Search Results

Search found 21955 results on 879 pages for 'self host'.

Page 179/879 | < Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >

• Win7 VM @ ESXi Server @ VMWorkstation (Win7) - ping works only from VM -> HostOS, not vice versa

  - by DK2000

  right now I'm toying around with VM Ware stuff and not having any pcs then my laptop I decided to run an ESXi Server inside of VWmware Workstation. I was just curios to see if the server would allow to setup and run a VM. And after some tweaking there it was, working like a charm. Okay not that fast but startin' the VM from vSphere and "opening a console" gave my direct access to that VM. Now I wanted to see if I could ping the host from the VM (VM Workstation Network is set to "host only"). And it worked, at least from the VM I could ping the ESXi server and the host. From the host I am able to ping the ESXi Server but I can't ping the VM! I asked myself anyway where the VM got its ip adress from. At the DCHPs IP there is at no machine after all. I even tried to use that DHCP adress for my Host and it didn't work out. You can see my settings from the screenshot here (it's pretty wide so just a link): http://yfrog.com/n4desktopfeop The only thing that got me thinking was when I once changed the ESXi's IP from 192.168.92.137 to 192.168.0.137. I still was able to connect to the ESXi server via its new IP but when I tried to run the VM console from vSphere I got an error after a while that said "couldnt connect to 192.168.92.137:903". So vSphere connects just through a port of the ESXi server to the VM?!? Could I setup a Linux VM to use it as a DHCP that I'd at least have control over the IPs that are given. Which lowest end linux could be used for this purpose?!? Thank you for your time! :)

  Read the article

• Change sysout logging level for Weblogic

  - by Justin Voss

  When I run a local copy of Weblogic, I like to see the output in the console so that I can observe my app's logging messages. But, Weblogic spits out a lot of log messages I don't care about, like these: [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Getting a JNDI connection [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Connection Returned. Elapsed time to acquire=0ms. [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Getting a JNDI connection [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Connection Returned. Elapsed time to acquire=0ms. Can I configure Weblogic to not output those? I assume that I can change the logging level to something higher than INFO and that should fix it?

  Read the article

• nginx : backend https, proxy_pass shows ip

  - by Vulpo

  I am using nginx as a reverse proxy listening at port 80 (http). I am using proxy_pass to forward requests to backend http and https servers. Everything works fine for my http server but when I try to reach the https server through nginx reverse proxy the ip of the https server is shown in the client's web browser. I want the uri of the nginx server to be shown instead of the https backend server's ip (once again, this works fine with the http server but not for the https server). See this post on the forum Here is my configuration file : server { listen 80; server_name domain1.com; access_log off; root /var/www; if ($request_method !~ ^(GET|HEAD|POST)$ ) { return 444; } location / { proxy_pass http://ipOfHttpServer:port/; } } server { listen 80; server_name domain2.com; access_log off; root /var/www; if ($request_method !~ ^(GET|HEAD|POST)$ ) { return 444; } location / { proxy_pass http://ipOfHttpsServer:port/; proxy_set_header X_FORWARDED_PROTO https; #proxy_set_header Host $http_host; } } When I try the "proxy_set_header Host $http_host" directive and "proxy_set_header Host $host" the web page can't be reached (page not found). But when I comment it, the ip of the https server is shown in the browser (which is bad). Does anyone have an idea ? My other configs files are : proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; #proxy_hide_header X-Powered-By; proxy_intercept_errors on; proxy_buffering on; proxy_cache_key "$scheme://$host$request_uri"; proxy_cache_path /var/cache/nginx levels=1:2 keys_zone=cache:10m inactive=7d max_size=700m; user www-data; worker_processes 2; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; access_log /var/log/nginx/access.log; server_names_hash_bucket_size 64; sendfile off; tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_comp_level 5; gzip_http_version 1.0; gzip_min_length 0; gzip_types text/plain text/html text/css image/x-icon application/x-javascript; gzip_vary on; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } Thanks for your help !

  Read the article

• Python module: Trouble Installing Bitarray 0.8.0 on Mac OSX 10.7.4

  - by Gabriele

  I'm new here! I have trouble installing bitarray (vers 0.8.0) on my Mac OSX 10.7.4. Thanks! ('gcc' does not seem to be the problem) Last login: Sun Sep 9 22:24:25 on ttys000 host-001:~ gabriele$ gcc -version i686-apple-darwin11-llvm-gcc-4.2: no input files host-001:~ gabriele$ Last login: Sun Sep 9 22:18:41 on ttys000 host-001:~ gabriele$ cd /Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/bitarray-0.8.0/ host-001:bitarray-0.8.0 gabriele$ python2.7 setup.py installrunning install running bdist_egg running egg_info creating bitarray.egg-info writing bitarray.egg-info/PKG-INFO writing top-level names to bitarray.egg-info/top_level.txt writing dependency_links to bitarray.egg-info/dependency_links.txt writing manifest file 'bitarray.egg-info/SOURCES.txt' reading manifest file 'bitarray.egg-info/SOURCES.txt' writing manifest file 'bitarray.egg-info/SOURCES.txt' installing library code to build/bdist.macosx-10.6-intel/egg running install_lib running build_py creating build creating build/lib.macosx-10.6-intel-2.7 creating build/lib.macosx-10.6-intel-2.7/bitarray copying bitarray/__init__.py -> build/lib.macosx-10.6-intel-2.7/bitarray copying bitarray/test_bitarray.py -> build/lib.macosx-10.6-intel-2.7/bitarray running build_ext building 'bitarray._bitarray' extension creating build/temp.macosx-10.6-intel-2.7 creating build/temp.macosx-10.6-intel-2.7/bitarray gcc-4.2 -fno-strict-aliasing -fno-common -dynamic -isysroot /Developer/SDKs/MacOSX10.6.sdk -arch i386 -arch x86_64 -g -O2 -DNDEBUG -g -O3 -I/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7 -c bitarray/_bitarray.c -o build/temp.macosx-10.6-intel-2.7/bitarray/_bitarray.o unable to execute gcc-4.2: No such file or directory error: command 'gcc-4.2' failed with exit status 1 host-001:bitarray-0.8.0 gabriele$

  Read the article

• download/export emails from webmail

  - by misterjinx

  hello, I'm just switching my hosts and I want to move the emails from my accounts too. In order to have my current emails on the new host I want to download/export them and to import at the other host. In order to do this I use one of the webmail (squirrelmail, roundcube, horde) clients available on my current host. The problem is that except for roundcube, I don't see any download/export option available. And in roundcube I can only select one email at a time and download it as eml. My question is how do I export/download all the emails from one account and import them at the new host? I know this is possible because I remember doing this some time ago using squirrelmail, but I can't find anything related to this now. Thank you.

  Read the article

• iptables NAT configuration

  - by Sarp Kaya

  Hello I am experiencing some issues with my iptables. Here's what I want to do: A(eth0)--------(eth0)B(eth2)---------------(eth2)C Brackets are interface names A,B and C are hosts. Now I would like to forward port number 80 of host C so that It would be accessed via host A. host A is 192.168.1.254 host C is 192.168.3.2 I intentionally ACCEPTed all FILTER chain options as the default policy because I wanted to make sure that NAT is working properly first. I enabled ip_forward. So here's what I have done: sudo iptables -A PREROUTING -t nat -p tcp - d 192.168.1.254 -j DNAT --to 192.168.3.2 However it is not working. What am I missing here?

  Read the article

• how to? 1 domain name, 1 ISP Static IP, 1 router, 3 physical web Servers

  - by buliwyf

  I have 1 Static IP from my ISP, 58.59.60.61 I have 3 local physical web servers: Win2008 IIS 7, local IP 192.168.10.11, mydomain.com Ubuntu Apache2, local IP 192.168.10.12, subdomain1.mydomain.com Win2003 IIS 6, local IP 192.168.10.13, subdomain2.mydomain.com I have 1 domain name, mydomain.com. It is configured this way: Host(A), @, 58.59.60.61 Host(A), subdomain1, 58.59.60.61 Host(A), subdomain2, 58.59.60.61 My router is a pfSense box. It forwards all port 80 traffic to a group alias called "WebServers," which is my 3 web server IP's. This setup should work right? I believe I need to set the "host header names" in my web servers. In IIS I know how to do this. How do I do this in Apache2?

  Read the article

• error: unexplained error (code 130) at rsync.c(541) [sender=3.0.7]

  - by brazorf

  This error: unexplained error (code 130) at rsync.c(541) [sender=3.0.7] error is happening after i changed router. Actually, i found out that this error just happens on a ctrl+c signal, so it could be not representative about the error itself. The command i run is very basic: rsync -avz --delete /local/path/ username@host:/path/to/remote/directory Basically, the rsync just stuck there and nothing's happening, until i ctrl+c. After interrupting the process i got the error in subject. I past the whole thing here: rsync -avvvvz --delete /source/path/ username@host:/path/to/direectory cmd=<NULL> machine=HOSTNAME user=username path=/path/to/direectory cmd[0]=ssh cmd[1]=-l cmd[2]=username cmd[3]=HOSTNAME cmd[4]=rsync cmd[5]=--server cmd[6]=-vvvvlogDtprze.iLsf cmd[7]=--delete cmd[8]=. cmd[9]=/path/to/direectory opening connection using: ssh -l username HOSTNAME rsync --server -vvvvlogDtprze.iLsf --delete . /path/to/direectory note: iconv_open("UTF-8", "UTF-8") succeeded. ^C[sender] _exit_cleanup(code=20, file=rsync.c, line=541): entered rsync error: unexplained error (code 130) at rsync.c(541) [sender=3.0.7] [sender] _exit_cleanup(code=20, file=rsync.c, line=541): about to call exit(130) The authentication runs on ssh via rsa key. I tried basic troubleshoot such as: ping the remote host ssh -l username remote.host check software firewall logs i asked the remote host sysadmin to check for logs, and when i run that command a ssh connection is actually being established and i can state there is no comunication/authentication/name resolution issue here. Rolling back to old router make this work again. Both client and server are running ubuntu 10.04. Try to take a look at my router configuration, where i'm no experienced at all, but i didnt see any "suspect" (what i was looking for is firewall blocking something) setting. The router itself is DLINK DVA-G3670B. Any suggestion? Thank You F.

  Read the article

• How can I map my server's IP address to my domain?

  - by samoz

  I rented some server space from a new host and have a static IP address and a domain name that I previously purchased, but I do not know how to register the domain name to point to my server. My previous host did this for me, but my new host only offers hardware, i.e. they won't do it for me. How can I register a domain name I own to point to my server's IP address?

  Read the article

• Apache Probes -- what are they after?

  - by Chris_K

  The past few weeks I've been seeing more and more of these probes each day. I'd like to figure out what vulnerability they're looking for but haven't been able to turn anything up with a web search. Here's a sample of what I get in my morning Logwatch emails: A total of XX possible successful probes were detected (the following URLs contain strings that match one or more of a listing of strings that indicate a possible exploit): /MyBlog/?option=com_myblog&Itemid=12&task=../../../../../../../../../../../../../../../proc/self/environ%00 HTTP Response 200 /index2.php?option=com_myblog&item=12&task=../../../../../../../../../../../../../../../../proc/self/environ%00 HTTP Response 200 /?option=com_myblog&Itemid=12&task=../../../../../../../../../../../../../../../proc/self/environ%00 HTTP Response 301 /index2.php?option=com_myblog&item=12&task=../../../../../../../../../../../../../../../proc/self/environ%00 HTTP Response 200 //index2.php?option=com_myblog&Itemid=1&task=../../../../../../../../../../../../../../../proc/self/environ%00 HTTP Response 200 This is coming from a current CentOS 5.4 / Apache 2 box with all updates. I've manually tried entering a few in to see what they get, but those all appear to just return the site's home page. This server is just hosting a few Joomla! sites... but this doesn't seem to be targeting Joomla (as far as I can tell). Anyone know what they're probing for? I just want to make sure whatever it is I've got it covered (or not installed). The escalation of these entries has me a bit concerned.

  Read the article

• Windows Server 2012 Hyper-V very slow

  - by Matt Taylor

  I have been running several Hyper-V VMs on Windows Server 2008 R2 for the past couple of years and enjoying perfectly adequate performance for my testing/development/r&d environments. I'm a software developer so my hardware knowledge is basic however I built the rig using: •Gigabyte GA-X58A-UD3R Intel X58 (Socket 1366) DDR3 Motherboard •Intel Core i7 960 3.20GHz (Bloomfield) (Socket LGA1366) •24GB triple channel RAM The host OS is running on an OCZ SSD and all the VMs are running on a 2TB Marvell SATA3 RAID 0 array consisting of 2 Western Digital Caviar Black 7,200rpm drives. I have tested the speed of the 2TB drive and appear to be getting less than 3Mbs but it can adequately run a 4 VM farm including a DC, (SQL) database and IIS application servers. I recently upgraded the SSD on which the host runs to a 256GB OCZ Vertex 4 and took the opportunity to upgrade to Windows Server 2012 and installed the Hyper-V role. I tried importing one of my existing Windows Server 2008 R2 VMs (and converted it to .vhdx) plus I have tried creating a brand new Windows Server 2008 R2 VM but both are running extremely slowly and I can see nothing obvious using the host and guest Task Manager/Resource Monitor tools. In both cases the VM has 8GB RAM (fixed), 4 CPUs, fixed size HD (not expanding) and is using an external virtual network running on a separate NIC to the host. I have upgraded the BIOS to the latest available version and checked the virtualization settings. I have run out of "obvious" (to a developer) things to check/configure and my next option will be to re-install the host OS but before I do I would very much appreciate any advice from any experts out there. Thanks

  Read the article

• Setting a Static IP Running FreeBSD8 in VirtualBox hosted on Windows 7

  - by gvkv

  I'm using VirtualBox on Windows 7 (host) to run a FreeBSD (guest) based web server. I`ve assigned a static ip of 192.168.80. 1 to the (virtualized) NIC which is run in bridged mode. The problem is that when I ping an external server (such as google.com) I get a No route to host error: dimetro# ping google.com PING google.com (66.249.90.104): 56 data bytes ping: sendto: No route to host ... I can ping the BSD server from both another virtualized machine and my host machine and from the server, I can ping everything on the network. The router ip is 192.168.1.1/16. ADDENDUM: I have the following lines in /etc/rc.conf on the BSD VM to configure networking: defaultrouter="192.168.1.1" ifconfig_em0="inet 192.168.80.1 netmask 255.255.0.0"

  Read the article

• Transferring domain from one registrar to another

  - by Macha

  I have a domain from my old web host, which was free with my hosting account. After a few years, I am moving to a VPS. Most of my other domains were registered with Namecheap, so it was just a matter of changing a few DNS records. However, given that my old host does not provide me with a DNS control panel, and I don't want to be paying a full hosting bill for just domains, I'm now looking into transferring it. My old host says there will be a charge of $15 to them. NameCheap's page seems to imply you don't need the current registrar to do anything, but it also seems to be based on sending an email to the one listed in whois. Of course, my old host have whoisguard on the domain so the only email on it is [email protected] (and not a unique [email protected], just [email protected]) which doesn't go to me. Again, there doesn't seem to be an option to disable this. So, is it a case of paying my old host's fee, and paying again for the domain from NameCheap, or is there some other way to transfer my domain? (I'm not really sure which of the trilogy sites this is best for.)

  Read the article

• Using wget to recursively download whole FTP directories

  - by user9406

  I want to copy all of the files and folders from one host to another. The files on the old host sit at /var/www/html and I only have FTP access to that server, and I can't TAR all the files. Regular connection to the old host through FTP brings me to the /home/admin folder. I tried running the following command form my new server: wget -r ftp://username:[email protected].host But all I get is a made up index.html file. What the right syntax for using wget recursively over FTP?

  Read the article

• ubuntu 10.04 + php + postfix

  - by mononym

  I have a server I am running: Ubuntu 10.04 php 5.3.5 (fpm) Nginx I have installed postfix, and set it to loopback-only (only need to send) The problem is it is not sending. if i issue (at command line): echo "testing local delivery" | mail -s "test email to localhost" [email protected] I get the email no problem, but through PHP it does not arrive. When I send it via PHP, mail.log shows: Mar 28 10:15:04 host postfix/pickup[32102]: 435EF580D7: uid=0 from=<root> Mar 28 10:15:04 host postfix/cleanup[32229]: 435EF580D7: message-id=<20120328091504.435EF580D7@FQDN> Mar 28 10:15:04 host postfix/qmgr[32103]: 435EF580D7: from=<root@FQDN>, size=1127, nrcpt=1 (queue active) Mar 28 10:15:04 host postfix/local[32230]: 435EF580D7: to=<root@FQDN>, orig_to=<root>, relay=local, delay=3.1, delays=3/0.01/0/0.09, dsn=2.0.0, status=sent (delivered to maildir) Mar 28 10:15:04 host postfix/qmgr[32103]: 435EF580D7: removed any help appreciated, my main.cf file: smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = FQDN alias_maps = hash:/etc/aliasesalias_database = hash:/etc/aliases myorigin = /etc/mailname #myorigin = $mydomain mydestination = FQDN, localhost.FQDN, , localhost relayhost = $mydomain mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = loopback-only virtual_alias_maps = hash:/etc/postfix/virtual home_mailbox = mail/

  Read the article

• How to test a HTTPS URL with a given IP address

  - by GreatFire

  Let's say a website is load-balanced between several servers. I want to run a command to test whether it's working, such as curl DOMAIN.TLD. So, to isolate each IP address, I specify the IP manually. But many websites may be hosted on the server, so I still provide a host header, like this: curl IP_ADDRESS -H 'Host: DOMAIN.TLD'. In my understanding, these two commands create the exact same HTTP request. The only difference is that in the latter one I take out the DNS lookup part from cURL and do this manually (please correct me if I'm wrong). All well so far. But now I want to do the same for an HTTPS url. Again, I could test it like this curl https://DOMAIN.TLD. But I want to specify the IP manually, so I run curl https://IP_ADDRESS -H 'Host: DOMAIN.TLD'. Now I get a cURL error: curl: (51) SSL: certificate subject name 'DOMAIN.TLD' does not match target host name 'IP_ADDRESS'. I can of course get around this by telling cURL not to care about the certificate (the "-k" option) but it's not ideal. Is there a way to isolate the IP address being connected to from the host being certified by SSL?

  Read the article

• Import Firefox passwords into KeePassX or KeePass2

  - by rubo77

  I have an XML export of my Firefox Passwords in the form (I replaced real passwords with *): <xml> <entries ext="Password Exporter" extxmlversion="1.1" type="saved" encrypt="false"> <entry host="chrome://weave" user="****" password="****" formSubmitURL="" httpRealm="Mozilla Services Password" userFieldName="" passFieldName=""/> <entry host="chrome://weave" user="****" password="****" formSubmitURL="" httpRealm="Mozilla Services Encryption Passphrase" userFieldName="" passFieldName=""/> <entry host="http://www.example.de" user="rubo77" password="****" formSubmitURL="http://www.example.de" httpRealm="" userFieldName="benutzername" passFieldName="passwort"/> <entry host="http://example2.de" user="qqq" password="pppp" formSubmitURL="http://example2.de" httpRealm="" userFieldName="username" passFieldName="pass"/> ... Can I somehow convert this into a form KeePassX understands?

  Read the article

• How can I map my server's domain to my IP address?

  - by samoz

  I rented some server space from a new host and have a static IP address and a domain name that I previously purchased, but I do not know how to register the domain name to point to my server. My previous host did this for me, but my new host only offers hardware, i.e. they won't do it for me. How can I register a domain name I own to point to my server's IP address?

  Read the article

• Reverse proxy using hop and RDP

  - by Sergei

  I am trying to connect from Vista to XP using RDP via reverse proxy using putty and an intermidiate host. There are myriad articles on the internet how to do it using vnc, ssh servers, winsshd, etc, but I can't find anything that helps me in this specific case. What I have: Windows XP host behind the firewall - 'destination' linux host running ssh on the internet - 'intermediate' windows host behind the firewall - 'source' All I want to do is open reverse tunnel from destination to intermidiate and use this tunnel for connecting back from the source. That should be simple to setup, however I just cannot make it. This is what I do: On 'destination', open putty session, create tunnel to 'intermediate' using following settings: source port 3389, destination is 'source:33389', direction is local On 'source', open putty session, create tunnel to 'intermediate'using following settings: source port 33389, destination is 'destination:33389', direction is local Finally, on source, open termnal services client and connect it to localhost:33389.Unfortunately it seems like packets do go somewhere but eventually client times out. Am I totally misunderstanding the concept? Please help!

  Read the article

• How to configure nagios realtime SMS alert

  - by Jerry

  I have configured nagios SMS alert and it takes around one minute to send notification. I want to get SMS notification withing one/two second(s) after system/service failure. I could not find any way to send sms alert in a second. Can anybody help me??? Update Wednesday, 29 August 9:26:43 a.m GMT define host{ use generic-host ; Name of host template to use host_name localhost alias localhost address x.x.x.187 check_command check-host-alive normal_check_interval 1 max_check_attempts 1 retry_interval 1 notification_interval 120 notification_period 24x7 notification_options d,r contact_groups admins }

  Read the article

• Nginx: Forward all Subdomains

  - by mgutt

  My code doesn't work with second level tld's like domain.co.uk The strainge thing is, that it works in php with preg_match() ^^ Here is my conf: # add www. if ($host ~ ^(?!www)) { rewrite ^/(.*)$ http://www.$host/$1 permanent; } # remove subdomain if ($host ~ "^www\.(.*)\.(.*\.([a-z]{2,4}|[a-z]{2}\.[a-z]{2}))") { set $host_without_sub $2; rewrite ^/(.*)$ http://www.$host_without_sub/$1 permanent; }

  Read the article

• how can i cahe one more web site on same backend server (web server) with varnish?

  - by Kerberos

  i have one web server which is IIS that is back on varnish. there are more web sites on ISS. there are all web sites header's on IIS and all web sites publish from port 80. can i cache all web site by varnish like below code;backend cacheWebSite{.host = "192.168.0.1"; .port = "80";} sub vcl_recv {if (req.http.host == "www.example1.com") {set req.backend = CacheWebSites;} if (req.http.host == "www.example2.com") {set req.backend = CacheWebSites; } if (req.http.host == "www.example3.com") {set req.backend = CacheWebSites; }} i can't test this code. that is just senario. thank you for your help already now.

  Read the article

• unable to access a NAT'ed IP via a VPN on Windows 7

  - by crmpicco

  I connect to a range of servers hosted by one provider via a VPN. I can connect to the VPN fine, however when I then go and try and connect to the server(s) it fails. A NAT'ed IP address that has worked up until today, has stopped working either via SSH/SFTP. As you can see below, if I try and ping the IP then it responds with Destination host unreachable, but, for some reason it says the reply is from 192.168.0.8? If it enter this IP address in my browser, I get nothing. Where is this IP coming from and is there any good reason why I cannot access the IP I am trying to ping? C:\Users\crmpicco>ping 172.26.100.x Pinging 172.26.100.x with 32 bytes of data: Reply from 192.168.0.8: Destination host unreachable. Reply from 192.168.0.8: Destination host unreachable. Reply from 192.168.0.8: Destination host unreachable. Reply from 192.168.0.8: Destination host unreachable. Ping statistics for 172.26.100.x: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), I have the VPN remote host address of 80.75.67.x, which shows me as being connected. But i'm unsure if there is a config issue at the server side or my end that has caused this issue? I have had some recent Win7 (automatic) updates, but it's hard to tell if that's caused this problem. This is my output from arp: C:\Users\cmorton>arp -a Interface: 192.168.0.8 --- 0xe Internet Address Physical Address Type 192.168.0.1 00-18-4d-b9-68-5e dynami 192.168.0.6 00-f4-b9-68-0c-9a dynami 192.168.0.7 08-00-27-f2-9f-d6 dynami 192.168.0.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.251 01-00-5e-00-00-fb static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Interface: 192.168.56.1 --- 0x15 Internet Address Physical Address Type 192.168.56.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.251 01-00-5e-00-00-fb static 224.0.0.252 01-00-5e-00-00-fc static 255.255.255.255 ff-ff-ff-ff-ff-ff static

  Read the article

• Use windows 7 inside virtual box,as guest i mean, to create a Windows 7 USB using "Windows 7 USB/DVD Download Tool" ? (Linux as host)

  - by Abel Coto

  I want to download the Windows 7 professional iso (x32), from microsoft, and , i can do two things. Or buy a new burner , as mine doesn't work (i am trying to decide what dvd writer i could buy) or use a usb dongle to copy the iso to it , and install it via usb. I want to install Windows 7 in a netbook that now has debian,and in my pc. I think i have to buy only the license for the pc , as the netbook came with windows 7 preinstalled, so i suppose that i can use that serial to activate the windows , although i don't know how to install windows 7 starter instead of professional (i think if you remove a file from the iso, windows let you choose the edition to install). The problem is that in both pcs there isn't any windows , only debian. My father has a netbook with windows 7 starter, but i think it hasn't antivirus (at least until have the Karspersky Internet security for 3 pcs bought ), and i don't trust to make the usb there , if i don't now that there isn't any virus or malware. So i am trying to find a way of Create a Windows 7 usb installation , to at least be able to install windows 7 in the netbook without a external dvd writer. I know that with dd in linux you can copy a debian.iso to the usb , and then install debian with it (i've done it) using something like dd if=win7.iso of=/dev/sdb, but i don't know if this would work for windows 7 iso,and if dd will correctly copy the iso to the usb. I suppose that if you are able to boot and install windows 7 from the usb , is that the method works,and you can forget of problems later with the windows 7 installation (problems because some files could not be copied or like). So , i remembered that Microsoft created a tool to copy the iso to the usb using windows. So i thought that i could install in my pc , virtual box , as i have VT and 8 GB ram in it, and download the iso from microsoft ,install windows 7 in the virtual machine , and then copy the iso inside the machine , donwload the iso tool, and atach a usb to the pc, connect it to the guest , and use the tool to copy the iso to the USB. But i don't now if is possible to use a virtual machine to do this , or the virtualization could give problems with the usb, or something. I have found some minutes ago this How to make a windows 7 usb flash install media, from linux? The first method (dd) is the one i like more , and i trust more ( i don't now if the second method using ms-sys , works well , and if i can trust it. I understand that a iso is like a .rar , but no compressed,only containing the files ,so mount the iso and cp the data inside perhaps is ok. Although the method i like more is the microsoft one (more because is from microsoft , and i suppose they now what they do ,at least with this usb related thing, than anything). Perhaps worth more to buy a external dvd writer haha ... Should the virtual machine method work ?

  Read the article

• virtualized windows 2003 domain with CentOS 5.3 and poor connectivity

  - by Chris Gow

  Hi: I have a test lab set up running a virtualized windows 2003 domain on a CentOS 5.3(xen) host and am experiencing connectivity problems with guests running on other hosts that are part of the same domain. Here's the setup: On Computer A I have CentOS 5.3 running as the host and have virtualized windows 2003 servers for a primary domain controller, a backup domain controller and an exchange server. The primary domain controller also acts as a WINS and dns server. The windows domain appears on a separate subnet from my company's corporate network. Connectivity to any of the virtualized guests on Computer A is fine (remote desktop, ping, what have you). I have another host computer (Computer B) that also has a virtualized Windows 2003 server guest that is part of the same domain. However, connectivity to that guest is flaky at best. I continuously get at least 60% packet loss when I try to ping the guest, and due to that flakiness I can not access any of the services that it runs (remote desktop, web). Now here's the interesting part. It seems to affect only machines running on a different computer than the domain controller that are in the same domain. On Computer B there is another Windows 2003 guest that is not part of the test domain and is on my corporate network. There's no connectivity issues with that guest machine. The problem does not seem to be specific to Computer B either. I created a test VM on my local computer within the test domain and it exhibits the same behaviour as the guest in Computer B. A couple of items to note: - Host OS on both Computer A and B are the same CentOS 5.3 64 bit - Guest OS is Windows 2003 64 bit and 32 bit (the guest on Computer B is 32 bit) - Guest OSes are all up to date (as of Monday) - Host OS on Computer A was upgraded from CentOS 5.2 to 5.3 Update: Sorry I did not follow up with the comments from below. Computer A and B have been moved to their own dedicated switch and the problem has gone away. I'm not sure what the underlying problem(s) were though

  Read the article

< Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >