Search Results

Search found 7165 results on 287 pages for 'regions dynamic regions'.

Page 179/287 | < Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >

• IIS not listening over external network, all other traffic working

  - by Beuy

  Hello there, I have a very odd situation, I have a server (let's call it X) running 2008 R2 with two NIC's in it, one is connected to the work domain and has a subnet of 192.168.10.0/24 the other is connected to a ADSL connection and has a subnet of 192.168.1.0/24. The server has IIS installed. On the ADSL connection I have setup a dynamic dns and port forwarding to allow external HTTP, HTTPS, FTP and RDP connections. FTP and RDP are working fine however neither HTTP or HTTPS are working at all. I can browse the websites by going to localhost on the machine, the HTTP and HTTPS ports appear as "Filtered" when I try to scan them using PortQueryUI and browsers respond with a "Server took too long to load or was not responding" error. This was working fine just a few days ago, Windows firewall is disabled I don't have any software firewall on it. And I'm really lost. Any help would be great.

  Read the article

• Web Server for SVN+PHP+Django+Rails

  - by NetStudent

  Foreword: I am not asking for the differences between Nginx and Apache, nor do I want to start a "which one is better discussion. I would like to ask for help with choosing the most adequate solution for this particular situation. I need to setup one or more l SVN repositories accessible via HTTP, plus some PHP, Django and Ruby websites. However, and since I only have 512Mb of RAM at my disposal, I fear that Apache will be a too heavy choice... On the other hand, I have heard that Nginx does not fully support SVN (WebDAV) and Django without reverse proxying to Apache. Is this still true? Should I go for Apache/Nginx alone? Or should I set up both and have Nginx handling static content and proxying to Apacge for dynamic content?

  Read the article

• A smarter way to do this jQuery?

  - by Nicky Christensen

  I have a a map on my site, and clicking regions a class should be toggled, on both hover and click, I've made a jQuery solution to do this, however, I think it can be done a bit smarter than i've done it? my HTML output is this: <div class="mapdk"> <a data-class="nordjylland" class="nordjylland" href="#"><span>Nordjylland</span></a> <a data-class="midtjylland" class="midtjylland" href="#"><span>Midtjylland</span></a> <a data-class="syddanmark" class="syddanmark" href="#"><span>Syddanmark</span></a> <a data-class="sjaelland" class="sjalland" href="#"><span>Sjælland</span></a> <a data-class="hovedstaden" class="hovedstaden" href="#"><span>Hovedstaden</span></a> </div> And my jQuery looks like: if ($jq(".area .mapdk").length) { $jq(".mapdk a.nordjylland").hover(function () { $jq(".mapdk").toggleClass("nordjylland"); }).click(function () { $jq(".mapdk").toggleClass("nordjylland"); }); $jq(".mapdk a.midtjylland").hover(function () { $jq(".mapdk").toggleClass("midtjylland"); }).click(function () { $jq(".mapdk").toggleClass("midtjylland"); }); } The thing is, that with what i've done, i have to make a hover and click function for every link i've got - I was thinking I might could keep it in one hover,click function, and then use something like $jq(this) ? But not sure how ?

  Read the article

• Ubuntu 12.04 VPS doesn't boot with mysql in nsswitch.conf

  - by chrisv

  1and1 VPS ("dynamic cloud server") does not boot any more as soon as mysql lookup is enabled in nsswitch.conf - any suggestions appreciated. Minimal setup to reproduce the problem: install Ubuntu 12.04 / LTS minimal server image install mysql-server, libnss-mysql-bg, nscd configure /etc/libnss-mysql.cfg and /etc/libnss-mysql-root.cfg set up appropriate database tables configure nss lookups through mysql in nsswitch.conf passwd: compat mysql group: compat mysql shadow: compat mysql Now, when I try to reboot the server it just hangs. No logs (maybe due to /var not yet being mounted), and I can't see console output (since this is a VPS). Booting into recovery image and removing "mysql" from /etc/nsswitch.conf makes the system bootable again, so this is definitely related to nsswitch/libnss-mysql-bg. There's a thread on gentoo-users which seems to describe a similar problem, unfortunately there's no real solution described, also the thread is rather old (from 2006) so I'm not sure whether this applies to me at all.

  Read the article

• "DNS not responding" error with D-Link router and PPTP internet connection

  - by Born2win

  I have a D-Link DIR-615 router since around six months. My internet connection is VPN (PPTP) based, i.e. I have been given a username and password from my ISP and my IP address is dynamic. Since a few days I am experiencing a serious problem. My router connects normally (I can see the yellow light), but my computer is giving me a "DNS not responding" error. I have tried everything (reset, reboot etc.) but no success.

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  Crossposted from here I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• Problems with Json Serialize Dictionary<Enum, Int32>

  - by dbemerlin

  Hi, whenever i try to serialize the dictionary i get the exception: System.ArgumentException: Type 'System.Collections.Generic.Dictionary`2[[Foo.DictionarySerializationTest+TestEnum, Foo, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null],[System.Int32, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]' is not supported for serialization/deserialization of a dictionary, keys must be strings or object My Testcase is: public class DictionarySerializationTest { private enum TestEnum { A, B, C } public void SerializationTest() { Dictionary<TestEnum, Int32> data = new Dictionary<TestEnum, Int32>(); data.Add(TestEnum.A, 1); data.Add(TestEnum.B, 2); data.Add(TestEnum.C, 3); JavaScriptSerializer serializer = new JavaScriptSerializer(); String result = serializer.Serialize(data); // Throws } public void SerializationStringTest() { Dictionary<String, Int32> data = new Dictionary<String, Int32>(); data.Add(TestEnum.A.ToString(), 1); data.Add(TestEnum.B.ToString(), 2); data.Add(TestEnum.C.ToString(), 3); JavaScriptSerializer serializer = new JavaScriptSerializer(); String result = serializer.Serialize(data); // Succeeds } } Of course i could use .ToString() whenever i enter something into the Dictionary but since it's used quite often in performance relevant methods i would prefer using the enum. My only solution is using .ToString() and converting before entering the performance critical regions but that is clumsy and i would have to change my code structure just to be able to serialize the data. Does anyone have an idea how i could serialize the dictionary as <Enum, Int32>? I use the System.Web.Script.Serialization.JavaScriptSerializer for serialization.

  Read the article

• Finding a private (NAT) host's IP using historic destination data

  - by l0c0b0x

  The issue: An unknown private (NAT) client is infected with malware and it's trying to access a Bot server at random times/dates. How we know about this: We receive bot traffic notices/alerts from REN-ISAC. Unfortunately, we don't receive those until the next day after it has happened. What they provide to us is: The source address (of the firewall) The destination addresses (it varies, but they're going to network subnet allocated to a German ISP) The source port (which varies--dynamic ports). Question: What would be the best approach to finding this internal host (historically) with a Cisco ASA as firewall? I'm guessing blocking anything to the destination address(es), and logging that type of traffic/access might allow me to find the source host, but I'm not sure which tool/command would be the most useful. I've seen Netflow thrown into a few responses when it comes to logging, but I'm confused with it's association of Logging, NAL, and nBAR, and how they relate to Netflow.

  Read the article

• Does SQLIO lie when run from a Hyper-V guest on a VHD?

  - by ScottStonehouse

  SQLIO seems like a useful tool. I thought it would be interesting to try to measure the speed difference between a physical disk and a VHD. So I ran SQLIO on the Hyper-V host on the physical drive. Results seemed reasonable. Then I ran it from the guest to test the vhd (on the same physical disk). I expected it to be a bit slower. But instead it was way faster - like 0ms average latency. So I'm trying to learn something here. It seems like hyper-v is fooling SQLIO somehow but I don't understand it well enough to figure it out. It's a dynamic vhd, no snapshots or anything, and the vhd is the only file on the disk. The physical disk is actually a two SAS drive RAID 1.

  Read the article

• How to create a chart from mysql data?

  - by user187580

  Hello, I have some data and want to create some dynamic charts. I have looked on Google visualisation api .. It looks great but the problem is I am not very familiar with it. Any ideas, how I can set the data.setValue from mysql data. <script type='text/javascript'> google.load('visualization', '1', {'packages': ['geomap']}); google.setOnLoadCallback(drawMap); function drawMap() { var data = new google.visualization.DataTable(); data.addRows(6); data.addColumn('string', 'Country'); data.addColumn('number', 'Popularity'); data.setValue(0, 0, 'Germany'); data.setValue(0, 1, 200); data.setValue(1, 0, 'United States'); data.setValue(1, 1, 300); data.setValue(2, 0, 'Brazil'); data.setValue(2, 1, 400); data.setValue(3, 0, 'Canada'); data.setValue(3, 1, 500); data.setValue(4, 0, 'France'); data.setValue(4, 1, 600); data.setValue(5, 0, 'RU'); data.setValue(5, 1, 700); var options = {}; options['dataMode'] = 'regions'; var container = document.getElementById('map_canvas'); var geomap = new google.visualization.GeoMap(container); geomap.draw(data, options); }; </script> I can create chart using some other methods but just interested in using Google Visualisation API. Thanks.

  Read the article

• Routing Essentials

  - by zharvey

  I'm a programmer trying to fill a big hole in my understanding of networking basics. I've been reading a good book (Networking Bible by Sosinki) but I have been finding that there is a lot of "assumed" information contained, where terms/concepts are thrown at the reader without a proper introduction to them. I understand that a "route" is a path through a network. But I am struggling with visualizing some routing-based concepts. Namely: How do routes actually manifest themselves in the hardware? Are they just a list of IP addresses that get computed at the network layer, and then executed by the transport? What kind of data exists in a so-caleld routing table? Is a routing-table just the mechanism for holding these lists of IP address (read above)? What are the performance pros/cons for having a static route, as opposed to a dynamic route?

  Read the article

• My D-Link Router is only allowing one connection

  - by Blaze

  My Router (Model: DI-624) is only allowing one wireless connection to one laptop. The other laptop is stuck hanging at connecting to the Internet I have the SSID set as "Pedro-Home" and is using a WPA PSK secured password. I have set the router using "Blaze-PC" while wired. Both Laptops critically need the Internet. > Dynamic DHCP Client List > > Host Name IP Address MAC > Address Expired Time > Blaze-PC 192.168.0.100 70-f1-a1-ff-39-a8 Apr/21/2011 17:49:14 > pedro 192.168.0.105 00-26-82-c8-47-25 Apr/21/2011 17:50:05 <<This computer isn't connecting.

  Read the article

• Word 2007 "Out of Memory or Disk Space" Error on launch.

  - by Adam

  Word 2007 is installed on a Vista Home Premium machine and whenever it starts up it opens what appears to be a dynamic installer to do something and then throws up the "Out of Memory or Disk Space" error. Word 2007 never completes starting up. Reinstalling Word hasn't helped and if I can avoid reinstalling Windows until Windows 7 is released and get Word working in the mean time, that would be ideal. I've been looking around for a solution, once of which seemed to point to a problem with the user account. I created a second user on the machine and Word still had the same problem. The other solution that seems possible is a corrupted normal.dot/normal.dotm file. However, even in the location it should be, I can't seem to find it. Am I going in the right direction with this? Is there another solution I haven't come across that will fix this? If it is possible that renaming normal.dot/normal.dotm how can I find it?

  Read the article

• win2008 R2 server core software RAID

  - by shimonyk

  I am trying to set up software raid on a win2008 R2 server core. I have the disks configured as dynamic. In the server manager gui, i can see the disks, but when i right click, the option to set up "new mirrored volume" is not listed. I tried it with the command line using diskpart, and it gives the error "Virtual Disk Service Error: The size of the extent is less than the minimum." The drive are a new pair of 1Tb disks. Is this not supported in server core, or am i missing something else? Thank you

  Read the article

• Getting zeros between data while reading a binary file in C

  - by indiajoe

  I have a binary data which I am reading into an array of long integers using a C programme. hexdump of the binary data shows, that after first few data points , it starts again at a location 20000 hexa adresses away. hexdump output is as shown below. 0000000 0000 0000 0000 0000 0000 0000 0000 0000 * 0020000 0000 0000 0053 0000 0064 0000 006b 0000 0020010 0066 0000 0068 0000 0066 0000 005d 0000 0020020 0087 0000 0059 0000 0062 0000 0066 0000 ........ and so on... But when I read it into an array 'data' of long integers. by the typical fread command fread(data,sizeof(*data),filelength/sizeof(*data),fd); It is filling up with all zeros in my data array till it reaches the 20000 location. After that it reads in data correctly. Why is it reading regions where my file is not there? Or how will I make it read only my file, not anything inbetween which are not in file? I know it looks like a trivial problem, but I cannot figure it out even after googling one night.. Can anyone suggest me where I am doing it wrong? Other Info : I am working on a gnu/linux machine. (slax-atma distro to be specific) My C compiler is gcc.

  Read the article

• apache requests failing

  - by Josh

  I'm trying to figure out why sometimes the client fails to load objects/requests from a dynamic page served from Apache/MySql/Debian machine. Let's say 13 objects are to be loaded for a total of 185.3 KB load, with no external objects (no DNS lookups) and no other traffic at the same time, randomly some of those object do not load. However, if I perform a refresh, sometimes all of them load or some might fail again. I only have 1Mbps/up and my DNS is been hosted externally (everydns). What could be the reason of this issue? Any comments will be appreciated.

  Read the article

• Can you open a form or window in an Outlook Addin (VSTO)

  - by dontpanic

  Hi, I am new to VSTO programming. I have created a basic addin for Outlook 2007 that monitors a folder containing XML text files which it opens and then sends them as an email, then deletes them. this all works fine. I want the user to be able to configure certain settings for the way the addin/program will operate, such as the folder that it will monitor, and other things. The logical way to do this is to create a menu item in the addin (which I have also done) that opens a windows form (or XAML window) that allows them to enter the parameters. In my addin I added a new item Windows Form, which worked, and the designer opened. However, in my addin code I cannot open the form. The Show() method normally associated with form objects is not available. Is this simply something you cannot do, or am I just doing it the wrong way? I have read about Outlook form regions, but these seemed to be attached to outlook items such as a new email, task, appointment etc... there doesnt seem to be a way to create a form region that can be opened in the main window of Outlook. Ideally, I would like to go with my original method of opening a new window from a menu item, but if this isnt possible I would like to hear other solutions. Thanks, Will.

  Read the article

• Dell Powervault MD3000 - Not sharing Files between servers

  - by Kevin

  I'm a developer who has to set up a Dell Powervault MD3000 due to lack of resources. I have connected the Powervault to 2 Dell 2950 servers via the SAS cables. I performed the setup using Dell's MD Storage Manager software (4 disks, RAID 5 with hot spare). Then I added the disks using Windows 2003 disk management (Basic, not dynamic disk and formatted with NTFS). When I add files to the array from one server, they are not visible on the other server (and vice-versa). Is the error in the windows disk management configuration?

  Read the article

• How do you configure ISC Bind to support GSS-TSIG Updates?

  - by netlinxman

  First, has anyone EVER configured ISC bind 9.5.0 OR greater with support for GSS-TSIG Dynamic DNS Updates AND gotten it to work? If so, what is the configuration that was used to make that happen? I feel close to having this working. I see that GSS cred passes w/o apparent error during the TKEY negotiation with an Active Directory DC and the BIND DNS server: client 192.168.0.30#52314: query gss cred: "DNS/[email protected]", GSS_C_ACCEPT, 4294967256 gss-api source name (accept) is [email protected] process_gsstkey(): dns_tsigerror_noerror client 192.168.0.30#52314: send But, when the Update is sent, it is refused: client 192.168.0.30#58330: update client 192.168.0.30#58330: updating zone 'example.com/IN': update failed: rejected by secure update (REFUSED) client 192.168.0.30#58330: send Does anyone have this working in the real world?

  Read the article

• How do i mitigate DDOS attacks on static servers?

  - by acidzombie24

  Here is a slightly different take on DDOS attacks. Rather than a server with dynamic content being attack i was curious how to deal with attacks on servers with STATIC CONTENT. This means cpu tends to not be an issue. Its either bandwidth or connection problems. How would i mitigate a DDOS attack knowing nothing about the attacker (for example country, ip address or anything else). I was wondering is shorting the timeout and increasing amount of connections is an acceptable solution? Or maybe that is completely useless? Also i would limit the amount of connections per IP address. Would the above help or be pointless? Keeping in mind everything is static checking for multiple request of the same page (html, css, js, etc) could be a sign of a attack. What are some measures i can take on a static content server?

  Read the article

• Excel - add target line to stacked bar chart

  - by Chris W

  I've got a stacked bar chart. I'm displaying a set of floating bars to represent hi/low ranges for some metrics, by using a transparent fill on the bottom section of the bar I achieve the desired look. What I now need to do is add a horizontal line across the chart to indicate how a particular users score relates to all of these hi/low ranges therefore the placement of this line needs to be dynamic based on a value in a cell. Is there anyway to do this as I can't find an easy option. If this was a simple bar chart I could add the target scores as new series and use the line chart type but I don't seem able to overlay a second series on the stacked bar chart. I'm using 2003 at the moment but run this in 2007 if that helps.

  Read the article

• Installing Wordpress - constant PHP/MySQL extension appears missing

  - by Driss Zouak

  I've got Win2003 w/IIS6, PHP 5 and MySQL installed. I can confirm PHP is installed correctly because I have a testMe.php that runs properly. When I run the Wordpress setup, I get informed that Your PHP installation appears to be missing the MySQL extension which is required by WordPress. But in my PHP.ini in the DYNAMIC EXTENSIONS section I have extension=php_mysql.dll extension=php_mysqli.dll I verified that mysql.dll and libmysql.dll are both in my PHP directory. I copied my libmysql.dll to the C:\Windows\System32 directory. When I try to run the initial setup for WordPress, I get this answer. I've Googled setting this up, and everything comes down to the above. I'm missing something, but none of the instructions that I've found online seem to cover whatever that is.

  Read the article

• Get subdomain of XML page from XSL

  - by fudgey

  I am working with a guild hosting site that provides an XML/XSL transformation widget where all I need to do is enter the URL for the XML and XSL and it does the rest. I have written an XSL transform to display a World of Warcraft armory page: Here is an example XML page (view source to see it) of the group I'm trying to help now. So, the user is entering their own XML page url (which has an eu subdomain in this case, but it is not within the XML itself). So when I make links to the character url, I need to add the entire url <a target="_blank" href="http://eu.wowarmory.com/character-sheet.xml?{@url}"> <xsl:value-of select="@name"/> </a> But I can't just set the domain to eu since there are multiple regions. Here are the possibilities: us = www, europe = eu, korea = kr, china = cn and taiwan = tw. Here is a snippet of the XML which shows the url parameters: <character achPoints="4275" classId="3" genderId="0" level="80" name="Virtex" raceId="4" rank="2" url="r=Drek%27Thar&amp;cn=Virtex"/> I guess I could just have the user add a small bit of HTML with their region in another part of their page, something like <div id="region">eu</div>, but I'm trying to make this work without any extra coding on their part. Edit: Ok, my question explicitly stated: How do I get the URL subdomain using XSL?

  Read the article

• DNS not responding

  - by Born2win

  I have a Dlink DIR-615 router and I have it around six mounths. My internet connection is VPN (PPTP) based i.e. I have been give a username and password from my isp and my ip address is dynamic. But from few days I am experiencing a serious problem. My router connects normally (i can see yellow light) but my computer is giving "DNS not responding" error. I have tried everything (reset,reboot etc) but no sucess. Any help would be appreciated :)

  Read the article

< Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >