Search Results

Search found 26335 results on 1054 pages for 'external display'.

Page 18/1054 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • Writing to external drive runs out of space prematurely

    - by steve
    I have a USB 2.0, 500 GB HDD. I am writing a bunch of data to it, that I previously recovered from the drive. I have formatted the drive in exFAT, since the drive will be used with Windows and OSX. At first, I tried using Windows explorer to move the files over to the drive (about 160 GiB worth) but after copying about 30% of the data (according to TeraCopy), Windows Explorer reported the drive as out of space, and that it was completely full. WinDirStat only showed the size of data that had been copied over... Where did this extra space go? Why is there a 300+ GiB discrepancy between the usage reported by the files and what Explorer sees?

    Read the article

  • harddrive problem (usb external)

    - by masfenix
    Hey guys I am using a Maxtor One Touch 3 given to my by my uncle. It is connected through USB2.0 When I plug it in, XP installs it and says "the device is ready to use". But it dosnt show up on my computer. It dosn't even show up in disk mangement. I then install Acronis Disk Director (which detects it) but marks it as offline. if i try to change it to online, nothing happens. (actually the lights on the HD blink - meaning communication and goes back into offline mode). The lights on the HD return to a solid which mean "working properly". Here is a screenshot: Is there any way to extract the data off the drive? is the drive corrupt? sitll useable? edit: DISKPART screenshot: edit2: I ran Seagate diagnostic tool and this came up: Long Generic - Started 9/10/2010 6:44:36 PM Bad LBA: 0 Unable to repair Long Generic - FAIL 9/10/2010 6:46:41 PM SeaTools Test Code: 4

    Read the article

  • Can I install Ubuntu 12.04 on MacBook 6.1 (Late 2009) on my external hard drive?

    - by tommywinarta
    I have no experience in installing Linux based OS on MacBook, but I already have Windows installed on my Mac. I read some articles saying I can have the Lucid Lynx installed in my Macbook 6.1 and luckily I already got the CD (which was distributed for free back then haha), my question is that can I have the 12.04 installed instead of the 10.04 and what do I need to do that? I also would like to know can I install it on my external hard drive just like installing it on a usb stick? I have viewed the how-to for installing the Lucid Lynx, is it just the same? Thanks in advance!

    Read the article

  • Windows 7 explorer crashing trying to read external hard disk

    - by Mario De Schaepmeester
    I have a 1TB Western Digital hard drive which is almost full and last time I tried to plug it into my laptop, I got a Windows dialog saying "this hard drive needs to be formatted". I did not panic because I have experienced things like this before and I know it's often solved by simply re-inserting the drive. Now however, whenever I plug it in and try to browse it in explorer by going to "computer", the explorer process crashes after a while. I simply close explorer since it takes ages trying to read the disk and nothing happens. After searching on the internet, the best thing to do would be a chkdsk. I tried it via properties in explorer (which also took a good 5 minutes to open up), locks up as well, after waiting a couple of minutes it says there's no access to the disk so a chkdsk is not possible... I want to make clear that I always use safe removal before pulling out the USB cable. Last time however, safe removal just would not work and when trying to shut down Windows, the logoff screen just would not disappear (I've waited at least 10 minutes or so) and I powered off the PC by force. This may be the cause of the problems but the disk was still recognised immediately after that. I really don't want to format this thing because it contains C: clones of 3 computers and a lot of other stuff that I don't want to re-copy. What would be the best course of action? Update I got chkdsk working via the command line. I used the /F and /R options. I already got a bunch of lines saying "file record segment X is unreadable" or whatever it is in English, my OS is Dutch. It looks bad... Will chdsk repair these errors?

    Read the article

  • How do I access an external hard drive plugged into my router?

    - by Shawn
    I am running Ubuntu 11.10 and I own a Netgear N600 Wireless Dual Band Router with a USB port built into it. Naturally, the router came with instructions on how to mount and view this drive with both Windows and Mac, but nothing about Linux. I have an WD Elements 1 TB external HDD that I would like to plug into the router and share across my home network. However, when I plug it in, absolutely nothing happens on my desktop. I checked on two different machines and nothing seems to indicate that the drive has been mounted (or is even seen at all) on either machine. I am fully aware that it may not be possible to do this with a Linux system, but I was hoping someone might have a suggestion. Thanks!

    Read the article

  • Ubuntu 11.10 is on external HDD, how to boot (using grub4dos), and which initrd and vmlinuz to use?

    - by user198003
    I installed Ubuntu 11.10 on external HDD. How can I boot it? I used grub4dos before, and it worked with Fedora distributions. Problem I have now is that I don't know which initrd and vmlinuz files to use. Tried with one I have in /boot directory, but booting did not worked... Can you give me some ideas what to try, do i have to use different initrd and vmlinuz, or I can solve this with other solutions. Also, just to mention that boot goes to BusyBox v1.18.4 command prompt. Thank you in advance!

    Read the article

  • Recovering damaged external hard disk by installing internally

    - by nfarshchi
    I had a 1TB Western Digital (My book series) 3.5" USB3. One day, the SATA to USB3 converter board was damaged and has not worked since. I decided to open the cover and use the HDD as an internal HDD. When I attached the HDD to my PC and booted up in Windows, it asked me which type of ????? I want to use "MBR or GBR" (I dont remember the exact question) I chose MBR and Windows gave me a 1TB empty Hard drive. I tried to recover with recover my files and some other recovery programs but no success. Some one told me that you should choosed GBR instead of MBR . How can I do that now? Another guy told me that the SATA to USB3 converter board is coded to save data on HDD and you can not use them internally without losing data, and I should find another SATA to USB3 board (exact same). It is impossible to find because they are not produced any more. Please help me to find a solution to bring back my data. UPDATE I have 1TB WD "Mybook" USB 3. the board that convert sata to usb3 was damaged. so when the HDD was in the box computer did not recognize it. I opened the box and remove HDD to use it internal. after connecting to my PC windows showed me one massage that I had two choice MBR or GPT I choosed MBR one and windows gave me 1TB empty new volume. I tried many recovery software to recover my data but no success. I brought it to one expert recovery company and they told me the converter board (SATA to USB3) make some encryption on data and with out that board you cannot recover any thing. so I bought another empty WD box and put the HDD inside but even after that also there is no file. I tried to recover again in this state but no success. so I have some unanswered question. does this converted boards make any password or encryption? if yes how can I solve it? does using many recovery programs affected my data? any suggestion or solution for bring back my data? I had use recovery programs such as : recover my files , EaseUS data recovery, easy recovery, test disk, Ontrack easy recovery . Note: when I was using test disk it asked me to choose which partition table I want to use. as it was I choose NTFS, does this made any change on data?

    Read the article

  • Tools to backup an external hard disk

    - by Kaushik Gopal
    Hey people, What's the best method to take an exact copy of my external hard disk? A guru suggested rsync, but I was wondering if there's an easier alternative. I do remember reading somewhere that Acronis also does this. Was looking for your advice on the best option. I'm running Windows. Essentially i have an external HDD which has a lot of stuff synchronized across various pcs. I wish to take a backup of this external Hard disk (ext.HDDs aren't entirely reliable so want to keep a backup of my ext.HDD). Cheers. K

    Read the article

  • Changing the admin edit window display values

    - by Henri
    I have a database table with e.g. a weight value e.g. CREATE TABLE product ( id SERIAL NOT NULL, product_name item_name NOT NULL, . . weight NUMERIC(7,3), -- the weight in kg . . CONSTRAINT PK_product PRIMARY KEY (id) ); This results is the model: class Product(models.Model): . weight = models.DecimalField(max_digits=7, decimal_places=3, blank=True, null=True) . I store the weight in kg's, i.e. 1 kg is stores as 1, 0.1 kg or 100g is stored as 0.1 To make it easier for the user, I display the weight in the Admin list display in grams by specifying: def show_weight(self): if self.weight: weight_in_g = self.weight * 1000 return '%0f' % weight_in_g So if a product weighs e.g. 0.5 kg and is stored in the database as such, the admin list display shows 500 Is there also a way to alter the number shown in the 'Change product' window. This window now shows the value extracted from the database, i.e. 0.5. This will confuse a user when I tell him with the help_text to enter the number in g, while seeing the number of kgs. Before saving the product I override save as follows: def save(self): if self.weight: self.weight = self.weight / 1000 This converts the number entered in grams to kgs.

    Read the article

  • How do I fix a "cannot open display" error when opening an X program after ssh'ing with X11 forwarding enabled?

    - by Daryl Spitzer
    After launching the X11 app (XQuartz 2.3.6, xorg-server 1.4.2-apple56) on my Mac (OS X 10.6.8), opening an terminal in X11 and running xhost +, I then ssh -Y to my Ubuntu 10.04 VM (running on VMware Fusion). When I run gedit .bashrc (for example), I get: (gedit:9510): Gtk-WARNING **: cannot open display: set | grep DISPLAY returns nothing. But if I ssh -Y into my Ubuntu 11.04 machine, gedit .bashrc works. echo $DISPLAY returns "localhost:10.0". I tried export DISPLAY=localhost:10.0 while sshed into my VM and then running gedit .bashrc, but I get: (gedit:9625): Gtk-WARNING **: cannot open display: localhost:10.0 What could be different in the configuration of the two difference Ubuntu machines that would explain why one works and the other doesn't? Update: As suggested by Zoredache in the comment below, I ran sudo apt-get install xbase-clients, but I continue to have the same problem.

    Read the article

  • Gmail freezes on display:none

    - by kambamsu
    Hi, I have a "div" which i insert in everypage, inside which resides my plugin. In certain pages where i might not need to use the plugin, i do a display:none on the div. This seems to work perfectly fine in all browsers. The only exception to this seems to be the "google.com" pages. Whether it be the search page or the gmail page, it seems to freeze once i do this display:none. By freeze i mean that none of the links are clickable after this. Is there something specific with these pages that i'm missing?? Any help would be appreciated. Thanks

    Read the article

  • How do you cancel an external git diff?

    - by v2k
    I've got vim setup as my external diff tool: [diff] external = git_diff_wrapper !/bin/sh vimdiff "$2" "$5" Say I have 300 files that have been modified; via bash, I type "git diff". It launches 300 vimdiffs sequentially, how do I abort it?

    Read the article

  • Dealing with external processes

    - by Jesse Aldridge
    I've been working on a gui app that needs to manage external processes. Working with external processes leads to a lot of issues that can make a programmer's life difficult. I feel like maintenence on this app is taking an unacceptably long time. I've been trying to list the things that make working with external processes difficult so that I can come up with ways of mitigating the pain. This kind of turned into a rant which I thought I'd post here in order to get some feedback and to provide some guidance to anybody thinking about sailing into these very murky waters. Here's what I've got so far: Output from the child can get mixed up with output from the parent. This can make both outputs misleading and hard to read. It can be hard to tell what came from where. It becomes harder to figure out what's going on when things are asynchronous. Here's a contrived example: import textwrap, os, time from subprocess import Popen test_path = 'test_file.py' with open(test_path, 'w') as file: file.write(textwrap.dedent(''' import time for i in range(3): print 'Hello %i' % i time.sleep(1)''')) proc = Popen('python -B "%s"' % test_path) for i in range(3): print 'Hello %i' % i time.sleep(1) os.remove(test_path) I guess I could have the child process write its output to a file. But it can be annoying to have to open up a file every time I want to see the result of a print statement. If I have code for the child process I could add a label, something like print 'child: Hello %i', but it can be annoying to do that for every print. And it adds some noise to the output. And of course I can't do it if I don't have access to the code. I could manually manage the process output. But then you open up a huge can of worms with threads and polling and stuff like that. A simple solution is to treat processes like synchronous functions, that is, no further code executes until the process completes. In other words, make the process block. But that doesn't work if you're building a gui app. Which brings me to the next problem... Blocking processes cause the gui to become unresponsive. import textwrap, sys, os from subprocess import Popen from PyQt4.QtGui import * from PyQt4.QtCore import * test_path = 'test_file.py' with open(test_path, 'w') as file: file.write(textwrap.dedent(''' import time for i in range(3): print 'Hello %i' % i time.sleep(1)''')) app = QApplication(sys.argv) button = QPushButton('Launch process') def launch_proc(): # Can't move the window until process completes proc = Popen('python -B "%s"' % test_path) proc.communicate() button.connect(button, SIGNAL('clicked()'), launch_proc) button.show() app.exec_() os.remove(test_path) Qt provides a process wrapper of its own called QProcess which can help with this. You can connect functions to signals to capture output relatively easily. This is what I'm currently using. But I'm finding that all these signals behave suspiciously like goto statements and can lead to spaghetti code. I think I want to get sort-of blocking behavior by having the 'finished' signal from QProcess call a function containing all the code that comes after the process call. I think that should work but I'm still a bit fuzzy on the details... Stack traces get interrupted when you go from the child process back to the parent process. If a normal function screws up, you get a nice complete stack trace with filenames and line numbers. If a subprocess screws up, you'll be lucky if you get any output at all. You end up having to do a lot more detective work everytime something goes wrong. Speaking of which, output has a way of disappearing when dealing external processes. Like if you run something via the windows 'cmd' command, the console will pop up, execute the code, and then disappear before you have a chance to see the output. You have to pass the /k flag to make it stick around. Similar issues seem to crop up all the time. I suppose both problems 3 and 4 have the same root cause: no exception handling. Exception handling is meant to be used with functions, it doesn't work with processes. Maybe there's some way to get something like exception handling for processes? I guess that's what stderr is for? But dealing with two different streams can be annoying in itself. Maybe I should look into this more... Processes can hang and stick around in the background without you realizing it. So you end up yelling at your computer cuz it's going so slow until you finally bring up your task manager and see 30 instances of the same process hanging out in the background. Also, hanging background processes can interefere with other instances of the process in various fun ways, such as causing permissions errors by holding a handle to a file or someting like that. It seems like an easy solution to this would be to have the parent process kill the child process on exit if the child process didn't close itself. But if the parent process crashes, cleanup code might not get called and the child can be left hanging. Also, if the parent waits for the child to complete, and the child is in an infinite loop or something, you can end up with two hanging processes. This problem can tie in to problem 2 for extra fun, causing your gui to stop responding entirely and force you to kill everything with the task manager. F***ing quotes Parameters often need to be passed to processes. This is a headache in itself. Especially if you're dealing with file paths. Say... 'C:/My Documents/whatever/'. If you don't have quotes, the string will often be split at the space and interpreted as two arguments. If you need nested quotes you can use ' and ". But if you need to use more than two layers of quotes, you have to do some nasty escaping, for example: "cmd /k 'python \'path 1\' \'path 2\''". A good solution to this problem is passing parameters as a list rather than as a single string. Subprocess allows you to do this. Can't easily return data from a subprocess. You can use stdout of course. But what if you want to throw a print in there for debugging purposes? That's gonna screw up the parent if it's expecting output formatted a certain way. In functions you can print one string and return another and everything works just fine. Obscure command-line flags and a crappy terminal based help system. These are problems I often run into when using os level apps. Like the /k flag I mentioned, for holding a cmd window open, who's idea was that? Unix apps don't tend to be much friendlier in this regard. Hopefully you can use google or StackOverflow to find the answer you need. But if not, you've got a lot of boring reading and frusterating trial and error to do. External factors. This one's kind of fuzzy. But when you leave the relatively sheltered harbor of your own scripts to deal with external processes you find yourself having to deal with the "outside world" to a much greater extent. And that's a scary place. All sorts of things can go wrong. Just to give a random example: the cwd in which a process is run can modify it's behavior. There are probably other issues, but those are the ones I've written down so far. Any other snags you'd like to add? Any suggestions for dealing with these problems?

    Read the article

  • c# resize window over display resolution

    - by Sebastian
    I am total newbie in .Net programming so be patient, please ;-). I have problem with resizing window. I want to resize from my app other app's window and take screenshot of it. I do resizing based on this example: http://blogs.geekdojo.net/richard/archive/2003/09/24/181.aspx. But I have a problem. I work on a laptop with 1024x640 pixels screen resolution but I want to resize my window to 1200x1600 px. I can't do that couse display limitations. Is there any tricky solution to resize window for this resolution and take a screenshot of whole window? I've alos tried Sdesk program witch is suggested here: http://stackoverflow.com/questions/445893/create-window-larger-than-desktop-display-resolution. Any help?

    Read the article

  • How to get QWebKit to display image?

    - by George Edison
    Okay, I have a Qt executable in the same directory as a file logo.png. I call the following: QString msg("<html><body><img src='logo.png' /></body></html>"); webView->setHtml(msg); where webview is the QWebKit pointer However, when I execute the program, the image does not display. I am executing the program from the directory that the image is in... why won't it display?

    Read the article

  • Style:Display and Visibility errors ?

    - by dhaliwaljee
    < table border="1" cellpadding="0" cellspacing="0" width="100%"> < tr> < td>1< /td> < td>1< /td> < td>1< /td> < td>1< /td> < td>1< /td> </tr> < tr style="display:block "> < td>2< /td> < td>2< /td> < td>2< /td> < td>2< /td> < td>2< /td> </ tr> < tr style="visibility:hidden "> < td>3< /td> < td>3< /td> < td>3< /td> < td>3< /td> < td>3< /td> < /tr> < tr style="visibility:hidden "> < td>4< /td> < td>4< /td> < td>4< /td> < td>4< /td> < td>4< /td> < /tr> < tr> < td>5< /td> < td>5< /td> < td>5< /td> < td>5< /td> < td>5< /td> < /tr> < tr> < td>6< /td> < /tr> < tr> < td>7< /td> < /tr> < /table> see the code I am using visibility and display for hidden or showing rows but both have errors Visibility hide the row but do not removed space, like "display:none", I can use "display" but it is not working properly with safari and Firefox. Please give me solution for it. My requirement is:- Hide the row and also removed its space on all browsers.

    Read the article

  • Display the newest result from my database

    - by nogggin1
    Im building a webpage that displays the newest result from a database as a news article. The parts of the database are title, bodytext and created although I wish to keep created hidden. I am quite new to PHP and dont have any idea how to do this, could i please get some help just to display it as: title bodytext i need to be able to connect to the database with my details then display the results in a div i have set up. although i only want to show the newest result! thank you. Ned Perkins

    Read the article

  • Perl: reference to subroutine in external .pm file

    - by Pmarcoen
    I'm having some trouble figuring out how to make a reference to a subroutine in an external .pm file. Right now, I'm doing this : External file package settingsGeneral; sub printScreen { print $_[0]; } Main use settingsGeneral; my $printScreen = settingsGeneral::printScreen; &$printScreen("test"); but this result into an error: Can't use string ("1") as a subroutine ref while "strict refs" in use

    Read the article

  • How to use Eclipse's Display View for Debug?

    - by jzd
    At the link below it explains that the "display view allows you to manipulate live code in a scrapbook type fashion (see Figure 8). To manipulate a variable, simply type the name of the variable in the Display view, and you'll be greeted with a familiar content assist." http://www.ibm.com/developerworks/library/os-ecbug/ However, I am having trouble getting it to work. I have the view open but all the buttons are disabled. I have tried putting code in the view, selecting code in the view, selecting code in other views, while running and while not running debug, but the only button that is ever enabled on the view is "clear console". Suggestions on what I am doing wrong?

    Read the article

  • External XML using AS3.0

    - by vishnubhatla
    Hi, How can i load external xml file in Action Script 3.0, I have seen a tutorial http://webdeginer.blogspot.com/2010/06/external-xml-loading.html, is it right or I have to see any more tutorials. Thanks, K Swamy Vishnubhatla, webdeginer.blogspot.com.

    Read the article

  • CSS- removing horizontal space in list menu using display inline property

    - by Kayote
    Hi All, Im new to CSS and have a set target of learning & publishing my website in CSS by the end of the month. My question: Im trying to build a CSS horizontal menu with hover drop downs, however, when I use the 'display: inline' property with li (list) items, I get horizontal spaces between the li (list) items in the bar. How do I remove this space? Here is the html: <div id="tabas_menu"> <ul> <li id="tabBut0" class="tabBut">Overview</li> <li id="tabBut1" class="tabBut">Collar</li> <li id="tabBut2" class="tabBut">Sleeves</li> <li id="tabBut3" class="tabBut">Body</li> </ul> </div> And here is the CSS: #tabas_menu { position: absolute; background: rgb(123,345,567); top: 110px; left: 200px; } ul#tabas_menu { padding: 0; margin: 0; } .tabBut { display: inline; white-space: list-style: none; background: -webkit-gradient(linear, 0% 0%, 0% 100%, from(rgba(255,142,190,1)),to(rgba(188,22,93,1))); background: -moz-linear-gradient(top, rgba(255,142,190,1), rgba(188,22,93,1)); font-family: helvetica, calibri, sans-serif; font-size: 16px; font-weight: bold; line-height: 20px; text-shadow: 1px 1px 1px rgba(99,99,99,0.5); -moz-border-radius: 0.3em; -moz-box-shadow: 0px 0px 2px rgba(0,0,0,0.5); -webkit-border-radius: 0.3em; -webkit-box-shadow: 0px 0px 2px rgba(0,0,0,0.5); padding: 6px 18px; border: 1px solid rgba(0,0,0,0.4); margin: 0; } I can get the space removed using the 'float: left/right' property but its bugging me as to why I cannot achieve the same effect by just using the display property.

    Read the article

  • Setup a git external for remote repo

    - by Tom
    I'd create a repo which pulls in a remote repo, let's say I'd like to setup jQuery as a submodule for example git://github.com/jquery/jquery.git What would be the process of creating a repo with jQuery as a submodule and adding my own external as a remote repo. Also once this is setup, if I push / pull to my own remote, will the external remain intact?

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >