Search Results

Search found 1493 results on 60 pages for 'cycle'.

Page 18/60 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

• Disk is spinning down each minute, unable to disable it

  - by lzap

  I played with spindown and APM settings of my Samsung discs and now they spin down every minute. I want to disable it, but it seems it does not accept any of the spindown time or APM values. Nothing works, it's all the same. Please help what values should be proper for it. I do not want it to spin down at all. /dev/sda: ATA device, with non-removable media Model Number: SAMSUNG HD154UI Serial Number: S1Y6J1KZ206527 Firmware Revision: 1AG01118 Standards: Used: ATA-8-ACS revision 3b Supported: 7 6 5 4 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 2930277168 Logical/Physical Sector size: 512 bytes device size with M = 1024*1024: 1430799 MBytes device size with M = 1000*1000: 1500301 MBytes (1500 GB) cache/buffer size = unknown Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 udma7 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE * Advanced Power Management feature set Power-Up In Standby feature set * SET_FEATURES required to spinup after power up SET_MAX security extension Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test Media Card Pass-Through * General Purpose Logging feature set * 64-bit World wide name * WRITE_UNCORRECTABLE_EXT command * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters * NCQ priority information DMA Setup Auto-Activate optimization Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Long Sector Access (AC1) * SCT LBA Segment Access (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count supported: enhanced erase 326min for SECURITY ERASE UNIT. 326min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 50024e900300cca3 NAA : 5 IEEE OUI : 0024e9 Unique ID : 00300cca3 Checksum: correct I have the very same disc which I did not "tuned" and it does not spin. But I do not know where to read the settings from. The hdparm only shows this: Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 Edit: It seems the issue was tuned daemon in RHEL6. It was too aggressive, I turned off disc tuning and it seems they are no longer spinning down.

  Read the article

• Logging network activity of LAMP server using BASH

  - by Yarin

  I've got a Fedora LAMP server on Amazon EC2 functioning as a HTTP pseudo-proxy (Sorry, don't know the terminology- It's not a true proxy where requests are relayed through apache, rather client requests are being translated by a PHP script, which then sends a new request.) I'd like to be able to fully log the HTTP cycle CLIENT - PROXY PROXY - SERVICE SERVICE - PROXY PROXY - CLIENT I'm hoping to do this using BASH tools- thinking netcat? Looking for advice and examples. Thanks!

  Read the article

• Power states in Windows

  - by Kurt

  Does anybody know or have a link to documentation on how the Power Manager of Windows, determines to go to the ACPI power states S1-S4? Are there any settings that can be configured? I know that by default states S1-S3 are disabled in Vista and later (they can be enabled by a group policy). Can Windows cycle through these states while for instance an application is actively running?

  Read the article

• Are there any generic KVM over IP cards/chips for motherboards without any such capability?

  - by eek142

  I have a remote server that doesn't have any IP KVM capabilities, meaning I can't remotely power cycle it or access the BIOS. I saw that ASUS offers something for their motherboards here: http://www.asus.com/Server_Workstation/Accessories/ASMB5iKVM/ But is there anything like this available for other motherboards? Even something that I could stash away somewhere in a hard drive bay that simply plugs into the board would be great.

  Read the article

• Laserjet Experts: How many power cycles per month?

  - by marienbad

  I recently got a nice Laserjet 8100DN for my house. I will probably never print more than 1% of its rated monthly duty cycle. But it runs some fairly noisy fans 24/7 if it's left on, so I am in the habit of turning the machine off as soon as I'm done with it. So, for all you who have a lot of experiencing administrating workgroup LaserJets, do you think I'll end up killing it from too many on-off cycles?

  Read the article

• Multiple input languages, switch between two

  - by Mikhail Sayapin

  Hi all, How could I have three or more input languages active (namely English/Russian/Chinese), but cycle with Alt+Shift only between two of them (English/Russian)? Punto Switcher handles this task only with custom shortcuts like Caps Lock or right Ctrl.

  Read the article

• My server freezes within a few hours of logging out. Staying logged in keeps the server running

  - by HappyEngineer

  I have an Ubuntu Godaddy server I use to host mail and webapps. It started having problems a couple months ago. It would lock up and stop responding to anything. I couldn't ssh into it, so I'd have godaddy power cycle the server. I have never seen anything that looked suspicious in the var logs (although I'm no expert at reading them). An fsck turned up no problems. Godaddy replaced the ram, but found no hardware problems. I started logging the output from "top" to a log file and found that even that stops running when the server freezes. Now, here is the crazy part: It got so bad that it would actually go down every few hours, but then it stopped going down. I eventually realized I had left an ssh terminal logged into the machine running top. This seemed unlikely to be a reason, but after the server was up with no problems for a full week (remember, it had been going down after just a few hours), I disconnected from the ssh session. Lo and behold, within a few hours the server froze again! I had them power cycle again and then left another ssh session open with top. It has been going without problems for 8 days now. I told others about this and they hardly believe me. I simply can't imagine what is going on. I don't know what else to try other than to just get a new server and reinstall everything. Does anyone have any ideas about what I can look for to determine what the cause is? Is it possible there's some sort of exploit on the server which only runs if everyone is logged out of the system? EDIT: The power management gone haywire sounds plausible, so I've modified the /boot/grub/menu.lst to boot with acpi=off and apm=off. It appears to have prevented kacpid and kacpid_notify from being in the process list, so I assume I did that right. I've disconnected all my sessions from the server. I'll check later tonight to see if it's still up. If it goes down then I'll try the pinging process idea. EDIT: It went down again. It lasted about a day. I've had them reboot, so now I'll try running "nohup ping -i 5 google.com &" and then disconnect. If it goes down again I'll come back. Hopefully someone will have some more ideas.

  Read the article

• Best Processor for MediaSmart Server?

  - by Kent Boogaart

  I'm trying to figure out what the best possible processor is that I can stick in my HP MediaSmart server. I'm clueless when it comes to correlating CPUs to motherboards. I suspect it's the socket type I care about, but I worry that there's more to it. CPU-Z gives me (excerpt): Processors Information ------------------------------------------------------------------------- Processor 1 ID = 0 Number of cores 1 (max 1) Number of threads 1 (max 1) Name AMD Sempron LE-1150 Codename Sparta Specification AMD Sempron(tm) Processor LE-1150 Package Socket AM2 (940) CPUID F.F.1 Extended CPUID F.7F Brand ID 1 Core Stepping DH-G1 Technology 65 nm Core Speed 1000.0 MHz Multiplier x FSB 5.0 x 200.0 MHz HT Link speed 800.0 MHz Stock frequency 2000 MHz Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64 L1 Data cache 64 KBytes, 2-way set associative, 64-byte line size L1 Instruction cache 64 KBytes, 2-way set associative, 64-byte line size L2 cache 256 KBytes, 16-way set associative, 64-byte line size FID/VID Control yes Max FID 10.0x Max VID 1.350 V P-State FID 0x2 - VID 0x12 (5.0x - 1.100 V) P-State FID 0xA - VID 0x0C (9.0x - 1.250 V) P-State FID 0xC - VID 0x0A (10.0x - 1.300 V) K8 Thermal sensor yes K8 Revision ID 6.0 Attached device PCI device at bus 0, device 24, function 0 Attached device PCI device at bus 0, device 24, function 1 Attached device PCI device at bus 0, device 24, function 2 Attached device PCI device at bus 0, device 24, function 3 Chipset ------------------------------------------------------------------------- Northbridge SiS 761GX rev. 02 Southbridge SiS 966 rev. 59 Graphic Interface AGP AGP Revision 3.0 AGP Transfer Rate 8x AGP SBA supported, enabled Memory Type DDR2 Memory Size 2048 MBytes Channels Single Memory Frequency 200.0 MHz (CPU/5) CAS# latency (CL) 5.0 RAS# to CAS# delay (tRCD) 5 RAS# Precharge (tRP) 5 Cycle Time (tRAS) 15 Bank Cycle Time (tRC) 21 Command Rate (CR) 1T DMI ------------------------------------------------------------------------- DMI BIOS vendor Phoenix Technologies, LTD version R03 date 05/08/2008 DMI System Information manufacturer HP product MediaSmart Server version unknown serial CN68330DGH UUID A482007B-B0CC7593-DD11736A-407B7067 DMI Baseboard vendor Wistron model SJD4 revision A.0 serial unknown DMI System Enclosure manufacturer HP chassis type Desktop chassis serial unknown DMI Processor manufacturer AMD model AMD Sempron(tm) Processor LE-1150 clock speed 2000.0 MHz FSB speed 200.0 MHz multiplier 10.0x DMI Memory Controller correction 64-bit ECC Max module size 4096 MBytes DMI Memory Module designation A0 size 2048 MBytes (double bank) DMI Memory Module designation A1 DMI Memory Module designation A2 DMI Memory Module designation A3 DMI Port Connector designation PS/2 Mouse (internal) port type Mouse Port connector PS/2 connector PS/2 DMI Port Connector designation USB0 (external) port type USB DMI Physical Memory Array location Motherboard usage System Memory correction None max capacity 16384 MBytes max# of devices 4 DMI Memory Device designation A0 format DIMM type unknown total width 64 bits data width 64 bits size 2048 MBytes DMI Memory Device designation A1 format DIMM type unknown total width 64 bits data width 64 bits DMI Memory Device designation A2 format DIMM type unknown total width 64 bits data width 64 bits DMI Memory Device designation A3 format DIMM type unknown total width 64 bits data width 64 bits How do I figure out what options I have for an upgrade?

  Read the article

• URL to reboot a WebSTAR DPC2100R2 cable modem with curl?

  - by jtimberman

  Does anyone know what the magic URL is for rebooting a WebSTAR DPC2100R2 with curl? I used to have a SurfBoard, and the curl command: curl http://192.168.100.1/reset.htm?reset_modem=Restart%20Cable%20Modem Would reset the modem. Sure, I can go power cycle it manually, but it's in the basement and I'm lazy :-). I did find out the URL to elevate the access permission, but nothing about rebooting/resetting yet.

  Read the article

• Key press emulator

  - by SMiX

  Is there utility for linux which emulates keyboard? I want to record(or type script) some keyboard actions and send it to window in infinity cycle.

  Read the article

• is there a ctrl+tab equivalent on OSX

  - by olle

  I want to cycle trough the windows of the currently active application on OSX. Some applications respond to ctrl+tab but they all seem to do something else. I want to switch between entourage mainscreen and the message I am writing for instance. Is there a such a keyword shortcut?

  Read the article

• Network Volumes Keep Changing Names OSX

  - by Koobz

  It seems everytime I reconnect network volumes, my drives cycle through names like /Volumes/user, /Volumes/user~1, /Volumes/user~2 Is there any way to stop this? I just want the name of a network volume to stay the same so that I don't have to keep re-mapping things when I reconnect the drive.

  Read the article

• How can I restore programs that were sent to the background (Ubuntu)

  - by amanda

  I was fooling around with my dual display setup (turned on my second monitor is almost all) and a handful of programs that were running seem not to be available anymore. Thunderbird, Gvim, Tomboy ps shows them, but I can't see them. Can't cycle to them with alt-tab. They aren't just in some other window. I'm not even sure how to start figuring out where everything went. Ideas?

  Read the article

• URL to reboot a WebSTAR DPC2100R2 cable modem with curl?

  - by jtimberman

  Does anyone know what the magic URL is for rebooting a WebSTAR DPC2100R2 with curl? I used to have a SurfBoard, and the curl command: curl http://192.168.100.1/reset.htm?reset_modem=Restart%20Cable%20Modem Would reset the modem. Sure, I can go power cycle it manually, but it's in the basement and I'm lazy :-). I did find out the URL to elevate the access permission, but nothing about rebooting/resetting yet.

  Read the article

• How do I remove automatically added keyboard layouts?

  - by Diego

  I have a Spanish keyboard on my notebook, but I use it mostly for English and Chinese writing. This is how I configured the languages: However, Windows added some layouts on its own (probably when connecting via Remote Desktop to computers with different languages/layouts): Those layouts are all part of the AltShift cycle, which is extremely annoying. How can I remove ENG/US and ESP, considering they don't show in the configuration list? Is there a way to prevent them from being added again?

  Read the article

• Restarting an IBM BMC without restarting the server itself

  - by SRobertJames

  I have a few servers with IBM BMC (Baseboard Management Controller). I'd like to power cycle the BMC without restarting the server. Is this possible? How? Note: On one of them, the web interface is down; so I'd need to either do this by physically restarting the BMC (not sure how to do this - even the power button on the server isn't supposed to recycle the BMC, I believe) or via the UDP or SNMP interface (again, not sure how to do that either)

  Read the article

• How can I generate a 10-day report every day using ISA Server 2006?

  - by RichieACC

  We're using ISA Server 2006 (Version 5.0.5723.514) Our ISP imposes a 10GB usage limit per 10 day cycle. What I would like to do is generate a report automatically on a daily basis, showing our usage for the previous 10 days. It would also be nice to send out a notification should the total usage exceed 10GB. Is this possible? If so, how do I set it up?

  Read the article

• Laserjet Experts: How many power cycles per month?

  - by marienbad

  I recently got a nice Laserjet 8100DN for my house. I will probably never print more than 1% of its rated monthly duty cycle. But it runs some fairly noisy fans 24/7 if it's left on, so I am in the habit of turning the machine off as soon as I'm done with it. So, for all you who have a lot of experiencing administrating workgroup LaserJets, do you think I'll end up killing it from too many on-off cycles?

  Read the article

• Creating sequence in SQL Server [closed]

  - by Rajesh Kumar

  I want to create a sequence of numbers in sql server it will have the minimum value and maximum value, I want to cycle if the number reaches the maximum limit. ?

  Read the article

• Multiple keyboard shortcuts for the same command in OS X?

  - by Nik

  I am used to doing Ctrl-Shift-Tab to cycle through tabs. I do slowly pick up the niceness about using Cmd-Shift-[ or ] to do the same on the Mac. I have currently set TextMate to take Ctrl-Shift-Tab to do the tab cycling, but I'd want the Ctrl-Shift-[ or ] in addition to that to perform tab cycling. Is this possible? The reason I ask is because I see that Chrome can do it both ways (not through any configuration of my own of course).

  Read the article

• Are there any well known anti-patterns in the field of system administration?

  - by ojblass

  I know a few common patterns that seem to bedevil nearly every project at some point in its life cycle: Inability to take outages Third party components locking out upgrades Non uniform environments Lack of monitoring and alerting Missing redundancy Lack of Capacity Poor Change Management Too liberal or tight access policies Organizational changes adversely blur infrastructure ownership I was hoping there is some well articulated library of these anti-patterns summarized in a book or web site. I am almost positive that many organizations are learning through trial by fire methods. If not let's start one.

  Read the article

• How can I find out which service is keeping Vista from restarting?

  - by Jeff

  Running Vista on my Toshiba laptop for several years now. Recently, I noticed it will not restart - I have to power cycle it. I have enabled Verbose Status messages, so I know it's stuck at "Stopping services". Is there a way to figure out which service is not stopping? I'm hoping for some kind of log like the bootlog. I've tried looking through the event viewer - no luck there.

  Read the article

• Would SSL prevent replay tampering by the authenticated user

  - by Coder 42

  In the context of a game (HTML5/Flash/Silverlight) which sends data to an online service to record progress (e.g. player killed an orc), would communicating with the service over SSL implicitly prevent the player from recording and replaying the message? I know SSL includes a nonce, but does it remain constant for the duration of the connection or does it change after each request/response cycle?

  Read the article

• Are there any good (safe) ping.fm plugins for pidgin?

  - by leeand00

  I just switched from Digsby to Pidgin after I heard/saw in the installer that they steal your CPU cycles. I was wondering if there were any safe (non-spyware/non-cpu cycle stealer/all other manner of bad things...) plugins for using ping.fm to update Twitter and Facebook using pidgin.

  Read the article

• MacBook Pro dies overnight

  - by fizzy

  I have a 2009 MacBook and if it is not connected to power, it will die overnight. Battery cycle count is 60. Can this behavior be changed to go to "deep sleep" after 30 minutes of inactivity wherein it stops draining the battery?

  Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >