Search Results

Search found 2042 results on 82 pages for 'booting'.

Page 18/82 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • Chameleon 2 RC4 with some more kexts

    - by user36912
    My Lan is working when i am booting from Empire EFI boot CD, but its not working when i am booting from Chameleon 2 RC4. How can i add kext from EFI boot CD to Chameleon? so that chameleon also can auto load the kext necessary for LAN to work. Chameleon 2 RC is installed on my Partition.

    Read the article

  • Creating rescue / install USB flash disk for CentOS

    - by wwwpanda
    For CentOS installation CDs, you can install OS, as well as booting into "rescue" mode so that you can do a chroot mount on the system partition for problem solving, even the system is installed in hardware RAID drives. How can we create a similar thing but on usb flash drive? I tried to do it with unetbootin, but when booting into the USB, eventually the CentOS setup still requires presence of CDs. Ultimately, I want to use this usb flash drive for remote disaster recovery through say HP iLo remote console / Dell iDrac etc.

    Read the article

  • Is it perfectly safe to install grub bootloader on regular partition?

    - by Flint
    One of the methods to do dual booting Windows with Linux OS is by installing grub boot loader onto Linux partition so you can retain Windows boot loader and let Windows handles the dual booting process. What's the odd that grub bootloader could partially overwrite the data at the beginning of the Linux partition and corrupt the file? Does grub actually check if there's a data at the beginning of the partition and move it to other location on the partition before writing its bootloader?

    Read the article

  • Windows 7 boots with a blank screen with mouse cursor only.

    - by user2352
    My Windows 7 machine was powered down without logging out first. Now when booting the PC, Windows 7 does not completely start--instead it boots to an all-black screen with a mouse cursor that can be moved around. There are no icons, toolbars, etc. Ctrl+Alt+Del does not bring up the Task Manager. Booting to Safe Mode renders the same result.

    Read the article

  • Windows 7 Error Recovery upon boot

    - by nijikunai
    My system doesn't boot at all, upon starting it takes me to the Windows Error Recovery screen saying "Windows failed to start, a recent software or hardware change might be the cause" and gives two options Launch System Repair (Recommended) Start Windows normally But neither options work, upon clicking either of them, some progress bars get displayed and the screen just freezes on "Starting Windows". I tried booting from the Windows 7 disk but it too freezes on the "Starting Windows" screen. I even tried booting from ubuntu, slax linux, but they don't work too.

    Read the article

  • Ubuntu boot hangs on "Attached scsi removable disk"

    - by user115253
    My Ubuntu hangs at boot with message "Attached scsi removable disk". When I boot with param acpi=off, system boots fine. I'm booting from harddrive, not from usb device. I managed to locate source of this problem to the external card reader & usb hub, into which I have connected external keyboard and mouse. If i disconnect it (whole card reader & usb hub), system boots fine. Could you suggest any way to boot successfully without adding acpi=off or disconnecting hub&reader before booting? Output of dmesg after successful boot with acpi=off: http://paste.ubuntu.com/1445812/ Bootrepair generated infos: http://paste.ubuntu.com/1426055/

    Read the article

  • How to mount an external Soundcard during startup?

    - by Moe
    I have an external sound card (Soundblaster XFi HD) connected to my Ubuntu 12.04 32-bit. that won't show up automatically after booting. After each boot process I need to plug the card out of the USB port and reconnect it, then it is found by the system and automatically used. I would like to either have it connected automatically during the boot process or at least have a little script or something which I can use after booting so that I don't have to manually plug the device off and on. Please note that I'm a total noob. If you don't mind please tell me the procedure step by step. Also, if I need to get some information via the terminal I'd need to be told the precise command to get it.

    Read the article

  • LiveCD does not work on my desktop

    - by Boris
    I've installed Oneiric on my laptop without any issue using the LiveCD downloaded here (from the French Ubuntu community server). But on my desktop, weird things happen: During the 1st try booting with the LiveCD on my desktop, my 2 year old child just hit the keyboard, and after several error messages the desktop loaded and I've been able to test Oneiric. But I wanted to redo a boot before installing Oneiric to avoid mistakes. So during the 2nd time I tried to boot with the LiveCD, I couldn't access to the point where I can choose to test or install. Before trying a 3rd time, I've "cleaned the system" from System Parameter System. But after that I'm still not able to access to the point where I can choose to test or install. Now it stops all the time on a black screen. I do not understand why several boot attempts with same CD have several results. So I wonder if the state of my current installation 11.04 can affect re-booting with my CD 11.10 ?

    Read the article

  • Installing on a Lenovo S10-3

    - by Søren Hauberg
    I'm trying to install Ubuntu 10.10 netbook edition on my Lenovo S10-3. According to the release notes, there is a bug in the kernel that forces me to add intel_idle.max_cstate=0 to the kernel parameters. I did this when booting the install CD and I was able to install Ubuntu. During the installation I chose to fetch updates from the net. Now when I try to boot the machine it just hangs. I have tried booting the machine as-is and I have tried adding the above-mentioned kernel parameters. Same experience. So, my questions is how do I install 10.10 in this machine and how do I boot it after I've installed the OS?

    Read the article

  • Graphics on boot split into three sections

    - by a sandwhich
    I just installed 13.04 onto a new laptop because of the ease of install with the uefi bios. When I boot the system though, the screen is split into three sections each about 640x200 at the top of the screen, with the active terminal mirrored across them. Although I can login, startx fails due to something about a file. I have tried booting with vga=711 and normal nomodeset with no success. Booting the live usb I originally installed from results in the same issue. The graphics driver in the xorg.conf.something from what I can make out is set to vesa, but it could be set to some other four character value that is similar to vesa, hard to tell. How can I fix this? One thing to note, the laptop has two dedicated GT 750m's, along with the intel 4000 built into the processor. This is what it looks like, the purple box is what the grub2 menu was in before boot.

    Read the article

  • How to fix the boot loader with an installation disk at hand

    - by Bragboy
    Hi, I recently messed up my Master Boot Record and my system is not booting. I was dual booting Windows and Ubuntu. Both of them are not loading now. I don't care if I lose my windows, but I want my Ubuntu back!! How to get it (I have a fresh Ubuntu 10.10 LTS disk with me). I went through the install wizard but feared that I may loose my existing installation/setup. Thats why I came here to check what is the ideal procedure to only update the Boot record instead of a full installation.

    Read the article

  • Black screen after installing ubuntu 11.10 on new pc

    - by wouter205
    Could anyone troubleshoot me please; After installing ubuntu on my fresh desktop, the ubuntu loading screen shortly appears and then I get a black screen and cannot access the login screen. When booting in failsafe modus, i get a message that ubuntu failed to load failsafe video drivers. I have a radeon 6850 video card and am able to start ubuntu live session. So I guess it loads the wrong drivers upon booting from hd. I remember a file in which you could change which drivers it should load, but forgot the exact location. Could this solve my problem (or another solution)

    Read the article

  • Pls help Installation has ruined laptop

    - by user287694
    Hi this was my time using Linux. So I installed Ubuntu from Windows 7 via USB. After booting into Ubuntu I proceeded to do a full install over windows. This seemed to be going fine but at the point where I was to sign up to Ubuntu one it froze. After awhile maybe 30 mins I realised nothing was going to happen, so I restarted. Now after the bios options bit passes all I get is a prompt flashing at the top left of a black screen. I have tried booting up via USB option but nothing happens, I have tried this 6 or 7 times with fresh usb each time and also with lubuntu. I'm not sure if I have correctly made a live usb obviously I believe I have been but being new I can't guarantee this. Can anyone help me get some functional out of my laptop. Thanks Ben

    Read the article

  • Running UBUNTU from a USB Flash drive on Acer

    - by Byron Blue
    I've made a bootable USB flash drive to run UBUNTU. The drive works fine on MOST laptops/computers I try: It does not want to start on my (favourite) Acer Aspire 5745 (Windows 7 64 bit). The opening screen has SYSLINUX 4.06 EDD 4.06-pre1 (...) and simply sits there. I was using UBUNTU 12.04.1 64 bit until I tried booting to the Acer this morning. I've tried booting to 10.04 as well (saw this as a fix on a discussion) with the same result. I really want to use the Acer for development and do not want to wipe my Windows 7 from the hard disk. Are there any solutions/answers?

    Read the article

  • The Windows 8 and Ubuntu 12.04 Dual Boot NIghtmare

    - by Steve
    I have done some research as to how to go about this dual-boot, and I am close, but I need some guidance with booting into Windows 8 (Ubuntu is installed). I have a Lenovo Ideapad y510p. I will go over what I have done to dual-boot this laptop, with windows 8 pre-installed, with Ubuntu 12.04: I followed every instruction to the letter for the 97-vote response here, and everything worked fine up until after the repair boot section: Installing on a Pre-Installed Windows 8 System (UEFI Supported) I ran into the following error upon restarting after the repair boot section: error: invalid arch independent elf magic. This error (a grub issue) disabled me from booting into Ubuntu :( After a little googling, I followed the instructions in the reactivating grub 2 section to resolve the error: http://kb.acronis.com/content/1686 I found a possible solution to fixing the Windows 8 boot issue, and tried it: http://webcache.googleusercontent.com/search?q=cache:i9JMyXzzRpYJ:askubuntu.com/questions/279275/dual-boot-problem-windows-8-ubuntu-12-04+&cd=1&hl=en&ct=clnk&gl=us&client=ubuntu I thought the above solution worked, but when I attempt to boot into Windows 8, I get the following missing file error: File: \Boot\BCD Status: 0xc000000e Info: The Boot Configuration Data for your PC is missing or contains errors. Here is some other information that may be useful: I have 3 partitions devoted to Ubuntu. The first, sda8, has a flag bios_grub (1049 kb). The second, sda9, is where everything else is (96.6 GB). The last, sda10, is for swap (8299 MB). My question is: How do I fix the boot configuration for Windows 8? Any help would be greatly appreciated :) Update 1: When I attempt to boot into UEFI mode, I get the following error: invalid arch independent elf magic (the same error I saw in step 2). Update 2: A useful link here I found: Dual booting Ubuntu 12.04: UEFI and Legacy So, this is my 4th time installing Ubuntu on the laptop, and it looks like I need to install it in UEFI mode. Should I scrap it all again, and reinstall? Or is there ANY way of salvaging my installation? At this point, I can't even boot into Windows (although I have an installation cd to fix the windows boot issue, that would ultimately screw over ubuntu). Update 3: After doing a little more browsing around, I found a cool way around this messy grub stuff, using rEFInd. Rod Smith's post here saved me! Installing ubuntu 12.04.02 in uefi mode Now, I am able to dual-boot Windows 8 and Ubuntu and boot into both operating systems :) I have another issue (relating to the boot configuration in the bios) that I will post as a separate question :)

    Read the article

  • Mount TMPFS instead of ro /dev

    - by schiggn
    I am working on a ARM-Based embedded system with a custom Debian Linux based on kernel 2.6.31. In the final system, the Root file system is stored as squashfs on flash. Now, the folder /dev is created by udev, but since there is no hot plugging functionality needed and booting time is critical, I wanted to delete udev and "hard code" the /dev folder (read here, page 5). because i still need to change parameters of the devices (with ioctl /sysfs) this does not work for me in this case. so i thought of mounting a tmpfs on /dev and change the parameters there. is this possible? and how to do best? my approach would be: delete /dev from RFS create tar containing basic devices mount tmpfs /dev untar tar-file into /dev change parameters Could this work? Do you see any problems? I found out, that you can mount on top of already mounted mount point, is it somehow possible just to take data with while mounting the new file system? if so that would be very convenient! Thanks Update: I just tried that out, but I'm stuck at a certain point. I packed all my devices into devices.tar, packed it into /usr of my squashfs and added the following lines to mountkernfs.sh, which is executed right after INIT. #mount /dev on tmpfs echo -n "Mounting /dev on tmpfs..." mount -o size=5M,mode=0755 -t tmpfs tmpfs /dev mknod -m 600 /dev/console c 5 1 mknod -m 600 /dev/null c 1 3 echo "done." echo -n "Populating /dev..." tar -xf /usr/devices.tar -C /dev echo "done." This works fine on the version over NFS, if I place printf's in the code, I can see it executing, if I comment out the extracting part, its complaining about missing devices. Booting OK mmc0: new high speed SDHC card at address 0007 mmcblk0: mmc0:0007 SD04G 3.67 GiB mmcblk0: p1 IP-Config: Unable to set interface netmask (-22). Looking up port of RPC 100003/2 on 192.168.1.234 Looking up port of RPC 100005/1 on 192.168.1.234 VFS: Mounted root (nfs filesystem) on device 0:14. Freeing init memory: 136K INIT: version 2.86 booting Mounting /dev on tmpfs...done. Populating /dev...done. Initializing /var...done. Setting the system clock. System Clock set to: Thu Sep 13 11:26:23 UTC 2012. INIT: Entering runlevel: 2 UBI: attaching mtd8 to ubi0 Commenting out the extraction of the tar mmc0: new high speed SDHC card at address 0007 mmcblk0: mmc0:0007 SD04G 3.67 GiB mmcblk0: p1 IP-Config: Unable to set interface netmask (-22). Looking up port of RPC 100003/2 on 192.168.1.234 Looking up port of RPC 100005/1 on 192.168.1.234 VFS: Mounted root (nfs filesystem) on device 0:14. Freeing init memory: 136K INIT: version 2.86 booting Mounting /dev on tmpfs...done. Populating /dev...done. Initializing /var...done. Setting the system clock. Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. Unable to set System Clock to: Thu Sep 13 12:24:00 UTC 2012 ... (warning). INIT: Entering runlevel: 2 libubi: error!: cannot open "/dev/ubi_ctrl" So far so good. But if I pack the whole story into a squashfs and boot from there, it is acting strange. It's telling me while booting that it is unable to open an initial console and its throwing errors on mounting the UBIFS devices, but finally provides a login anyway. Over that my echo's are not executed. If I then log in, /dev is mounted as TMPFS as desired and all the devices reside inside. When I redo the "mount" command to mount the UBIFS partitions it is executed whitout problem and useable. From squashfs VFS: Mounted root (squashfs filesystem) readonly on device 31:15. Freeing init memory: 136K Warning: unable to open an initial console. mmc0: new high speed SDHC card at address 0007 mmcblk0: mmc0:0007 SD04G 3.67 GiB mmcblk0: p1 UBIFS error (pid 484): ubifs_get_sb: cannot open "ubi1_0", error -19 Additionally, a part of the rest of the bootscripts is still exexuted, but not all of them. Does anyone has a clue why? Other question, is 5MB enough/too much for /dev?

    Read the article

  • My ubuntu partition was deleted and I can't boot from either a DVD or USB

    - by ropudito
    It's my first time installing ubuntu. I have Windows 7 and 8 before in my laptop (Acer Aspire 4752z). After Ubuntu (12.04) installed in my laptop, the Windows boot loader didn't recognize my Ubuntu so I updated grub from a live USB. And after grub updated, Ubuntu was booting perfectly but my Windows wasn't listed in the grub menu. So I follow someone instruction to update grub again. And after reboot, the grub menu didn't show anymore. After searching about this problem on the net and trying to update grub again and again, I decided to delete the Ubuntu partition from live USB. And shortly after, I booted to Windows with Hiren boot and I used mbrfix. But i think it failed. Now i cant show my BIOS setup or boot from DVD or USB. After that, the only screen i can see after booting is: error: unknown filesystem grub rescue>

    Read the article

  • No 'Hardware' tab in audio and no profiles

    - by Gene
    If I run the 12.x ubuntu (latest May 2012) from the CD, I get full audio settings, and sound playing in speaker. Profiles let me change analog to digital in/out. Once I run install from the same CD onto the laptop HD, once it boots the first time, after selecting audio settings, there is no 'Hardware' tab and no way to change profiles. Worst part is the audio device is set to SPDIF so nothing comes out of the speakers. Very off how booting off the CD I can get analog audio, and installing to HD and booting seems to limit the profile to something useless. Laptop is a 5 year old Dell D820 with Nvidea 128meg video on a 1920x1200 screen and T7200 CPU. I suspect if I could get the damn HARDWARE tab back in audio settings, I could just select the proper Analog profile - just as is the case if running from a boot CD. Searched the web, no similar problems found... any help appreciated!

    Read the article

  • partitioning in ubuntu with gparted cant resize

    - by user288830
    I opened gparted and as i can see i have 3 partitions(or i think so) first one sda1 (236 mb) its ext2 type file and its booting point, second one is sda2(rest of the hdd 1.36 tb) extended ntfs type file and i have third one that is within the sda2 called sda5 it takes the same space as sda 2 and its file type is crypt luks, so when i try to resize the sda2 i cant resize it not for even 1 mb, i dont know if that crypt luks file is causing the problem, so i dont know what to do, by the way i can format the crypt luks(sda5) file that in inside sda 2 but i dont know if i should.Can anyone help me please? here are the pictures when i open gparted when i try to resize sda 2 i think i did use encryption i mean while it is booting i type password and its says sda5/scrypt set up succefully or something like that and then it goes to my login screen where i type username and pass that is it

    Read the article

  • Install wont boot up, stuck on loading text dots / restarts

    - by Franz Mayo Horkovic
    Friend gave me her laptop, we agreed on Ubuntu, but I have troubles even booting up live version (see the notebook). I tried 12.04 64bit on USB stick, it does nothing, when I choose booting live version, it just restarts PC. Then I tried 32bit version, it starts loading, but its stuck on loading components, printing on black screen just dots ........... I Googled it, found similar problem - somebody suggested to use older version and then upgrade it. I went through 11.04, 10.04 - 64 and 32 same result. Restart or infinite loading. I did memtest, it showed 4 errors, Windows Vista is running "fine", no "bluescreens" etc. Any ideas what am I doing wrong?

    Read the article

  • How do I create a new usergroup?

    - by Sergiu
    I want to do this because I'm trying to fix user permissions from Ubuntu on my Mac OS X partition and Ubuntu doesn't have the "wheel" group that I so desperately need! Please don't trash me for this but I set my whole Mac OS X partition to give read and write access to everyone so I could access and modify everything on it from my dual-booting Ubuntu OS, and now everything is screwed... I don't have the original Mac OS X installation DVD and booting a Mac OS X 10.5.6 DVD gives me kernel panics... The OS installed on that Mac partition is 10.4.11. Is there any hope for me to ever fix it? I don't have money to buy utilities, and I can't use AppleJack either because my permissions are so messed up... None of the posted answers are what I wanted to do. I wanted to add fields to a user that was on my Mac partition, not a user part of the Ubuntu groups. Is that possible?

    Read the article

  • Can't single boot Ubuntu 13.04 64 bit

    - by stanleyhunk
    I'm new to Ubuntu, I bought an Asus A45VS laptop recently pre-installed with Windows 8, but I have already uninstalled it and wipef the whole HDD. I plan to install Ubuntu 13.04 64 bit on it. I have tried several times to install and uninstall Ubuntu again and again with boot-able USB, but it still fail to boot. All the installation process go fine, after rebooting my laptop, it just stick to the purple screen. Then I boot it with USB again, tried boot-repair, tried make an EFI partition, still the same. I have searched on the web, and all of them was about dual booting with windows 7 or windows 8, I don't wish to do dual booting as I wish to have single OS which is Ubuntu on this laptop. please help, thanks in advance.

    Read the article

  • New computer hangs on shutdown/reboot, how to troubleshoot?

    - by Torben Gundtofte-Bruun
    My system is working perfectly but it freezes during shutdown/reboot/suspend/hibernate: All windows and the menu bar disappear but the desktop wallpaper remains. It doesn't even show the shutdown screen (the one with the animated dots) where I could hit ESC and watch the shutdown console text. The system is brand-new and fully updated using Update Manager. How can I determine what is causing the freeze? Is there a log I can investigate? How can I fix this? I see no obvious cause of the freeze. The only USB attachment is a mouse/keyboard; I don't have any external storage attached; and I don't have any programs running (the machine freezes even when doing shutdown right from the login screen). What I've tried so far: Based on other questions (this, this, and this) that suggest some ACPI settings, I've tried sudo shutdown -h now to see whether the shutdown console text display offers any hints, but the system doesn't even get that far - it still freezes while the screen shown the desktop background image, without any toolbars. Only sudo shutdown --force works, but that's not a solution. Editing the grub menu to add acpi=off to the kernel didn't help. I guess there's not much point in trying the other (lesser) ACPI suggestions? Adding noapic to the grub entry had no discernible effect. Adding nolapic instead did something (I had removed the quiet option) - the system managed to continue further with the shutdown, right until the line Checking for running unattended-upgrades: which were the last characters on the screen. I've also checked the system BIOS, especially regarding power options, but didn't see anything out of the ordinary. Switching the BIOS standby setting from S3 to S1 didn't help. The standby setting can't be disabled, and there are no other ACPI-related settings AFAIK. BIOS reset didn't help. Not surprised; hadn't changed anything. I tried going to a virtual console (CtrlAltF1) as suggested by djeikyb and from there did a shutdown -h now and it froze there too, after this console output. I didn't try killing processes one at a time because I'm still too newbie to figure out how to do that. Booting with kernel 2.6.35.22 rather than 2.6.35.25 didn't help. Disabling the Nvidia drivers didn't help. Booting from Live CD (USB stick in fact) didn't help; it freezes the same way. Booting from Live CD, with acpi=off noapic nolapic didn't help either. Neither did just nolapic. So evidently this is not some custom setting in my install, but some sort of basic issue. MemTest competed in 1 hour without errors.

    Read the article

  • How can I fix intermittent iSight camera functionality on a Macbook Pro 5,2?

    - by Mmmm
    I have a Macbook Pro 5,2 laptop dual booting OSX and Ubuntu. The built-in iSight video camera works only sporadically. By that I mean that sometimes if I boot and try to use the camera it does not work (most of the time) but other times it does. I don't have good repeatable data regarding when it does vs. when it doesn't other than to say that it always seems to work right after I upgrade to a new Linux kernel with the Update Manager and reboot, but then eventually stops working again until I upgrade the kernel again. That is hard to test repeatably, so it's hard to know for sure that that is the case. This has happened consistently with every version of Ubuntu from 10.10 through 11.10. I can get around this by booting into the OS/X partition, since all of the hardware obviously works perfectly on that side of things, but it would be great if I could remain in Ubuntu and do the same thing. Thanks in advance for any inSights.

    Read the article

  • after upgrade from 10.04 to 10.10, no keyboard, cannot login

    - by avar
    Hello, just did upgrade from kubuntu 10.04 to 10.10.. after all done and reboot, when the login box shows up, my keyboard and laptop pad ( mouse ) dosn't work, (plugged in the usb mouse, it works sometimes) but never keyboard. i went to recovery , the boot hung up when it says : [ 17.704053] EXT4-fs (sda9): mounted filesystem with ordered data mode Begin: Running /scripts/local-bottom ... Done. Done. Begin: Running /scripts/init-bottom ... Done. stuck here. nothing works except ctrl+alt+del i tried booting from livecd and update-grub, also tried booting manually from grub command line, everytime it stuck at lines above .. so it's not grub problem . how to solve this ? if it is important, i have ATI mobility radeon HD 5470 card .

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >