Search Results

Search found 27585 results on 1104 pages for 'url action'.

Page 178/1104 | < Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >

  • Using WeakReference to resolve issue with .NET unregistered event handlers causing memory leaks.

    - by Eric
    The problem: Registered event handlers create a reference from the event to the event handler's instance. If that instance fails to unregister the event handler (via Dispose, presumably), then the instance memory will not be freed by the garbage collector. Example: class Foo { public event Action AnEvent; public void DoEvent() { if (AnEvent != null) AnEvent(); } } class Bar { public Bar(Foo l) { l.AnEvent += l_AnEvent; } void l_AnEvent() { } } If I instantiate a Foo, and pass this to a new Bar constructor, then let go of the Bar object, it will not be freed by the garbage collector because of the AnEvent registration. I consider this a memory leak, and seems just like my old C++ days. I can, of course, make Bar IDisposable, unregister the event in the Dispose() method, and make sure to call Dispose() on instances of it, but why should I have to do this? I first question why events are implemented with strong references? Why not use weak references? An event is used to abstractly notify an object of changes in another object. It seems to me that if the event handler's instance is no longer in use (i.e., there are no non-event references to the object), then any events that it is registered with should automatically be unregistered. What am I missing? I have looked at WeakEventManager. Wow, what a pain. Not only is it very difficult to use, but its documentation is inadequate (see http://msdn.microsoft.com/en-us/library/system.windows.weakeventmanager.aspx -- noticing the "Notes to Inheritors" section that has 6 vaguely described bullets). I have seen other discussions in various places, but nothing I felt I could use. I propose a simpler solution based on WeakReference, as described here. My question is: Does this not meet the requirements with significantly less complexity? To use the solution, the above code is modified as follows: class Foo { public WeakReferenceEvent AnEvent = new WeakReferenceEvent(); internal void DoEvent() { AnEvent.Invoke(); } } class Bar { public Bar(Foo l) { l.AnEvent += l_AnEvent; } void l_AnEvent() { } } Notice two things: 1. The Foo class is modified in two ways: The event is replaced with an instance of WeakReferenceEvent, shown below; and the invocation of the event is changed. 2. The Bar class is UNCHANGED. No need to subclass WeakEventManager, implement IWeakEventListener, etc. OK, so on to the implementation of WeakReferenceEvent. This is shown here. Note that it uses the generic WeakReference that I borrowed from here: http://damieng.com/blog/2006/08/01/implementingweakreferencet I had to add Equals() and GetHashCode() to his class, which I include below for reference. class WeakReferenceEvent { public static WeakReferenceEvent operator +(WeakReferenceEvent wre, Action handler) { wre._delegates.Add(new WeakReference<Action>(handler)); return wre; } public static WeakReferenceEvent operator -(WeakReferenceEvent wre, Action handler) { foreach (var del in wre._delegates) if (del.Target == handler) { wre._delegates.Remove(del); return wre; } return wre; } HashSet<WeakReference<Action>> _delegates = new HashSet<WeakReference<Action>>(); internal void Invoke() { HashSet<WeakReference<Action>> toRemove = null; foreach (var del in _delegates) { if (del.IsAlive) del.Target(); else { if (toRemove == null) toRemove = new HashSet<WeakReference<Action>>(); toRemove.Add(del); } } if (toRemove != null) foreach (var del in toRemove) _delegates.Remove(del); } } public class WeakReference<T> : IDisposable { private GCHandle handle; private bool trackResurrection; public WeakReference(T target) : this(target, false) { } public WeakReference(T target, bool trackResurrection) { this.trackResurrection = trackResurrection; this.Target = target; } ~WeakReference() { Dispose(); } public void Dispose() { handle.Free(); GC.SuppressFinalize(this); } public virtual bool IsAlive { get { return (handle.Target != null); } } public virtual bool TrackResurrection { get { return this.trackResurrection; } } public virtual T Target { get { object o = handle.Target; if ((o == null) || (!(o is T))) return default(T); else return (T)o; } set { handle = GCHandle.Alloc(value, this.trackResurrection ? GCHandleType.WeakTrackResurrection : GCHandleType.Weak); } } public override bool Equals(object obj) { var other = obj as WeakReference<T>; return other != null && Target.Equals(other.Target); } public override int GetHashCode() { return Target.GetHashCode(); } } It's functionality is trivial. I override operator + and - to get the += and -= syntactic sugar matching events. These create WeakReferences to the Action delegate. This allows the garbage collector to free the event target object (Bar in this example) when nobody else is holding on to it. In the Invoke() method, simply run through the weak references and call their Target Action. If any dead (i.e., garbage collected) references are found, remove them from the list. Of course, this only works with delegates of type Action. I tried making this generic, but ran into the missing where T : delegate in C#! As an alternative, simply modify class WeakReferenceEvent to be a WeakReferenceEvent, and replace the Action with Action. Fix the compiler errors and you have a class that can be used like so: class Foo { public WeakReferenceEvent<int> AnEvent = new WeakReferenceEvent<int>(); internal void DoEvent() { AnEvent.Invoke(5); } } Hopefully this will help someone else when they run into the mystery .NET event memory leak!

    Read the article

  • Search function fails because it refers to the wrong controller action?

    - by Christoffer
    My Sunspot search function (sunspot_rails gem) works just fine in my index view, but when I duplicate it to my show view my search breaks... views/supplierproducts/show.html.erb <%= form_tag supplierproducts_path, :method => :get, :id => "supplierproducts_search" do %> <p> <%= text_field_tag :search, params[:search], placeholder: "Search by SKU, product name & EAN number..." %> </p> <div id="supplierproducts"><%= render 'supplierproducts' %></div> <% end %> assets/javascripts/application.js $(function () { $('#supplierproducts th a').live('click', function () { $.getScript(this.href); return false; } ); $('#supplierproducts_search input').keyup(function () { $.get($("#supplierproducts_search").attr("action"), $("#supplierproducts_search").serialize(), null, 'script'); return false; }); }); views/supplierproducts/show.js.erb $('#supplierproducts').html('<%= escape_javascript(render("supplierproducts")) %>'); views/supplierproducts/_supplierproducts.hmtl.erb <%= hidden_field_tag :direction, params[:direction] %> <%= hidden_field_tag :sort, params[:sort] %> <table class="table table-bordered"> <thead> <tr> <th><%= sortable "sku", "SKU" %></th> <th><%= sortable "name", "Product name" %></th> <th><%= sortable "stock", "Stock" %></th> <th><%= sortable "price", "Price" %></th> <th><%= sortable "ean", "EAN number" %></th> </tr> </thead> <% for supplierproduct in @supplier.supplierproducts %> <tbody> <tr> <td><%= supplierproduct.sku %></td> <td><%= supplierproduct.name %></td> <td><%= supplierproduct.stock %></td> <td><%= supplierproduct.price %></td> <td><%= supplierproduct.ean %></td> </tr> </tbody> <% end %> </table> controllers/supplierproducts_controller.rb class SupplierproductsController < ApplicationController helper_method :sort_column, :sort_direction def show @supplier = Supplier.find(params[:id]) @search = @supplier.supplierproducts.search do fulltext params[:search] end @supplierproducts = @search.results end end private def sort_column Supplierproduct.column_names.include?(params[:sort]) ? params[:sort] : "name" end def sort_direction %w[asc desc].include?(params[:direction]) ? params[:direction] : "asc" end models/supplierproduct.rb class Supplierproduct < ActiveRecord::Base attr_accessible :ean, :name, :price, :sku, :stock, :supplier_id belongs_to :supplier validates :supplier_id, presence: true searchable do text :ean, :name, :sku end end Visiting show.html.erb works just fine. Log shows: Started GET "/supplierproducts/2" for 127.0.0.1 at 2012-06-24 13:44:52 +0200 Processing by SupplierproductsController#show as HTML Parameters: {"id"=>"2"} Supplier Load (0.1ms) SELECT "suppliers".* FROM "suppliers" WHERE "suppliers"."id" = ? LIMIT 1 [["id", "2"]] SOLR Request (252.9ms) [ path=#<RSolr::Client:0x007fa5880b8e68> parameters={data: fq=type%3ASupplierproduct&start=0&rows=30&q=%2A%3A%2A, method: post, params: {:wt=>:ruby}, query: wt=ruby, headers: {"Content-Type"=>"application/x-www-form-urlencoded; charset=UTF-8"}, path: select, uri: http://localhost:8982/solr/select?wt=ruby, open_timeout: , read_timeout: } ] Supplierproduct Load (0.2ms) SELECT "supplierproducts".* FROM "supplierproducts" WHERE "supplierproducts"."id" IN (1) Supplierproduct Load (0.1ms) SELECT "supplierproducts".* FROM "supplierproducts" WHERE "supplierproducts"."supplier_id" = 2 Rendered supplierproducts/_supplierproducts.html.erb (2.2ms) Rendered supplierproducts/show.html.erb within layouts/application (3.3ms) Rendered layouts/_shim.html.erb (0.0ms) User Load (0.1ms) SELECT "users".* FROM "users" WHERE "users"."remember_token" = 'zMrtTbDun2MjMHRApSthCQ' LIMIT 1 Rendered layouts/_header.html.erb (2.1ms) Rendered layouts/_footer.html.erb (0.2ms) Completed 200 OK in 278ms (Views: 20.6ms | ActiveRecord: 0.6ms | Solr: 252.9ms) But it breaks when I type in a search. Log shows: Started GET "/supplierproducts?utf8=%E2%9C%93&search=a&direction=&sort=&_=1340538830635" for 127.0.0.1 at 2012-06-24 13:53:50 +0200 Processing by SupplierproductsController#index as JS Parameters: {"utf8"=>"?", "search"=>"a", "direction"=>"", "sort"=>"", "_"=>"1340538830635"} Rendered supplierproducts/_supplierproducts.html.erb (2.4ms) Rendered supplierproducts/index.js.erb (2.9ms) Completed 500 Internal Server Error in 6ms ActionView::Template::Error (undefined method `supplierproducts' for nil:NilClass): 10: <th><%= sortable "ean", "EAN number" %></th> 11: </tr> 12: </thead> 13: <% for supplierproduct in @supplier.supplierproducts %> 14: <tbody> 15: <tr> 16: <td><%= supplierproduct.sku %></td> app/views/supplierproducts/_supplierproducts.html.erb:13:in `_app_views_supplierproducts__supplierproducts_html_erb___2251600857885474606_70174444831200' app/views/supplierproducts/index.js.erb:1:in `_app_views_supplierproducts_index_js_erb___1613906916161905600_70174464073480' Rendered /Users/Computer/.rvm/gems/ruby-1.9.3-p194@myapp/gems/actionpack-3.2.3/lib/action_dispatch/middleware/templates/rescues/_trace.erb (33.3ms) Rendered /Users/Computer/.rvm/gems/ruby-1.9.3-p194@myapp/gems/actionpack-3.2.3/lib/action_dispatch/middleware/templates/rescues/_request_and_response.erb (0.9ms) Rendered /Users/Computer/.rvm/gems/ruby-1.9.3-p194@myapp/gems/actionpack-3.2.3/lib/action_dispatch/middleware/templates/rescues/template_error.erb within rescues/layout (39.7ms)

    Read the article

  • Include weather information in ASP.Net site from weather.com services

    - by sreejukg
    In this article, I am going to demonstrate how you can use the XMLOAP services (referred as XOAP from here onwards) provided by weather.com to display the weather information in your website. The XOAP services are available to be used for free of charge, provided you are comply with requirements from weather.com. I am writing this article from a technical point of view. If you are planning to use weather.com XOAP services in your application, please refer to the terms and conditions from weather.com website. In order to start using the XOAP services, you need to sign up the XOAP datafeed. The signing process is simple, you simply browse the url http://www.weather.com/services/xmloap.html. The URL looks similar to the following. Click on the sign up button, you will reach the registration page. Here you need to specify the site name you need to use this feed for. The form looks similar to the following. Once you fill all the mandatory information, click on save and continue button. That’s it. The registration is over. You will receive an email that contains your partner id, license key and SDK. The SDK available in a zipped format, contains the terms of use and documentation about the services available. Other than this the SDK includes the logos and icons required to display the weather information. As per the SDK, currently there are 2 types of information available through XOAP. These services are Current Conditions for over 30,000 U.S. and over 7,900 international Location IDs Updated at least Hourly Five-Day Forecast (today + 4 additional forecast days in consecutive order beginning with tomorrow) for over 30,000 U.S. and over 7,900 international Location IDs Updated at least Three Times Daily The SDK provides detailed information about the fields included in response of each service. Additionally there is a refresh rate that you need to comply with. As per the SDK, the refresh rate means the following “Refresh Rate” shall mean the maximum frequency with which you may call the XML Feed for a given LocID requesting a data set for that LocID. During the time period in between refresh periods the data must be cached by you either in the memory on your servers or in Your Desktop Application. About the Services Weather.com will provide you with access to the XML Feed over the Internet through the hostname xoap.weather.com. The weather data from the XML feed must be requested for a specific location. So you need a location ID (LOC ID). The XML feed work with 2 types of location IDs. First one is with City Identifiers and second one is using 5 Digit US postal codes. If you do not know your location ID, don’t worry, there is a location id search service available for you to retrieve the location id from city name. Since I am a resident in the Kingdom of Bahrain, I am going to retrieve the weather information for Manama(the capital of Bahrain) . In order to get the location ID for Manama, type the following URL in your address bar. http://xoap.weather.com/search/search?where=manama I got the following XML output. <?xml version="1.0" encoding="UTF-8"?> <!-- This document is intended only for use by authorized licensees of The –> <!-- Weather Channel. Unauthorized use is prohibited. Copyright 1995-2011, –> <!-- The Weather Channel Interactive, Inc. All Rights Reserved. –> <search ver="3.0">       <loc id="BAXX0001" type="1">Al Manama, Bahrain</loc> </search> You can try this with any city name, if the city is available, it will return the location id, and otherwise, it will return nothing. In order to get the weather information, from XOAP,  you need to pass certain parameters to the XOAP service. A brief about the parameters are as follows. Please refer SDK for more details. Parameter name Possible Value cc Optional, if you include this, the current condition will be returned. Value can be anything, as it will be ignored e.g. cc=* dayf If you want the forecast for 5 days, specify dayf=5 This is optional iink Value should be XOAP par Your partner id. You can find this in your registration email from weather.com prod Value should be XOAP key The license key assigned to you. This will be available in the registration email unit s or m (standard or matric or you can think of Celsius/Fahrenheit) this is optional field, if not specified the unit will be standard(s) The URL host for the XOAP service is http://xoap.weather.com. So for my purpose, I need the following request to be made to access the XOAP services. http://xoap.weather.com/weather/local/BAXX0001?cc=*&link=xoap&prod=xoap&par=*********&key=************** (The ***** to be replaced with the corresponding alternatives) The response XML have a root element “weather”. Under the root element, it has the following sections <head> - the meta data information about the weather results returned. <loc> - the location data block that provides, the information about the location for which the wheather data is retrieved. <lnks> - the 4 promotional links you need to place along with the weather display. Additional to these 4 links, there should be another link with weather channel logo to the home page of weather.com. <cc> - the current condition data. This element will be there only if you specify the cc element in the request. <dayf> - the forcast data as you specified. This element will be there only if you specify the dayf in the request. In this walkthrough, I am going to capture the weather information for Manama (Location ID: BAXX0001). You need 2 applications to display weather information in your website. A Console application that retrieves data from the XMLOAP and store in the SQL Server database (or any data store as you prefer).This application will be scheduled to execute in every 25 minutes using windows task scheduler, so that we can comply with the refresh rate. A web application that display data from the SQL Server database Retrieve the Weather from XOAP I have created a console application named, Weather Service. I created a SQL server database, with the following columns. I named the table as tblweather. You are free to choose any name. Column name Description lastUpdated Datetime, this is the last time when the weather data is updated. This is the time of the service running TemparatureDateTime The date and time returned by XML feed Temparature The temperature returned by the XML feed. TemparatureUnit The unit of the temperature returned by the XML feed iconId The id of the icon to be used. Currently 48 icons from 0 to 47 are available. WeatherDescription The Weather Description Phrase returned by the feed. Link1url The url to the first promo link Link1Text The text for the first promo link Link2url The url to the second promo link Link2Text The text for the second promo link Link3url The url to the third promo link Link3Text The text for the third promo link Link4url The url to the fourth promo link Link4Text The text for the fourth promo link Every time when the service runs, the application will update the database columns from the XOAP data feed. When the application starts, It is going to get the data as XML from the url. This demonstration uses LINQ to extract the necessary data from the fetched XML. The following are the code segment for extracting data from the weather XML using LINQ. // first, create an instance of the XDocument class with the XOAP URL. replace **** with the corresponding values. XDocument weather = XDocument.Load("http://xoap.weather.com/weather/local/BAXX0001?cc=*&link=xoap&prod=xoap&par=***********&key=c*********"); // construct a query using LINQ var feedResult = from item in weather.Descendants() select new { unit = item.Element("head").Element("ut").Value, temp = item.Element("cc").Element("tmp").Value, tempDate = item.Element("cc").Element("lsup").Value, iconId = item.Element("cc").Element("icon").Value, description = item.Element("cc").Element("t").Value, links = from link in item.Elements("lnks").Elements("link") select new { url = link.Element("l").Value, text = link.Element("t").Value } }; // Load the root node to a variable, you may use foreach construct instead. var item1 = feedResult.First(); *If you want to learn more about LINQ and XML, read this nice blog from Scott GU. http://weblogs.asp.net/scottgu/archive/2007/08/07/using-linq-to-xml-and-how-to-build-a-custom-rss-feed-reader-with-it.aspx Now you have all the required values in item1. For e.g. if you want to get the temperature, use item1.temp; Now I just need to execute an SQL query against the database. See the connection part. using (SqlConnection conn = new SqlConnection(@"Data Source=sreeju\sqlexpress;Initial Catalog=Sample;Integrated Security=True")) { string strSql = @"update tblweather set lastupdated=getdate(), temparatureDateTime = @temparatureDateTime, temparature=@temparature, temparatureUnit=@temparatureUnit, iconId = @iconId, description=@description, link1url=@link1url, link1text=@link1text, link2url=@link2url, link2text=@link2text,link3url=@link3url, link3text=@link3text,link4url=@link4url, link4text=@link4text"; SqlCommand comm = new SqlCommand(strSql, conn); comm.Parameters.AddWithValue("temparatureDateTime", item1.tempDate); comm.Parameters.AddWithValue("temparature", item1.temp); comm.Parameters.AddWithValue("temparatureUnit", item1.unit); comm.Parameters.AddWithValue("description", item1.description); comm.Parameters.AddWithValue("iconId", item1.iconId); var lstLinks = item1.links; comm.Parameters.AddWithValue("link1url", lstLinks.ElementAt(0).url); comm.Parameters.AddWithValue("link1text", lstLinks.ElementAt(0).text); comm.Parameters.AddWithValue("link2url", lstLinks.ElementAt(1).url); comm.Parameters.AddWithValue("link2text", lstLinks.ElementAt(1).text); comm.Parameters.AddWithValue("link3url", lstLinks.ElementAt(2).url); comm.Parameters.AddWithValue("link3text", lstLinks.ElementAt(2).text); comm.Parameters.AddWithValue("link4url", lstLinks.ElementAt(3).url); comm.Parameters.AddWithValue("link4text", lstLinks.ElementAt(3).text); conn.Open(); comm.ExecuteNonQuery(); conn.Close(); Console.WriteLine("database updated"); } Now click ctrl + f5 to run the service. I got the following output Check your database and make sure, the data is updated with the latest information from the service. (Make sure you inserted one row in the database by entering some values before executing the service. Otherwise you need to modify your application code to count the rows and conditionally perform insert/update query) Display the Weather information in ASP.Net page Now you got all the data in the database. You just need to create a web application and display the data from the database. I created a new ASP.Net web application with a default.aspx page. In order to comply with the terms of weather.com, You need to use Weather.com logo along with the weather display. You can find the necessary logos to use under the folder “logos” in the SDK. Additionally copy any of the icon set from the folder “icons” to your web application. I used the 93x93 icon set. You are free to use any other sizes available. The design view of the page in VS2010 looks similar to the following. The page contains a heading, an image control (for displaying the weather icon), 2 label controls (for displaying temperature and weather description), 4 hyperlinks (for displaying the 4 promo links returned by the XOAP service) and weather.com logo with hyperlink to the weather.com home page. I am going to write code that will update the values of these controls from the values stored in the database by the service application as mentioned in the previous step. Go to the code behind file for the webpage, enter the following code under Page_Load event handler. using (SqlConnection conn = new SqlConnection(@"Data Source=sreeju\sqlexpress;Initial Catalog=Sample;Integrated Security=True")) { SqlCommand comm = new SqlCommand("select top 1 * from tblweather", conn); conn.Open(); SqlDataReader reader = comm.ExecuteReader(); if (reader.Read()) { lblTemparature.Text = reader["temparature"].ToString() + "&deg;" + reader["temparatureUnit"].ToString(); lblWeatherDescription.Text = reader["description"].ToString(); imgWeather.ImageUrl = "icons/" + reader["iconId"].ToString() + ".png"; lnk1.Text = reader["link1text"].ToString(); lnk1.NavigateUrl = reader["link1url"].ToString(); lnk2.Text = reader["link2text"].ToString(); lnk2.NavigateUrl = reader["link2url"].ToString(); lnk3.Text = reader["link3text"].ToString(); lnk3.NavigateUrl = reader["link3url"].ToString(); lnk4.Text = reader["link4text"].ToString(); lnk4.NavigateUrl = reader["link4url"].ToString(); } conn.Close(); } Press ctrl + f5 to run the page. You will see the following output. That’s it. You need to configure the console application to run every 25 minutes so that the database is updated. Also you can fetch the forecast information and store those in the database, and then retrieve it later in your web page. Since the data resides in your database, you have the full control over your display. You need to make sure your website comply with weather.com license requirements. If you want to get the source code of this walkthrough through the application, post your email address below. Hope you enjoy the reading.

    Read the article

  • WCF RIA Services DomainContext Abstraction Strategies–Say That 10 Times!

    - by dwahlin
    The DomainContext available with WCF RIA Services provides a lot of functionality that can help track object state and handle making calls from a Silverlight client to a DomainService. One of the questions I get quite often in our Silverlight training classes (and see often in various forums and other areas) is how the DomainContext can be abstracted out of ViewModel classes when using the MVVM pattern in Silverlight applications. It’s not something that’s super obvious at first especially if you don’t work with delegates a lot, but it can definitely be done. There are various techniques and strategies that can be used but I thought I’d share some of the core techniques I find useful. To start, let’s assume you have the following ViewModel class (this is from my Silverlight Firestarter talk available to watch online here if you’re interested in getting started with WCF RIA Services): public class AdminViewModel : ViewModelBase { BookClubContext _Context = new BookClubContext(); public AdminViewModel() { if (!DesignerProperties.IsInDesignTool) { LoadBooks(); } } private void LoadBooks() { _Context.Load(_Context.GetBooksQuery(), LoadBooksCallback, null); } private void LoadBooksCallback(LoadOperation<Book> books) { Books = new ObservableCollection<Book>(books.Entities); } } Notice that BookClubContext is being used directly in the ViewModel class. There’s nothing wrong with that of course, but if other ViewModel objects need to load books then code would be duplicated across classes. Plus, the ViewModel has direct knowledge of how to load data and I like to make it more loosely-coupled. To do this I create what I call a “Service Agent” class. This class is responsible for getting data from the DomainService and returning it to a ViewModel. It only knows how to get and return data but doesn’t know how data should be stored and isn’t used with data binding operations. An example of a simple ServiceAgent class is shown next. Notice that I’m using the Action<T> delegate to handle callbacks from the ServiceAgent to the ViewModel object. Because LoadBooks accepts an Action<ObservableCollection<Book>>, the callback method in the ViewModel must accept ObservableCollection<Book> as a parameter. The callback is initiated by calling the Invoke method exposed by Action<T>: public class ServiceAgent { BookClubContext _Context = new BookClubContext(); public void LoadBooks(Action<ObservableCollection<Book>> callback) { _Context.Load(_Context.GetBooksQuery(), LoadBooksCallback, callback); } public void LoadBooksCallback(LoadOperation<Book> lo) { //Check for errors of course...keeping this brief var books = new ObservableCollection<Book>(lo.Entities); var action = (Action<ObservableCollection<Book>>)lo.UserState; action.Invoke(books); } } This can be simplified by taking advantage of lambda expressions. Notice that in the following code I don’t have a separate callback method and don’t have to worry about passing any user state or casting any user state (the user state is the 3rd parameter in the _Context.Load method call shown above). public class ServiceAgent { BookClubContext _Context = new BookClubContext(); public void LoadBooks(Action<ObservableCollection<Book>> callback) { _Context.Load(_Context.GetBooksQuery(), (lo) => { var books = new ObservableCollection<Book>(lo.Entities); callback.Invoke(books); }, null); } } A ViewModel class can then call into the ServiceAgent to retrieve books yet never know anything about the DomainContext object or even know how data is loaded behind the scenes: public class AdminViewModel : ViewModelBase { ServiceAgent _ServiceAgent = new ServiceAgent(); public AdminViewModel() { if (!DesignerProperties.IsInDesignTool) { LoadBooks(); } } private void LoadBooks() { _ServiceAgent.LoadBooks(LoadBooksCallback); } private void LoadBooksCallback(ObservableCollection<Book> books) { Books = books } } You could also handle the LoadBooksCallback method using a lambda if you wanted to minimize code just like I did earlier with the LoadBooks method in the ServiceAgent class.  If you’re into Dependency Injection (DI), you could create an interface for the ServiceAgent type, reference it in the ViewModel and then inject in the object to use at runtime. There are certainly other techniques and strategies that can be used, but the code shown here provides an introductory look at the topic that should help get you started abstracting the DomainContext out of your ViewModel classes when using WCF RIA Services in Silverlight applications.

    Read the article

  • Routes for IIS Classic and Integrated Mode

    - by imran_ku07
         Introduction:             ASP.NET MVC Routing feature makes it very easy to provide clean URLs. You just need to configure routes in global.asax file to create an application with clean URLs. In most cases you define routes works in IIS 6, IIS 7 (or IIS 7.5) Classic and Integrated mode. But in some cases your routes may only works in IIS 7 Integrated mode, like in the case of using extension less URLs in IIS 6 without a wildcard extension map. So in this article I will show you how to create different routes which works in IIS 6 and IIS 7 Classic and Integrated mode.       Description:             Let's say that you need to create an application which must work both in Classic and Integrated mode. Also you have no control to setup a wildcard extension map in IIS. So you need to create two routes. One with extension less URL for Integrated mode and one with a URL with an extension for Classic Mode.   routes.MapRoute( "DefaultClassic", // Route name "{controller}.aspx/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional } // Parameter defaults ); routes.MapRoute( "DefaultIntegrated", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional } // Parameter defaults );               Now you have set up two routes, one for Integrated mode and one for Classic mode. Now you only need to ensure that Integrated mode route should only match if the application is running in Integrated mode and Classic mode route should only match if the application is running in Classic mode. For making this work you need to create two custom constraint for Integrated and Classic mode. So replace the above routes with these routes,     routes.MapRoute( "DefaultClassic", // Route name "{controller}.aspx/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional }, // Parameter defaults new { mode = new ClassicModeConstraint() }// Constraints ); routes.MapRoute( "DefaultIntegrated", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional }, // Parameter defaults new { mode = new IntegratedModeConstraint() }// Constraints );            The first route which is for Classic mode adds a ClassicModeConstraint and second route which is for Integrated mode adds a IntegratedModeConstraint. Next you need to add the implementation of these constraint classes.     public class ClassicModeConstraint : IRouteConstraint { public bool Match(HttpContextBase httpContext, Route route, string parameterName, RouteValueDictionary values, RouteDirection routeDirection) { return !HttpRuntime.UsingIntegratedPipeline; } } public class IntegratedModeConstraint : IRouteConstraint { public bool Match(HttpContextBase httpContext, Route route, string parameterName, RouteValueDictionary values, RouteDirection routeDirection) { return HttpRuntime.UsingIntegratedPipeline; } }             HttpRuntime.UsingIntegratedPipeline returns true if the application is running on Integrated mode; otherwise, it returns false. So routes for Integrated mode only matched when the application is running on Integrated mode and routes for Classic mode only matched when the application is not running on Integrated mode.       Summary:             During developing applications, sometimes developers are not sure that whether this application will be host on IIS 6 or IIS 7 (or IIS 7.5) Integrated mode or Classic mode. So it's a good idea to create separate routes for both Classic and Integrated mode so that your application will use extension less URLs where possible and use URLs with an extension where it is not possible to use extension less URLs. In this article I showed you how to create separate routes for IIS Integrated and Classic mode. Hope you will enjoy this article too.   SyntaxHighlighter.all()

    Read the article

  • Instant Rename and Rename Refactoring

    - by Petr
    During the last weeks I have got  a few questions about rename refactoring and some users also complain to me that the refactoring in NetBeans 6.x was much faster. So I would like to explain the situation. For some people, who don't know, Instant Rename action and Rename Refactoring  can look like one action. But it's not true, even if  both actions use the same shortcut (CTRL + R). NetBeans 6.x contained only Instant Rename action (speaking about PHP support), which we can mark as very simple rename refactoring through one file. From NetBeans 7.0 the Instant Rename action works only in "non public" context. It means that this action is used for fast renaming variables that has local context like inside a method, or for renaming private methods and fields that can not be used outside of the scope, where they are declared. From user point of view these two action can be simply recognized. When is after CTRL+R called Instant Rename action, then the identifier is surrounded with rectangle and you can rename it directly in the file. It's fast and simple, also the usages of this identifier are renamed in the same time as you write. The picture below shows Instant Rename action for $message identifier, that is visible only in the print_test method and due this after CTRL+R is called Instant Rename. In NetBeans 7.0, there was added Rename Refactoring that is called for public identifiers. It means for identifiers that could be used in other files. If you press CTRL+R shortcut when the caret is inside $hello identifier from the picture above, NetBeans recognizes that $hello is declared / used in a global context and calls the Rename Refactoring that brings a dialog to change the name of the identifier. From this dialog you have to preview suggested changes, through pressing Preview button and then execute the refactoring through Do Refactoring button. Yes, it's more complicated from user point of view than Instant Rename, but in Rename Refactoring NetBeans can change more files at once. It should be  the developer responsibility to decide whether the suggested changes are right and the refactoring can be executed or in some files original name should be kept. Someone can argue that he doesn't use $hello variable in any other file so Instant Rename could be used in such case. Yes it's true, but in such case NetBeans has to know all usages of all identifiers and keep this informations up to date during editing a file. I'm sure that this is not possible due to the performance problems, mainly for big projects. So the usages are computed after pressing the Preview button. And why is the Refactor button always disabled in the Rename dialog and user has to always go through the preview phase? NetBeans has API and SPI for implementing refactoring actions and this dialog is a part of this infrastructure. If you rename an identifier for example in Java, the Refactor buttons is enabled, but Java is strongly type language and you can be almost in 99% sure that the IDE will suggest the right results. In PHP as a dynamic language, we can not be sure, what NetBeans finds is only a "guess". This is why NetBeans pushes developers to preview the changes for PHP rename. I hope that I have explain it clearly. I'm open to any discussion. What I have described above is situation in NetBeans 7.0, 7.0.1 and probably it will be also in NetBeans 7.1, because there is no plan to change it. Please write your opinion here.

    Read the article

  • Is there a theory for "transactional" sequences of failing and no-fail actions?

    - by Ross Bencina
    My question is about writing transaction-like functions that execute sequences of actions, some of which may fail. It is related to the general C++ principle "destructors can't throw," no-fail property, and maybe also with multi-phase transactions or exception safety. However, I'm thinking about it in language-neutral terms. My concern is with correctly designing error handling in C++ functions that must be reliable. I would like to know what the concepts below are called so that I can learn more about them. I'm sorry that I can't ask the question more directly. Since I don't know this area I have provided an example to explain my question. The question is at the end. Here goes: Consider a sequence of steps or actions executed sequentially, where actions belong to one of two classes: those that always succeed, and those that may fail. In the examples below: S stands for an action that always succeeds (called "no-fail" in some settings). F stands for an action that may fail (for example, it might fail to allocate memory or do I/O that could fail). Consider a sequences of actions (executed sequentially from left to right): S->S->S->S Since each action in the sequence above succeeds, the whole sequence succeeds. On the other hand, the following sequence may fail because the last action may fail: S->S->S->F So, claim: a sequence has the no-fail (S) property if and only if all of its actions are no-fail. Now, I'm interested in action sequences that form "atomic transactions", with "failure atomicity," i.e. where either the whole sequence completes successfully, or there is no effect. I.e. if some action fails, the earlier ones must be rolled back. This requires that any successfully executed actions prior to a failing action must always be able to be rolled back. Consider the sequence: S->S->S->F S<-S<-S In the example above, the first row is the forward path of the transaction, and the second row are inverse actions (executed from right to left) that can be used to roll back if the final top row actions fails. It seems to me that for a transaction to support failure atomicity, the following invariant must hold: Claim: To support failure atomicity (either completion or complete roll-back on failure) all actions preceding the latest failable (F) action on the forward path (marked * in the example below) must have no-fail (S) inverses. The following is an example of a sequence that supports failure atomicity: * S->F->F->F S<-S<-S Further, if we want the transaction to be able to attempt cancellation mid-way through, but still guarantee either full completion or full rollback then we need the following property: Claim: To support failure atomicity and cancellation mid-way through execution, in the face of errors in the inverse (cancellation) path, all actions following the earliest failable (F) inverse on the reverse path (marked *) must be no-fail (S). F->F->F->S->S S<-S<-F<-F * I believe that these two conditions guarantee that an abortable/cancelable transaction will never get "stuck". My questions are: What is the study and theory of these properties called? are my claims correct? and what else is there to know? UPDATE 1: Updated terminology: what I previously called "robustness" is called atomicity in the database literature. UPDATE 2: Added explicit reference to failure atomicity, which seems to be a thing.

    Read the article

  • Guarding against CSRF Attacks in ASP.NET MVC2

    - by srkirkland
    Alongside XSS (Cross Site Scripting) and SQL Injection, Cross-site Request Forgery (CSRF) attacks represent the three most common and dangerous vulnerabilities to common web applications today. CSRF attacks are probably the least well known but they are relatively easy to exploit and extremely and increasingly dangerous. For more information on CSRF attacks, see these posts by Phil Haack and Steve Sanderson. The recognized solution for preventing CSRF attacks is to put a user-specific token as a hidden field inside your forms, then check that the right value was submitted. It's best to use a random value which you’ve stored in the visitor’s Session collection or into a Cookie (so an attacker can't guess the value). ASP.NET MVC to the rescue ASP.NET MVC provides an HTMLHelper called AntiForgeryToken(). When you call <%= Html.AntiForgeryToken() %> in a form on your page you will get a hidden input and a Cookie with a random string assigned. Next, on your target Action you need to include [ValidateAntiForgeryToken], which handles the verification that the correct token was supplied. Good, but we can do better Using the AntiForgeryToken is actually quite an elegant solution, but adding [ValidateAntiForgeryToken] on all of your POST methods is not very DRY, and worse can be easily forgotten. Let's see if we can make this easier on the program but moving from an "Opt-In" model of protection to an "Opt-Out" model. Using AntiForgeryToken by default In order to mandate the use of the AntiForgeryToken, we're going to create an ActionFilterAttribute which will do the anti-forgery validation on every POST request. First, we need to create a way to Opt-Out of this behavior, so let's create a quick action filter called BypassAntiForgeryToken: [AttributeUsage(AttributeTargets.Method, AllowMultiple=false)] public class BypassAntiForgeryTokenAttribute : ActionFilterAttribute { } Now we are ready to implement the main action filter which will force anti forgery validation on all post actions within any class it is defined on: [AttributeUsage(AttributeTargets.Class, AllowMultiple = false)] public class UseAntiForgeryTokenOnPostByDefault : ActionFilterAttribute { public override void OnActionExecuting(ActionExecutingContext filterContext) { if (ShouldValidateAntiForgeryTokenManually(filterContext)) { var authorizationContext = new AuthorizationContext(filterContext.Controller.ControllerContext);   //Use the authorization of the anti forgery token, //which can't be inhereted from because it is sealed new ValidateAntiForgeryTokenAttribute().OnAuthorization(authorizationContext); }   base.OnActionExecuting(filterContext); }   /// <summary> /// We should validate the anti forgery token manually if the following criteria are met: /// 1. The http method must be POST /// 2. There is not an existing [ValidateAntiForgeryToken] attribute on the action /// 3. There is no [BypassAntiForgeryToken] attribute on the action /// </summary> private static bool ShouldValidateAntiForgeryTokenManually(ActionExecutingContext filterContext) { var httpMethod = filterContext.HttpContext.Request.HttpMethod;   //1. The http method must be POST if (httpMethod != "POST") return false;   // 2. There is not an existing anti forgery token attribute on the action var antiForgeryAttributes = filterContext.ActionDescriptor.GetCustomAttributes(typeof(ValidateAntiForgeryTokenAttribute), false);   if (antiForgeryAttributes.Length > 0) return false;   // 3. There is no [BypassAntiForgeryToken] attribute on the action var ignoreAntiForgeryAttributes = filterContext.ActionDescriptor.GetCustomAttributes(typeof(BypassAntiForgeryTokenAttribute), false);   if (ignoreAntiForgeryAttributes.Length > 0) return false;   return true; } } The code above is pretty straight forward -- first we check to make sure this is a POST request, then we make sure there aren't any overriding *AntiForgeryTokenAttributes on the action being executed. If we have a candidate then we call the ValidateAntiForgeryTokenAttribute class directly and execute OnAuthorization() on the current authorization context. Now on our base controller, you could use this new attribute to start protecting your site from CSRF vulnerabilities. [UseAntiForgeryTokenOnPostByDefault] public class ApplicationController : System.Web.Mvc.Controller { }   //Then for all of your controllers public class HomeController : ApplicationController {} What we accomplished If your base controller has the new default anti-forgery token attribute on it, when you don't use <%= Html.AntiForgeryToken() %> in a form (or of course when an attacker doesn't supply one), the POST action will throw the descriptive error message "A required anti-forgery token was not supplied or was invalid". Attack foiled! In summary, I think having an anti-CSRF policy by default is an effective way to protect your websites, and it turns out it is pretty easy to accomplish as well. Enjoy!

    Read the article

  • SQL ADO.NET shortcut extensions (old school!)

    - by Jeff
    As much as I love me some ORM's (I've used LINQ to SQL quite a bit, and for the MSDN/TechNet Profile and Forums we're using NHibernate more and more), there are times when it's appropriate, and in some ways more simple, to just throw up so old school ADO.NET connections, commands, readers and such. It still feels like a pain though to new up all the stuff, make sure it's closed, blah blah blah. It's pretty much the least favorite task of writing data access code. To minimize the pain, I have a set of extension methods that I like to use that drastically reduce the code you have to write. Here they are... public static void Using(this SqlConnection connection, Action<SqlConnection> action) {     connection.Open();     action(connection);     connection.Close(); } public static SqlCommand Command(this SqlConnection connection, string sql){    var command = new SqlCommand(sql, connection);    return command;}public static SqlCommand AddParameter(this SqlCommand command, string parameterName, object value){    command.Parameters.AddWithValue(parameterName, value);    return command;}public static object ExecuteAndReturnIdentity(this SqlCommand command){    if (command.Connection == null)        throw new Exception("SqlCommand has no connection.");    command.ExecuteNonQuery();    command.Parameters.Clear();    command.CommandText = "SELECT @@IDENTITY";    var result = command.ExecuteScalar();    return result;}public static SqlDataReader ReadOne(this SqlDataReader reader, Action<SqlDataReader> action){    if (reader.Read())        action(reader);    reader.Close();    return reader;}public static SqlDataReader ReadAll(this SqlDataReader reader, Action<SqlDataReader> action){    while (reader.Read())        action(reader);    reader.Close();    return reader;} It has been awhile since I've really revisited these, so you will likely find opportunity for further optimization. The bottom line here is that you can chain together a bunch of these methods to make a much more concise database call, in terms of the code on your screen, anyway. Here are some examples: public Dictionary<string, string> Get(){    var dictionary = new Dictionary<string, string>();    _sqlHelper.GetConnection().Using(connection =>        connection.Command("SELECT Setting, [Value] FROM Settings")            .ExecuteReader()            .ReadAll(r => dictionary.Add(r.GetString(0), r.GetString(1))));    return dictionary;} or... public void ChangeName(User user, string newName){    _sqlHelper.GetConnection().Using(connection =>         connection.Command("UPDATE Users SET Name = @Name WHERE UserID = @UserID")            .AddParameter("@Name", newName)            .AddParameter("@UserID", user.UserID)            .ExecuteNonQuery());} The _sqlHelper.GetConnection() is just some other code that gets a connection object for you. You might have an even cleaner way to take that step out entirely. This looks more fluent, and the real magic sauce for me is the reader bits where you can put any kind of arbitrary method in there to iterate over the results.

    Read the article

  • "Unsafe JavaScript attempt to access frame with URL..." error when developing for Facebook Open Grap

    - by Neil Sarkar
    Chrome (or any other webkit browser) throws a ton of these "Unsafe JavaScript attempt to access frame with URL..." when working with the Facebook Open Graph API. It doesn't interfere with actual operation, but it does make the javascript console basically unusable. I'd like to know if there is a way to suppress warnings in the console? Or if there are other solutions you guys can think of, I would really appreciate it. Thanks.

    Read the article

  • How to add http:// if it's not exists in the URL?

    - by David
    Hi, How to add http:// to the url if there isn't a http:// or https:// or ftp:// ? Example: addhttp("www.google.com"); // http://www.google.com addhttp("google.com"); // http://google.com addhttp("ftp://google.com"); // ftp://google.com addhttp("https://google.com"); // https://google.com addhttp("http://google.com"); // http://google.com

    Read the article

  • HttpHandler to handle all kinds of URL's in Mono Apache/XSP in order to build a REST service

    - by vtortola
    Hi, I want to develop my own REST service, so I've created a HttpHandler that is configured with verb="" and path="", the the application in "~/MyRESTsrv/" will handle any derivated URL. This approach works good in IIS7 with "integrated mode" and apparently in IIS6 if you map all the extensions to "aspnet_isapi.dll". Is this possible in Apache/XSP with Mono? Do I have to do something special or it will work out of the box? Cheers.

    Read the article

  • How can I get a 302 redirection URL's Location header in PHP?

    - by QAH
    I am trying to find a universal way to expand most if not all of the shortened URLs out there. I know short URLs such as bit.ly, TinyURL, goo.gl, etc use the 302 redirection method to redirect you to another site. How can I make a HEAD request to the shortened URL in php and get the "Location" part of the header? Please help me with this. Thanks

    Read the article

  • What's the simplest way to call Http GET url using Delphi?

    - by Mohammed Nasman
    There's a web services I want to call in my application, I can use it with importing the WSDL or by just use "HTTP GET" with the URL and parameters, so I prefer the later because it's simple thing. I know I can use indy idhttp.get, to do the job, but this is very simple thing and I don't want to add complex indy code to my application. UPDATE: sorry if I was not clear, I meant by "not to add complex indy code", that I don't want add indy components for just this simple task, and prefer more lighter way for that.

    Read the article

  • Can I use a ShareThis/AddThis Button if my site's navigation relies on Hash tags in the url?

    - by John Himmelman
    I want to embed a ShareThis/AddThis button on my site but the site's navigation relies on Hash tags in the url. Each page is assigned a unique hash value (ie, http://domain.com/index.php#products). Changing the navigation/page design isn't an option. Will these service preserve the hash value (both embed JS on the page)? If they don't, what are some alternative solutions?

    Read the article

  • HTTP basic authentication via URL doesn't work with Firefox?

    - by Peter
    Normally you can login to sites that require HTTP basic authentication by passing the username and password in the URL, e.g.: http://myusername:[email protected]/mypath On my Linux machine, I could access this website without problems with my Konqueror browser as well as with my Opera browser. But with Firefox it doesn't work? It always displays the "Authentication Required" dialog window? Any ideas why it would work with the other browsers but not with Firefox? Peter

    Read the article

  • How to save video from a url to disk, also how to begin playback after some buffering?

    - by Shizam
    First question is, given a url to an mp4 video, how can I save that file to disk? The followup to that is while its saving, can I begin playback after its buffered some of the video to disk or do I have to wait for the entire file to be written and then: MPMoviePlayerController* theMovie=[[MPMoviePlayerController alloc] initWithContentURL:theURL]; using the path to the local file. Thanks, Sam

    Read the article

  • How to save video from a url to disk, also how to begin playback after some buffering?

    - by Shizam
    First question is, given a url to an mp4 video, how can I save that file to disk? The followup to that is while its saving, can I begin playback after its buffered some of the video to disk or do I have to wait for the entire file to be written and then: MPMoviePlayerController* theMovie=[[MPMoviePlayerController alloc] initWithContentURL:theURL]; using the path to the local file. Thanks, Sam

    Read the article

< Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >