Search Results

Search found 3880 results on 156 pages for 'extended ascii'.

Page 18/156 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • Simple Cisco ASA 5505 config issue

    - by Ben Sebborn
    I have a Cisco ASA setup with two interfaces: inside: 192.168.2.254 / 255.255.255.0 SecLevel:100 outside: 192.168.3.250 / 255.255.255.0 SecLevel: 0 I have a static route setup to allow PCs on the inside network to access the internet via a gateway on the outside interface (3.254): outside 0.0.0.0 0.0.0.0 192.168.3.254 This all works fine. I now need to be able to access a PC on the outside interface (3.253) from a PC on the inside interface on port 35300. I understand I should be able to do this with no problems, as I'm going from a higher security level to a lower one. However I can't get any connection. Do I need to set up a seperate static route? Perhaps the route above is overriding what I need to be able to do (is it routing ALL traffic through the gateway?) Any advice on how to do this would be apprecaited. I am configuring this via ASDM but the config can be seen as below: Result of the command: "show running-config" : Saved : ASA Version 8.2(5) ! hostname ciscoasa domain-name xxx.internal names name 192.168.2.201 dev.xxx.internal description Internal Dev server name 192.168.2.200 Newserver ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 shutdown ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! interface Vlan1 nameif inside security-level 100 ip address 192.168.2.254 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address 192.168.3.250 255.255.255.0 ! ! time-range Workingtime periodic weekdays 9:00 to 18:00 ! ftp mode passive clock timezone GMT/BST 0 clock summer-time GMT/BDT recurring last Sun Mar 1:00 last Sun Oct 2:00 dns domain-lookup inside dns server-group DefaultDNS name-server Newserver domain-name xxx.internal same-security-traffic permit inter-interface object-group service Mysql tcp port-object eq 3306 object-group protocol TCPUDP protocol-object udp protocol-object tcp access-list inside_access_in extended permit ip any any access-list outside_access_in remark ENABLES OUTSDIE ACCESS TO DEV SERVER! access-list outside_access_in extended permit tcp any interface outside eq www time-range Workingtime inactive access-list outside_access_in extended permit tcp host www-1.xxx.com interface outside eq ssh access-list inside_access_in_1 extended permit tcp any any eq www access-list inside_access_in_1 extended permit tcp any any eq https access-list inside_access_in_1 remark Connect to SSH services access-list inside_access_in_1 extended permit tcp any any eq ssh access-list inside_access_in_1 remark Connect to mysql server access-list inside_access_in_1 extended permit tcp any host mysql.xxx.com object-group Mysql access-list inside_access_in_1 extended permit tcp any host mysql.xxx.com eq 3312 access-list inside_access_in_1 extended permit object-group TCPUDP host Newserver any eq domain access-list inside_access_in_1 extended permit icmp any any access-list inside_access_in_1 remark Draytek Admin access-list inside_access_in_1 extended permit tcp any 192.168.3.0 255.255.255.0 eq 4433 access-list inside_access_in_1 remark Phone System access-list inside_access_in_1 extended permit tcp any 192.168.3.0 255.255.255.0 eq 35300 log disable pager lines 24 logging enable logging asdm warnings logging from-address [email protected] logging recipient-address [email protected] level errors mtu inside 1500 mtu outside 1500 ip verify reverse-path interface inside ip verify reverse-path interface outside ipv6 access-list inside_access_ipv6_in permit tcp any any eq www ipv6 access-list inside_access_ipv6_in permit tcp any any eq https ipv6 access-list inside_access_ipv6_in permit tcp any any eq ssh ipv6 access-list inside_access_ipv6_in permit icmp6 any any icmp unreachable rate-limit 1 burst-size 1 icmp permit any outside no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www dev.xxx.internal www netmask 255.255.255.255 static (inside,outside) tcp interface ssh dev.xxx.internal ssh netmask 255.255.255.255 access-group inside_access_in in interface inside control-plane access-group inside_access_in_1 in interface inside access-group inside_access_ipv6_in in interface inside access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 192.168.3.254 10 route outside 192.168.3.252 255.255.255.255 192.168.3.252 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication telnet console LOCAL aaa authentication enable console LOCAL

    Read the article

  • Oracle Enterprise Manager 12c Ops Center Jump-Start for Partners

    - by Get_Specialized!
    Following the Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} announcement at Oracle OpenWorld Tokyo, Partners can check out these resources to further learn about Oracle Enterprise Manager 12c Op Center and then use it to optimize your solution/services or offer new ones: Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Product Documentation Oracle Technical Network Resources Online Learning Series for Partners in the OPN Enterprise Manager KnowledgeZone Whitepaper Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Making Infrastructure-as-a-Service in the Enterprise a Reality IDC report: Oracle Enterprise Manager 12c Embraces the Cloud with Integrated Lifecycle Management Follow-up webcast April 12th  Total Cloud Control for Systems Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle Enterprise Manager Ops Center 12c is no extra charge and included in the support contract of Oracle Systems customers.To learn more see the Ops Center Everywhere Program And if you're not already a member, be sure and join the Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle Enterprise Manager KnowledgeZone on the Oracle PartnerNetwork  Portal

    Read the article

  • Why is my metro screen getting extended to half of the second screen?

    - by maximusyoda
    When I extend my desktop to the second screen, it stays fine for a few minutes, but after a while, the first metro screen stretches all the way to half of the second screen. The search bar etc stops working. The desktop itself shares fine. But the metro screen is messed up as well as the resolution. The second screen is using the recommended resolution. All I want is to have an extended screen. The problem occurs in my office Windows 8 laptop as well. Not sure what to do with it. Device: Surface Pro 2 External Monitor: Dell 2208WFP 1680 x 1050 Pixel Resoultion 22''

    Read the article

  • SQL SERVER – MSQL_XP – Wait Type – Day 20 of 28

    - by pinaldave
    In this blog post, I am going to discuss something from my field experience. While consultation, I have seen various wait typed, but one of my customers who has been using SQL Server for all his operations had an interesting issue with a particular wait type. Our customer had more than 100+ SQL Server instances running and the whole server had MSSQL_XP wait type as the most number of wait types. While running sp_who2 and other diagnosis queries, I could not immediately figure out what the issue was because the query with that kind of wait type was nowhere to be found. After a day of research, I was relieved that the solution was very easy to figure out. Let us continue discussing this wait type. From Book On-Line: ?MSQL_XP occurs when a task is waiting for an extended stored procedure to end. SQL Server uses this wait state to detect potential MARS application deadlocks. The wait stops when the extended stored procedure call ends. MSQL_XP Explanation: This wait type is created because of the extended stored procedure. Extended Stored Procedures are executed within SQL Server; however, SQL Server has no control over them. Unless you know what the code for the extended stored procedure is and what it is doing, it is impossible to understand why this wait type is coming up. Reducing MSQL_XP wait: As discussed, it is hard to understand the Extended Stored Procedure if the code for it is not available. In the scenario described at the beginning of this post, our client was using third-party backup tool. The third-party backup tool was using Extended Stored Procedure. After we learned that this wait type was coming from the extended stored procedure of the backup tool they were using, we contacted the tech team of its vendor. The vendor admitted that the code was not optimal at some places, and within that day they had provided the patch. Once the updated version was installed, the issue on this wait type disappeared. As viewed in the wait statistics of all the 100+ SQL Server, there was no more MSSQL_XP wait type found. In simpler terms, you must first identify which Extended Stored Procedure is creating the wait type of MSSQL_XP and see if you can get in touch with the creator of the SP so you can help them optimize the code. If you have encountered this MSSQL_XP wait type, I encourage all of you to write how you managed it. Please do not mention the name of the vendor in your comment as I will not approve it. The focus of this blog post is to understand the wait types; not talk about others. Read all the post in the Wait Types and Queue series. Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussion of Wait Stats in this blog is generic and varies from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

    Read the article

  • How to combine ASCII text files, then encrypt, then decrypt, and put into a 'File' Class? C++

    - by Joel
    For example, if I have three ASCII files: file1.txt file2.txt file3.txt ...and I wanted to combine them into one encrypted file: database.txt Then in the application I would decrypt the database.txt and put each of the original files into a 'File' class on the heap: class File{ public: string getContents(); void setContents(string data); private: string m_data; }; Is there some way to do this? Thanks

    Read the article

  • Is it appropriate to use non-ASCII (natural-language) XML tags?

    - by Vladimir Alexiev
    Is it appropriate to use XML tags (element names) written in non-ASCII natural languages? The XML spec allows it (see Names and Exceptions), but I couldn't find any best practices about this at W3C and related pages. What I'm looking for is practical advice regarding which tools support this, whether important XML-related technologies such as XSLT and XForms may have problems with it, etc.

    Read the article

  • Why does this rsnapshot exclude not work?

    - by bstpierre
    Rsnapshot passes excludes directly to rsync, but rsync's behavior appears inconsistent. I've simplified my rsnapshot backup test to the following directory tree (this tree will be backed up): gorilla:~# find /tmp/snaptest -exec file {} \; /tmp/snaptest: directory /tmp/snaptest/SKIPTHIS: directory /tmp/snaptest/SKIPTHIS/xyz: directory /tmp/snaptest/SKIPTHIS/xyz/testing: ASCII text /tmp/snaptest/SKIPTHIS/bar: ASCII text /tmp/snaptest/SKIPTHIS/foo: ASCII text /tmp/snaptest/SKIPTHIS.txt: ASCII text My config file: config_version 1.2 snapshot_root /tmp/backup-media no_create_root 1 cmd_cp /bin/cp cmd_rm /bin/rm cmd_rsync /usr/bin/rsync cmd_ssh /usr/bin/ssh cmd_logger /usr/bin/logger cmd_du /usr/bin/du interval hourly 6 interval daily 7 interval weekly 4 interval monthly 3 verbose 3 loglevel 3 logfile /media/maxtor-one-touch/rsnapshot.log lockfile /media/maxtor-one-touch/backups/.rsnapshot.pid rsync_short_args -a rsync_long_args --delete --numeric-ids --relative --delete-excluded exclude "SKIPTHIS/**" link_dest 1 backup /tmp/snaptest snaptest The result: gorilla:~# rsnapshot -c /tmp/snaptest.conf hourly echo 12638 > /media/maxtor-one-touch/backups/.rsnapshot.pid mkdir -m 0755 -p /tmp/backup-media/hourly.0/ /usr/bin/rsync -a --delete --numeric-ids --relative --delete-excluded \ --exclude="SKIPTHIS/**" /tmp/snaptest \ /tmp/backup-media/hourly.0/snaptest touch /tmp/backup-media/hourly.0/ rm -f /media/maxtor-one-touch/backups/.rsnapshot.pid gorilla:~# find /tmp/backup-media/ -exec file {} \; /tmp/backup-media/: directory /tmp/backup-media/hourly.0: directory /tmp/backup-media/hourly.0/snaptest: directory /tmp/backup-media/hourly.0/snaptest/tmp: sticky directory /tmp/backup-media/hourly.0/snaptest/tmp/snaptest: directory /tmp/backup-media/hourly.0/snaptest/tmp/snaptest/SKIPTHIS: directory /tmp/backup-media/hourly.0/snaptest/tmp/snaptest/SKIPTHIS/xyz: directory /tmp/backup-media/hourly.0/snaptest/tmp/snaptest/SKIPTHIS/xyz/testing: ASCII text /tmp/backup-media/hourly.0/snaptest/tmp/snaptest/SKIPTHIS/bar: ASCII text /tmp/backup-media/hourly.0/snaptest/tmp/snaptest/SKIPTHIS/foo: ASCII text /tmp/backup-media/hourly.0/snaptest/tmp/snaptest/SKIPTHIS.txt: ASCII text My confusion stems from the fact that if I copy-paste the rsync command echoed by rsnapshot, the SKIPTHIS directory is excluded! (I've tested with various other SKIPTHIS patterns with the same results.) Any idea what's going on?

    Read the article

  • ASA access lists and Egress Filtering

    - by Nate
    Hello. I'm trying to learn how to use a cisco ASA firewall, and I don't really know what I'm doing. I'm trying to set up some egress filtering, with the goal of allowing only the minimal amount of traffic out of the network, even if it originated from within the inside interface. In other words, I'm trying to set up dmz_in and inside_in ACLs as if the inside interface is not too trustworthy. I haven't fully grasped all the concepts yet, so I have a few issues. Assume that we're working with three interfaces: inside, outside, and DMZ. Let's say I have a server (X.Y.Z.1) that has to respond to PING, HTTP, SSH, FTP, MySQL, and SMTP. My ACL looks something like this: access-list outside_in extended permit icmp any host X.Y.Z.1 echo-reply access-list outside_in extended permit tcp any host X.Y.Z.1 eq www access-list outside_in extended permit tcp any host X.Y.Z.1 eq ssh access-list outside_in extended permit tcp any host X.Y.Z.1 eq ftp access-list outside_in extended permit tcp any host X.Y.Z.1 eq ftp-data established access-list outside_in extended permit tcp any host X.Y.Z.1 eq 3306 access-list outside_in extended permit tcp any host X.Y.Z.1 eq smtp and I apply it like this: access-group outside_in in interface outside My question is, what can I do for egress filtering? I want to only allow the minimal amount of traffic out. Do I just "reverse" the rules (i.e. the smtp rule becomes access-list inside_out extended permit tcp host X.Y.Z.1 any eq smtp ) and call it a day, or can I further cull my options? What can I safely block? Furthermore, when doing egress filtering, is it enough to apply "inverted" rules to the outside interface, or should I also look into making dmz_in and inside_in acls? I've heard the term "egress filtering" thrown around a lot, but I don't really know what I'm doing. Any pointers towards good resources and reading would also be helpful, most of the ones I've found presume that I know a lot more than I do.

    Read the article

  • How to ensure that no non-ascii unicode characters are entered ?

    - by Jacques René Mesrine
    Given a java.lang.String instance, I want to verify that it doesn't contain any unicode characters that are not ASCII alphanumerics. e.g. The string should be limited to [A-Za-z0-9.]. What I'm doing now is something very inefficient: import org.apache.commons.lang.CharUtils; String s = ...; char[] ch = s.toCharArray(); for( int i=0; i<ch.length; i++) { if( ! CharUtils.isAsciiAlphanumeric( ch[ i ] ) throw new InvalidInput( ch[i] + " is invalid" ); } Is there a better way to solve this ?

    Read the article

  • Encoding gives "'ascii' codec can't encode character … ordinal not in range(128)"

    - by user140314
    I am working through the Django RSS reader project here. The RSS feed will read something like "OKLAHOMA CITY (AP) — James Harden let". The RSS feed's encoding reads encoding="UTF-8" so I believe I am passing utf-8 to markdown in the code snippet below. The em dash is where it chokes. I get the Django error of "'ascii' codec can't encode character u'\u2014' in position 109: ordinal not in range(128)" which is an UnicodeEncodeError. In the variables being passed I see "OKLAHOMA CITY (AP) \u2014 James Harden". The code line that is not working is: content = content.encode(parsed_feed.encoding, "xmlcharrefreplace") I am using markdown 2.0, django 1.1, and python 2.4. What is the magic sequence of encoding and decoding that I need to do to make this work? Thanks.

    Read the article

  • How do I output Unicode characters as a pair of ASCII characters?

    - by ChrisF
    How do I convert (as an example): Señor Coconut Y Su Conjunto - Introducciõn to: Señor Coconut Y Su Conjunto - Introducciõn I've got an app that creates m3u playlists, but when the track filename, artist or title contains non ASCII characters it doesn't get read properly by the music player so the track doesn't get played. I've discovered that if I write the track out as: #EXTINFUTF8:76,Señor Coconut Y Su Conjunto - Introducciõn #EXTINF:76,Señor Coconut Y Su Conjunto - Introducciõn #UTF8:01-Introducciõn.mp3 01-Introducciõn.mp3 Then the music player will read it correctly and play the track. My problem is that I can't find the information I need to be able to do the conversion properly.

    Read the article

  • Send javax.mail.internet.MimeMessage to a recipient with non-ASCII name?

    - by phyzome
    I am writing a piece of Java code that needs to send mail to users with non-ASCII names. I have figured out how to use UTF-8 for the body, subject line, and generic headers, but I am still stuck on the recipients. Here's what I'd like in the "To:" field: "????????????" <[email protected]>. This lives (for our purposes today) in a String called recip. msg.addRecipients(MimeMessage.RecipientType.TO, recip) gives "?????S]" <[email protected]> msg.addHeader("To", MimeUtility.encodeText(recip, "utf-8", "B")) throws AddressException: Local address contains control or whitespace in string ``=?utf-8?B?IuOCpuOCo+OCreODmuODh+OCo+OCouOBq+OCiOOBhuOBk+OBnSIgPA==?= =?utf-8?B?Zm9vQGV4YW1wbGUuY29tPg==?='' How the heck am I supposed to send this message?

    Read the article

  • What is the most efficient way to encode an arbitrary GUID into readable ASCII (33-127)?

    - by mark
    Dear ladies and sirs. The standard string representation of GUID takes about 36 characters. Which is very nice, but also really wasteful. I am wondering, how to encode it in the shortest possible way using all the ASCII characters in the range 33-127. The naive implementation produces 22 characters, simply because 128 bits / 6 bits yields 22. Huffman encoding is my second best, the only question is how to choose the codes.... Any more ideas? Thanks. P.S. The encoding must be lossless, of course.

    Read the article

  • What tools exist for generating "ASCII Tables", if any?

    - by Billy ONeal
    Consider a block like the following: +-----------------------------------+--------------------------+ | In Baseline | Not in Baseline | +---------------+===================================+==========================+ | In Parent # Do Not Report | Mark ACE as AlwaysReport | +---------------+-----------------------------------+--------------------------+ | Not In Parent # Iff parent depth > baseline depth | Report Always | +---------------+-----------------------------------+--------------------------+ I have seen tables like this used quite frequently. For instance, in Requests for Comments (RFC) documents, the standard format of the document is the text format. Another common case is embedding a small table like this into comments of source code. Are there tools which can take a quick and dirty representation of this in Excel, or possibly some textual format, and format it as a table like this?

    Read the article

  • Why grep -i is so slow? How to do it faster for ASCII?

    - by Vi.
    $ time lzop -d < tvtropes-index.lzo | egrep -B 5 '[Dd][eE][sS][cC][eE][nN][dD] ?[Ff][rR][oO][mM]' real 0m0.438s $ time lzop -d < tvtropes-index.lzo | egrep -B 5 'descend ?from' -i real 0m11.294s Both search insensitively. why -i so slow? How to make fast grep -i without entering things [iI][nN] [tT][hH][iI][sS] [wW][aA][Yy]? For example, perl -ne 'print if /descend ?from/i' works fast, but '-B 5' is not as trivial to implement as in grep (as well as other options).

    Read the article

  • Why is 'grep -i' so slow? How to do it faster for ASCII?

    - by Vi.
    Consider: $ time lzop -d < tvtropes-index.lzo | egrep -B 5 '[Dd][eE][sS][cC][eE][nN][dD] ?[Ff][rR][oO][mM]' real 0m0.438s $ time lzop -d < tvtropes-index.lzo | egrep -B 5 'descend ?from' -i real 0m11.294s Both search case insensitively. Why is the -i version so slow? How do I make grep -i fast without entering things like [iI][nN] [tT][hH][iI][sS] [wW][aA][Yy]? For example, perl -ne 'print if /descend ?from/i' works fast, but '-B 5' is not as trivial to implement as in grep (as well as other options).

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >