Search Results

Search found 16022 results on 641 pages for 'model export'.

Page 179/641 | < Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >

• Oh snap! My RPi was upgraded to 512MB! Woo-hoo!

  - by hinkmond

  I ordered a Raspberry Pi Model B (256MB) over 4 months ago on backorder. When it finally came I saw it was upgraded to the new half a gig model! Woot! But, all was not perfect. Gary C. told me the shipped configuration of the new RPi models didn't have the right firmware for 512MB, and I had to upgrade the start.elf in the /boot directory to recognize all of the 512MB RAM. I did a "free" command, and sure enough saw only 240MB. Sadness. But, Gary gave me a copy of his start.elf which worked after some trail and error. For anyone ordering the new RPi Model B w/512MB, here are the steps to get you going with full 512MB RAM: sudo apt-get update --fix-missing sudo apt-get upgrade --fix-missing # NOTE: This step takes at least a couple hours on a # fast network wget https://raw.github.com/raspberrypi/firmware/\ 164b0fe2b3b56081c7510df93bc1440aebe45f7e/boot/\ arm496_start.elf sudo mv /boot/start.elf /boot/orig-start.elf sudo mv arm496_start.elf /boot/start.elf sudo reboot free total used free shared buffers cached Mem: 497768 210596 287172 0 16892 169624 -/+ buffers/cache: 24080 473688 Swap: 102396 0 102396 So of course this means... (drumroll) there is now 498MB available for the Java Embedded heap! java -Xmx400m -version java version "1.7.0_06" Java(TM) SE Embedded Runtime Environment (build 1.7.0_06-b24, headless) Java HotSpot(TM) Embedded Client VM (build 23.2-b09, mixed mode) Yeah, baby! Hinkmond

  Read the article

• Is there a canonical source supporting "all-surrogates"?

  - by user61852

  Background The "all-PK-must-be-surrogates" approach is not present in Codd's Relational Model or any SQL Standard (ANSI, ISO or other). Canonical books seems to elude this restrictions too. Oracle's own data dictionary scheme uses natural keys in some tables and surrogate keys in other tables. I mention this because these people must know a thing or two about RDBMS design. PPDM (Professional Petroleum Data Management Association) recommend the same canonical books do: Use surrogate keys as primary keys when: There are no natural or business keys Natural or business keys are bad ( change often ) The value of natural or business key is not known at the time of inserting record Multicolumn natural keys ( usually several FK ) exceed three columns, which makes joins too verbose. Also I have not found canonical source that says natural keys need to be immutable. All I find is that they need to be very estable, i.e need to be changed only in very rare ocassions, if ever. I mention PPDM because these people must know a thing or two about RDBMS design too. The origins of the "all-surrogates" approach seems to come from recommendations from some ORM frameworks. It's true that the approach allows for rapid database modeling by not having to do much business analysis, but at the expense of maintainability and readability of the SQL code. Much prevision is made for something that may or may not happen in the future ( the natural PK changed so we will have to use the RDBMS cascade update funtionality ) at the expense of day-to-day task like having to join more tables in every query and having to write code for importing data between databases, an otherwise very strightfoward procedure (due to the need to avoid PK colisions and having to create stage/equivalence tables beforehand ). Other argument is that indexes based on integers are faster, but that has to be supported with benchmarks. Obviously, long, varying varchars are not good for PK. But indexes based on short, fix-length varchar are almost as fast as integers. The questions - Is there any canonical source that supports the "all-PK-must-be-surrogates" approach ? - Has Codd's relational model been superceded by a newer relational model ?

  Read the article

• Who can change the View in MVC?

  - by Luke

  I'm working on a thick client graph displaying and manipulation application. I'm trying to apply the MVC pattern to our 3D visualization component. Here is what I have for the Model, View, and Controller: Model - The graph and it's metadata. This includes vertices, edges, and the attributes of each. It does not contain position information, icons, colors, or anything display related. View - This would commonly be called a scene graph. It includes the 3D display information, texture information, color information, and anything else that is related specifically to the visualization of the model. Controller - The controller takes the view and displays it in a Window using OpenGL (but it could potentially be any 3D graphics package). The application has various "layouts" that change the position of the vertices in the display. For instance, one layout may arrange the vertices in a circle. Is it common for these layouts to access and change the view directly? Should they go through the Controller to access the View? If they go through the Controller, should they just ask for direct access to the View or should each change go through the controller? I realize this is a bit different from the standard MVC example where there a finite number of Views. In this case, the View can change in an infinite number of ways. Perhaps I'm shattering some basic principle of MVC here. Thanks in advance!

  Read the article

• Enforcing Constraints Upon Data Documents of Various Formats

  - by Christopher Berman

  This seems like the sort of problem that must have been solved elegantly long ago, but I haven't the foggiest how to google it and find it. Suppose you're maintaining a large legacy system, which has a large collection of data (tens of GB) of various formats, including XML and two different internal configuration formats. Suppose further that there are abstract rules governing the values these files may or may not contain. EXAMPLE: File A defines the raw, mathematical data pertaining to the aerodynamics of a car for consumption of the physics component of the system. File B contains certain values from File A in an easily accessible, XML hierarchy for consumption of a different component of the system. There exists, therefore, an abstract rule (or constraint) such that the values from File B must match the values from File A. This is probably the simplest constraint that can be specified, but in practice, the constraints between files can become very complicated indeed. What is the best method for managing these constraints between files of arbitrary formats, short of migrating it over to an RDBMS (which simply isn't feasible for the foreseeable future)? Has this problem been solved already? To be more specific, I would expect the solution to at least produce notifications of violated constraints; the solution need not resolve the constraints. ============================== Sample file structures File A (JeepWrangler2011.emv): MODEL JeepWrangler2011 { EsotericMathValueX 11.1 EsotericMathValueY 22.2 EsotericMathValueZ 33.3 } File B (JeepWrangler2011.xml): <model name="JeepWrangler2011"> <!--These values must correspond File A's EsotericMathValues--> <modelExtent x="11.1" y="22.2" z="33.3"/> [...] </model>

  Read the article

• Particle trajectory smoothing: where to do the simulation?

  - by nkint

  I have a particle system in which I have particles that are moving to a target and the new targets are received via network. The list of new target are some noisy coordinates of a moving target stored in the server that I want to smooth in the client. For doing the smoothing and the particle I wrote a simple particle engine with standard euler integration model. So, my pseudo code is something like that: # pseudo code class Particle: def update(): # do euler motion model integration: # if the distance to the target is more than a limit # add a new force to the accelleration # seeking the target, # and add the accelleration to velocity # and velocity to the position positionHistory.push_back(position); if history.length > historySize : history.pop_front() class ParticleEngine: particleById = dict() # an associative array # where the keys are the id # and particle istances are sotred as values # this method is called each time a new tcp packet is received and parsed def setNetTarget(int id, Vec2D new_target): particleById[id].setNewTarget(new_target) # this method is called each new frame def draw(): for p in particleById.values: p.update() beginVertex(LINE_STRIP) for v in p.positionHistory: vertex(v.x, v.y) endVertex() The new target that are arriving are noisy but setting some accelleration/velocity parameters let the particle to have a smoothed trajectories. But if a particle trajectory is a circle after a while the particle position converge to the center (a normal behaviour of euler integration model). So I decided to change the simulation and use some other interpolation (spline?) or smooth method (kalman filter?) between the targets. Something like: switch( INTERPOLATION_MODEL ): case EULER_MOTION: ... case HERMITE_INTERPOLATION: ... case SPLINE_INTERPOLATION: ... case KALMAN_FILTER_SMOOTHING: ... Now my question: where to write the motion simulation / trajectory interpolation? In the Particle? So I will have some Particle subclass like ParticleEuler, ParticleSpline, ParticleKalman, etc..? Or in the particle engine?

  Read the article

• Authenticate with Django 1.5

  - by gorjuce

  I'm currently testing django 1.5 and a custom User model, but I've some problems. I've created a User class in my account app, which looks like: class User(AbstractBaseUser): email = models.EmailField() activation_key = models.CharField(max_length=255) is_active = models.BooleanField(default=False) is_admin = models.BooleanField(default=False) USERNAME_FIELD = 'email' I can correctly register a user, who is stored in my account_user table. Now, how can I log in? I've tried with: def login(request): form = AuthenticationForm() if request.method == 'POST': form = AuthenticationForm(request.POST) email = request.POST['username'] password = request.POST['password'] user = authenticate(username=email, password=password) if user is not None: if user.is_active: login(user) else: message = 'disabled account, check validation email' return render( request, 'account-login-failed.html', {'message': message} ) return render(request, 'account-login.html', {'form': form}) I can correctly register a new User My forms.py which contains my register form class RegisterForm(forms.ModelForm): """ a form to create user""" password = forms.CharField( label="Password", widget=forms.PasswordInput() ) password_confirm = forms.CharField( label="Password Repeat", widget=forms.PasswordInput() ) class Meta: model = User exclude = ('last_login', 'activation_key') def clean_password_confirm(self): password = self.cleaned_data.get("password") password_confirm = self.cleaned_data.get("password_confirm") if password and password_confirm and password != password_confirm: raise forms.ValidationError("Password don't math") return password_confirm def clean_email(self): if User.objects.filter(email__iexact=self.cleaned_data.get("email")): raise forms.ValidationError("email already exists") return self.cleaned_data['email'] def save(self): user = super(RegisterForm, self).save(commit=False) user.password = self.cleaned_data['password'] user.activation_key = generate_sha1(user.email) user.save() return user My question is: Why does authenticate give me None? I know I'm trying to authenticate() with an email as username but is that not one of the reasons to use a custom User model?

  Read the article

• Designing object oriented programming

  - by Pota Onasys

  Basically, I want to make api calls using an SDK I am writing. I have the following classes: Car CarData (stores input values needed to create a car like model, make, etc) Basically to create a car I do the following: [Car carWithData: cardata onSuccess: successHandler onError: errorHandler] that basically is a factory method that creates instance of Car after making an API call request and populating the new Car class with the response and passes that instance to the successHandler. So "Car" has the above static method to create that car, but also has non-static methods to edit, delete cars (which would make edit, delete API calls to the server) So when the Car create static method passes a new car to the successHandler by doing the following: successHandler([[Car alloc] initWithDictionary: dictionary) The success handler can go ahead and use that new car to do the following: [car update: cardata] [car delete] considering the new car object now has an ID for each car that it can pass to the update and delete API calls. My questions: Do I need a cardata object to store user inputs or can I store them in the car object that would also later store the response from all of the api calls? How can I improve this model? With regards to CarData, note that there might be different inputs for the different API calls. So create function might need to know model, make, etc, but find function might need to know the number of items to find, the limit, the start id, etc.

  Read the article

• Mahout - Clustering - "naming" the cluster elements

  - by Mark Bramnik

  I'm doing some research and I'm playing with Apache Mahout 0.6 My purpose is to build a system which will name different categories of documents based on user input. The documents are not known in advance and I don't know also which categories do I have while collecting these documents. But I do know, that all the documents in the model should belong to one of the predefined categories. For example: Lets say I've collected a N documents, that belong to 3 different groups : Politics Madonna (pop-star) Science fiction I don't know what document belongs to what category, but I know that each one of my N documents belongs to one of those categories (e.g. there are no documents about, say basketball among these N docs) So, I came up with the following idea: Apply mahout clustering (for example k-mean with k=3 on these documents) This should divide the N documents to 3 groups. This should be kind of my model to learn with. I still don't know which document really belongs to which group, but at least the documents are clustered now by group Ask the user to find any document in the web that should be about 'Madonna' (I can't show to the user none of my N documents, its a restriction). Then I want to measure 'similarity' of this document and each one of 3 groups. I expect to see that the measurement for similarity between user_doc and documents in Madonna group in the model will be higher than the similarity between the user_doc and documents about politics. I've managed to produce the cluster of documents using 'Mahout in Action' book. But I don't understand how should I use Mahout to measure similarity between the 'ready' cluster group of document and one given document. I thought about rerunning the cluster with k=3 for N+1 documents with the same centroids (in terms of k-mean clustering) and see whether where the new document falls, but maybe there is any other way to do that? Is it possible to do with Mahout or my idea is conceptually wrong? (example in terms of Mahout API would be really good) Thanks a lot and sorry for a long question (couldn't describe it better) Any help is highly appreciated P.S. This is not a home-work project :)

  Read the article

• Massive Affiliate Shopping Platform. Is WordPress really suitable? [closed]

  - by SPI

  I am working on an online shopping platform that acquires it's data from various affiliate programs through XML files. I am talking hundreds and thousands of items per program here that change often if they go out of stock. My clients choice of CMS was WordPress. I am guessing he assumed the user friendly interface would make life easy for him. However, the fact that he hired me to parse the XML files, store data in the back-end and basically make everything work tells me he had very little clue about what he was getting himself into. My impression is that WordPress has a very specific way of handling data as it divides everything into categories/sub-categories in the back-end which is very counter intuitive to a business model where data exists in numbers of over hundreds and thousands of items and is further cross referenced by programs so that any change in the programs XML file can easily be reflected products page. Conclusion I have a very specific database model implemented for handling my clients needs. However, this model conflicts with how wordpress chooses to save data in the back-end natively. I am absolutely convinced WordPress is geared towards anything that might resemble a blog and definitely not THIS. I am thinking about asking my client to shift to a custom CMS. Before making my pitch though, I wanted to run this by the stack community. Thanks for the input in advance.

  Read the article

• Where do I find scripts generated by SharePoint MCMS Migration Profiles

  - by HipCzeck

  I am attempting to migrate data from an Microsoft Content Management Server (MCMS) 2002 instance into a new Microsoft Office Sharepoint Server (MOSS) 2007 installation using the Manage Microsoft Content Management Server Migration Profiles tool in the Operations space of MOSS Central Administration. When analyzing the profile, I receive 4 warnings, all of which may be safely ignored, but when I actually execute the migration profile, I get the same warnings and an additional error with a description of: Line 6: Incorrect syntax near ';'. I have seen this error numerous times when mucking about in SQL Server and recognize it as a Transact SQL error message, but can't find the actual SQL statement that is being executed so that I may determine the source of the error. EDIT: After enabling verbose logging on the MCMS 2002 Migration category, and poring through the Unified Logging Service (ULS) logs, I received a more complete stack trace at the point of the error, and a couple more anomalies listed below. Anomalies: The following is an abbreviated listing from the ULS logs around the time of the pre-migration analysis. 01 MCMS 2002 Migration Verbose Start ConnectionCheck 02 MCMS 2002 Migration Verbose End ConnectionCheck 03 MCMS 2002 Migration Verbose Start DatabaseCheck 04 MCMS 2002 Migration High Extra table SiteDeployLock will not be migrated 05 MCMS 2002 Migration High Analysis: Extra index PK__SiteDeployLock__05D8E0BE 06 MCMS 2002 Migration Verbose End DatabaseCheck 07 MCMS 2002 Migration Medium Pre-migration analysis: RootCheckTask is skipped because database check is blocked. 08 MCMS 2002 Migration Medium Pre-migration analysis: RightsGroupNameCheckTask is skipped because database check is blocked. 09 MCMS 2002 Migration Medium Pre-migration analysis: InvalidNameCheckTask is skipped because database check is blocked. 10 MCMS 2002 Migration Medium Pre-migration analysis: LeafNameCheckTask is skipped because database check is blocked. 11 MCMS 2002 Migration Medium Pre-migration analysis: LeafLengthCheckTask is skipped because database check is blocked. 12 MCMS 2002 Migration Medium Pre-migration analysis: TemplateNameCheckTask is skipped because database check is blocked. 13 MCMS 2002 Migration Medium Pre-migration analysis: TemplateCollisionCheckTask is skipped because database check is blocked. 14 MCMS 2002 Migration Medium Pre-migration analysis: PlaceholderCheckTask is skipped because database check is blocked. 15 MCMS 2002 Migration Medium Pre-migration analysis: CheckedOutItemsCheckTask is skipped because database check is blocked. 16 MCMS 2002 Migration Medium Pre-migration analysis: SubmittedItemsCheckTask is skipped because database check is blocked. 17 MCMS 2002 Migration Medium Pre-migration analysis: DeletedItemsCheckTask is skipped because database check is blocked. 18 MCMS 2002 Migration Medium Pre-migration analysis: UserCheckTask is skipped because database check is blocked. 19 MCMS 2002 Migration Medium Pre-migration analysis: FileSizeCheckTask is skipped because database check is blocked. 20 MCMS 2002 Migration Medium Pre-migration analysis: HostHeaderMapCheckTask is skipped because database check is blocked. 21 MCMS 2002 Migration Verbose Start Server check 22 MCMS 2002 Migration Verbose End Server check 23 MCMS 2002 Migration Verbose Start Server emptyness check 24 MCMS 2002 Migration Verbose End Server emptyness check 25 MCMS 2002 Migration Medium PreMigrationAnalyzer: Dry run starts 26 MCMS 2002 Migration Verbose CleanLockProcedure: start. 27 MCMS 2002 Migration High CleanLockProcedure: connection system lock is null 28 MCMS 2002 Migration Verbose Finished all tasks 29 MCMS 2002 Migration High PreMigrationAnalyzer ends with True 30 MCMS 2002 Migration Verbose Migration profile status is changed to AnalysisPassed Specifically, the two High level alerts on lines 4 and 5 are reflected in the migration report as warnings when running Pre-migration Analysis or running the migration profile. In addition, two other warnings appear in the migration report indicating two tables containing data (LayoutProperty and NodeLayout) that should be empty. According to the documentation, warnings are not sufficient cause to stop migration from occurring. Other anomalies are on lines 7-20 indicating a series of tests that are skipped because database check is blocked. The ULS doesn't give any additional warnings to indicate that the database check was blocked or exited in exceptional circumstances. After switching the profile from pre-migration analysis to exporting, there is one medium level warning that LastChangeTime is not set or incorrect. (null). As with all the skipped test names and SQL table names from the warnings, the major search engines are unable (with the exception of LayoutProperty) to find any reference to these objects or tests. Finally, the section of the log indicating the actual live migration attempt is appended below: 01 MCMS 2002 Migration Medium LastChangeTime is not set or incorrect. (null) 02 MCMS 2002 Migration Verbose Set export lock 03 MCMS 2002 Migration Verbose CleanLockProcedure: start. 04 MCMS 2002 Migration Verbose CleanLockProcedure: end. 05 MCMS 2002 Migration Verbose Prepare for export 06 MCMS 2002 Migration Verbose Open connection... 07 MCMS 2002 Migration Verbose Create temporary stored procedures 08 MCMS 2002 Migration Verbose Create temporary tables... 09 MCMS 2002 Migration Verbose Initialize temporary tables... 10 MCMS 2002 Migration Verbose InitializeTemporaryTables: start 11 MCMS 2002 Migration Verbose Initialize export table... 12 MCMS 2002 Migration Verbose InitializeExportTable: start 13 MCMS 2002 Migration Verbose CleanLockProcedure: start. 14 MCMS 2002 Migration Verbose CleanLockProcedure: end. 15 MCMS 2002 Migration High Migration throws exception: Line 6: Incorrect syntax near ';'.. Stacktrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.SharePoint.Publishing.Internal.Administration... 16 MCMS 2002 Migration High ....MigrationBatchCommand.ExecuteImmediate(String command) at Microsoft.SharePoint.Publishing.Internal.Administration.MigrationBatchCommand.ExecuteWaitingCommands() at Microsoft.SharePoint.Publishing.Internal.Administration.MigrationDBSerializer.SerializeSelectedExportObject(StringCollection objectAttribs) at Microsoft.SharePoint.Publishing.Internal.Administration.MigrationDataAccess.InitializeExportTable(ScopeType scopeType) at Microsoft.SharePoint.Publishing.Internal.Administration.MigrationDataAccess.InitializeTemporaryTables(DateTime lastChangeTime) at Microsoft.SharePoint.Publishing.Internal.Administration.MigrationDataAccess.InitializeDatabase(DateTime lastChangeTime, Boolean isAnalysis, SqlConnection connection) at Microsoft.SharePoint.Publishing.Internal.Admin... 17 MCMS 2002 Migration High ...stration.MigrationDataAccess.InitializeDatabase(DateTime lastChangeTime, Boolean isAnalysis) at Microsoft.SharePoint.Publishing.Administration.ContentMigration.Export(MigrationDataAccess dataAccess) at Microsoft.SharePoint.Publishing.Administration.ContentMigration.MigrateInternal(). 18 MCMS 2002 Migration Verbose MigrationProfile: GetInstance. Start. 19 MCMS 2002 Migration Verbose MigrationProfile: GetInstance. End. 20 MCMS 2002 Migration Verbose Migration profile status is changed to Failed The stack trace of the failed parsing of the SQL command appear on lines 15-17. A cleaner version of the stack trace is appended below. Full Stack Trace: Migration throws exception: Line 6: Incorrect syntax near ';'.. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning( TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.SharePoint.Publishing.Internal.Administration.MigrationBatchCommand .ExecuteImmediate(String command) at Microsoft.SharePoint.Publishing.Internal.Administration.MigrationBatchCommand .ExecuteWaitingCommands() at Microsoft.SharePoint.Publishing.Internal.Administration.MigrationDBSerializer .SerializeSelectedExportObject(StringCollection objectAttribs) at Microsoft.SharePoint.Publishing.Internal.Administration.MigrationDataAccess .InitializeExportTable(ScopeType scopeType) at Microsoft.SharePoint.Publishing.Internal.Administration.MigrationDataAccess .InitializeTemporaryTables(DateTime lastChangeTime) at Microsoft.SharePoint.Publishing.Internal.Administration.MigrationDataAccess .InitializeDatabase(DateTime lastChangeTime, Boolean isAnalysis, SqlConnection connection) at Microsoft.SharePoint.Publishing.Internal.Administration.MigrationDataAccess .InitializeDatabase(DateTime lastChangeTime, Boolean isAnalysis) at Microsoft.SharePoint.Publishing.Administration.ContentMigration.Export (MigrationDataAccess dataAccess) at Microsoft.SharePoint.Publishing.Administration.ContentMigration .MigrateInternal(). None of this log information indicates the SQL command that is failing a parser check. I've checked the SQL servers hosting the source and destination databases for a trace of the query, but neither seems to have triggered the parse failure condition. That appears to have happened on the SharePoint server. Are there any other locations I should investigate that might tell me where to find the source of the error?

  Read the article

• ASP.Net MVC 2 DropDownListFor in EditorTemplate

  - by tschreck

  I have a view model that looks like this: namespace AutoForm.Models { public class ProductViewModel { [UIHint("DropDownList")] public String Category { get; set; } [ScaffoldColumn(false)] public IEnumerable<SelectListItem> CategoryList { get; set; } ... } } It has Category and CategoryList properties. The CategoryList is the source data for the Category dropdown UI element. I have an EditorTemplate that looks like this: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<ProductViewModel>" %> <%@ Import Namespace="AutoForm.Models"%> <%=Html.DropDownListFor(m => m.Category , Model.CategoryList ) %> NOTE: this EditorTemplate is strongly typed to ProductViewModel My Controller is populating CategoryList property with data from a database. I cannot get the DropDownListFor template to render a drop down list with data from CategoryList. I know CategoryList is getting populated with data in the controller because I see the data when I debug and step through the controller. Here's my error message in the browser: Server Error in '/' Application. Object reference not set to an instance of an object. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.NullReferenceException: Object reference not set to an instance of an object. Source Error: Line 2: <%@ Import Namespace="AutoForm.Models"% Line 3: Line 4: <%=Html.DropDownListFor(m = m.Category, Model.CategoryList) % Source File: c:\ProjectStore\AutoForm\AutoForm\Views\Shared\EditorTemplates\DropDownList.ascx Line: 4 Any ideas? Thanks Tom As a followup, I noticed that ViewData.Model is null when I'm stepping through the code in the EditorTemplate. I have the EditorTemplate strongly typed to "ProductViewModel" which is also the type that's passed to the View in the controller. I'm perplexed as to why ViewData.Model is null even though it's getting populated in the controller before getting passed to the view.

  Read the article

• Oracle Enterprise Manager 11g Application Management Suite for Oracle E-Business Suite Now Available

  - by chung.wu

  Oracle Enterprise Manager 11g Application Management Suite for Oracle E-Business Suite is now available. The management suite combines features that were available in the standalone Application Management Pack for Oracle E-Business Suite and Application Change Management Pack for Oracle E-Business Suite with Oracle's market leading real user monitoring and configuration management capabilities to provide the most complete solution for managing E-Business Suite applications. The features that were available in the standalone management packs are now packaged into Oracle E-Business Suite Plug-in 4.0, which is now fully certified with Oracle Enterprise Manager 11g Grid Control. This latest plug-in extends Grid Control with E-Business Suite specific management capabilities and features enhanced change management support. In addition, this latest release of Application Management Suite for Oracle E-Business Suite also includes numerous real user monitoring improvements. General Enhancements This new release of Application Management Suite for Oracle E-Business Suite offers the following key capabilities: Oracle Enterprise Manager 11g Grid Control Support: All components of the management suite are certified with Oracle Enterprise Manager 11g Grid Control. Built-in Diagnostic Ability: This release has numerous major enhancements that provide the necessary intelligence to determine if the product has been installed and configured correctly. There are diagnostics for Discovery, Cloning, and User Monitoring that will validate if the appropriate patches, privileges, setups, and profile options have been configured. This feature improves the setup and configuration time to be up and operational. Lifecycle Automation Enhancements Application Management Suite for Oracle E-Business Suite provides a centralized view to monitor and orchestrate changes (both functional and technical) across multiple Oracle E-Business Suite systems. In this latest release, it provides even more control and flexibility in managing Oracle E-Business Suite changes.Change Management: Built-in Diagnostic Ability: This latest release has numerous major enhancements that provide the necessary intelligence to determine if the product has been installed and configured correctly. There are diagnostics for Customization Manager, Patch Manager, and Setup Manager that will validate if the appropriate patches, privileges, setups, and profile options have been configured. Enhancing the setup time and configuration time to be up and operational. Customization Manager: Multi-Node Custom Application Registration: This feature automates the process of registering and validating custom products/applications on every node in a multi-node EBS system. Public/Private File Source Mappings and E-Business Suite Mappings: File Source Mappings & E-Business Suite Mappings can be created and marked as public or private. Only the creator/owner can define/edit his/her own mappings. Users can use public mappings, but cannot edit or change settings. Test Checkout Command for Versions: This feature allows you to test/verify checkout commands at the version level within the File Source Mapping page. Prerequisite Patch Validation: You can specify prerequisite patches for Customization packages and for Release 12 Oracle E-Business Suite packages. Destination Path Population: You can now automatically populate the Destination Path for common file types during package construction. OAF File Type Support: Ability to package Oracle Application Framework (OAF) customizations and deploy them across multiple Oracle E-Business Suite instances. Extended PLL Support: Ability to distinguish between different types of PLLs (that is, Report and Forms PLL files). Providing better granularity when managing PLL objects. Enhanced Standard Checker: Provides greater and more comprehensive list of coding standards that are verified during the package build process (for example, File Driver exceptions, Java checks, XML checks, SQL checks, etc.) HTML Package Readme: The package Readme is in HTML format and includes the file listing. Advanced Package Search Capabilities: The ability to utilize more criteria within the advanced search package (that is, Public, Last Updated by, Files Source Mapping, and E-Business Suite Mapping). Enhanced Package Build Notifications: More detailed information on the results of a package build process. Better, more detailed troubleshooting guidance in the event of build failures. Patch Manager:Staged Patches: Ability to run Patch Manager with no external internet access. Customer can download Oracle E-Business Suite patches into a shared location for Patch Manager to access and apply. Supports highly secured production environments that prohibit external internet connections. Support for Superseded Patches: Automatic check for superseded patches. Allows users to easily add superseded patches into the Patch Run. More comprehensive and correct Patch Runs. Removes many manual and laborious tasks, frees up Apps DBAs for higher value-added tasks. Automatic Primary Node Identification: Users can now specify which is the "primary node" (that is, which node hosts the Shared APPL_TOP) during the Patch Run interview process, available for Release 12 only. Setup Manager:Preview Extract Results: Ability to execute an extract in "proof mode", and examine the query results, to determine accuracy. Used in conjunction with the "where" clause in Advanced Filtering. This feature can provide better and more accurate fine tuning of extracts. Use Uploaded Extracts in New Projects: Ability to incorporate uploaded extracts in new projects via new LOV fields in package construction. Leverages the Setup Manager repository to access extracts that have been uploaded. Allows customer to reuse uploaded extracts to provision new instances. Re-use Existing (that is, historical) Extracts in New Projects: Ability to incorporate existing extracts in new projects via new LOV fields in package construction. Leverages the Setup Manager repository to access point-in-time extracts (snapshots) of configuration data. Allows customer to reuse existing extracts to provision new instances. Allows comparative historical reporting of identical APIs, executed at different times. Support for BR100 formats: Setup Manager can now automatically produce reports in the BR100 format. Native support for industry standard formats. Concurrent Manager API Support: General Foundation now provides an API for management of "Concurrent Manager" configuration data. Ability to migrate Concurrent Managers from one instance to another. Complete the setup once and never again; no need to redefine the Concurrent Managers. User Experience Management Enhancements Application Management Suite for Oracle E-Business Suite includes comprehensive capabilities for user experience management, supporting both real user and synthetic transaction based user monitoring techniques. This latest release of the management suite include numerous improvements in real user monitoring support. KPI Reporting: Configurable decimal precision for reporting of KPI and SLA values. By default, this is two decimal places. KPI numerator and denominator information. It is now possible to view KPI numerator and denominator information, and to have it available for export. Content Messages Processing: The application content message facility has been extended to distinguish between notifications and errors. In addition, it is now possible to specify matching rules that can be used to refine a selected content message specification. Note this is only available for XPath-based (not literal) message contents. Data Export: The Enriched data export facility has been significantly enhanced to provide improved performance and accessibility. Data is no longer stored within XML-based files, but is now stored within the Reporter database. However, it is possible to configure an alternative database for its storage. Access to the export data is through SQL. With this enhancement, it is now more easy than ever to use tools such as Oracle Business Intelligence Enterprise Edition to analyze correlated data collected from real user monitoring and business data sources. SNMP Traps for System Events: Previously, the SNMP notification facility was only available for KPI alerting. It has now been extended to support the generation of SNMP traps for system events, to provide external health monitoring of the RUEI system processes. Performance Improvements: Enhanced dashboard performance. The dashboard facility has been enhanced to support the parallel loading of items. In the case of dashboards containing large numbers of items, this can result in a significant performance improvement. Initial period selection within Data Browser and reports. The User Preferences facility has been extended to allow you to specify the initial period selection when first entering the Data Browser or reports facility. The default is the last hour. Performance improvement when querying the all sessions group. Technical Prerequisites, Download and Installation Instructions The Linux version of the plug-in is available for immediate download from Oracle Technology Network or Oracle eDelivery. For specific information regarding technical prerequisites, product download and installation, please refer to My Oracle Support note 1224313.1. The following certifications are in progress: * Oracle Solaris on SPARC (64-bit) (9, 10) * HP-UX Itanium (11.23, 11.31) * HP-UX PA-RISC (64-bit) (11.23, 11.31) * IBM AIX on Power Systems (64-bit) (5.3, 6.1)

  Read the article

• Django: What's an awesome plugin to maintain images in the admin?

  - by meder

  I have an articles entry model and I have an excerpt and description field. If a user wants to post an image then I have a separate ImageField which has the default standard file browser. I've tried using django-filebrowser but I don't like the fact that it requires django-grappelli nor do I necessarily want a flash upload utility - can anyone recommend a tool where I can manage image uploads, and basically replace the file browse provided by django with an imagepicking browser? In the future I'd probably want it to handle image resizing and specify default image sizes for certain article types. Edit: I'm trying out adminfiles now but I'm having issues installing it. I grabbed it and added it to my python path, added it to INSTALLED_APPS, created the databases for it, uploaded an image. I followed the instructions to modify my Model to specify adminfiles_fields and registered but it's not applying in my admin, here's my admin.py for articles: from django.contrib import admin from django import forms from articles.models import Category, Entry from tinymce.widgets import TinyMCE from adminfiles.admin import FilePickerAdmin class EntryForm( forms.ModelForm ): class Media: js = ['/media/tinymce/tiny_mce.js', '/media/tinymce/load.js']#, '/media/admin/filebrowser/js/TinyMCEAdmin.js'] class Meta: model = Entry class CategoryAdmin(admin.ModelAdmin): prepopulated_fields = { 'slug': ['title'] } class EntryAdmin( FilePickerAdmin ): adminfiles_fields = ('excerpt',) prepopulated_fields = { 'slug': ['title'] } form = EntryForm admin.site.register( Category, CategoryAdmin ) admin.site.register( Entry, EntryAdmin ) Here's my Entry model: class Entry( models.Model ): LIVE_STATUS = 1 DRAFT_STATUS = 2 HIDDEN_STATUS = 3 STATUS_CHOICES = ( ( LIVE_STATUS, 'Live' ), ( DRAFT_STATUS, 'Draft' ), ( HIDDEN_STATUS, 'Hidden' ), ) status = models.IntegerField( choices=STATUS_CHOICES, default=LIVE_STATUS ) tags = TagField() categories = models.ManyToManyField( Category ) title = models.CharField( max_length=250 ) excerpt = models.TextField( blank=True ) excerpt_html = models.TextField(editable=False, blank=True) body_html = models.TextField( editable=False, blank=True ) article_image = models.ImageField(blank=True, upload_to='upload') body = models.TextField() enable_comments = models.BooleanField(default=True) pub_date = models.DateTimeField(default=datetime.datetime.now) slug = models.SlugField(unique_for_date='pub_date') author = models.ForeignKey(User) featured = models.BooleanField(default=False) def save( self, force_insert=False, force_update= False): self.body_html = markdown(self.body) if self.excerpt: self.excerpt_html = markdown( self.excerpt ) super( Entry, self ).save( force_insert, force_update ) class Meta: ordering = ['-pub_date'] verbose_name_plural = "Entries" def __unicode__(self): return self.title Edit #2: To clarify I did move the media files to my media path and they are indeed rendering the image area, I can upload fine, the <<<image>>> tag is inserted into my editable MarkItUp w/ Markdown area but it isn't rendering in the MarkItUp preview - perhaps I just need to apply the |upload_tags into that preview. I'll try adding it to my template which posts the article as well.

  Read the article

• Blend for Visual Studio 2013 Prototyping Applications with SketchFlow

  - by T

  Originally posted on: http://geekswithblogs.net/tburger/archive/2014/08/10/blend-for-visual-studio-2013-prototyping-applications-with-sketchflow.aspxSketchFlow enables rapid creating of dynamic interface mockups very quickly. The SketchFlow workspace is the same as the standard Blend workspace with the inclusion of three panels: the SketchFlow Feedback panel, the SketchFlow Animation panel and the SketchFlow Map panel. By using SketchFlow to prototype, you can get feedback early in the process. It helps to surface possible issues, lower development iterations, and increase stakeholder buy in. SketchFlow prototypes not only provide an initial look but also provide a way to add additional ideas and input and make sure the team is on track prior to investing in complete development. When you have completed the prototyping, you can discard the prototype and just use the lessons learned to design the application from or extract individual elements from your prototype and include them in the application. I don’t recommend trying to transition the entire project into a development project. Objects that you add with the SketchFlow style have a hand-sketched look. The sketch style is used to remind stakeholders that this is a prototype. This encourages them to focus on the flow and functionality without getting distracted by design details. The sketchflow assets are under sketchflow in the asset panel and are identifiable by the postfix “–Sketch”. For example “Button-Sketch”. You can mix sketch and standard controls in your interface, if required. Be creative, if there is a missing control or your interface has a different look and feel than the out of the box one, reuse other sketch controls to mimic the functionality or look and feel. Only use standard controls if it doesn’t distract from the idea that this is a prototype and not a standard application. The SketchFlow Map panel provides information about the structure of your application. To create a new screen in your prototype: Right-click the map surface and choose “Create a Connected Screen”. Name the screens with names that are meaningful to the stakeholders. The start screen is the one that has the green arrow. To change the start screen, right click on any other screen and set to start screen. Only one screen can be the start screen at a time. Rounded screen are component screens to mimic reusable custom controls that will be built into the final application. You can change the colors of all of the boxes and should use colors to create functional groupings. The groupings can be identified in the SketchFlow Project Settings. To add connections between screens in the SketchFlow Map panel. Move the mouse over a screen in the SketchFlow and a menu will appear at the bottom of the screen node. In the menu, click Connect to an existing screen. Drag the arrow to another screen on the Map. You add navigation to your prototype by adding connections on the SketchFlow map or by adding navigation directly to items on your interface. To add navigation from objects on the artboard, right click the item then from the menu, choose “Navigate to”. This will expose a sub-menu with available screens, backward, or forward. When the map has connected screens, the SketchFlow Player displays the connected screens on the Navigate sidebar. All screens show in the SketchFlow Player Map. To see the SketchFlow Player, run your SketchFlow prototype. The Navigation sidebar is meant to show the desired user work flow. The map can be used to view the different screens regardless of suggested navigation in the navigation bar. The map is able to be hidden and shown. As mentioned, a component screen is a shared screen that is used in more than one screen and generally represents what will be a custom object in the application. To create a component screen, you can create a screen, right click on it in the SketchFlow Map and choose “Make into component screen”. You can mouse over a screen and from the menu that appears underneath, choose create and insert component screen. To use an existing screen, select if from the Asset panel under SketchFlow, Components. You can use Storyboards and Visual State animations in your SketchFlow project. However, SketchFlow also offers its own animation technique that is simpler and better suited for prototyping. The SketchFlow Animation panel is above your artboard by default. In SketchFlow animation, you create frames and then position the elements on your interface for each frame. You then specify elapsed time and any effects you want to apply to the transition. The + at the top is what creates new frames. Once you have a new Frame, select it and change the property you want to animate. In the example above, I changed the Text of the result box. You can adjust the time between frames in the lower area between the frames. The easing and effects functions are changed in the center between each frame. You edit the hold time for frames by clicking the clock icon in the lower left and the hold time will appear on each frame and can be edited. The FluidLayout icon (also located in the lower left) will create smooth transitions. Next to the FluidLayout icon is the name of that Animation. You can rename the animation by clicking on it and editing the name. The down arrow chevrons next to the name allow you to view the list of all animations in this prototype and select them for editing. To add the animation to the interface object (such as a button to start the animation), select the PlaySketchFlowAnimationAction from the SketchFlow behaviors in the Assets menu and drag it to an object on your interface. With the PlaySketchFlowAnimationAction that you just added selected in the Objects and Timeline, edit the properties to change the EventName to the event you want and choose the SketchFlowAnimation you want from the drop down list. You may want to add additional information to your screens that isn’t really part of the prototype but is relevant information or a request for clarification or feedback from the reviewer. You do this with annotations or notes. Both appear on the user interface, however, annotations can be switched on or off at design and review time. Notes cannot be switched off. To add an Annotation, chose the Create Annotation from the Tools menu. The annotation appears on the UI where you will add the notes. To display or Hide annotations, click the annotation toggle at the bottom right on the artboard . After to toggle annotations on, the identifier of the person who created them appears on the artboard and you must click that to expand the notes. To add a note to the artboard, simply select the Note-Sketch from Assets ->SketchFlow ->Styles ->Sketch Styles. Drag and drop it to the artboard and place where you want it. When you are ready for users to review the prototype, you have a few options available. Click File -> Export and choose one of the options from the list: Publish to Sharepoint, Package SketchFlowProject, Export to Microsoft Word, or Export as Images. I suggest you play with as many of the options as you can to see what they do. Both the Sharepoint and Packaged SketchFlowProject allow you to collect feedback from one or more users that you can import into the project. The user can make notes on the UI and in the Feedback area in the bottom left corner of the player. When the user is done adding feedback, it is exported from the right most folder icon in the My Feedback panel. Feeback is imported on a panel named SketchFlow Feedback. To get that panel to show up, select Window -> SketchFlow Feedback. Once you have the panel showing, click the + in the upper right of the panel and find the notes you exported. When imported, they will show up in a list and on the artboard. To document your prototype, use the Export to Microsoft Word option from the File menu. That should get you started with prototyping.

  Read the article

• Building a template to auto-scaffold Index views in ASP.NET MVC

  - by DanM

  I'm trying to write an auto-scaffolder for Index views. I'd like to be able to pass in a collection of models or view-models (e.g., IQueryable<MyViewModel>) and get back an HTML table that uses the DisplayName attribute for the headings (th elements) and Html.Display(propertyName) for the cells (td elements). Each row should correspond to one item in the collection. Here's what I have so far: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl" %> <% var items = (IQueryable<TestProj.ViewModels.TestViewModel>)Model; // Should be generic! var properties = items.First().GetMetadata().Properties .Where(pm => pm.ShowForDisplay && !ViewData.TemplateInfo.Visited(pm)); %> <table> <tr> <% foreach(var property in properties) { %> <th> <%= property.DisplayName %> </th> <% } %> </tr> <% foreach(var item in items) { %> <tr> <% foreach(var property in properties) { %> <td> <%= Html.Display(property.DisplayName) %> // This doesn't work! </td> <% } %> </tr> <% } %> </table> Two problems with this: I'd like it to be generic. So, I'd like to replace var items = (IQueryable<TestProj.ViewModels.TestViewModel>)Model; with var items = (IQueryable<T>)Model; or something to that effect. The <td> elements are not working because the Html in <%= Html.Display(property.DisplayName) %> contains the model for the view, which is a collection of items, not the item itself. Somehow, I need to obtain an HtmlHelper object whose Model property is the current item, but I'm not sure how to do that. How do I solve these two problems?

  Read the article

• How to setup an hibernate project using annotations compliant with JPA2.0

  - by phmr

  I would like to setup an hibernate project, for this I use the lastest hibernate 3.5-Final. BTW my IDE is Netbeans. The problem is that each time a run the application, it seems to start from a fresh database whatever db backend I use (I tried hsqldb & sqlite): here is my persistence.xml <?xml version="1.0" encoding="UTF-8"?> <persistence version="1.0" xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd"> <persistence-unit name="PMMPU" transaction-type="RESOURCE_LOCAL"> <provider>org.hibernate.ejb.HibernatePersistence</provider> <class>model.Extrait</class> <class>model.Mot</class> <class>model.Prefixe</class> <class>model.Suffixe</class> <class>model.Texte</class> <properties> <property name="hibernate.dialect" value="dialect.SQLiteDialect"/> <property name="hibernate.connection.username" value=""/> <property name="hibernate.connection.driver_class" value="org.sqlite.JDBC"/> <property name="hibernate.connection.password" value=""/> <property name="hibernate.connection.url" value="jdbc:sqlite:test.db"/> <property name="hibernate.cache.provider_class" value="org.hibernate.cache.NoCacheProvider"/> <property name="hibernate.hbm2ddl.auto" value="update"/> </properties> </persistence-unit> </persistence> I tried to change hibernate.hbm2ddl.auto value. I got a HibernateUtil class which takes care of creating the emf & em: public class HibernateUtil { private static EntityManagerFactory emf = null; private static EntityManager em = null; public static EntityManagerFactory getEmf() { if(emf == null) emf = Persistence.createEntityManagerFactory("PMMPU"); return emf; } public static EntityManager getEm() { if(em == null) em = getEmf().createEntityManager(); return em; } What did a I do wrong ? edit1: further research with mysql lead me to think that the problem is related to sqlite & hsqldb interaction with hibernate 3.5

  Read the article

• Error when compiling code with the Protege API

  - by Anto

  I am new to Protege API and I have just created on Eclipse a small application which uses an external OWL file. Also I did import all the necessary libraries. import java.util.Collection; import java.util.Iterator; import edu.stanford.smi.protege.exception.OntologyLoadException; import edu.stanford.smi.protegex.owl.ProtegeOWL; import edu.stanford.smi.protegex.owl.model.*; public class Trial { public static void main(String[] args) throws OntologyLoadException{ String uri = "C:/Documents and Settings/Anto/Desktop/travel.owl"; OWLModel owlModel = ProtegeOWL.createJenaOWLModelFromURI(uri); Collection classes = owlModel.getUserDefinedOWLNamedClasses(); for(Iterator it = classes.iterator(); it.hasNext();){ OWLNamedClass cls = (OWLNamedClass) it.next(); Collection instances = cls.getInstances(false); System.out.println("Class " + cls.getBrowserText()+ " (" + instances.size()+")"); for(Iterator jt = instances.iterator(); jt.hasNext();){ OWLIndividual individual = (OWLIndividual) jt.next(); System.out.println(" - "+ individual.getBrowserText()); } } } } When I do compile however I get the following errors: WARNING: [Local Folder Repository] The specified file must be a directory. (C:\Documents and Settings\Anto\My Documents\Eclipse Workspace\ProtegeTrial\plugins\edu.stanford.smi.protegex.owl) LocalFolderRepository.update() SEVERE: Exception caught -- java.net.URISyntaxException: Illegal character in path at index 12: C:/Documents and Settings/CiuffreA/Desktop/travel.owl at java.net.URI$Parser.fail(URI.java:2809) at java.net.URI$Parser.checkChars(URI.java:2982) at java.net.URI$Parser.parseHierarchical(URI.java:3066) at java.net.URI$Parser.parse(URI.java:3014) at java.net.URI.<init>(URI.java:578) at edu.stanford.smi.protegex.owl.jena.JenaKnowledgeBaseFactory.getFileURI(Unknown Source) at edu.stanford.smi.protegex.owl.jena.JenaKnowledgeBaseFactory.loadKnowledgeBase(Unknown Source) at edu.stanford.smi.protege.model.Project.loadDomainKB(Unknown Source) at edu.stanford.smi.protege.model.Project.createDomainKnowledgeBase(Unknown Source) at edu.stanford.smi.protegex.owl.jena.creator.OwlProjectFromUriCreator.create(Unknown Source) at edu.stanford.smi.protegex.owl.ProtegeOWL.createJenaOWLModelFromURI(Unknown Source) at Trial.main(Trial.java:14) Exception in thread "main" java.lang.NullPointerException at edu.stanford.smi.protegex.owl.jena.JenaKnowledgeBaseFactory.loadKnowledgeBase(Unknown Source) at edu.stanford.smi.protege.model.Project.loadDomainKB(Unknown Source) at edu.stanford.smi.protege.model.Project.createDomainKnowledgeBase(Unknown Source) at edu.stanford.smi.protegex.owl.jena.creator.OwlProjectFromUriCreator.create(Unknown Source) at edu.stanford.smi.protegex.owl.ProtegeOWL.createJenaOWLModelFromURI(Unknown Source) at Trial.main(Trial.java:14) Does anyone have an idea on where the problem should be?

  Read the article

• NSObjectController confusion binding to a class property. Help!

  - by scottw

  Hi, I'm teaching myself cocoa and enjoying the experience most of the time. I have been struggling all day with a simple problem that google has let me down on. I have read the Cocoa Bindings Program Topics and think I grok it but still can't solve my issue. I have a very simple class called MTSong that has various properties. I have used @synthesize to create getter/setters and can use KVC to change properties. i.e in my app controller the following works: mySong = [[MTSong alloc]init]; [mySong setValue:@"2" forKey:@"version"]; In case I am doing something noddy in my class code MTSong.h is: #import <Foundation/Foundation.h> @interface MTSong : NSObject { NSNumber *version; NSString *name; } @property(readwrite, assign) NSNumber *version; @property(readwrite, assign) NSString *name; @end and MTSong.m is: #import "MTSong.h" @implementation MTSong - (id)init { [super init]; return self; } - (void)dealloc { [super dealloc]; } @synthesize version; @synthesize name; @end In Interface Builder I have a label (NSTextField) that I want to update whenever I use KVC to change the version of the song. I do the following: Drag NSObjectController object into the doc window and in the Inspector-Attributes I set: Mode: Class Class Name: MTSong Add a key called version and another called name Go to Inspector-Bindings-Controller Content Bind To: File's Owner (Not sure this is right...) Model Key Path: version Select the cell of the label and go to Inspector Bind to: Object Controller Controller Key: mySong Model Key Path: version I have attempted changing the Model Key Path in step 2 to "mySong" which makes more sense but the compiler complains. Any suggestions would be greatly appreciated. Scott Update Post Comments I wasn't exposing mySong property so have changed my AppController.h to be: #import <Cocoa/Cocoa.h> @class MTSong; @interface AppController : NSObject { IBOutlet NSButton *start; IBOutlet NSTextField *tf; MTSong *mySong; } -(IBAction)convertFile:(id)sender; @end I suspect File's owner was wrong as I am not using a document based application and I need to bind to the AppController, so step 2 is now: Go to Inspector-Bindings-Controller Content Bind To: App Controller Model Key Path: mySong I needed to change 3. to Select the cell of the label and go to Inspector Bind to: Object Controller Controller Key: selection Model Key Path: version All compiles and is playing nice!

  Read the article

• Auto-scaffolding an "index" view in ASP.NET MVC

  - by DanM

  I'm trying to write an auto-scaffolder for Index views. I'd like to be able to pass in a collection of models or view-models (e.g., IQueryable<MyViewModel>) and get back an HTML table that uses the DisplayName attribute for the headings (th elements) and Html.Display(propertyName) for the cells (td elements). Each row should correspond to one item in the collection. Here's what I have so far: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl" %> <% var items = (IQueryable<TestProj.ViewModels.TestViewModel>)Model; // Should be generic! var properties = items.First().GetMetadata().Properties .Where(pm => pm.ShowForDisplay && !ViewData.TemplateInfo.Visited(pm)); %> <table> <tr> <% foreach(var property in properties) { %> <th> <%= property.DisplayName %> </th> <% } %> </tr> <% foreach(var item in items) { %> <tr> <% foreach(var property in properties) { %> <td> <%= Html.Display(property.DisplayName) %> // This doesn't work! </td> <% } %> </tr> <% } %> </table> Two problems with this: I'd like it to be generic. So, I'd like to replace var items = (IQueryable<TestProj.ViewModels.TestViewModel>)Model; with var items = (IQueryable<T>)Model; or something to that effect. The <td> elements are not working because the Html in <%= Html.Display(property.DisplayName) %> contains the model for the view, which is a collection of items, not the item itself. Somehow, I need to obtain an HtmlHelper object whose Model property is the current item, but I'm not sure how to do that. How do I solve these two problems?

  Read the article

• Page expired issue with back button and wicket SortableDataProvider and DataTable

  - by David

  Hi, I've got an issue with SortableDataProvider and DataTable in wicket. I've defined my DataTable as such: IColumn<Column>[] columns = new IColumn[9]; //column values are mapped to the private attributes listed in ColumnImpl.java columns[0] = new PropertyColumn(new Model("#"), "columnPosition", "columnPosition"); columns[1] = new PropertyColumn(new Model("Description"), "description"); columns[2] = new PropertyColumn(new Model("Type"), "dataType", "dataType"); Adding it to the table: DataTable<Column> dataTable = new DataTable<Column>("columnsTable", columns, provider, maxRowsPerPage) { @Override protected Item<Column> newRowItem(String id, int index, IModel<Column> model) { return new OddEvenItem<Column>(id, index, model); } }; My data provider: public class ColumnSortableDataProvider extends SortableDataProvider<Column> { private static final long serialVersionUID = 1L; private List list = null; public ColumnSortableDataProvider(Table table, String sortProperty) { this.list = Arrays.asList(table.getColumns().toArray(new Column[0])); setSort(sortProperty, true); } public ColumnSortableDataProvider(List list, String sortProperty) { this.list = list; setSort(sortProperty, true); } @Override public Iterator iterator(int first, int count) { /* first - first row of data count - minimum number of elements to retrieve So this method returns an iterator capable of iterating over {first, first+count} items */ Iterator iterator = null; try { if(getSort() != null) { Collections.sort(list, new Comparator() { private static final long serialVersionUID = 1L; @Override public int compare(Column c1, Column c2) { int result=1; PropertyModel<Comparable> model1= new PropertyModel<Comparable>(c1, getSort().getProperty()); PropertyModel<Comparable> model2= new PropertyModel<Comparable>(c2, getSort().getProperty()); if(model1.getObject() == null && model2.getObject() == null) result = 0; else if(model1.getObject() == null) result = 1; else if(model2.getObject() == null) result = -1; else result = ((Comparable)model1.getObject()).compareTo(model2.getObject()); result = getSort().isAscending() ? result : -result; return result; } }); } if (list.size() (first+count)) iterator = list.subList(first, first+count).iterator(); else iterator = list.iterator(); } catch (Exception e) { e.printStackTrace(); } return iterator; } The problem is the following: - I click a column header to sort by that column. - I navigate to a different page - I click Back (or Forward if I do the opposite scenario) - Page has expired. It'd be nice to generate the page using PageParameters but I somehow need to intercept the sort event to do so. Any pointers would be greatly appreciated. Thanks a ton!! David

  Read the article

• Get HDD (and NOT Volume) Serial Number on Vista Ultimate 64 bit

  - by TheAgent

  Hi all. I was once looking for getting the HDD serial number without using WMI, and I found it. The code I found and posted on StackOverFlow.com works very well on 32 bit Windows, both XP and Vista. The trouble only begins when I try to get the serail number on 64 bit OSs (Vista Ultimate 64, specifically). The code returns String.Empty, or a Space all the time. Anyone got an idea how to fix this? EDIT: I used the tools Dave Cluderay suggested, with interesting results: Here is the output from DiskId32, on Windows XP SP2 32-bit: To get all details use "diskid32 /d" Trying to read the drive IDs using physical access with admin rights Drive 0 - Primary Controller - - Master drive Drive Model Number________________: [MAXTOR STM3160215AS] Drive Serial Number_______________: [ 6RA26XK3] Drive Controller Revision Number__: [3.AAD] Controller Buffer Size on Drive___: 2097152 bytes Drive Type________________________: Fixed Drive Size________________________: 160041885696 bytes Trying to read the drive IDs using the SCSI back door Drive 4 - Tertiary Controller - - Master drive Drive Model Number________________: [MAXTOR STM3160215AS] Drive Serial Number_______________: [ 6RA26XK3] Drive Controller Revision Number__: [3.AAD] Controller Buffer Size on Drive___: 2097152 bytes Drive Type________________________: Fixed Drive Size________________________: 160041885696 bytes Trying to read the drive IDs using physical access with zero rights **** STORAGE_DEVICE_DESCRIPTOR for drive 0 **** Vendor Id = [] Product Id = [MAXTOR STM3160215AS] Product Revision = [3.AAD] Serial Number = [] **** DISK_GEOMETRY_EX for drive 0 **** Disk is fixed DiskSize = 160041885696 Trying to read the drive IDs using Smart Drive 0 - Primary Controller - - Master drive Drive Model Number________________: [MAXTOR STM3160215AS] Drive Serial Number_______________: [ 6RA26XK3] Drive Controller Revision Number__: [3.AAD] Controller Buffer Size on Drive___: 2097152 bytes Drive Type________________________: Fixed Drive Size________________________: 160041885696 bytes Hard Drive Serial Number__________: 6RA26XK3 Hard Drive Model Number___________: MAXTOR STM3160215AS And DiskId32 run on Windows Vista Ultimate 64-bit: To get all details use "diskid32 /d" Trying to read the drive IDs using physical access with admin rights Trying to read the drive IDs using the SCSI back door Trying to read the drive IDs using physical access with zero rights **** STORAGE_DEVICE_DESCRIPTOR for drive 0 **** Vendor Id = [MAXTOR S] Product Id = [TM3160215AS] Product Revision = [3.AA] Serial Number = [] **** DISK_GEOMETRY_EX for drive 0 **** Disk is fixed DiskSize = 160041885696 Trying to read the drive IDs using Smart Hard Drive Serial Number__________: Hard Drive Model Number___________: Notice how much lesser the information is on Vista, and how the Serial Number is not returned. Also the other tool, EnumDisk, refers to my hard disks on Vista as "SCSI" as opposed to "ATA" on Windows XP. Any ideas? EDIT 2: I'm posting the results from EnumDisks: On Windows XP SP2 32-bit: Properties for Device 1 Device ID: IDE\DiskMAXTOR_STM3160215AS_____________________3.AAD___ Adapter Properties ------------------ Bus Type : ATA Max. Tr. Length: 0x20000 Max. Phy. Pages: 0xffffffff Alignment Mask : 0x1 Device Properties ----------------- Device Type : Direct Access Device (0x0) Removable Media : No Product ID : MAXTOR STM3160215AS Product Revision: 3.AAD Inquiry Data from Pass Through ------------------------------ Device Type: Direct Access Device (0x0) Vendor ID : MAXTOR S Product ID : TM3160215AS Product Rev: 3.AA Vendor Str : *** End of Device List

  Read the article

• Establishing WebLogic Server HTTPS Trust of IIS Using a Microsoft Local Certificate Authority

  - by user647124

  Everyone agrees that self-signed and demo certificates for SSL and HTTPS should never be used in production and preferred not to be used elsewhere. Most self-signed and demo certificates are provided by vendors with the intention that they are used only to integrate within the same environment. In a vendor’s perfect world all application servers in a given enterprise are from the same vendor, which makes this lack of interoperability in a non-production environment an advantage. For us working in the real world, where not only do we not use a single vendor everywhere but have to make do with self-signed certificates for all but production, testing HTTPS between an IIS ASP.NET service provider and a WebLogic J2EE consumer application can be very frustrating to set up. It was for me, especially having found many blogs and discussion threads where various solutions were described but did not quite work and were all mostly similar but just a little bit different. To save both you and my future (who always seems to forget the hardest-won lessons) all of the pain and suffering, I am recording the steps that finally worked here for reference and sanity. How You Know You Need This The first cold clutches of dread that tells you it is going to be a long day is when you attempt to a WSDL published by IIS in WebLogic over HTTPS and you see the following: <Jul 30, 2012 2:51:31 PM EDT> <Warning> <Security> <BEA-090477> <Certificate chain received from myserver.mydomain.com - 10.555.55.123 was not trusted causing SSL handshake failure.> weblogic.wsee.wsdl.WsdlException: Failed to read wsdl file from url due to -- javax.net.ssl.SSLKeyException: [Security:090477]Certificate chain received from myserver02.mydomain.com - 10.555.55.123 was not trusted causing SSL handshake failure. The above is what started a three day sojourn into searching for a solution. Even people who had solved it before would tell me how they did, and then shrug when I demonstrated that the steps did not end in the success they claimed I would experience. Rather than torture you with the details of everything I did that did not work, here is what finally did work. Export the Certificates from IE First, take the offending WSDL URL and paste it into IE (if you have an internal Microsoft CA, you have IE, even if you don’t use it in favor of some other browser). To state the semi-obvious, if you received the error above there is a certificate configured for the IIS host of the service and the SSL port has been configured properly. Otherwise there would be a different error, usually about the site not found or connection failed. Once the WSDL loads, to the right of the address bar there will be a lock icon. Click the lock and then click View Certificates in the resulting dialog (if you do not have a lock icon but do have a Certificate Error message, see http://support.microsoft.com/kb/931850 for steps to install the certificate then you can continue from the point of finding the lock icon). Figure 1: View Certificates in IE Next, select the Details tab in the resulting dialog Figure 2: Use Certificate Details to Export Certificate Click Copy to File, then Next, then select the Base-64 encoded option for the format Figure 3: Select the Base-64 encoded option for the format For the sake of simplicity, I choose to save this to the root of the WebLogic domain. It will work from anywhere, but later you will need to type in the full path rather than just the certificate name if you save it elsewhere. Figure 4: Browse to Save Location Figure 5: Save the Certificate to the Domain Root for Convenience This is the point where I ran into some confusion. Some articles mentioned exporting the entire chain of certificates. This supposedly works for some types of certificates, or if you have a few other tools and the time to learn them. For the SSL experts out there, they already have these tools, know how to use them well, and should not be wasting their time reading this article meant for folks who just want to get things wired up and back to unit testing and development. For the rest of us, the easiest way to make sure things will work is to just export all the links in the chain individually and let WebLogic Server worry about re-assembling them into a chain (which it does quite nicely). While perhaps not the most elegant solution, the multi-step process is easy to repeat and uses only tools that are immediately available and require no learning curve. So… Next, go to Tools then Internet Options then the Content tab and click Certificates. Go to the Trust Root Certificate Authorities tab and find the certificate root for your Microsoft CA cert (look for the Issuer of the certificate you exported earlier). Figure 6: Trusted Root Certification Authorities Tab Export this one the same way as before, with a different name Figure 7: Use a Unique Name for Each Certificate Repeat this once more for the Intermediate Certificate tab. Import the Certificates to the WebLogic Domain Now, open an command prompt, navigate to [WEBLOGIC_DOMAIN_ROOT]\bin and execute setDomainEnv. You should then be in the root of the domain. If not, CD to the domain root. Assuming you saved the certificate in the domain root, execute the following: keytool -importcert -alias [ALIAS-1] -trustcacerts -file [FULL PATH TO .CER 1] -keystore truststore.jks -storepass [PASSWORD] An example with the variables filled in is: keytool -importcert -alias IIS-1 -trustcacerts -file microsftcert.cer -keystore truststore.jks -storepass password After several lines out output you will be prompted with: Trust this certificate? [no]: The correct answer is ‘yes’ (minus the quotes, of course). You’ll you know you were successful if the response is: Certificate was added to keystore If not, check your typing, as that is generally the source of an error at this point. Repeat this for all three of the certificates you exported, changing the [ALIAS-1] and [FULL PATH TO .CER 1] value each time. For example: keytool -importcert -alias IIS-1 -trustcacerts -file microsftcert.cer -keystore truststore.jks -storepass password keytool -importcert -alias IIS-2 -trustcacerts -file microsftcertRoot.cer -keystore truststore.jks -storepass password keytool -importcert -alias IIS-3 -trustcacerts -file microsftcertIntermediate.cer -keystore truststore.jks -storepass password In the above we created a new JKS key store. You can re-use an existing one by changing the name of the JKS file to one you already have and change the password to the one that matches that JKS file. For the DemoTrust.jks  that is included with WebLogic the password is DemoTrustKeyStorePassPhrase. An example here would be: keytool -importcert -alias IIS-1 -trustcacerts -file microsoft.cer -keystore DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase keytool -importcert -alias IIS-2 -trustcacerts -file microsoftRoot.cer -keystore DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase keytool -importcert -alias IIS-2 -trustcacerts -file microsoftInter.cer -keystore DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase Whichever keystore you use, you can check your work with: keytool -list -keystore truststore.jks -storepass password Where “truststore.jks” and “password” can be replaced appropriately if necessary. The output will look something like this: Figure 8: Output from keytool -list -keystore Update the WebLogic Keystore Configuration If you used an existing keystore rather than creating a new one, you can restart your WebLogic Server and skip the rest of this section. For those of us who created a new one because that is the instructions we found online… Next, we need to tell WebLogic to use the JKS file (truststore.jks) we just created. Log in to the WebLogic Server Administration Console and navigate to Servers > AdminServer > Configuration > Keystores. Scroll down to “Custom Trust Keystore:” and change the value to “truststore.jks” and the value of “Custom Trust Keystore Passphrase:” and “Confirm Custom Trust Keystore Passphrase:” to the password you used when earlier, then save your changes. You will get a nice message similar to the following: Figure 9: To Be Safe, Restart Anyways The “No restarts are necessary” is somewhat of an exaggeration. If you want to be able to use the keystore you may need restart the server(s). To save myself aggravation, I always do. Your mileage may vary. Conclusion That should get you there. If there are some erroneous steps included for your situation in particular, I will offer up a semi-apology as the process described above does not take long at all and if there is one step that could be dropped from it, is still much faster than trying to figure this out from other sources.

  Read the article

• New Features and Changes in OIM11gR2

  - by Abhishek Tripathi

  WEB CONSOLEs in OIM 11gR2 ** In 11gR1 there were 3 Admin Web Consoles : ·         Self Service Console ·         Administration Console and ·         Advanced Administration Console accessible Whereas in OIM 11gR2 , Self Service and Administration Console have are now combined and now called as Identity Self Service Console http://host:port/identity  This console has 3 features in it for managing self profile (My Profile), Managing Requests like requesting for App Instances and Approving requests (Requests) and General Administration tasks of creating/managing users, roles, organization, attestation etc (Administration) ** In OIM 11gR2 – new console sysadmin has been added Administrators which includes some of the design console functions apart from general administrations features. http://host:port/sysadmin   Application Instances Application instance is the object that is to be provisioned to a user. Application Instances are checked out in the catalog and user can request for application instances via catalog. ·         In OIM 11gR2 resources and entitlements are bundled in Application Instance which user can select and request from catalog.  ·         Application instance is a combination of IT Resource and RO. So, you cannot create another App Instance with the same RO & IT Resource if it already exists for some other App Instance. One of these ( RO or IT Resource) must have a different name. ·         If you want that users of a particular Organization should be able to request for an Application instances through catalog then App Instances must be attached to that particular Organization. ·         Application instance can be associated with multiple organizations. ·         An application instance can also have entitlements associated with it. Entitlement can include Roles/Groups or Responsibility. ·         Application Instance are published to the catalog by a scheduled task “Catalog Synchronization Job” ·         Application Instance can have child/ parent application instance where child application instance inherits all attributes of parent application instance. Important point to remember with Application Instance If you delete the application Instance in OIM 11gR2 and create a new one with the same name, OIM will not allow doing so. It throws error saying Application Instance already exists with same Resource Object and IT resource. This is because there is still some reference that is not removed in OIM for deleted application Instance.  So to completely delete your application Instance from OIM, you must: 1. Delete the app Instance from sysadmin console. 2. Run the App Instance Post Delete Processing Job in Revoke/Delete mode. 3. Run the Catalog Synchronization job. Once done, you should be able to create a new App instance with the previous RO & IT Resouce name.   Catalog  Catalog allows users to request Roles, Application Instance, and Entitlements in an Application. Catalog Items – Roles, Application Instance and Entitlements that can be requested via catalog are called as catalog items. Detailed Information ( attributes of Catalog item)  Category – Each catalog item is associated with one and only one category. Catalog Administrators can provide a value for catalog item. ·         Tags – are search keywords helpful in searching Catalog. When users search the Catalog, the search is performed against the tags. To define a tag, go to Catalog->Search the resource-> select the resource-> update the tag field with custom search keyword. Tags are of three types: a) Auto-generated Tags: The Catalog synchronization process auto-tags the Catalog Item using the Item Type, Item Name and Item Display Name b) User-defined Tags: User-defined Tags are additional keywords entered by the Catalog Administrator. c) Arbitrary Tags: While defining a metadata if user has marked that metadata as searchable, then that will also be part of tags.   Sandbox  Sanbox is a new feature introduced in OIM11gR2. This serves as a temporary development environment for UI customizations so that they don’t affect other users before they are published and linked to existing OIM UI. All UI customizations should be done inside a sandbox, this ensures that your changes/modifications don’t affect other users until you have finalized the changes and customization is complete. Once UI customization is completed, the Sandbox must be published for the customizations to be merged into existing UI and available to other users. Creating and activating a sandbox is mandatory for customizing the UI by .Without an active sandbox, OIM does not allow to customize any page. a)      Before you perform any activity in OIM (like Create/Modify Forms, Custom Attribute, creating application instances, adding roles/attributes to catalog) you must create a Sand Box and activate it. b)      One can create multiple sandboxes in OIM but only one sandbox can be active at any given time. c)      You can export/import the sandbox to move the changes from one environment to the other. Creating Sandbox To create sandbox, login to identity manager self service (/identity) or System Administration (/sysadmin) and click on top right of link “Sandboxes” and then click on Create SandBox. Publishing Sandbox Before you publish a sandbox, it is recommended to backup MDS. Use /EM to backup MDS by following the steps below : Creating MDS Backup 1.      Login to Oracle Enterprise Manager as the administrator. 2.      On the landing page, click oracle.iam.console.identity.self-service.ear(V2.0). 3.      From the Application Deployment menu at the top, select MDS configuration. 4.      Under Export, select the Export metadata documents to an archive on the machine where this web browser is running option, and then click Export. All the metadata is exported in a ZIP file.   Creating Password Policy through Admin Console : In 11gR1 and previous versions password policies could be created & applied via OIM Design Console only. From OIM11gR2 onwards, Password Policies can be created and assigned using Admin Console as well.  

  Read the article

• jPlayer widget created with static error as result

  - by goldengel

  I've created a widged with Orchard. Unfortunately I've used the same "Title" for a jPlayer widget twice. Now I receive an error: Server Error in '/wgk' Application. Sequence contains more than one element Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidOperationException: Sequence contains more than one element Source Error: Line 2: <fieldset> Line 3: <div>@Html.LabelFor(o => o.MediaGalleryName, @T("Media gallery"))</div> Line 4: @if(!Model.HasAvailableGalleries) { Line 5: <div>@T("You need first to create an media gallery on Media Gallery menu")</div> Line 6: } Source File: x:\Intepub\wgk\Modules\Orchard.jPlayer\Views\EditorTemplates\Parts\MediaGallery.cshtml Line: 4 Stack Trace: [InvalidOperationException: Sequence contains more than one element] System.Linq.Enumerable.SingleOrDefault(IEnumerable`1 source) +4206966 NHibernate.Linq.Visitors.ImmediateResultsVisitor`1.HandleSingleOrDefaultCall(MethodCallExpression call) +51 NHibernate.Linq.Visitors.ImmediateResultsVisitor`1.VisitMethodCall(MethodCallExpression call) +411 NHibernate.Linq.Visitors.ExpressionVisitor.Visit(Expression exp) +371 In MediaGallery.cshtml (found in error description above) is written: @model Orchard.jPlayer.Models.MediaGalleryPart <fieldset> <div>@Html.LabelFor(o => o.MediaGalleryName, @T("Media gallery"))</div> @if(!Model.HasAvailableGalleries) { <div>@T("You need first to create an media gallery on Media Gallery menu")</div> } else { <div>@Html.DropDownListFor(o => o.SelectedGallery, Model.AvailableGalleries)</div> <div>@Html.LabelFor(o => o.SelectedType, @T("Media gallery type"))</div> <div>@Html.DropDownListFor(o => o.SelectedType, Model.AvailableTypes)</div> <div>@Html.LabelFor(o => o.AutoPlay, @T("Auto play"))</div> <div>@Html.CheckBoxFor(o => o.AutoPlay)</div> } </fieldset> My problem is now, I cannot find or edit the widget with double used name. I would love to replace it to another name. But I do not know where to do this. Please advice.

  Read the article

• My listview is not gaining the keyboard focus in Qt

  - by Solitaire

  Hi, i am trying to operate the listview itesm through keyboard focus, its not moving.. can you folks suggest where i am wrong. if i click on the listview from mouse, listview is gaining the focus. i dont no what is wrong. #include <QtGui> #include <QApplication> class Newlist : public QListView { public: Newlist(QWidget *parent = 0); ~Newlist(){}; public: QListView *list; QStringListModel *model; }; Newlist::Newlist(QWidget *parent) : QListView(parent) { list = new QListView(this); list->setViewMode(QListView::ListMode); list->setSelectionMode(QAbstractItemView::SingleSelection); list->setMinimumSize(300,500); model = new QStringListModel(this); QStringList strlist; strlist<<"Test"<<"fest"<<"mest"; list->setModel(model); model->setStringList(strlist); QModelIndex index = model->index(1,0); list->setCurrentIndex(index); QVBoxLayout *layout = new QVBoxLayout(this); layout->addWidget(list); setLayout(layout); list->setFocus(); } class Test : public QMainWindow { public: Test(QWidget *parent = 0); ~Test(){}; private: Mylistview *newlist; QVBoxLayout *layout; }; Test::Test(QWidget *parent) : QMainWindow(parent) { layout = new QVBoxLayout(); newlist = new Mylistview(); this->setCentralWidget(newlist); } int main(int argc, char *argv[]) { QApplication a(argc, argv); Test test; test.showMaximized(); return a.exec(); } Thanks in advance

  Read the article

< Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >