Search Results

Search found 14185 results on 568 pages for 'cd drive'.

Page 18/568 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • Recover data from hard drive with partitions (but not most data) overwritten

    - by Macha
    I have a 500GB hard drive I've been keeping around to recover data from that I removed from a failing NAS drive that got sort of... erratic at the end. I finally got rid of the NAS when during a firmware update it removed the partition table. Fast forward to a week ago, when I was building a new PC, and a mixup resulted in me placing the hard drive in question in the new PC and installing Windows XP on the first 100GB. I'm presuming any data on that first 100GB is now gone, but for the rest of it, is there any way I can recover it at home, as professional data recovery is currently too expensive? I have a blank 1TB HDD if I can store any images of that hard drive on. The problem was definitely with the NAS and not the hard drive, as the hard drive had a successful install of Windows when mistakenly place in the new PC, and there were capacitors in the NAS's circuitry clearly broken. The data I want to recover (in order of priority) is: High: Some jpgs of family photos. Medium: Some RAW files. (There are also jpg versions of all of these) Low: Some mp3s, avis and ISOs, I can re-rip most of these if need be, but it'd be handy not to have to. (I don't need a backup lecture, and if you can hold it in from nagging Jeff Atwood for it, you can hold it in from nagging me for it) In short: The partition tables are gone and overwritten. The data is not overwritten, except for an amount equal to the size of a Windows XP SP3 installation.

    Read the article

  • Replacing Failing RAID 1 Drive

    - by mrduclaw
    I hope this is a simple question, but I simply don't know anything about RAID. Some time ago I received a machine that, as I understand it, has two drives in it under RAID 1 (or so that one drive is mirrored on the other and appears as just 1 drive to the OS). Recently, one of these drives has started marking a clicking noise and I would like to replace it. I believe the machine has a hardware RAID controller on the motherboard that handles the RAID stuff, but if it matters the Operating System is Windows XP 32-bit. Is the solution to my problem as simple as buying another drive that is of the same capacity and plugging it in where the clicking drive is currently? Or could I possibly lose everything if the drive that's clicking is the one being mirrored on to the other drive? Is there some menu I need to find before unhooking things? Any best practices out there? I'm sure I'm leaving out some required information, so please just tell me what I'm missing. Thanks!

    Read the article

  • My Hard Drive isn't Working

    - by MeCB
    I never use Safely Remove Hardware with Windows XP. It has been working for me for years with my SD card, mouse, hard drive and memory stick. My hard drive has a USB cable and power cord so I can hook it up to any desktop hard drive. Now my hard drives don't like this and I did not know this till now. I am always careful and to wait till it is all finish accessing the USB before I unplug it. Now three of my hard drives can't be seen by Windows, though the others still work. when I hook it up to another computer it works fine. I use the same USB cable to hook up all of my hard drives one at a time. So my USB cable is good. I think that when I unplugged the hard drive this one time, it had a file it still wanted to see and now only this drive does not work only this computer. Then the same thing happens to my other two hard drive after I used it for a week with the same cables. How can I fix this?

    Read the article

  • Putting and configuring grub on an external drive

    - by HisDudeness
    I want to put a bunch of minor emergency operating systems (such as GParted Live, DSL, Puppy Linux and so on) on a partitioned USB pen drive, with a dedicated grub boot loader on it, which I want to start when I select the drive in the BIOS to boot. The problem is: when writing grub boot options I must tell where kernel and initial ram files are located, but the USB drive can have different letters depending on when I did plug it in, if some others external drive were mounted. So, how can I write appropriate options which automatically refer to the drive grub is installed on without having to specify absolute paths, which might change (I mean, like (hd1,msdos1) ot /dev/sdb1)? And, while we are at it, can I have grub working on a device without an operating system on it to which it can refer? I mean, I want to address the command sudo grub-install /dev/sdb from the LMDE system I'm on right now, but I won't have LMDE on my pen drive. Is that a problem? And installing grub on another device, will I keep the grub I have right now on my HDD?

    Read the article

  • Can't boot freshly burned Ubuntu cd

    - by user89004
    So I just burned a Ubuntu 12.04.1 powerpc .iso on a cd for my iMac G5 running Mac OS X 10.4.11 and it won't even recognize the cd. I burned it on my dad's Windows 7 laptop as the process is way easier (just 2 clicks). Mac OS X 10.4.11 gives me an error when it starts and when the CD is in saying "the disk you inserted was not readable by this computer". What's funny is that I burned a Ubuntu Minimal .iso on a CD and it would totally read that and even boot it though it gave me some errors afterwards and I couldn't install. I even tried going into openfirmware and hitting boot cd:,\tbxi but I get the error "Warning sector size mismatch can't OPEN cd:,\tbxi Can't open device or file" Was there something wrong with the .iso I burned? Mac OS X 10.4.11 won't even mount that .iso it tells me that the HFS file system is corrupt or something, but I know the .iso doesn't contain HFS file system. Any help? I downloaded the .iso from http://cdimage.ubuntu.com/releases/precise/release/ubuntu-12.04-desktop-powerpc.iso

    Read the article

  • How do you force Ubuntu to unmount a disk when you press the eject button on an optical drive?

    - by Michael Curran
    When upgrading my hardware, I also upgraded to Ubuntu 10.10. On my previous system (with 10.04 and earlier) when I ejected a disk from the optical drive, the subfolder in the /media directory was automatically removed. In my new 10.10 system, if I don't eject the disk using the "eject" command within the system, the disk remains mounted, even after a new disk is installed. The new drive is a Blu Ray drive, but I haven't noticed any other problems from it. Normally, this isn't a problem, but it makes installing applications that are spread over multiple CDs more difficult in many cases (i.e. Wine). Any advice?

    Read the article

  • How do you forcibly unmount a disk when you press the eject button on an optical drive?

    - by Michael Curran
    When upgrading my hardware, I also upgraded to Ubuntu 10.10. On my previous system (with 10.04 and earlier) when I ejected a disk from the optical drive, the subfolder in the /media directory was automatically removed. In my new 10.10 system, if I don't eject the disk using the "eject" command within the system, the disk remains mounted, even after a new disk is installed. The new drive is a Blu Ray drive, but I haven't noticed any other problems from it. Normally, this isn't a problem, but it makes installing applications that are spread over multiple CDs more difficult in many cases (i.e. Wine). Any advice?

    Read the article

  • how can i safely remove an external hard drive?

    - by Edmond Condillac
    Two of the three icons of the drive's partitions show on the desktop. One has disappeared and the contents are not accessible. Right clicking on the desktop icon of the partition gives the option to eject. Then the error message shows that the drive is busy and cannot be shut down. The drive is continually pinning. Kindly advise if possible how to safely remove the drive. Can the lost icon of the third drive and the datd contained in it be found, please? Kind regards

    Read the article

  • How do I programmatically create a bootable CD?

    - by Nicholas Flynt
    I'm using a barebones tutorial as the basis for an OS I'm working on, and it seems to be an older tutorial: it has be compiling the kernel down to a floppy image, and then loading it with GRUB. Basically, I still want to use GRUB, but I'd like to have my OS run from a CD instead. The main reason is that I don't actually have a real floppy drive available (I'm testing in VirtualBox currently) and I thus have no way to test my OS on real hardware. I've been poking around on the net, and I can find lots of utilities that create a bootable CD from a floppy image, but these all seem to require an actual floppy drive, plus it's not really what I'm looking for. I'd like to be able to end up with a bootable CD during my make step ideally, without needing to first place the image on a floppy, which seems rather pointless. I guess the easy way to answer this: How do I set up GRUB to read my kernel image from a CD? Will I need a special utility to do this from Windows? (The kernel can't compile itself yet, that's not for a looong while) Thanks!

    Read the article

  • Mac CD rippers and Metadata

    - by Kapil
    Hi Guys, I want to rip some of the old CDs into MP3. I know thats easy. But, how can I also save myself from tedious step of adding the artist names and song name into teh ripper. Itunes only shows data using track1,2,3. How can I add metadata? are there any good softwares? I am open to windows too :)

    Read the article

  • I accidentally made my new hard drive (the non system drive) my primary partition

    - by qwerty2
    Hi all, When installing a new hard drive, I accidentally formatted it using 'Disk Management' and set it up as my primary active partition, even though it isn't the system drive. Then, when I restarted my machine, Windows wouldn't boot, citing a missing or corrupt SYSTEM folder. Can anyone help me re-enable the system hard drive as my primary active partition? Any help would be greatly appreciated.

    Read the article

  • Repair corrupt hard disk on Mac without install CD

    - by Sarah
    The hard disk of my late 2009 MacBook Pro appears to have become corrupted. I am traveling and do not have my install CD (and won't for several weeks, nor will I be anywhere near an Apple store). The hard disk is not the original, which failed in June 2011. It's some Hitachi replacement installed by IT. History: I was typing an email this afternoon, my computer suddenly started making soft clicking sounds and then froze. I was not moving around. I rebooted, which took a while. I heard more clicking sounds and the computer froze at least once again. It's now kind of working, with mdworker sucking up one CPU. There are no awkward hard drive sounds when I run Chrome or play music. However, when I launched Stickies, I found no trace of my saved Stickies. I ran a live disk verification from within Disk Utility, and it reported Problem: As reported, I don't have access to an installation disc and am nowhere near an area where I can get one for at least two weeks. I have the option of asking someone to go to some trouble and expense to get one for me, but I'm not sure it's worth it: I've read that I can use fsck from single-user mode to repair the disk. Should I just try this? Is it risky? I'm concerned that the clicky sound portends imminent (mechanical) hard drive failure, so it's not worth doing a silly repair. This hard disk is backed up, but I definitely won't be able to access the backup while traveling. I'd like to maximize the probability that I can keep using my computer (and all its current files) while traveling. Update I bit the bullet and ran fsck -fy from single-user mode. It only needed one pass (modification) to reach the "okay" stage. However, rebooting took nearly 5 min and involved several rounds of scratchy sounds and a few bad clicks. I'm now back to kind of using my computer (the same files are missing as before). When I ran live disk verification from Disk Utility this time, however, it reported that the volume appears to be OK. Am I right to infer from the scratchy sounds, however, that my hard drive is still rapidly on its way out? Is there anything else I can do to increase its functionality over the next few weeks?

    Read the article

  • Deleting old system folders from a drive that is no longer the windows installation drive

    - by grenade
    I dropped my laptop and was no longer able to boot. There were error messages about a corrupt boot record. Replacing the hard drive and reinstalling Win 7 was how I dealt with it. The old drive still appears to be good and I can read and write to it when I connect it as a second drive and mount as D:. However, if I try to recover the space being used by the windows, programdata, program files & program files(x86) folders, by deleting them I get error messages about needing permission from trustedinstaller. If I set myself as the owner of the folders and retry the delete I get error messages about needing permission from myself! Since I'm pretty sure that I have permission from myself to delete the folders, I can only assume that the OS or file system has gotten its panties twisted. I have tried shift, right click, delete from explorer and also if I run "del /f /s /q D:\Windows" from an admin command prompt, I get a succession of Access is denied messages as well. How do I delete D:\Windows, D:\ProgramData, D:\Program Files & D:\Program Files(x86) from a drive that is not the Windows installation drive?

    Read the article

  • Can&rsquo;t eject external USB or Firewire drive in Windows 7

    - by Kelly Jones
    As a SharePoint developer, I work a lot with Virtual Machines (presently using Windows Virtual PC, with Windows 7).  I’m using these VMs with my laptop, and in order to get better performance, I’ve moved them to external hard drives.  (These drives have faster RPMs, larger caches, and a larger capacity, than the internal drive.)  I have one large external drive at home, another similar drive at the office, and a small, slow portable drive that I carry with me. So, at the end of each day at the office, I copy the files from the external drive to my portable drive and then once I get home, I copy them from the portable to the larger external drive I leave at home.  I do this for a couple of reasons: so I can work at home and secondly, so I have backup copies.  (Often, I feel like I’m in the movie “Office Space” when copying the files before I leave the office). Anyway, after the files are copied, I safely eject the external drives, and then hibernate my laptop.  I’ve been doing this for over a year now, but within the last couple of months I started to have issues disconnecting the drives.  Intermittently, some application/process would have a lock on some file on the drive that would keep Windows from safely ejecting it. After looking into it, I found that it was actually the Windows search service that was accessing the drive! Since I wasn’t using Windows search to look for stuff on these drives, I removed them as locations to index. To do this in Windows 7, you need to go to Indexing Options (just type “Indexing” into the search box in the Start menu…).  One of the choices displayed will then be Indexing Options, so click on it and you should then see a window similar to this:   Click on the Modify button and you’ll see this window: Notice the different drives listed above.  My “FreeAgent XTreme (F:)” drive was checked for some reason, which was causing the indexing service to scan the drive looking for new files to make available in the search results.  Ever since I unchecked this box, I’ve been able to safely eject the drive.

    Read the article

  • CD RIP SLOW on Ubuntu 12.04. How can I increase ripping speed?

    - by anGe
    I'm trying to rip an audio cd from my old library but when I try (with every app) to do that, the process is too slow. For 2 tracks it need more than 2 hour and then it crash! I tried to make: $ sudo hdparm -d1 /dev/sr0 but the response is $ /dev/s$ /dev/sr0: setting using_dma to 1 (on) HDIO_SET_DMA failed: Inappropriate ioctl for device HDIO_GET_DMA failed: Inappropriate ioctl for device r0: setting using_dma to 1 (on) HDIO_SET_DMA failed: Inappropriate ioctl for device HDIO_GET_DMA failed: Inappropriate ioctl for device

    Read the article

  • Burn setup project to CD

    - by OCER
    Hello all, I've never burnt a visual studio program to a CD before. I've made a setup project with all my program files, and it works fine. Do I simply need to burn the following installer files onto the CD and give it to someone? The installer is a folder containing: -DotNetFX35 (Folder): Contains .net requirements for my program. -WIndowsInstaller3_1 (Folder): WindowsInstaller-KB893803-v2-x86.exe -setup.exe -My Installer.msi Sorry for the seemingly easy question. I'm double checking as I have one CD and an impatient employer. Thanks!

    Read the article

  • Can't mount cds after failed Brasero burn

    - by Allan
    Brasero failed to burn a disk recently, and now I can't access CD-ROMS. Even CD-Rs are not not showing. Using Ubuntu 11.10 on a Dell D510 Lattitude laptop. allan@allan-Latitude-D510:~$ cdrecord -checkdrive Device was not specified. Trying to find an appropriate drive... Detected CD-R drive: /dev/cdrw Using /dev/cdrom of unknown capabilities Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'TSSTcorp' Identification : 'DVD+-RW TS-L532B' Revision : 'DE04' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R My CD drive is now useless, and any help on getting it to read/burn would be appreciated.

    Read the article

  • How to access files on a drive from an older system, mounted in a new system?

    - by David Thomas
    I've recently built a new system, after a rather large physical injury was sustained by my previous system (a precarious balance, and gravity, were not a happy mix). Surprisingly the /home drive of that system appears to have more-or-less survived the trauma. However... I decided to use a fresh drive for / (and swap) partition(s), and another fresh drive for the new /home. Now that's working, I decided to install the old /home drive (that I had assumed until now would be entirely dead and without capacity for use) into the new system to recover the files and data (so far as is possible). At this point I've run into a snag: I have no idea how to go about this (with Windows it was relatively easy, the new drive would be the latest character of the alphabet, and go from there). With 'disk utility' (System - Administration - Disk Utitlity) I've worked out which drive it is (/dev/sda) but clicking on 'mount' produces an error: 1: helper failed with: mount: according to mtab, /dev/sdb1 is already mounted on / mount failed ...if it is mounted on / I can't see it. I'm also moderately confused by the disk (device /dev/sda) being referred to as /dev/sdb1. Any and all insights would be incredibly welcome (I've already voted for: Idea #9063: New internal hard drives default automount at Brainstorm). Edited in response to Roland's request for a screenshot of disk utility: Details (so far as I know them): 40GB disk is / and swap, 1.0 TB Samsung is /home 1.0 TB Hitachi is from the old system (and was the old /home drive). Output from sudo fdisk -l pasted below: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bef00 Device Boot Start End Blocks Id System /dev/sda1 1 121601 976760001 83 Linux Disk /dev/sdb: 40.0 GB, 40018599936 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00037652 Device Boot Start End Blocks Id System /dev/sdb1 * 1 4742 38084608 83 Linux /dev/sdb2 4742 4866 993281 5 Extended /dev/sdb5 4742 4866 993280 82 Linux swap / Solaris Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e8d46 Device Boot Start End Blocks Id System /dev/sdc1 1 121602 976760832 83 Linux

    Read the article

  • How to customize live Ubuntu CD with my own branding?

    - by Ahash
    I would like to create a customized UbuntuOS (Live CD/DVD) for my office and house by installing some additional packages. I have followed this link but it doesn't seems to work. Can anyone provide clear instructions? Customize Packages that I want to install: KDE Desktop Enviornment Thunderbird VLC Player WIne Programme Loader Skype Playmouth Manager Super Boot Manager Synaptic Package Manager Changes that I need: Different default Ubuntu wallpaper Installing KDE Environment Changing Boot (Splash) Screen with my customize theme I want to installing ubuntu With 2 Language, Bangla & English Please Note, I do not prefer Remastersys, manual way will be appreciated.

    Read the article

  • Looking for a USB Thumbdrive / Flash drive encryption solution (not TrueCrypt)

    - by Max888
    I am looking for a USB Thumbdrive / Flash drive encryption solution. I have searched the net but I have never come accross a solution which meets the following: Must handle at least 4GB volume If possible, fully portable (no install required required) Does not require admin rights in order to access/write encrypted files on the flash drive Does not corrupt data should the flash drive is removed from a USB port and the data is in a 'unencrypted' status Data is automatically encrypted if the flash drive is removed from a USB port and the data is in a 'unencrypted' status Portable apps must be able to run from the 'unencrypted' volume (in non-admin mode) PLEASE do not mention TrueCrypt as I am not considering (especially for wish list #3) Many thanks! Update 5th October 2009: Still unresolved.

    Read the article

  • Can't boot flash drive on GIGABYTE motherboard

    - by Deltik
    Situation When I try to boot from my flash drive, my GIGABYTE 970A-UD3 motherboard returns this: Loading Operating System ... Boot error All other motherboards I've tried support booting from that flash drive (and a backup flash drive). The operating systems I tried on both flash drives were created with usb-creator-gtk (Ubuntu USB Startup Disk Creator). I know that the motherboard understands that there is an operating system on the flash drives because when I erase them, it complains in an ALL CAPS RAGE that there isn't an operating system, which is correct. How can I boot a flash drive that's bootable from other motherboards on this motherboard? Qualification This question is not a duplicate of this one because directly writing to the flash drive as an ISO 9660 (dd if=operating_system.iso of=/dev/sdb) still does not have the motherboard recognize the operating system. This question should be a duplicate of this one because I provide more information not provided by that poster. This forum thread has broken links and does not have a solution to my problem. Nobody knows what's going on in this forum thread.

    Read the article

  • Get hard drive to spin up upon mouse movement

    - by John
    My storage drive which does not contain the OS stops spinning after a few minutes. This is annoying and totally defeats the purpose of having a fast access drive. The drive will NOT spin up when I use the mouse! It only spins up when accessed. However, I don't want it to spin all the time. I would like it to spin up anytime there is mouse activity so it is at the ready when I am using the computer, but go to sleep during inactivity. Can anyone think of a trick to get a secondary drive to spin up on a mouse movement?

    Read the article

  • Secondary drive corrupted/not reading

    - by Sebastian
    When I connect my Seagate Barracuda to the computer, it shows up on the list of drives in Windows Explorer, but right clicking on it crashes Windows Explorer, opening it won't do anything, and I cannot start disk manager when it is connected. Trying to search the drive also freezes Windows Explorer. I have tried to run CHKDSK on it, and it was "unable to read $J data stream" for the Usn Journal. Also, it was an internal drive, but I pulled it out and hooked it up externally so I could test if it was that drive causing the problems. Is there any way for me to copy the files off of the drive?

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >