Search Results

Search found 25534 results on 1022 pages for 'write powershell'.

Page 178/1022 | < Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >

  • Bad disk performance on HP DL360 with Smarty Array P400i RAID controller

    - by sarge
    I have a HP DL360 server with 4x 146GB SAS disks and a Smart Array P400i RAID controller with 256MB cache. The disks are in RAID 5 (3 disks + 1 hot spare). The server is running VMware ESX 3i. The disk write performance is really bad. Here are some numbers: ns1:~# hdparm -tT /dev/sda /dev/sda: Timing cached reads: 3364 MB in 2.00 seconds = 1685.69 MB/sec Timing buffered disk reads: 18 MB in 3.79 seconds = 4.75 MB/sec ns1:~# time sh -c "dd if=/dev/zero of=ddfile bs=8k count=125000 && sync" 125000+0 records in 125000+0 records out 1024000000 bytes (1.0 GB) copied, 282.307 s, 3.6 MB/s real 4m52.003s user 0m2.160s sys 3m10.796s Compared to another server those number are terrible: Dell R200, 2x 500GB SATA disks, PERC raid controller (disks are mirrored). web4:~# hdparm -tT /dev/sda /dev/sda: Timing cached reads: 6584 MB in 2.00 seconds = 3297.79 MB/sec Timing buffered disk reads: 316 MB in 3.02 seconds = 104.79 MB/sec web4:~# time sh -c "dd if=/dev/zero of=ddfile bs=8k count=125000 && sync" 125000+0 records in 125000+0 records out 1024000000 bytes (1.0 GB) copied, 35.2919 s, 29.0 MB/s real 0m36.570s user 0m0.476s sys 0m32.298s The server isn't very loaded and the VMware Infrastructure Client performance monitor is showing 550KBps average read and 1208KBps average write for the last 30 minutes (highest write rate: 6.6MBps). This has been a problem from the start. Any ideas?

    Read the article

  • PostgreSQL lots of writes

    - by strife911
    Hi, I am using postgreSQL for a scientific application (unsupervised clustering). The python program is multi-threaded so that each thread manages its own postmaster process (one per core). Hence, their is a lot of concurrency. Each thread-process loop infinitely though two SQL queries. The first is for reading, the second is for writing. The read operation considers 500 time the amount of rows the write operation considers. Here is the output of dstat: ----total-cpu-usage---- ------memory-usage----- -dsk/total- --paging-- --io/total- usr sys idl wai hiq siq| used buff cach free| read writ| in out | read writ 4 0 32 64 0 0|3599M 63M 57G 1893M|1524k 16M| 0 0 | 98 2046 1 0 35 64 0 0|3599M 63M 57G 1892M|1204k 17M| 0 0 | 68 2062 2 0 32 66 0 0|3599M 63M 57G 1890M|1132k 17M| 0 0 | 62 2033 2 1 32 65 0 0|3599M 63M 57G 1904M|1236k 18M| 0 0 | 80 1994 2 0 31 67 0 0|3599M 63M 57G 1903M|1312k 16M| 0 0 | 70 1900 2 0 37 60 0 0|3599M 63M 57G 1899M|1116k 15M| 0 0 | 71 1594 2 1 37 60 0 0|3599M 63M 57G 1898M| 448k 17M| 0 0 | 39 2001 2 0 25 72 0 0|3599M 63M 57G 1896M|1192k 17M| 0 0 | 78 1946 1 0 40 58 0 0|3599M 63M 57G 1895M| 432k 15M| 0 0 | 38 1937 I am pretty sure I could write more often than that for I have seen it write up to 110-140M on dstat. How can I optimize this process?

    Read the article

  • Explain why folder's permissions differ depending on HOW user is accessing server AFP vs SSH

    - by Meltemi
    Hoping someone can explain what is probably fairly obvious...but confuses me. Imagine two users with admin privileges on our server (Mac OS X Server 10.5). Call them joe & bob. both users are members of these groups: Staff Group ID: 20 Workgroup Group ID: 1025 Shared folder "devfolder" has sharing set as so: POSIX: Owner: joe read & write Group: admin read & write Other no access ACL: Workgroup Allow Read & write Question is why when looking at same folder does the ownership appear to change depending on who's doing the looking?!? Both looking at same folder on the server: From Joe's perspective: xserve:devfolder joe$ ls -l drwxrwxr-x 6 joe workgroup 204 May 20 19:32 app drwxrwxr-x 9 joe workgroup 306 May 20 19:32 config drwxrwxr-x 3 joe workgroup 102 May 20 19:32 db drwxrwxr-x 3 joe workgroup 102 May 20 19:32 doc drwxrwxr-x 3 joe workgroup 102 May 20 19:32 lib And from Bob's perspective (folder mounted on his machine via AFP): bobmac:devfolder bob$ ls -l drwxrwxr-x 6 bob _bob 264 May 20 19:32 app drwxrwxr-x 9 bob _bob 264 May 20 19:32 config drwxrwxr-x 3 bob _bob 264 May 20 19:32 db drwxrwxr-x 3 bob _bob 264 May 20 19:32 doc drwxrwxr-x 3 bob _bob 264 May 20 19:32 lib Now if Bob connects to server via SSH then his output is identical to Joe's, as expected. Can anyone tell me what the client is doing in this case and what should be expected when bob creates or updates files in this folder? What tools do I have to better understand this from the command line? Is this normal? Perhaps a "cleaner" way that wouldn't be confusing with "bob _bob"?!?

    Read the article

  • Can compressing Program Files save space *and* give a significant boost to SSD performance?

    - by Christopher Galpin
    Considering solid-state disk space is still an expensive resource, compressing large folders has appeal. Thanks to VirtualStore, could Program Files be a case where it might even improve performance? Discovery In particular I have been reading: SSD and NTFS Compression Speed Increase? Does NTFS compression slow SSD/flash performance? Will somebody benchmark whole disk compression (HD,SSD) please? (may have to scroll up) The first link is particularly dreamy, but maybe head a little too far in the clouds. The third link has this sexy semi-log graph (logarithmic scale!). Quote (with notes): Using highly compressable data (IOmeter), you get at most a 30x performance increase [for reads], and at least a 49x performance DECREASE [for writes]. Assuming I interpreted and clarified that sentence correctly, this single user's benchmark has me incredibly interested. Although write performance tanks wretchedly, read performance still soars. It gave me an idea. Idea: VirtualStore It so happens that thanks to sanity saving security features introduced in Windows Vista, write access to certain folders such as Program Files is virtualized for non-administrator processes. Which means, in normal (non-elevated) usage, a program or game's attempt to write data to its install location in Program Files (which is perhaps a poor location) is redirected to %UserProfile%\AppData\Local\VirtualStore, somewhere entirely different. Thus, to my understanding, writes to Program Files should primarily only occur when installing an application. This makes compressing it not only a huge source of space gain, but also a potential candidate for performance gain. Testing The beginning of this post has me a bit timid, it suggests benchmarking NTFS compression on a whole drive is difficult because turning it off "doesn't decompress the objects". However it seems to me the compact command is perfectly capable of doing so for both drives and individual folders. Could it be only marking them for decompression the next time the OS reads from them? I need to find the answer before I begin my own testing.

    Read the article

  • Drupal install and permissions

    - by Richard
    So I'm really stuck on this issue. An install process is complaining about write permission on settings.php and sites/default/files/. However, I've moved these files temporarily to write/read (chmod 777) and changed the owner/group to "apache" as shown below. -bash-4.1$ ls -hal total 28K drwxrwxrwx. 3 richard richard 4.0K Aug 23 15:03 . drwxr-xr-x. 4 richard richard 4.0K Aug 18 14:20 .. -rwxrwxrwx. 1 apache apache 9.3K Mar 23 16:34 default.settings.php drwxrwxrwx. 2 apache apache 4.0K Aug 23 15:03 files -rwxrwxrwx. 1 apache apache 0 Aug 23 15:03 settings.php However, the install is still complaining about write permissions. I followed steps one and two of the INSTALL.txt but no luck. Update: To further explore the situation, I created sites/default/richard.php with the following code: <?php error_reporting(E_ALL); ini_set('display_errors', '1'); mkdir('files'); print("<hr> User is "); passthru("whoami"); passthru("pwd"); ?> Run from the command line (under user "richard"), no problem. The folder is created everything is a go. Run from the web, I get the following: Warning: mkdir(): Permission denied in /var/www/html/sites/default/richard.php on line 9 User is apache /var/www/html/sites/default Update 2: Safe mode appears to be off... -bash-4.1$ cat /etc/php.ini | grep safe | grep mode | grep -v \; safe_mode = Off safe_mode_gid = Off safe_mode_include_dir = safe_mode_exec_dir = safe_mode_allowed_env_vars = PHP_ safe_mode_protected_env_vars = LD_LIBRARY_PATH sql.safe_mode = Off

    Read the article

  • How to automatically remove Flash history/privacy trail? Or stop Flash from storing it?

    - by Arjan van Bentem
    Many people have heard about third-party cookies, and some browsers even block those by default. Some people may even be using Private Browsing modes. However, only few seem to realise that Adobe's Flash player also leaves a cross-browser trail on your local hard drive, and allows for sending cookie-like information back to the server, including third-party sites. And because it is a plugin, Flash does not take any of the browser's privacy settings into account. Sorry for the long post, but first some details about why using Flash raises a privacy concern, followed by the results of my tests: The Flash player keeps a cross-browser history of the domain names of the Flash-sites your computer has visited. Unlike your browser's history, this history is not limited to a certain number of days. History is also recorded while using so-called Private Browsing modes. It is stored on your hard drive (though, as described below, without going to Adobe's site you won't know what is stored). I am not sure if any date and time information is kept about each visit, but to see the domain names: right-click on some Flash content, open the settings dialog, and click the Help icon or click the Advanced button within the Privacy tab. This opens a browser to the help pages on Adobe.com, where one can click through to the Website Storage Settings panel. One can clear the existing list, but one cannot stop it from being recorded again. Flash allows for storing data on your local hard drive, using so-called Local Shared Objects (aka "Flash Cookies"). Just like HTTP cookies, this data can be sent back to the server, for tracking purposes. They are cross-browser, have no expiration date, and no user defined maximum lifetime can be set in the Flash preferences either. These not being HTTP cookies, they are (of course) not blocked by a browser's cookies preferences and are not removed when the normal HTTP cookies are deleted. Adobe has announced that version 10.1 will obey Private Browsing in most popular browsers, but unfortunately no word about also removing the data whenever normal cookies are deleted manually. And its implementation might be confusing: [..] if the browser is in normal browsing mode when the Flash Player instance is created, then that particular instance will forever be in normal browsing mode (private browsing is turned off). Accordingly, toggling private browsing on or off without refreshing the page or closing the private browsing window will not impact Flash Player. Local Shared Objects are not limited to the site you visit, and third-party storage is enabled by default. At the Global Storage Settings panel one can deselect the default Allow third-party Flash content to store data on your computer. Because of the cross-browser and expiration-less nature (and the fact that few people know about it), I feel that the cross-browser third-party Flash Cookies are more dangerous for visitor tracking than third-party normal HTTP cookies. They are even used to restore plain HTTP cookies that the user tried to delete: "All advertisers, websites and networks use cookies for targeted advertising, but cookies are under attack. According to current research they are being erased by 40% of users creating serious problems," says Mookie Tenembaum, founder of United Virtualities. "From simple frequency capping to the more sophisticated behavioral targeting, cookies are an essential part of any online ad campaign. PIE ["Persistent Identification Element"] will give publishers and third-party providers a persistent backup to cookies effectively rendering them unassailable", adds Tenembaum. [..] To justify this tracking mechanism, UV's Tenembaum said, "The user is not proficient enough in technology to know if the cookie is good or bad, or how it works." When selecting None (zero KB) for Specify the amount of disk space that website websites that you haven't yet visited can use to store information on your computer, and checking Never ask again then some sites do not work. However, the same site might work when setting it to None but without selecting Never ask again, and then choose Deny whenever prompted. Both options would result in zero KB of data being allowed, but the behaviour differs. The plugin also provides a Flash Player cache for Adobe-signed files. I guess these files are not an issue. So: how to automatically delete that information? On a Mac, one can find a settings.sol file and a folder for each visited Flash-website in: $HOME/Library/Preferences/Macromedia/Flash Player/macromedia.com/support/flashplayer/sys/ Deleting the settings.sol file and all the folders in sys, removes the trail from the settings panels. However, the actual Local Shared Ojects are elsewhere (see Wikipedia for locations on other operating systems), in a randomly named subfolder of: $HOME/Library/Preferences/Macromedia/Flash Player/#SharedObjects But then: how to remove this automatically? Simply removing the folders and the settings.sol file every now and then (like by using launchd or Windows' Task Scheduler) may interfere with active browsers. Or is it safe to assume that, given the cross-browser nature, the plugin would not care if things are removed while it is active? Only clearing during log-off may not work for those who hibernate all the time. Firefox users can install BetterPrivacy or Objection to delete the Local Shared Objects (for all others browsers as well). I don't know if that also deletes the trail of website domain names. Or: how to stop Flash from storing a history trail? Change of plans: I'm currently testing prohibiting Flash to write to its own sys and #SharedObjects folders. So far, Flash has not tried to restore permissions (though, when deleting the folders, Flash will of course recreate them). I've not encountered any problems but this may take some while to validate, using multiple browsers and sites. I've not yet found a log that reports errors. On a Mac: cd "$HOME/Library/Preferences/Macromedia/Flash Player/macromedia.com/support/flashplayer" rm -r sys/* chmod u-w sys cd "$HOME/Library/Preferences/Macromedia/Flash Player" # preserve the randomly named subfolders (only preserving the latest would suffice; see below) rm -r \#SharedObjects/*/* chmod -R u-w \#SharedObjects I guess the above chmods cannot be achieved on an old Windows system (I'm not sure about XP and Vista?). Though maybe on Windows one could replace the folders sys and #SharedObjects with dummy files with the same names? Anyone? Obviously, keeping Flash from storing those Local Shared Objects for all sites may cause problems. Some test results (Flash 10 on Mac OS X): When blocking the sys folder (even when leaving the #SharedObjects folder writable) then YouTube won't remember your volume settings while viewing multiple videos. Temporarily allowing write access to the blocked folders while visiting trusted sites (to only create folders for domains you like, maybe including references in settings.sol) solves that. This way, for YouTube, Flash could be allowed to write to sys/#s.ytimg.com and #SharedObjects/s.ytimg.com, while Flash could not create new folders for other domains. One may also need to make settings.sol read-only afterwards, or delete it again. When blocking both the sys and #SharedObjects folders, YouTube and Vimeo work fine (though they might not remember any settings). However, Bits on the Run refuses to even show the video player. This is solved by temporarily unblocking the #SharedObjects folder, to allow Flash to create a subfolder with some random name. Within this folder, it would create yet another folder for the current Flash website (content.bitsontherun.com). Removing that website-specific folder, and blocking both #SharedObjects and the randomly named subfolder, still seems to allow Bits on the Run to operate, even though it still cannot write anything to disk. So: the existence of the randomly named subfolder (even when write protected) is important for some sites. When I first found the #SharedObjects folder, it held many subfolders with random names, some created on the very same day. I wonder when Flash decides it wants a new folder, and how it determines (and remembers) that random name. For a moment I considered not blocking write access for sys and #SharedObjects, but explicitly creating read-only folders for well-known third-party tracking domains (like based on a list from, for example, AdBlock Plus). That way, any other domain could still create Local Shared Objects. But the list would be long, and the domains from AdBlock Plus are probably all third-party domains anyway, so disabling Allow third-party Flash content to store data on your computer might have the very same result. Any experience anyone? (Final notes: if the above links to the settings panels do not work in the future, then use the URL that is known to Flash player as a starting point: www.adobe.com/go/settingsmanager. See also "You Deleted Your Cookies? Think Again" at Wired.com -- which uses Flash cookies itself as well... For the very suspicious using Time Machine: you may want to exclude both folders, for each user, and remove the trace that is already on your backup.)

    Read the article

  • How to diagnose disk errors when disk appears to be ok?

    - by Kylotan
    I have a six-month-old 1TB Seagate drive formatted into 2 NTFS partitions, and the disk appeared to be failing with Windows dropping down from UDMA to PIO mode, reporting Delayed Write Errors, and hanging Explorer when browsing directories. My initial suspicion was that the disk was dying. However, on further examination it appears that Ubuntu, which doesn't write to the volume frequently like Windows does, was able to read the disk properly and retrieve all the data intact, saving me from having to use an older backup. Finally, running the Seatools DOS diagnostic reported that the disk has no problems, ie. SMART errors and no bad sectors, apparently. This, in combination with the relative youth of the disk, suggests that something else is broken. The cable? The PSU? The integrated disk controller? But what would be a good way to diagnose the problem without risking damaging the data? I intend to extract the disk and try it in an external eSATA enclosure and see if the write errors cease, but in the event of the disk appearing to be fine, I would like to be able to confirm what part of the hardware is actually broken here in order to know just what needs replacing. Are there any good ways to go about this?

    Read the article

  • How to diagnose disk errors when disk appears to be ok?

    - by Kylotan
    I have a six-month-old 1TB Seagate drive formatted into 2 NTFS partitions, and the disk appeared to be failing with Windows dropping down from UDMA to PIO mode, reporting Delayed Write Errors, and hanging Explorer when browsing directories. My initial suspicion was that the disk was dying. However, on further examination it appears that Ubuntu, which doesn't write to the volume frequently like Windows does, was able to read the disk properly and retrieve all the data intact, saving me from having to use an older backup. Finally, running the Seatools DOS diagnostic reported that the disk has no problems, ie. SMART errors and no bad sectors, apparently. This, in combination with the relative youth of the disk, suggests that something else is broken. The cable? The PSU? The integrated disk controller? But what would be a good way to diagnose the problem without risking damaging the data? I intend to extract the disk and try it in an external eSATA enclosure and see if the write errors cease, but in the event of the disk appearing to be fine, I would like to be able to confirm what part of the hardware is actually broken here in order to know just what needs replacing. Are there any good ways to go about this?

    Read the article

  • Samba authentication problem when attempting to connect from Windows client

    - by Camsoft
    I've got a Linux server running Ubuntu and Samba. I've created two shares in Samba that point to directories that are owned by the user "cameron". When I attempt to connect to these shares on Windows 7 is connects and allows me to see the files but they are read-only. This is the desired action for guest users but not for authenticated users. My user on the Windows client is "Cameron" and has the same password as the Linux user "cameron". I don't think my Windows user has authenticated against the Linux user. I even created a users.map file to map the user cameron (linux) to Cameron (windows) but still it does not work. Here is my samba config file (UPDATED): [global] server string = %h server (Samba, Ubuntu) map to guest = Bad User passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . username map = /etc/samba/users.map syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 os level = 65 preferred master = Yes dns proxy = No wins support = Yes usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d valid users = cameron write list = cameron [www] path = /usr/local/apache2/htdocs write list = @www-data force group = www-data guest ok = Yes [cameron] path = /home/cameron write list = @www-data force group = www-data guest ok = Yes

    Read the article

  • Is it possible to shrink the size of an HP Smart Array logical drive?

    - by ewwhite
    I know extension is quite possible using the hpacucli utility, but is there an easy way to reduce the size of an existing logical drive (not array)? The controller is a P410i in a ProLiant DL360 G6 server. I'd like to reduce logicaldrive 1 from 72GB to 40GB. => ctrl all show config detail Smart Array P410i in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: 5001438006FD9A50 Cache Serial Number: PAAVP9VYFB8Y RAID 6 (ADG) Status: Disabled Controller Status: OK Chassis Slot: Hardware Revision: Rev C Firmware Version: 3.66 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 3 secs Surface Scan Mode: Idle Queue Depth: Automatic Monitor and Performance Delay: 60 min Elevator Sort: Enabled Degraded Performance Optimization: Disabled Inconsistency Repair Policy: Disabled Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 15 secs Cache Board Present: True Cache Status: OK Accelerator Ratio: 25% Read / 75% Write Drive Write Cache: Enabled Total Cache Size: 512 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True Array: A Interface Type: SAS Unused Space: 412476 MB Status: OK Logical Drive: 1 Size: 72.0 GB Fault Tolerance: RAID 1+0 Heads: 255 Sectors Per Track: 32 Cylinders: 18504 Strip Size: 256 KB Status: OK Array Accelerator: Enabled Unique Identifier: 600508B1001C132E4BBDFAA6DAD13DA3 Disk Name: /dev/cciss/c0d0 Mount Points: /boot 196 MB, / 12.0 GB, /usr 8.0 GB, /var 4.0 GB, /tmp 2.0 GB OS Status: LOCKED Logical Drive Label: AE438D6A5001438006FD9A50BE0A Mirror Group 0: physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK) Mirror Group 1: physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 146 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 146 GB, OK) SEP (Vendor ID PMCSIERA, Model SRC 8x6G) 250 Device Number: 250 Firmware Version: RevC WWID: 5001438006FD9A5F Vendor ID: PMCSIERA Model: SRC 8x6G

    Read the article

  • Writing a script for ash?

    - by rumtscho
    My VPN is behaving funny sometimes, and I have to restart it often. I wanted to write a script which does that for me. It doesn't have to be anything fancy, just a shortcut for the commands I have to type into the terminal. More specifically: it will look at the running processes. If it finds a running vpnc process, it will kill it. Then it will start vpnc. I've written bash scripts of similar complexity, but now I don't have a bash, only an ash. Until now, the only difference I noticed is that there are much less commands available, but then, I don't use it very often. So I have some questions. Is writing ash scripts different than writing bash scripts? Is there something specific to consider when doing it? When the script is ready, how can I deploy it? For bash, I just put the executable file under /usr/lib and run it by typing the file name into the command line, will this work with ash? Are there any special pitfalls to watch out for in the script I want to write? I think that the killing process part may get hairy, if I write something that kills the wrong process, but even then running the script shouldn't break anything permanently, right?

    Read the article

  • GlassFish cluster-targeted jdbc is not enabled

    - by Jin Kwon
    I have a GlassFish cluster. When I tried to add node and a instance, DAS saids a bunch of error messages telling Resource [ jdbc/xxxx ] of type [ jdbc ] is not enabled [#|2012-11-14T12:07:04.318+0900|SEVERE|glassfish3.1.2|javax.enterprise.system.core.com.sun.enterprise.v3.server|_ThreadID=2803;_ThreadName=Thread-2;|java.lang.StackOverflowError at java.io.FileOutputStream.writeBytes(Native Method) at java.io.FileOutputStream.write(FileOutputStream.java:318) at java.io.BufferedOutputStream.write(BufferedOutputStream.java:122) at java.io.PrintStream.write(PrintStream.java:480) at sun.nio.cs.StreamEncoder.writeBytes(StreamEncoder.java:221) at sun.nio.cs.StreamEncoder.implFlushBuffer(StreamEncoder.java:291) at sun.nio.cs.StreamEncoder.implFlush(StreamEncoder.java:295) at sun.nio.cs.StreamEncoder.flush(StreamEncoder.java:141) at java.io.OutputStreamWriter.flush(OutputStreamWriter.java:229) at java.util.logging.StreamHandler.flush(StreamHandler.java:242) at java.util.logging.ConsoleHandler.publish(ConsoleHandler.java:106) at java.util.logging.Logger.log(Logger.java:522) at com.sun.logging.LogDomains$1.log(LogDomains.java:372) at java.util.logging.Logger.doLog(Logger.java:543) at java.util.logging.Logger.log(Logger.java:607) at com.sun.enterprise.resource.deployer.JdbcResourceDeployer.deployResource(JdbcResourceDeployer.java:117) at org.glassfish.javaee.services.ResourceProxy.create(ResourceProxy.java:90) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:507) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:455) at javax.naming.InitialContext.lookup(InitialContext.java:411) at javax.naming.InitialContext.lookup(InitialContext.java:411) at com.sun.appserv.connectors.internal.api.ResourceNamingService.lookup(ResourceNamingService.java:221) the JDBC Resource is ok and targeted with the cluster. I've installed the JDBC driver on the new node. Can anybody help?

    Read the article

  • Drupal install and permissions

    - by Richard
    So I'm really stuck on this issue. An install process is complaining about write permission on settings.php and sites/default/files/. However, I've moved these files temporarily to write/read (chmod 777) and changed the owner/group to "apache" as shown below. -bash-4.1$ ls -hal total 28K drwxrwxrwx. 3 richard richard 4.0K Aug 23 15:03 . drwxr-xr-x. 4 richard richard 4.0K Aug 18 14:20 .. -rwxrwxrwx. 1 apache apache 9.3K Mar 23 16:34 default.settings.php drwxrwxrwx. 2 apache apache 4.0K Aug 23 15:03 files -rwxrwxrwx. 1 apache apache 0 Aug 23 15:03 settings.php However, the install is still complaining about write permissions. I followed steps one and two of the INSTALL.txt but no luck. Update: To further explore the situation, I created sites/default/richard.php with the following code: <?php error_reporting(E_ALL); ini_set('display_errors', '1'); mkdir('files'); print("<hr> User is "); passthru("whoami"); passthru("pwd"); ?> Run from the command line (under user "richard"), no problem. The folder is created everything is a go. Run from the web, I get the following: Warning: mkdir(): Permission denied in /var/www/html/sites/default/richard.php on line 9 User is apache /var/www/html/sites/default Update 2: Safe mode appears to be off... -bash-4.1$ cat /etc/php.ini | grep safe | grep mode | grep -v \; safe_mode = Off safe_mode_gid = Off safe_mode_include_dir = safe_mode_exec_dir = safe_mode_allowed_env_vars = PHP_ safe_mode_protected_env_vars = LD_LIBRARY_PATH sql.safe_mode = Off

    Read the article

  • How do I deny access to everybody but me in Windows 7?

    - by GregH
    I am trying to set up a file server on my my Windows 7 Pro system at home. I set up one common "Share" folder that I have shared/published. Within the share folder I want to have individual folders for me and my wife...that is only I can read/write my folder and only my wife can read/write to her folder and neither of us can read the contents of the other person's folder. Then I want to have a "public" folder where we can both read/write to contents of the folder as well as any sub-folders created, but my "kids" account can only read from this folder and sub folders. It seems really confusing to set up something like this and it really shouldn't. I am really confused between the "allow", "deny", and dimmed check boxes in the security tab. It seems that if I "Deny" access to "Everyone" on my private folder, then I don't even have access to it. Windows security seems backwards from the rest of the world's security models. If I am in two groups and I deny access to one of the groups but allow access to the other group then Windows security denies me access as I am in one of the groups that has access disallowed. Very confusing.

    Read the article

  • Installing Linux on an Asus p8z68-m PRO Motherboard

    - by Holland
    Here is a challenge: how is this done? I've tried disabling the ASM1061 controller in the Onboard Devices section, using Wubi, booting from USB (as I don't have a DVD drive, yet), and even booting from RAID/IDE (with AHCI as the default) to do this. Still, no dice. Google shows up virtually nothing related about Linux and this mobo, apart from a people just saying "disable ASMedia" (which, I assume is the ASM1061 controller, as that's all I see - apart from the USB 3.0, which I disabled already) and it hasn't really helped much. Thus, what is wrong here? Edit My problem is that I cannot boot Linux via USB or a simple Windows installer such as Wubi (for Ubuntu). I wind up getting error messages along the lines of write cache failed, along with many other cryptic error messages similar to the following: [ 1400.351374] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1400.353433] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1400.356601] sd 4:0:0:0: [sdb] Assuming drive cache: write through This seems to be common for Asus P8Z68-M Pro motherboards, with the only notable solution being to "disable ASMedia", which, as I said before, I'm guessing is the ASM1061 controller on the motherboard. Despite already disabling this, I have tried this with both Fedora and Ubuntu without any success. I need to know what I can do about this; has anyone ran into something similar or heard about this issue before? I know these motherboards are relatively new...

    Read the article

  • Communicating via Command Mode with IBM HS22 IMM via AMM

    - by MikeyB
    On previous model blades that contained a BMC, I was able to communicate from our external management station via pass-through commands to the BMC to do things such as power blades on/off, set VPD parameters, reboot the BMC, etc. Now on the HS22, a bunch of things happen differently. For example, we can no longer use the same pass-through commands to write VPD information pages and have them persist across reboots of the IMM - it looks as though those VPD pages are populated from information contained in the IMM. How do we use the Advanced Settings Utility from an external host to communicate with HS22 IMMs? Alternatively, what TCP Command Mode commands do we need to send to the AMM to communicate with the IMM? For our purposes, we specifically cannot communicate with the IMM from the blade itself. Specific example: When I send a pass-thru IPMI command via the AMM to the blade BMC to write information (such as MTM, Serial) into VPD page 0x10, it persists on blades with a BMC (HS21 for example). I can send the same IPMI command to write data to the VPD page on the HS22, however it does not persist across reboots of the IMM. What IPMI commands do I need to send to the IMM? What IPMI commands are asu sending when it sets the MTM & Serial?

    Read the article

  • Subversion all or nothing access to repo tree

    - by Glader
    I'm having some problems setting up access to my Subversion repositories on a Linux server. The problem is that I can only seem to get an all-or-nothing structure going. Either everyone gets read access to everything or noone gets read or write access to anything. The setup: SVN repos are located in /www/svn/repoA,repoB,repoC... Repositories are served by Apache, with Locations defined in etc/httpd/conf.d/subversion.conf as: <Location /svn/repoA> DAV svn SVNPath /var/www/svn/repoA AuthType Basic AuthName "svn repo" AuthUserFile /var/www/svn/svn-auth.conf AuthzSVNAccessFile /var/www/svn/svn-access.conf Require valid-user </Location> <Location /svn/repoB> DAV svn SVNPath /var/www/svn/repoB AuthType Basic AuthName "svn repo" AuthUserFile /var/www/svn/svn-auth.conf AuthzSVNAccessFile /var/www/svn/svn-access.conf Require valid-user </Location> ... svn-access.conf is set up as: [/] * = [/repoA] * = userA = rw [/repoB] * = userB = rw But checking out URL/svn/repoA as userA results in Access Forbidded. Changing it to [/] * = userA = r [/repoA] * = userA = rw [/repoB] * = userB = rw gives userA read access to ALL repositories (including repoB) but only read access to repoA! so in order for userA to get read-write access to repoB i need to add [/] userA = rw which is mental. I also tried changing Require valid-user to Require user userA for repoA in subversion.conf, but that only gave me read access to it. I need a way to default deny everyone access to every repository, giving read/write access only when explicitly defined. Can anyone tell me what I'm doing wrong here? I have spent a couple of hours testing and googling but come up empty, so now I'm doing the post of shame.

    Read the article

  • Synchronization of volume snapshots when doing whole system backups

    - by intuited
    Is there a way to guarantee consistency across volumes when doing backups from LVM snapshots? Consider this scenario: Some system upgrade is in progress. It will write some files to the /usr volume, and once completed, will record success in the /var volume. As the upgrade is just about complete, I run a backup script that creates snapshots of the /usr and /var volumes, along with the rest of the system's volumes, and proceeds to create backups from those snapshots. Just before the upgrade's last write/flush on the /usr volume completes, the backup script takes its snapshot of /usr. That write completes, and the upgrade operation's success is quickly recorded in the nebulous depths of /var. The backup script takes a snapshot of /var. The backup script creates backups from the snapshots it has, er, snapshotted. So the result of all of this tomfoolery is that the resulting /usr backup contains a file which is missing a few bits, and the /var backup contains metadata indicating that that file is complete and approved for use. Without delving into the details of which operating systems' system upgrade systems would be unfazed by such trifles, is there a way to avoid such problems? At the least this seems like it could cause some application to fail unexpectedly after restoration of such a backup.

    Read the article

  • Win 2008 R2 - copying TO disk is very slow, copying FROM is more or less okay

    - by avs099
    I have Windows 2008 R2 SP1 with 4 identical SATA disks (Seagate Barracude 7200) in RAID 5 array. It has 4Gb of memory; all recent updates are installed. Problem: when I copy large file from one folder to another, I get about 10MB/s average speed. When I read this file from network share via 1Gbps connection - I get about 25-30 MB/s. Both numbers seems to be low for me - but specifically I'm very frustrated with low write speed. there is no antivirus, no hyper-v, it's just a fileserver - i when i do my tests nobody else reads/write from it (we have only 4 people in a team, so I'm sure). Not sure if that matters, but there is only 1 logic disk "C" with all available space (1400 GB). I'm not an admin at all, so I have no idea where to look and what other information to provide. I did run performance monitor with "% idle time", "avg bytes read", "avg byte write" - here is the screenshot: I'm not sure why there are such obvious spikes. Any idea? Please let me know if you need me to provide more information - what counters should I check, etc. I'm very eager to get this solved. Thank you. UPDATE: we have another Windows 2008 R2 SP1 server with 2 RAID1 arrays - one is disk C (where windows is installed, another one is disk E). It is running Hyper-V and does not have antivirus. I noticed the following behavior when I copy large file (few GBs): C - C: about 50MB/sec C - E: about 55MB/sec E - E: 8MB/sec!!! E - C: 8MB/sec!!! what could cause this?? E drive is RAID1 array from same Seagate Barracuda 1TB drives..

    Read the article

  • MySQL Master-Master w/ multiple read slave cost effective setup in AWS

    - by Ross
    I've been evaluating Amazon Web Services RDS for MySQL and costing out potential scenarios involving a simple multi-AZ deployment read/write setup vs. a multi-AZ deployment mysql master (hot-standby) with additional read-only slaves. the issue I'm trying to cost-optimize includes their reserved instance vs on-demand instances. Situation 1: purchase reserved multi-az setup for Extra-large-hi-mem(17GB RAM) instance for $5200/yr and have my application query the master all the time. the problem is, if I don't need all the resources of the (17GB RAM) all the time and therefore, especially not a hot-standby, what alternatives for savings can a better topology create, like potentially situation 2 below: Situation 2: purchase reserved multi-az setup using smaller master instances than above for the master-master hot-standby to receive the writes only. Then create and load balance several read-only slaves off the master and add/remove and/or scale up/down the read slaves based on demand. This might only cost $1000 + the on-demand usage of the read slaves. My thinking is, if I have a variable read-intensive application load, with low write load, the single level topology in situation 1 means I'm paying for a lot of resources at the write level of topology when I don't need them there. My hope is that situation 2 can yield cost savings from smaller reserved instances on the master-master resource level allowing me to scale up and down and/or out on the read-level according to demand as needed. Does anyone see a downside to doing this or know of some reason this isn't possible with RDS? Any other thoughts or advice always welcome of course. Thanks in advance, R

    Read the article

  • Strange focus bug in Firefox (chrome vs content)

    - by Marius
    Here is a strange bug I'm experiencing in Firefox: I can only use either the chrome, or the content, not both at the same time! For example, I can click on tabs and the toolbar icons, focus the search bar and write in it as well as the address bar, but if I try to click on anything in the content (eg a link or a textfield to write something), then nothing happens. The mouse pointer doesn't change either, it just stays a pointer when I hover over things, and the links I hover don't react either. But if I alt-tab to another program (or click on it in the taskbar), then back to Firefox, then I can use the area that I click on. So if I click somewhere on the webpage to get focus back to Firefox, then I can click on links and write things (like this text), but I cannot click on tabs or refresh or anything else in the chrome. I can't even click on the minimize, restore and close icons! To get focus back on the chrome I have to alt-tab to another program, and then click on the chrome to get back to Firefox to be able to use the chrome again. I've tried closing and starting it again, but the bug is still there. I have experienced this before, but I don't remember what I did to fix it. This bug seems to occur sometimes when I wake up the computer from standby, but I leave by computer in standby all the time, so that is not the only factor.

    Read the article

  • How come my Intel 520 180GB SSD performs extremely poorly?

    - by Willem
    I recently installed a new Intel 520 series 180GB SSD in my brand new MacBook Pro. The system is as follows: Model: MacBook Pro 15-inch, Late 2011 (MacBookPro8,2) Processor: 2.4 GHz Intel Core i7 Memory: 16 GB 1333 MHz DDR3 Graphics: AMD Radeon HD 6770M 1024 MB Software: Mac OS X Lion 10.7.3 Main Drive Bay: Intel 520-series 180GB SATA-3 (6GB/s negotiated link) SSD (Firmware: 400i) [80GB free] Optical Bay: Toshiba 5400 RPM 750GB SATA-2 HDD Trim: Enabled (according to Trim Enabler App) And here are the speeds I'm getting: Read: 412 MB/s Write: 186 MB/s What have I done wrong? Results expected: Read/write both 500MB/s I have seen benchmarks with lesser SSD:s (SATA-2 even) outperform my write-speeds by far. Also, Intel 520 SSD:s are supposed to be the top class of SSD:s. Trim Enabler report: This looks a bit odd compared to screenshots from their site: These is the defined S.M.A.R.T attributes (taken from Intel): And here are my S.M.A.R.T attributes read using smartctl tool from smartmontools: They don't seem very compatible. I'm going to try and look for a S.M.A.R.T attributes reader tool for OS X which might support Intel 520 series.

    Read the article

  • Remote Socket Read In Multi-Threaded Application Returns Zero Bytes or EINTR (104)

    - by user39891
    Hi. Am a c-coder for a while now - neither a newbie nor an expert. Now, I have a certain daemoned application in C on a PPC Linux. I use PHP's socket_connect as a client to connect to this service locally. The server uses epoll for multiplexing connections via a Unix socket. A user submitted string is parsed for certain characters/words using strstr() and if found, spawns 4 joinable threads to different websites simultaneously. I use socket, connect, write and read, to interact with the said webservers via TCP on their port 80 in each thread. All connections and writes seems successful. Reads to the webserver sockets fail however, with either (A) all 3 threads seem to hang, and only one thread returns -1 and errno is set to 104. The responding thread takes like 10 minutes - an eternity long:-(. *I read somewhere that the 104 (is EINTR?), which in the network context suggests that ...'the connection was reset by peer'; or (B) 0 bytes from 3 threads, and only 1 of the 4 threads actually returns some data. Isn't the socket read/write thread-safe? I use thread-safe (and reentrant) libc functions such as strtok_r, gethostbyname_r, etc. *I doubt that the said webhosts are actually resetting the connection, because when I run a single-threaded standalone (everything else equal) all things works perfectly right, but of course in series not parallel. There's a second problem too (oops), I can't write back to the client who connect to my epoll-ed Unix socket. My daemon application will hang and hog CPU 100% for ever. Yet nothing is written to the clients end. Am sure the client (a very typical PHP socket application) hasn't closed the connection whenever this is happening - no error(s) detected either. Any ideas? I cannot figure-out whatever is wrong even with Valgrind, GDB or much logging. Kindly help where you can.

    Read the article

  • Allignment of ext3 partition on LVM RAID volume group

    - by John P
    I'm trying to add a partition on a LVM that resides on a RAID6 volume group and fdisk is complaining about the partition not residing on a physical sector boundry. My question is, how do you calculate the correct starting sector for a partition on a LVM? This partition will be formated ext3. Would it be better to just format the LVM directly instead of creating a new partition? Disk /dev/dedvol/backup: 2199.0 GB, 2199023255552 bytes 255 heads, 63 sectors/track, 267349 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 1048576 bytes / 8388608 bytes Disk identifier: 0x4e428f49 Device Boot Start End Blocks Id System /dev/dedvol/backup1 63 267349 2146982827+ 83 Linux Partition 1 does not start on physical sector boundary. lvdisplay /dev/dedvol/backup --- Logical volume --- LV Name /dev/dedvol/backup VG Name dedvol LV UUID OV2n5j-7LHb-exJL-t8dI-dU8A-2vxf-uIicCt LV Write Access read/write LV Status available # open 0 LV Size 2.00 TiB Current LE 524288 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 32768 Block device 253:1 vgdisplay dedvol --- Volume group --- VG Name dedvol System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 3 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 1 Max PV 0 Cur PV 1 Act PV 1 VG Size 14.55 TiB PE Size 4.00 MiB Total PE 3815448 Alloc PE / Size 3670016 / 14.00 TiB Free PE / Size 145432 / 568.09 GiB VG UUID 8fBcOk-aXGx-P3Qy-VVpJ-0zK1-fQgy-Cb691J

    Read the article

  • Using a named pipe to simulate a serial port on a VMware virtual machine (linux host and client)

    - by Dave M
    Trying to write a python program to create a simulated data stream and feed it, through a named pipe, to a VMware virtual machine. The host is running Ubuntu 11.10 and VMware player 5.0.0. The Vm is running Ubuntu netbook 10.04. I am able to get the pipe working on the local machine but I am not able to get the pipe to pass data through the virtual serial port to the programs running on the virtual machine. #!/usr/bin/python import os # # Create a named pipe that will be used as the serial port on a VMware virtual machine SerialPipe = '/tmp/gpsd2NMEA' try: os.unlink(SerialPipe) except: pass os.mkfifo(SerialPipe) # # Open the named pipe NMEApipe = os.open(SerialPipe, os.O_RDWR|os.O_NONBLOCK) # # Write a string to the named pipe NMEAtime = "235959" os.write(NMEApipe, str( '%s\n' % NMEAtime )) Test to see if the python program is working on the host machine (displays 235959 if data is passing through the pipe) $ cat /tmp/gpsd2NMEA 235959 Serial port as defined in the VMware .vmx file: serial0.present = "TRUE" serial0.startConnected = "TRUE" serial0.fileType = "pipe" serial0.fileName = "/tmp/gpsd2NMEA" serial0.pipe.endPoint = "client" serial0.autodetect = "FALSE" serial0.tryNoRxLoss = "TRUE" serial0.yieldOnMsrRead = "TRUE" Test to see if the serial port in the VM is receiving data $ cat /dev/ttyS0 or $ minicom -D /dev/ttyS0 or $ stty -F /dev/ttyS0 cs8 -parenb -cstopb 115200 $ echo < /dev/ttyS0 None of these display any data from the python program.

    Read the article

< Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >