Search Results

Search found 1063 results on 43 pages for 'alternate'.

Page 18/43 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • setting rpmforge repository for Linux (RHEL)

    - by Ashish
    Hello, I had a Linux centos(5.5) machine, on this i had deployed amavisd (with clamav and spamassassin). Referred these: http://wiki.centos.org/HowTos/Amavisd http://wiki.centos.org/PackageManagement/Yum/Priorities Now I have a linux RHEL machine, details are as follows: (Linux version 2.6.18-164.6.1.el5 ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) x86_64 GNU/Linux Red Hat Enterprise Linux Server release 5.5 (Tikanga)) I want to set up the above mentioned software's on this(RHEL) machine, for that I do (as per the reference link): install yum-priorities but i am unable to install this on my said machine, because the default yum repository provided by RHEL doesn't contain this. How can i deploy the above software's on my RHEL machine, suggest any safe alternate. Please guide since i am a newbie in this matter. thanks in advance Ashish Sharma

    Read the article

  • Logging on as root without winbind timeouts

    - by Josh Kelley
    How can I set up my Linux box so that, if the Active Directory domain controller is down, I can still log in as root, without any timeouts or delays? Following the example of most of the documentation out there, I've listed pam_winbind.so before pam_unix.so in my /etc/pam.d configurations. I believe that this is the cause of the problem. I remember seeing alternate /etc/pam.d setups that change the order and maybe add either pam_localuser or pam_succeed_if (to see if the uid is less than 500), but I can't find any specifics now (and I'm not enough of an expert in PAM to quickly and easily come up with a robust configuration on my own). What is the recommended setup for PAM with Winbind to avoid timeouts and delays if Active Directory is unavailable?

    Read the article

  • forward all mail on a specified domain to script

    - by David
    Hey all! I run a disposable e-mail service that accepts all incoming mail and forwards it to a PHP script that stores it in a database for people to view. Before now, I have been on shared hosting with cPanel, which makes it easy to pipe e-mails to a script. Now, however, I got my own VPS, and it doesn't have cPanel. How do I pipe e-mails to script? Further, how do I pipe emails to any address on certain specified domains to my script? You see, aside from the main domain, there are several alternate domains that people can use if the main domain is blocked, and on each domain I want any address to be usable (xyz@domain, abc@domain, anythingelse@domain). The VPS has Ubuntu 9.04 installed, and I have been experimenting with Postfix, though I can switch to Exim or Sendmail if it is easier.

    Read the article

  • Does the nginx “upstream” directive have a port setting?

    - by user55467
    moved from:http://stackoverflow.com/questions/3748517/does-nginx-upstream-has-a-port-setting I use upstream and proxy for load balancing. The directive proxy_pass http://upstream_name uses the default port, which is 80. However, if the upstream server does not listen on this port, then the request fails. How do I specify an alternate port? my configuration: http{ #... upstream myups{ server 192.168.1.100:6666; server 192.168.1.101:9999; } #.... server{ listen 81; #..... location ~ /myapp { proxy_pass http://myups:81/; } } nginx -t: [warn]: upstream "myups" may not have port 81 in /opt/nginx/conf/nginx.conf:78.

    Read the article

  • Grub install fails while installing Ubuntu on RAID

    - by Warren Pena
    I'm trying to install Ubuntu 9.10 using the alternate install CD, but I keep getting stuck. I get through the first few steps of the install process easily enough (telling it what partition to install to, what user ID and password to create, time zone, etc.), but then it suddenly pops up a menu asking me what the next step in the install process is. It has "Install the GRUB boot loader on a hard disk" selected by default. When I select it, it goes to another screen with a progress bar and a label "Installing the 'grub2' package." The progress bar gets to 16%, and then I get returned to the same menu. No matter how many times I try to install grub, the exact same thing happens. I'm trying to install Ubuntu on a two disk RAID-1 array. This is the RAID card I'm using: http://www.siig.com/ViewProduct.aspx?pn=SC-SAER12-S2. Any ideas what may be causing this to happen and how I can fix it? Thanks!

    Read the article

  • Why BSNL 3G not opening some websites ? [closed]

    - by Sarang
    I am Sarang Dave from India. I am using BSNL 3G prepaid wireless broad band. When I have purchased it, it could open the website : http://stackoverflow.com But, now from last 2 months, I am unable to open this website. :( I have changed my DNS server to 8.8.8.8 & Alternate server to 8.8.4.4. This both are the free google dns servers. But, still facing the same problem. For reference : http://code.google.com/speed/public-dns/docs/using.html I am getting following error after loading : The server at stackoverflow.com is taking too long to respond. Please suggest the solution. For reference : Few websites not opening with BSNL 3g Husshhh!! Finally DNS issue solved In Pune By BSNL 3G team. BSNL 3G: Ya Sites will open now :P Thank you.

    Read the article

  • How to boot between OSes from inside each OS? in a Windows/Ubuntu dual boot system

    - by TheCompander
    My ideal scenario is that there is a script/command to boot into the alternate OS from the current OS you are in, restarting the same OS without running the script/command will return it to the same OS. Currently I have grub setup to remember the last OS booted, using GRUB_DEFAULT=saved and GRUB_SAVEDEFAULT=true, I'd like to keep this option. I have read about the ability to manipulate grub from within Ubuntu to boot into windows, shown in this link. Is there a way to similarly boot into Ubuntu from within Windows? I am primarily connecting to this device remotely and hence my query.

    Read the article

  • How do I access a shared folder using credentials other than the ones I logged in with?

    - by George Sealy
    I have a lab full of Windows 7 machines, and a shared login (user360) that all my students use. I also have a shared folder that they can all have read/write access to (for moving files around easily). My problem is that I also want to be able to create a shared folder for each student for submitting assignments. I can set up a shared folder with permissions for just a single user, and not the 'user360' account. The problem is, when I'm logged in as user360, and I try to open the 'StudentA', Windows never asks me for alternate credentials, it just refuses access because the user360 account is not allowed access. Can anyone suggest a fix for this?

    Read the article

  • Email is stuck in the queue with 421 4.2.2 Connection dropped due to SocketError

    - by e0594cn
    We recently installed an Exchange 2010 Server and we are having some problems sending emails to certain domains. Email is stuck in the queue with 421 4.2.2 Connection dropped due to SocketError. Any Suggestion? The below is the message when using telnet command: EHLO etla.com.cn 250-aa6061.com Hello [58.215.221.50] 250-TURN 250-SIZE 15360000 250-ETRN 250-PIPELINING 250-DSN 250-ENHANCEDSTATUSCODES 250-8bitmime 250-BINARYMIME 250-CHUNKING 250-VRFY 250-X-EXPS GSSAPI NTLM LOGIN 250-X-EXPS=LOGIN 250-AUTH GSSAPI NTLM LOGIN 250-AUTH=LOGIN 250-X-LINK2STATE 250-XEXCH50 250 OK MAIL FROM:[email protected] 250 2.1.0 [email protected] OK RCPT TO:[email protected] NOTIFY=success,failure **550 5.7.1 Your email messages have been blocked by the recipient OR by Trend Mic ro Email Reputation Service. Contact the recipient or his/her administrator usin g alternate means to resolve the issue.**

    Read the article

  • Simple recursive DNS resolver for debugging (app or VM)

    - by notpeter
    I have an issue which I believe is caused by incorrect DNS queries (doubled subdomains like _record.host.subdomain.tld.subdomain.tld) when querying for SRV records. So I need to an alternate DNS server with heavy logging so I can see every query (especially stupid ones), acting as a recursive resolver with the ability create records which override real DNS records so I can not only find the records it's (wrongly) looking for, but populate those records as well. I know I could install a DNS server on yet another linux box, but I feel like this is the sort of thing that someone may already setup a simple python script or single use vm just for this purpose.

    Read the article

  • Postgresql 9.2 where is the initdb located on Ubuntu

    - by thanikkal
    I am trying to install postgres on EC2 / EBS. I am following this article and stuck at the following step. sudo su - su postgres - /usr/pgsql-9.0/bin/initdb -D /pgdata I cant find the initdb command located at the stated location, matter of fact i cant find the pgsql* directory at all under /usr folder. Was this changed for Postgres 9.2 or is there an alternate command that would help me initdb? edit 1: I know the folder pgsql-9.0 is version specific, so i was expecting to see more like pgsql-9.2 or similar.

    Read the article

  • Has anyone used products by StorSimple? [closed]

    - by AlamedaDad
    Their products are storage systems similar to NetApp, but their "hook" is they provide automated tiered storage with the third tier being Cloud providers like Amazon and Azure. They have an interesting story in which they provide primary SAN/iSCSI storage to VMWare and Exchange and at the same time do snaphots to the Cloud. This provides a possible DR option if you have a second system at an alternate location. I was impressed, but I've never heard of them so I'm looking for input and advise on the product. Thanks in advance...

    Read the article

  • zero-config CGI enabled web server

    - by halp
    To serve static content of a directory over http, one can simply navigate to that directory and type: python -m SimpleHTTPServer 11111 which will start a http server on port 11111. This hack is nice because it requires zero-config: no stand-alone web server, no config files at all. Is it possible to extend this example, or have an alternate way to achieve this goal, but also have CGI support? The final goal is to have a quick and lazy way of serving a web site from a certain directory. The site has static content (HTML pages, images), but also a CGI script. The CGI script must work properly when accessed via browser. Of course I could setup a virtual host in apache, allow CGI inside it etc. But that's not a zero-config approach.

    Read the article

  • PEN daemon as load balancer, IIS web logs not showing true requester IPs

    - by Aszurom
    I have a Hercules vmware appliance, which is a micro-linux vm that runs the PEN daemon and acts as a server load-balancer. It takes any incoming request on the appliance's IP and routes it out to a number of alternate IPs. The logs of the daemon show the true IP of the browsers hitting the website. The logs of the websites themselves (iis 6 and 7) only show the requester IP as being that of the load balancer. The IT manager tells me that when we had a hardware appliance (serveriron XL) doing the load balancing, the web logs reflected the requester IPs accurately. Is there any way to get this resolved with the daemon, or will I be digging that out of the closet and plugging it back in?

    Read the article

  • What is the purpose of a boot priority sequence or order in BIOS

    - by rbeede
    A BIOS provides multiple options for specifying an order/priority to search for boot devices. Is there really much of a purpose now to have to specify more than one possible boot device? It would seem to me it is only useful when popping in an CD/DVD to install an OS after which the common scenario is to always boot from the hard drive unless something is broken. I'm curious as to why not simply have 1 option/device to set in the BIOS and expect the user to press a key to do alternate boot instead? Is there still a scenario for having the BIOS try multiple devices in a configured order?

    Read the article

  • iPod Nano 5th gen Album Artwork

    - by Wesley Caretto
    I am an album artwork fan. I just got all of these brand new alternate artwork covers for my albums and singles. Eventually, i got bored of them, and i wanted the original ones back. So i got on iTunes, and changed the original album covers to the primary covers. I synced my ipod, but it still showed the new covers on it, not the originals. I figured a temporary way to fix it, by deleting the new covers i got, making the originals the default. There has to be an easier way, though. p.s. this also works in vice-versa. I will add the new covers, but before i exit, i change the primary cover to the original. When i change it back to the new one, my iPod will still only show the original Thanks for helping!

    Read the article

  • Ubuntu 10.04 install - frozen at splash, no errors

    - by Andrew Bolster
    Has anyone else come across this? After about as much of a fresh install as i can muster without buying new drives, and after walking through the amd64 alternate install with ease, and after a little 'pre-splash' screen where the orange dots under the (very sexy) new ubuntu logo blink away, I'm left with a vista of purple hues and logo plonked in the middle, with the dots not going anywhere. I was at this same position last night at 3 in the morning, left it lying overnight, and nothing had changed, so I'm pretty sure its frozen, the virtual terminals are not accessible, ie, c+a+F1 etc does nothing, but when i go in and inspect /var/log/* in the recovery console by booting off the installation cd, no errors, no complaints, no problems. I'm at my wits end and am just about ready to try anything. If this was on SO I'd be bountying, but if anyone can help you'll just have to cope with my thanks! Additional Details on my blog and my first attempt at asking for help Update: I can reasonably say it is not a hardware fault, as a full install of 9.10 with dual screen nvidia xinemara indicate that nothing is wonky

    Read the article

  • Ubuntu 10.04 install - frozen at splash, no errors

    - by Andrew Bolster
    Has anyone else come across this? After about as much of a fresh install as i can muster without buying new drives, and after walking through the amd64 alternate install with ease, and after a little 'pre-splash' screen where the orange dots under the (very sexy) new ubuntu logo blink away, I'm left with a vista of purple hues and logo plonked in the middle, with the dots not going anywhere. I was at this same position last night at 3 in the morning, left it lying overnight, and nothing had changed, so I'm pretty sure its frozen, but when i go in and inspect /var/log/* in the recovery console, no errors, no complaints, no problems. I'm at my wits end and am just about ready to try anything. If this was on SO I'd be bountying, but if anyone can help you'll just have to cope with my thanks! Additional Details on my blog and my first attempt at asking for help

    Read the article

  • Windows data backups with alternating removable drives?

    - by luke
    0 vote down star I have a removable disk drive (RD1000 from Dell), and I am looking for backup software that will allow me to backup every night, and every morning switch to the alternate disk. There is only one directory structure to back up, what I want is two copies, one which I will take home with me every night, one which will be backing up every night, and when I get in in the morning, I will switch them. So for instance I have disk "a" and disk "b". On Monday night I want to go home with disk "a" and leave disk "b" in the drive, so that a scheduled back up will be written to it. On Tuesday morning I will come in and swap disks, and I will take "b" home that night, leaving "a" for the backup. And so on for the remainder of the week. FOSS software preferred, Freeware acceptable, paid software as a last-ditch effort. Oh, btw I'm stuck with Windows 2000 Thanks in advance.

    Read the article

  • Apache - Include conf Files Relative to ServerConfigFile (-f arg)

    - by Synetech inc.
    Hi, I want to use the -f command-line option for the Apache server so that I can store the conf files in a separate place (a data diectory) from the server binaries. The problem is that I use the Include directive to separate and organize the configurations, but when I use a command like Include "addons/SVN.conf", it fails because Apache looks for addons/SVN.conf in relative to the ServerRoot directory instead of the ServerConfigFile directory. I can work around this by using absolute paths (eg Include "e:\foo\bar\baz\Apache\conf\addons\svn.conf", but I don’t like that since it means I would have to change each and every Include directive if I move the conf folder as opposed to simply changing the -f option. Does anyone know of a way to get the Include directive to work relative to the conf file that Apache is passed. I tried Include "./addons/SVN.conf", but that too was relative to the ServerRoot. This forced relative-to-ServerRoot Include behavior kind of defeats the whole purpose of specifying an alternate config file to the one in ServerRoot/conf. Thanks.

    Read the article

  • Windows 7: Open File - Security Warning box appears for every app on the desktop

    - by Michael Ratanapintha
    Whenever I double-click to open an executable on the desktop (.exe, .bat, etc.), or a shortcut on the desktop that points to an executable, the "Security Warning" pops up and asks me "Are you really sure you want to open that? Stuff from the Internet is dangerous!" I don't usually mind this warning and don't want to disable it globally, but now I'm getting it for any executable on the desktop, even ones that I didn't download from the Web and don't have the Mark of the Web alternate data stream. (That is, streams -d * shouldn't and doesn't help.) This started fairly recently, but I can't really point to anything I did that triggered it. It only occurs in one user account on the machine; the other account doesn't have this problem. Running System Restore didn't help. How can I fix the problem and make the pop-up warning appear only when it's supposed to?

    Read the article

  • What are the consequences of giving an AD domain differing NetBIOS and DNS names?

    - by Newt
    In the past, when creating AD domains, I've used the common convention of using a sub-domain of the company's publicly registered domain name, e.g "corp.mycompany.com" or "int.mycompany.com". I've always accepted the default NetBIOS name when running DCPromo, for fear that creating a NetBIOS name that differs from the sub-domain may cause complications. I've recently been doing a bit of research on the consequences of providing an alternate NetBIOS name. The main reasons behind this are: The NetBIOS name isn't particularly descriptive or unique to the company Apparently generic NetBIOS names such as "CORP" or "INT" can cause issues when merging IT systems (although I've not had experience with this myself) Providing something "before the slash" that means more to users (less important) In looking at the possible downsides, the only one I can come up with is the disjointed namespace issue when configuring Exchange. Can anybody with more experience than I elaborate on my findings at all? Many thanks

    Read the article

  • Recover RAID 5 data after created new array instead of re-using

    - by Brigadieren
    Folks please help - I am a newb with a major headache at hand (perfect storm situation). I have a 3 1tb hdd on my ubuntu 11.04 configured as software raid 5. The data had been copied weekly onto another separate off the computer hard drive until that completely failed and was thrown away. A few days back we had a power outage and after rebooting my box wouldn't mount the raid. In my infinite wisdom I entered mdadm --create -f... command instead of mdadm --assemble and didn't notice the travesty that I had done until after. It started the array degraded and proceeded with building and syncing it which took ~10 hours. After I was back I saw that that the array is successfully up and running but the raid is not I mean the individual drives are partitioned (partition type f8 ) but the md0 device is not. Realizing in horror what I have done I am trying to find some solutions. I just pray that --create didn't overwrite entire content of the hard driver. Could someone PLEASE help me out with this - the data that's on the drive is very important and unique ~10 years of photos, docs, etc. Is it possible that by specifying the participating hard drives in wrong order can make mdadm overwrite them? when I do mdadm --examine --scan I get something like ARRAY /dev/md/0 metadata=1.2 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b name=<hostname>:0 Interestingly enough name used to be 'raid' and not the host hame with :0 appended. Here is the 'sanitized' config entries: DEVICE /dev/sdf1 /dev/sde1 /dev/sdd1 CREATE owner=root group=disk mode=0660 auto=yes HOMEHOST <system> MAILADDR root ARRAY /dev/md0 metadata=1.2 name=tanserv:0 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b Here is the output from mdstat cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdd1[0] sdf1[3] sde1[1] 1953517568 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU] unused devices: <none> fdisk shows the following: fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bf62e Device Boot Start End Blocks Id System /dev/sda1 * 1 9443 75846656 83 Linux /dev/sda2 9443 9730 2301953 5 Extended /dev/sda5 9443 9730 2301952 82 Linux swap / Solaris Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de8dd Device Boot Start End Blocks Id System /dev/sdb1 1 91201 732572001 8e Linux LVM Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00056a17 Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 8e Linux LVM Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ca948 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/dm-0: 1250.3 GB, 1250254913536 bytes 255 heads, 63 sectors/track, 152001 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-0 doesn't contain a valid partition table Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x93a66687 Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe6edc059 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/md0: 2000.4 GB, 2000401989632 bytes 2 heads, 4 sectors/track, 488379392 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 524288 bytes / 1048576 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Per suggestions I did clean up the superblocks and re-created the array with --assume-clean option but with no luck at all. Is there any tool that will help me to revive at least some of the data? Can someone tell me what and how the mdadm --create does when syncs to destroy the data so I can write a tool to un-do whatever was done? After the re-creating of the raid I run fsck.ext4 /dev/md0 and here is the output root@tanserv:/etc/mdadm# fsck.ext4 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Superblock invalid, trying backup blocks... fsck.ext4: Bad magic number in super-block while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 Per Shanes' suggestion I tried root@tanserv:/home/mushegh# mkfs.ext4 -n /dev/md0 mke2fs 1.41.14 (22-Dec-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=128 blocks, Stripe width=256 blocks 122101760 inodes, 488379392 blocks 24418969 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 14905 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 and run fsck.ext4 with every backup block but all returned the following: root@tanserv:/home/mushegh# fsck.ext4 -b 214990848 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Invalid argument while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Any suggestions? Regards!

    Read the article

  • DNS server at router level vs. computer level

    - by Craig
    I've three questions. Is it better/faster/optimal to set up your server's preferred and alternate DNS servers in your OS's network settings or in your router settings? Will it cause problems if it is set up in both places, both pointing to the same IPs? I am running Windows and I have my network assign a static IP to one of my computers. This doesn't allow me to obtain the DNS server addresses from my router automatically. Is there an IP I can put in that will cause it to take the DNS server addresses from the router?

    Read the article

  • LTO 3 tape drive needing repaired

    - by DO it all Paul
    We have an IBM LTO 3 tape drive that needs repaired and with the £400 price tag i'm having to shop around for quotes. My question is has anyone actually repaired one before and how was in done? The first error LED was showing a 6, then i cleared the mangled tape only for it to start flashing alternate 'o' on the 7 segment display, simliar to a half 8, flashing top to bottom and it would just flash away like that coupled with a flashing amber light. I tried a reset holding the eject button for it to show an 'r' the go back to flashing again as before. I checked the IBM solutions for the codes but this flashing isn't documented at all. Would be great if anyone had any experience in this area. Thank you, Paul

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >