfo for module nvidia_current_updates failed: ERROR: modinfo: could not find module nvidia_current_updates 2013-09-19 05:33:24,339 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriverCurrentUpdates from name NvidiaDriverCurrentUpdates 2013-09-19 05:33:24,340 DEBUG: nvidia.available: falling back to default 2013-09-19 05:33:24,381 DEBUG: NVIDIA accelerated graphics driver (post-release updates) not available 2013-09-19 05:33:24,387 WARNING: modinfo for module nvidia_experimental_304 failed: ERROR: modinfo: could not find module nvidia_experimental_304 2013-09-19 05:33:24,427 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriverExperimental304 from name NvidiaDriverExperimental304 2013-09-19 05:33:24,427 DEBUG: nvidia.available: falling back to default 2013-09-19 05:33:24,461 DEBUG: NVIDIA accelerated graphics driver (**experimental** beta) not available 2013-09-19 05:33:24,467 WARNING: modinfo for module nvidia_current failed: ERROR: modinfo: could not find module nvidia_current

    Read the article

  • Action delegate in C#

    - by Jalpesh P. Vadgama
    In last few posts about I have written lots of things about delegates and this post is also part of that series. In this post we are going to learn about Action delegates in C#.  Following is a list of post related to delegates. Delegates in C#. Multicast Delegates in C#. Func Delegates in C#. Action Delegates in c#: As per MSDN action delegates used to pass a method as parameter without explicitly declaring custom delegates. Action Delegates are used to encapsulate method that does not have return value. C# 4.0 Action delegates have following different variants like following. It can take up to 16 parameters. Action – It will be no parameter and does not return any value. Action(T) Action(T1,T2) Action(T1,T2,T3) Action(T1,T2,T3,T4) Action(T1,T2,T3,T4,T5) Action(T1,T2,T3,T4,T5,T6) Action(T1,T2,T3,T4,T5,T6,T7) Action(T1,T2,T3,T4,T5,T6,T7,T8) Action(T1,T2,T3,T4,T5,T6,T7,T8,T9) Action(T1,T2,T3,T4,T5,T6,T7,T8,T9,T10) Action(T1,T2,T3,T4,T5,T6,T7,T8,T9,T10,T11) Action(T1,T2,T3,T4,T5,T6,T7,T8,T9,T10,T11,T12) Action(T1,T2,T3,T4,T5,T6,T7,T8,T9,T10,T11,T12,T13) Action(T1,T2,T3,T4,T5,T6,T7,T8,T9,T10,T11,T12,T13,T14) Action(T1,T2,T3,T4,T5,T6,T7,T8,T9,T10,T11,T12,T13,T14,T15) Action(T1,T2,T3,T4,T5,T6,T7,T8,T9,T10,T11,T12,T13,T14,T15,T16) So for this Action delegate you can have up to 16 parameters for Action.  Sound interesting!!… Enough theory now. It’s time to implement real code. Following is a code for that. using System; using System.Collections.Generic; namespace DelegateExample { class Program { static void Main(string[] args) { Action<String> Print = p => Console.WriteLine(p); Action<String,String> PrintAnother = (p1,p2)=> Console.WriteLine(string.Format("{0} {1}",p1,p2)); Print("Hello"); PrintAnother("Hello","World"); } } } In the above code you can see that I have created two Action delegate Print and PrintAnother. Print have one string parameter and its printing that. While PrintAnother have two string parameter and printing both the strings via Console.Writeline. Now it’s time to run example and following is the output as expected. That’s it. Hope you liked it. Stay tuned for more updates!!

    Read the article

< Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >