Search Results

Search found 5859 results on 235 pages for 'driver'.

Page 179/235 | < Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >

• Fix for poor hd playback for 11.04 upwards

  - by mark kirby

  Hi guys ive seen loads of posts on this site about poor 720/1080p playback in recent ubuntu versions I had this problem and fixed it so I thought id share it with everyone.... 1 install mplayer 2 install smplayer frontend {in software center} 3 open smplayer 4 go to "OPTIONS" then "PREFRENCES" then "GENRAL" 5 if you have a nvidia card choose "OUTPUT DRIVER" and select "VDPAU" {for ATI or AMD choose xv (0 - ATI Radeon AVIVO video) I dont know if this will work as my card is nvidia but it should) 6 go to performance on the left hand side and set both local and streaming cache to 99999 (this may also fix dvd playback if you set that cache aswell} 7 check the box for "ALLOW HARD FRAME DROP" and set "LOOP FILTER" to skip only on HD 8 Set the "THREDS FOR DECODING OPTION TO THE NUMBER OF CORES YOUR CPU HAS IF YOU HAVE MORE THAN ONE CPU ADD UP ALL THE CORES FOR BEST PERFORMANCE" 9 Enjoy you HD movies again on ubuntu...... I have a pretty avrage machine heres my spec.... 2x Pentium 4 ht 3 ghz Stock dell power and motherboard GFORCE 310 HDMI 24 inch full HD tv as a monitor so any one with dule core cpu should have no problems getting this to work. hope this helps someone out.

  Read the article

• Trendnet tew-424ub wireless not working after update 12.10

  - by dwa

  I updated packages from the software manager and now my wireless won't work. It's a Trendnet tew-424ub iwconfig says lo no wireless extensions. eth0 no wireless extensions. sudo lshw -C network: description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 02 serial: 1c:6f:65:46:e9:d4 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.137 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:de00(size=256) memory:fdaff000-fdafffff memory:fdae0000-fdaeffff memory:fda00000-fda0ffff lsusb: Bus 003 Device 002: ID 0bc2:3332 Seagate RSS LLC Expansion Bus 003 Device 003: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet] Bus 003 Device 006: ID 0457:0163 Silicon Integrated Systems Corp. 802.11 Wireless LAN Adapter Bus 005 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 005: ID 0781:5530 SanDisk Corp. Cruzer Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Help? I'm not sure where to start. I've been browsing forums and such for a long time and nothing I try is working.

  Read the article

• Wireless doesn't work after installing 11.10

  - by Ingram

  I just did a fresh install of 11.10 32 bit and I can't get my wireless to work. I installed the drivers the Broadcom STA wireless drivers through additional drivers and rebooted, but it still doesn't see any wireless networks Did something change in 11.10 that makes the wireless card not work anymore? I was using 10.10 before, and it worked fine. Do I need to go back to 10.10? sudo lshw -C network [sudo] password for user1: *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 10 serial: 00:1f:16:be:55:ff size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 duplex=full firmware=sb v2.19 ip=192.168.0.70 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:43 memory:f0300000-f030ffff *-network UNCLAIMED description: Network controller product: BCM4311 802.11b/g WLAN vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:09:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f0400000-f0403fff

  Read the article

• Boot ubuntu 12.04 in 3D - nomodeset quiet splash install

  - by rahi

  I would like to enable 3D in Ubuntu 12.04. I recently tried to install ubuntu on a new computer. When the installation was complete and I rebooted the machine, I could only see a blank screen. After some searching, I followed this tutorial which instructed me to boot with "nomodeset" enabled. I choose this on the USB I was installing ubuntu 12.04 from. Fortunately, the ubuntu installation on the new computer was successful. When I tried to change the size of the unity launcher icons, I did not see that option (as I see on my other computer running ubuntu 12.04). I tried installing MyUnity and it told me that the computer I had just installed 12.04 to was running in 2D. To my knowledge. all the software is up to date (as I ran the Software Updater). In addition, when I look for Additional Drivers, I see a message that says "No proprietary drivers are in use on this system". When I look under System Details Graphics, I see the Driver as "VESA:Intel Sandybridge/Ivybridge Graphics. When I hold the shift key on when my machine boots up, and type "e" on the Grub menu, I see the following towards the end, "nomodeset quiet splash $vt_handoff". Does this have anything to do with the plain 2D ubuntu 12.04 experience? Again, what I'd like to do now is get the 3D experience on my new machine running 12.04. Please let me know if you need more information.

  Read the article

• My WiFi gets deauthenticated every few minutes or seconds (Reason: 7)

  - by dan

  My Wifi on my new Thinkpad W520 running Natty keeps dropping out and coming back on. Output from dmesg below. Any advice? [30493.687552] wlan0: authenticate with e0:91:f5:ef:7b:b2 (try 1) [30493.689127] wlan0: authenticated [30493.689144] wlan0: associate with e0:91:f5:ef:7b:b2 (try 1) [30493.693592] wlan0: RX AssocResp from e0:91:f5:ef:7b:b2 (capab=0x411 status=0 aid=4) [30493.693595] wlan0: associated [31631.172868] wlan0: deauthenticated from e0:91:f5:ef:7b:b2 (Reason: 7) [31631.211847] cfg80211: All devices are disconnected, going to restore regulatory settings [31631.211868] cfg80211: Restoring regulatory settings [31631.211873] cfg80211: Calling CRDA to update world regulatory domain [31631.215037] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [31631.215042] cfg80211: World regulatory domain updated: [31631.215044] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [31631.215046] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31631.215049] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [31631.215051] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [31631.215053] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31631.215055] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31632.289638] wlan0: authenticate with e0:91:f5:ef:7b:b2 (try 1) [31632.291262] wlan0: authenticated [31632.291276] wlan0: associate with e0:91:f5:ef:7b:b2 (try 1) [31632.295119] wlan0: RX AssocResp from e0:91:f5:ef:7b:b2 (capab=0x411 status=0 aid=4) [31632.295123] wlan0: associated [31886.234836] wlan0: deauthenticated from e0:91:f5:ef:7b:b2 (Reason: 7) [31886.306735] cfg80211: All devices are disconnected, going to restore regulatory settings [31886.306740] cfg80211: Restoring regulatory settings [31886.306744] cfg80211: Calling CRDA to update world regulatory domain

  Read the article

• Black screen with thinkpad edge e525, AMD radeon HD before and after installation, plymouth?

  - by carolien

  I have a new thinkpad edge e525 (which should work) and wanted to try ubuntu (first linux experience). With the ubuntu desktop-cd I had a blackscreen before installation, I could fix that with nomodeset. After the installation, when rebooting I got the black screen again. First I see some ubuntu colour with a green busted stripe. I have the same problem with the live boot, also tried mint live, the stripe gets pink. I installed xubuntu 64bit from an alternate cd and I didnt have problems until de reboot after the installation. Same problem, just a black screen with the green stripe than blackscreen. I tried several things: adding nomodeset to the bootmenu, but than I get: No connection to plymouth and it is stuck at checking the battery status. I tried to replace quiet splash with text. Didnt work either. actually one time I saw a blue booting image before that. I managed to get a root command though via the recovery boot. I didnt dare to just remove the plymouth package. Can I just delete plymouth or do I have to deinstall it as described in several ways. (Problem is, right now the notebook doesnt have a internet connection. And I dont know how to manage it with a usb stick?) Or do I have to install the AMD catalyst driver manually? (Again, how can I do that with an usb stick) I also tried this: Ubuntu hits a black screen after boot. Is there any solution without internet? And if I need internet which is the right one? Please explain step by step what I have to write and so on! Thank you! also tried: set gfxpayload=text and: just remove splash and adding vesafb.nonsense=1 to the grub editor, because I couldnt find it anywhere

  Read the article

• Frequent disconnects using wlan AR9285

  - by John Neil

  I'm getting a large number of disconnects from my wireless when I switched to oneiric server (I did not see these happen with oneiric desktop) from my AR9285 wireless LAN device. Here is the syslog snippet: Oct 17 09:43:17 weather kernel: [ 1537.329138] wlan0: deauthenticated from 00:12:17:7a:8e:42 (Reason: 7) Oct 17 09:43:17 weather kernel: [ 1537.340409] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340423] cfg80211: Restoring regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340435] cfg80211: Calling CRDA to update world regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348571] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348581] cfg80211: World regulatory domain updated: Oct 17 09:43:17 weather kernel: [ 1537.348586] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Oct 17 09:43:17 weather kernel: [ 1537.348594] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348600] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348607] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348613] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348620] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Here is the relevant lspci output: # lspci | grep Atheros 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) I have done quite a bit of searching and saw discussions for previous versions of ubuntu that recommended installing the linux-backports-modules package. However, this does not appear to be available for oneiric (just the headers are listed as a package). Any advice on how to achieve a stable wireless connection for this server? It's location mitigates against using a wired connection.

  Read the article

• Need to run a .sh as root on boot or login

  - by Graymayre

  Still new with linux and running ubuntu 12.10 I have a wireless stick (ae2500) which has known issues that has been partially solved using ndiswrapper. However, to use it I must run the same scripts every time I reboot, effectively uninstalling and reinstalling the driver. I made a .sh file to run every time to make it easy, but I must do the sudo login everytime. There are three solutions I am looking for and although not all are necessary to solve this particular problem, I would still like to know them all for learning purposes. run scripts or file.sh on boot (as well as other programs) run scripts or file.sh automatically with root privileges make the install permanent so as not to have to go through the process every time. Any additional information that can help me regarding this that I did not think to ask (including streamlining my commands), or general knowledge, would be greatly appreciated. Following are the contents of the file. I pretty much just made it as I would have entered it. cd ~/ndiswrapper-1.58rc1 sudo modprobe -rf ndiswrapper sudo rm /etc/modprobe.d/ndiswrapper.conf sudo rm -r /etc/ndiswrapper/* sudo depmod -a sudo make uninstall sudo make sudo make install sudo ndiswrapper -i bcmwlhigh5.inf ndiswrapper -l sudo modprobe ndiswrapper

  Read the article

• Cursor seems to freeze in the first attempt of typing - Unity 3D, 12.04

  - by Denis

  It happens in the first attempt of typing, no matter is after the startup, or 5 minutes later, or then after. The cursor (or maybe it's the system) seems to freeze, no matter the application I use, taking up 5 sec to appear what is typed. Subsequently, everything is normal, using another applications. @Anwar Shah suggested it could be a daemon waiting to run before the lauching of the first application. Turning off Zeitgest didn't help. It occurs only with Unity-3d. Tested with Unity-2d, everything is fine. Tried to change some Compiz settings, nothing worked, although not tested with every single parameter. Also I deactivated Ati proprietary driver, no effect. My system: AMD E350 1.6Gh, 2G-Ram, ATI graphics - Ubuntu 12.04, 64bits. Update 1: the cursor is blinking normally before I start typing. After the first character (which is not showed), seems to freeze, taking 5 seconds to get normal again. Very annoying, specially when you want to access login sites. Update 2: I tested on a different and old machine (Athlon 64 4800 x2, 4Gb ram, no problems - takes 2 seconds, acceptable. I think it could be related to my specific hardware (Samsung RV415), but not sure about it. Anyone experiencing something similar? Is that what I should expect, or can be fixed or improved? Thanks.

  Read the article

• team viewer 8 beta wont run

  - by Conner Jones

  I installed team viewer 7 and then one of my friends using windows got version 8 so I installed the beta of version 8 for linux. When I try to run it for terminal I get these errors i atempted to do as the comment bellow said and when trying to run teamveiwer i stil got an error conner@DemonicGrace:~$ teamviewer Init... Checking setup... Launching TeamViewer... wine: cannot find L"C:\windows\system32\winemenubuilder.exe" err:wineboot:ProcessRunKeys Error running cmd L"C:\windows\system32\winemenubuilder.exe -a -r" (2) err:winedevice:ServiceMain driver L"MountMgr" failed to load err:secur32:SECUR32_initSchannelSP libgnutls not found, SSL connections will fail fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),0,3,(nil),0,(nil)) - stub! fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:process:SetProcessShutdownParameters (00000100, 00000000): partial stub. fixme:resource:GetGuiResources (0xffffffff,0): stub fixme:win:EnumDisplayDevicesW ((null),0,0x32df64,0x00000000), stub! fixme:win:EnumDisplayDevicesW (L"\\.\DISPLAY1",0,0x32dc1c,0x00000000), stub! fixme:win:EnumDisplayDevicesW ((null),1,0x32df64,0x00000000), stub! please help me out if anyone has ideas im more than willing to listen

  Read the article

• How to know why my cd is not booting?

  - by Tom Brito

  I have downloaded Ubuntu 10.10 and burned the ISO but it will not boot. I discarded problems with the ISO, as I've downloaded from the official website with no errors, and burned it with no errors. I discarded problems with the burning, as looks like it was recorded with no errors here and later in another computer. I discarded problems with my DVD reader as other cds boots fine. I'm currently using Ubuntu 9.10, I know I can upgrade via internet, but I have this same problem with my Windows XP cd, so I really would like to discover what's going on here.. My Ubuntu 9.10 cd boots just right, but the new one not. What else can be? Or what more precise tests can I make to discover where's the problem? --More info What happens when I try to boot with the Ubuntu 10.10 cd is that it behavior like there's no bootable cd in the drive. It just don't find the boot on the cd, and start the HD system. My notebook is an Amazon PC Intel Celeron 1.5 with 2Gb memory, a DVD-RW driver, HD samsung with 260GB.

  Read the article

• 12.10 Wireless hotspot configuration and internet browsing - question

  - by Indian

  In our campus we have a leased line connection from a service provider, which has an external IP W.X.Y.Z. This connection is distributed from the server several sub-networks / subnets as follows: Faculty: 172.33....../ 255.255.0.0 Administration: 172.34......./255.255.255.0 Students: 172.35...../255.255.216.0 A student has a laptop with a fixed IP address 172.35.23.123 / 255.255.216.0 where the IP address is on the ethernet port. The gateways for internet access are 172.31.1.1 and 172.31.1.2. Further the student has a wireless port which is inaccessible in the hostel area. The OS of the student is Ubuntu 12.10. The student in the possession of an android phone on which he wishes to install specific software and therefore wishes to activate the internet therein. The student has already attempted the Wireless hotspot solution which works for 12.04 but has not been successful. Various instructions on the internet have helped the student to do the following Installation of dhcp server and hostapd: sudo apt-get install isc-dhcp-server sudo apt-get install hostapd File: /etc/network/interfaces auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 10.10.0.1 netmask 255.255.255.0 dns-nameservers 172.31.1.1 172.31.1.2 File: /etc/dhcp/dhcpd.conf subnet 10.10.0.0 netmask 255.255.255.0 { range 10.10.0.2 10.10.0.4; option routers 10.10.0.1; option domain-name-servers 172.31.1.1 172.31.1.2; default-lease-time 6000; max-lease-time 72000; } File: /etc/hostapd/hostapd.conf interface=wlan0 driver=nl80211 ssid=my_hotspot channel=1 hw_mode=g auth_algs=1 wpa=3 wpa_passphrase=1234567890 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP CCMP rsn_pairwise=CCMP File: /etc/default/hostapd RUN_DAEMON=”yes” DAEMON_CONF=”/etc/hostapd/hostapd.conf” DAEMON_OPTS=”-dd” File: /etc/default/isc-dhcp-server INTERFACES=”wlan0” File: /etc/rc.local iptables -t nat -A POSTROUTING -s 10.10.0.0/16 -o eth0 -j MASQUERADE exit 0 After all the configuration, the computer is restarted. The student can see that the hotspot named “my_hotspot” is available. The hotspot also awards an address to the android phone. The student will now be able to browse the internet.

  Read the article

• No Wireless In Ubuntu 13.10

  - by viktorhubinette

  When I upgraded to Ubuntu 13.10, I can't connect to wireless. The only thing I can connect to is ethernet, so please help me, What should I do? Here is the output of the lspci -nnk | grep -i net -A2 00:19.0 ethernet controller [0200]:intel corporation 82579V Gigabit network connection [8086:1503] (rev 04) subsystem: acer incorporated [ALI Device] [1025:8000] Kernel driver in use : e100e output of lsusb: Bus 002 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:0152 Realtek Semiconductor Corp. Mass Storage Device Bus 001 Device 040: ID 04e8:6863 Samsung Electronics Co., Ltd Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 004: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter Bus 003 Device 003: ID 045e:070f Microsoft Corp. Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• dual monitors and unity - ati radeon cards

  - by michiel

  I have a vaio laptop with an ATI Radeon video card and an external screen. I used to run dual monitors on Ubuntu 10.10 fine, but recently decided to upgrade to 11.10 via 11.04 I don't think it's the video card or the fglrx driver. It seems to be unity. When I start up, the laptop screen is normal and the external screen is all white, although I can move my mouse over it. However, the cursor becomes the big X that used to be cursor of the first versions of Xwindows. I can right click on it, and it brings up the context menu for the desktop. And then, all of a sudden, it shows my desktop background. I can continue to move my mouse over the external screen, and now the cursor is normal (little white arrow). But I can't do anything any longer (not even the context menu as before), and trying to drag a window to it (which always worked on 10.10) doesn't work. I actually really like unity. It gives me the most our of my desktop, and uses all space available, which is great. But how can I get my second screen back? I tried unity 2D, but the result is the same. Edit: I think I stumbled on this bug: https://bugs.launchpad.net/ubuntu/+source/nvidia-settings/+bug/882143

  Read the article

• Connected to wireless, but no internet access

  - by boogaloo

  After installing Ubuntu 12.04 a week ago wireless internet had been working fine. It stopped working yesterday, however, and I'm at a loss for what to do even after scouring replies to similar posted problems. I have tried using Google's public DNS and turning off proxy settings on Firefox. I have used nm-tool and lshw to make sure my wireless device and driver are connected. If anyone can help me resolve this issue I would be extremely grateful! @kregerjd $ ping -c3 www.google.com ping: unknown host www.google.com @Alaa: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 192.168.1.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 $ ping -c4 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data From 192.168.1.104 icmp_seq=1 Destination Host Unavailable From 192.168.1.104 icmp_seq=2 Destination Host Unavailable --- 192.168.1.1 ping statistics --- 4 packets transmitted, 0 received, +2 errors, 100% packet loss, time 2998ms pipe 4

  Read the article

• Ubuntu 12.04 server froze during the first boot after it was installed.

  - by user69021

  I installed Ubuntu server 12.04 to my new server and it failed on the first boot. It just stopped and I can't proceed any further. Server's specifications: Dell PowerEdge T620 CPU : Xeon E5-2665 2.4G x 2 RAM : 8GB RDIMM, 1333MHz x 12 HDD : 3TB Near Line SAS 7.2K x 8 RAID controller : PERC H710 GPU : NVIDIA Tesla C2075 x 4 I have a screenshot of the screen it stopped on but I cannot attach it because my privilege level is currently too low. ![freeze on boot][1] Here are the last messages while booting. [5.048743] Freeing unused kernel memory : 920k freed [5.049046] Write protecting the kernel read-only data : 12288k [5.052973] Freeing unused kernel memory : 1608k freed [5.056132] Freeing unused kernel memory : 1196k freed Loading, please wait... [5.070236] udevd[218]: starting version 175 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [5.089030] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011 [5.089518] megasas: 0x1000:0x005b:0x1028:0x1f35: bus 1:slot 0:func 0 [5.089739] megaraid_sas 0000:01:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34 [5.089937] megasas: FW now in Ready state [5.090427] dca service started, version 1.12.1 [5.091463] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k [5.091578] Copyright (c) 2007-2011 Intel Corporation. [5.091712] igb 0000:06:00.0: PCI INT A -> GSI 16 (level,low) -> IRQ 16 [5.111090] megasas:IOC Init cmd success [5.123124] usb 1-1:new high-speed USB device number 2 using ehci_hcd What can I do about this?

  Read the article

• The Correct Usage of DLLs with a DirectX Game?

  - by smoth190

  I'm using DirectX 10 (in C++) to make a game engine, and a test driver program on top of it. Now that I've written many messy rough drafts of an engine, I want to make the final (or sorta final) clean version. I choose to follow how I've seen other engines do it, and that's to have all the core nasty messy crap in a DLL, and then you can create games with just a few functions (well, not really :D). However, I'm unsure of what nasty messy crap to put in that DLL. I don't know about speed restrictions with DLLs. What I've done is put my winproc in the DLL, and have a class that takes the messages, and sends them through to the program using the DLL. Then that program does what it needs to do, and calls a rendering functions back in the DLL that renders everything. Only problem is it gets very low FPS (2, to be exact...). I've looked through everything, and I don't know if the way I'm using DLLs in causing this, or its something different. Whether it's the DLLs or not, I still want to know how to use a DLL correctly with a game engine. I like being neat, I hate having to see all those long names of DirectX classes. I use typedef a lot.

  Read the article

• Extension GLX missing...on a desktop PC

  - by Bart van Heukelom

  I just installed Ubuntu 12.10 on a new PC with an Nvidia GTX 560 graphics card, but after installing the Nvidia proprietary drivers (either -current or -current-updates), Unity won't start. When trying to start it manually I get the message "extension GLX missing". I've searched around and found results like this question which point out it's a problem with Nvidia Optimus laptops. However, I don't have this problem on a laptop, but on a desktop PC. lshw output for the graphics card: *-display description: VGA compatible controller product: GF114 [GeForce GTX 560 SE] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nouveau latency=0 resources: irq:16 memory:f4000000-f5ffffff memory:e0000000-e7ffffff memory:e8000000-ebffffff ioport:e000(size=128) memory:f6000000-f607ffff and CPU: *-cpu description: CPU product: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz vendor: Intel Corp. physical id: 40 bus info: cpu@0 version: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz slot: SOCKET 0 size: 1600MHz capacity: 3800MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms cpufreq configuration: cores=4 enabledcores=4 threads=4

  Read the article

• Internet Timeouts with TP-Link TL-WN821N v2 wireless usb stick

  - by user1622959

  A short time after accessing the internet, the browser/download times out. Before the timeout, the internet works OK briefly; afterwards, the wireless is still connected with a strong signal, but every internet access results in a timeout. When I leave the PC for a while, the internet is back just to timeout again as soon as I start using it. The same happens when I reconnect to the router. Also, when I surf the internet, it takes a couple of minutes until the timeout, but when I download something, it times out in a matter of seconds. The wireless adapter works just fine in Windows and internet via ethernet cable works just fine in Ubuntu. Does anyone have the same problem or knows a solution. I use Ubuntu 12.10 x64. The problem occurs since I installed ubuntu (which was a few days ago). Here some stuff that might be usefull: serus@serus-Ubuntu-PC:~$ lsusb Bus 002 Device 002: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 802.11n [Atheros AR9170] serus@serus-Ubuntu-PC:~$ lsmod Module Size Used by carl9170 82083 0 serus@serus-Ubuntu-PC:~$ modinfo carl9170 filename: /lib/modules/3.5.0-21- generic/kernel/drivers/net/wireless/ath/carl9170/carl9170.ko alias: arusb_lnx alias: ar9170usb firmware: carl9170-1.fw description: Atheros AR9170 802.11n USB wireless serus@serus-Ubuntu-PC:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"virginmedia0137463" Mode:Managed Frequency:2.462 GHz Access Point: A0:21:B7:F8:29:B6 Bit Rate=240 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=66/70 Signal level=-44 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:1399 Invalid misc:18 Missed beacon:0 serus@serus-Ubuntu-PC:~$ sudo lshw -C network *-network description: Wireless interface physical id: 1 bus info: usb@2:2 logical name: wlan0 serial: 00:27:19:bb:00:19 capabilities: ethernet physical wireless configuration: broadcast=yes driver=carl9170 driverversion=3.5.0-21-generic firmware=1.9.4 ip=192.168.0.6 link=yes multicast=yes wireless=IEEE 802.11bgn

  Read the article

• How to get Wifi Working Properly - I am Noob

  - by user287853

  I'm a noob to Ubuntu, but not computers. I installed a full version of Ubuntu version 12 whatever it is. I run it on a machine that has Win7/Win8 on another hard drive. My wireless adapter is some tiny USB stick I got on eBay - it works great in Windows, but I can't get it to work in Ubuntu. More precisely, Ubuntu is providing me a list (sometimes) of wireless networks in the area and when I try to connect to mine it just keeps password prompting me even though the one I use is correct. I looked over all the settings multiple times and don't believe there is anything in error regarding what it takes to connect to my network. So, I thought maybe it is a driver issue and came across NDIS. I thought I should try installing it, but I don't know how when I can't connect the Ubuntu machine to the Internet. I tried some commands to no avail. I have the Ubuntu installation disc and it shows a NDIS common and utils .deb files in there. Can someone out there help me out to get this wireless setup so I can get online?

  Read the article

• How to create an GUI that communicate with the USB Devices

  - by VINAYAK

  I am doing my Project using win 32 programming.I am just learning about win32 programming and able to create an UI.I want to communicate with an USB Device with that UI.SO,How can i go for that?Is there any predefined functions will be there are we need to create the function for communicating with the OS and get the devices List and got the details about them. My purpose is to , 1.Creating an UI that tells about the Basic information about the device(We want to send a control request to the device to get the descriptors). 2.For that first of all i want to communicate with the OS for device attachment.That will lead to get the information about the device and Enumeration takes place and then only i request the device information through descriptors by using standard Requests. 3.And also i want to create the driver for my device.That will also need to achieve for communicating with OS(Windows). So,can anyone help me about this?How can i achieve this or approach this? Note: I am at the entry level now so anyone give response will be in a detailed format like step by step process would be appreciable.

  Read the article

• crippling repeating "pciehp card not present" notifications

  - by Nanne

  When using ubuntu (12.04, both installed and on a live usb) I get a lot of these messages: pciehp 0000:00:1c.5:pcie04: Card not present on Slot(37) pciehp 0000:00:1c.5:pcie04: Card present on Slot(37) And with a lot I mean about 20 per second. This has a crippling effect, and I would like to get rid of it :) The computer is a packard bell easynote BG48-U-100 DC. I tip I picked up from some fedora/redhat error here was to look at lspci -vnn. I have pasted the part about "00:1c.5" here: http://pastebin.com/0sfsiqW2 For what good it may do, here is the lsmod of my machine: http://pastebin.com/DQZy1kAL From that first pastebin I think to conclude that it has to do with the module shpchp, which seems to me (aka: google) to have something to do with ACPI. That's as far as I've come in disecting this. Can anyone help me along further? What can I do, check etc? I did see this topic but my intentions are not to surpress the error message: I know how to do this (from that topic ;) ), but I'm looking for a real sollution. Finding the problem on the internet does suspect me to believe it is neither an ubuntu specific nor a packard-bell specific problem.If you google the problem it seems that is present on several other distribution/hardware combo's as well, and it looks like the advice is to remove one of the drivers? I have no clue as to which driver I should look at and and what would be the effect of just removing it. I have seen this topic which is old-ish, but describes my problem and is about a similar computer. The solution in this topic was to compile a new kernel using a spanish guide, which seems a bit extreme to me, so I'm kinda hoping for a better solution than that.

  Read the article

• Pandaboard crash on startup or freeze after minutes

  - by Meach

  I just received my Pandaboard ES (rev B) and I am having trouble after installing ubuntu-omap4-addons. Once I copied the image ubuntu-12.04-preinstalled-desktop-armhf+omap4.img on my sd card and boot the pandaboard with it, I run the following commands: sudo add-apt-repository ppa:tiomap-dev/release sudo apt-get update sudo apt-get dist-upgrade sudo apt-get install ubuntu-omap4-extras At the end of the installation of ubuntu-omap4-extras, Ubuntu tells me that a problem occurs when the console displays: ldconfig deferred processing now taking place Clicking on "report the problem" tell me that the problem concerns pvr-omap4-dkms. I read somewhere that this can happen and it is better to reinstall pvr-omap4-dkms. Which I am doing by running: sudo apt-get install --reinstall pvr-omap4-dkms I reboot. Then the board has sometimes difficulties to start Ubuntu: it freezes during the loading page, only action I can do is unplugging the board to start it again. Some other times, Ubuntu load successfully but then freeze at another random time, in the range 20 - 40 minutes. I searched on internet for similar bug and found this: https://bugs.launchpad.net/ubuntu/+source/linux-ti-omap4/+bug/971091 So I typed this in: update-rc.d ondemand disable apt-get -y install cpufrequtils echo 'ENABLE="true" GOVERNOR="performance" MAX_SPEED="0" MIN_SPEED="0"' > /etc/default/cpufrequtils cpufreq-set -r -g performance reboot But it doesn't seems to fix the bug. Another detail: on startup, before the loading screen of Ubuntu (when there is the two penguins displayed :)), it shows this: [0.297271] CPU1: Unknown IPI message 0x1 [0.308990] omap_hwmod: mcpdm: _wait_target_ready error: -16 [0.354705] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [0.354766] omap_hwmod_mux_init: Could not allocate device mux entry [2.107086] thermal_get_slope:Getting slope is not supported for domain gpu [2.107116] thermal_get_offset:Getting offset is not supported for domain gpu [2.107299] stm_fw: vendor driver stm_ti1.0 registered [8.725555] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0! debug=0 Any idea what can be wrong? I am not that good with Ubuntu so any help will be appreciated. Cheers! Meach

  Read the article

• How do I require use of the 5 GHz band when connecting to a Wireless N access point?

  - by cqcallaw

  What is says in the topic: there's a Wireless N access point to which I'd like to connect using the 5 GHz band exclusively. How does one accomplish this? Using the directive band=a in the connection configuration file in /etc/NetworkManager/system-connections doesn't seem to affect anything (/var/log/syslog still shows attempts by wpa_supplicant to connect using the 2.4 GHz band), and running iwconfig wlan0 freq 5G per this question results in the following error: Error for wireless request "Set Frequency" (8B04) : SET failed on device wlan0 ; Invalid argument. [Edit] I'm hoping the answer won't depend on the hardware in use, but here's some information about the hardware, just in case: System is an Asus ZenBook Prime UX31A-DB51, running Ubuntu 12.04. lspci output: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:04.0 Signal processing controller: Intel Corporation Device 0153 (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 00:1f.6 Signal processing controller: Intel Corporation Panther Point Thermal Management Controller (rev 04) 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) The driver for the wireless interface is iwlwifi.

  Read the article

• How to Deal with an out of touch "Project manager"

  - by Joe

  This "manager" is 70+ yrs old and a math genius. We were tasked with creating a web application. He loves SQL and stored procedures. He first created this in MS access. For the web app I had to take his DB migrate to SQL server. His first thought was to have a master stored procedure with a WAITFOR Handling requests from users. I eventually talked him out of that and use asp.net mvc. Then eventually use the asp.net membership. Now the web app is a mostly handles requests from the pages that is passed to stored procedures. It is all stored procedure driven. The business logic as well. Now we are having an one open DB connection per user logged in plus 1. I use linq to sql to check 2 tables and return the values thats it period. So 25 users is a load. He complains why my code is bad cause his test driver stored procedure simulates over 100 users with no issue. What are the best arguments for not having the business logic not all in stored procedures?? How should I deal with this?? I am giving an abbreviated story of course. He is a genius part owner of the company all the other owners trust him because he is a genius. and quoting -"He gets things done. old school".

  Read the article

< Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >