Search Results

Search found 13006 results on 521 pages for 'exception'.

Page 179/521 | < Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >

• SQL Server Configuration timeouts - and a workaround [SSIS]

  - by jamiet

  Ever since I started writing SSIS packages back in 2004 I have opted to store configurations in .dtsConfig (.i.e. XML) files rather than in a SQL Server table (aka SQL Server Configurations) however recently I inherited some packages that used SQL Server Configurations and thus had to immerse myself in their murky little world. To all the people that have ever gone onto the SSIS forum and asked questions about ambiguous behaviour of SQL Server Configurations I now say this... I feel your pain! The biggest problem I have had was in dealing with the change to the order in which configurations get applied that came about in SSIS 2008. Those changes are detailed on MSDN at SSIS Package Configurations however the pertinent bits are: As the utility loads and runs the package, events occur in the following order: The dtexec utility loads the package. The utility applies the configurations that were specified in the package at design time and in the order that is specified in the package. (The one exception to this is the Parent Package Variables configurations. The utility applies these configurations only once and later in the process.) The utility then applies any options that you specified on the command line. The utility then reloads the configurations that were specified in the package at design time and in the order specified in the package. (Again, the exception to this rule is the Parent Package Variables configurations). The utility uses any command-line options that were specified to reload the configurations. Therefore, different values might be reloaded from a different location. The utility applies the Parent Package Variable configurations. The utility runs the package. To understand how these steps differ from SSIS 2005 I recommend reading Doug Laudenschlager’s blog post Understand how SSIS package configurations are applied. The very nature of SQL Server Configurations means that the Connection String for the database holding the configuration values needs to be supplied from the command-line. Typically then the call to execute your package resembles this: dtexec /FILE Package.dtsx /SET "\Package.Connections[SSISConfigurations].Properties[ConnectionString]";"\"Data Source=SomeServer;Initial Catalog=SomeDB;Integrated Security=SSPI;\"", The problem then is that, as per the steps above, the package will (1) attempt to apply all configurations using the Connection String stored in the package for the "SSISConfigurations" Connection Manager before then (2) applying the Connection String from the command-line and then (3) apply the same configurations all over again. In the packages that I inherited that first attempt to apply the configurations would timeout (not unexpected); I had 8 SQL Server Configurations in the package and thus the package was waiting for 2 minutes until all the Configurations timed out (i.e. 15seconds per Configuration) - in a package that only executes for ~8seconds when it gets to do its actual work a delay of 2minutes was simply unacceptable. We had three options in how to deal with this: Get rid of the use of SQL Server configurations and use .dtsConfig files instead Edit the packages when they get deployed Change the timeout on the "SSISConfigurations" Connection Manager #1 was my preferred choice but, for reasons I explain below*, wasn't an option in this particular instance. #2 was discounted out of hand because it negates the point of using Configurations in the first place. This left us with #3 - change the timeout on the Connection Manager. This is done by going into the properties of the Connection Manager, opening the "All" tab and changing the Connect Timeout property to some suitable value (in the screenshot below I chose 2 seconds). This change meant that the attempts to apply the SQL Server configurations timed out in 16 seconds rather than two minutes; clearly this isn't an optimum solution but its certainly better than it was. So there you have it - if you are having problems with SQL Server configuration timeouts within SSIS try changing the timeout of the Connection Manager. Better still - don't bother using SQL Server Configuration in the first place. Even better - install RC0 of SQL Server 2012 to start leveraging SSIS parameters and leave the nasty old world of configurations behind you. @Jamiet * Basically, we are leveraging a SSIS execution/logging framework in which the client had invested a lot of resources and SQL Server Configurations are an integral part of that.

  Read the article

• Cocos2d-xna memory management for WP8

  - by Arkiliknam

  I recently upgraded to VS2012 and try my in dev game out on the new WP8 emulators but was dismayed to find out the emulator now crashes and throws an out of memory exception during my sprite loading procedure (funnily, it still works in WP7 emulators and on my WP7). Regardless of whether the problem is the emulator or not, I want to get a clear understanding of how I should be managing memory in the game. My game consists of a character whom has 4 or more different animations. Each animation consists of 4 to 7 frames. On top of that, the character has up to 8 stackable visualization modifications (eg eye type, nose type, hair type, clothes type). Pre memory issue, I preloaded all textures for each animation frame and customization and created animate action out of them. The game then plays animations using the customizations applied to that current character. I re-looked at this implementation when I received the out of memory exceptions and have started playing with RenderTexture instead, so instead of pre loading all possible textures, it on loads textures needed for the character, renders them onto a single texture, from which the animation is built. This means the animations use 1/8th of the sprites they were before. I thought this would solve my issue, but it hasn't. Here's a snippet of my code: var characterTexture = CCRenderTexture.Create((int)width, (int)height); characterTexture.BeginWithClear(0, 0, 0, 0); // stamp a body onto my texture var bodySprite = MethodToCreateSpecificSprite(); bodySprite.Position = centerPoint; bodySprite.Visit(); bodySprite.Cleanup(); bodySprite = null; // stamp eyes, nose, mouth, clothes, etc... characterTexture.End(); As you can see, I'm calling CleanUp and setting the sprite to null in the hope of releasing the memory, though I don't believe this is the right way, nor does it seem to work... I also tried using SharedTextureCache to load textures before Stamping my texture out, and then clearing the SharedTextureCache with: CCTextureCache.SharedTextureCache.RemoveAllTextures(); But this didn't have an effect either. Any tips on what I'm not doing? I used VS to do a memory profile of the emulation causing the crash. Both WP7.1 and WP8 emulators peak at about 150mb of usage. WP8 crashes and throws an out of memory exception. Each customisation/frame is 15kb at the most. Lets say there are 8 layers of customisation = 120kb but I render then onto one texture which I would assume is only 15kb again. Each animation is 8 frames at the most. That's 15kb for 1 texture, or 960kb for 8 textures of customisation. There are 4 animation sets. That's 60Kb for 4 sets of 1 texture, or 3.75MB for 4 sets of 8 textures of customisation. So even if its storing every layer, its 3.75MB.... no where near the 150mb breaking point my profiler seems to suggest :( WP 7.1 Memory Profile (max 150MB) WP8 Memory Profile (max 150MB and crashes)

  Read the article

• MSMQ messages using HTTP just won't get delivered

  - by John Breakwell

  I'm starting off the blog with a discussion of an unusual problem that has hit a couple of my customers this month. It's not a problem you'd expect to bump into and the solution is potentially painful. Scenario You want to make use of the HTTP protocol to send MSMQ messages from one machine to another. You have installed HTTP support for MSMQ and have addressed your messages correctly but they will not leave the outgoing queue. There is no configuration for HTTP support - setup has already done all that for you (although you may want to check the most recent "Installation of the MSMQ HTTP Support Subcomponent" section of MSMQINST.LOG to see if anything DID go wrong) - so you can't tweak anything. Restarting services and servers makes no difference - the messages just will not get delivered. The problem is documented and resolved by Knowledgebase article 916699 "The message may not be delivered when you use the HTTP protocol to send a message to a server that is running Message Queuing 3.0". It is unlikely that you would be able to resolve the problem without the assistance of PSS because there are no messages that can be seen to assist you and only access to the source code exposes the root cause. As this communication is over HTTP, the IIS logs would be a good place to start. POST entries are logged which show that connectivity is working and message delivery is being attempted: #Software: Microsoft Internet Information Services 6.0 #Version: 1.0 #Date: 2006-09-12 12:11:29 #Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status 2006-09-12 12:12:12 W3SVC1 10.1.17.219 POST /msmq/private$/test - 80 - 10.2.200.3 - 200 0 0 If you capture the traffic with Network Monitor you can see the POST being sent to the server but you also see a response being returned to the client: HTTP: Response to Client; HTTP/1.1; Status Code = 500 - Internal Server Error "Internal Server Error" means we can probably stop looking at IIS and instead focus on the Message Queuing ISAPI extension (Mqise.dll). MSMQ 3.0 (Windows XP and Windows Server 2003) comes with error logging enabled by default but the log files are in binary format - MSMQ 2.0 generated logging in plain text. The symbolic information needed for formatting the files is not currently publicly available so log files have to be sent in to Microsoft PSS.  Although this does mean raising a support case, formatting the log files to text and returning them to the customer shouldn't take long. Obviously the engineer analyses them for you - I just want to point out that you can see the logging output in text format if you want it. The important entries in the log for this problem are: [7]b48.928 09/12/2006-13:20:44.552 [mqise GetNetBiosNameFromIPAddr] ERROR:Failed to get the NetBios name from the DNS name, error = 0xea [7]b48.928 09/12/2006-13:20:44.552 [mqise RPCToServer] ERROR:RPC call R_ProcessHTTPRequest failed, error code = 1702(RPC_S_INVALID_BINDING) which allow a Microsoft escalation engineer to check the MQISE source code to see what is going wrong. This problem according to the article occurs when the extension tries to bind to the local MSMQ service after the extension receives a POST request that contains an MSMQ message. MSMQ resolves the server name by using the DNS host name but the extension cannot bind to the service because the buffer that MSMQ uses to resolve the server name is too small - server names that are exactly 15 characters long will not fit. RPC exception 0x6a6 (RPC_S_INVALID_BINDING) occurs in the W3wp.exe process but the exception is handled and so you do not receive an error message. The workaround is to rename the MSMQ server to something less than 15 characters. If the problem has only just been noticed in a production environment - an application may have been modified to get through a newly-implemented firewall, for example - then renaming is going to be an issue. Other applications may need to be reinstalled or modified if server names are hard-coded or stored in the registry. The renaming may also break a company naming convention where the name is built up from something like location+department+number. If you want to learn more about MSMQ logging then check out Chapter 15 of the MSMQ FAQ. In fact, even if you DON'T want to learn anything about MSMQ logging you should read the FAQ anyway as there is a huge amount of useful information on known issues and the like.

  Read the article

• Error Handling Examples(C#)

  “The purpose of reviewing the Error Handling code is to assure that the application fails safely under all possible error conditions, expected and unexpected. No sensitive information is presented to the user when an error occurs.” (OWASP, 2011) No Error Handling The absence of error handling is still a form of error handling. Based on the code in Figure 1, if an error occurred and was not handled within either the ReadXml or BuildRequest methods the error would bubble up to the Search method. Since this method does not handle any acceptations the error will then bubble up the stack trace. If this continues and the error is not handled within the application then the environment in which the application is running will notify the user running the application that an error occurred based on what type of application. Figure 1: No Error Handling public DataSet Search(string searchTerm, int resultCount) { DataSet dt = new DataSet(); dt.ReadXml(BuildRequest(searchTerm, resultCount)); return dt; } Generic Error Handling One simple way to add error handling is to catch all errors by default. If you examine the code in Figure 2, you will see a try-catch block. On April 6th 2010 Louis Lazaris clearly describes a Try Catch statement by defining both the Try and Catch aspects of the statement. “The try portion is where you would put any code that might throw an error. In other words, all significant code should go in the try section. The catch section will also hold code, but that section is not vital to the running of the application. So, if you removed the try-catch statement altogether, the section of code inside the try part would still be the same, but all the code inside the catch would be removed.” (Lazaris, 2010) He also states that all errors that occur in the try section cause it to stops the execution of the try section and redirects all execution to the catch section. The catch section receives an object containing information about the error that occurred so that they system can gracefully handle the error properly. When errors occur they commonly log them in some form. This form could be an email, database entry, web service call, log file, or just an error massage displayed to the user.  Depending on the error sometimes applications can recover, while others force an application to close. Figure 2: Generic Error Handling public DataSet Search(string searchTerm, int resultCount) { DataSet dt = new DataSet(); try { dt.ReadXml(BuildRequest(searchTerm, resultCount)); } catch (Exception ex) { // Handle all Exceptions } return dt; } Error Specific Error Handling Like the Generic Error Handling, Error Specific error handling allows for the catching of specific known errors that may occur. For example wrapping a try catch statement around a soap web service call would allow the application to handle any error that was generated by the soap web service. Now, if the systems wanted to send a message to the web service provider every time a soap error occurred but did not want to notify them if any other type of error occurred like a network time out issue. This would be varying tedious to accomplish using the General Error Handling methodology. This brings us to the use case for using the Error Specific error handling methodology.  The Error Specific Error handling methodology allows for the TryCatch statement to catch various types of errors depending on the type of error that occurred. In Figure 3, the code attempts to handle DataException differently compared to how it potentially handles all other errors. This allows for specific error handling for each type of known error, and still allows for error handling of any unknown error that my occur during the execution of the TryCatch statement. Figure 5: Error Specific Error Handling public DataSet Search(string searchTerm, int resultCount) { DataSet dt = new DataSet(); try { dt.ReadXml(BuildRequest(searchTerm, resultCount)); } catch (TimeoutException ex) { // Handle Timeout TimeoutException Only } catch (Exception) { // Handle all Exceptions } return dt; }

  Read the article

• Banshee encountered a Fatal Error (sqlite error 11: database disk image is malformed)

  - by Nik

  I am running ubuntu 10.10 Maverick Meerkat, and recently I am helping in testing out indicator-weather using the unstable buids. However there was a bug which caused my system to freeze suddenly (due to indicator-weather not ubuntu) and the only way to recover is to do a hard reset of the system. This happened a couple of times. And when i tried to open banshee after a couple of such resets I get the following fatal error which forces me to quit banshee. The screenshot is not clear enough to read the error, so I am posting it below, An unhandled exception was thrown: Sqlite error 11: database disk image is malformed (SQL: BEGIN TRANSACTION; DELETE FROM CoreSmartPlaylistEntries WHERE SmartPlaylistID IN (SELECT SmartPlaylistID FROM CoreSmartPlaylists WHERE IsTemporary = 1); DELETE FROM CoreSmartPlaylists WHERE IsTemporary = 1; COMMIT TRANSACTION) at Hyena.Data.Sqlite.Connection.CheckError (Int32 errorCode, System.String sql) [0x00000] in <filename unknown>:0 at Hyena.Data.Sqlite.Connection.Execute (System.String sql) [0x00000] in <filename unknown>:0 at Hyena.Data.Sqlite.HyenaSqliteCommand.Execute (Hyena.Data.Sqlite.HyenaSqliteConnection hconnection, Hyena.Data.Sqlite.Connection connection) [0x00000] in <filename unknown>:0 Exception has been thrown by the target of an invocation. at System.Reflection.MonoCMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0 at System.Reflection.MonoCMethod.Invoke (BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0 at System.Reflection.ConstructorInfo.Invoke (System.Object[] parameters) [0x00000] in <filename unknown>:0 at System.Activator.CreateInstance (System.Type type, Boolean nonPublic) [0x00000] in <filename unknown>:0 at System.Activator.CreateInstance (System.Type type) [0x00000] in <filename unknown>:0 at Banshee.Gui.GtkBaseClient.Startup () [0x00000] in <filename unknown>:0 at Hyena.Gui.CleanRoomStartup.Startup (Hyena.Gui.StartupInvocationHandler startup) [0x00000] in <filename unknown>:0 .NET Version: 2.0.50727.1433 OS Version: Unix 2.6.35.27 Assembly Version Information: gkeyfile-sharp (1.0.0.0) Banshee.AudioCd (1.9.0.0) Banshee.MiniMode (1.9.0.0) Banshee.CoverArt (1.9.0.0) indicate-sharp (0.4.1.0) notify-sharp (0.4.0.0) Banshee.SoundMenu (1.9.0.0) Banshee.Mpris (1.9.0.0) Migo (1.9.0.0) Banshee.Podcasting (1.9.0.0) Banshee.Dap (1.9.0.0) Banshee.LibraryWatcher (1.9.0.0) Banshee.MultimediaKeys (1.9.0.0) Banshee.Bpm (1.9.0.0) Banshee.YouTube (1.9.0.0) Banshee.WebBrowser (1.9.0.0) Banshee.Wikipedia (1.9.0.0) pango-sharp (2.12.0.0) Banshee.Fixup (1.9.0.0) Banshee.Widgets (1.9.0.0) gio-sharp (2.14.0.0) gudev-sharp (1.0.0.0) Banshee.Gio (1.9.0.0) Banshee.GStreamer (1.9.0.0) System.Configuration (2.0.0.0) NDesk.DBus.GLib (1.0.0.0) gconf-sharp (2.24.0.0) Banshee.Gnome (1.9.0.0) Banshee.NowPlaying (1.9.0.0) Mono.Cairo (2.0.0.0) System.Xml (2.0.0.0) Banshee.Core (1.9.0.0) Hyena.Data.Sqlite (1.9.0.0) System.Core (3.5.0.0) gdk-sharp (2.12.0.0) Mono.Addins (0.4.0.0) atk-sharp (2.12.0.0) Hyena.Gui (1.9.0.0) gtk-sharp (2.12.0.0) Banshee.ThickClient (1.9.0.0) Nereid (1.9.0.0) NDesk.DBus.Proxies (0.0.0.0) Mono.Posix (2.0.0.0) NDesk.DBus (1.0.0.0) glib-sharp (2.12.0.0) Hyena (1.9.0.0) System (2.0.0.0) Banshee.Services (1.9.0.0) Banshee (1.9.0.0) mscorlib (2.0.0.0) Platform Information: Linux 2.6.35-27-generic i686 unknown GNU/Linux Disribution Information: [/etc/lsb-release] DISTRIB_ID=Ubuntu DISTRIB_RELEASE=10.10 DISTRIB_CODENAME=maverick DISTRIB_DESCRIPTION="Ubuntu 10.10" [/etc/debian_version] squeeze/sid Just to make it clear, this happened only after the hard resets and not before. I used to use banshee everyday and it worked perfectly. Can anyone help me fix this?

  Read the article

• Enhanced Dynamic Filtering

  - by Ricardo Peres

  Remember my last post on dynamic filtering? Well, this time I'm extending the code in order to allow two levels of querying: Match type, represented by the following options: public enum MatchType { StartsWith = 0, Contains = 1 } And word match: public enum WordMatch { AnyWord = 0, AllWords = 1, ExactPhrase = 2 } You can combine the two levels in order to achieve the following combinations: MatchType.StartsWith + WordMatch.AnyWord Matches any record that starts with any of the words specified MatchType.StartsWith + WordMatch.AllWords Not available: does not make sense, throws an exception MatchType.StartsWith + WordMatch.ExactPhrase Matches any record that starts with the exact specified phrase MatchType.Contains + WordMatch.AnyWord Matches any record that contains any of the specified words MatchType.Contains + WordMatch.AllWords Matches any record that contains all of the specified words MatchType.Contains + WordMatch.ExactPhrase Matches any record that contains the exact specified phrase Here is the code: public static IList Search(IQueryable query, Type entityType, String dataTextField, String phrase, MatchType matchType, WordMatch wordMatch, Int32 maxCount) { String [] terms = phrase.Split(' ').Distinct().ToArray(); StringBuilder result = new StringBuilder(); PropertyInfo displayProperty = entityType.GetProperty(dataTextField); IList searchList = null; MethodInfo orderByMethod = typeof(Queryable).GetMethods(BindingFlags.Public | BindingFlags.Static).Where(m = m.Name == "OrderBy").ToArray() [ 0 ].MakeGenericMethod(entityType, displayProperty.PropertyType); MethodInfo takeMethod = typeof(Queryable).GetMethod("Take", BindingFlags.Public | BindingFlags.Static).MakeGenericMethod(entityType); MethodInfo whereMethod = typeof(Queryable).GetMethods(BindingFlags.Public | BindingFlags.Static).Where(m = m.Name == "Where").ToArray() [ 0 ].MakeGenericMethod(entityType); MethodInfo distinctMethod = typeof(Queryable).GetMethods(BindingFlags.Public | BindingFlags.Static).Where(m = m.Name == "Distinct" && m.GetParameters().Length == 1).Single().MakeGenericMethod(entityType); MethodInfo toListMethod = typeof(Enumerable).GetMethod("ToList", BindingFlags.Static | BindingFlags.Public).MakeGenericMethod(entityType); MethodInfo matchMethod = typeof(String).GetMethod ( (matchType == MatchType.StartsWith) ? "StartsWith" : "Contains", new Type [] { typeof(String) } ); MemberExpression member = Expression.MakeMemberAccess ( Expression.Parameter(entityType, "n"), displayProperty ); MethodCallExpression call = null; LambdaExpression where = null; LambdaExpression orderBy = Expression.Lambda ( member, member.Expression as ParameterExpression ); switch (matchType) { case MatchType.StartsWith: switch (wordMatch) { case WordMatch.AnyWord: call = Expression.Call ( member, matchMethod, Expression.Constant(terms [ 0 ]) ); where = Expression.Lambda ( call, member.Expression as ParameterExpression ); for (Int32 i = 1; i ()); where = Expression.Lambda ( Expression.Or ( where.Body, exp ), where.Parameters.ToArray() ); } break; case WordMatch.ExactPhrase: call = Expression.Call ( member, matchMethod, Expression.Constant(phrase) ); where = Expression.Lambda ( call, member.Expression as ParameterExpression ); break; case WordMatch.AllWords: throw (new Exception("The match type StartsWith is not supported with word match AllWords")); } break; case MatchType.Contains: switch (wordMatch) { case WordMatch.AnyWord: call = Expression.Call ( member, matchMethod, Expression.Constant(terms [ 0 ]) ); where = Expression.Lambda ( call, member.Expression as ParameterExpression ); for (Int32 i = 1; i ()); where = Expression.Lambda ( Expression.Or ( where.Body, exp ), where.Parameters.ToArray() ); } break; case WordMatch.ExactPhrase: call = Expression.Call ( member, matchMethod, Expression.Constant(phrase) ); where = Expression.Lambda ( call, member.Expression as ParameterExpression ); break; case WordMatch.AllWords: call = Expression.Call ( member, matchMethod, Expression.Constant(terms [ 0 ]) ); where = Expression.Lambda ( call, member.Expression as ParameterExpression ); for (Int32 i = 1; i ()); where = Expression.Lambda ( Expression.AndAlso ( where.Body, exp ), where.Parameters.ToArray() ); } break; } break; } query = orderByMethod.Invoke(null, new Object [] { query, orderBy }) as IQueryable; query = whereMethod.Invoke(null, new Object [] { query, where }) as IQueryable; if (maxCount != 0) { query = takeMethod.Invoke(null, new Object [] { query, maxCount }) as IQueryable; } searchList = toListMethod.Invoke(null, new Object [] { query }) as IList; return (searchList); } And this is how you'd use it: IQueryable query = ctx.MyEntities; IList list = Search(query, typeof(MyEntity), "Name", "Ricardo Peres", MatchType.Contains, WordMatch.ExactPhrase, 10 /*0 for all*/); SyntaxHighlighter.config.clipboardSwf = 'http://alexgorbatchev.com/pub/sh/2.0.320/scripts/clipboard.swf'; SyntaxHighlighter.brushes.CSharp.aliases = ['c#', 'c-sharp', 'csharp']; SyntaxHighlighter.all();

  Read the article

• Part 15: Fail a build based on the exit code of a console application

  In the series the following parts have been published Part 1: Introduction Part 2: Add arguments and variables Part 3: Use more complex arguments Part 4: Create your own activity Part 5: Increase AssemblyVersion Part 6: Use custom type for an argument Part 7: How is the custom assembly found Part 8: Send information to the build log Part 9: Impersonate activities (run under other credentials) Part 10: Include Version Number in the Build Number Part 11: Speed up opening my build process template Part 12: How to debug my custom activities Part 13: Get control over the Build Output Part 14: Execute a PowerShell script Part 15: Fail a build based on the exit code of a console application When you have a Console Application or a batch file that has errors, the exitcode is set to another value then 0. You would expect that the build would see this and report an error. This is not true however. First we setup the scenario. Add a ConsoleApplication project to your solution you are building. In the Main function set the ExitCode to 1     class Program    {        static void Main(string[] args)        {            Console.WriteLine("This is an error in the script.");            Environment.ExitCode = 1;        }    } Checkin the code. You can choose to include this Console Application in the build or you can decide to add the exe to source control Now modify the Build Process Template CustomTemplate.xaml Add an argument ErrornousScript Scroll down beneath the TryCatch activity called “Try Compile, Test, and Associate Changesets and Work Items” Add an Sequence activity to the template In the Sequence, add a ConvertWorkspaceItem and an InvokeProcess activity (see Part 14: Execute a PowerShell script  for more detailed steps) In the FileName property of the InvokeProcess use the ErrornousScript so the ConsoleApplication will be called. Modify the build definition and make sure that the ErrornousScript is executing the exe that is setting the ExitCode to 1. You have now setup a build definition that will execute the errornous Console Application. When you run it, you will see that the build succeeds. This is not what you want! To solve this, you can make use of the Result property on the InvokeProcess activity. So lets change our Build Process Template. Add the new variables (scoped to the sequence where you run the Console Application) called ExitCode (type = Int32) and ErrorMessage Click on the InvokeProcess activity and change the Result property to ExitCode In the Handle Standard Output of the InvokeProcess add a Sequence activity In the Sequence activity, add an Assign primitive. Set the following properties: To = ErrorMessage Value = If(Not String.IsNullOrEmpty(ErrorMessage), Environment.NewLine + ErrorMessage, "") + stdOutput And add the default BuildMessage to the sequence that outputs the stdOutput Add beneath the InvokeProcess activity and If activity with the condition ExitCode <> 0 In the Then section add a Throw activity and set the Exception property to New Exception(ErrorMessage) The complete workflow looks now like When you now check in the Build Process Template and run the build, you get the following result And that is exactly what we want.   You can download the full solution at BuildProcess.zip. It will include the sources of every part and will continue to evolve.

  Read the article

• initrd.lz is corrupted error occured while installing 11.10

  - by zubendra

  C:\ubuntu\install\boot\initrd.lz is corrupted. Error pop-up comes up every time i am trying to install ubuntu-11.10-desktop-i386 using wubi. error comes when the installation process is almost completed. can anyone suggest a solution for this problem. Its occurring regularly. 03-19 18:01 DEBUG TaskList: ## Running copy_installation_files... 03-19 18:01 DEBUG WindowsBackend: Copying C:\DOCUME~1\HP_OWN~1.YOU\LOCALS~1\Temp\pyl59.tmp\data\custom-installation -> C:\ubuntu\install\custom-installation 03-19 18:01 DEBUG WindowsBackend: Copying C:\DOCUME~1\HP_OWN~1.YOU\LOCALS~1\Temp\pyl59.tmp\winboot -> C:\ubuntu\winboot 03-19 18:01 DEBUG WindowsBackend: Copying C:\DOCUME~1\HP_OWN~1.YOU\LOCALS~1\Temp\pyl59.tmp\data\images\Ubuntu.ico -> C:\ubuntu\Ubuntu.ico 03-19 18:01 DEBUG TaskList: ## Finished copy_installation_files 03-19 18:01 DEBUG TaskList: ## Running get_iso... 03-19 18:01 DEBUG CommonBackend: Trying to use pre-specified ISO X:\ubuntu-11.10-desktop-i386.iso 03-19 18:01 DEBUG TaskList: New task is_valid_iso 03-19 18:01 DEBUG TaskList: ### Running is_valid_iso... 03-19 18:01 DEBUG Distro: checking Ubuntu ISO X:\ubuntu-11.10-desktop-i386.iso 03-19 18:01 INFO Distro: Found a valid iso for Ubuntu: X:\ubuntu-11.10-desktop-i386.iso 03-19 18:01 DEBUG TaskList: ### Finished is_valid_iso 03-19 18:01 DEBUG TaskList: New task check_iso 03-19 18:01 DEBUG TaskList: ### Running check_iso... 03-19 18:01 DEBUG CommonBackend: Checking X:\ubuntu-11.10-desktop-i386.iso 03-19 18:01 DEBUG Distro: checking Ubuntu ISO X:\ubuntu-11.10-desktop-i386.iso 03-19 18:01 INFO Distro: Found a valid iso for Ubuntu: X:\ubuntu-11.10-desktop-i386.iso 03-19 18:01 DEBUG CommonBackend: Using distro Ubuntu i386 instead of Ubuntu amd64 03-19 18:01 DEBUG TaskList: New task get_metalink 03-19 18:01 DEBUG TaskList: #### Running get_metalink... 03-19 18:01 DEBUG downloader: downloading http://releases.ubuntu.com/11.10/ubuntu-11.10-desktop-i386.metalink > C:\ubuntu\install 03-19 18:01 ERROR CommonBackend: Cannot download metalink file http://releases.ubuntu.com/11.10/ubuntu-11.10-desktop-i386.metalink err=[Errno 4] IOError: <urlopen error (7, 'getaddrinfo failed')> 03-19 18:01 DEBUG downloader: downloading http://cdimage.ubuntu.com/daily-live/current/oneiric-desktop-i386.metalink > C:\ubuntu\install 03-19 18:01 ERROR CommonBackend: Cannot download metalink file2 http://cdimage.ubuntu.com/daily-live/current/oneiric-desktop-i386.metalink err=[Errno 4] IOError: <urlopen error (7, 'getaddrinfo failed')> 03-19 18:01 DEBUG TaskList: #### Finished get_metalink 03-19 18:01 ERROR CommonBackend: ERROR: the metalink file is not available, cannot check the md5 for X:\ubuntu-11.10-desktop-i386.iso, ignoring 03-19 18:01 DEBUG TaskList: ### Finished check_iso 03-19 18:01 DEBUG TaskList: New task copy_file 03-19 18:01 DEBUG CommonBackend: Copying X:\ubuntu-11.10-desktop-i386.iso > C:\ubuntu\install\installation.iso 03-19 18:01 DEBUG TaskList: ### Running copy_file... 03-19 18:01 DEBUG TaskList: ### Finished copy_file 03-19 18:01 DEBUG TaskList: ## Finished get_iso 03-19 18:01 DEBUG TaskList: ## Running extract_kernel... 03-19 18:01 DEBUG CommonBackend: Extracting files from ISO C:\ubuntu\install\installation.iso 03-19 18:01 DEBUG WindowsBackend: extracting md5sum.txt from C:\ubuntu\install\installation.iso 03-19 18:01 DEBUG WindowsBackend: extracting casper\vmlinuz from C:\ubuntu\install\installation.iso 03-19 18:01 DEBUG WindowsBackend: extracting casper\initrd.lz from C:\ubuntu\install\installation.iso 03-19 18:01 DEBUG CommonBackend: Checking kernel, initrd and md5sums 03-19 18:01 DEBUG CommonBackend: checking C:\ubuntu\install\boot\vmlinuz 03-19 18:01 DEBUG CommonBackend: C:\ubuntu\install\boot\vmlinuz md5 = fde150f5c6fd2de66ed7876efbfcc4c7 == fde150f5c6fd2de66ed7876efbfcc4c7 03-19 18:01 DEBUG CommonBackend: checking C:\ubuntu\install\boot\initrd.lz 03-19 18:01 DEBUG CommonBackend: C:\ubuntu\install\boot\initrd.lz md5 = 8900200c764438c1b124dff5ae92c763 != d6baee1e11f1d6de6eba6bd43dbde352 03-19 18:01 ERROR TaskList: File C:\ubuntu\install\boot\initrd.lz is corrupted Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\backend.py", line 623, in extract_kernel Exception: File C:\ubuntu\install\boot\initrd.lz is corrupted 03-19 18:01 DEBUG TaskList: # Cancelling tasklist 03-19 18:01 ERROR root: File C:\ubuntu\install\boot\initrd.lz is corrupted Traceback (most recent call last): File "\lib\wubi\application.py", line 58, in run File "\lib\wubi\application.py", line 132, in select_task File "\lib\wubi\application.py", line 158, in run_installer File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\backend.py", line 623, in extract_kernel Exception: File C:\ubuntu\install\boot\initrd.lz is corrupted 03-19 18:01 DEBUG TaskList: # Finished tasklist

  Read the article

• Creating shapes on the fly

  - by Bertrand Le Roy

  Most Orchard shapes get created from part drivers, but they are a lot more versatile than that. They can actually be created from pretty much anywhere, including from templates. One example can be found in the Layout.cshtml file of the ThemeMachine theme: WorkContext.Layout.Footer .Add(New.BadgeOfHonor(), "5"); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } What this is really doing is create a new shape called BadgeOfHonor and injecting it into the Footer global zone (that has not yet been defined, which in itself is quite awesome) with an ordering rank of "5". We can actually come up with something simpler, if we want to render the shape inline instead of sending it into a zone: @Display(New.BadgeOfHonor()) Now let's try something a little more elaborate and create a new shape for displaying a date and time: @Display(New.DateTime(date: DateTime.Now, format: "d/M/yyyy")) For the moment, this throws a "Shape type DateTime not found" exception because the system has no clue how to render a shape called "DateTime" yet. The BadgeOfHonor shape above was rendering something because there is a template for it in the theme: Themes/ThethemeMachine/Views/BadgeOfHonor.cshtml. We need to provide a template for our new shape to get rendered. Let's add a DateTime.cshtml file into our theme's Views folder in order to make the exception go away: Hi, I'm a date time shape. Now we're just missing one thing. Instead of displaying some static text, which is not very interesting, we can display the actual time that got passed into the shape's dynamic constructor. Those parameters will get added to the template's Model, so they are easy to retrieve: @(((DateTime)Model.date).ToString(Model.format)) Now that may remind you a little of WebForm's user controls. That's a fair comparison, except that these shapes are much more flexible (you can add properties on the fly as necessary), and that the actual rendering is decoupled from the "control". For example, any theme can override the template for a shape, you can use alternates, wrappers, etc. Most importantly, there is no lifecycle and protocol abstraction like there was in WebForms. I think this is a real improvement over previous attempts at similar things.

  Read the article

• JMSContext, @JMSDestinationDefintion, DefaultJMSConnectionFactory with simplified JMS API: TOTD #213

  - by arungupta

  "What's New in JMS 2.0" Part 1 and Part 2 provide comprehensive introduction to new messaging features introduced in JMS 2.0. The biggest improvement in JMS 2.0 is introduction of the "new simplified API". This was explained in the Java EE 7 Launch Technical Keynote. You can watch a complete replay here. Sending and Receiving a JMS message using JMS 1.1 requires lot of boilerplate code, primarily because the API was designed 10+ years ago. Here is a code that shows how to send a message using JMS 1.1 API: @Statelesspublic class ClassicMessageSender { @Resource(lookup = "java:comp/DefaultJMSConnectionFactory") ConnectionFactory connectionFactory; @Resource(mappedName = "java:global/jms/myQueue") Queue demoQueue; public void sendMessage(String payload) { Connection connection = null; try { connection = connectionFactory.createConnection(); connection.start(); Session session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE); MessageProducer messageProducer = session.createProducer(demoQueue); TextMessage textMessage = session.createTextMessage(payload); messageProducer.send(textMessage); } catch (JMSException ex) { ex.printStackTrace(); } finally { if (connection != null) { try { connection.close(); } catch (JMSException ex) { ex.printStackTrace(); } } } }} There are several issues with this code: A JMS ConnectionFactory needs to be created in a application server-specific way before this application can run. Application-specific destination needs to be created in an application server-specific way before this application can run. Several intermediate objects need to be created to honor the JMS 1.1 API, e.g. ConnectionFactory -> Connection -> Session -> MessageProducer -> TextMessage. Everything is a checked exception and so try/catch block must be specified. Connection need to be explicitly started and closed, and that bloats even the finally block. The new JMS 2.0 simplified API code looks like: @Statelesspublic class SimplifiedMessageSender { @Inject JMSContext context; @Resource(mappedName="java:global/jms/myQueue") Queue myQueue; public void sendMessage(String message) { context.createProducer().send(myQueue, message); }} The code is significantly improved from the previous version in the following ways: The JMSContext interface combines in a single object the functionality of both the Connection and the Session in the earlier JMS APIs.  You can obtain a JMSContext object by simply injecting it with the @Inject annotation.  No need to explicitly specify a ConnectionFactory. A default ConnectionFactory under the JNDI name of java:comp/DefaultJMSConnectionFactory is used if no explicit ConnectionFactory is specified. The destination can be easily created using newly introduced @JMSDestinationDefinition as: @JMSDestinationDefinition(name = "java:global/jms/myQueue",        interfaceName = "javax.jms.Queue") It can be specified on any Java EE component and the destination is created during deployment. JMSContext, Session, Connection, JMSProducer and JMSConsumer objects are now AutoCloseable. This means that these resources are automatically closed when they go out of scope. This also obviates the need to explicitly start the connection JMSException is now a runtime exception. Method chaining on JMSProducers allows to use builder patterns. No need to create separate Message object, you can specify the message body as an argument to the send() method instead. Want to try this code ? Download source code! Download Java EE 7 SDK and install. Start GlassFish: bin/asadmin start-domain Build the WAR (in the unzipped source code directory): mvn package Deploy the WAR: bin/asadmin deploy <source-code>/jms/target/jms-1.0-SNAPSHOT.war And access the application at http://localhost:8080/jms-1.0-SNAPSHOT/index.jsp to send and receive a message using classic and simplified API. A replay of JMS 2.0 session from Java EE 7 Launch Webinar provides complete details on what's new in this specification: Enjoy!

  Read the article

• Inspiring a co-worker to adopt better coding practices?

  - by Aaronaught

  In the Handling my antiquated coworker question, various people discussed strategies for dealing with coworkers who are unwilling to integrate their workflow with the team's. I'd like, if possible, to learn some strategies for "teaching" a coworker who is merely ignorant of modern techniques and tools, and possibly a little apathetic. I've started working with a programmer who until recently has been working in relative isolation, in a different part of the company. He has extensive domain knowledge and most importantly he has demonstrated good problem-solving skills, something which many candidates seem to lack. However, the actual (C#) code I've seen is a throwback to the VB6 days. Procedural structure, Hungarian notation, global variables (abuse of static), no interfaces, no tests, non-use of Generics, throwing System.Exception... you get the idea. This programmer is a fair bit older than I am and, by first impressions at least, doesn't actively seek positive change. I'm not going to say resistant to change, because I think that is largely an issue of how the topic gets broached, and I want to be prepared. Programmers tend to be stubborn people, and going in with guns blazing and instituting rip-it-to-shreds code reviews and strictly-enforced policies is very likely not going to produce the end result that I want. If this were a new hire, a junior programmer, I wouldn't think twice about taking a "mentor" stance, but I'm extremely wary of treating an experienced employee as a clueless newbie (which he's not - he just hasn't kept pace with certain advancements in the field). How might I go about raising this developer's code quality standard the Dale Carnegie way, through gentle persuasion and non-material incentives? What would be the best strategy for effecting subtle, gradual changes, without creating an adversarial situation? Have other people - especially lead developers - been in this type of situation before? Which strategies were successful at stimulating interest and creating a positive group dynamic? Which strategies weren't successful and would be better to avoid? Clarifications: I really feel that several people are answering based on personal feelings without actually reading all of the details of the question. Please note the following, which should have been implied but I am now making explicit: This coworker is only my "senior" by virtue of age. I never said that his title, sphere of influence, or years at the organization exceed mine, and in fact, none of those things are true. He's a LOB programmer who's been absorbed into the main development shop. That's it. I am not a new hire, junior programmer, or other naïve idiot with grand plans to transform the company overnight. I am basically in charge of the software process, but as many who've worked as "leads" will know, responsibilities don't always correlate precisely with the org chart. I'm not asking people how to get my way, come hell or high water. I could do that if I wanted to, with the net result being that this person would become resentful and/or quit. Please try to understand that I am looking for a social, cooperative method of driving change. The mention of "...global variables... no tests... throwing System.Exception" was intended to demonstrate that the problems are not just superficial or aesthetic. Practices that may work for relatively small CRUD apps do not necessarily work for large enterprise apps, and in fact, none of the code so far has actually passed the integration tests. Please, try to take the question at face value, accept that I actually know what I'm talking about, and either answer the question that I actually asked or move on. P.S. My sincerest gratitude to those who -did- offer constructive advice rather than arguing with the premise. I'm going to leave this open for a while longer as I'm hoping to hear more in the way of real-world experiences.

  Read the article

• Automated Error Reporting = More Robust Software

  - by Laila

  I would like to tell you how to revolutionize your software development process </marketing hyperbole> On a more serious note, we (Red Gate's .NET Development team) recently rolled a new tool into our development process which has made our lives dramatically easier AND improved the quality of our software, and I (& one of our developers, Alex Davies) just wanted to take a quick moment to share the love. I work with a development team that takes pride in what they ship, so we take software testing rather seriously. For every development project we run, we allocate at least one software tester for every two developers, and we never ship software without first shipping early access releases and betas to get user feedback. And therein lies the challenge -encouraging users to provide consistent, useful feedback is a headache, but without that feedback, improving the software is. tricky. Until fairly recently, we used the standard (if long-winded) approach of receiving bug reports of variable quality via email or through our support forums. If that didn't give us enough information to reproduce the problem - which was most of the time - we had to enter into a time-consuming to-and-fro conversation with the end-user, to get scrape together the data we needed to work out where the problem lay. As I'm sure you're aware, this is painfully slow. To the delight of the team, we recently got to work with SmartAssembly, which lets us embed automated exception and error reporting into our software with very little pain, and we decided to do a little dogfooding. As a result, we've have made a really handy (if perhaps slightly obvious) discovery: As soon as we release a beta, or indeed any release of software, we now get tonnes of customer feedback through automated error reports. Making this process easier for our users has dramatically increased the amount (and quality) of feedback we get. From their point of view, they get an experience similar to Microsoft's error reporting, and process is essentially idiot-proof. From our side of things, we can now react much faster to the information we get, fixing the bugs and shipping a new-and-improved release, which our users rather appreciate. Smiles and hugs all round. Even more so because, as we're use SmartAssembly's Automated Error Reporting, we get to avoid having to spend weeks building an exception reporting mechanism. It takes just a few minutes to add reporting to a project, and we get a bunch of useful information back, like a stack trace and the values of all the local variables, which we can use to fix bugs. Happily, "Automated Error Reporting = More Robust Software" can actually be read two ways: we've found that we not only ship higher quality software, but we also release within a shorter time. We can ship stable software that our users are happy to upgrade to, and we then bask in the glory of lots of positive customer feedback. Once we'd starting working with SmartAssembly, we were curious to know how widespread error reporting was as a practice. Our product manager ran a survey in autumn last year, and found that 40% of software developers never really considered deploying error reporting. Considering how we've now got plenty of experience on the subject, one of our dev guys, Alex Davies, thought we should share what we've learnt, and he's kindly offered to host a webinar on delivering robust software with Automated Error Reporting. Drawing on our own in-house development experiences, he'll cover how to add error reporting to your program, how to actually use the error reports to fix bugs (don't snigger, not everyone's as bright as you), how to customize the error report dialog that your users see, and how to automatically get log files from your users' machine. The webinar will take place on Jan 25th (that's next week). It's free to attend, but you'll still need to register to hear Alex's dulcet tones.

  Read the article

• saving and retrieving a text file in java?

  - by user3319432

  import java.sql. ; import java.awt.; import javax.swing.; import java.awt.event.; public class saving extends JFrame implements ActionListener{ JTextField edpno=new JTextField(10); JLabel l0= new JLabel ("EDP Number: "); JComboBox fname = new JComboBox(); JLabel l1= new JLabel("First Name: "); JTextField lname= new JTextField(20); JLabel l2= new JLabel("Last Name: "); // JTextField contno= new JTextField(20); // JLabel l3= new JLabel("Contact Number: "); JComboBox contno = new JComboBox(); JLabel l3 = new JLabel ("Contact Number: "); JButton bOK = new JButton("Save"); JButton bRetrieve = new JButton("Retrieve"); private ImageIcon icon; JPanel C=new JPanel(){ protected void paintComponent(Graphics g){ g.drawImage(icon.getImage(),0,0,null); super.paintComponent(g); } }; public Search Record (){ icon=new ImageIcon("images/canres.png"); C.setOpaque(false); C.setLayout(new GridLayout(5,2,4,4)); setTitle("Search Record"); C.add (l0); C.add (edpno); edpno.addActionListener(this); C.add (l1); C.add (fname); fname.setForeground(Color.BLUE); fname.setFont(new Font(" ", Font.BOLD,15)); C.add (l2); C.add (lname); C.add (l3); C.add (contno); contno.setForeground(Color.BLUE); contno.setFont(new Font(" ", Font.BOLD,15)); C.add(bOK); bOK.addActionListener(this); C.add (bRetrieve); bRetrieve.addActionListener(this); bOK.setBackground(Color.white); bRetrieve.setBackground(Color.white); } public void saverecord(){ try{ //Connect to the Database Class.forName("sun.jdbc.odbc.JdbcOdbcDriver"); String path ="jdbc:odbc:;DRIVER=Microsoft Access Driver (*.mdb);DBQ=Database/roomassign.mdb"; String DBPassword =""; String DBUserName =""; Connection con = DriverManager.getConnection(path,"",""); Statement s = con.createStatement(); s.executeQuery("select firstname, Lastname, contact number from name WHERE edpno ='"+edpno.getText()+"'"); ResultSet rs = s.getResultSet(); ResultSetMetaData md = rs.getMetaData(); while(rs.next()) { fname.setSelectedItem(rs.getString(1)); lname.setText(rs.getString(2)); contno.setSelectedItem(rs.getString(3)); // crs.setSelectedItem(rs.getString(4)); } s.close(); con.close(); } catch(Exception Q) { JOptionPane.showMessageDialog(this,Q); } } public void SaveRecord(){ try{ Class.forName("sun.jdbc.odbc.JdbcOdbcDriver"); String path = "jdbc:odbc:;DRIVER=Microsoft Access Driver (*.mdb);DBQ=Database/roomassign.mdb"; String DBPassword =""; String DBUsername =""; Connection con = DriverManager.getConnection(path,"",""); Statement s = con.createStatement(); String sql = "UPDATE rooms SET Firstname='"+fname.getSelectedItem()+"',Lastname='"+lname.getText()+"',Contactnumber='"+contno.getSelectedItem()+"' WHERE '"+edpno.getText()+"'=edpno"; s.executeUpdate(sql); JOptionPane.showMessageDialog(this,"New room Record has been successfully saved"); dispose(); s.close(); con.close(); } catch(Exception Mismatch){ JOptionPane.showMessageDialog(this,Mismatch); } } public void actionPerformed (ActionEvent ako){ if (ako.getSource() == bRetrieve){ dispose(); } else if (ako.getSource() == bOK){ SaveRecord(); } } public static void main (String [] awtsave){ new Search(); } }

  Read the article

• Unable to Sign in to the Microsoft Online Services Signin application from Windows 7 client located behind ISA firewall

  - by Ravindra Pamidi

  A while ago i helped a customer troubleshoot authentication problem with Microsoft Online Services Signin application.  This customer was evaluating Microsoft BPOS (Business Productivity Online Services) and was having trouble using the single sign on application behind ISA 2004 firewall.The network structure is fairly simple with single Windows 2003 Active Directory domain and Windows 7 clients. On a successful logon to the Microsoft Online Services Signin application, this application provides single signon functionality to all of Microsoft online services in the BPOS package. Symptoms:When trying to signin it fails with error "The service is currently unavailable. Please try again later. If problems continue, contact your service administrator". If ISA 2004 firewall is removed from the picture the authentication succeeds.Troubleshooting: Enabled ISA Server firewall logging along with Microsoft Network Monitor tool on the Windows 7 Client while reproducing the issue. Analysis of the ISA Server Firewall logs and Microsoft Network capture revealed that the Microsoft Online Services Sign In application when sending request to ISA Server does not send the domain credentials and as a result ISA Server responds with an error code of HTTP 407 Proxy authentication required listing out the supported authentication mechanisms.  The application in question is expected to send the credentials of the domain user in response to this request. However in this case, it fails to send the logged on user's domain credentials. Bit of researching on the Internet revealed that The "Microsoft Online Services Sign In" application by default does not support Outbound Internet Proxy authentication. In order for it to send the logged on user's domain credentials we had to make  changes to its configuration file "SignIn.exe.config" located under "Program Files\Microsoft Online Services\Sign In" folder. Step by Step details to configure the configuration file are documented on Microsoft TechNet website given below.  Configure your outbound authenticating proxy serverhttp://www.microsoft.com/online/help/en-us/helphowto/cc54100d-d149-45a9-8e96-f248ecb1b596.htm After the above problem was addressed we were still not able to use the "Microsoft Online Services Sign In" application and it failed with the same error.  Analysis of another network capture revealed that the application in question is now sending the required credentials and the connection seems to terminate at a later stage. Enabled verbose logging for the "Microsoft Online Services Sign In" application and then reproduced the problem. Analysis of the logs revealed a time difference between the local client and Microsoft Online services server of around seven minutes which is above the acceptable time skew of five minutes. Excerpt from Microsoft Online Services Sign In application verbose log:  1/26/2012 1:57:51 PM Verbose SingleSignOn.GetSSOGenericInterface SSO Interface URL: https://signinservice.apac.microsoftonline.com/ssoservice/UID1/26/2012 1:57:52 PM Exception SSOSignIn.SignIn The security timestamp is invalid because its creation time ('2012-01-26T08:34:52.767Z') is in the future. Current time is '2012-01-26T08:27:52.987Z' and allowed clock skew is '00:05:00'.1/26/2012 1:57:52 PM Exception SSOSignIn.SignIn  Although the Windows 7 Clients successfully synchronized time to the domain controller for the domain, the domain controller was not configured to synchronize time with external NTP servers. This caused a gradual drift in time on the network thus resulting in the above issue. Reconfigured the domain controller holding the PDC FSMO role to synchronize time with external time source ( time.nist.gov ) and edited the system policy on the ISA server firewall to allow NTP traffic to time.nist.gov Configure the time source for the forest:Windows Time Servicehttp://technet.microsoft.com/en-us/library/cc794937(WS.10).aspx Forced synchronization of Windows time using the command w32tm /resync on the domain controller and later on the clients each of which had corrected the seven minutes difference. This resolved the problem with logon to Microsoft Online Services Sign In.

  Read the article

• Animation Trouble with Java Swing Timer - Also, JFrame Will Not Exit_On_Close

  - by forgotton_semicolon

  So, I am using a Java Swing Timer because putting the animation code in a run() method of a Thread subclass caused an insane amount of flickering that is really a terrible experience for any video game player. Can anyone give me any tips on: Why there is no animation... Why the JFrame will not close when it is coded to Exit_On_Close 2 times My code is here: import java.awt.; import java.awt.event.; import javax.swing.*; import java.net.URL; //////////////////////////////////////////////////////////////// TFQ public class TFQ extends JFrame { DrawingsInSpace dis; //========================================================== constructor public TFQ() { dis = new DrawingsInSpace(); JPanel content = new JPanel(); content.setLayout(new FlowLayout()); this.setContentPane(dis); this.setDefaultCloseOperation(EXIT_ON_CLOSE); this.setTitle("Plasma_Orbs_Off_Orion"); this.setSize(500,500); this.pack(); //... Create timer which calls action listener every second.. // Use full package qualification for javax.swing.Timer // to avoid potential conflicts with java.util.Timer. javax.swing.Timer t = new javax.swing.Timer(500, new TimePhaseListener()); t.start(); } /////////////////////////////////////////////// inner class Listener thing class TimePhaseListener implements ActionListener, KeyListener { // counter int total; // loop control boolean Its_a_go = true; //position of our matrix int tf = -400; //sprite directions int Sprite_Direction; final int RIGHT = 1; final int LEFT = 2; //for obstacle Rectangle mega_obstacle = new Rectangle(200, 0, 20, HEIGHT); public void actionPerformed(ActionEvent e) { //... Whenever this is called, repaint the screen dis.repaint(); addKeyListener(this); while (Its_a_go) { try { dis.repaint(); if(Sprite_Direction == RIGHT) { dis.matrix.x += 2; } // end if i think if(Sprite_Direction == LEFT) { dis.matrix.x -= 2; } } catch(Exception ex) { System.out.println(ex); } } // end while i think } // end actionPerformed @Override public void keyPressed(KeyEvent arg0) { // TODO Auto-generated method stub } @Override public void keyReleased(KeyEvent arg0) { // TODO Auto-generated method stub } @Override public void keyTyped(KeyEvent event) { // TODO Auto-generated method stub if (event.getKeyChar()=='f'){ Sprite_Direction = RIGHT; System.out.println("matrix should be animating now "); System.out.println("current matrix position = " + dis.matrix.x); } if (event.getKeyChar()=='d') { Sprite_Direction = LEFT; System.out.println("matrix should be going in reverse"); System.out.println("current matrix position = " + dis.matrix.x); } } } //================================================================= main public static void main(String[] args) { JFrame SafetyPins = new TFQ(); SafetyPins.setVisible(true); SafetyPins.setSize(500,500); SafetyPins.setResizable(true); SafetyPins.setLocationRelativeTo(null); SafetyPins.setDefaultCloseOperation(EXIT_ON_CLOSE); } } class DrawingsInSpace extends JPanel { URL url1_plasma_orbs; URL url2_matrix; Image img1_plasma_orbs; Image img2_matrix; // for the plasma_orbs Rectangle bbb = new Rectangle(0,0, 0, 0); // for the matrix Rectangle matrix = new Rectangle(-400, 60, 430, 200); public DrawingsInSpace() { //load URLs try { url1_plasma_orbs = this.getClass().getResource("plasma_orbs.png"); url2_matrix = this.getClass().getResource("matrix.png"); } catch(Exception e) { System.out.println(e); } // attach the URLs to the images img1_plasma_orbs = Toolkit.getDefaultToolkit().getImage(url1_plasma_orbs); img2_matrix = Toolkit.getDefaultToolkit().getImage(url2_matrix); } public void paintComponent(Graphics g) { super.paintComponent(g); // draw the plasma_orbs g.drawImage(img1_plasma_orbs, bbb.x, bbb.y,this); //draw the matrix g.drawImage(img2_matrix, matrix.x, matrix.y, this); } } // end class enter code here

  Read the article

• Removing occurrences of characters in a string

  - by DmainEvent

  I am reading this book, programming Interviews exposed by John Wiley and sons and in chapter 6 they are discussing removing all instances of characters in a src string using a removal string... so removeChars(string str, string remove) In there writeup they sey the steps to accomplish this are to have a boolean lookup array with all values initially set to false, then loop through each character in remove setting the corresponding value in the lookup array to true (note: this could also be a hash if the possible character set where huge like Unicode-16 or something like that or if str and remove are both relatively small... < 100 characters I suppose). You then iterate through the str with a source and destination index, copying each character only if its corresponding value in the lookup array is false... Which makes sense... I don't understand the code that they use however... They have for(src = 0; src < len; ++src){ flags[r[src]] == true; } which is turning the flag value at the remove string indexed at src to true... so if you start out with PLEASE HELP as your str and LEA as your remove you will be setting in your flag table at 0,1,2... t|t|t but after that you will get an out of bounds exception because r doesn't have have anything greater than 2 in it... even using there example you get an out of bounds exception... Am is there code example unworkable? Entire function string removeChars( string str, string remove ){ char[] s = str.toCharArray(); char[] r = remove.toCharArray(); bool[] flags = new bool[128]; // assumes ASCII! int len = s.Length; int src, dst; // Set flags for characters to be removed for( src = 0; src < len; ++src ){ flags[r[src]] = true; } src = 0; dst = 0; // Now loop through all the characters, // copying only if they aren’t flagged while( src < len ){ if( !flags[ (int)s[src] ] ){ s[dst++] = s[src]; } ++src; } return new string( s, 0, dst ); } as you can see, r comes from the remove string. So in my example the remove string has only a size of 3 while my str string has a size of 11. len is equal to the length of the str string. So it would be 11. How can I loop through the r string since it is only size 3? I haven't compiled the code so I can loop through it, but just looking at it I know it won't work. I am thinking they wanted to loop through the r string... in other words they got the length of the wrong string here.

  Read the article

• Gnome-shell fails to load on 12.10

  - by Githlar

  I'm usually the one answering questions, but in this I'm throughly stumped! My Setup: Ubuntu 12.10 (Dist upgrade form 12.04) ATI M96 [Mobility Radeon HD 4650] Upon the first installation of 12.10 I had all kinds of issues getting the Legacy ATI drivers to install (I guess the source for the drivers isn't kosher with kernel 3.5). So, I added the repository ppa:makson96/fglrx - which has a version of the ATI source patched to work with kernel 3.5. After installation of fglrx-legacy from that PPA, gnome-shell and all my graphics work fine... until today. The Problem I unsuspended my computer today and the screen was black (not off, the black from the gnome lock screen). I'd move my mouse/hit a key and the background would flash and then it'd go back to black. Restarted via VT1 Logged into Gnome (gnome-shell) session, but no gnome-shell! Investigation: First, I went to VT1 and tried export DISPLAY=:0;gnome-shell --replace. It appeared to work fine, switch back to X and nothing. Went back to VT1 and saw this error message: JS ERROR: !!! Exception was: TypeError: Object 0x7fc748129c30 is not a subclass of (null), it's a xO JS ERROR: !!! message = '"Object 0x7fc748129c30 is not a subclass of (null), it's a xO"' JS ERROR: !!! fileName = '"/usr/share/gnome-shell/js/ui/tweener.js"' JS ERROR: !!! lineNumber = '218' JS ERROR: !!! stack = '"()@/usr/share/gnome-shell/js/ui/tweener.js:218 wrapper()@/usr/share/gjs-1.0/lang.js:204 ()@/usr/share/gjs-1.0/lang.js:145 ()@/usr/share/gjs-1.0/lang.js:239 init()@/usr/share/gnome-shell/js/ui/tweener.js:49 init()@/usr/share/gnome-shell/js/ui/environment.js:96 @<main>:1 "' Window manager warning: Log level 32: Execution of main.js threw exception: TypeError: Object 0x7fc748129c30 is not a subclass of (null), it's a xO Note: Everywhere it says "it's a xO", xO is actually garbled and changes every time (I'm thinking memory corruption?) This error is thrown by line 96 of /usr/share/gnome-shell/js/ui/environment.js: tweener.Init() Did a purge of fglrx-legacy, reboot, reinstall fglrx-legacy, reboot... same thing. Did a ppa-purge of ppa:gnome3-team/gnome3, and reinstalled gnome-shell and ubuntu-desktop from the standard repositores... same thing. I'm really at a loss here. I love gnome-shell and after using it for nearly a year now gnome classic just seems so archaic. Additional Information Apt log from the day I first suspended my machine (these are upgrades from the gnome3-team/gnome3 ppa and ubuntu-wine/ppa ppa): Start-Date: 2012-11-24 17:30:28 Commandline: aptdaemon role='role-commit-packages' sender=':1.618' Install: gkbd-capplet:amd64 (3.6.0-0ubuntu1), gnome-control-center-unity:amd64 (1.0-0ubuntu1~ubuntu12.10.1) Upgrade: nautilus:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1), libgnome-control-center1:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), wine1.5-i386:i386 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), wine1.5:amd64 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), gnome-settings-daemon:amd64 (3.4.2-0ubuntu14, 3.6.3-0ubuntu1~ubuntu12.10.1), gnome-control-center-data:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), gnome-accessibility-themes:amd64 (3.6.0.2-0ubuntu1, 3.6.2-0ubuntu2~ubuntu12.10.1), gnome-themes-standard:amd64 (3.6.0.2-0ubuntu1, 3.6.2-0ubuntu2~ubuntu12.10.1), wine1.5-amd64:amd64 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), nautilus-data:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1), gnome-control-center:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), libnautilus-extension1a:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1) End-Date: 2012-11-24 17:31:32 fglrxinfo (driver appears to be working): display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Mobility Radeon HD 4650 OpenGL version string: 3.3.11653 Compatibility Profile Context Does anybody have any further ideas?

  Read the article

• android client not working [migrated]

  - by Syeda Zunairah

  i have a java client and c# server the server code is static Socket listeningSocket; static Socket socket; static Thread thrReadRequest; static int iPort = 4444; static int iConnectionQueue = 100; static void Main(string[] args) { Console.WriteLine(IPAddress.Parse(getLocalIPAddress()).ToString()); try { listeningSocket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp); //listeningSocket.Bind(new IPEndPoint(0, iPort)); listeningSocket.Bind(new IPEndPoint(IPAddress.Parse(getLocalIPAddress()), iPort)); listeningSocket.Listen(iConnectionQueue); thrReadRequest = new Thread(new ThreadStart(getRequest)); thrReadRequest.Start(); } catch (Exception e) { Console.WriteLine("Winsock error: " + e.ToString()); //throw; } } static private void getRequest() { int i = 0; while (true) { i++; Console.WriteLine("Outside Try i = {0}", i.ToString()); try { socket = listeningSocket.Accept(); // Receiving //byte[] rcvLenBytes = new byte[4]; //socket.Receive(rcvLenBytes); //int rcvLen = System.BitConverter.ToInt32(rcvLenBytes, 0); //byte[] rcvBytes = new byte[rcvLen]; //socket.Receive(rcvBytes); //String formattedBuffer = System.Text.Encoding.ASCII.GetString(rcvBytes); byte[] buffer = new byte[socket.SendBufferSize]; int iBufferLength = socket.Receive(buffer, 0, buffer.Length, 0); Console.WriteLine("Received {0}", iBufferLength); Array.Resize(ref buffer, iBufferLength); string formattedBuffer = Encoding.ASCII.GetString(buffer); Console.WriteLine("Data received by Client: {0}", formattedBuffer); if (formattedBuffer == "quit") { socket.Close(); listeningSocket.Close(); Environment.Exit(0); } Console.WriteLine("Inside Try i = {0}", i.ToString()); Thread.Sleep(500); } catch (Exception e) { //socket.Close(); Console.WriteLine("Receiving error: " + e.ToString()); Console.ReadKey(); //throw; } finally { socket.Close(); //listeningsocket.close(); } } } static private string getLocalIPAddress() { IPHostEntry host; string localIP = ""; host = Dns.GetHostEntry(Dns.GetHostName()); foreach (IPAddress ip in host.AddressList) { if (ip.AddressFamily == AddressFamily.InterNetwork) { localIP = ip.ToString(); break; } } return localIP; } } and the jave android code is private TCPClient mTcpClient; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); final EditText editText = (EditText) findViewById(R.id.edit_message); Button send = (Button)findViewById(R.id.sendbutton); // connect to the server new connectTask().execute(""); send.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View view) { String message = editText.getText().toString(); //sends the message to the server if (mTcpClient != null) { mTcpClient.sendMessage(message); } editText.setText(""); } }); } @Override public boolean onCreateOptionsMenu(Menu menu) { getMenuInflater().inflate(R.menu.main, menu); return true; } public class connectTask extends AsyncTask<String,String,TCPClient> { @Override protected TCPClient doInBackground(String... message) { mTcpClient = new TCPClient(new TCPClient.OnMessageReceived() { @Override public void messageReceived(String message) { publishProgress(message); } }); mTcpClient.run(); return null; } @Override protected void onProgressUpdate(String... values) { super.onProgressUpdate(values); } } } when i run the server it gives output of try i=1. can any one tell me what to do next

  Read the article

• Writing a method to 'transform' an immutable object: how should I approach this?

  - by Prog

  (While this question has to do with a concrete coding dilemma, it's mostly about what's the best way to design a function.) I'm writing a method that should take two Color objects, and gradually transform the first Color into the second one, creating an animation. The method will be in a utility class. My problem is that Color is an immutable object. That means that I can't do color.setRGB or color.setBlue inside a loop in the method. What I can do, is instantiate a new Color and return it from the method. But then I won't be able to gradually change the color. So I thought of three possible solutions: 1- The client code includes the method call inside a loop. For example: int duration = 1500; // duration of the animation in milliseconds int steps = 20; // how many 'cycles' the animation will take for(int i=0; i<steps; i++) color = transformColor(color, targetColor, duration, steps); And the method would look like this: Color transformColor(Color original, Color target, int duration, int steps){ int redDiff = target.getRed() - original.getRed(); int redAddition = redDiff / steps; int newRed = original.getRed() + redAddition; // same for green and blue .. Thread.sleep(duration / STEPS); // exception handling omitted return new Color(newRed, newGreen, newBlue); } The disadvantage of this approach is that the client code has to "do part of the method's job" and include a for loop. The method doesn't do it's work entirely on it's own, which I don't like. 2- Make a mutable Color subclass with methods such as setRed, and pass objects of this class into transformColor. Then it could look something like this: void transformColor(MutableColor original, Color target, int duration){ final int STEPS = 20; int redDiff = target.getRed() - original.getRed(); int redAddition = redDiff / steps; int newRed = original.getRed() + redAddition; // same for green and blue .. for(int i=0; i<STEPS; i++){ original.setRed(original.getRed() + redAddition); // same for green and blue .. Thread.sleep(duration / STEPS); // exception handling omitted } } Then the calling code would usually look something like this: // The method will usually transform colors of JComponents JComponent someComponent = ... ; // setting the Color in JComponent to be a MutableColor Color mutableColor = new MutableColor(someComponent.getForeground()); someComponent.setForeground(mutableColor); // later, transforming the Color in the JComponent transformColor((MutableColor)someComponent.getForeground(), new Color(200,100,150), 2000); The disadvantage is - the need to create a new class MutableColor, and also the need to do casting. 3- Pass into the method the actual mutable object that holds the color. Then the method could do object.setColor or similar every iteration of the loop. Two disadvantages: A- Not so elegant. Passing in the object that holds the color just to transform the color feels unnatural. B- While most of the time this method will be used to transform colors inside JComponent objects, other kinds of objects may have colors too. So the method would need to be overloaded to receive other types, or receive Objects and have instanceof checks inside.. Not optimal. Right now I think I like solution #2 the most, than solution #1 and solution #3 the least. However I'd like to hear your opinions and suggestions regarding this.

  Read the article

• Android 1.6: "android.view.WindowManager$BadTokenException: Unable to add window -- token null is no

  - by Dan Monego

  I'm trying to open a dialog window, but every time I try to open it it throws this exception: E/AndroidRuntime( 206): Uncaught handler: thread main exiting due to uncaught exception E/AndroidRuntime( 206): android.view.WindowManager$BadTokenException: Unable to add window -- token null is not for an application E/AndroidRuntime( 206): at android.view.ViewRoot.setView(ViewRoot.java:460) E/AndroidRuntime( 206): at android.view.WindowManagerImpl.addView(WindowManagerImpl.java:177) E/AndroidRuntime( 206): at android.view.WindowManagerImpl.addView(WindowManagerImpl.java:91) E/AndroidRuntime( 206): at android.app.Dialog.show(Dialog.java:238) E/AndroidRuntime( 206): at android.app.Activity.showDialog(Activity.java:2413) I'm creating it by calling showDialog with the display's id. The onCreateDialog handler logs fine and I can step through it without an issue, but I've attached since it seems like I'm missing something in it: @Override public Dialog onCreateDialog(int id) { Dialog dialog; Context appContext = this.getApplicationContext(); switch(id) { case RENAME_DIALOG_ID: Log.i("Edit", "Creating rename dialog..."); dialog = new Dialog(appContext); dialog.setContentView(R.layout.rename); dialog.setTitle("Rename " + noteName); break; default: dialog = null; break; } return dialog; } Is there something missing from this? Some questions have talked about having this problem when creating a dialog from onCreate, which happen because the activity isn't created yet, but this is coming from a call from a menu object, and the appContext variable seems like it is correctly populated in the debugger.

  Read the article

• Serializing object with no namespaces using DataContractSerializer

  - by Yurik

  How do I remove XML namespaces from an object's XML representation serialized using DataContractSerializer? That object needs to be serialized to a very simple output XML. Latest & greatest - using .Net 4 beta 2 The object will never need to be deserialized. XML should not have any xmlns:... namespace refs Any subtypes of Exception and ISubObject need to be supported. It will be very difficult to change the original object. Object: [Serializable] class MyObj { string str; Exception ex; ISubObject subobj; } Need to serialize into: <xml> <str>...</str> <ex i:nil="true" /> <subobj i:type="Abc"> <AbcProp1>...</AbcProp1> <AbcProp2>...</AbcProp2> </subobj> </xml> I used this code: private static string ObjectToXmlString(object obj) { if (obj == null) throw new ArgumentNullException("obj"); var serializer = new DataContractSerializer( obj.GetType(), null, Int32.MaxValue, false, false, null, new AllowAllContractResolver()); var sb = new StringBuilder(); using (var xw = XmlWriter.Create(sb, new XmlWriterSettings { OmitXmlDeclaration = true, NamespaceHandling = NamespaceHandling.OmitDuplicates, Indent = true })) { serializer.WriteObject(xw, obj); xw.Flush(); return sb.ToString(); } } From this article I adopted a DataContractResolver so that no subtypes have to be declared: public class AllowAllContractResolver : DataContractResolver { public override bool TryResolveType(Type dataContractType, Type declaredType, DataContractResolver knownTypeResolver, out XmlDictionaryString typeName, out XmlDictionaryString typeNamespace) { if (!knownTypeResolver.TryResolveType(dataContractType, declaredType, null, out typeName, out typeNamespace)) { var dictionary = new XmlDictionary(); typeName = dictionary.Add(dataContractType.FullName); typeNamespace = dictionary.Add(dataContractType.Assembly.FullName); } return true; } public override Type ResolveName(string typeName, string typeNamespace, Type declaredType, DataContractResolver knownTypeResolver) { return knownTypeResolver.ResolveName(typeName, typeNamespace, declaredType, null) ?? Type.GetType(typeName + ", " + typeNamespace); } }

  Read the article

• Reporting services 2008: ReportExecution2005.asmx does not exist

  - by Shimrod

  Hi everyone, I'm trying to generate a report directly from the code (to send it by mail after). I make this in a windows service. So here is what I'm doing: Dim rview As New ReportViewer() Dim reportServerAddress As String = "http://server/Reports_client" rview.ServerReport.ReportServerUrl = New Uri(reportServerAddress) Dim paramList As New List(Of Microsoft.Reporting.WinForms.ReportParameter) paramList.Add(New Microsoft.Reporting.WinForms.ReportParameter("param1", t.Value)) paramList.Add(New Microsoft.Reporting.WinForms.ReportParameter("CurrentDate", Date.Now)) Dim reportsDirectory As String = "AppName.Reports" Dim reportPath As String = String.Format("/{0}/{1}", reportsDirectory, reportName) rview.ServerReport.ReportPath = reportPath rview.ServerReport.SetParameters(paramList) 'This is where I get the exception Dim mimeType, encoding, extension, deviceInfo As String Dim streamids As String() Dim warnings As Microsoft.Reporting.WinForms.Warning() deviceInfo = "<DeviceInfo><SimplePageHeaders>True</SimplePageHeaders></DeviceInfo>" Dim format As String = "PDF" Dim bytes As Byte() = rview.ServerReport.Render(format, deviceInfo, mimeType, encoding, extension, streamids, warnings) When debugging this code, I can see it throws a MissingEndpointException where I make the SetParameters(paramList) with this message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. Looking in the server's log file, I can see this: ui!ReportManager_0-8!878!06/02/2010-11:34:36:: Unhandled exception: System.Web.HttpException: The file '/Reports_client/ReportExecution2005.asmx' does not exist. at System.Web.UI.Util.CheckVirtualFileExists(VirtualPath virtualPath) at System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) at System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) at System.Web.Compilation.BuildManager.GetVPathBuildResult(HttpContext context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) at System.Web.Compilation.BuildManager.GetVPathBuildResult(HttpContext context, VirtualPath virtualPath) at System.Web.UI.WebServiceParser.GetCompiledType(String inputFile, HttpContext context) at System.Web.Services.Protocols.WebServiceHandlerFactory.GetHandler(HttpContext context, String verb, String url, String filePath) at System.Web.HttpApplication.MapHttpHandler(HttpContext context, String requestType, VirtualPath path, String pathTranslated, Boolean useAppConfig) at System.Web.HttpApplication.MapHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) I didn't find any resource on the web that fits my problem. Does anyone have a clue ? I'm able to view the reports from a web application, so I'm sure the server is running. Thanks in advance.

  Read the article

• Installing VSTO 4.0 Causes VSTO 3.0 Addin to quit working

  - by Jacob Adams

  I just installed Visual Studio 2010 yesterday. As part of that I installed VSTO 4.0. Now when I run any Office application, my VSTO 3.0 addins fail to load. The error in the event log is Customization URI: file:///H:/PathToMyAddin/MyAddin.vsto Exception: Customization does not have the permissions required to create an application domain. ***** Exception Text ******* Microsoft.VisualStudio.Tools.Applications.Runtime.CannotCreateCustomizationDomainException: Customization does not have the permissions required to create an application domain. --- System.Security.SecurityException: Customized functionality in this application will not work because the administrator has listed file:///H:/PathToMyAddin/MyAddin.vsto as untrusted. Contact your administrator for further assistance. at Microsoft.VisualStudio.Tools.Office.Runtime.RuntimeUtilities.VerifySolutionUri(Uri uri) at Microsoft.VisualStudio.Tools.Office.Runtime.DomainCreator.CreateCustomizationDomainInternal(String solutionLocation, String manifestName, String documentName, Boolean showUIDuringDeployment, IntPtr hostServiceProvider, IntPtr& executor) The Zone of the assembly that failed was: MyComputer It seems like like maybe this is due to it trying to load different version of .NET is the same process/AppDomain. However the error would indicate it's some sort of permissions issue.

  Read the article

• SSH / SFTP connection issue using Tamir.SharpSsh

  - by jinsungy

  This is my code to connect and send a file to a remote SFTP server. public static void SendDocument(string fileName, string host, string remoteFile, string user, string password) { Scp scp = new Scp(); scp.OnConnecting += new FileTansferEvent(scp_OnConnecting); scp.OnStart += new FileTansferEvent(scp_OnProgress); scp.OnEnd += new FileTansferEvent(scp_OnEnd); scp.OnProgress += new FileTansferEvent(scp_OnProgress); try { scp.To(fileName, host, remoteFile, user, password); } catch (Exception e) { throw e; } } I can successfully connect, send and receive files using CoreFTP. Thus, the issue is not with the server. When I run the above code, the process seems to stop at the scp.To method. It just hangs indefinitely. Anyone know what might my problem be? Maybe it has something to do with adding the key to the a SSH Cache? If so, how would I go about this? EDIT: I inspected the packets using wireshark and discovered that my computer is not executing the Diffie-Hellman Key Exchange Init. This must be the issue. EDIT: I ended up using the following code. Note, the StrictHostKeyChecking was turned off to make things easier. JSch jsch = new JSch(); jsch.setKnownHosts(host); Session session = jsch.getSession(user, host, 22); session.setPassword(password); System.Collections.Hashtable hashConfig = new System.Collections.Hashtable(); hashConfig.Add("StrictHostKeyChecking", "no"); session.setConfig(hashConfig); try { session.connect(); Channel channel = session.openChannel("sftp"); channel.connect(); ChannelSftp c = (ChannelSftp)channel; c.put(fileName, remoteFile); c.exit(); } catch (Exception e) { throw e; } Thanks.

  Read the article

• C# Socket.BeginSend AsyncCallback behavior (timeout?)

  - by mdarsigny

  Hi guys, Here is a scenario with asynchronous sockets that I dont't quite understand... I have 2 Tcp sockets, a client socket & a server socket. My server socket is bound & listening on a port. My client sockets connect to the server socket (using BeginConnect / EndConnect). I then send a message to the server using BeginSend(). On the server side, I don't do a Receive() or BeginReceive(). What happens is that my AsyncCallback specified for my BeginSend call gets invoked & its IAsyncResult tells me that it completed & the call to Socket.EndSend() does not raise any exception... Is there something that I don't get or shouldn't my AsyncCallback be called only if the BeginSend call actually sends something to the server (ie.: callback called after the server has received all bytes)? If there was no receive done on the server, shouldn't my callback be called after the sendtimeout expires and my call to Socket.EndSend then would raise an exception? Thanks

  Read the article

< Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >